xref: /linux/drivers/hwmon/tmp401.c (revision 148f9bb87745ed45f7a11b2cbd3bc0f017d5d257)
1 /* tmp401.c
2  *
3  * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
4  * Preliminary tmp411 support by:
5  * Gabriel Konat, Sander Leget, Wouter Willems
6  * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
7  *
8  * Cleanup and support for TMP431 and TMP432 by Guenter Roeck
9  * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24  */
25 
26 /*
27  * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
28  *
29  * Note this IC is in some aspect similar to the LM90, but it has quite a
30  * few differences too, for example the local temp has a higher resolution
31  * and thus has 16 bits registers for its value and limit instead of 8 bits.
32  */
33 
34 #include <linux/module.h>
35 #include <linux/init.h>
36 #include <linux/bitops.h>
37 #include <linux/slab.h>
38 #include <linux/jiffies.h>
39 #include <linux/i2c.h>
40 #include <linux/hwmon.h>
41 #include <linux/hwmon-sysfs.h>
42 #include <linux/err.h>
43 #include <linux/mutex.h>
44 #include <linux/sysfs.h>
45 
46 /* Addresses to scan */
47 static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
48 
49 enum chips { tmp401, tmp411, tmp431, tmp432 };
50 
51 /*
52  * The TMP401 registers, note some registers have different addresses for
53  * reading and writing
54  */
55 #define TMP401_STATUS				0x02
56 #define TMP401_CONFIG_READ			0x03
57 #define TMP401_CONFIG_WRITE			0x09
58 #define TMP401_CONVERSION_RATE_READ		0x04
59 #define TMP401_CONVERSION_RATE_WRITE		0x0A
60 #define TMP401_TEMP_CRIT_HYST			0x21
61 #define TMP401_MANUFACTURER_ID_REG		0xFE
62 #define TMP401_DEVICE_ID_REG			0xFF
63 
64 static const u8 TMP401_TEMP_MSB_READ[6][2] = {
65 	{ 0x00, 0x01 },	/* temp */
66 	{ 0x06, 0x08 },	/* low limit */
67 	{ 0x05, 0x07 },	/* high limit */
68 	{ 0x20, 0x19 },	/* therm (crit) limit */
69 	{ 0x30, 0x34 },	/* lowest */
70 	{ 0x32, 0x36 },	/* highest */
71 };
72 
73 static const u8 TMP401_TEMP_MSB_WRITE[6][2] = {
74 	{ 0, 0 },	/* temp (unused) */
75 	{ 0x0C, 0x0E },	/* low limit */
76 	{ 0x0B, 0x0D },	/* high limit */
77 	{ 0x20, 0x19 },	/* therm (crit) limit */
78 	{ 0x30, 0x34 },	/* lowest */
79 	{ 0x32, 0x36 },	/* highest */
80 };
81 
82 static const u8 TMP401_TEMP_LSB[6][2] = {
83 	{ 0x15, 0x10 },	/* temp */
84 	{ 0x17, 0x14 },	/* low limit */
85 	{ 0x16, 0x13 },	/* high limit */
86 	{ 0, 0 },	/* therm (crit) limit (unused) */
87 	{ 0x31, 0x35 },	/* lowest */
88 	{ 0x33, 0x37 },	/* highest */
89 };
90 
91 static const u8 TMP432_TEMP_MSB_READ[4][3] = {
92 	{ 0x00, 0x01, 0x23 },	/* temp */
93 	{ 0x06, 0x08, 0x16 },	/* low limit */
94 	{ 0x05, 0x07, 0x15 },	/* high limit */
95 	{ 0x20, 0x19, 0x1A },	/* therm (crit) limit */
96 };
97 
98 static const u8 TMP432_TEMP_MSB_WRITE[4][3] = {
99 	{ 0, 0, 0 },		/* temp  - unused */
100 	{ 0x0C, 0x0E, 0x16 },	/* low limit */
101 	{ 0x0B, 0x0D, 0x15 },	/* high limit */
102 	{ 0x20, 0x19, 0x1A },	/* therm (crit) limit */
103 };
104 
105 static const u8 TMP432_TEMP_LSB[3][3] = {
106 	{ 0x29, 0x10, 0x24 },	/* temp */
