1# 2# Sensor device configuration 3# 4 5menu "I2C Hardware Bus support" 6 depends on I2C 7 8config I2C_ALI1535 9 tristate "ALI 1535" 10 depends on I2C && PCI 11 help 12 If you say yes to this option, support will be included for the SMB 13 Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB 14 controller is part of the 7101 device, which is an ACPI-compliant 15 Power Management Unit (PMU). 16 17 This driver can also be built as a module. If so, the module 18 will be called i2c-ali1535. 19 20config I2C_ALI1563 21 tristate "ALI 1563" 22 depends on I2C && PCI && EXPERIMENTAL 23 help 24 If you say yes to this option, support will be included for the SMB 25 Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB 26 controller is part of the 7101 device, which is an ACPI-compliant 27 Power Management Unit (PMU). 28 29 This driver can also be built as a module. If so, the module 30 will be called i2c-ali1563. 31 32config I2C_ALI15X3 33 tristate "ALI 15x3" 34 depends on I2C && PCI 35 help 36 If you say yes to this option, support will be included for the 37 Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces. 38 39 This driver can also be built as a module. If so, the module 40 will be called i2c-ali15x3. 41 42config I2C_AMD756 43 tristate "AMD 756/766/768/8111 and nVidia nForce" 44 depends on I2C && PCI 45 help 46 If you say yes to this option, support will be included for the AMD 47 756/766/768 mainboard I2C interfaces. The driver also includes 48 support for the first (SMBus 1.0) I2C interface of the AMD 8111 and 49 the nVidia nForce I2C interface. 50 51 This driver can also be built as a module. If so, the module 52 will be called i2c-amd756. 53 54config I2C_AMD756_S4882 55 tristate "SMBus multiplexing on the Tyan S4882" 56 depends on I2C_AMD756 && EXPERIMENTAL 57 help 58 Enabling this option will add specific SMBus support for the Tyan 59 S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed 60 over 8 different channels, where the various memory module EEPROMs 61 and temperature sensors live. Saying yes here will give you access 62 to these in addition to the trunk. 63 64 This driver can also be built as a module. If so, the module 65 will be called i2c-amd756-s4882. 66 67config I2C_AMD8111 68 tristate "AMD 8111" 69 depends on I2C && PCI 70 help 71 If you say yes to this option, support will be included for the 72 second (SMBus 2.0) AMD 8111 mainboard I2C interface. 73 74 This driver can also be built as a module. If so, the module 75 will be called i2c-amd8111. 76 77config I2C_AU1550 78 tristate "Au1550 SMBus interface" 79 depends on I2C && SOC_AU1550 80 help 81 If you say yes to this option, support will be included for the 82 Au1550 SMBus interface. 83 84 This driver can also be built as a module. If so, the module 85 will be called i2c-au1550. 86 87config I2C_ELEKTOR 88 tristate "Elektor ISA card" 89 depends on I2C && ISA && BROKEN_ON_SMP 90 select I2C_ALGOPCF 91 help 92 This supports the PCF8584 ISA bus I2C adapter. Say Y if you own 93 such an adapter. 94 95 This support is also available as a module. If so, the module 96 will be called i2c-elektor. 97 98config I2C_HYDRA 99 tristate "CHRP Apple Hydra Mac I/O I2C interface" 100 depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL 101 select I2C_ALGOBIT 102 help 103 This supports the use of the I2C interface in the Apple Hydra Mac 104 I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you 105 have such a machine. 106 107 This support is also available as a module. If so, the module 108 will be called i2c-hydra. 109 110config I2C_I801 111 tristate "Intel 82801 (ICH)" 112 depends on I2C && PCI 113 help 114 If you say yes to this option, support will be included for the Intel 115 801 family of mainboard I2C interfaces. Specifically, the following 116 versions of the chipset are supported: 117 82801AA 118 82801AB 119 82801BA 120 82801CA/CAM 121 82801DB 122 82801EB/ER (ICH5/ICH5R) 123 6300ESB 124 ICH6 125 ICH7 126 ESB2 127 ICH8 128 129 This driver can also be built as a module. If so, the module 130 will be called i2c-i801. 131 132config I2C_I810 133 tristate "Intel 810/815" 134 depends on I2C && PCI 135 select I2C_ALGOBIT 136 help 137 If you say yes to this option, support will be included for the Intel 138 810/815 family of mainboard I2C interfaces. Specifically, the 139 following versions of the chipset are supported: 140 i810AA 141 i810AB 142 i810E 143 i815 144 i845G 145 146 This driver can also be built as a module. If so, the module 147 will be called i2c-i810. 