1 /* 2 w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware 3 monitoring 4 Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>, 5 Philip Edelbrock <phil@netroedge.com>, 6 and Mark Studebaker <mdsxyz123@yahoo.com> 7 Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org> 8 Copyright (c) 2007 Jean Delvare <khali@linux-fr.org> 9 10 This program is free software; you can redistribute it and/or modify 11 it under the terms of the GNU General Public License as published by 12 the Free Software Foundation; either version 2 of the License, or 13 (at your option) any later version. 14 15 This program is distributed in the hope that it will be useful, 16 but WITHOUT ANY WARRANTY; without even the implied warranty of 17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 GNU General Public License for more details. 19 20 You should have received a copy of the GNU General Public License 21 along with this program; if not, write to the Free Software 22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 23 */ 24 25 /* 26 Supports following chips: 27 28 Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA 29 w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC) 30 w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) 31 w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC) 32 w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) 33 w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) 34 35 For other winbond chips, and for i2c support in the above chips, 36 use w83781d.c. 37 38 Note: automatic ("cruise") fan control for 697, 637 & 627thf not 39 supported yet. 40 */ 41 42 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 43 44 #include <linux/module.h> 45 #include <linux/init.h> 46 #include <linux/slab.h> 47 #include <linux/jiffies.h> 48 #include <linux/platform_device.h> 49 #include <linux/hwmon.h> 50 #include <linux/hwmon-sysfs.h> 51 #include <linux/hwmon-vid.h> 52 #include <linux/err.h> 53 #include <linux/mutex.h> 54 #include <linux/ioport.h> 55 #include <linux/acpi.h> 56 #include <linux/io.h> 57 #include "lm75.h" 58 59 static struct platform_device *pdev; 60 61 #define DRVNAME "w83627hf" 62 enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf }; 63 64 struct w83627hf_sio_data { 65 enum chips type; 66 int sioaddr; 67 }; 68 69 static u8 force_i2c = 0x1f; 70 module_param(force_i2c, byte, 0); 71 MODULE_PARM_DESC(force_i2c, 72 "Initialize the i2c address of the sensors"); 73 74 static int init = 1; 75 module_param(init, bool, 0); 76 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); 77 78 static unsigned short force_id; 79 module_param(force_id, ushort, 0); 80 MODULE_PARM_DESC(force_id, "Override the detected device ID"); 81 82 /* modified from kernel/include/traps.c */ 83 #define DEV 0x07 /* Register: Logical device select */ 84 85 /* logical device numbers for superio_select (below) */ 86 #define W83627HF_LD_FDC 0x00 87 #define W83627HF_LD_PRT 0x01 88 #define W83627HF_LD_UART1 0x02 89 #define W83627HF_LD_UART2 0x03 90 #define W83627HF_LD_KBC 0x05 91 #define W83627HF_LD_CIR 0x06 /* w83627hf only */ 92 #define W83627HF_LD_GAME 0x07 93 #define W83627HF_LD_MIDI 0x07 94 #define W83627HF_LD_GPIO1 0x07 95 #define W83627HF_LD_GPIO5 0x07 /* w83627thf only */ 96 #define W83627HF_LD_GPIO2 0x08 97 #define W83627HF_LD_GPIO3 0x09 98 #define W83627HF_LD_GPIO4 0x09 /* w83627thf only */ 99 #define W83627HF_LD_ACPI 0x0a 100 #define W83627HF_LD_HWM 0x0b 101 102 #define DEVID 0x20 /* Register: Device ID */ 103 104 #define W83627THF_GPIO5_EN 0x30 /* w83627thf only */ 105 #define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */ 106 #define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */ 107 108 #define W83687THF_VID_EN 0x29 /* w83687thf only */ 109 #define W83687THF_VID_CFG 0xF0 /* w83687thf only */ 110 #define W83687THF_VID_DATA 0xF1 /* w83687thf only */ 111 112 static inline void 113 superio_outb(struct w83627hf_sio_data *sio, int reg, int val) 114 { 115 outb(reg, sio->sioaddr); 116 outb(val, sio->sioaddr + 1); 117 } 118 119 static inline int 120 superio_inb(struct w83627hf_sio_data *sio, int reg) 121 { 122 outb(reg, sio->sioaddr); 123 return inb(sio->sioaddr + 1); 124 } 125 126 static inline void 127 superio_select(struct w83627hf_sio_data *sio, int ld) 128 { 129 outb(DEV, sio->sioaddr); 130 outb(ld, sio->sioaddr + 1); 131 } 132 133 static inline void 134 superio_enter(struct w83627hf_sio_data *sio) 135 { 136 outb(0x87, sio->sioaddr); 137 outb(0x87, sio->sioaddr); 138 } 139 140 static inline void 141 superio_exit(struct w83627hf_sio_data *sio) 142 { 143 outb(0xAA, sio->sioaddr); 144 } 145 146 #define W627_DEVID 0x52 147 #define W627THF_DEVID 0x82 148 #define W697_DEVID 0x60 149 #define W637_DEVID 0x70 150 #define W687THF_DEVID 0x85 151 #define WINB_ACT_REG 0x30 152 #define WINB_BASE_REG 0x60 153 /* Constants specified below */ 154 155 /* Alignment of the base address */ 156 #define WINB_ALIGNMENT ~7 157 158 /* Offset & size of I/O region we are interested in */ 159 #define WINB_REGION_OFFSET 5 160 #define WINB_REGION_SIZE 2 161 162 /* Where are the sensors address/data registers relative to the region offset */ 163 #define W83781D_ADDR_REG_OFFSET 0 164 #define W83781D_DATA_REG_OFFSET 1 165 166 /* The W83781D registers */ 167 /* The W83782D registers for nr=7,8 are in bank 5 */ 168 #define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ 169 (0x554 + (((nr) - 7) * 2))) 170 #define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ 171 (0x555 + (((nr) - 7) * 2))) 172 #define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ 173 (0x550 + (nr) - 7)) 174 175 /* nr:0-2 for fans:1-3 */ 176 #define W83627HF_REG_FAN_MIN(nr) (0x3b + (nr)) 177 #define W83627HF_REG_FAN(nr) (0x28 + (nr)) 178 179 #define W83627HF_REG_TEMP2_CONFIG 0x152 180 #define W83627HF_REG_TEMP3_CONFIG 0x252 181 /* these are zero-based, unlike config constants above */ 182 static const u16 w83627hf_reg_temp[] = { 0x27, 0x150, 0x250 }; 183 static const u16 w83627hf_reg_temp_hyst[] = { 0x3A, 0x153, 0x253 }; 184 static const u16 w83627hf_reg_temp_over[] = { 0x39, 0x155, 0x255 }; 185 186 #define W83781D_REG_BANK 0x4E 187 188 #define W83781D_REG_CONFIG 0x40 189 #define W83781D_REG_ALARM1 0x459 190 #define W83781D_REG_ALARM2 0x45A 191 #define W83781D_REG_ALARM3 0x45B 192 193 #define W83781D_REG_BEEP_CONFIG 0x4D 194 #define W83781D_REG_BEEP_INTS1 0x56 195 #define W83781D_REG_BEEP_INTS2 0x57 196 #define W83781D_REG_BEEP_INTS3 0x453 197 198 #define W83781D_REG_VID_FANDIV 0x47 199 200 #define W83781D_REG_CHIPID 0x49 201 #define W83781D_REG_WCHIPID 0x58 202 #define W83781D_REG_CHIPMAN 0x4F 203 #define W83781D_REG_PIN 0x4B 204 205 #define W83781D_REG_VBAT 0x5D 206 207 #define W83627HF_REG_PWM1 0x5A 208 #define W83627HF_REG_PWM2 0x5B 209 210 static const u8 W83627THF_REG_PWM_ENABLE[] = { 211 0x04, /* FAN 1 mode */ 212 0x04, /* FAN 2 mode */ 213 0x12, /* FAN AUX mode */ 214 }; 215 static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 }; 216 217 #define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */ 218 #define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */ 219 #define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */ 220 221 #define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF/687THF too */ 222 223 static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 }; 224 static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2, 225 W83627THF_REG_PWM3 }; 226 #define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \ 227 regpwm_627hf[nr] : regpwm[nr]) 228 229 #define W83627HF_REG_PWM_FREQ 0x5C /* Only