107 	{ 0x3E, 0x14, 0x18 },	/* low limit */
108 	{ 0x3D, 0x13, 0x17 },	/* high limit */
109 };
110 
111 /* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
112 static const u8 TMP432_STATUS_REG[] = {
113 	0x1b, 0x36, 0x35, 0x37 };
114 
115 /* Flags */
116 #define TMP401_CONFIG_RANGE			BIT(2)
117 #define TMP401_CONFIG_SHUTDOWN			BIT(6)
118 #define TMP401_STATUS_LOCAL_CRIT		BIT(0)
119 #define TMP401_STATUS_REMOTE_CRIT		BIT(1)
120 #define TMP401_STATUS_REMOTE_OPEN		BIT(2)
121 #define TMP401_STATUS_REMOTE_LOW		BIT(3)
122 #define TMP401_STATUS_REMOTE_HIGH		BIT(4)
123 #define TMP401_STATUS_LOCAL_LOW			BIT(5)
124 #define TMP401_STATUS_LOCAL_HIGH		BIT(6)
125 
126 /* On TMP432, each status has its own register */
127 #define TMP432_STATUS_LOCAL			BIT(0)
128 #define TMP432_STATUS_REMOTE1			BIT(1)
129 #define TMP432_STATUS_REMOTE2			BIT(2)
130 
131 /* Manufacturer / Device ID's */
132 #define TMP401_MANUFACTURER_ID			0x55
133 #define TMP401_DEVICE_ID			0x11
134 #define TMP411A_DEVICE_ID			0x12
135 #define TMP411B_DEVICE_ID			0x13
136 #define TMP411C_DEVICE_ID			0x10
137 #define TMP431_DEVICE_ID			0x31
138 #define TMP432_DEVICE_ID			0x32
139 
140 /*
141  * Driver data (common to all clients)
142  */
143 
144 static const struct i2c_device_id tmp401_id[] = {
145 	{ "tmp401", tmp401 },
146 	{ "tmp411", tmp411 },
147 	{ "tmp431", tmp431 },
148 	{ "tmp432", tmp432 },
149 	{ }
150 };
151 MODULE_DEVICE_TABLE(i2c, tmp401_id);
152 
153 /*
154  * Client data (each client gets its own)
155  */
156 
157 struct tmp401_data {
158 	struct device *hwmon_dev;
159 	struct mutex update_lock;
160 	char valid; /* zero until following fields are valid */
161 	unsigned long last_updated; /* in jiffies */
162 	enum chips kind;
163 
164 	unsigned int update_interval;	/* in milliseconds */
165 
166 	/* register values */
167 	u8 status[4];
168 	u8 config;
169 	u16 temp[6][3];
170 	u8 temp_crit_hyst;
171 };
172 
173 /*
174  * Sysfs attr show / store functions
175  */
176 
177 static int tmp401_register_to_temp(u16 reg, u8 config)
178 {
179 	int temp = reg;
180 
181 	if (config & TMP401_CONFIG_RANGE)
182 		temp -= 64 * 256;
183 
184 	return DIV_ROUND_CLOSEST(temp * 125, 32);
185 }
186 
187 static u16 tmp401_temp_to_register(long temp, u8 config, int zbits)
188 {
189 	if (config & TMP401_CONFIG_RANGE) {
190 		temp = clamp_val(temp, -64000, 191000);
191 		temp += 64000;
192 	} else
193 		temp = clamp_val(temp, 0, 127000);
194 
195 	return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
196 }
197 
198 static int tmp401_update_device_reg16(struct i2c_client *client,
199 				      struct tmp401_data *data)
200 {
201 	int i, j, val;
202 	int num_regs = data->kind == tmp411 ? 6 : 4;
203 	int num_sensors = data->kind == tmp432 ? 3 : 2;
204 
205 	for (i = 0; i < num_sensors; i++) {		/* local / r1 / r2 */
206 		for (j = 0; j < num_regs; j++) {	/* temp / low / ... */
207 			u8 regaddr;
208 			/*
209 			 * High byte must be read first immediately followed
210 			 * by the low byte
211 			 */
212 			regaddr = data->kind == tmp432 ?
