xref: /linux/drivers/hwtracing/coresight/Kconfig (revision a06c3fad49a50d5d5eb078f93e70f4d3eca5d5a5)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Coresight configuration
4#
5menuconfig CORESIGHT
6	tristate "CoreSight Tracing Support"
7	depends on ARM || ARM64
8	depends on OF || ACPI
9	select ARM_AMBA
10	select PERF_EVENTS
11	select CONFIGFS_FS
12	help
13	  This framework provides a kernel interface for the CoreSight debug
14	  and trace drivers to register themselves with. It's intended to build
15	  a topological view of the CoreSight components based on a DT
16	  specification and configure the right series of components when a
17	  trace source gets enabled.
18
19	  To compile this driver as a module, choose M here: the
20	  module will be called coresight.
21
22if CORESIGHT
23config CORESIGHT_LINKS_AND_SINKS
24	tristate "CoreSight Link and Sink drivers"
25	help
26	  This enables support for CoreSight link and sink drivers that are
27	  responsible for transporting and collecting the trace data
28	  respectively.  Link and sinks are dynamically aggregated with a trace
29	  entity at run time to form a complete trace path.
30
31	  To compile these drivers as modules, choose M here: the
32	  modules will be called coresight-funnel and coresight-replicator.
33
34config CORESIGHT_LINK_AND_SINK_TMC
35	tristate "Coresight generic TMC driver"
36
37	depends on CORESIGHT_LINKS_AND_SINKS
38	help
39	  This enables support for the Trace Memory Controller driver.
40	  Depending on its configuration the device can act as a link (embedded
41	  trace router - ETR) or sink (embedded trace FIFO).  The driver
42	  complies with the generic implementation of the component without
43	  special enhancement or added features.
44
45	  To compile this driver as a module, choose M here: the
46	  module will be called coresight-tmc.
47
48config CORESIGHT_CATU
49	tristate "Coresight Address Translation Unit (CATU) driver"
50	depends on CORESIGHT_LINK_AND_SINK_TMC
51	help
52	   Enable support for the Coresight Address Translation Unit (CATU).
53	   CATU supports a scatter gather table of 4K pages, with forward/backward
54	   lookup. CATU helps TMC ETR to use a large physically non-contiguous trace
55	   buffer by translating the addresses used by ETR to the physical address
56	   by looking up the provided table. CATU can also be used in pass-through
57	   mode where the address is not translated.
58
59	   To compile this driver as a module, choose M here: the
60	   module will be called coresight-catu.
61
62config CORESIGHT_SINK_TPIU
63	tristate "Coresight generic TPIU driver"
64	depends on CORESIGHT_LINKS_AND_SINKS
65	help
66	  This enables support for the Trace Port Interface Unit driver,
67	  responsible for bridging the gap between the on-chip coresight
68	  components and a trace for bridging the gap between the on-chip
69	  coresight components and a trace port collection engine, typically
70	  connected to an external host for use case capturing more traces than
71	  the on-board coresight memory can handle.
72
73	  To compile this driver as a module, choose M here: the
74	  module will be called coresight-tpiu.
75
76config CORESIGHT_SINK_ETBV10
77	tristate "Coresight ETBv1.0 driver"
78	depends on CORESIGHT_LINKS_AND_SINKS
79	help
80	  This enables support for the Embedded Trace Buffer version 1.0 driver
81	  that complies with the generic implementation of the component without
82	  special enhancement or added features.
83
84	  To compile this driver as a module, choose M here: the
85	  module will be called coresight-etb10.
86
87config CORESIGHT_SOURCE_ETM3X
88	tristate "CoreSight Embedded Trace Macrocell 3.x driver"
89	depends on !ARM64
90	select CORESIGHT_LINKS_AND_SINKS
91	help
92	  This driver provides support for processor ETM3.x and PTM1.x modules,
93	  which allows tracing the instructions that a processor is executing
94	  This is primarily useful for instruction level tracing.  Depending
95	  the ETM version data tracing may also be available.
96
97	  To compile this driver as a module, choose M here: the
98	  module will be called coresight-etm3x.
99
100config CORESIGHT_SOURCE_ETM4X
101	tristate "CoreSight ETMv4.x / ETE driver"
102	depends on ARM64
103	select CORESIGHT_LINKS_AND_SINKS
104	select PID_IN_CONTEXTIDR
105	help
106	  This driver provides support for the CoreSight Embedded Trace Macrocell
107	  version 4.x and the Embedded Trace Extensions (ETE). Both are CPU tracer
108	  modules, tracing the instructions that a processor is executing. This is
109	  primarily useful for instruction level tracing.
110
111	  To compile this driver as a module, choose M here: the
112	  module will be called coresight-etm4x.
113
114config ETM4X_IMPDEF_FEATURE
115	bool "Control implementation defined overflow support in ETM 4.x driver"
116	depends on CORESIGHT_SOURCE_ETM4X
117	help
118	  This control provides implementation define control for CoreSight
119	  ETM 4.x tracer module that can't reduce commit rate automatically.
120	  This avoids overflow between the ETM tracer module and the cpu core.
121
122config CORESIGHT_STM
123	tristate "CoreSight System Trace Macrocell driver"
124	depends on (ARM && !(CPU_32v3 || CPU_32v4 || CPU_32v4T)) || ARM64
125	select CORESIGHT_LINKS_AND_SINKS
126	select STM
127	help
128	  This driver provides support for hardware assisted software
129	  instrumentation based tracing. This is primarily used for
130	  logging useful software events or data coming from various entities
131	  in the system, possibly running different OSs
132
133	  To compile this driver as a module, choose M here: the
134	  module will be called coresight-stm.