148 149config I2C_PXA 150 tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)" 151 depends on I2C && EXPERIMENTAL && ARCH_PXA 152 help 153 If you have devices in the PXA I2C bus, say yes to this option. 154 This driver can also be built as a module. If so, the module 155 will be called i2c-pxa. 156 157config I2C_PXA_SLAVE 158 bool "Intel PXA2XX I2C Slave comms support" 159 depends on I2C_PXA 160 help 161 Support I2C slave mode communications on the PXA I2C bus. This 162 is necessary for systems where the PXA may be a target on the 163 I2C bus. 164 165config I2C_PIIX4 166 tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)" 167 depends on I2C && PCI 168 help 169 If you say yes to this option, support will be included for the Intel 170 PIIX4 family of mainboard I2C interfaces. Specifically, the following 171 versions of the chipset are supported (note that Serverworks is part 172 of Broadcom): 173 Intel PIIX4 174 Intel 440MX 175 ATI IXP200 176 ATI IXP300 177 ATI IXP400 178 Serverworks OSB4 179 Serverworks CSB5 180 Serverworks CSB6 181 Serverworks HT-1000 182 SMSC Victory66 183 184 This driver can also be built as a module. If so, the module 185 will be called i2c-piix4. 186 187config I2C_IBM_IIC 188 tristate "IBM PPC 4xx on-chip I2C interface" 189 depends on IBM_OCP && I2C 190 help 191 Say Y here if you want to use IIC peripheral found on 192 embedded IBM PPC 4xx based systems. 193 194 This driver can also be built as a module. If so, the module 195 will be called i2c-ibm_iic. 196 197config I2C_IOP3XX 198 tristate "Intel IOP3xx and IXP4xx on-chip I2C interface" 199 depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C 200 help 201 Say Y here if you want to use the IIC bus controller on 202 the Intel IOP3xx I/O Processors or IXP4xx Network Processors. 203 204 This driver can also be built as a module. If so, the module 205 will be called i2c-iop3xx. 206 207config I2C_ISA 208 tristate 209 depends on I2C 210 211config I2C_ITE 212 tristate "ITE I2C Adapter" 213 depends on I2C && MIPS_ITE8172 214 select I2C_ALGOITE 215 help 216 This supports the ITE8172 I2C peripheral found on some MIPS 217 systems. Say Y if you have one of these. You should also say Y for 218 the ITE I2C driver algorithm support above. 219 220 This support is also available as a module. If so, the module 221 will be called i2c-ite. 222 223config I2C_IXP4XX 224 tristate "IXP4xx GPIO-Based I2C Interface" 225 depends on I2C && ARCH_IXP4XX 226 select I2C_ALGOBIT 227 help 228 Say Y here if you have an Intel IXP4xx(420,421,422,425) based 229 system and are using GPIO lines for an I2C bus. 230 231 This support is also available as a module. If so, the module 232 will be called i2c-ixp4xx. 233 234config I2C_IXP2000 235 tristate "IXP2000 GPIO-Based I2C Interface" 236 depends on I2C && ARCH_IXP2000 237 select I2C_ALGOBIT 238 help 239 Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based 240 system and are using GPIO lines for an I2C bus. 241 242 This support is also available as a module. If so, the module 243 will be called i2c-ixp2000. 244 245config I2C_POWERMAC 246 tristate "Powermac I2C interface" 247 depends on I2C && PPC_PMAC 248 default y 249 help 250 This exposes the various PowerMac i2c interfaces to the linux i2c 251 layer and to userland. It is used by various drivers on the powemac 252 platform, thus should generally be enabled. 253 254 This support is also available as a module. If so, the module 255 will be called i2c-powermac. 256 257config I2C_MPC 258 tristate "MPC107/824x/85xx/52xx/86xx" 259 depends on I2C && PPC32 260 help 261 If you say yes to this option, support will be included for the 262 built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and 263 MPC85xx/MPC8641 family processors. The driver may also work on 52xx 264 family processors, though interrupts are known not to work. 265 266 This driver can also be built as a module. If so, the module 267 will be called i2c-mpc. 268 269config I2C_NFORCE2 270 tristate "Nvidia nForce2, nForce3 and nForce4" 271 depends on I2C && PCI 272 help 273 If you say yes to this option, support will be included for the Nvidia 274 nForce2, nForce3 and nForce4 families of mainboard I2C interfaces. 