213 						TMP432_TEMP_MSB_READ[j][i] :
214 						TMP401_TEMP_MSB_READ[j][i];
215 			val = i2c_smbus_read_byte_data(client, regaddr);
216 			if (val < 0)
217 				return val;
218 			data->temp[j][i] = val << 8;
219 			if (j == 3)		/* crit is msb only */
220 				continue;
221 			regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i]
222 						       : TMP401_TEMP_LSB[j][i];
223 			val = i2c_smbus_read_byte_data(client, regaddr);
224 			if (val < 0)
225 				return val;
226 			data->temp[j][i] |= val;
227 		}
228 	}
229 	return 0;
230 }
231 
232 static struct tmp401_data *tmp401_update_device(struct device *dev)
233 {
234 	struct i2c_client *client = to_i2c_client(dev);
235 	struct tmp401_data *data = i2c_get_clientdata(client);
236 	struct tmp401_data *ret = data;
237 	int i, val;
238 	unsigned long next_update;
239 
240 	mutex_lock(&data->update_lock);
241 
242 	next_update = data->last_updated +
243 		      msecs_to_jiffies(data->update_interval);
244 	if (time_after(jiffies, next_update) || !data->valid) {
245 		if (data->kind != tmp432) {
246 			/*
247 			 * The driver uses the TMP432 status format internally.
248 			 * Convert status to TMP432 format for other chips.
249 			 */
250 			val = i2c_smbus_read_byte_data(client, TMP401_STATUS);
251 			if (val < 0) {
252 				ret = ERR_PTR(val);
253 				goto abort;
254 			}
255 			data->status[0] =
256 			  (val & TMP401_STATUS_REMOTE_OPEN) >> 1;
257 			data->status[1] =
258 			  ((val & TMP401_STATUS_REMOTE_LOW) >> 2) |
259 			  ((val & TMP401_STATUS_LOCAL_LOW) >> 5);
260 			data->status[2] =
261 			  ((val & TMP401_STATUS_REMOTE_HIGH) >> 3) |
262 			  ((val & TMP401_STATUS_LOCAL_HIGH) >> 6);
263 			data->status[3] = val & (TMP401_STATUS_LOCAL_CRIT
264 						| TMP401_STATUS_REMOTE_CRIT);
265 		} else {
266 			for (i = 0; i < ARRAY_SIZE(data->status); i++) {
267 				val = i2c_smbus_read_byte_data(client,
268 							TMP432_STATUS_REG[i]);
269 				if (val < 0) {
270 					ret = ERR_PTR(val);
271 					goto abort;
272 				}
273 				data->status[i] = val;
274 			}
275 		}
276 
277 		val = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
278 		if (val < 0) {
279 			ret = ERR_PTR(val);
280 			goto abort;
281 		}
282 		data->config = val;
283 		val = tmp401_update_device_reg16(client, data);
284 		if (val < 0) {
285 			ret = ERR_PTR(val);
286 			goto abort;
287 		}
288 		val = i2c_smbus_read_byte_data(client, TMP401_TEMP_CRIT_HYST);
289 		if (val < 0) {
290 			ret = ERR_PTR(val);
291 			goto abort;
292 		}
293 		data->temp_crit_hyst = val;
294 
295 		data->last_updated = jiffies;
296 		data->valid = 1;
297 	}
298 
299 abort:
300 	mutex_unlock(&data->update_lock);
301 	return ret;
302 }
303 
304 static ssize_t show_temp(struct device *dev,
305 			 struct device_attribute *devattr, char *buf)
306 {
307 	int nr = to_sensor_dev_attr_2(devattr)->nr;
308 	int index = to_sensor_dev_attr_2(devattr)->index;
309 	struct tmp401_data *data = tmp401_update_device(dev);
310 
311 	if (IS_ERR(data))
312 		return PTR_ERR(data);
313 
314 	return sprintf(buf, "%d\n",
315 		tmp401_register_to_temp(data->temp[nr][index], data->config));
316 }
317 
318 static ssize_t show_temp_crit_hyst(struct device *dev,