for the 627HF */ 230 231 #define W83637HF_REG_PWM_FREQ1 0x00 /* 697HF/687THF too */ 232 #define W83637HF_REG_PWM_FREQ2 0x02 /* 697HF/687THF too */ 233 #define W83637HF_REG_PWM_FREQ3 0x10 /* 687THF too */ 234 235 static const u8 W83637HF_REG_PWM_FREQ[] = { W83637HF_REG_PWM_FREQ1, 236 W83637HF_REG_PWM_FREQ2, 237 W83637HF_REG_PWM_FREQ3 }; 238 239 #define W83627HF_BASE_PWM_FREQ 46870 240 241 #define W83781D_REG_I2C_ADDR 0x48 242 #define W83781D_REG_I2C_SUBADDR 0x4A 243 244 /* Sensor selection */ 245 #define W83781D_REG_SCFG1 0x5D 246 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 }; 247 #define W83781D_REG_SCFG2 0x59 248 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 }; 249 #define W83781D_DEFAULT_BETA 3435 250 251 /* Conversions. Limit checking is only done on the TO_REG 252 variants. Note that you should be a bit careful with which arguments 253 these macros are called: arguments may be evaluated more than once. 254 Fixing this is just not worth it. */ 255 #define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255)) 256 #define IN_FROM_REG(val) ((val) * 16) 257 258 static inline u8 FAN_TO_REG(long rpm, int div) 259 { 260 if (rpm == 0) 261 return 255; 262 rpm = SENSORS_LIMIT(rpm, 1, 1000000); 263 return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 264 254); 265 } 266 267 #define TEMP_MIN (-128000) 268 #define TEMP_MAX ( 127000) 269 270 /* TEMP: 0.001C/bit (-128C to +127C) 271 REG: 1C/bit, two's complement */ 272 static u8 TEMP_TO_REG(long temp) 273 { 274 int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX); 275 ntemp += (ntemp<0 ? -500 : 500); 276 return (u8)(ntemp / 1000); 277 } 278 279 static int TEMP_FROM_REG(u8 reg) 280 { 281 return (s8)reg * 1000; 282 } 283 284 #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) 285 286 #define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255)) 287 288 static inline unsigned long pwm_freq_from_reg_627hf(u8 reg) 289 { 290 unsigned long freq; 291 freq = W83627HF_BASE_PWM_FREQ >> reg; 292 return freq; 293 } 294 static inline u8 pwm_freq_to_reg_627hf(unsigned long val) 295 { 296 u8 i; 297 /* Only 5 dividers (1 2 4 8 16) 298 Search for the nearest available frequency */ 299 for (i = 0; i < 4; i++) { 300 if (val > (((W83627HF_BASE_PWM_FREQ >> i) + 301 (W83627HF_BASE_PWM_FREQ >> (i+1))) / 2)) 302 break; 303 } 304 return i; 305 } 306 307 static inline unsigned long pwm_freq_from_reg(u8 reg) 308 { 309 /* Clock bit 8 -> 180 kHz or 24 MHz */ 310 unsigned long clock = (reg & 0x80) ? 180000UL : 24000000UL; 311 312 reg &= 0x7f; 313 /* This should not happen but anyway... */ 314 if (reg == 0) 315 reg++; 316 return (clock / (reg << 8)); 317 } 318 static inline u8 pwm_freq_to_reg(unsigned long val) 319 { 320 /* Minimum divider value is 0x01 and maximum is 0x7F */ 321 if (val >= 93750) /* The highest we can do */ 322 return 0x01; 323 if (val >= 720) /* Use 24 MHz clock */ 324 return (24000000UL / (val << 8)); 325 if (val < 6) /* The lowest we can do */ 326 return 0xFF; 327 else /* Use 180 kHz clock */ 328 return (0x80 | (180000UL / (val << 8))); 329 } 330 331 #define BEEP_MASK_FROM_REG(val) ((val) & 0xff7fff) 332 #define BEEP_MASK_TO_REG(val) ((val) & 0xff7fff) 333 334 #define DIV_FROM_REG(val) (1 << (val)) 335 336 static inline u8 DIV_TO_REG(long val) 337 { 338 int i; 339 val = SENSORS_LIMIT(val, 1, 128) >> 1; 340 for (i = 0; i < 7; i++) { 341 if (val == 0) 342 break; 343 val >>= 1; 344 } 345 return ((u8) i); 346 } 347 348 /* For each registered chip, we need to keep some data in memory. 349 The structure is dynamically allocated. */ 350 struct w83627hf_data { 351 unsigned short addr; 352 const char *name; 353 struct device *hwmon_dev; 354 struct mutex lock; 355 enum chips type; 356 357 struct mutex update_lock; 358 char valid; /* !=0 if following fields are valid */ 359 unsigned long last_updated; /* In jiffies */ 360 361 u8 in[9]; /* Register value */ 362 u8 in_max[9]; /* Register value */ 363 u8 in_min[9]; /* Register value */ 364 u8 fan[3]; /* Register value */ 365 u8 fan_min[3]; /* Register value */ 366 u16 temp[3]; /* Register value */ 367 u16 temp_max[3]; /* Register value */ 368 u16 temp_max_hyst[3]; /* Register value */ 369 u8 fan_div[3]; /* Register encoding, shifted right */ 370 u8 vid; /* Register encoding, combined */ 371 u32 alarms; /* Register encoding, combined */ 372 u32 beep_mask; /* Register encoding, combined */ 373 u8 pwm[3]; /* Register value */ 374 u8 pwm_enable[3]; /* 1 = manual 375 2 = thermal cruise (also called SmartFan I) 376 3 = fan speed cruise */ 377 u8 pwm_freq[3]; /* Register value */ 378 u16 sens[3]; /* 1 = pentium diode; 2 = 3904 diode; 379 4 = thermistor */ 380 u8 vrm; 381 u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */ 382 }; 383 384 385 static int w83627hf_probe(struct platform_device *pdev); 386 static int __devexit w83627hf_remove(struct platform_device *pdev); 387 388 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg); 389 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value); 390 static void w83627hf_update_fan_div(struct w83627hf_data *data); 391 static struct w83627hf_data *w83627hf_update_device(struct device *dev); 392 static void w83627hf_init_device(struct platform_device *pdev); 393 394 static struct platform_driver w83627hf_driver = { 395 .driver = { 396 .owner = THIS_MODULE, 397 .name = DRVNAME, 398 }, 399 .probe = w83627hf_probe, 400 .remove = __devexit_p(w83627hf_remove), 401 }; 402 403 static ssize_t 404 show_in_input(struct device *dev, struct device_attribute *devattr, char *buf) 405 { 406 int nr = to_sensor_dev_attr(devattr)->index; 407 struct w83627hf_data *data = w83627hf_update_device(dev); 408 return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in[nr])); 409 } 410 static ssize_t 411 show_in_min(struct device *dev, struct device_attribute *devattr, char *buf) 412 { 413 int nr = to_sensor_dev_attr(devattr)->index; 414 struct w83627hf_data *data = w83627hf_update_device(dev); 415 return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_min[nr])); 416 } 417 static ssize_t 418 show_in_max(struct device *dev, struct device_attribute *devattr, char *buf) 419 { 420 int nr = to_sensor_dev_attr(devattr)->index; 421 struct w83627hf_data *data = w83627hf_update_device(dev); 422 return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_max[nr])); 423 } 424 static ssize_t 425 store_in_min(struct device *dev, struct device_attribute *devattr, 426 const char *buf, size_t count) 427 { 428 int nr = to_sensor_dev_attr(devattr)->index; 429 struct w83627hf_data *data = dev_get_drvdata(dev); 430 long val = simple_strtol(buf, NULL, 10); 431 432 mutex_lock(&data->update_lock); 433 data->in_min[nr] = IN_TO_REG(val); 434 w83627hf_write_value(data, W83781D_REG_IN_MIN(nr), data->in_min[nr]); 435 mutex_unlock(&data->update_lock); 436 return count; 437 } 438 static ssize_t 439 store_in_max(struct device *dev, struct device_attribute *devattr, 440 const char *buf, size_t count) 441 { 442 int nr = to_sensor_dev_attr(devattr)->index; 443 struct w83627hf_data *data = dev_get_drvdata(dev); 444 long val = simple_strtol(buf, NULL, 10); 445 446 mutex_lock(&data->update_lock); 447 data->in_max[nr] = IN_TO_REG(val); 448 w83627hf_write_value(data, W83781D_REG_IN_MAX(nr), data->in_max[nr]); 449 mutex_unlock(&data->update_lock); 450 return count; 451 } 452 #define sysfs_vin_decl(offset) \ 453 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ 454 show_in_input, NULL, offset); \ 455 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO|S_IWUSR, \ 456 show_in_min, store_in_min, offset); \ 457 