xref: /linux/drivers/hwmon/w83627hf.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
3  *		monitoring
4  * Copyright (c) 1998 - 2003  Frodo Looijaard <frodol@dds.nl>,
5  *			      Philip Edelbrock <phil@netroedge.com>,
6  *			      and Mark Studebaker <mdsxyz123@yahoo.com>
7  * Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
8  * Copyright (c) 2007 - 1012  Jean Delvare <jdelvare@suse.de>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2 of the License, or
13  * (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23  */
24 
25 /*
26  * Supports following chips:
27  *
28  * Chip		#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
29  * w83627hf	9	3	2	3	0x20	0x5ca3	no	yes(LPC)
30  * w83627thf	7	3	3	3	0x90	0x5ca3	no	yes(LPC)
31  * w83637hf	7	3	3	3	0x80	0x5ca3	no	yes(LPC)
32  * w83687thf	7	3	3	3	0x90	0x5ca3	no	yes(LPC)
33  * w83697hf	8	2	2	2	0x60	0x5ca3	no	yes(LPC)
34  *
35  * For other winbond chips, and for i2c support in the above chips,
36  * use w83781d.c.
37  *
38  * Note: automatic ("cruise") fan control for 697, 637 & 627thf not
39  * supported yet.
40  */
41 
42 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
43 
44 #include <linux/module.h>
45 #include <linux/init.h>
46 #include <linux/slab.h>
47 #include <linux/jiffies.h>
48 #include <linux/platform_device.h>
49 #include <linux/hwmon.h>
50 #include <linux/hwmon-sysfs.h>
51 #include <linux/hwmon-vid.h>
52 #include <linux/err.h>
53 #include <linux/mutex.h>
54 #include <linux/ioport.h>
55 #include <linux/acpi.h>
56 #include <linux/io.h>
57 #include "lm75.h"
58 
59 static struct platform_device *pdev;
60 
61 #define DRVNAME "w83627hf"
62 enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
63 
64 struct w83627hf_sio_data {
65 	enum chips type;
66 	int sioaddr;
67 };
68 
69 static u8 force_i2c = 0x1f;
70 module_param(force_i2c, byte, 0);
71 MODULE_PARM_DESC(force_i2c,
72 		 "Initialize the i2c address of the sensors");
73 
74 static bool init = 1;
75 module_param(init, bool, 0);
76 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
77 
78 static unsigned short force_id;
79 module_param(force_id, ushort, 0);
80 MODULE_PARM_DESC(force_id, "Override the detected device ID");
81 
82 /* modified from kernel/include/traps.c */
83 #define DEV			0x07 /* Register: Logical device select */
84 
85 /* logical device numbers for superio_select (below) */
86 #define W83627HF_LD_FDC		0x00
87 #define W83627HF_LD_PRT		0x01
88 #define W83627HF_LD_UART1	0x02
89 #define W83627HF_LD_UART2	0x03
90 #define W83627HF_LD_KBC		0x05
91 #define W83627HF_LD_CIR		0x06 /* w83627hf only */
92 #define W83627HF_LD_GAME	0x07
93 #define W83627HF_LD_MIDI	0x07
94 #define W83627HF_LD_GPIO1	0x07
95 #define W83627HF_LD_GPIO5	0x07 /* w83627thf only */
96 #define W83627HF_LD_GPIO2	0x08
97 #define W83627HF_LD_GPIO3	0x09
98 #define W83627HF_LD_GPIO4	0x09 /* w83627thf only */
99 #define W83627HF_LD_ACPI	0x0a
100 #define W83627HF_LD_HWM		0x0b
101 
102 #define DEVID			0x20 /* Register: Device ID */
103 
104 #define W83627THF_GPIO5_EN	0x30 /* w83627thf only */
105 #define W83627THF_GPIO5_IOSR	0xf3 /* w83627thf only */
106 #define W83627THF_GPIO5_DR	0xf4 /* w83627thf only */
107 
108 #define W83687THF_VID_EN	0x29 /* w83687thf only */
109 #define W83687THF_VID_CFG	0xF0 /* w83687thf only */
110 #define W83687THF_VID_DATA	0xF1 /* w83687thf only */
111 
112 static inline void
113 superio_outb(struct w83627hf_sio_data *sio, int reg, int val)
114 {
115 	outb(reg, sio->sioaddr);
116 	outb(val, sio->sioaddr + 1);
117 }
118 
119 static inline int
120 superio_inb(struct w83627hf_sio_data *sio, int reg)
121 {
122 	outb(reg, sio->sioaddr);
123 	return inb(sio->sioaddr + 1);
124 }
125 
126 static inline void
127 superio_select(struct w83627hf_sio_data *sio, int ld)
128 {
129 	outb(DEV, sio->sioaddr);
130 	outb(ld,  sio->sioaddr + 1);
131 }
132 
133 static inline void
134 superio_enter(struct w83627hf_sio_data *sio)
135 {
136 	outb(0x87, sio->sioaddr);
137 	outb(0x87, sio->sioaddr);
138 }
139 
140 static inline void
141 superio_exit(struct w83627hf_sio_data *sio)
142 {
143 	outb(0xAA, sio->sioaddr);
144 }
145 
146 #define W627_DEVID 0x52
147 #define W627THF_DEVID 0x82
148 #define W697_DEVID 0x60
149 #define W637_DEVID 0x70
150 #define W687THF_DEVID 0x85
151 #define WINB_ACT_REG 0x30
152 #define WINB_BASE_REG 0x60
153 /* Constants specified below */
154 
155 /* Alignment of the base address */
156 #define WINB_ALIGNMENT		~7
157 
158 /* Offset & size of I/O region we are interested in */
159 #define WINB_REGION_OFFSET	5
160 #define WINB_REGION_SIZE	2
161 
162 /* Where are the sensors address/data registers relative to the region offset */
163 #define W83781D_ADDR_REG_OFFSET 0
164 #define W83781D_DATA_REG_OFFSET 1
165 
166 /* The W83781D registers */
167 /* The W83782D registers for nr=7,8 are in bank 5 */
168 #define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
169 					   (0x554 + (((nr) - 7) * 2)))
170 #define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
171 					   (0x555 + (((nr) - 7) * 2)))
172 #define W83781D_REG_IN(nr)     ((nr < 7) ? (0x20 + (nr)) : \
173 					   (0x550 + (nr) - 7))
174 
175 /* nr:0-2 for fans:1-3 */
176 #define W83627HF_REG_FAN_MIN(nr)	(0x3b + (nr))
177 #define W83627HF_REG_FAN(nr)		(0x28 + (nr))
178 
179 #define W83627HF_REG_TEMP2_CONFIG 0x152
180 #define W83627HF_REG_TEMP3_CONFIG 0x252
181 /* these are zero-based, unlike config constants above */
182 static const u16 w83627hf_reg_temp[]		= { 0x27, 0x150, 0x250 };
183 static const u16 w83627hf_reg_temp_hyst[]	= { 0x3A, 0x153, 0x253 };
184 static const u16 w83627hf_reg_temp_over[]	= { 0x39, 0x155, 0x255 };
185 
186 #define W83781D_REG_BANK 0x4E
187 
188 #define W83781D_REG_CONFIG 0x40
189 #define W83781D_REG_ALARM1 0x459
190 #define W83781D_REG_ALARM2 0x45A
191 #define W83781D_REG_ALARM3 0x45B
192 
193 #define W83781D_REG_BEEP_CONFIG 0x4D
194 #define W83781D_REG_BEEP_INTS1 0x56
195 #define W83781D_REG_BEEP_INTS2 0x57
196 #define W83781D_REG_BEEP_INTS3 0x453
197 
198 #define W83781D_REG_VID_FANDIV 0x47
199 
200 #define W83781D_REG_CHIPID 0x49
201 #define W83781D_REG_WCHIPID 0x58
202 #define W83781D_REG_CHIPMAN 0x4F
203 #define W83781D_REG_PIN 0x4B
204 
205 #define W83781D_REG_VBAT 0x5D
206 
207 #define W83627HF_REG_PWM1 0x5A
208 #define W83627HF_REG_PWM2 0x5B
209 
210 static const u8 W83627THF_REG_PWM_ENABLE[] = {
211 	0x04,		/* FAN 1 mode */
212 	0x04,		/* FAN 2 mode */
213 	0x12,		/* FAN AUX mode */
214 };
215 static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 };
216 
217 #define W83627THF_REG_PWM1		0x01	/* 697HF/637HF/687THF too */
218 #define W83627THF_REG_PWM2		0x03	/* 697HF/637HF/687THF too */
219 #define W83627THF_REG_PWM3		0x11	/* 637HF/687THF too */
220 
221 #define W83627THF_REG_VRM_OVT_CFG 	0x18	/* 637HF/687THF too */
222 
223 static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
224 static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
225                              W83627THF_REG_PWM3 };
226 #define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
227 				    regpwm_627hf[nr] : regpwm[nr])
228 
229 #define W83627HF_REG_PWM_FREQ		0x5C	/* Only for the 627HF */
230 
231 #define W83637HF_REG_PWM_FREQ1		0x00	/* 697HF/687THF too */
232 #define W83637HF_REG_PWM_FREQ2		0x02	/* 697HF/687THF too */
233 #define W83637HF_REG_PWM_FREQ3		0x10	/* 687THF too */
234 
235 static const u8 W83637HF_REG_PWM_FREQ[] = { W83637HF_REG_PWM_FREQ1,
236 					W83637HF_REG_PWM_FREQ2,
237 					W83637HF_REG_PWM_FREQ3 };
238 
239 #define W83627HF_BASE_PWM_FREQ	46870
240 
241 #define W83781D_REG_I2C_ADDR 0x48
242 #define W83781D_REG_I2C_SUBADDR 0x4A
243 
244 /* Sensor selection */
245 #define W83781D_REG_SCFG1 0x5D
246 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
247 #define W83781D_REG_SCFG2 0x59
248 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
249 #define W83781D_DEFAULT_BETA 3435
250 
251 /*
252  * Conversions. Limit checking is only done on the TO_REG
253  * variants. Note that you should be a bit careful with which arguments
254  * these macros are called: arguments may be evaluated more than once.
