xref: /linux/drivers/hwmon/nct6775-i2c.c (revision 409c38d4f156740bf3165fd6ceae4fa6425eebf4)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * nct6775-i2c - I2C driver for the hardware monitoring functionality of
4  *	         Nuvoton NCT677x Super-I/O chips
5  *
6  * Copyright (C) 2022 Zev Weiss <zev@bewilderbeest.net>
7  *
8  * This driver interacts with the chip via it's "back door" i2c interface, as
9  * is often exposed to a BMC.  Because the host may still be operating the
10  * chip via the ("front door") LPC interface, this driver cannot assume that
11  * it actually has full control of the chip, and in particular must avoid
12  * making any changes that could confuse the host's LPC usage of it.  It thus
13  * operates in a strictly read-only fashion, with the only exception being the
14  * bank-select register (which seems, thankfully, to be replicated for the i2c
15  * interface so it doesn't affect the LPC interface).
16  */
17 
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/i2c.h>
21 #include <linux/hwmon.h>
22 #include <linux/hwmon-sysfs.h>
23 #include <linux/err.h>
24 #include <linux/of.h>
25 #include <linux/regmap.h>
26 #include "nct6775.h"
27 
28 static int nct6775_i2c_read(void *ctx, unsigned int reg, unsigned int *val)
29 {
30 	int ret;
31 	u32 tmp;
32 	u8 bank = reg >> 8;
33 	struct nct6775_data *data = ctx;
34 	struct i2c_client *client = data->driver_data;
35 
36 	if (bank != data->bank) {
37 		ret = i2c_smbus_write_byte_data(client, NCT6775_REG_BANK, bank);
38 		if (ret)
39 			return ret;
40 		data->bank = bank;
41 	}
42 
43 	ret = i2c_smbus_read_byte_data(client, reg & 0xff);
44 	if (ret < 0)
45 		return ret;
46 	tmp = ret;
47 
48 	if (nct6775_reg_is_word_sized(data, reg)) {
49 		ret = i2c_smbus_read_byte_data(client, (reg & 0xff) + 1);
50 		if (ret < 0)
51 			return ret;
52 		tmp = (tmp << 8) | ret;
53 	}
54 
55 	*val = tmp;
56 	return 0;
57 }
58 
59 /*
60  * The write operation is a dummy so as not to disturb anything being done
61  * with the chip via LPC.
62  */
63 static int nct6775_i2c_write(void *ctx, unsigned int reg, unsigned int value)
64 {
65 	struct nct6775_data *data = ctx;
66 	struct i2c_client *client = data->driver_data;
67 
68 	dev_dbg(&client->dev, "skipping attempted write: %02x -> %03x\n", value, reg);
69 
70 	/*
71 	 * This is a lie, but writing anything but the bank-select register is
72 	 * something this driver shouldn't be doing.
73 	 */
74 	return 0;
75 }
76 
77 static const struct of_device_id __maybe_unused nct6775_i2c_of_match[] = {
78 	{ .compatible = "nuvoton,nct6106", .data = (void *)nct6106, },
79 	{ .compatible = "nuvoton,nct6116", .data = (void *)nct6116, },
80 	{ .compatible = "nuvoton,nct6775", .data = (void *)nct6775, },
81 	{ .compatible = "nuvoton,nct6776", .data = (void *)nct6776, },
82 	{ .compatible = "nuvoton,nct6779", .data = (void *)nct6779, },
83 	{ .compatible = "nuvoton,nct6791", .data = (void *)nct6791, },
84 	{ .compatible = "nuvoton,nct6792", .data = (void *)nct6792, },
85 	{ .compatible = "nuvoton,nct6793", .data = (void *)nct6793, },
86 	{ .compatible = "nuvoton,nct6795", .data = (void *)nct6795, },
87 	{ .compatible = "nuvoton,nct6796", .data = (void *)nct6796, },
88 	{ .compatible = "nuvoton,nct6797", .data = (void *)nct6797, },
89 	{ .compatible = "nuvoton,nct6798", .data = (void *)nct6798, },