275 276 This driver can also be built as a module. If so, the module 277 will be called i2c-nforce2. 278 279config I2C_OCORES 280 tristate "OpenCores I2C Controller" 281 depends on I2C && EXPERIMENTAL 282 help 283 If you say yes to this option, support will be included for the 284 OpenCores I2C controller. For details see 285 http://www.opencores.org/projects.cgi/web/i2c/overview 286 287 This driver can also be built as a module. If so, the module 288 will be called i2c-ocores. 289 290config I2C_PARPORT 291 tristate "Parallel port adapter" 292 depends on I2C && PARPORT 293 select I2C_ALGOBIT 294 help 295 This supports parallel port I2C adapters such as the ones made by 296 Philips or Velleman, Analog Devices evaluation boards, and more. 297 Basically any adapter using the parallel port as an I2C bus with 298 no extra chipset is supported by this driver, or could be. 299 300 This driver is a replacement for (and was inspired by) an older 301 driver named i2c-philips-par. The new driver supports more devices, 302 and makes it easier to add support for new devices. 303 304 An adapter type parameter is now mandatory. Please read the file 305 Documentation/i2c/busses/i2c-parport for details. 306 307 Another driver exists, named i2c-parport-light, which doesn't depend 308 on the parport driver. This is meant for embedded systems. Don't say 309 Y here if you intend to say Y or M there. 310 311 This support is also available as a module. If so, the module 312 will be called i2c-parport. 313 314config I2C_PARPORT_LIGHT 315 tristate "Parallel port adapter (light)" 316 depends on I2C 317 select I2C_ALGOBIT 318 help 319 This supports parallel port I2C adapters such as the ones made by 320 Philips or Velleman, Analog Devices evaluation boards, and more. 321 Basically any adapter using the parallel port as an I2C bus with 322 no extra chipset is supported by this driver, or could be. 323 324 This driver is a light version of i2c-parport. It doesn't depend 325 on the parport driver, and uses direct I/O access instead. This 326 might be prefered on embedded systems where wasting memory for 327 the clean but heavy parport handling is not an option. The 328 drawback is a reduced portability and the impossibility to 329 dasiy-chain other parallel port devices. 330 331 Don't say Y here if you said Y or M to i2c-parport. Saying M to 332 both is possible but both modules should not be loaded at the same 333 time. 334 335 This support is also available as a module. If so, the module 336 will be called i2c-parport-light. 337 338config I2C_PROSAVAGE 339 tristate "S3/VIA (Pro)Savage" 340 depends on I2C && PCI 341 select I2C_ALGOBIT 342 help 343 If you say yes to this option, support will be included for the 344 I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8 345 graphics processors. 346 chipsets supported: 347 S3/VIA KM266/VT8375 aka ProSavage8 348 S3/VIA KM133/VT8365 aka Savage4 349 350 This support is also available as a module. If so, the module 351 will be called i2c-prosavage. 352 353config I2C_RPXLITE 354 tristate "Embedded Planet RPX Lite/Classic support" 355 depends on (RPXLITE || RPXCLASSIC) && I2C 356 select I2C_ALGO8XX 357 358config I2C_S3C2410 359 tristate "S3C2410 I2C Driver" 360 depends on I2C && ARCH_S3C2410 361 help 362 Say Y here to include support for I2C controller in the 363 Samsung S3C2410 based System-on-Chip devices. 364 365config I2C_SAVAGE4 366 tristate "S3 Savage 4" 367 depends on I2C && PCI && EXPERIMENTAL 368 select I2C_ALGOBIT 369 help 370 If you say yes to this option, support will be included for the 371 S3 Savage 4 I2C interface. 372 373 This driver can also be built as a module. If so, the module 374 will be called i2c-savage4. 375 376config I2C_SIBYTE 377 tristate "SiByte SMBus interface" 378 depends on SIBYTE_SB1xxx_SOC && I2C 379 help 380 Supports the SiByte SOC on-chip I2C interfaces (2 channels). 381 382config SCx200_I2C 383 tristate "NatSemi SCx200 I2C using GPIO pins" 384 depends on SCx200_GPIO && I2C 385 select I2C_ALGOBIT 386 help 387 Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. 