xref: /linux/drivers/hwmon/tmp401.c (revision c0e297dc61f8d4453e07afbea1fa8d0e67cd4a34)
1 /* tmp401.c
2  *
3  * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
4  * Preliminary tmp411 support by:
5  * Gabriel Konat, Sander Leget, Wouter Willems
6  * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
7  *
8  * Cleanup and support for TMP431 and TMP432 by Guenter Roeck
9  * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24  */
25 
26 /*
27  * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
28  *
29  * Note this IC is in some aspect similar to the LM90, but it has quite a
30  * few differences too, for example the local temp has a higher resolution
31  * and thus has 16 bits registers for its value and limit instead of 8 bits.
32  */
33 
34 #include <linux/module.h>
35 #include <linux/init.h>
36 #include <linux/bitops.h>
37 #include <linux/slab.h>
38 #include <linux/jiffies.h>
39 #include <linux/i2c.h>
40 #include <linux/hwmon.h>
41 #include <linux/hwmon-sysfs.h>
42 #include <linux/err.h>
43 #include <linux/mutex.h>
44 #include <linux/sysfs.h>
45 
46 /* Addresses to scan */
47 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d,
48 	0x4e, 0x4f, I2C_CLIENT_END };
49 
50 enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
51 
52 /*
53  * The TMP401 registers, note some registers have different addresses for
54  * reading and writing
55  */
56 #define TMP401_STATUS				0x02
57 #define TMP401_CONFIG_READ			0x03
58 #define TMP401_CONFIG_WRITE			0x09
59 #define TMP401_CONVERSION_RATE_READ		0x04
60 #define TMP401_CONVERSION_RATE_WRITE		0x0A
61 #define TMP401_TEMP_CRIT_HYST			0x21
62 #define TMP401_MANUFACTURER_ID_REG		0xFE
63 #define TMP401_DEVICE_ID_REG			0xFF
64 
65 static const u8 TMP401_TEMP_MSB_READ[6][2] = {
66 	{ 0x00, 0x01 },	/* temp */
67 	{ 0x06, 0x08 },	/* low limit */
68 	{ 0x05, 0x07 },	/* high limit */
69 	{ 0x20, 0x19 },	/* therm (crit) limit */
70 	{ 0x30, 0x34 },	/* lowest */
71 	{ 0x32, 0x36 },	/* highest */
72 };
73 
74 static const u8 TMP401_TEMP_MSB_WRITE[6][2] = {
75 	{ 0, 0 },	/* temp (unused) */
76 	{ 0x0C, 0x0E },	/* low limit */
77 	{ 0x0B, 0x0D },	/* high limit */
78 	{ 0x20, 0x19 },	/* therm (crit) limit */
79 	{ 0x30, 0x34 },	/* lowest */
80 	{ 0x32, 0x36 },	/* highest */
81 };
82 
83 static const u8 TMP401_TEMP_LSB[6][2] = {
84 	{ 0x15, 0x10 },	/* temp */
85 	{ 0x17, 0x14 },	/* low limit */
86 	{ 0x16, 0x13 },	/* high limit */
87 	{ 0, 0 },	/* therm (crit) limit (unused) */
88 	{ 0x31, 0x35 },	/* lowest */
89 	{ 0x33, 0x37 },	/* highest */
90 };
91 
92 static const u8 TMP432_TEMP_MSB_READ[4][3] = {
93 	{ 0x00, 0x01, 0x23 },	/* temp */
94 	{ 0x06, 0x08, 0x16 },	/* low limit */
95 	{ 0x05, 0x07, 0x15 },	/* high limit */
96 	{ 0x20, 0x19, 0x1A },	/* therm (crit) limit */
97 };
98 
99 static const u8 TMP432_TEMP_MSB_WRITE[4][3] = {
100 	{ 0, 0, 0 },		/* temp  - unused */
101 	{ 0x0C, 0x0E, 0x16 },	/* low limit */
102 	{ 0x0B, 0x0D, 0x15 },	/* high limit */
103 	{ 0x20, 0x19, 0x1A },	/* therm (crit) limit */
104 };
105 
106 static const u8 TMP432_TEMP_LSB[3][3] = {
107 	{ 0x29, 0x10, 0x24 },	/* temp */
108 	{ 0x3E, 0x14, 0x18 },	/* low limit */