319 	struct device_attribute *devattr, char *buf)
320 {
321 	int temp, index = to_sensor_dev_attr(devattr)->index;
322 	struct tmp401_data *data = tmp401_update_device(dev);
323 
324 	if (IS_ERR(data))
325 		return PTR_ERR(data);
326 
327 	mutex_lock(&data->update_lock);
328 	temp = tmp401_register_to_temp(data->temp[3][index], data->config);
329 	temp -= data->temp_crit_hyst * 1000;
330 	mutex_unlock(&data->update_lock);
331 
332 	return sprintf(buf, "%d\n", temp);
333 }
334 
335 static ssize_t show_status(struct device *dev,
336 	struct device_attribute *devattr, char *buf)
337 {
338 	int nr = to_sensor_dev_attr_2(devattr)->nr;
339 	int mask = to_sensor_dev_attr_2(devattr)->index;
340 	struct tmp401_data *data = tmp401_update_device(dev);
341 
342 	if (IS_ERR(data))
343 		return PTR_ERR(data);
344 
345 	return sprintf(buf, "%d\n", !!(data->status[nr] & mask));
346 }
347 
348 static ssize_t store_temp(struct device *dev, struct device_attribute *devattr,
349 			  const char *buf, size_t count)
350 {
351 	int nr = to_sensor_dev_attr_2(devattr)->nr;
352 	int index = to_sensor_dev_attr_2(devattr)->index;
353 	struct i2c_client *client = to_i2c_client(dev);
354 	struct tmp401_data *data = tmp401_update_device(dev);
355 	long val;
356 	u16 reg;
357 	u8 regaddr;
358 
359 	if (IS_ERR(data))
360 		return PTR_ERR(data);
361 
362 	if (kstrtol(buf, 10, &val))
363 		return -EINVAL;
364 
365 	reg = tmp401_temp_to_register(val, data->config, nr == 3 ? 8 : 4);
366 
367 	mutex_lock(&data->update_lock);
368 
369 	regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index]
370 				       : TMP401_TEMP_MSB_WRITE[nr][index];
371 	i2c_smbus_write_byte_data(client, regaddr, reg >> 8);
372 	if (nr != 3) {
373 		regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index]
374 					       : TMP401_TEMP_LSB[nr][index];
375 		i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF);
376 	}
377 	data->temp[nr][index] = reg;
378 
379 	mutex_unlock(&data->update_lock);
380 
381 	return count;
382 }
383 
384 static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
385 	*devattr, const char *buf, size_t count)
386 {
387 	int temp, index = to_sensor_dev_attr(devattr)->index;
388 	struct tmp401_data *data = tmp401_update_device(dev);
389 	long val;
390 	u8 reg;
391 
392 	if (IS_ERR(data))
393 		return PTR_ERR(data);
394 
395 	if (kstrtol(buf, 10, &val))
396 		return -EINVAL;
397 
398 	if (data->config & TMP401_CONFIG_RANGE)
399 		val = clamp_val(val, -64000, 191000);
400 	else
401 		val = clamp_val(val, 0, 127000);
402 
403 	mutex_lock(&data->update_lock);
404 	temp = tmp401_register_to_temp(data->temp[3][index], data->config);
405 	val = clamp_val(val, temp - 255000, temp);
406 	reg = ((temp - val) + 500) / 1000;
407 
408 	i2c_smbus_write_byte_data(to_i2c_client(dev), TMP401_TEMP_CRIT_HYST,
409 				  reg);
410 
411 	data->temp_crit_hyst = reg;
412 
413 	mutex_unlock(&data->update_lock);
414 
415 	return count;
416 }
417 
418 /*
419  * Resets the historical measurements of minimum and maximum temperatures.
420  * This is done by writing any value to any of the minimum/maximum registers
421  * (0x30-0x37).