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO|S_IWUSR, \ 458 show_in_max, store_in_max, offset); 459 460 sysfs_vin_decl(1); 461 sysfs_vin_decl(2); 462 sysfs_vin_decl(3); 463 sysfs_vin_decl(4); 464 sysfs_vin_decl(5); 465 sysfs_vin_decl(6); 466 sysfs_vin_decl(7); 467 sysfs_vin_decl(8); 468 469 /* use a different set of functions for in0 */ 470 static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg) 471 { 472 long in0; 473 474 if ((data->vrm_ovt & 0x01) && 475 (w83627thf == data->type || w83637hf == data->type 476 || w83687thf == data->type)) 477 478 /* use VRM9 calculation */ 479 in0 = (long)((reg * 488 + 70000 + 50) / 100); 480 else 481 /* use VRM8 (standard) calculation */ 482 in0 = (long)IN_FROM_REG(reg); 483 484 return sprintf(buf,"%ld\n", in0); 485 } 486 487 static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf) 488 { 489 struct w83627hf_data *data = w83627hf_update_device(dev); 490 return show_in_0(data, buf, data->in[0]); 491 } 492 493 static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf) 494 { 495 struct w83627hf_data *data = w83627hf_update_device(dev); 496 return show_in_0(data, buf, data->in_min[0]); 497 } 498 499 static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf) 500 { 501 struct w83627hf_data *data = w83627hf_update_device(dev); 502 return show_in_0(data, buf, data->in_max[0]); 503 } 504 505 static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr, 506 const char *buf, size_t count) 507 { 508 struct w83627hf_data *data = dev_get_drvdata(dev); 509 u32 val; 510 511 val = simple_strtoul(buf, NULL, 10); 512 513 mutex_lock(&data->update_lock); 514 515 if ((data->vrm_ovt & 0x01) && 516 (w83627thf == data->type || w83637hf == data->type 517 || w83687thf == data->type)) 518 519 /* use VRM9 calculation */ 520 data->in_min[0] = 521 SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0, 522 255); 523 else 524 /* use VRM8 (standard) calculation */ 525 data->in_min[0] = IN_TO_REG(val); 526 527 w83627hf_write_value(data, W83781D_REG_IN_MIN(0), data->in_min[0]); 528 mutex_unlock(&data->update_lock); 529 return count; 530 } 531 532 static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr, 533 const char *buf, size_t count) 534 { 535 struct w83627hf_data *data = dev_get_drvdata(dev); 536 u32 val; 537 538 val = simple_strtoul(buf, NULL, 10); 539 540 mutex_lock(&data->update_lock); 541 542 if ((data->vrm_ovt & 0x01) && 543 (w83627thf == data->type || w83637hf == data->type 544 || w83687thf == data->type)) 545 546 /* use VRM9 calculation */ 547 data->in_max[0] = 548 SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0, 549 255); 550 else 551 /* use VRM8 (standard) calculation */ 552 data->in_max[0] = IN_TO_REG(val); 553 554 w83627hf_write_value(data, W83781D_REG_IN_MAX(0), data->in_max[0]); 555 mutex_unlock(&data->update_lock); 556 return count; 557 } 558 559 static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL); 560 static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, 561 show_regs_in_min0, store_regs_in_min0); 562 static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, 563 show_regs_in_max0, store_regs_in_max0); 564 565 static ssize_t 566 show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf) 567 { 568 int nr = to_sensor_dev_attr(devattr)->index; 569 struct w83627hf_data *data = w83627hf_update_device(dev); 570 return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan[nr], 571 (long)DIV_FROM_REG(data->fan_div[nr]))); 572 } 573 static ssize_t 574 show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf) 575 { 576 int nr = to_sensor_dev_attr(devattr)->index; 577 struct w83627hf_data *data = w83627hf_update_device(dev); 578 return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan_min[nr], 579 (long)DIV_FROM_REG(data->fan_div[nr]))); 580 } 581 static ssize_t 582 store_fan_min(struct device *dev, struct device_attribute *devattr, 583 const char *buf, size_t count) 584 { 585 int nr = to_sensor_dev_attr(devattr)->index; 586 struct w83627hf_data *data = dev_get_drvdata(dev); 587 u32 val = simple_strtoul(buf, NULL, 10); 588 589 mutex_lock(&data->update_lock); 590 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); 591 w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr), 592 data->fan_min[nr]); 593 594 mutex_unlock(&data->update_lock); 595 return count; 596 } 597 #define sysfs_fan_decl(offset) \ 598 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ 599 show_fan_input, NULL, offset - 1); \ 600 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ 601 show_fan_min, store_fan_min, offset - 1); 602 603 sysfs_fan_decl(1); 604 sysfs_fan_decl(2); 605 sysfs_fan_decl(3); 606 607 static ssize_t 608 show_temp(struct device *dev, struct device_attribute *devattr, char *buf) 609 { 610 int nr = to_sensor_dev_attr(devattr)->index; 611 struct w83627hf_data *data = w83627hf_update_device(dev); 612 613 u16 tmp = data->temp[nr]; 614 return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp) 615 : (long) TEMP_FROM_REG(tmp)); 616 } 617 618 static ssize_t 619 show_temp_max(struct device *dev, struct device_attribute *devattr, 620 char *buf) 621 { 622 int nr = to_sensor_dev_attr(devattr)->index; 623 struct w83627hf_data *data = w83627hf_update_device(dev); 624 625 u16 tmp = data->temp_max[nr]; 626 return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp) 627 : (long) TEMP_FROM_REG(tmp)); 628 } 629 630 static ssize_t 631 show_temp_max_hyst(struct device *dev, struct device_attribute *devattr, 632 char *buf) 633 { 634 int nr = to_sensor_dev_attr(devattr)->index; 635 struct w83627hf_data *data = w83627hf_update_device(dev); 636 637 u16 tmp = data->temp_max_hyst[nr]; 638 return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp) 639 : (long) TEMP_FROM_REG(tmp)); 640 } 641 642 static ssize_t 643 store_temp_max(struct device *dev, struct device_attribute *devattr, 644 const char *buf, size_t count) 645 { 646 int nr = to_sensor_dev_attr(devattr)->index; 647 struct w83627hf_data *data = dev_get_drvdata(dev); 648 long val = simple_strtol(buf, NULL, 10); 649 u16 tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val); 650 651 mutex_lock(&data->update_lock); 652 data->temp_max[nr] = tmp; 653 w83627hf_write_value(data, w83627hf_reg_temp_over[nr], tmp); 654 mutex_unlock(&data->update_lock); 655 return count; 656 } 657 658 static ssize_t 659 store_temp_max_hyst(struct device *dev, struct device_attribute *devattr, 660 const char *buf, size_t count) 661 { 662 int nr = to_sensor_dev_attr(devattr)->index; 663 struct w83627hf_data *data = dev_get_drvdata(dev); 664 long val = simple_strtol(buf, NULL, 10); 665 u16 tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val); 666 667 mutex_lock(&data->update_lock); 668 data->temp_max_hyst[nr] = tmp; 669 w83627hf_write_value(data, w83627hf_reg_temp_hyst[nr], tmp); 670 mutex_unlock(&data->update_lock); 671 return count; 672 } 673 674 #define sysfs_temp_decl(offset) \ 675 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ 676 show_temp, NULL, offset - 1); \ 677 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO|S_IWUSR, \ 678 show_temp_max, store_temp_max, offset - 1); \ 679 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO|S_IWUSR, \ 680 show_temp_max_hyst, store_temp_max_hyst, offset - 1); 681 682 sysfs_temp_decl(1); 683 sysfs_temp_decl(2); 684 sysfs_temp_decl(3); 685 686 static ssize_t 687 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) 688 { 689 struct w83627hf_data *data = w83627hf_update_device(dev); 690 return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); 691 } 692 