388 389 If you don't know what to do here, say N. 390 391 This support is also available as a module. If so, the module 392 will be called scx200_i2c. 393 394config SCx200_I2C_SCL 395 int "GPIO pin used for SCL" 396 depends on SCx200_I2C 397 default "12" 398 help 399 Enter the GPIO pin number used for the SCL signal. This value can 400 also be specified with a module parameter. 401 402config SCx200_I2C_SDA 403 int "GPIO pin used for SDA" 404 depends on SCx200_I2C 405 default "13" 406 help 407 Enter the GPIO pin number used for the SSA signal. This value can 408 also be specified with a module parameter. 409 410config SCx200_ACB 411 tristate "Geode ACCESS.bus support" 412 depends on X86_32 && I2C && PCI 413 help 414 Enable the use of the ACCESS.bus controllers on the Geode SCx200 and 415 SC1100 processors and the CS5535 and CS5536 Geode companion devices. 416 417 If you don't know what to do here, say N. 418 419 This support is also available as a module. If so, the module 420 will be called scx200_acb. 421 422config I2C_SIS5595 423 tristate "SiS 5595" 424 depends on I2C && PCI 425 help 426 If you say yes to this option, support will be included for the 427 SiS5595 SMBus (a subset of I2C) interface. 428 429 This driver can also be built as a module. If so, the module 430 will be called i2c-sis5595. 431 432config I2C_SIS630 433 tristate "SiS 630/730" 434 depends on I2C && PCI 435 help 436 If you say yes to this option, support will be included for the 437 SiS630 and SiS730 SMBus (a subset of I2C) interface. 438 439 This driver can also be built as a module. If so, the module 440 will be called i2c-sis630. 441 442config I2C_SIS96X 443 tristate "SiS 96x" 444 depends on I2C && PCI 445 help 446 If you say yes to this option, support will be included for the SiS 447 96x SMBus (a subset of I2C) interfaces. Specifically, the following 448 chipsets are supported: 449 645/961 450 645DX/961 451 645DX/962 452 648/961 453 650/961 454 735 455 745 456 457 This driver can also be built as a module. If so, the module 458 will be called i2c-sis96x. 459 460config I2C_STUB 461 tristate "I2C/SMBus Test Stub" 462 depends on I2C && EXPERIMENTAL && 'm' 463 default 'n' 464 help 465 This module may be useful to developers of SMBus client drivers, 466 especially for certain kinds of sensor chips. 467 468 If you do build this module, be sure to read the notes and warnings 469 in <file:Documentation/i2c/i2c-stub>. 470 471 If you don't know what to do here, definitely say N. 472 473config I2C_VIA 474 tristate "VIA 82C586B" 475 depends on I2C && PCI && EXPERIMENTAL 476 select I2C_ALGOBIT 477 help 478 If you say yes to this option, support will be included for the VIA 479 82C586B I2C interface 480 481 This driver can also be built as a module. If so, the module 482 will be called i2c-via. 483 484config I2C_VIAPRO 485 tristate "VIA 82C596/82C686/823x" 486 depends on I2C && PCI 487 help 488 If you say yes to this option, support will be included for the VIA 489 82C596/82C686/823x I2C interfaces. Specifically, the following 490 chipsets are supported: 491 82C596A/B 492 82C686A/B 493 8231 494 8233 495 8233A 496 8235 497 8237 498 499 This driver can also be built as a module. If so, the module 500 will be called i2c-viapro. 501 502config I2C_VOODOO3 503 tristate "Voodoo 3" 504 depends on I2C && PCI 505 select I2C_ALGOBIT 506 help 507 If you say yes to this option, support will be included for the 508 Voodoo 3 I2C interface. 509 510 This driver can also be built as a module. If so, the module 511 will be called i2c-voodoo3. 512 513config I2C_PCA_ISA 514 tristate "PCA9564 on an ISA bus" 515 depends on I2C 516 select I2C_ALGOPCA 517 default n 518 help 519 This driver supports ISA boards using the Philips PCA 9564 520 Parallel bus to I2C bus controller 521 522 This driver can also be built as a module. If so, the module 523 will be called i2c-pca-isa. 524 525 This device is almost undetectable and using this driver on a 526 system which doesn't have this device will result in long 527 delays when I2C/SMBus chip drivers are loaded (e.g. at boot 528 time). If unsure, say N. 529 530config I2C_MV64XXX 531 tristate "Marvell mv64xxx I2C Controller" 532 depends on I2C && MV64X60 && EXPERIMENTAL 533 help 534 If you say yes to this option, support will be included for the 535 built-in I2C interface on the Marvell 64xxx line of host bridges. 536 537 This driver can also be built as a module. If so, the module 538 will be called i2c-mv64xxx. 539 540endmenu 541