1 /* 2 * Hardware monitoring driver for PMBus devices 3 * 4 * Copyright (c) 2010, 2011 Ericsson AB. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 19 */ 20 21 #include <linux/kernel.h> 22 #include <linux/module.h> 23 #include <linux/init.h> 24 #include <linux/err.h> 25 #include <linux/slab.h> 26 #include <linux/mutex.h> 27 #include <linux/i2c.h> 28 #include "pmbus.h" 29 30 /* 31 * Find sensor groups and status registers on each page. 32 */ 33 static void pmbus_find_sensor_groups(struct i2c_client *client, 34 struct pmbus_driver_info *info) 35 { 36 int page; 37 38 /* Sensors detected on page 0 only */ 39 if (pmbus_check_word_register(client, 0, PMBUS_READ_VIN)) 40 info->func[0] |= PMBUS_HAVE_VIN; 41 if (pmbus_check_word_register(client, 0, PMBUS_READ_VCAP)) 42 info->func[0] |= PMBUS_HAVE_VCAP; 43 if (pmbus_check_word_register(client, 0, PMBUS_READ_IIN)) 44 info->func[0] |= PMBUS_HAVE_IIN; 45 if (pmbus_check_word_register(client, 0, PMBUS_READ_PIN)) 46 info->func[0] |= PMBUS_HAVE_PIN; 47 if (info->func[0] 48 && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) 49 info->func[0] |= PMBUS_HAVE_STATUS_INPUT; 50 if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && 51 pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { 52 info->func[0] |= PMBUS_HAVE_FAN12; 53 if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) 54 info->func[0] |= PMBUS_HAVE_STATUS_FAN12; 55 } 56 if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) && 57 pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { 58 info->func[0] |= PMBUS_HAVE_FAN34; 59 if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) 60 info->func[0] |= PMBUS_HAVE_STATUS_FAN34; 61 } 62 if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) 63 info->func[0] |= PMBUS_HAVE_TEMP; 64 if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) 65 info->func[0] |= PMBUS_HAVE_TEMP2; 66 if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) 67 info->func[0] |= PMBUS_HAVE_TEMP3; 68 if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 69 | PMBUS_HAVE_TEMP3) 70 && pmbus_check_byte_register(client, 0, 71 PMBUS_STATUS_TEMPERATURE)) 72 info->func[0] |= PMBUS_HAVE_STATUS_TEMP; 73 74 /* Sensors detected on all pages */ 75 for (page = 0; page < info->pages; page++) { 76 if (pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) { 77 info->func[page] |= PMBUS_HAVE_VOUT; 78 if (pmbus_check_byte_register(client, page, 79 PMBUS_STATUS_VOUT)) 80 info->func[page] |= PMBUS_HAVE_STATUS_VOUT; 81 } 82 if (pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) { 83 info->func[page] |= PMBUS_HAVE_IOUT; 84 if (pmbus_check_byte_register(client, 0, 85 PMBUS_STATUS_IOUT)) 86 info->func[page] |= PMBUS_HAVE_STATUS_IOUT; 87 } 88 if (pmbus_check_word_register(client, page, PMBUS_READ_POUT)) 89 info->func[page] |= PMBUS_HAVE_POUT; 90 } 91 } 92 93 /* 94 * Identify chip parameters. 95 */ 96 static int pmbus_identify(struct i2c_client *client, 97 struct pmbus_driver_info *info) 98 { 99 int ret = 0; 100 101 if (!info->pages) { 102 /* 103 * Check if the PAGE command is supported. If it is, 104 * keep setting the page number until it fails or until the 105 * maximum number of pages has been reached. Assume that 106 * this is the number of pages supported by the chip. 107 */ 108 if (pmbus_check_byte_register(client, 0, PMBUS_PAGE)) { 109 int page; 110 111 for (page = 1; page < PMBUS_PAGES; page++) { 112 if (pmbus_set_page(client, page) < 0) 113 break; 114 } 115 pmbus_set_page(client, 0); 116 info->pages = page; 117 } else { 118 info->pages = 1; 119 } 120 } 121 122 if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) { 123 int vout_mode; 124 125 vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); 126 if (vout_mode >= 0 && vout_mode != 0xff) { 127 switch (vout_mode >> 5) { 128 case 0: 129 break; 130 case 1: 131 info->format[PSC_VOLTAGE_OUT] = vid; 132 break; 133 case 2: 134 info->format[PSC_VOLTAGE_OUT] = direct; 135 break; 136 default: 137 ret = -ENODEV; 138 goto abort; 139 } 140 } 141 } 142 143 /* 144 * We should check if the COEFFICIENTS register is supported. 145 * If it is, and the chip is configured for direct mode, we can read 146 * the coefficients from the chip, one set per group of sensor 147 * registers. 148 * 149 * To do this, we will need access to a chip which actually supports the 150 * COEFFICIENTS command, since the command is too complex to implement 151 * without testing it. Until then, abort if a chip configured for direct 152 * mode was detected. 153 */ 154 if (info->format[PSC_VOLTAGE_OUT] == direct) { 155 ret = -ENODEV; 156 goto abort; 157 } 158 159 /* Try to find sensor groups */ 160 pmbus_find_sensor_groups(client, info); 161 abort: 162 return ret; 163 } 164 165 static int pmbus_probe(struct i2c_client *client, 166 const struct i2c_device_id *id) 167 { 168 struct pmbus_driver_info *info; 169 170 info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info), 171 GFP_KERNEL); 172 if (!info) 173 return -ENOMEM; 174 175 info->pages = id->driver_data; 176 info->identify = pmbus_identify; 177 178 return pmbus_do_probe(client, id, info); 179 } 180 181 /* 182 * Use driver_data to set the number of pages supported by the chip. 183 */ 184 static const struct i2c_device_id pmbus_id[] = { 185 {"adp4000", 1}, 186 {"bmr453", 1}, 187 {"bmr454", 1}, 188 {"mdt040", 1}, 189 {"ncp4200", 1}, 190 {"ncp4208", 1}, 191 {"pdt003", 1}, 192 {"pdt006", 1}, 193 {"pdt012", 1}, 194 {"pmbus", 0}, 195 {"tps40400", 1}, 196 {"tps40422", 2}, 197 {"udt020", 1}, 198 {} 199 }; 200 201 MODULE_DEVICE_TABLE(i2c, pmbus_id); 202 203 /* This is the driver that will be inserted */ 204 static struct i2c_driver pmbus_driver = { 205 .driver = { 206 .name = "pmbus", 207 }, 208 .probe = pmbus_probe, 209 .remove = pmbus_do_remove, 210 .id_table = pmbus_id, 211 }; 212 213 module_i2c_driver(pmbus_driver); 214 215 MODULE_AUTHOR("Guenter Roeck"); 216 MODULE_DESCRIPTION("Generic PMBus driver"); 217 MODULE_LICENSE("GPL"); 218