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); 693 694 static ssize_t 695 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) 696 { 697 struct w83627hf_data *data = dev_get_drvdata(dev); 698 return sprintf(buf, "%ld\n", (long) data->vrm); 699 } 700 static ssize_t 701 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 702 { 703 struct w83627hf_data *data = dev_get_drvdata(dev); 704 u32 val; 705 706 val = simple_strtoul(buf, NULL, 10); 707 data->vrm = val; 708 709 return count; 710 } 711 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); 712 713 static ssize_t 714 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) 715 { 716 struct w83627hf_data *data = w83627hf_update_device(dev); 717 return sprintf(buf, "%ld\n", (long) data->alarms); 718 } 719 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); 720 721 static ssize_t 722 show_alarm(struct device *dev, struct device_attribute *attr, char *buf) 723 { 724 struct w83627hf_data *data = w83627hf_update_device(dev); 725 int bitnr = to_sensor_dev_attr(attr)->index; 726 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); 727 } 728 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); 729 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); 730 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); 731 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); 732 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); 733 static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); 734 static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10); 735 static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16); 736 static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17); 737 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); 738 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); 739 static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11); 740 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); 741 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5); 742 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13); 743 744 static ssize_t 745 show_beep_mask(struct device *dev, struct device_attribute *attr, char *buf) 746 { 747 struct w83627hf_data *data = w83627hf_update_device(dev); 748 return sprintf(buf, "%ld\n", 749 (long)BEEP_MASK_FROM_REG(data->beep_mask)); 750 } 751 752 static ssize_t 753 store_beep_mask(struct device *dev, struct device_attribute *attr, 754 const char *buf, size_t count) 755 { 756 struct w83627hf_data *data = dev_get_drvdata(dev); 757 unsigned long val; 758 759 val = simple_strtoul(buf, NULL, 10); 760 761 mutex_lock(&data->update_lock); 762 763 /* preserve beep enable */ 764 data->beep_mask = (data->beep_mask & 0x8000) 765 | BEEP_MASK_TO_REG(val); 766 w83627hf_write_value(data, W83781D_REG_BEEP_INTS1, 767 data->beep_mask & 0xff); 768 w83627hf_write_value(data, W83781D_REG_BEEP_INTS3, 769 ((data->beep_mask) >> 16) & 0xff); 770 w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 771 (data->beep_mask >> 8) & 0xff); 772 773 mutex_unlock(&data->update_lock); 774 return count; 775 } 776 777 static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR, 778 show_beep_mask, store_beep_mask); 779 780 static ssize_t 781 show_beep(struct device *dev, struct device_attribute *attr, char *buf) 782 { 783 struct w83627hf_data *data = w83627hf_update_device(dev); 784 int bitnr = to_sensor_dev_attr(attr)->index; 785 return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1); 786 } 787 788 static ssize_t 789 store_beep(struct device *dev, struct device_attribute *attr, 790 const char *buf, size_t count) 791 { 792 struct w83627hf_data *data = dev_get_drvdata(dev); 793 int bitnr = to_sensor_dev_attr(attr)->index; 794 unsigned long bit; 795 u8 reg; 796 797 bit = simple_strtoul(buf, NULL, 10); 798 if (bit & ~1) 799 return -EINVAL; 800 801 mutex_lock(&data->update_lock); 802 if (bit) 803 data->beep_mask |= (1 << bitnr); 804 else 805 data->beep_mask &= ~(1 << bitnr); 806 807 if (bitnr < 8) { 808 reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS1); 809 if (bit) 810 reg |= (1 << bitnr); 811 else 812 reg &= ~(1 << bitnr); 813 w83627hf_write_value(data, W83781D_REG_BEEP_INTS1, reg); 814 } else if (bitnr < 16) { 815 reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2); 816 if (bit) 817 reg |= (1 << (bitnr - 8)); 818 else 819 reg &= ~(1 << (bitnr - 8)); 820 w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, reg); 821 } else { 822 reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS3); 823 if (bit) 824 reg |= (1 << (bitnr - 16)); 825 else 826 reg &= ~(1 << (bitnr - 16)); 827 w83627hf_write_value(data, W83781D_REG_BEEP_INTS3, reg); 828 } 829 mutex_unlock(&data->update_lock); 830 831 return count; 832 } 833 834 static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR, 835 show_beep, store_beep, 0); 836 static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR, 837 show_beep, store_beep, 1); 838 static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR, 839 show_beep, store_beep, 2); 840 static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR, 841 show_beep, store_beep, 3); 842 static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR, 843 show_beep, store_beep, 8); 844 static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR, 845 show_beep, store_beep, 9); 846 static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR, 847 show_beep, store_beep, 10); 848 static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR, 849 show_beep, store_beep, 16); 850 static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR, 851 show_beep, store_beep, 17); 852 static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR, 853 show_beep, store_beep, 6); 854 static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR, 855 show_beep, store_beep, 7); 856 static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR, 857 show_beep, store_beep, 11); 858 static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR, 859 show_beep, store_beep, 4); 860 static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR, 861 show_beep, store_beep, 5); 862 static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO | S_IWUSR, 863 show_beep, store_beep, 13); 864 static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR, 865 show_beep, store_beep, 15); 866 867 static ssize_t 868 show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) 869 { 870 int nr = to_sensor_dev_attr(devattr)->index; 871 struct w83627hf_data *data = w83627hf_update_device(dev); 872 return sprintf(buf, "%ld\n", 873 (long) DIV_FROM_REG(data->fan_div[nr])); 874 } 875 /* Note: we save and restore the fan minimum here, because its value is 876 determined in part by the fan divisor. This follows the principle of 877 least surprise; the user doesn't expect the fan minimum to change just 878 because the divisor changed. */ 879 static ssize_t 880 store_fan_div(struct device *dev, struct device_attribute *devattr, 881 const char *buf, size_t count) 882 { 883 int nr = to_sensor_dev_attr(devattr)->index; 884 struct w83627hf_data *data = dev_get_drvdata(dev); 885 unsigned long min; 886 u8 reg; 887 unsigned long val = simple_strtoul(buf, NULL, 10); 888 889 mutex_lock(&data->update_lock); 890 891 /* Save fan_min */ 892 min = FAN_FROM_REG(data->fan_min[nr], 893 DIV_FROM_REG(data->fan_div[nr])); 894 895 data->fan_div[nr] = DIV_TO_REG(val); 896 897 reg = (w83627hf_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV) 898 & (nr==0 ? 