135
136config CORESIGHT_CPU_DEBUG
137	tristate "CoreSight CPU Debug driver"
138	depends on ARM || ARM64
139	depends on DEBUG_FS
140	help
141	  This driver provides support for coresight debugging module. This
142	  is primarily used to dump sample-based profiling registers when
143	  system triggers panic, the driver will parse context registers so
144	  can quickly get to know program counter (PC), secure state,
145	  exception level, etc. Before use debugging functionality, platform
146	  needs to ensure the clock domain and power domain are enabled
147	  properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst
148	  for detailed description and the example for usage.
149
150	  To compile this driver as a module, choose M here: the
151	  module will be called coresight-cpu-debug.
152
153config CORESIGHT_CPU_DEBUG_DEFAULT_ON
154	bool "Enable CoreSight CPU Debug by default"
155	depends on CORESIGHT_CPU_DEBUG
156	help
157	  Say Y here to enable the CoreSight Debug panic-debug by default. This
158	  can also be enabled via debugfs, but this ensures the debug feature
159	  is enabled as early as possible.
160
161	  Has the same effect as setting coresight_cpu_debug.enable=1 on the
162	  kernel command line.
163
164	  Say N if unsure.
165
166config CORESIGHT_CTI
167	tristate "CoreSight Cross Trigger Interface (CTI) driver"
168	depends on ARM || ARM64
169	help
170	  This driver provides support for CoreSight CTI and CTM components.
171	  These provide hardware triggering events between CoreSight trace
172	  source and sink components. These can be used to halt trace or
173	  inject events into the trace stream. CTI also provides a software
174	  control to trigger the same halt events. This can provide fast trace
175	  halt compared to disabling sources and sinks normally in driver
176	  software.
177
178	  To compile this driver as a module, choose M here: the
179	  module will be called coresight-cti.
180
181config CORESIGHT_CTI_INTEGRATION_REGS
182	bool "Access CTI CoreSight Integration Registers"
183	depends on CORESIGHT_CTI
184	help
185	  This option adds support for the CoreSight integration registers on
186	  this device. The integration registers allow the exploration of the
187	  CTI trigger connections between this and other devices.These
188	  registers are not used in normal operation and can leave devices in
189	  an inconsistent state.
190
191config CORESIGHT_TRBE
192	tristate "Trace Buffer Extension (TRBE) driver"
193	depends on ARM64 && CORESIGHT_SOURCE_ETM4X
194	help
195	  This driver provides support for percpu Trace Buffer Extension (TRBE).
196	  TRBE always needs to be used along with its corresponding percpu ETE
197	  component. ETE generates trace data which is then captured with TRBE.
198	  Unlike traditional sink devices, TRBE is a CPU feature accessible via
199	  system registers. But its explicit dependency with trace unit (ETE)
200	  requires it to be plugged in as a coresight sink device.
201
202	  To compile this driver as a module, choose M here: the module will be
203	  called coresight-trbe.
204
205config ULTRASOC_SMB
206	tristate "Ultrasoc system memory buffer drivers"
207	depends on ACPI || COMPILE_TEST
208	depends on ARM64 && CORESIGHT_LINKS_AND_SINKS
209	help
210	  This driver provides support for the Ultrasoc system memory buffer (SMB).
211	  SMB is responsible for receiving the trace data from Coresight ETM devices
212	  and storing them to a system buffer.
213
214	  To compile this driver as a module, choose M here: the module will be
215	  called ultrasoc-smb.
216
217config CORESIGHT_TPDM
218	tristate "CoreSight Trace, Profiling & Diagnostics Monitor driver"
219	select CORESIGHT_LINKS_AND_SINKS
220	select CORESIGHT_TPDA
221	help
222	  This driver provides support for configuring monitor. Monitors are
223	  primarily responsible for data set collection and support the
224	  ability to collect any permutation of data set types.
225
226	  To compile this driver as a module, choose M here: the module will be
227	  called coresight-tpdm.
228
229config CORESIGHT_TPDA
230	tristate "CoreSight Trace, Profiling & Diagnostics Aggregator driver"
231	help
232	  This driver provides support for configuring aggregator. This is
233	  primarily useful for pulling the data sets from one or more
234	  attached monitors and pushing the resultant data out. Multiple
235	  monitors are connected on different input ports of TPDA.
236
237	  To compile this driver as a module, choose M here: the module will be
238	  called coresight-tpda.
239
240config CORESIGHT_DUMMY
241	tristate "Dummy driver support"
242	help
243	  Enables support for dummy driver. Dummy driver can be used for
244	  CoreSight sources/sinks that are owned and configured by some
245	  other subsystem and use Linux drivers to configure rest of trace
246	  path.
247
248	  To compile this driver as a module, choose M here: the module will be
249	  called coresight-dummy.
250endif
251