255  * Fixing this is just not worth it.
256  */
257 #define IN_TO_REG(val)  (clamp_val((((val) + 8) / 16), 0, 255))
258 #define IN_FROM_REG(val) ((val) * 16)
259 
260 static inline u8 FAN_TO_REG(long rpm, int div)
261 {
262 	if (rpm == 0)
263 		return 255;
264 	rpm = clamp_val(rpm, 1, 1000000);
265 	return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
266 }
267 
268 #define TEMP_MIN (-128000)
269 #define TEMP_MAX ( 127000)
270 
271 /*
272  * TEMP: 0.001C/bit (-128C to +127C)
273  * REG: 1C/bit, two's complement
274  */
275 static u8 TEMP_TO_REG(long temp)
276 {
277 	int ntemp = clamp_val(temp, TEMP_MIN, TEMP_MAX);
278 	ntemp += (ntemp < 0 ? -500 : 500);
279 	return (u8)(ntemp / 1000);
280 }
281 
282 static int TEMP_FROM_REG(u8 reg)
283 {
284         return (s8)reg * 1000;
285 }
286 
287 #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
288 
289 #define PWM_TO_REG(val) (clamp_val((val), 0, 255))
290 
291 static inline unsigned long pwm_freq_from_reg_627hf(u8 reg)
292 {
293 	unsigned long freq;
294 	freq = W83627HF_BASE_PWM_FREQ >> reg;
295 	return freq;
296 }
297 static inline u8 pwm_freq_to_reg_627hf(unsigned long val)
298 {
299 	u8 i;
300 	/*
301 	 * Only 5 dividers (1 2 4 8 16)
302 	 * Search for the nearest available frequency
303 	 */
304 	for (i = 0; i < 4; i++) {
305 		if (val > (((W83627HF_BASE_PWM_FREQ >> i) +
306 			    (W83627HF_BASE_PWM_FREQ >> (i+1))) / 2))
307 			break;
308 	}
309 	return i;
310 }
311 
312 static inline unsigned long pwm_freq_from_reg(u8 reg)
313 {
314 	/* Clock bit 8 -> 180 kHz or 24 MHz */
315 	unsigned long clock = (reg & 0x80) ? 180000UL : 24000000UL;
316 
317 	reg &= 0x7f;
318 	/* This should not happen but anyway... */
319 	if (reg == 0)
320 		reg++;
321 	return clock / (reg << 8);
322 }
323 static inline u8 pwm_freq_to_reg(unsigned long val)
324 {
325 	/* Minimum divider value is 0x01 and maximum is 0x7F */
326 	if (val >= 93750)	/* The highest we can do */
327 		return 0x01;
328 	if (val >= 720)	/* Use 24 MHz clock */
329 		return 24000000UL / (val << 8);
330 	if (val < 6)		/* The lowest we can do */
331 		return 0xFF;
332 	else			/* Use 180 kHz clock */
333 		return 0x80 | (180000UL / (val << 8));
334 }
335 
336 #define BEEP_MASK_FROM_REG(val)		((val) & 0xff7fff)
337 #define BEEP_MASK_TO_REG(val)		((val) & 0xff7fff)
338 
339 #define DIV_FROM_REG(val) (1 << (val))
340 
341 static inline u8 DIV_TO_REG(long val)
342 {
343 	int i;
344 	val = clamp_val(val, 1, 128) >> 1;
345 	for (i = 0; i < 7; i++) {
346 		if (val == 0)
347 			break;
348 		val >>= 1;
349 	}
350 	return (u8)i;
351 }
352 
353 /*
354  * For each registered chip, we need to keep some data in memory.
355  * The structure is dynamically allocated.
356  */
357 struct w83627hf_data {
358 	unsigned short addr;
359 	const char *name;
360 	struct device *hwmon_dev;
361 	struct mutex lock;
362 	enum chips type;
363 
364 	struct mutex update_lock;
365 	char valid;		/* !=0 if following fields are valid */
366 	unsigned long last_updated;	/* In jiffies */
367 
368 	u8 in[9];		/* Register value */
369 	u8 in_max[9];		/* Register value */
370 	u8 in_min[9];		/* Register value */
371 	u8 fan[3];		/* Register value */
372 	u8 fan_min[3];		/* Register value */
373 	u16 temp[3];		/* Register value */
374 	u16 temp_max[3];	/* Register value */
375 	u16 temp_max_hyst[3];	/* Register value */
376 	u8 fan_div[3];		/* Register encoding, shifted right */
377 	u8 vid;			/* Register encoding, combined */
378 	u32 alarms;		/* Register encoding, combined */
379 	u32 beep_mask;		/* Register encoding, combined */
380 	u8 pwm[3];		/* Register value */
381 	u8 pwm_enable[3];	/* 1 = manual
382 				 * 2 = thermal cruise (also called SmartFan I)
383 				 * 3 = fan speed cruise
384 				 */
385 	u8 pwm_freq[3];		/* Register value */
386 	u16 sens[3];		/* 1 = pentium diode; 2 = 3904 diode;
387 				 * 4 = thermistor
388 				 */
389 	u8 vrm;
390 	u8 vrm_ovt;		/* Register value, 627THF/637HF/687THF only */
391 
392 #ifdef CONFIG_PM
393 	/* Remember extra register values over suspend/resume */
394 	u8 scfg1;
395 	u8 scfg2;
396 #endif
397 };
398 
399 
400 static int w83627hf_probe(struct platform_device *pdev);
401 static int w83627hf_remove(struct platform_device *pdev);
402 
403 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
404 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);
405 static void w83627hf_update_fan_div(struct w83627hf_data *data);
406 static struct w83627hf_data *w83627hf_update_device(struct device *dev);
407 static void w83627hf_init_device(struct platform_device *pdev);
408 
409 #ifdef CONFIG_PM
410 static int w83627hf_suspend(struct device *dev)
411 {
412 	struct w83627hf_data *data = w83627hf_update_device(dev);
413 
414 	mutex_lock(&data->update_lock);
415 	data->scfg1 = w83627hf_read_value(data, W83781D_REG_SCFG1);
416 	data->scfg2 = w83627hf_read_value(data, W83781D_REG_SCFG2);
417 	mutex_unlock(&data->update_lock);
418 
419 	return 0;
420 }
421 
422 static int w83627hf_resume(struct device *dev)
423 {
424 	struct w83627hf_data *data = dev_get_drvdata(dev);
425 	int i, num_temps = (data->type == w83697hf) ? 2 : 3;
426 
427 	/* Restore limits */
428 	mutex_lock(&data->update_lock);
429 	for (i = 0; i <= 8; i++) {
430 		/* skip missing sensors */
431 		if (((data->type == w83697hf) && (i == 1)) ||
432 		    ((data->type != w83627hf && data->type != w83697hf)
433 		    && (i == 5 || i == 6)))
434 			continue;
435 		w83627hf_write_value(data, W83781D_REG_IN_MAX(i),
436 				     data->in_max[i]);
437 		w83627hf_write_value(data, W83781D_REG_IN_MIN(i),
438 				     data->in_min[i]);
439 	}
440 	for (i = 0; i <= 2; i++)
441 		w83627hf_write_value(data, W83627HF_REG_FAN_MIN(i),
442 				     data->fan_min[i]);
443 	for (i = 0; i < num_temps; i++) {
444 		w83627hf_write_value(data, w83627hf_reg_temp_over[i],
445 				     data->temp_max[i]);
446 		w83627hf_write_value(data, w83627hf_reg_temp_hyst[i],
447 				     data->temp_max_hyst[i]);
448 	}
449 
450 	/* Fixup BIOS bugs */
451 	if (data->type == w83627thf || data->type == w83637hf ||
452 	    data->type == w83687thf)
453 		w83627hf_write_value(data, W83627THF_REG_VRM_OVT_CFG,
454 				     data->vrm_ovt);
455 	w83627hf_write_value(data, W83781D_REG_SCFG1, data->scfg1);
456 	w83627hf_write_value(data, W83781D_REG_SCFG2, data->scfg2);
457 
458 	/* Force re-reading all values */
459 	data->valid = 0;
460 	mutex_unlock(&data->update_lock);
461 
462 	return 0;
463 }
464 
465 static const struct dev_pm_ops w83627hf_dev_pm_ops = {
466 	.suspend = w83627hf_suspend,
467 	.resume = w83627hf_resume,
468 };
469 
470 #define W83627HF_DEV_PM_OPS	(&w83627hf_dev_pm_ops)
471 #else
472 #define W83627HF_DEV_PM_OPS	NULL
473 #endif /* CONFIG_PM */
474 
475 static struct platform_driver w83627hf_driver = {
476 	.driver = {
477 		.name	= DRVNAME,
478 		.pm	= W83627HF_DEV_PM_OPS,
479 	},
480 	.probe		= w83627hf_probe,
481 	.remove		= w83627hf_remove,
482 };
483 
484 static ssize_t
485 show_in_input(struct device *dev, struct device_attribute *devattr, char *buf)
486 {
487 	int nr = to_sensor_dev_attr(devattr)->index;
488 	struct w83627hf_data *data = w83627hf_update_device(dev);
489 	return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in[nr]));
490 }
491 static ssize_t
492 show_in_min(struct device *dev, struct device_attribute *devattr, char *buf)
493 {
494 	int nr = to_sensor_dev_attr(devattr)->index;
495 	struct w83627hf_data *data = w83627hf_update_device(dev);
496 	return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_min[nr]));
497 }
498 static ssize_t
499 show_in_max(struct device *dev, struct device_attribute *devattr, char *buf)
500 {
501 	int nr = to_sensor_dev_attr(devattr)->index;
502 	struct w83627hf_data *data = w83627hf_update_device(dev);
503 	return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_max[nr]));
504 }
505 static ssize_t
506 store_in_min(struct device *dev, struct device_attribute *devattr,
507 	     const char *buf, size_t count)
508 {
509 	int nr = to_sensor_dev_attr(devattr)->index;
510 	struct w83627hf_data *data = dev_get_drvdata(dev);
511 	long val;
512 	int err;
513 
514 	err = kstrtol(buf, 10, &val);