0xcf : 0x3f)) 899 | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6)); 900 w83627hf_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg); 901 902 reg = (w83627hf_read_value(data, W83781D_REG_VBAT) 903 & ~(1 << (5 + nr))) 904 | ((data->fan_div[nr] & 0x04) << (3 + nr)); 905 w83627hf_write_value(data, W83781D_REG_VBAT, reg); 906 907 /* Restore fan_min */ 908 data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); 909 w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr), data->fan_min[nr]); 910 911 mutex_unlock(&data->update_lock); 912 return count; 913 } 914 915 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO|S_IWUSR, 916 show_fan_div, store_fan_div, 0); 917 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO|S_IWUSR, 918 show_fan_div, store_fan_div, 1); 919 static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO|S_IWUSR, 920 show_fan_div, store_fan_div, 2); 921 922 static ssize_t 923 show_pwm(struct device *dev, struct device_attribute *devattr, char *buf) 924 { 925 int nr = to_sensor_dev_attr(devattr)->index; 926 struct w83627hf_data *data = w83627hf_update_device(dev); 927 return sprintf(buf, "%ld\n", (long) data->pwm[nr]); 928 } 929 930 static ssize_t 931 store_pwm(struct device *dev, struct device_attribute *devattr, 932 const char *buf, size_t count) 933 { 934 int nr = to_sensor_dev_attr(devattr)->index; 935 struct w83627hf_data *data = dev_get_drvdata(dev); 936 u32 val = simple_strtoul(buf, NULL, 10); 937 938 mutex_lock(&data->update_lock); 939 940 if (data->type == w83627thf) { 941 /* bits 0-3 are reserved in 627THF */ 942 data->pwm[nr] = PWM_TO_REG(val) & 0xf0; 943 w83627hf_write_value(data, 944 W836X7HF_REG_PWM(data->type, nr), 945 data->pwm[nr] | 946 (w83627hf_read_value(data, 947 W836X7HF_REG_PWM(data->type, nr)) & 0x0f)); 948 } else { 949 data->pwm[nr] = PWM_TO_REG(val); 950 w83627hf_write_value(data, 951 W836X7HF_REG_PWM(data->type, nr), 952 data->pwm[nr]); 953 } 954 955 mutex_unlock(&data->update_lock); 956 return count; 957 } 958 959 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0); 960 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1); 961 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2); 962 963 static ssize_t 964 show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf) 965 { 966 int nr = to_sensor_dev_attr(devattr)->index; 967 struct w83627hf_data *data = w83627hf_update_device(dev); 968 return sprintf(buf, "%d\n", data->pwm_enable[nr]); 969 } 970 971 static ssize_t 972 store_pwm_enable(struct device *dev, struct device_attribute *devattr, 973 const char *buf, size_t count) 974 { 975 int nr = to_sensor_dev_attr(devattr)->index; 976 struct w83627hf_data *data = dev_get_drvdata(dev); 977 unsigned long val = simple_strtoul(buf, NULL, 10); 978 u8 reg; 979 980 if (!val || (val > 3)) /* modes 1, 2 and 3 are supported */ 981 return -EINVAL; 982 mutex_lock(&data->update_lock); 983 data->pwm_enable[nr] = val; 984 reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]); 985 reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]); 986 reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr]; 987 w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg); 988 mutex_unlock(&data->update_lock); 989 return count; 990 } 991 992 static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, 993 store_pwm_enable, 0); 994 static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, 995 store_pwm_enable, 1); 996 static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, 997 store_pwm_enable, 2); 998 999 static ssize_t 1000 show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf) 1001 { 1002 int nr = to_sensor_dev_attr(devattr)->index; 1003 struct w83627hf_data *data = w83627hf_update_device(dev); 1004 if (data->type == w83627hf) 1005 return sprintf(buf, "%ld\n", 1006 pwm_freq_from_reg_627hf(data->pwm_freq[nr])); 1007 else 1008 return sprintf(buf, "%ld\n", 1009 pwm_freq_from_reg(data->pwm_freq[nr])); 1010 } 1011 1012 static ssize_t 1013 store_pwm_freq(struct device *dev, struct device_attribute *devattr, 1014 const char *buf, size_t count) 1015 { 1016 int nr = to_sensor_dev_attr(devattr)->index; 1017 struct w83627hf_data *data = dev_get_drvdata(dev); 1018 static const u8 mask[]={0xF8, 0x8F}; 1019 u32 val; 1020 1021 val = simple_strtoul(buf, NULL, 10); 1022 1023 mutex_lock(&data->update_lock); 1024 1025 if (data->type == w83627hf) { 1026 data->pwm_freq[nr] = pwm_freq_to_reg_627hf(val); 1027 w83627hf_write_value(data, W83627HF_REG_PWM_FREQ, 1028 (data->pwm_freq[nr] << (nr*4)) | 1029 (w83627hf_read_value(data, 1030 W83627HF_REG_PWM_FREQ) & mask[nr])); 1031 } else { 1032 data->pwm_freq[nr] = pwm_freq_to_reg(val); 1033 w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr], 1034 data->pwm_freq[nr]); 1035 } 1036 1037 mutex_unlock(&data->update_lock); 1038 return count; 1039 } 1040 1041 static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO|S_IWUSR, 1042 show_pwm_freq, store_pwm_freq, 0); 1043 static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO|S_IWUSR, 1044 show_pwm_freq, store_pwm_freq, 1); 1045 static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO|S_IWUSR, 1046 show_pwm_freq, store_pwm_freq, 2); 1047 1048 static ssize_t 1049 show_temp_type(struct device *dev, struct device_attribute *devattr, 1050 char *buf) 1051 { 1052 int nr = to_sensor_dev_attr(devattr)->index; 1053 struct w83627hf_data *data = w83627hf_update_device(dev); 1054 return sprintf(buf, "%ld\n", (long) data->sens[nr]); 1055 } 1056 1057 static ssize_t 1058 store_temp_type(struct device *dev, struct device_attribute *devattr, 1059 const char *buf, size_t count) 1060 { 1061 int nr = to_sensor_dev_attr(devattr)->index; 1062 struct w83627hf_data *data = dev_get_drvdata(dev); 1063 u32 val, tmp; 1064 1065 val = simple_strtoul(buf, NULL, 10); 1066 1067 mutex_lock(&data->update_lock); 1068 1069 switch (val) { 1070 case 1: /* PII/Celeron diode */ 1071 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1); 1072 w83627hf_write_value(data, W83781D_REG_SCFG1, 1073 tmp | BIT_SCFG1[nr]); 1074 tmp = w83627hf_read_value(data, W83781D_REG_SCFG2); 1075 w83627hf_write_value(data, W83781D_REG_SCFG2, 1076 tmp | BIT_SCFG2[nr]); 1077 data->sens[nr] = val; 1078 break; 1079 case 2: /* 3904 */ 1080 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1); 1081 w83627hf_write_value(data, W83781D_REG_SCFG1, 1082 tmp | BIT_SCFG1[nr]); 1083 tmp = w83627hf_read_value(data, W83781D_REG_SCFG2); 1084 w83627hf_write_value(data, W83781D_REG_SCFG2, 1085 tmp & ~BIT_SCFG2[nr]); 1086 data->sens[nr] = val; 1087 break; 1088 case W83781D_DEFAULT_BETA: 1089 dev_warn(dev, "Sensor type %d is deprecated, please use 4 " 1090 "instead\n", W83781D_DEFAULT_BETA); 1091 /* fall through */ 1092 case 4: /* thermistor */ 1093 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1); 1094 w83627hf_write_value(data, W83781D_REG_SCFG1, 1095 tmp & ~BIT_SCFG1[nr]); 1096 data->sens[nr] = val; 1097 break; 1098 default: 1099 dev_err(dev, 1100 "Invalid sensor type %ld; must be 1, 2, or 4\n", 1101 (long) val); 1102 break; 1103 } 1104 1105 mutex_unlock(&data->update_lock); 1106 return count; 1107 } 1108 1109 #define sysfs_temp_type(offset) \ 1110 static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ 1111 show_temp_type, store_temp_type, offset - 1); 1112 1113 sysfs_temp_type(1); 1114 sysfs_temp_type(2); 1115 sysfs_temp_type(3); 1116 1117 static ssize_t 1118 show_name(struct device *dev, struct device_attribute *devattr, char *buf) 1119 { 1120 struct w83627hf_data *data = dev_get_drvdata(dev); 1121 1122 return sprintf(buf, "%s\n", data->name); 1123 } 1124 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); 1125 1126 static int __init