422  */
423 static ssize_t reset_temp_history(struct device *dev,
424 	struct device_attribute	*devattr, const char *buf, size_t count)
425 {
426 	struct i2c_client *client = to_i2c_client(dev);
427 	struct tmp401_data *data = i2c_get_clientdata(client);
428 	long val;
429 
430 	if (kstrtol(buf, 10, &val))
431 		return -EINVAL;
432 
433 	if (val != 1) {
434 		dev_err(dev,
435 			"temp_reset_history value %ld not supported. Use 1 to reset the history!\n",
436 			val);
437 		return -EINVAL;
438 	}
439 	mutex_lock(&data->update_lock);
440 	i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val);
441 	data->valid = 0;
442 	mutex_unlock(&data->update_lock);
443 
444 	return count;
445 }
446 
447 static ssize_t show_update_interval(struct device *dev,
448 				    struct device_attribute *attr, char *buf)
449 {
450 	struct i2c_client *client = to_i2c_client(dev);
451 	struct tmp401_data *data = i2c_get_clientdata(client);
452 
453 	return sprintf(buf, "%u\n", data->update_interval);
454 }
455 
456 static ssize_t set_update_interval(struct device *dev,
457 				   struct device_attribute *attr,
458 				   const char *buf, size_t count)
459 {
460 	struct i2c_client *client = to_i2c_client(dev);
461 	struct tmp401_data *data = i2c_get_clientdata(client);
462 	unsigned long val;
463 	int err, rate;
464 
465 	err = kstrtoul(buf, 10, &val);
466 	if (err)
467 		return err;
468 
469 	/*
470 	 * For valid rates, interval can be calculated as
471 	 *	interval = (1 << (7 - rate)) * 125;
472 	 * Rounded rate is therefore
473 	 *	rate = 7 - __fls(interval * 4 / (125 * 3));
474 	 * Use clamp_val() to avoid overflows, and to ensure valid input
475 	 * for __fls.
476 	 */
477 	val = clamp_val(val, 125, 16000);
478 	rate = 7 - __fls(val * 4 / (125 * 3));
479 	mutex_lock(&data->update_lock);
480 	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, rate);
481 	data->update_interval = (1 << (7 - rate)) * 125;
482 	mutex_unlock(&data->update_lock);
483 
484 	return count;
485 }
486 
487 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
488 static SENSOR_DEVICE_ATTR_2(temp1_min, S_IWUSR | S_IRUGO, show_temp,
489 			    store_temp, 1, 0);
490 static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp,
491 			    store_temp, 2, 0);
492 static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IWUSR | S_IRUGO, show_temp,
493 			    store_temp, 3, 0);
494 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
495 			  show_temp_crit_hyst, store_temp_crit_hyst, 0);
496 static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_status, NULL,
497 			    1, TMP432_STATUS_LOCAL);
498 static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_status, NULL,
499 			    2, TMP432_STATUS_LOCAL);
500 static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_status, NULL,
501 			    3, TMP432_STATUS_LOCAL);
502 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
503 static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp,
504 			    store_temp, 1, 1);
505 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp,
506 			    store_temp, 2, 1);
507 static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IWUSR | S_IRUGO, show_temp,
508 			    store_temp, 3, 1);
509 static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst,
510 			  NULL, 1);
511 static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_status, NULL,
512 			    0, TMP432_STATUS_REMOTE1);
513 static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_status, NULL,
514 			    1, TMP432_STATUS_REMOTE1);
515 static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_status, NULL,
516 			    2, TMP432_STATUS_REMOTE1);
517 static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_status, NULL,
518 			    3, TMP432_STATUS_REMOTE1);
519 
520 static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
521 		   set_update_interval);
522 
523 static struct attribute *tmp401_attributes[] = {
524 	&sensor_dev_attr_temp1_input.dev_attr.attr,
525 	&sensor_dev_attr_temp1_min.dev_attr.attr,
526 	&sensor_dev_attr_temp1_max.dev_attr.attr,
527 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
528 	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
529 	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
530 	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
531 	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
532 
533 	&sensor_dev_attr_temp2_input.dev_attr.attr,
534 	&sensor_dev_attr_temp2_min.dev_attr.attr,
535 	&sensor_dev_attr_temp2_max.dev_attr.attr,
536 	&sensor_dev_attr_temp2_crit.dev_attr.attr,
537 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
538 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
539 	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
540 	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
541 	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
542 
543 	&dev_attr_update_interval.attr,
544 
545 	NULL
546 };
547 
548 static const struct attribute_group tmp401_group = {
549 	.attrs = tmp401_attributes,
550 };
551 
552 /*
553  * Additional features of the TMP411 chip.
