1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * OMAP hardware spinlock driver 4 * 5 * Copyright (C) 2010-2021 Texas Instruments Incorporated - https://www.ti.com 6 * 7 * Contact: Simon Que <sque@ti.com> 8 * Hari Kanigeri <h-kanigeri2@ti.com> 9 * Ohad Ben-Cohen <ohad@wizery.com> 10 * Suman Anna <s-anna@ti.com> 11 */ 12 13 #include <linux/kernel.h> 14 #include <linux/module.h> 15 #include <linux/device.h> 16 #include <linux/delay.h> 17 #include <linux/io.h> 18 #include <linux/bitops.h> 19 #include <linux/pm_runtime.h> 20 #include <linux/slab.h> 21 #include <linux/spinlock.h> 22 #include <linux/hwspinlock.h> 23 #include <linux/of.h> 24 #include <linux/platform_device.h> 25 26 #include "hwspinlock_internal.h" 27 28 /* Spinlock register offsets */ 29 #define SYSSTATUS_OFFSET 0x0014 30 #define LOCK_BASE_OFFSET 0x0800 31 32 #define SPINLOCK_NUMLOCKS_BIT_OFFSET (24) 33 34 /* Possible values of SPINLOCK_LOCK_REG */ 35 #define SPINLOCK_NOTTAKEN (0) /* free */ 36 #define SPINLOCK_TAKEN (1) /* locked */ 37 38 static int omap_hwspinlock_trylock(struct hwspinlock *lock) 39 { 40 void __iomem *lock_addr = lock->priv; 41 42 /* attempt to acquire the lock by reading its value */ 43 return (SPINLOCK_NOTTAKEN == readl(lock_addr)); 44 } 45 46 static void omap_hwspinlock_unlock(struct hwspinlock *lock) 47 { 48 void __iomem *lock_addr = lock->priv; 49 50 /* release the lock by writing 0 to it */ 51 writel(SPINLOCK_NOTTAKEN, lock_addr); 52 } 53 54 /* 55 * relax the OMAP interconnect while spinning on it. 56 * 57 * The specs recommended that the retry delay time will be 58 * just over half of the time that a requester would be 59 * expected to hold the lock. 60 * 61 * The number below is taken from an hardware specs example, 62 * obviously it is somewhat arbitrary. 63 */ 64 static void omap_hwspinlock_relax(struct hwspinlock *lock) 65 { 66 ndelay(50); 67 } 68 69 static const struct hwspinlock_ops omap_hwspinlock_ops = { 70 .trylock = omap_hwspinlock_trylock, 71 .unlock = omap_hwspinlock_unlock, 72 .relax = omap_hwspinlock_relax, 73 }; 74 75 static int omap_hwspinlock_probe(struct platform_device *pdev) 76 { 77 struct device_node *node = pdev->dev.of_node; 78 struct hwspinlock_device *bank; 79 struct hwspinlock *hwlock; 80 void __iomem *io_base; 81 int num_locks, i, ret; 82 /* Only a single hwspinlock block device is supported */ 83 int base_id = 0; 84 85 if (!node) 86 return -ENODEV; 87 88 io_base = devm_platform_ioremap_resource(pdev, 0); 89 if (IS_ERR(io_base)) 90 return PTR_ERR(io_base); 91 92 /* 93 * make sure the module is enabled and clocked before reading 94 * the module SYSSTATUS register 95 */ 96 pm_runtime_enable(&pdev->dev); 97 ret = pm_runtime_resume_and_get(&pdev->dev); 98 if (ret < 0) 99 goto runtime_err; 100 101 /* Determine number of locks */ 102 i = readl(io_base + SYSSTATUS_OFFSET); 103 i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET; 104 105 /* 106 * runtime PM will make sure the clock of this module is 107 * enabled again iff at least one lock is requested 108 */ 109 ret = pm_runtime_put(&pdev->dev); 110 if (ret < 0) 111 goto runtime_err; 112 113 /* one of the four lsb's must be set, and nothing else */ 114 if (hweight_long(i & 0xf) != 1 || i > 8) { 115 ret = -EINVAL; 116 goto runtime_err; 117 } 118 119 num_locks = i * 32; /* actual number of locks in this device */ 120 121 bank = devm_kzalloc(&pdev->dev, struct_size(bank, lock, num_locks), 122 GFP_KERNEL); 123 if (!bank) { 124 ret = -ENOMEM; 125 goto runtime_err; 126 } 127 128 platform_set_drvdata(pdev, bank); 129 130 for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++) 131 hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i; 132 133 ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops, 134 base_id, num_locks); 135 if (ret) 136 goto runtime_err; 137 138 dev_dbg(&pdev->dev, "Registered %d locks with HwSpinlock core\n", 139 num_locks); 140 141 return 0; 142 143 runtime_err: 144 pm_runtime_disable(&pdev->dev); 145 return ret; 146 } 147 148 static void omap_hwspinlock_remove(struct platform_device *pdev) 149 { 150 struct hwspinlock_device *bank = platform_get_drvdata(pdev); 151 int ret; 152 153 ret = hwspin_lock_unregister(bank); 154 if (ret) { 155 dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret); 156 return; 157 } 158 159 pm_runtime_disable(&pdev->dev); 160 } 161 162 static const struct of_device_id omap_hwspinlock_of_match[] = { 163 { .compatible = "ti,omap4-hwspinlock", }, 164 { .compatible = "ti,am64-hwspinlock", }, 165 { .compatible = "ti,am654-hwspinlock", }, 166 { /* end */ }, 167 }; 168 MODULE_DEVICE_TABLE(of, omap_hwspinlock_of_match); 169 170 static struct platform_driver omap_hwspinlock_driver = { 171 .probe = omap_hwspinlock_probe, 172 .remove_new = omap_hwspinlock_remove, 173 .driver = { 174 .name = "omap_hwspinlock", 175 .of_match_table = omap_hwspinlock_of_match, 176 }, 177 }; 178 179 static int __init omap_hwspinlock_init(void) 180 { 181 return platform_driver_register(&omap_hwspinlock_driver); 182 } 183 /* board init code might need to reserve hwspinlocks for predefined purposes */ 184 postcore_initcall(omap_hwspinlock_init); 185 186 static void __exit omap_hwspinlock_exit(void) 187 { 188 platform_driver_unregister(&omap_hwspinlock_driver); 189 } 190 module_exit(omap_hwspinlock_exit); 191 192 MODULE_LICENSE("GPL v2"); 193 MODULE_DESCRIPTION("Hardware spinlock driver for OMAP"); 194 MODULE_AUTHOR("Simon Que <sque@ti.com>"); 195 MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>"); 196 MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>"); 197