109 	{ 0x3D, 0x13, 0x17 },	/* high limit */
110 };
111 
112 /* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
113 static const u8 TMP432_STATUS_REG[] = {
114 	0x1b, 0x36, 0x35, 0x37 };
115 
116 /* Flags */
117 #define TMP401_CONFIG_RANGE			BIT(2)
118 #define TMP401_CONFIG_SHUTDOWN			BIT(6)
119 #define TMP401_STATUS_LOCAL_CRIT		BIT(0)
120 #define TMP401_STATUS_REMOTE_CRIT		BIT(1)
121 #define TMP401_STATUS_REMOTE_OPEN		BIT(2)
122 #define TMP401_STATUS_REMOTE_LOW		BIT(3)
123 #define TMP401_STATUS_REMOTE_HIGH		BIT(4)
124 #define TMP401_STATUS_LOCAL_LOW			BIT(5)
125 #define TMP401_STATUS_LOCAL_HIGH		BIT(6)
126 
127 /* On TMP432, each status has its own register */
128 #define TMP432_STATUS_LOCAL			BIT(0)
129 #define TMP432_STATUS_REMOTE1			BIT(1)
130 #define TMP432_STATUS_REMOTE2			BIT(2)
131 
132 /* Manufacturer / Device ID's */
133 #define TMP401_MANUFACTURER_ID			0x55
134 #define TMP401_DEVICE_ID			0x11
135 #define TMP411A_DEVICE_ID			0x12
136 #define TMP411B_DEVICE_ID			0x13
137 #define TMP411C_DEVICE_ID			0x10
138 #define TMP431_DEVICE_ID			0x31
139 #define TMP432_DEVICE_ID			0x32
140 #define TMP435_DEVICE_ID			0x35
141 
142 /*
143  * Driver data (common to all clients)
144  */
145 
146 static const struct i2c_device_id tmp401_id[] = {
147 	{ "tmp401", tmp401 },
148 	{ "tmp411", tmp411 },
149 	{ "tmp431", tmp431 },
150 	{ "tmp432", tmp432 },
151 	{ "tmp435", tmp435 },
152 	{ }
153 };
154 MODULE_DEVICE_TABLE(i2c, tmp401_id);
155 
156 /*
157  * Client data (each client gets its own)
158  */
159 
160 struct tmp401_data {
161 	struct i2c_client *client;
162 	const struct attribute_group *groups[3];
163 	struct mutex update_lock;
164 	char valid; /* zero until following fields are valid */
165 	unsigned long last_updated; /* in jiffies */
166 	enum chips kind;
167 
168 	unsigned int update_interval;	/* in milliseconds */
169 
170 	/* register values */
171 	u8 status[4];
172 	u8 config;
173 	u16 temp[6][3];
174 	u8 temp_crit_hyst;
175 };
176 
177 /*
178  * Sysfs attr show / store functions
179  */
180 
181 static int tmp401_register_to_temp(u16 reg, u8 config)
182 {
183 	int temp = reg;
184 
185 	if (config & TMP401_CONFIG_RANGE)
186 		temp -= 64 * 256;
187 
188 	return DIV_ROUND_CLOSEST(temp * 125, 32);
189 }
190 
191 static u16 tmp401_temp_to_register(long temp, u8 config, int zbits)
192 {
193 	if (config & TMP401_CONFIG_RANGE) {
194 		temp = clamp_val(temp, -64000, 191000);
195 		temp += 64000;
196 	} else
197 		temp = clamp_val(temp, 0, 127000);
198 
199 	return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
200 }
201 
202 static int tmp401_update_device_reg16(struct i2c_client *client,
203 				      struct tmp401_data *data)
204 {
205 	int i, j, val;
206 	int num_regs = data->kind == tmp411 ? 6 : 4;
207 	int num_sensors = data->kind == tmp432 ? 3 : 2;
208 
209 	for (i = 0; i < num_sensors; i++) {		/* local / r1 / r2 */
210 		for (j = 0; j < num_regs; j++) {	/* temp / low / ... */
211 			u8 regaddr;
212 			/*
213 			 * High byte must be read first immediately followed
214 			 * by the low byte
215 			 */
216 			regaddr = data->kind == tmp432 ?