554  * The TMP411 stores the minimum and maximum
555  * temperature measured since power-on, chip-reset, or
556  * minimum and maximum register reset for both the local
557  * and remote channels.
558  */
559 static SENSOR_DEVICE_ATTR_2(temp1_lowest, S_IRUGO, show_temp, NULL, 4, 0);
560 static SENSOR_DEVICE_ATTR_2(temp1_highest, S_IRUGO, show_temp, NULL, 5, 0);
561 static SENSOR_DEVICE_ATTR_2(temp2_lowest, S_IRUGO, show_temp, NULL, 4, 1);
562 static SENSOR_DEVICE_ATTR_2(temp2_highest, S_IRUGO, show_temp, NULL, 5, 1);
563 static SENSOR_DEVICE_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history,
564 			  0);
565 
566 static struct attribute *tmp411_attributes[] = {
567 	&sensor_dev_attr_temp1_highest.dev_attr.attr,
568 	&sensor_dev_attr_temp1_lowest.dev_attr.attr,
569 	&sensor_dev_attr_temp2_highest.dev_attr.attr,
570 	&sensor_dev_attr_temp2_lowest.dev_attr.attr,
571 	&sensor_dev_attr_temp_reset_history.dev_attr.attr,
572 	NULL
573 };
574 
575 static const struct attribute_group tmp411_group = {
576 	.attrs = tmp411_attributes,
577 };
578 
579 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2);
580 static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp,
581 			    store_temp, 1, 2);
582 static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp,
583 			    store_temp, 2, 2);
584 static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
585 			    store_temp, 3, 2);
586 static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst,
587 			  NULL, 2);
588 static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_status, NULL,
589 			    0, TMP432_STATUS_REMOTE2);
590 static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_status, NULL,
591 			    1, TMP432_STATUS_REMOTE2);
592 static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_status, NULL,
593 			    2, TMP432_STATUS_REMOTE2);
594 static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_status, NULL,
595 			    3, TMP432_STATUS_REMOTE2);
596 
597 static struct attribute *tmp432_attributes[] = {
598 	&sensor_dev_attr_temp3_input.dev_attr.attr,
599 	&sensor_dev_attr_temp3_min.dev_attr.attr,
600 	&sensor_dev_attr_temp3_max.dev_attr.attr,
601 	&sensor_dev_attr_temp3_crit.dev_attr.attr,
602 	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
603 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
604 	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
605 	&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
606 	&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
607 
608 	NULL
609 };
610 
611 static const struct attribute_group tmp432_group = {
612 	.attrs = tmp432_attributes,
613 };
614 
615 /*
616  * Begin non sysfs callback code (aka Real code)
617  */
618 
619 static void tmp401_init_client(struct i2c_client *client)
620 {
621 	int config, config_orig;
622 	struct tmp401_data *data = i2c_get_clientdata(client);
623 
624 	/* Set the conversion rate to 2 Hz */
625 	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
626 	data->update_interval = 500;
627 
628 	/* Start conversions (disable shutdown if necessary) */
629 	config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
630 	if (config < 0) {
631 		dev_warn(&client->dev, "Initialization failed!\n");
632 		return;
633 	}
634 
635 	config_orig = config;
636 	config &= ~TMP401_CONFIG_SHUTDOWN;
637 
638 	if (config != config_orig)
639 		i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
640 }
641 
642 static int tmp401_detect(struct i2c_client *client,
643 			 struct i2c_board_info *info)
644 {
645 	enum chips kind;
646 	struct i2c_adapter *adapter = client->adapter;
647 	u8 reg;
648 
649 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
650 		return -ENODEV;
651 
652 	/* Detect and identify the chip */