515 	if (err)
516 		return err;
517 
518 	mutex_lock(&data->update_lock);
519 	data->in_min[nr] = IN_TO_REG(val);
520 	w83627hf_write_value(data, W83781D_REG_IN_MIN(nr), data->in_min[nr]);
521 	mutex_unlock(&data->update_lock);
522 	return count;
523 }
524 static ssize_t
525 store_in_max(struct device *dev, struct device_attribute *devattr,
526 	     const char *buf, size_t count)
527 {
528 	int nr = to_sensor_dev_attr(devattr)->index;
529 	struct w83627hf_data *data = dev_get_drvdata(dev);
530 	long val;
531 	int err;
532 
533 	err = kstrtol(buf, 10, &val);
534 	if (err)
535 		return err;
536 
537 	mutex_lock(&data->update_lock);
538 	data->in_max[nr] = IN_TO_REG(val);
539 	w83627hf_write_value(data, W83781D_REG_IN_MAX(nr), data->in_max[nr]);
540 	mutex_unlock(&data->update_lock);
541 	return count;
542 }
543 #define sysfs_vin_decl(offset) \
544 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO,		\
545 			  show_in_input, NULL, offset);		\
546 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO|S_IWUSR,	\
547 			  show_in_min, store_in_min, offset);	\
548 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO|S_IWUSR,	\
549 			  show_in_max, store_in_max, offset);
550 
551 sysfs_vin_decl(1);
552 sysfs_vin_decl(2);
553 sysfs_vin_decl(3);
554 sysfs_vin_decl(4);
555 sysfs_vin_decl(5);
556 sysfs_vin_decl(6);
557 sysfs_vin_decl(7);
558 sysfs_vin_decl(8);
559 
560 /* use a different set of functions for in0 */
561 static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
562 {
563 	long in0;
564 
565 	if ((data->vrm_ovt & 0x01) &&
566 		(w83627thf == data->type || w83637hf == data->type
567 		 || w83687thf == data->type))
568 
569 		/* use VRM9 calculation */
570 		in0 = (long)((reg * 488 + 70000 + 50) / 100);
571 	else
572 		/* use VRM8 (standard) calculation */
573 		in0 = (long)IN_FROM_REG(reg);
574 
575 	return sprintf(buf,"%ld\n", in0);
576 }
577 
578 static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf)
579 {
580 	struct w83627hf_data *data = w83627hf_update_device(dev);
581 	return show_in_0(data, buf, data->in[0]);
582 }
583 
584 static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf)
585 {
586 	struct w83627hf_data *data = w83627hf_update_device(dev);
587 	return show_in_0(data, buf, data->in_min[0]);
588 }
589 
590 static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf)
591 {
592 	struct w83627hf_data *data = w83627hf_update_device(dev);
593 	return show_in_0(data, buf, data->in_max[0]);
594 }
595 
596 static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr,
597 	const char *buf, size_t count)
598 {
599 	struct w83627hf_data *data = dev_get_drvdata(dev);
600 	unsigned long val;
601 	int err;
602 
603 	err = kstrtoul(buf, 10, &val);
604 	if (err)
605 		return err;
606 
607 	mutex_lock(&data->update_lock);
608 
609 	if ((data->vrm_ovt & 0x01) &&
610 		(w83627thf == data->type || w83637hf == data->type
611 		 || w83687thf == data->type))
612 
613 		/* use VRM9 calculation */
614 		data->in_min[0] =
615 			clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
616 	else
617 		/* use VRM8 (standard) calculation */
618 		data->in_min[0] = IN_TO_REG(val);
619 
620 	w83627hf_write_value(data, W83781D_REG_IN_MIN(0), data->in_min[0]);
621 	mutex_unlock(&data->update_lock);
622 	return count;
623 }
624 
625 static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr,
626 	const char *buf, size_t count)
627 {
628 	struct w83627hf_data *data = dev_get_drvdata(dev);
629 	unsigned long val;
630 	int err;
631 
632 	err = kstrtoul(buf, 10, &val);
633 	if (err)
634 		return err;
635 
636 	mutex_lock(&data->update_lock);
637 
638 	if ((data->vrm_ovt & 0x01) &&
639 		(w83627thf == data->type || w83637hf == data->type
640 		 || w83687thf == data->type))
641 
642 		/* use VRM9 calculation */
643 		data->in_max[0] =
644 			clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
645 	else
646 		/* use VRM8 (standard) calculation */
647 		data->in_max[0] = IN_TO_REG(val);
648 
649 	w83627hf_write_value(data, W83781D_REG_IN_MAX(0), data->in_max[0]);
650 	mutex_unlock(&data->update_lock);
651 	return count;
652 }
653 
654 static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL);
655 static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
656 	show_regs_in_min0, store_regs_in_min0);
657 static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
658 	show_regs_in_max0, store_regs_in_max0);
659 
660 static ssize_t
661 show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf)
662 {
663 	int nr = to_sensor_dev_attr(devattr)->index;
664 	struct w83627hf_data *data = w83627hf_update_device(dev);
665 	return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan[nr],
666 				(long)DIV_FROM_REG(data->fan_div[nr])));
667 }
668 static ssize_t
669 show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf)
670 {
671 	int nr = to_sensor_dev_attr(devattr)->index;
672 	struct w83627hf_data *data = w83627hf_update_device(dev);
673 	return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan_min[nr],
674 				(long)DIV_FROM_REG(data->fan_div[nr])));
675 }
676 static ssize_t
677 store_fan_min(struct device *dev, struct device_attribute *devattr,
678 	      const char *buf, size_t count)
679 {
680 	int nr = to_sensor_dev_attr(devattr)->index;
681 	struct w83627hf_data *data = dev_get_drvdata(dev);
682 	unsigned long val;
683 	int err;
684 
685 	err = kstrtoul(buf, 10, &val);
686 	if (err)
687 		return err;
688 
689 	mutex_lock(&data->update_lock);
690 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
691 	w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr),
692 			     data->fan_min[nr]);
693 
694 	mutex_unlock(&data->update_lock);
695 	return count;
696 }
697 #define sysfs_fan_decl(offset)	\
698 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO,			\
699 			  show_fan_input, NULL, offset - 1);		\
700 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
701 			  show_fan_min, store_fan_min, offset - 1);
702 
703 sysfs_fan_decl(1);
704 sysfs_fan_decl(2);
705 sysfs_fan_decl(3);
706 
707 static ssize_t
708 show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
709 {
710 	int nr = to_sensor_dev_attr(devattr)->index;
711 	struct w83627hf_data *data = w83627hf_update_device(dev);
712 
713 	u16 tmp = data->temp[nr];
714 	return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
715 					  : (long) TEMP_FROM_REG(tmp));
716 }
717 
718 static ssize_t
719 show_temp_max(struct device *dev, struct device_attribute *devattr,
720 	      char *buf)
721 {
722 	int nr = to_sensor_dev_attr(devattr)->index;
723 	struct w83627hf_data *data = w83627hf_update_device(dev);
724 
725 	u16 tmp = data->temp_max[nr];
726 	return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
727 					  : (long) TEMP_FROM_REG(tmp));
728 }
729 
730 static ssize_t
731 show_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
732 		   char *buf)
733 {
734 	int nr = to_sensor_dev_attr(devattr)->index;
735 	struct w83627hf_data *data = w83627hf_update_device(dev);
736 
737 	u16 tmp = data->temp_max_hyst[nr];
738 	return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
739 					  : (long) TEMP_FROM_REG(tmp));
740 }
741 
742 static ssize_t
743 store_temp_max(struct device *dev, struct device_attribute *devattr,
744 	       const char *buf, size_t count)
745 {
746 	int nr = to_sensor_dev_attr(devattr)->index;
747 	struct w83627hf_data *data = dev_get_drvdata(dev);
748 	u16 tmp;
749 	long val;
750 	int err;
751 
752 	err = kstrtol(buf, 10, &val);
753 	if (err)
754 		return err;
755 
756 	tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
757 	mutex_lock(&data->update_lock);
758 	data->temp_max[nr] = tmp;
759 	w83627hf_write_value(data, w83627hf_reg_temp_over[nr], tmp);
760 	mutex_unlock(&data->update_lock);
761 	return count;
762 }
763 
764 static ssize_t
765 store_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
766 		    const char *buf, size_t count)
767 {
768 	int nr = to_sensor_dev_attr(devattr)->index;
769 	struct w83627hf_data *data = dev_get_drvdata(dev);
770 	u16 tmp;
771 	long val;
772 	int err;
773 
774 	err = kstrtol(buf, 10, &val);
775 	if (err)
776 		return err;