217 						TMP432_TEMP_MSB_READ[j][i] :
218 						TMP401_TEMP_MSB_READ[j][i];
219 			val = i2c_smbus_read_byte_data(client, regaddr);
220 			if (val < 0)
221 				return val;
222 			data->temp[j][i] = val << 8;
223 			if (j == 3)		/* crit is msb only */
224 				continue;
225 			regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i]
226 						       : TMP401_TEMP_LSB[j][i];
227 			val = i2c_smbus_read_byte_data(client, regaddr);
228 			if (val < 0)
229 				return val;
230 			data->temp[j][i] |= val;
231 		}
232 	}
233 	return 0;
234 }
235 
236 static struct tmp401_data *tmp401_update_device(struct device *dev)
237 {
238 	struct tmp401_data *data = dev_get_drvdata(dev);
239 	struct i2c_client *client = data->client;
240 	struct tmp401_data *ret = data;
241 	int i, val;
242 	unsigned long next_update;
243 
244 	mutex_lock(&data->update_lock);
245 
246 	next_update = data->last_updated +
247 		      msecs_to_jiffies(data->update_interval);
248 	if (time_after(jiffies, next_update) || !data->valid) {
249 		if (data->kind != tmp432) {
250 			/*
251 			 * The driver uses the TMP432 status format internally.
252 			 * Convert status to TMP432 format for other chips.
253 			 */
254 			val = i2c_smbus_read_byte_data(client, TMP401_STATUS);
255 			if (val < 0) {
256 				ret = ERR_PTR(val);
257 				goto abort;
258 			}
259 			data->status[0] =
260 			  (val & TMP401_STATUS_REMOTE_OPEN) >> 1;
261 			data->status[1] =
262 			  ((val & TMP401_STATUS_REMOTE_LOW) >> 2) |
263 			  ((val & TMP401_STATUS_LOCAL_LOW) >> 5);
264 			data->status[2] =
265 			  ((val & TMP401_STATUS_REMOTE_HIGH) >> 3) |
266 			  ((val & TMP401_STATUS_LOCAL_HIGH) >> 6);
267 			data->status[3] = val & (TMP401_STATUS_LOCAL_CRIT
268 						| TMP401_STATUS_REMOTE_CRIT);
269 		} else {
270 			for (i = 0; i < ARRAY_SIZE(data->status); i++) {
271 				val = i2c_smbus_read_byte_data(client,
272 							TMP432_STATUS_REG[i]);
273 				if (val < 0) {
274 					ret = ERR_PTR(val);
275 					goto abort;
276 				}
277 				data->status[i] = val;
278 			}
279 		}
280 
281 		val = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
282 		if (val < 0) {
283 			ret = ERR_PTR(val);
284 			goto abort;
285 		}
286 		data->config = val;
287 		val = tmp401_update_device_reg16(client, data);
288 		if (val < 0) {
289 			ret = ERR_PTR(val);
290 			goto abort;
291 		}
292 		val = i2c_smbus_read_byte_data(client, TMP401_TEMP_CRIT_HYST);
293 		if (val < 0) {
294 			ret = ERR_PTR(val);
295 			goto abort;
296 		}
297 		data->temp_crit_hyst = val;
298 
299 		data->last_updated = jiffies;
300 		data->valid = 1;
301 	}
302 
303 abort:
304 	mutex_unlock(&data->update_lock);
305 	return ret;
306 }
307 
308 static ssize_t show_temp(struct device *dev,
309 			 struct device_attribute *devattr, char *buf)
310 {
311 	int nr = to_sensor_dev_attr_2(devattr)->nr;
312 	int index = to_sensor_dev_attr_2(devattr)->index;
313 	struct tmp401_data *data = tmp401_update_device(dev);
314 
315 	if (IS_ERR(data))
316 		return PTR_ERR(data);
317 
318 	return sprintf(buf, "%d\n",