653 	reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
654 	if (reg != TMP401_MANUFACTURER_ID)
655 		return -ENODEV;
656 
657 	reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
658 
659 	switch (reg) {
660 	case TMP401_DEVICE_ID:
661 		if (client->addr != 0x4c)
662 			return -ENODEV;
663 		kind = tmp401;
664 		break;
665 	case TMP411A_DEVICE_ID:
666 		if (client->addr != 0x4c)
667 			return -ENODEV;
668 		kind = tmp411;
669 		break;
670 	case TMP411B_DEVICE_ID:
671 		if (client->addr != 0x4d)
672 			return -ENODEV;
673 		kind = tmp411;
674 		break;
675 	case TMP411C_DEVICE_ID:
676 		if (client->addr != 0x4e)
677 			return -ENODEV;
678 		kind = tmp411;
679 		break;
680 	case TMP431_DEVICE_ID:
681 		if (client->addr == 0x4e)
682 			return -ENODEV;
683 		kind = tmp431;
684 		break;
685 	case TMP432_DEVICE_ID:
686 		if (client->addr == 0x4e)
687 			return -ENODEV;
688 		kind = tmp432;
689 		break;
690 	default:
691 		return -ENODEV;
692 	}
693 
694 	reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
695 	if (reg & 0x1b)
696 		return -ENODEV;
697 
698 	reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
699 	/* Datasheet says: 0x1-0x6 */
700 	if (reg > 15)
701 		return -ENODEV;
702 
703 	strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
704 
705 	return 0;
706 }
707 
708 static int tmp401_remove(struct i2c_client *client)
709 {
710 	struct device *dev = &client->dev;
711 	struct tmp401_data *data = i2c_get_clientdata(client);
712 
713 	if (data->hwmon_dev)
714 		hwmon_device_unregister(data->hwmon_dev);
715 
716 	sysfs_remove_group(&dev->kobj, &tmp401_group);
717 
718 	if (data->kind == tmp411)
719 		sysfs_remove_group(&dev->kobj, &tmp411_group);
720 
721 	if (data->kind == tmp432)
722 		sysfs_remove_group(&dev->kobj, &tmp432_group);
723 
724 	return 0;
725 }
726 
727 static int tmp401_probe(struct i2c_client *client,
728 			const struct i2c_device_id *id)
729 {
730 	struct device *dev = &client->dev;
731 	int err;
732 	struct tmp401_data *data;
733 	const char *names[] = { "TMP401", "TMP411", "TMP431", "TMP432" };
734 
735 	data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
736 	if (!data)
737 		return -ENOMEM;
738 
739 	i2c_set_clientdata(client, data);
740 	mutex_init(&data->update_lock);
741 	data->kind = id->driver_data;
742 
743 	/* Initialize the TMP401 chip */
744 	tmp401_init_client(client);
745 
746 	/* Register sysfs hooks */
747 	err = sysfs_create_group(&dev->kobj, &tmp401_group);
748 	if (err)
749 		return err;
750 
751 	/* Register additional tmp411 sysfs hooks */
752 	if (data->kind == tmp411) {
753 		err = sysfs_create_group(&dev->kobj, &tmp411_group);
754 		if (err)
755 			goto exit_remove;
756 	}
757 
758 	/* Register additional tmp432 sysfs hooks */
759 	if (data->kind == tmp432) {
760 		err = sysfs_create_group(&dev->kobj, &tmp432_group);
761 		if (err)
762 			goto exit_remove;
763 	}
764 
765 	data->hwmon_dev = hwmon_device_register(dev);
766 	if (IS_ERR(data->hwmon_dev)) {
767 		err = PTR_ERR(data->hwmon_dev);
768 		data->hwmon_dev = NULL;
769 		goto exit_remove;
770 	}
771 
772 	dev_info(dev, "Detected TI %s chip\n", names[data->kind]);
773 
774 	return 0;
775 
776 exit_remove:
777 	tmp401_remove(client);
778 	return err;
779 }
780 
781 static struct i2c_driver tmp401_driver = {
782 	.class		= I2C_CLASS_HWMON,
783 	.driver = {
784 		.name	= "tmp401",
785 	},
786 	.probe		= tmp401_probe,
787 	.remove		= tmp401_remove,
788 	.id_table	= tmp401_id,
789 	.detect		= tmp401_detect,
790 	.address_list	= normal_i2c,
791 };
792 
793 module_i2c_driver(tmp401_driver);
794 
795 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
796 MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
797 MODULE_LICENSE("GPL");
798