777 
778 	tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
779 	mutex_lock(&data->update_lock);
780 	data->temp_max_hyst[nr] = tmp;
781 	w83627hf_write_value(data, w83627hf_reg_temp_hyst[nr], tmp);
782 	mutex_unlock(&data->update_lock);
783 	return count;
784 }
785 
786 #define sysfs_temp_decl(offset) \
787 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO,		\
788 			  show_temp, NULL, offset - 1);			\
789 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO|S_IWUSR,	 	\
790 			  show_temp_max, store_temp_max, offset - 1);	\
791 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO|S_IWUSR,	\
792 			  show_temp_max_hyst, store_temp_max_hyst, offset - 1);
793 
794 sysfs_temp_decl(1);
795 sysfs_temp_decl(2);
796 sysfs_temp_decl(3);
797 
798 static ssize_t
799 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
800 {
801 	struct w83627hf_data *data = w83627hf_update_device(dev);
802 	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
803 }
804 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
805 
806 static ssize_t
807 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
808 {
809 	struct w83627hf_data *data = dev_get_drvdata(dev);
810 	return sprintf(buf, "%ld\n", (long) data->vrm);
811 }
812 static ssize_t
813 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
814 {
815 	struct w83627hf_data *data = dev_get_drvdata(dev);
816 	unsigned long val;
817 	int err;
818 
819 	err = kstrtoul(buf, 10, &val);
820 	if (err)
821 		return err;
822 
823 	if (val > 255)
824 		return -EINVAL;
825 	data->vrm = val;
826 
827 	return count;
828 }
829 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
830 
831 static ssize_t
832 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
833 {
834 	struct w83627hf_data *data = w83627hf_update_device(dev);
835 	return sprintf(buf, "%ld\n", (long) data->alarms);
836 }
837 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
838 
839 static ssize_t
840 show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
841 {
842 	struct w83627hf_data *data = w83627hf_update_device(dev);
843 	int bitnr = to_sensor_dev_attr(attr)->index;
844 	return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
845 }
846 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
847 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
848 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
849 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
850 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
851 static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
852 static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
853 static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
854 static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
855 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
856 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
857 static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
858 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
859 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
860 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13);
861 
862 static ssize_t
863 show_beep_mask(struct device *dev, struct device_attribute *attr, char *buf)
864 {
865 	struct w83627hf_data *data = w83627hf_update_device(dev);
866 	return sprintf(buf, "%ld\n",
867 		      (long)BEEP_MASK_FROM_REG(data->beep_mask));
868 }
869 
870 static ssize_t
871 store_beep_mask(struct device *dev, struct device_attribute *attr,
872 		const char *buf, size_t count)
873 {
874 	struct w83627hf_data *data = dev_get_drvdata(dev);
875 	unsigned long val;
876 	int err;
877 
878 	err = kstrtoul(buf, 10, &val);
879 	if (err)
880 		return err;
881 
882 	mutex_lock(&data->update_lock);
883 
884 	/* preserve beep enable */
885 	data->beep_mask = (data->beep_mask & 0x8000)
886 			| BEEP_MASK_TO_REG(val);
887 	w83627hf_write_value(data, W83781D_REG_BEEP_INTS1,
888 			    data->beep_mask & 0xff);
889 	w83627hf_write_value(data, W83781D_REG_BEEP_INTS3,
890 			    ((data->beep_mask) >> 16) & 0xff);
891 	w83627hf_write_value(data, W83781D_REG_BEEP_INTS2,
892 			    (data->beep_mask >> 8) & 0xff);
893 
894 	mutex_unlock(&data->update_lock);
895 	return count;
896 }
897 
898 static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
899 		   show_beep_mask, store_beep_mask);
900 
901 static ssize_t
902 show_beep(struct device *dev, struct device_attribute *attr, char *buf)
903 {
904 	struct w83627hf_data *data = w83627hf_update_device(dev);
905 	int bitnr = to_sensor_dev_attr(attr)->index;
906 	return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
907 }
908 
909 static ssize_t
910 store_beep(struct device *dev, struct device_attribute *attr,
911 		const char *buf, size_t count)
912 {
913 	struct w83627hf_data *data = dev_get_drvdata(dev);
914 	int bitnr = to_sensor_dev_attr(attr)->index;
915 	u8 reg;
916 	unsigned long bit;
917 	int err;
918 
919 	err = kstrtoul(buf, 10, &bit);
920 	if (err)
921 		return err;
922 
923 	if (bit & ~1)
924 		return -EINVAL;
925 
926 	mutex_lock(&data->update_lock);
927 	if (bit)
928 		data->beep_mask |= (1 << bitnr);
929 	else
930 		data->beep_mask &= ~(1 << bitnr);
931 
932 	if (bitnr < 8) {
933 		reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS1);
934 		if (bit)
935 			reg |= (1 << bitnr);
936 		else
937 			reg &= ~(1 << bitnr);
938 		w83627hf_write_value(data, W83781D_REG_BEEP_INTS1, reg);
939 	} else if (bitnr < 16) {
940 		reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
941 		if (bit)
942 			reg |= (1 << (bitnr - 8));
943 		else
944 			reg &= ~(1 << (bitnr - 8));
945 		w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, reg);
946 	} else {
947 		reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS3);
948 		if (bit)
949 			reg |= (1 << (bitnr - 16));
950 		else
951 			reg &= ~(1 << (bitnr - 16));
952 		w83627hf_write_value(data, W83781D_REG_BEEP_INTS3, reg);
953 	}
954 	mutex_unlock(&data->update_lock);
955 
956 	return count;
957 }
958 
959 static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
960 			show_beep, store_beep, 0);
961 static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
962 			show_beep, store_beep, 1);
963 static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
964 			show_beep, store_beep, 2);
965 static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
966 			show_beep, store_beep, 3);
967 static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
968 			show_beep, store_beep, 8);
969 static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
970 			show_beep, store_beep, 9);
971 static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
972 			show_beep, store_beep, 10);
973 static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
974 			show_beep, store_beep, 16);
975 static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
976 			show_beep, store_beep, 17);
977 static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
978 			show_beep, store_beep, 6);
979 static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
980 			show_beep, store_beep, 7);
981 static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
982 			show_beep, store_beep, 11);
983 static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
984 			show_beep, store_beep, 4);
985 static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
986 			show_beep, store_beep, 5);
987 static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO | S_IWUSR,
988 			show_beep, store_beep, 13);
989 static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
990 			show_beep, store_beep, 15);
991 
992 static ssize_t
993 show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
994 {
995 	int nr = to_sensor_dev_attr(devattr)->index;
996 	struct w83627hf_data *data = w83627hf_update_device(dev);
997 	return sprintf(buf, "%ld\n",
998 		       (long) DIV_FROM_REG(data->fan_div[nr]));
999 }
1000 /*
1001  * Note: we save and restore the fan minimum here, because its value is
1002  * determined in part by the fan divisor.  This follows the principle of
1003  * least surprise; the user doesn't expect the fan minimum to change just
1004  * because the divisor changed.