w83627hf_find(int sioaddr, unsigned short *addr, 1127 struct w83627hf_sio_data *sio_data) 1128 { 1129 int err = -ENODEV; 1130 u16 val; 1131 1132 static const __initdata char *names[] = { 1133 "W83627HF", 1134 "W83627THF", 1135 "W83697HF", 1136 "W83637HF", 1137 "W83687THF", 1138 }; 1139 1140 sio_data->sioaddr = sioaddr; 1141 superio_enter(sio_data); 1142 val = force_id ? force_id : superio_inb(sio_data, DEVID); 1143 switch (val) { 1144 case W627_DEVID: 1145 sio_data->type = w83627hf; 1146 break; 1147 case W627THF_DEVID: 1148 sio_data->type = w83627thf; 1149 break; 1150 case W697_DEVID: 1151 sio_data->type = w83697hf; 1152 break; 1153 case W637_DEVID: 1154 sio_data->type = w83637hf; 1155 break; 1156 case W687THF_DEVID: 1157 sio_data->type = w83687thf; 1158 break; 1159 case 0xff: /* No device at all */ 1160 goto exit; 1161 default: 1162 pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%02x)\n", val); 1163 goto exit; 1164 } 1165 1166 superio_select(sio_data, W83627HF_LD_HWM); 1167 val = (superio_inb(sio_data, WINB_BASE_REG) << 8) | 1168 superio_inb(sio_data, WINB_BASE_REG + 1); 1169 *addr = val & WINB_ALIGNMENT; 1170 if (*addr == 0) { 1171 pr_warn("Base address not set, skipping\n"); 1172 goto exit; 1173 } 1174 1175 val = superio_inb(sio_data, WINB_ACT_REG); 1176 if (!(val & 0x01)) { 1177 pr_warn("Enabling HWM logical device\n"); 1178 superio_outb(sio_data, WINB_ACT_REG, val | 0x01); 1179 } 1180 1181 err = 0; 1182 pr_info(DRVNAME ": Found %s chip at %#x\n", 1183 names[sio_data->type], *addr); 1184 1185 exit: 1186 superio_exit(sio_data); 1187 return err; 1188 } 1189 1190 #define VIN_UNIT_ATTRS(_X_) \ 1191 &sensor_dev_attr_in##_X_##_input.dev_attr.attr, \ 1192 &sensor_dev_attr_in##_X_##_min.dev_attr.attr, \ 1193 &sensor_dev_attr_in##_X_##_max.dev_attr.attr, \ 1194 &sensor_dev_attr_in##_X_##_alarm.dev_attr.attr, \ 1195 &sensor_dev_attr_in##_X_##_beep.dev_attr.attr 1196 1197 #define FAN_UNIT_ATTRS(_X_) \ 1198 &sensor_dev_attr_fan##_X_##_input.dev_attr.attr, \ 1199 &sensor_dev_attr_fan##_X_##_min.dev_attr.attr, \ 1200 &sensor_dev_attr_fan##_X_##_div.dev_attr.attr, \ 1201 &sensor_dev_attr_fan##_X_##_alarm.dev_attr.attr, \ 1202 &sensor_dev_attr_fan##_X_##_beep.dev_attr.attr 1203 1204 #define TEMP_UNIT_ATTRS(_X_) \ 1205 &sensor_dev_attr_temp##_X_##_input.dev_attr.attr, \ 1206 &sensor_dev_attr_temp##_X_##_max.dev_attr.attr, \ 1207 &sensor_dev_attr_temp##_X_##_max_hyst.dev_attr.attr, \ 1208 &sensor_dev_attr_temp##_X_##_type.dev_attr.attr, \ 1209 &sensor_dev_attr_temp##_X_##_alarm.dev_attr.attr, \ 1210 &sensor_dev_attr_temp##_X_##_beep.dev_attr.attr 1211 1212 static struct attribute *w83627hf_attributes[] = { 1213 &dev_attr_in0_input.attr, 1214 &dev_attr_in0_min.attr, 1215 &dev_attr_in0_max.attr, 1216 &sensor_dev_attr_in0_alarm.dev_attr.attr, 1217 &sensor_dev_attr_in0_beep.dev_attr.attr, 1218 VIN_UNIT_ATTRS(2), 1219 VIN_UNIT_ATTRS(3), 1220 VIN_UNIT_ATTRS(4), 1221 VIN_UNIT_ATTRS(7), 1222 VIN_UNIT_ATTRS(8), 1223 1224 FAN_UNIT_ATTRS(1), 1225 FAN_UNIT_ATTRS(2), 1226 1227 TEMP_UNIT_ATTRS(1), 1228 TEMP_UNIT_ATTRS(2), 1229 1230 &dev_attr_alarms.attr, 1231 &sensor_dev_attr_beep_enable.dev_attr.attr, 1232 &dev_attr_beep_mask.attr, 1233 1234 &sensor_dev_attr_pwm1.dev_attr.attr, 1235 &sensor_dev_attr_pwm2.dev_attr.attr, 1236 &dev_attr_name.attr, 1237 NULL 1238 }; 1239 1240 static const struct attribute_group w83627hf_group = { 1241 .attrs = w83627hf_attributes, 1242 }; 1243 1244 static struct attribute *w83627hf_attributes_opt[] = { 1245 VIN_UNIT_ATTRS(1), 1246 VIN_UNIT_ATTRS(5), 1247 VIN_UNIT_ATTRS(6), 1248 1249 FAN_UNIT_ATTRS(3), 1250 TEMP_UNIT_ATTRS(3), 1251 &sensor_dev_attr_pwm3.dev_attr.attr, 1252 1253 &sensor_dev_attr_pwm1_freq.dev_attr.attr, 1254 &sensor_dev_attr_pwm2_freq.dev_attr.attr, 1255 &sensor_dev_attr_pwm3_freq.dev_attr.attr, 1256 1257 &sensor_dev_attr_pwm1_enable.dev_attr.attr, 1258 &sensor_dev_attr_pwm2_enable.dev_attr.attr, 1259 &sensor_dev_attr_pwm3_enable.dev_attr.attr, 1260 1261 NULL 1262 }; 1263 1264 static const struct attribute_group w83627hf_group_opt = { 1265 .attrs = w83627hf_attributes_opt, 1266 }; 1267 1268 static int __devinit w83627hf_probe(struct platform_device *pdev) 1269 { 1270 struct device *dev = &pdev->dev; 1271 struct w83627hf_sio_data *sio_data = dev->platform_data; 1272 struct w83627hf_data *data; 1273 struct resource *res; 1274 int err, i; 1275 1276 static const char *names[] = { 1277 "w83627hf", 1278 "w83627thf", 1279 "w83697hf", 1280 "w83637hf", 1281 "w83687thf", 1282 }; 1283 1284 res = platform_get_resource(pdev, IORESOURCE_IO, 0); 1285 if (!request_region(res->start, WINB_REGION_SIZE, DRVNAME)) { 1286 dev_err(dev, "Failed to request region 0x%lx-0x%lx\n", 1287 (unsigned long)res->start, 1288 (unsigned long)(res->start + WINB_REGION_SIZE - 1)); 1289 err = -EBUSY; 1290 goto ERROR0; 1291 } 1292 1293 if (!(data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) { 1294 err = -ENOMEM; 1295 goto ERROR1; 1296 } 1297 data->addr = res->start; 1298 data->type = sio_data->type; 1299 data->name = names[sio_data->type]; 1300 mutex_init(&data->lock); 1301 mutex_init(&data->update_lock); 1302 platform_set_drvdata(pdev, data); 1303 1304 /* Initialize the chip */ 1305 w83627hf_init_device(pdev); 1306 1307 /* A few vars need to be filled upon startup */ 1308 for (i = 0; i <= 2; i++) 1309 data->fan_min[i] = w83627hf_read_value( 1310 data, W83627HF_REG_FAN_MIN(i)); 1311 w83627hf_update_fan_div(data); 1312 1313 /* Register common device attributes */ 1314 if ((err = sysfs_create_group(&dev->kobj, &w83627hf_group))) 1315 goto ERROR3; 1316 1317 /* Register chip-specific device attributes */ 1318 if (data->type == w83627hf || data->type == w83697hf) 1319 if ((err = device_create_file(dev, 1320 &sensor_dev_attr_in5_input.dev_attr)) 1321 || (err = device_create_file(dev, 1322 &sensor_dev_attr_in5_min.dev_attr)) 1323 || (err = device_create_file(dev, 1324 &sensor_dev_attr_in5_max.dev_attr)) 1325 || (err = device_create_file(dev, 1326 &sensor_dev_attr_in5_alarm.dev_attr)) 1327 || (err = device_create_file(dev, 1328 &sensor_dev_attr_in5_beep.dev_attr)) 1329 || (err = device_create_file(dev, 1330 &sensor_dev_attr_in6_input.dev_attr)) 1331 || (err = device_create_file(dev, 1332 &sensor_dev_attr_in6_min.dev_attr)) 1333 || (err = device_create_file(dev, 1334 &sensor_dev_attr_in6_max.dev_attr)) 1335 || (err = device_create_file(dev, 1336 &sensor_dev_attr_in6_alarm.dev_attr)) 1337 || (err = device_create_file(dev, 1338 &sensor_dev_attr_in6_beep.dev_attr)) 1339 || (err = device_create_file(dev, 1340 &sensor_dev_attr_pwm1_freq.dev_attr)) 1341 || (err = device_create_file(dev, 1342 &sensor_dev_attr_pwm2_freq.dev_attr))) 1343 goto ERROR4; 1344 1345 if (data->type != w83697hf) 1346 if ((err = device_create_file(dev, 1347 &sensor_dev_attr_in1_input.dev_attr)) 1348 || (err = device_create_file(dev, 1349 &sensor_dev_attr_in1_min.dev_attr)) 1350 || (err = device_create_file(dev, 1351 &sensor_dev_attr_in1_max.dev_attr)) 1352 || (err = device_create_file(dev, 1353 &sensor_dev_attr_in1_alarm.dev_attr)) 1354 || (err = device_create_file(dev, 1355 &sensor_dev_attr_in1_beep.dev_attr)) 1356 || (err = device_create_file(dev, 1357 &sensor_dev_attr_fan3_input.dev_attr)) 1358 || (err = device_create_file(dev, 1359 &sensor_dev_attr_fan3_min.dev_attr)) 1360 || (err = device_create_file(dev, 1361 &sensor_dev_attr_fan3_div.dev_attr)) 1362 || (err = device_create_file(dev, 1363 &sensor_dev_attr_fan3_alarm.dev_attr)) 1364 || (err = device_create_file(dev, 1365 &sensor_dev_attr_fan3_beep.dev_attr)) 1366 || (err = device_create_file(dev, 1367 &sensor_dev_attr_temp3_input.dev_attr)) 1368 || (err = device_create_file(dev, 1369 &sensor_dev_attr_temp3_max.dev_attr)) 1370 || (err = device_create_file(dev, 1371 &sensor_dev_attr_temp3_max_hyst.dev_attr)) 1372 || (err = device_create_file(dev, 1373 &sensor_dev_attr_temp3_alarm.dev_attr)) 1374 || (err = device_create_file(dev, 1375 &sensor_dev_attr_temp3_beep.dev_attr)) 1376 || (err = device_create_file(dev, 1377 &sensor_dev_attr_temp3_type.dev_attr))) 1378 goto ERROR4; 1379 1380 if (data->type != w83697hf && data->vid != 0xff) { 1381 /* Convert VID to voltage based on VRM */ 1382 data->vrm = vid_which_vrm(); 1383 1384 if ((err = device_create_file(dev, &dev_attr_cpu0_vid)) 1385 || (err = device_create_file(dev, &dev_attr_vrm))) 1386 goto ERROR4; 1387 } 1388 1389 if (data->type == w83627thf || data->type == w83637hf 1390 || data->type == w83687thf) 1391 if ((err = device_create_file(dev, 1392 &sensor_dev_attr_pwm3.dev_attr))) 1393 goto ERROR4; 1394 1395 if (data->type == w83637hf || data->type == w83687thf) 1396 if ((err = device_create_file(dev, 1397 &sensor_dev_attr_pwm1_freq.dev_attr)) 1398 || (err = device_create_file(dev, 1399 &sensor_dev_attr_pwm2_freq.dev_attr)) 1400 || (err = device_create_file(dev, 1401 &sensor_dev_attr_pwm3_freq.dev_attr))) 1402 goto ERROR4; 1403 1404 if (data->type != w83627hf) 1405 if ((err = device_create_file(dev, 1406 &sensor_dev_attr_pwm1_enable.dev_attr)) 1407 || (err = device_create_file(dev, 1408 &sensor_dev_attr_pwm2_enable.dev_attr))) 1409 goto ERROR4; 1410 1411 if (data->type == w83627thf || data->type == w83637hf 1412 || data->type == w83687thf) 1413 if ((err = device_create_file(dev, 1414 &sensor_dev_attr_pwm3_enable.dev_attr))) 1415 goto ERROR4; 1416 1417 data->hwmon_dev = hwmon_device_register(dev); 1418 if (IS_ERR(data->hwmon_dev)) { 1419 err = PTR_ERR(data->hwmon_dev); 1420 goto ERROR4; 1421 } 1422 1423 return 0; 1424 1425 ERROR4: 1426 sysfs_remove_group(&dev->kobj, &w83627hf_group); 1427 sysfs_remove_group(&dev->kobj, &w83627hf_group_opt); 1428 ERROR3: 1429 platform_set_drvdata(pdev, NULL); 1430 kfree(data); 1431 ERROR1: 1432 release_region(res->start, WINB_REGION_SIZE); 1433 ERROR0: 1434 return err; 1435 } 1436 1437 static int __devexit w83627hf_remove(struct platform_device *pdev) 1438 { 1439 struct w83627hf_data *data = platform_get_drvdata(pdev); 1440 struct resource *res; 1441 1442 hwmon_device_unregister(data->hwmon_dev); 1443 1444 sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group); 1445 sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt); 1446 platform_set_drvdata(pdev, NULL); 1447 kfree(data); 1448 1449 res = platform_get_resource(pdev, IORESOURCE_IO, 0); 1450 release_region(res->start, WINB_REGION_SIZE); 1451 1452 return 0; 1453 } 1454 1455 1456 /* Registers 0x50-0x5f are banked */ 1457 static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg) 1458 { 1459 if ((reg & 0x00f0) == 0x50) { 1460 outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET); 1461 outb_p(reg >> 8, data->addr + W83781D_DATA_REG_OFFSET); 1462 } 1463 } 1464 1465 /* Not strictly necessary, but play it safe for now */ 1466 static inline void w83627hf_reset_bank(struct w83627hf_data *data, u16 reg) 1467 { 1468 if (reg & 0xff00) { 1469 outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET); 1470 outb_p(0, data->addr + W83781D_DATA_REG_OFFSET); 1471 } 1472 } 1473 1474 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg) 1475 { 1476 int res, word_sized; 1477 1478 mutex_lock(&data->lock); 1479 word_sized = (((reg & 0xff00) == 0x100) 1480 || ((reg & 0xff00) == 0x200)) 1481 && (((reg & 0x00ff) == 0x50) 1482 || ((reg & 0x00ff) == 0x53) 1483 || ((reg & 0x00ff) == 0x55)); 1484 w83627hf_set_bank(data, reg); 1485 outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET); 1486 res = inb_p(data->addr + W83781D_DATA_REG_OFFSET); 1487 if (word_sized) { 1488 outb_p((reg & 0xff) + 1, 1489 data->addr + W83781D_ADDR_REG_OFFSET); 1490 res = 1491 (res << 8) + inb_p(data->addr + 1492 W83781D_DATA_REG_OFFSET); 1493 } 1494 w83627hf_reset_bank(data, reg); 1495 mutex_unlock(&data->lock); 1496 return res; 1497 } 1498 1499 static int __devinit w83627thf_read_gpio5(struct platform_device *pdev) 1500 { 1501 struct w83627hf_sio_data *sio_data = pdev->dev.platform_data; 1502 int res = 0xff, sel; 1503 1504 superio_enter(sio_data); 1505 superio_select(sio_data, W83627HF_LD_GPIO5); 1506 1507 /* Make sure these GPIO pins are enabled */ 1508 if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) { 1509 dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n"); 1510 goto exit; 1511 } 1512 1513 /* Make sure the pins are configured for input 1514 There must be at least five (VRM 9), and possibly 6 (VRM 10) */ 1515 sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f; 1516 if ((sel & 0x1f) != 0x1f) { 1517 dev_dbg(&pdev->dev, "GPIO5 not configured for VID " 1518 "function\n"); 1519 goto exit; 1520 } 1521 1522 dev_info(&pdev->dev, "Reading VID from GPIO5\n"); 1523 res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel; 1524 1525 exit: 1526 superio_exit(sio_data); 1527 return res; 1528 } 1529 1530 static int __devinit w83687thf_read_vid(struct platform_device *pdev) 1531 { 1532 struct w83627hf_sio_data *sio_data = pdev->dev.platform_data; 1533 int res = 0xff; 1534 1535 superio_enter(sio_data); 1536 superio_select(sio_data, W83627HF_LD_HWM); 1537 1538 /* Make sure these GPIO pins are enabled */ 1539 if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) { 1540 dev_dbg(&pdev->dev, "VID disabled, no VID function\n"); 1541 goto exit; 1542 } 1543 1544 /* Make sure the pins are configured for input */ 1545 if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) { 1546 dev_dbg(&pdev->dev, "VID configured as output, " 1547 "no VID function\n"); 1548 goto exit; 1549 } 1550 1551 res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f; 1552 1553 exit: 1554 superio_exit(sio_data); 1555 return res; 1556 } 1557 1558 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value) 1559 { 1560 int word_sized; 1561 1562 mutex_lock(&data->lock); 1563 word_sized = (((reg & 0xff00) == 0x100) 1564 || ((reg & 0xff00) == 0x200)) 1565 && (((reg & 0x00ff) == 0x53) 1566 || ((reg & 0x00ff) == 0x55)); 1567 w83627hf_set_bank(data, reg); 1568 outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET); 1569 if (word_sized) { 1570 outb_p(value >> 8, 1571 data->addr + W83781D_DATA_REG_OFFSET); 1572 outb_p((reg & 0xff) + 1, 1573 data->addr + W83781D_ADDR_REG_OFFSET); 1574 } 1575 outb_p(value & 0xff, 1576 data->addr + W83781D_DATA_REG_OFFSET); 1577 w83627hf_reset_bank(data, reg); 1578 mutex_unlock(&data->lock); 1579 return 0; 1580 } 1581 1582 static void __devinit w83627hf_init_device(struct platform_device *pdev) 1583 { 1584 struct w83627hf_data *data = platform_get_drvdata(pdev); 1585 int i; 1586 enum chips type = data->type; 1587 u8 tmp; 1588 1589 /* Minimize conflicts with other winbond i2c-only clients... */ 1590 /* disable i2c subclients... how to disable main i2c client?? */ 1591 /* force i2c address to relatively uncommon address */ 1592 w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89); 1593 w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c); 1594 1595 /* Read VID only once */ 1596 if (type == w83627hf || type == w83637hf) { 1597 int lo = w83627hf_read_value(data, W83781D_REG_VID_FANDIV); 1598 int hi = w83627hf_read_value(data, W83781D_REG_CHIPID); 1599 data->vid = (lo & 0x0f) | ((hi & 0x01) << 4); 1600 } else if (type == w83627thf) { 1601 data->vid = w83627thf_read_gpio5(pdev); 1602 } else if (type == w83687thf) { 1603 data->vid = w83687thf_read_vid(pdev); 1604 } 1605 1606 /* Read VRM & OVT Config only once */ 1607 if (type == w83627thf || type == w83637hf || type == w83687thf) { 1608 data->vrm_ovt = 1609 w83627hf_read_value(data, W83627THF_REG_VRM_OVT_CFG); 1610 } 1611 1612 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1); 1613 for (i = 1; i <= 3; i++) { 1614 if (!