90 	{ .compatible = "nuvoton,nct6799", .data = (void *)nct6799, },
91 	{ },
92 };
93 MODULE_DEVICE_TABLE(of, nct6775_i2c_of_match);
94 
95 static const struct i2c_device_id nct6775_i2c_id[] = {
96 	{ "nct6106", nct6106 },
97 	{ "nct6116", nct6116 },
98 	{ "nct6775", nct6775 },
99 	{ "nct6776", nct6776 },
100 	{ "nct6779", nct6779 },
101 	{ "nct6791", nct6791 },
102 	{ "nct6792", nct6792 },
103 	{ "nct6793", nct6793 },
104 	{ "nct6795", nct6795 },
105 	{ "nct6796", nct6796 },
106 	{ "nct6797", nct6797 },
107 	{ "nct6798", nct6798 },
108 	{ "nct6799", nct6799 },
109 	{ }
110 };
111 MODULE_DEVICE_TABLE(i2c, nct6775_i2c_id);
112 
113 static int nct6775_i2c_probe_init(struct nct6775_data *data)
114 {
115 	u32 tsi_channel_mask;
116 	struct i2c_client *client = data->driver_data;
117 
118 	/*
119 	 * The i2c interface doesn't provide access to the control registers
120 	 * needed to determine the presence of other fans, but fans 1 and 2
121 	 * are (in principle) always there.
122 	 *
123 	 * In practice this is perhaps a little silly, because the system
124 	 * using this driver is mostly likely a BMC, and hence probably has
125 	 * totally separate fan tachs & pwms of its own that are actually
126 	 * controlling/monitoring the fans -- these are thus unlikely to be
127 	 * doing anything actually useful.
128 	 */
129 	data->has_fan = 0x03;
130 	data->has_fan_min = 0x03;
131 	data->has_pwm = 0x03;
132 
133 	/*
134 	 * Because on a BMC this driver may be bound very shortly after power
135 	 * is first applied to the device, the automatic TSI channel detection
136 	 * in nct6775_probe() (which has already been run at this point) may
137 	 * not find anything if a channel hasn't yet produced a temperature
138 	 * reading.  Augment whatever was found via autodetection (if
139 	 * anything) with the channels DT says should be active.
140 	 */
141 	if (!of_property_read_u32(client->dev.of_node, "nuvoton,tsi-channel-mask",
142 				  &tsi_channel_mask))
143 		data->have_tsi_temp |= tsi_channel_mask & GENMASK(NUM_TSI_TEMP - 1, 0);
144 
145 	return 0;
146 }
147 
148 static const struct regmap_config nct6775_i2c_regmap_config = {
149 	.reg_bits = 16,
150 	.val_bits = 16,
151 	.reg_read = nct6775_i2c_read,
152 	.reg_write = nct6775_i2c_write,
153 };
154 
155 static int nct6775_i2c_probe(struct i2c_client *client)
156 {
157 	struct nct6775_data *data;
158 	struct device *dev = &client->dev;
159 
160 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
161 	if (!data)
162 		return -ENOMEM;
163 
164 	data->kind = (enum kinds)(uintptr_t)i2c_get_match_data(client);
165 	data->read_only = true;
166 	data->driver_data = client;
167 	data->driver_init = nct6775_i2c_probe_init;
168 
169 	return nct6775_probe(dev, data, &nct6775_i2c_regmap_config);
170 }
171 
172 static struct i2c_driver nct6775_i2c_driver = {
173 	.class = I2C_CLASS_HWMON,
174 	.driver = {
175 		.name = "nct6775-i2c",
176 		.of_match_table = of_match_ptr(nct6775_i2c_of_match),
177 	},
178 	.probe = nct6775_i2c_probe,
179 	.id_table = nct6775_i2c_id,
180 };
181 
182 module_i2c_driver(nct6775_i2c_driver);
183 
184 MODULE_AUTHOR("Zev Weiss <zev@bewilderbeest.net>");
185 MODULE_DESCRIPTION("I2C driver for NCT6775F and compatible chips");
186 MODULE_LICENSE("GPL");
187 MODULE_IMPORT_NS(HWMON_NCT6775);
188