1005  */
1006 static ssize_t
1007 store_fan_div(struct device *dev, struct device_attribute *devattr,
1008 	      const char *buf, size_t count)
1009 {
1010 	int nr = to_sensor_dev_attr(devattr)->index;
1011 	struct w83627hf_data *data = dev_get_drvdata(dev);
1012 	unsigned long min;
1013 	u8 reg;
1014 	unsigned long val;
1015 	int err;
1016 
1017 	err = kstrtoul(buf, 10, &val);
1018 	if (err)
1019 		return err;
1020 
1021 	mutex_lock(&data->update_lock);
1022 
1023 	/* Save fan_min */
1024 	min = FAN_FROM_REG(data->fan_min[nr],
1025 			   DIV_FROM_REG(data->fan_div[nr]));
1026 
1027 	data->fan_div[nr] = DIV_TO_REG(val);
1028 
1029 	reg = (w83627hf_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
1030 	       & (nr==0 ? 0xcf : 0x3f))
1031 	    | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
1032 	w83627hf_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
1033 
1034 	reg = (w83627hf_read_value(data, W83781D_REG_VBAT)
1035 	       & ~(1 << (5 + nr)))
1036 	    | ((data->fan_div[nr] & 0x04) << (3 + nr));
1037 	w83627hf_write_value(data, W83781D_REG_VBAT, reg);
1038 
1039 	/* Restore fan_min */
1040 	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
1041 	w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr), data->fan_min[nr]);
1042 
1043 	mutex_unlock(&data->update_lock);
1044 	return count;
1045 }
1046 
1047 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO|S_IWUSR,
1048 			  show_fan_div, store_fan_div, 0);
1049 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO|S_IWUSR,
1050 			  show_fan_div, store_fan_div, 1);
1051 static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO|S_IWUSR,
1052 			  show_fan_div, store_fan_div, 2);
1053 
1054 static ssize_t
1055 show_pwm(struct device *dev, struct device_attribute *devattr, char *buf)
1056 {
1057 	int nr = to_sensor_dev_attr(devattr)->index;
1058 	struct w83627hf_data *data = w83627hf_update_device(dev);
1059 	return sprintf(buf, "%ld\n", (long) data->pwm[nr]);
1060 }
1061 
1062 static ssize_t
1063 store_pwm(struct device *dev, struct device_attribute *devattr,
1064 	  const char *buf, size_t count)
1065 {
1066 	int nr = to_sensor_dev_attr(devattr)->index;
1067 	struct w83627hf_data *data = dev_get_drvdata(dev);
1068 	unsigned long val;
1069 	int err;
1070 
1071 	err = kstrtoul(buf, 10, &val);
1072 	if (err)
1073 		return err;
1074 
1075 	mutex_lock(&data->update_lock);
1076 
1077 	if (data->type == w83627thf) {
1078 		/* bits 0-3 are reserved  in 627THF */
1079 		data->pwm[nr] = PWM_TO_REG(val) & 0xf0;
1080 		w83627hf_write_value(data,
1081 				     W836X7HF_REG_PWM(data->type, nr),
1082 				     data->pwm[nr] |
1083 				     (w83627hf_read_value(data,
1084 				     W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
1085 	} else {
1086 		data->pwm[nr] = PWM_TO_REG(val);
1087 		w83627hf_write_value(data,
1088 				     W836X7HF_REG_PWM(data->type, nr),
1089 				     data->pwm[nr]);
1090 	}
1091 
1092 	mutex_unlock(&data->update_lock);
1093 	return count;
1094 }
1095 
1096 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0);
1097 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
1098 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2);
1099 
1100 static ssize_t
1101 show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf)
1102 {
1103 	int nr = to_sensor_dev_attr(devattr)->index;
1104 	struct w83627hf_data *data = w83627hf_update_device(dev);
1105 	return sprintf(buf, "%d\n", data->pwm_enable[nr]);
1106 }
1107 
1108 static ssize_t
1109 store_pwm_enable(struct device *dev, struct device_attribute *devattr,
1110 	  const char *buf, size_t count)
1111 {
1112 	int nr = to_sensor_dev_attr(devattr)->index;
1113 	struct w83627hf_data *data = dev_get_drvdata(dev);
1114 	u8 reg;
1115 	unsigned long val;
1116 	int err;
1117 
1118 	err = kstrtoul(buf, 10, &val);
1119 	if (err)
1120 		return err;
1121 
1122 	if (!val || val > 3)	/* modes 1, 2 and 3 are supported */
1123 		return -EINVAL;
1124 	mutex_lock(&data->update_lock);
1125 	data->pwm_enable[nr] = val;
1126 	reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]);
1127 	reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]);
1128 	reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr];
1129 	w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg);
1130 	mutex_unlock(&data->update_lock);
1131 	return count;
1132 }
1133 
1134 static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
1135 						  store_pwm_enable, 0);
1136 static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
1137 						  store_pwm_enable, 1);
1138 static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
1139 						  store_pwm_enable, 2);
1140 
1141 static ssize_t
1142 show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf)
1143 {
1144 	int nr = to_sensor_dev_attr(devattr)->index;
1145 	struct w83627hf_data *data = w83627hf_update_device(dev);
1146 	if (data->type == w83627hf)
1147 		return sprintf(buf, "%ld\n",
1148 			pwm_freq_from_reg_627hf(data->pwm_freq[nr]));
1149 	else
1150 		return sprintf(buf, "%ld\n",
1151 			pwm_freq_from_reg(data->pwm_freq[nr]));
1152 }
1153 
1154 static ssize_t
1155 store_pwm_freq(struct device *dev, struct device_attribute *devattr,
1156 	       const char *buf, size_t count)
1157 {
1158 	int nr = to_sensor_dev_attr(devattr)->index;
1159 	struct w83627hf_data *data = dev_get_drvdata(dev);
1160 	static const u8 mask[]={0xF8, 0x8F};
1161 	unsigned long val;
1162 	int err;
1163 
1164 	err = kstrtoul(buf, 10, &val);
1165 	if (err)
1166 		return err;
1167 
1168 	mutex_lock(&data->update_lock);
1169 
1170 	if (data->type == w83627hf) {
1171 		data->pwm_freq[nr] = pwm_freq_to_reg_627hf(val);
1172 		w83627hf_write_value(data, W83627HF_REG_PWM_FREQ,
1173 				(data->pwm_freq[nr] << (nr*4)) |
1174 				(w83627hf_read_value(data,
1175 				W83627HF_REG_PWM_FREQ) & mask[nr]));
1176 	} else {
1177 		data->pwm_freq[nr] = pwm_freq_to_reg(val);
1178 		w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr],
1179 				data->pwm_freq[nr]);
1180 	}
1181 
1182 	mutex_unlock(&data->update_lock);
1183 	return count;
1184 }
1185 
1186 static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO|S_IWUSR,
1187 			  show_pwm_freq, store_pwm_freq, 0);
1188 static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO|S_IWUSR,
1189 			  show_pwm_freq, store_pwm_freq, 1);
1190 static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO|S_IWUSR,
1191 			  show_pwm_freq, store_pwm_freq, 2);
1192 
1193 static ssize_t
1194 show_temp_type(struct device *dev, struct device_attribute *devattr,
1195 	       char *buf)
1196 {
1197 	int nr = to_sensor_dev_attr(devattr)->index;
1198 	struct w83627hf_data *data = w83627hf_update_device(dev);
1199 	return sprintf(buf, "%ld\n", (long) data->sens[nr]);
1200 }
1201 
1202 static ssize_t
1203 store_temp_type(struct device *dev, struct device_attribute *devattr,
1204 		const char *buf, size_t count)
1205 {
1206 	int nr = to_sensor_dev_attr(devattr)->index;
1207 	struct w83627hf_data *data = dev_get_drvdata(dev);
1208 	unsigned long val;
1209 	u32 tmp;
1210 	int err;
1211 
1212 	err = kstrtoul(buf, 10, &val);
1213 	if (err)
1214 		return err;
1215 
1216 	mutex_lock(&data->update_lock);
1217 
1218 	switch (val) {
1219 	case 1:		/* PII/Celeron diode */
1220 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1221 		w83627hf_write_value(data, W83781D_REG_SCFG1,
1222 				    tmp | BIT_SCFG1[nr]);
1223 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
1224 		w83627hf_write_value(data, W83781D_REG_SCFG2,
1225 				    tmp | BIT_SCFG2[nr]);
1226 		data->sens[nr] = val;
1227 		break;
1228 	case 2:		/* 3904 */
1229 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1230 		w83627hf_write_value(data, W83781D_REG_SCFG1,
1231 				    tmp | BIT_SCFG1[nr]);
1232 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
1233 		w83627hf_write_value(data, W83781D_REG_SCFG2,
1234 				    tmp & ~BIT_SCFG2[nr]);
1235 		data->sens[nr] = val;
1236 		break;
1237 	case W83781D_DEFAULT_BETA:
1238 		dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
1239 			 "instead\n", W83781D_DEFAULT_BETA);
1240 		/* fall through */
1241 	case 4:		/* thermistor */
1242 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1243 		w83627hf_write_value(data, W83781D_REG_SCFG1,