319 		tmp401_register_to_temp(data->temp[nr][index], data->config));
320 }
321 
322 static ssize_t show_temp_crit_hyst(struct device *dev,
323 	struct device_attribute *devattr, char *buf)
324 {
325 	int temp, index = to_sensor_dev_attr(devattr)->index;
326 	struct tmp401_data *data = tmp401_update_device(dev);
327 
328 	if (IS_ERR(data))
329 		return PTR_ERR(data);
330 
331 	mutex_lock(&data->update_lock);
332 	temp = tmp401_register_to_temp(data->temp[3][index], data->config);
333 	temp -= data->temp_crit_hyst * 1000;
334 	mutex_unlock(&data->update_lock);
335 
336 	return sprintf(buf, "%d\n", temp);
337 }
338 
339 static ssize_t show_status(struct device *dev,
340 	struct device_attribute *devattr, char *buf)
341 {
342 	int nr = to_sensor_dev_attr_2(devattr)->nr;
343 	int mask = to_sensor_dev_attr_2(devattr)->index;
344 	struct tmp401_data *data = tmp401_update_device(dev);
345 
346 	if (IS_ERR(data))
347 		return PTR_ERR(data);
348 
349 	return sprintf(buf, "%d\n", !!(data->status[nr] & mask));
350 }
351 
352 static ssize_t store_temp(struct device *dev, struct device_attribute *devattr,
353 			  const char *buf, size_t count)
354 {
355 	int nr = to_sensor_dev_attr_2(devattr)->nr;
356 	int index = to_sensor_dev_attr_2(devattr)->index;
357 	struct tmp401_data *data = dev_get_drvdata(dev);
358 	struct i2c_client *client = data->client;
359 	long val;
360 	u16 reg;
361 	u8 regaddr;
362 
363 	if (kstrtol(buf, 10, &val))
364 		return -EINVAL;
365 
366 	reg = tmp401_temp_to_register(val, data->config, nr == 3 ? 8 : 4);
367 
368 	mutex_lock(&data->update_lock);
369 
370 	regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index]
371 				       : TMP401_TEMP_MSB_WRITE[nr][index];
372 	i2c_smbus_write_byte_data(client, regaddr, reg >> 8);
373 	if (nr != 3) {
374 		regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index]
375 					       : TMP401_TEMP_LSB[nr][index];
376 		i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF);
377 	}
378 	data->temp[nr][index] = reg;
379 
380 	mutex_unlock(&data->update_lock);
381 
382 	return count;
383 }
384 
385 static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
386 	*devattr, const char *buf, size_t count)
387 {
388 	int temp, index = to_sensor_dev_attr(devattr)->index;
389 	struct tmp401_data *data = tmp401_update_device(dev);
390 	long val;
391 	u8 reg;
392 
393 	if (IS_ERR(data))
394 		return PTR_ERR(data);
395 
396 	if (kstrtol(buf, 10, &val))
397 		return -EINVAL;
398 
399 	if (data->config & TMP401_CONFIG_RANGE)
400 		val = clamp_val(val, -64000, 191000);
401 	else
402 		val = clamp_val(val, 0, 127000);
403 
404 	mutex_lock(&data->update_lock);
405 	temp = tmp401_register_to_temp(data->temp[3][index], data->config);
406 	val = clamp_val(val, temp - 255000, temp);
407 	reg = ((temp - val) + 500) / 1000;
408 
409 	i2c_smbus_write_byte_data(data->client, TMP401_TEMP_CRIT_HYST,
410 				  reg);
411 
412 	data->temp_crit_hyst = reg;
413 
414 	mutex_unlock(&data->update_lock);
415 
416 	return count;
417 }
418 
419 /*
420  * Resets the historical measurements of minimum and maximum temperatures.