(tmp & BIT_SCFG1[i - 1])) { 1615 data->sens[i - 1] = 4; 1616 } else { 1617 if (w83627hf_read_value 1618 (data, 1619 W83781D_REG_SCFG2) & BIT_SCFG2[i - 1]) 1620 data->sens[i - 1] = 1; 1621 else 1622 data->sens[i - 1] = 2; 1623 } 1624 if ((type == w83697hf) && (i == 2)) 1625 break; 1626 } 1627 1628 if(init) { 1629 /* Enable temp2 */ 1630 tmp = w83627hf_read_value(data, W83627HF_REG_TEMP2_CONFIG); 1631 if (tmp & 0x01) { 1632 dev_warn(&pdev->dev, "Enabling temp2, readings " 1633 "might not make sense\n"); 1634 w83627hf_write_value(data, W83627HF_REG_TEMP2_CONFIG, 1635 tmp & 0xfe); 1636 } 1637 1638 /* Enable temp3 */ 1639 if (type != w83697hf) { 1640 tmp = w83627hf_read_value(data, 1641 W83627HF_REG_TEMP3_CONFIG); 1642 if (tmp & 0x01) { 1643 dev_warn(&pdev->dev, "Enabling temp3, " 1644 "readings might not make sense\n"); 1645 w83627hf_write_value(data, 1646 W83627HF_REG_TEMP3_CONFIG, tmp & 0xfe); 1647 } 1648 } 1649 } 1650 1651 /* Start monitoring */ 1652 w83627hf_write_value(data, W83781D_REG_CONFIG, 1653 (w83627hf_read_value(data, 1654 W83781D_REG_CONFIG) & 0xf7) 1655 | 0x01); 1656 1657 /* Enable VBAT monitoring if needed */ 1658 tmp = w83627hf_read_value(data, W83781D_REG_VBAT); 1659 if (!(tmp & 0x01)) 1660 w83627hf_write_value(data, W83781D_REG_VBAT, tmp | 0x01); 1661 } 1662 1663 static void w83627hf_update_fan_div(struct w83627hf_data *data) 1664 { 1665 int reg; 1666 1667 reg = w83627hf_read_value(data, W83781D_REG_VID_FANDIV); 1668 data->fan_div[0] = (reg >> 4) & 0x03; 1669 data->fan_div[1] = (reg >> 6) & 0x03; 1670 if (data->type != w83697hf) { 1671 data->fan_div[2] = (w83627hf_read_value(data, 1672 W83781D_REG_PIN) >> 6) & 0x03; 1673 } 1674 reg = w83627hf_read_value(data, W83781D_REG_VBAT); 1675 data->fan_div[0] |= (reg >> 3) & 0x04; 1676 data->fan_div[1] |= (reg >> 4) & 0x04; 1677 if (data->type != w83697hf) 1678 data->fan_div[2] |= (reg >> 5) & 0x04; 1679 } 1680 1681 static struct w83627hf_data *w83627hf_update_device(struct device *dev) 1682 { 1683 struct w83627hf_data *data = dev_get_drvdata(dev); 1684 int i, num_temps = (data->type == w83697hf) ? 2 : 3; 1685 int num_pwms = (data->type == w83697hf) ? 2 : 3; 1686 1687 mutex_lock(&data->update_lock); 1688 1689 if (time_after(jiffies, data->last_updated + HZ + HZ / 2) 1690 || !data->valid) { 1691 for (i = 0; i <= 8; i++) { 1692 /* skip missing sensors */ 1693 if (((data->type == w83697hf) && (i == 1)) || 1694 ((data->type != w83627hf && data->type != w83697hf) 1695 && (i == 5 || i == 6))) 1696 continue; 1697 data->in[i] = 1698 w83627hf_read_value(data, W83781D_REG_IN(i)); 1699 data->in_min[i] = 1700 w83627hf_read_value(data, 1701 W83781D_REG_IN_MIN(i)); 1702 data->in_max[i] = 1703 w83627hf_read_value(data, 1704 W83781D_REG_IN_MAX(i)); 1705 } 1706 for (i = 0; i <= 2; i++) { 1707 data->fan[i] = 1708 w83627hf_read_value(data, W83627HF_REG_FAN(i)); 1709 data->fan_min[i] = 1710 w83627hf_read_value(data, 1711 W83627HF_REG_FAN_MIN(i)); 1712 } 1713 for (i = 0; i <= 2; i++) { 1714 u8 tmp = w83627hf_read_value(data, 1715 W836X7HF_REG_PWM(data->type, i)); 1716 /* bits 0-3 are reserved in 627THF */ 1717 if (data->type == w83627thf) 1718 tmp &= 0xf0; 1719 data->pwm[i] = tmp; 1720 if (i == 1 && 1721 (data->type == w83627hf || data->type == w83697hf)) 1722 break; 1723 } 1724 if (data->type == w83627hf) { 1725 u8 tmp = w83627hf_read_value(data, 1726 W83627HF_REG_PWM_FREQ); 1727 data->pwm_freq[0] = tmp & 0x07; 1728 data->pwm_freq[1] = (tmp >> 4) & 0x07; 1729 } else if (data->type != w83627thf) { 1730 for (i = 1; i <= 3; i++) { 1731 data->pwm_freq[i - 1] = 1732 w83627hf_read_value(data, 1733 W83637HF_REG_PWM_FREQ[i - 1]); 1734 if (i == 2 && (data->type == w83697hf)) 1735 break; 1736 } 1737 } 1738 if (data->type != w83627hf) { 1739 for (i = 0; i < num_pwms; i++) { 1740 u8 tmp = w83627hf_read_value(data, 1741 W83627THF_REG_PWM_ENABLE[i]); 1742 data->pwm_enable[i] = 1743 ((tmp >> W83627THF_PWM_ENABLE_SHIFT[i]) 1744 & 0x03) + 1; 1745 } 1746 } 1747 for (i = 0; i < num_temps; i++) { 1748 data->temp[i] = w83627hf_read_value( 1749 data, w83627hf_reg_temp[i]); 1750 data->temp_max[i] = w83627hf_read_value( 1751 data, w83627hf_reg_temp_over[i]); 1752 data->temp_max_hyst[i] = w83627hf_read_value( 1753 data, w83627hf_reg_temp_hyst[i]); 1754 } 1755 1756 w83627hf_update_fan_div(data); 1757 1758 data->alarms = 1759 w83627hf_read_value(data, W83781D_REG_ALARM1) | 1760 (w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) | 1761 (w83627hf_read_value(data, W83781D_REG_ALARM3) << 16); 1762 i = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2); 1763 data->beep_mask = (i << 8) | 1764 w83627hf_read_value(data, W83781D_REG_BEEP_INTS1) | 1765 w83627hf_read_value(data, W83781D_REG_BEEP_INTS3) << 16; 1766 data->last_updated = jiffies; 1767 data->valid = 1; 1768 } 1769 1770 mutex_unlock(&data->update_lock); 1771 1772 return data; 1773 } 1774 1775 static int __init w83627hf_device_add(unsigned short address, 1776 const struct w83627hf_sio_data *sio_data) 1777 { 1778 struct resource res = { 1779 .start = address + WINB_REGION_OFFSET, 1780 .end = address + WINB_REGION_OFFSET + WINB_REGION_SIZE - 1, 1781 .name = DRVNAME, 1782 .flags = IORESOURCE_IO, 1783 }; 1784 int err; 1785 1786 err = acpi_check_resource_conflict(&res); 1787 if (err) 1788 goto exit; 1789 1790 pdev = platform_device_alloc(DRVNAME, address); 1791 if (!pdev) { 1792 err = -ENOMEM; 1793 pr_err("Device allocation failed\n"); 1794 goto exit; 1795 } 1796 1797 err = platform_device_add_resources(pdev, &res, 1); 1798 if (err) { 1799 pr_err("Device resource addition failed (%d)\n", err); 1800 goto exit_device_put; 1801 } 1802 1803 err = platform_device_add_data(pdev, sio_data, 1804 sizeof(struct w83627hf_sio_data)); 1805 if (err) { 1806 pr_err("Platform data allocation failed\n"); 1807 goto exit_device_put; 1808 } 1809 1810 err = platform_device_add(pdev); 1811 if (err) { 1812 pr_err("Device addition failed (%d)\n", err); 1813 goto exit_device_put; 1814 } 1815 1816 return 0; 1817 1818 exit_device_put: 1819 platform_device_put(pdev); 1820 exit: 1821 return err; 1822 } 1823 1824 static int __init sensors_w83627hf_init(void) 1825 { 1826 int err; 1827 unsigned short address; 1828 struct w83627hf_sio_data sio_data; 1829 1830 if (w83627hf_find(0x2e, &address, &sio_data) 1831 && w83627hf_find(0x4e, &address, &sio_data)) 1832 return -ENODEV; 1833 1834 err = platform_driver_register(&w83627hf_driver); 1835 if (err) 1836 goto exit; 1837 1838 /* Sets global pdev as a side effect */ 1839 err = w83627hf_device_add(address, &sio_data); 1840 if (err) 1841 goto exit_driver; 1842 1843 return 0; 1844 1845 exit_driver: 1846 platform_driver_unregister(&w83627hf_driver); 1847 exit: 1848 return err; 1849 } 1850 1851 static void __exit sensors_w83627hf_exit(void) 1852 { 1853 platform_device_unregister(pdev); 1854 platform_driver_unregister(&w83627hf_driver); 1855 } 1856 1857 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " 1858 "Philip Edelbrock <phil@netroedge.com>, " 1859 "and Mark Studebaker <mdsxyz123@yahoo.com>"); 1860 MODULE_DESCRIPTION("W83627HF driver"); 1861 MODULE_LICENSE("GPL"); 1862 1863 module_init(sensors_w83627hf_init); 1864 module_exit(sensors_w83627hf_exit); 1865