1244 				    tmp & ~BIT_SCFG1[nr]);
1245 		data->sens[nr] = val;
1246 		break;
1247 	default:
1248 		dev_err(dev,
1249 		       "Invalid sensor type %ld; must be 1, 2, or 4\n",
1250 		       (long) val);
1251 		break;
1252 	}
1253 
1254 	mutex_unlock(&data->update_lock);
1255 	return count;
1256 }
1257 
1258 #define sysfs_temp_type(offset) \
1259 static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
1260 			  show_temp_type, store_temp_type, offset - 1);
1261 
1262 sysfs_temp_type(1);
1263 sysfs_temp_type(2);
1264 sysfs_temp_type(3);
1265 
1266 static ssize_t
1267 show_name(struct device *dev, struct device_attribute *devattr, char *buf)
1268 {
1269 	struct w83627hf_data *data = dev_get_drvdata(dev);
1270 
1271 	return sprintf(buf, "%s\n", data->name);
1272 }
1273 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
1274 
1275 static int __init w83627hf_find(int sioaddr, unsigned short *addr,
1276 				struct w83627hf_sio_data *sio_data)
1277 {
1278 	int err = -ENODEV;
1279 	u16 val;
1280 
1281 	static __initconst char *const names[] = {
1282 		"W83627HF",
1283 		"W83627THF",
1284 		"W83697HF",
1285 		"W83637HF",
1286 		"W83687THF",
1287 	};
1288 
1289 	sio_data->sioaddr = sioaddr;
1290 	superio_enter(sio_data);
1291 	val = force_id ? force_id : superio_inb(sio_data, DEVID);
1292 	switch (val) {
1293 	case W627_DEVID:
1294 		sio_data->type = w83627hf;
1295 		break;
1296 	case W627THF_DEVID:
1297 		sio_data->type = w83627thf;
1298 		break;
1299 	case W697_DEVID:
1300 		sio_data->type = w83697hf;
1301 		break;
1302 	case W637_DEVID:
1303 		sio_data->type = w83637hf;
1304 		break;
1305 	case W687THF_DEVID:
1306 		sio_data->type = w83687thf;
1307 		break;
1308 	case 0xff:	/* No device at all */
1309 		goto exit;
1310 	default:
1311 		pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%02x)\n", val);
1312 		goto exit;
1313 	}
1314 
1315 	superio_select(sio_data, W83627HF_LD_HWM);
1316 	val = (superio_inb(sio_data, WINB_BASE_REG) << 8) |
1317 	       superio_inb(sio_data, WINB_BASE_REG + 1);
1318 	*addr = val & WINB_ALIGNMENT;
1319 	if (*addr == 0) {
1320 		pr_warn("Base address not set, skipping\n");
1321 		goto exit;
1322 	}
1323 
1324 	val = superio_inb(sio_data, WINB_ACT_REG);
1325 	if (!(val & 0x01)) {
1326 		pr_warn("Enabling HWM logical device\n");
1327 		superio_outb(sio_data, WINB_ACT_REG, val | 0x01);
1328 	}
1329 
1330 	err = 0;
1331 	pr_info(DRVNAME ": Found %s chip at %#x\n",
1332 		names[sio_data->type], *addr);
1333 
1334  exit:
1335 	superio_exit(sio_data);
1336 	return err;
1337 }
1338 
1339 #define VIN_UNIT_ATTRS(_X_)	\
1340 	&sensor_dev_attr_in##_X_##_input.dev_attr.attr,		\
1341 	&sensor_dev_attr_in##_X_##_min.dev_attr.attr,		\
1342 	&sensor_dev_attr_in##_X_##_max.dev_attr.attr,		\
1343 	&sensor_dev_attr_in##_X_##_alarm.dev_attr.attr,		\
1344 	&sensor_dev_attr_in##_X_##_beep.dev_attr.attr
1345 
1346 #define FAN_UNIT_ATTRS(_X_)	\
1347 	&sensor_dev_attr_fan##_X_##_input.dev_attr.attr,	\
1348 	&sensor_dev_attr_fan##_X_##_min.dev_attr.attr,		\
1349 	&sensor_dev_attr_fan##_X_##_div.dev_attr.attr,		\
1350 	&sensor_dev_attr_fan##_X_##_alarm.dev_attr.attr,	\
1351 	&sensor_dev_attr_fan##_X_##_beep.dev_attr.attr
1352 
1353 #define TEMP_UNIT_ATTRS(_X_)	\
1354 	&sensor_dev_attr_temp##_X_##_input.dev_attr.attr,	\
1355 	&sensor_dev_attr_temp##_X_##_max.dev_attr.attr,		\
1356 	&sensor_dev_attr_temp##_X_##_max_hyst.dev_attr.attr,	\
1357 	&sensor_dev_attr_temp##_X_##_type.dev_attr.attr,	\
1358 	&sensor_dev_attr_temp##_X_##_alarm.dev_attr.attr,	\
1359 	&sensor_dev_attr_temp##_X_##_beep.dev_attr.attr
1360 
1361 static struct attribute *w83627hf_attributes[] = {
1362 	&dev_attr_in0_input.attr,
1363 	&dev_attr_in0_min.attr,
1364 	&dev_attr_in0_max.attr,
1365 	&sensor_dev_attr_in0_alarm.dev_attr.attr,
1366 	&sensor_dev_attr_in0_beep.dev_attr.attr,
1367 	VIN_UNIT_ATTRS(2),
1368 	VIN_UNIT_ATTRS(3),
1369 	VIN_UNIT_ATTRS(4),
1370 	VIN_UNIT_ATTRS(7),
1371 	VIN_UNIT_ATTRS(8),
1372 
1373 	FAN_UNIT_ATTRS(1),
1374 	FAN_UNIT_ATTRS(2),
1375 
1376 	TEMP_UNIT_ATTRS(1),
1377 	TEMP_UNIT_ATTRS(2),
1378 
1379 	&dev_attr_alarms.attr,
1380 	&sensor_dev_attr_beep_enable.dev_attr.attr,
1381 	&dev_attr_beep_mask.attr,
1382 
1383 	&sensor_dev_attr_pwm1.dev_attr.attr,
1384 	&sensor_dev_attr_pwm2.dev_attr.attr,
1385 	&dev_attr_name.attr,
1386 	NULL
1387 };
1388 
1389 static const struct attribute_group w83627hf_group = {
1390 	.attrs = w83627hf_attributes,
1391 };
1392 
1393 static struct attribute *w83627hf_attributes_opt[] = {
1394 	VIN_UNIT_ATTRS(1),
1395 	VIN_UNIT_ATTRS(5),
1396 	VIN_UNIT_ATTRS(6),
1397 
1398 	FAN_UNIT_ATTRS(3),
1399 	TEMP_UNIT_ATTRS(3),
1400 	&sensor_dev_attr_pwm3.dev_attr.attr,
1401 
1402 	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
1403 	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
1404 	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
1405 
1406 	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
1407 	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
1408 	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
1409 
1410 	NULL
1411 };
1412 
1413 static const struct attribute_group w83627hf_group_opt = {
1414 	.attrs = w83627hf_attributes_opt,
1415 };
1416 
1417 static int w83627hf_probe(struct platform_device *pdev)
1418 {
1419 	struct device *dev = &pdev->dev;
1420 	struct w83627hf_sio_data *sio_data = dev_get_platdata(dev);
1421 	struct w83627hf_data *data;
1422 	struct resource *res;
1423 	int err, i;
1424 
1425 	static const char *names[] = {
1426 		"w83627hf",
1427 		"w83627thf",
1428 		"w83697hf",
1429 		"w83637hf",
1430 		"w83687thf",
1431 	};
1432 
1433 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1434 	if (!devm_request_region(dev, res->start, WINB_REGION_SIZE, DRVNAME)) {
1435 		dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
1436 			(unsigned long)res->start,
1437 			(unsigned long)(res->start + WINB_REGION_SIZE - 1));
1438 		return -EBUSY;
1439 	}
1440 
1441 	data = devm_kzalloc(dev, sizeof(struct w83627hf_data), GFP_KERNEL);
1442 	if (!data)
1443 		return -ENOMEM;
1444 
1445 	data->addr = res->start;
1446 	data->type = sio_data->type;
1447 	data->name = names[sio_data->type];
1448 	mutex_init(&data->lock);
1449 	mutex_init(&data->update_lock);
1450 	platform_set_drvdata(pdev, data);
1451 
1452 	/* Initialize the chip */
1453 	w83627hf_init_device(pdev);
1454 
1455 	/* A few vars need to be filled upon startup */
1456 	for (i = 0; i <= 2; i++)
1457 		data->fan_min[i] = w83627hf_read_value(
1458 					data, W83627HF_REG_FAN_MIN(i));
1459 	w83627hf_update_fan_div(data);
1460 
1461 	/* Register common device attributes */
1462 	err = sysfs_create_group(&dev->kobj, &w83627hf_group);
1463 	if (err)
1464 		return err;
1465 
1466 	/* Register chip-specific device attributes */
1467 	if (data->type == w83627hf || data->type == w83697hf)
1468 		if ((err = device_create_file(dev,
1469 				&sensor_dev_attr_in5_input.dev_attr))
1470 		 || (err = device_create_file(dev,
1471 				&sensor_dev_attr_in5_min.dev_attr))
1472 		 || (err = device_create_file(dev,
1473 				&sensor_dev_attr_in5_max.dev_attr))
1474 		 || (err = device_create_file(dev,
1475 				&sensor_dev_attr_in5_alarm.dev_attr))
1476 		 || (err = device_create_file(dev,
1477 				&sensor_dev_attr_in5_beep.dev_attr))
1478 		 || (err = device_create_file(dev,
1479 				&sensor_dev_attr_in6_input.dev_attr))
1480 		 || (err = device_create_file(dev,
1481 				&sensor_dev_attr_in6_min.dev_attr))
1482 		 || (err = device_create_file(dev,
1483 				&sensor_dev_attr_in6_max.dev_attr))
1484 		 || (err = device_create_file(dev,
1485 				&sensor_dev_attr_in6_alarm.dev_attr))
1486 		 || (err = device_create_file(dev,
1487 				&sensor_dev_attr_in6_beep.dev_attr))
1488 		 || (err = device_create_file(dev,
1489 				&sensor_dev_attr_pwm1_freq.dev_attr))
1490 		 || (err = device_create_file(dev,
1491 				&sensor_dev_attr_pwm2_freq.dev_attr)))
1492 			goto error;
1493 
1494 	if (data->type != w83697hf)
1495 		if ((err = device_create_file(dev,
1496 				&sensor_dev_attr_in1_input.dev_attr))
1497 		 || (err = device_create_file(dev,
1498 				&sensor_dev_attr_in1_min.dev_attr))
1499 		 || (err = device_create_file(dev,
1500 				&sensor_dev_attr_in1_max.dev_attr))