421  * This is done by writing any value to any of the minimum/maximum registers
422  * (0x30-0x37).
423  */
424 static ssize_t reset_temp_history(struct device *dev,
425 	struct device_attribute	*devattr, const char *buf, size_t count)
426 {
427 	struct tmp401_data *data = dev_get_drvdata(dev);
428 	struct i2c_client *client = data->client;
429 	long val;
430 
431 	if (kstrtol(buf, 10, &val))
432 		return -EINVAL;
433 
434 	if (val != 1) {
435 		dev_err(dev,
436 			"temp_reset_history value %ld not supported. Use 1 to reset the history!\n",
437 			val);
438 		return -EINVAL;
439 	}
440 	mutex_lock(&data->update_lock);
441 	i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val);
442 	data->valid = 0;
443 	mutex_unlock(&data->update_lock);
444 
445 	return count;
446 }
447 
448 static ssize_t show_update_interval(struct device *dev,
449 				    struct device_attribute *attr, char *buf)
450 {
451 	struct tmp401_data *data = dev_get_drvdata(dev);
452 
453 	return sprintf(buf, "%u\n", data->update_interval);
454 }
455 
456 static ssize_t set_update_interval(struct device *dev,
457 				   struct device_attribute *attr,
458 				   const char *buf, size_t count)
459 {
460 	struct tmp401_data *data = dev_get_drvdata(dev);
461 	struct i2c_client *client = data->client;
462 	unsigned long val;
463 	int err, rate;
464 
465 	err = kstrtoul(buf, 10, &val);
466 	if (err)
467 		return err;
468 
469 	/*
470 	 * For valid rates, interval can be calculated as
471 	 *	interval = (1 << (7 - rate)) * 125;
472 	 * Rounded rate is therefore
473 	 *	rate = 7 - __fls(interval * 4 / (125 * 3));
474 	 * Use clamp_val() to avoid overflows, and to ensure valid input
475 	 * for __fls.
476 	 */
477 	val = clamp_val(val, 125, 16000);
478 	rate = 7 - __fls(val * 4 / (125 * 3));
479 	mutex_lock(&data->update_lock);
480 	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, rate);
481 	data->update_interval = (1 << (7 - rate)) * 125;
482 	mutex_unlock(&data->update_lock);
483 
484 	return count;
485 }
486 
487 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
488 static SENSOR_DEVICE_ATTR_2(temp1_min, S_IWUSR | S_IRUGO, show_temp,
489 			    store_temp, 1, 0);
490 static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp,
491 			    store_temp, 2, 0);
492 static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IWUSR | S_IRUGO, show_temp,
493 			    store_temp, 3, 0);
494 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
495 			  show_temp_crit_hyst, store_temp_crit_hyst, 0);
496 static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_status, NULL,
497 			    1, TMP432_STATUS_LOCAL);
498 static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_status, NULL,
499 			    2, TMP432_STATUS_LOCAL);
500 static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_status, NULL,
501 			    3, TMP432_STATUS_LOCAL);
502 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
503 static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp,
504 			    store_temp, 1, 1);
505 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp,
506 			    store_temp, 2, 1);
507 static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IWUSR | S_IRUGO, show_temp,
508 			    store_temp, 3, 1);
509 static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst,
510 			  NULL, 1);
511 static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_status, NULL,
512 			    0, TMP432_STATUS_REMOTE1);
513 static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_status, NULL,
514 			    1, TMP432_STATUS_REMOTE1);
515 static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_status, NULL,
516 			    2, TMP432_STATUS_REMOTE1);
517 static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_status, NULL,
518 			    3, TMP432_STATUS_REMOTE1);
519 
520 static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
521 		   set_update_interval);
522 
523 static struct attribute *tmp401_attributes[] = {
524 	&sensor_dev_attr_temp1_input.dev_attr.attr,
525 	&sensor_dev_attr_temp1_min.dev_attr.attr,
526 	&sensor_dev_attr_temp1_max.dev_attr.attr,
527 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
528 	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
529 	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
530 	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
531 	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
532 
533 	&sensor_dev_attr_temp2_input.dev_attr.attr,
534 	&sensor_dev_attr_temp2_min.dev_attr.attr,
535 	&sensor_dev_attr_temp2_max.dev_attr.attr,
536 	&sensor_dev_attr_temp2_crit.dev_attr.attr,
537 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
538 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
539 	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
540 	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
541 	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
542 
543 	&dev_attr_update_interval.attr,
544 
545 	NULL
546 };
547 
548 static const struct attribute_group tmp401_group = {
549 	.attrs = tmp401_attributes,
550 };
551 
552 /*
553  * Additional features of the TMP411 chip.