1501 		 || (err = device_create_file(dev,
1502 				&sensor_dev_attr_in1_alarm.dev_attr))
1503 		 || (err = device_create_file(dev,
1504 				&sensor_dev_attr_in1_beep.dev_attr))
1505 		 || (err = device_create_file(dev,
1506 				&sensor_dev_attr_fan3_input.dev_attr))
1507 		 || (err = device_create_file(dev,
1508 				&sensor_dev_attr_fan3_min.dev_attr))
1509 		 || (err = device_create_file(dev,
1510 				&sensor_dev_attr_fan3_div.dev_attr))
1511 		 || (err = device_create_file(dev,
1512 				&sensor_dev_attr_fan3_alarm.dev_attr))
1513 		 || (err = device_create_file(dev,
1514 				&sensor_dev_attr_fan3_beep.dev_attr))
1515 		 || (err = device_create_file(dev,
1516 				&sensor_dev_attr_temp3_input.dev_attr))
1517 		 || (err = device_create_file(dev,
1518 				&sensor_dev_attr_temp3_max.dev_attr))
1519 		 || (err = device_create_file(dev,
1520 				&sensor_dev_attr_temp3_max_hyst.dev_attr))
1521 		 || (err = device_create_file(dev,
1522 				&sensor_dev_attr_temp3_alarm.dev_attr))
1523 		 || (err = device_create_file(dev,
1524 				&sensor_dev_attr_temp3_beep.dev_attr))
1525 		 || (err = device_create_file(dev,
1526 				&sensor_dev_attr_temp3_type.dev_attr)))
1527 			goto error;
1528 
1529 	if (data->type != w83697hf && data->vid != 0xff) {
1530 		/* Convert VID to voltage based on VRM */
1531 		data->vrm = vid_which_vrm();
1532 
1533 		if ((err = device_create_file(dev, &dev_attr_cpu0_vid))
1534 		 || (err = device_create_file(dev, &dev_attr_vrm)))
1535 			goto error;
1536 	}
1537 
1538 	if (data->type == w83627thf || data->type == w83637hf
1539 	    || data->type == w83687thf) {
1540 		err = device_create_file(dev, &sensor_dev_attr_pwm3.dev_attr);
1541 		if (err)
1542 			goto error;
1543 	}
1544 
1545 	if (data->type == w83637hf || data->type == w83687thf)
1546 		if ((err = device_create_file(dev,
1547 				&sensor_dev_attr_pwm1_freq.dev_attr))
1548 		 || (err = device_create_file(dev,
1549 				&sensor_dev_attr_pwm2_freq.dev_attr))
1550 		 || (err = device_create_file(dev,
1551 				&sensor_dev_attr_pwm3_freq.dev_attr)))
1552 			goto error;
1553 
1554 	if (data->type != w83627hf)
1555 		if ((err = device_create_file(dev,
1556 				&sensor_dev_attr_pwm1_enable.dev_attr))
1557 		 || (err = device_create_file(dev,
1558 				&sensor_dev_attr_pwm2_enable.dev_attr)))
1559 			goto error;
1560 
1561 	if (data->type == w83627thf || data->type == w83637hf
1562 	    || data->type == w83687thf) {
1563 		err = device_create_file(dev,
1564 					 &sensor_dev_attr_pwm3_enable.dev_attr);
1565 		if (err)
1566 			goto error;
1567 	}
1568 
1569 	data->hwmon_dev = hwmon_device_register(dev);
1570 	if (IS_ERR(data->hwmon_dev)) {
1571 		err = PTR_ERR(data->hwmon_dev);
1572 		goto error;
1573 	}
1574 
1575 	return 0;
1576 
1577  error:
1578 	sysfs_remove_group(&dev->kobj, &w83627hf_group);
1579 	sysfs_remove_group(&dev->kobj, &w83627hf_group_opt);
1580 	return err;
1581 }
1582 
1583 static int w83627hf_remove(struct platform_device *pdev)
1584 {
1585 	struct w83627hf_data *data = platform_get_drvdata(pdev);
1586 
1587 	hwmon_device_unregister(data->hwmon_dev);
1588 
1589 	sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group);
1590 	sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt);
1591 
1592 	return 0;
1593 }
1594 
1595 
1596 /* Registers 0x50-0x5f are banked */
1597 static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg)
1598 {
1599 	if ((reg & 0x00f0) == 0x50) {
1600 		outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
1601 		outb_p(reg >> 8, data->addr + W83781D_DATA_REG_OFFSET);
1602 	}
1603 }
1604 
1605 /* Not strictly necessary, but play it safe for now */
1606 static inline void w83627hf_reset_bank(struct w83627hf_data *data, u16 reg)
1607 {
1608 	if (reg & 0xff00) {
1609 		outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
1610 		outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
1611 	}
1612 }
1613 
1614 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
1615 {
1616 	int res, word_sized;
1617 
1618 	mutex_lock(&data->lock);
1619 	word_sized = (((reg & 0xff00) == 0x100)
1620 		   || ((reg & 0xff00) == 0x200))
1621 		  && (((reg & 0x00ff) == 0x50)
1622 		   || ((reg & 0x00ff) == 0x53)
1623 		   || ((reg & 0x00ff) == 0x55));
1624 	w83627hf_set_bank(data, reg);
1625 	outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1626 	res = inb_p(data->addr + W83781D_DATA_REG_OFFSET);
1627 	if (word_sized) {
1628 		outb_p((reg & 0xff) + 1,
1629 		       data->addr + W83781D_ADDR_REG_OFFSET);
1630 		res =
1631 		    (res << 8) + inb_p(data->addr +
1632 				       W83781D_DATA_REG_OFFSET);
1633 	}
1634 	w83627hf_reset_bank(data, reg);
1635 	mutex_unlock(&data->lock);
1636 	return res;
1637 }
1638 
1639 static int w83627thf_read_gpio5(struct platform_device *pdev)
1640 {
1641 	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
1642 	int res = 0xff, sel;
1643 
1644 	superio_enter(sio_data);
1645 	superio_select(sio_data, W83627HF_LD_GPIO5);
1646 
1647 	/* Make sure these GPIO pins are enabled */
1648 	if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) {
1649 		dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
1650 		goto exit;
1651 	}
1652 
1653 	/*
1654 	 * Make sure the pins are configured for input
1655 	 * There must be at least five (VRM 9), and possibly 6 (VRM 10)
1656 	 */
1657 	sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f;
1658 	if ((sel & 0x1f) != 0x1f) {
1659 		dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
1660 			"function\n");
1661 		goto exit;
1662 	}
1663 
1664 	dev_info(&pdev->dev, "Reading VID from GPIO5\n");
1665 	res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel;
1666 
1667 exit:
1668 	superio_exit(sio_data);
1669 	return res;
1670 }
1671 
1672 static int w83687thf_read_vid(struct platform_device *pdev)
1673 {
1674 	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
1675 	int res = 0xff;
1676 
1677 	superio_enter(sio_data);
1678 	superio_select(sio_data, W83627HF_LD_HWM);
1679 
1680 	/* Make sure these GPIO pins are enabled */
1681 	if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) {
1682 		dev_dbg(&pdev->dev, "VID disabled, no VID function\n");
1683 		goto exit;
1684 	}
1685 
1686 	/* Make sure the pins are configured for input */
1687 	if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) {
1688 		dev_dbg(&pdev->dev, "VID configured as output, "
1689 			"no VID function\n");
1690 		goto exit;
1691 	}
1692 
1693 	res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f;
1694 
1695 exit:
1696 	superio_exit(sio_data);
1697 	return res;
1698 }
1699 
1700 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value)
1701 {
1702 	int word_sized;
1703 
1704 	mutex_lock(&data->lock);
1705 	word_sized = (((reg & 0xff00) == 0x100)
1706 		   || ((reg & 0xff00) == 0x200))
1707 		  && (((reg & 0x00ff) == 0x53)
1708 		   || ((reg & 0x00ff) == 0x55));
1709 	w83627hf_set_bank(data, reg);
1710 	outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1711 	if (word_sized) {
1712 		outb_p(value >> 8,
1713 		       data->addr + W83781D_DATA_REG_OFFSET);
1714 		outb_p((reg & 0xff) + 1,
1715 		       data->addr + W83781D_ADDR_REG_OFFSET);
1716 	}
1717 	outb_p(value & 0xff,
1718 	       data->addr + W83781D_DATA_REG_OFFSET);
1719 	w83627hf_reset_bank(data, reg);
1720 	mutex_unlock(&data->lock);
1721 	return 0;
1722 }
1723 
1724 static void w83627hf_init_device(struct platform_device *pdev)
1725 {
1726 	struct w83627hf_data *data = platform_get_drvdata(pdev);
1727 	int i;
1728 	enum chips type = data->type;
1729 	u8 tmp;
1730 
1731 	/* Minimize conflicts with other winbond i2c-only clients...  */
1732 	/* disable i2c subclients... how to disable main i2c client?? */
1733 	/* force i2c address to relatively uncommon address */
1734 	if (type == w83627hf) {
1735 		w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89);
1736 		w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c);
1737 	}
1738 
1739 	/* Read VID only once */
1740 	if (type == w83627hf || type == w83637hf) {
1741 		int lo = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1742 		int hi = w83627hf_read_value(data, W83781D_REG_CHIPID);
1743 		data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
1744 	} else if (type == w83627thf) {
1745 		data->vid = w83627thf_read_gpio5(pdev);