554  * The TMP411 stores the minimum and maximum
555  * temperature measured since power-on, chip-reset, or
556  * minimum and maximum register reset for both the local
557  * and remote channels.
558  */
559 static SENSOR_DEVICE_ATTR_2(temp1_lowest, S_IRUGO, show_temp, NULL, 4, 0);
560 static SENSOR_DEVICE_ATTR_2(temp1_highest, S_IRUGO, show_temp, NULL, 5, 0);
561 static SENSOR_DEVICE_ATTR_2(temp2_lowest, S_IRUGO, show_temp, NULL, 4, 1);
562 static SENSOR_DEVICE_ATTR_2(temp2_highest, S_IRUGO, show_temp, NULL, 5, 1);
563 static SENSOR_DEVICE_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history,
564 			  0);
565 
566 static struct attribute *tmp411_attributes[] = {
567 	&sensor_dev_attr_temp1_highest.dev_attr.attr,
568 	&sensor_dev_attr_temp1_lowest.dev_attr.attr,
569 	&sensor_dev_attr_temp2_highest.dev_attr.attr,
570 	&sensor_dev_attr_temp2_lowest.dev_attr.attr,
571 	&sensor_dev_attr_temp_reset_history.dev_attr.attr,
572 	NULL
573 };
574 
575 static const struct attribute_group tmp411_group = {
576 	.attrs = tmp411_attributes,
577 };
578 
579 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2);
580 static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp,
581 			    store_temp, 1, 2);
582 static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp,
583 			    store_temp, 2, 2);
584 static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
585 			    store_temp, 3, 2);
586 static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst,
587 			  NULL, 2);
588 static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_status, NULL,
589 			    0, TMP432_STATUS_REMOTE2);
590 static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_status, NULL,
591 			    1, TMP432_STATUS_REMOTE2);
592 static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_status, NULL,
593 			    2, TMP432_STATUS_REMOTE2);
594 static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_status, NULL,
595 			    3, TMP432_STATUS_REMOTE2);
596 
597 static struct attribute *tmp432_attributes[] = {
598 	&sensor_dev_attr_temp3_input.dev_attr.attr,
599 	&sensor_dev_attr_temp3_min.dev_attr.attr,
600 	&sensor_dev_attr_temp3_max.dev_attr.attr,
601 	&sensor_dev_attr_temp3_crit.dev_attr.attr,
602 	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
603 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
604 	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
605 	&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
606 	&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
607 
608 	NULL
609 };
610 
611 static const struct attribute_group tmp432_group = {
612 	.attrs = tmp432_attributes,
613 };
614 
615 /*
616  * Begin non sysfs callback code (aka Real code)
617  */
618 
619 static int tmp401_init_client(struct tmp401_data *data,
620 			      struct i2c_client *client)
621 {
622 	int config, config_orig, status = 0;
623 
624 	/* Set the conversion rate to 2 Hz */
625 	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
626 	data->update_interval = 500;
627 
628 	/* Start conversions (disable shutdown if necessary) */
629 	config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
630 	if (config < 0)
631 		return config;
632 
633 	config_orig = config;
634 	config &= ~TMP401_CONFIG_SHUTDOWN;
635 
636 	if (config != config_orig)
637 		status = i2c_smbus_write_byte_data(client,
638 						   TMP401_CONFIG_WRITE,
639 						   config);
640 
641 	return status;
642 }
643 
644 static int tmp401_detect(struct i2c_client *client,