1746 	} else if (type == w83687thf) {
1747 		data->vid = w83687thf_read_vid(pdev);
1748 	}
1749 
1750 	/* Read VRM & OVT Config only once */
1751 	if (type == w83627thf || type == w83637hf || type == w83687thf) {
1752 		data->vrm_ovt =
1753 			w83627hf_read_value(data, W83627THF_REG_VRM_OVT_CFG);
1754 	}
1755 
1756 	tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1757 	for (i = 1; i <= 3; i++) {
1758 		if (!(tmp & BIT_SCFG1[i - 1])) {
1759 			data->sens[i - 1] = 4;
1760 		} else {
1761 			if (w83627hf_read_value
1762 			    (data,
1763 			     W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1764 				data->sens[i - 1] = 1;
1765 			else
1766 				data->sens[i - 1] = 2;
1767 		}
1768 		if ((type == w83697hf) && (i == 2))
1769 			break;
1770 	}
1771 
1772 	if(init) {
1773 		/* Enable temp2 */
1774 		tmp = w83627hf_read_value(data, W83627HF_REG_TEMP2_CONFIG);
1775 		if (tmp & 0x01) {
1776 			dev_warn(&pdev->dev, "Enabling temp2, readings "
1777 				 "might not make sense\n");
1778 			w83627hf_write_value(data, W83627HF_REG_TEMP2_CONFIG,
1779 				tmp & 0xfe);
1780 		}
1781 
1782 		/* Enable temp3 */
1783 		if (type != w83697hf) {
1784 			tmp = w83627hf_read_value(data,
1785 				W83627HF_REG_TEMP3_CONFIG);
1786 			if (tmp & 0x01) {
1787 				dev_warn(&pdev->dev, "Enabling temp3, "
1788 					 "readings might not make sense\n");
1789 				w83627hf_write_value(data,
1790 					W83627HF_REG_TEMP3_CONFIG, tmp & 0xfe);
1791 			}
1792 		}
1793 	}
1794 
1795 	/* Start monitoring */
1796 	w83627hf_write_value(data, W83781D_REG_CONFIG,
1797 			    (w83627hf_read_value(data,
1798 						W83781D_REG_CONFIG) & 0xf7)
1799 			    | 0x01);
1800 
1801 	/* Enable VBAT monitoring if needed */
1802 	tmp = w83627hf_read_value(data, W83781D_REG_VBAT);
1803 	if (!(tmp & 0x01))
1804 		w83627hf_write_value(data, W83781D_REG_VBAT, tmp | 0x01);
1805 }
1806 
1807 static void w83627hf_update_fan_div(struct w83627hf_data *data)
1808 {
1809 	int reg;
1810 
1811 	reg = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1812 	data->fan_div[0] = (reg >> 4) & 0x03;
1813 	data->fan_div[1] = (reg >> 6) & 0x03;
1814 	if (data->type != w83697hf) {
1815 		data->fan_div[2] = (w83627hf_read_value(data,
1816 				       W83781D_REG_PIN) >> 6) & 0x03;
1817 	}
1818 	reg = w83627hf_read_value(data, W83781D_REG_VBAT);
1819 	data->fan_div[0] |= (reg >> 3) & 0x04;
1820 	data->fan_div[1] |= (reg >> 4) & 0x04;
1821 	if (data->type != w83697hf)
1822 		data->fan_div[2] |= (reg >> 5) & 0x04;
1823 }
1824 
1825 static struct w83627hf_data *w83627hf_update_device(struct device *dev)
1826 {
1827 	struct w83627hf_data *data = dev_get_drvdata(dev);
1828 	int i, num_temps = (data->type == w83697hf) ? 2 : 3;
1829 	int num_pwms = (data->type == w83697hf) ? 2 : 3;
1830 
1831 	mutex_lock(&data->update_lock);
1832 
1833 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1834 	    || !data->valid) {
1835 		for (i = 0; i <= 8; i++) {
1836 			/* skip missing sensors */
1837 			if (((data->type == w83697hf) && (i == 1)) ||
1838 			    ((data->type != w83627hf && data->type != w83697hf)
1839 			    && (i == 5 || i == 6)))
1840 				continue;
1841 			data->in[i] =
1842 			    w83627hf_read_value(data, W83781D_REG_IN(i));
1843 			data->in_min[i] =
1844 			    w83627hf_read_value(data,
1845 					       W83781D_REG_IN_MIN(i));
1846 			data->in_max[i] =
1847 			    w83627hf_read_value(data,
1848 					       W83781D_REG_IN_MAX(i));
1849 		}
1850 		for (i = 0; i <= 2; i++) {
1851 			data->fan[i] =
1852 			    w83627hf_read_value(data, W83627HF_REG_FAN(i));
1853 			data->fan_min[i] =
1854 			    w83627hf_read_value(data,
1855 					       W83627HF_REG_FAN_MIN(i));
1856 		}
1857 		for (i = 0; i <= 2; i++) {
1858 			u8 tmp = w83627hf_read_value(data,
1859 				W836X7HF_REG_PWM(data->type, i));
1860  			/* bits 0-3 are reserved  in 627THF */
1861  			if (data->type == w83627thf)
1862 				tmp &= 0xf0;
1863 			data->pwm[i] = tmp;
1864 			if (i == 1 &&
1865 			    (data->type == w83627hf || data->type == w83697hf))
1866 				break;
1867 		}
1868 		if (data->type == w83627hf) {
1869 				u8 tmp = w83627hf_read_value(data,
1870 						W83627HF_REG_PWM_FREQ);
1871 				data->pwm_freq[0] = tmp & 0x07;
1872 				data->pwm_freq[1] = (tmp >> 4) & 0x07;
1873 		} else if (data->type != w83627thf) {
1874 			for (i = 1; i <= 3; i++) {
1875 				data->pwm_freq[i - 1] =
1876 					w83627hf_read_value(data,
1877 						W83637HF_REG_PWM_FREQ[i - 1]);
1878 				if (i == 2 && (data->type == w83697hf))
1879 					break;
1880 			}
1881 		}
1882 		if (data->type != w83627hf) {
1883 			for (i = 0; i < num_pwms; i++) {
1884 				u8 tmp = w83627hf_read_value(data,
1885 					W83627THF_REG_PWM_ENABLE[i]);
1886 				data->pwm_enable[i] =
1887 					((tmp >> W83627THF_PWM_ENABLE_SHIFT[i])
1888 					& 0x03) + 1;
1889 			}
1890 		}
1891 		for (i = 0; i < num_temps; i++) {
1892 			data->temp[i] = w83627hf_read_value(
1893 						data, w83627hf_reg_temp[i]);
1894 			data->temp_max[i] = w83627hf_read_value(
1895 						data, w83627hf_reg_temp_over[i]);
1896 			data->temp_max_hyst[i] = w83627hf_read_value(
1897 						data, w83627hf_reg_temp_hyst[i]);
1898 		}
1899 
1900 		w83627hf_update_fan_div(data);
1901 
1902 		data->alarms =
1903 		    w83627hf_read_value(data, W83781D_REG_ALARM1) |
1904 		    (w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) |
1905 		    (w83627hf_read_value(data, W83781D_REG_ALARM3) << 16);
1906 		i = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
1907 		data->beep_mask = (i << 8) |
1908 		    w83627hf_read_value(data, W83781D_REG_BEEP_INTS1) |
1909 		    w83627hf_read_value(data, W83781D_REG_BEEP_INTS3) << 16;
1910 		data->last_updated = jiffies;
1911 		data->valid = 1;
1912 	}
1913 
1914 	mutex_unlock(&data->update_lock);
1915 
1916 	return data;
1917 }
1918 
1919 static int __init w83627hf_device_add(unsigned short address,
1920 				      const struct w83627hf_sio_data *sio_data)
1921 {
1922 	struct resource res = {
1923 		.start	= address + WINB_REGION_OFFSET,
1924 		.end	= address + WINB_REGION_OFFSET + WINB_REGION_SIZE - 1,
1925 		.name	= DRVNAME,
1926 		.flags	= IORESOURCE_IO,
1927 	};
1928 	int err;
1929 
1930 	err = acpi_check_resource_conflict(&res);
1931 	if (err)
1932 		goto exit;
1933 
1934 	pdev = platform_device_alloc(DRVNAME, address);
1935 	if (!pdev) {
1936 		err = -ENOMEM;
1937 		pr_err("Device allocation failed\n");
1938 		goto exit;
1939 	}
1940 
1941 	err = platform_device_add_resources(pdev, &res, 1);
1942 	if (err) {
1943 		pr_err("Device resource addition failed (%d)\n", err);
1944 		goto exit_device_put;
1945 	}
1946 
1947 	err = platform_device_add_data(pdev, sio_data,
1948 				       sizeof(struct w83627hf_sio_data));
1949 	if (err) {
1950 		pr_err("Platform data allocation failed\n");
1951 		goto exit_device_put;
1952 	}
1953 
1954 	err = platform_device_add(pdev);
1955 	if (err) {
1956 		pr_err("Device addition failed (%d)\n", err);
1957 		goto exit_device_put;
1958 	}
1959 
1960 	return 0;
1961 
1962 exit_device_put:
1963 	platform_device_put(pdev);
1964 exit:
1965 	return err;
1966 }
1967 
1968 static int __init sensors_w83627hf_init(void)
1969 {
1970 	int err;
1971 	unsigned short address;
1972 	struct w83627hf_sio_data sio_data;
1973 
1974 	if (w83627hf_find(0x2e, &address, &sio_data)
1975 	 && w83627hf_find(0x4e, &address, &sio_data))
1976 		return -ENODEV;
1977 
1978 	err = platform_driver_register(&w83627hf_driver);
1979 	if (err)
1980 		goto exit;
1981 
1982 	/* Sets global pdev as a side effect */
1983 	err = w83627hf_device_add(address, &sio_data);
1984 	if (err)
1985 		goto exit_driver;
1986 
1987 	return 0;
1988 
1989 exit_driver:
1990 	platform_driver_unregister(&w83627hf_driver);
1991 exit:
1992 	return err;
1993 }
1994 
1995 static void __exit sensors_w83627hf_exit(void)
1996 {
1997 	platform_device_unregister(pdev);
1998 	platform_driver_unregister(&w83627hf_driver);
1999 }
2000 
2001 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
2002 	      "Philip Edelbrock <phil@netroedge.com>, "
2003 	      "and Mark Studebaker <mdsxyz123@yahoo.com>");
2004 MODULE_DESCRIPTION("W83627HF driver");
2005 MODULE_LICENSE("GPL");
2006 
2007 module_init(sensors_w83627hf_init);
2008 module_exit(sensors_w83627hf_exit);
2009