645 			 struct i2c_board_info *info)
646 {
647 	enum chips kind;
648 	struct i2c_adapter *adapter = client->adapter;
649 	u8 reg;
650 
651 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
652 		return -ENODEV;
653 
654 	/* Detect and identify the chip */
655 	reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
656 	if (reg != TMP401_MANUFACTURER_ID)
657 		return -ENODEV;
658 
659 	reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
660 
661 	switch (reg) {
662 	case TMP401_DEVICE_ID:
663 		if (client->addr != 0x4c)
664 			return -ENODEV;
665 		kind = tmp401;
666 		break;
667 	case TMP411A_DEVICE_ID:
668 		if (client->addr != 0x4c)
669 			return -ENODEV;
670 		kind = tmp411;
671 		break;
672 	case TMP411B_DEVICE_ID:
673 		if (client->addr != 0x4d)
674 			return -ENODEV;
675 		kind = tmp411;
676 		break;
677 	case TMP411C_DEVICE_ID:
678 		if (client->addr != 0x4e)
679 			return -ENODEV;
680 		kind = tmp411;
681 		break;
682 	case TMP431_DEVICE_ID:
683 		if (client->addr != 0x4c && client->addr != 0x4d)
684 			return -ENODEV;
685 		kind = tmp431;
686 		break;
687 	case TMP432_DEVICE_ID:
688 		if (client->addr != 0x4c && client->addr != 0x4d)
689 			return -ENODEV;
690 		kind = tmp432;
691 		break;
692 	case TMP435_DEVICE_ID:
693 		kind = tmp435;
694 		break;
695 	default:
696 		return -ENODEV;
697 	}
698 
699 	reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
700 	if (reg & 0x1b)
701 		return -ENODEV;
702 
703 	reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
704 	/* Datasheet says: 0x1-0x6 */
705 	if (reg > 15)
706 		return -ENODEV;
707 
708 	strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
709 
710 	return 0;
711 }
712 
713 static int tmp401_probe(struct i2c_client *client,
714 			const struct i2c_device_id *id)
715 {
716 	static const char * const names[] = {
717 		"TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
718 	};
719 	struct device *dev = &client->dev;
720 	struct device *hwmon_dev;
721 	struct tmp401_data *data;
722 	int groups = 0, status;
723 
724 	data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
725 	if (!data)
726 		return -ENOMEM;
727 
728 	data->client = client;
729 	mutex_init(&data->update_lock);
730 	data->kind = id->driver_data;
731 
732 	/* Initialize the TMP401 chip */
733 	status = tmp401_init_client(data, client);
734 	if (status < 0)
735 		return status;
736 
737 	/* Register sysfs hooks */
738 	data->groups[groups++] = &tmp401_group;
739 
740 	/* Register additional tmp411 sysfs hooks */
741 	if (data->kind == tmp411)
742 		data->groups[groups++] = &tmp411_group;
743 
744 	/* Register additional tmp432 sysfs hooks */
745 	if (data->kind == tmp432)
746 		data->groups[groups++] = &tmp432_group;
747 
748 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
749 							   data, data->groups);
750 	if (IS_ERR(hwmon_dev))
751 		return PTR_ERR(hwmon_dev);
752 
753 	dev_info(dev, "Detected TI %s chip\n", names[data->kind]);
754 
755 	return 0;
756 }
757 
758 static struct i2c_driver tmp401_driver = {
759 	.class		= I2C_CLASS_HWMON,
760 	.driver = {
761 		.name	= "tmp401",
762 	},
763 	.probe		= tmp401_probe,
764 	.id_table	= tmp401_id,
765 	.detect		= tmp401_detect,
766 	.address_list	= normal_i2c,
767 };
768 
769 module_i2c_driver(tmp401_driver);
770 
771 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
772 MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
773 MODULE_LICENSE("GPL");
774