xref: /linux/drivers/hwmon/max6621.c (revision be709d48329a500621d2a05835283150ae137b45)
1 /*
2  * Hardware monitoring driver for Maxim MAX6621
3  *
4  * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
5  * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15  * GNU General Public License for more details.
16  */
17 
18 #include <linux/bitops.h>
19 #include <linux/hwmon.h>
20 #include <linux/hwmon-sysfs.h>
21 #include <linux/i2c.h>
22 #include <linux/init.h>
23 #include <linux/module.h>
24 #include <linux/of_device.h>
25 #include <linux/regmap.h>
26 
27 #define MAX6621_DRV_NAME		"max6621"
28 #define MAX6621_TEMP_INPUT_REG_NUM	9
29 #define MAX6621_TEMP_INPUT_MIN		-127000
30 #define MAX6621_TEMP_INPUT_MAX		128000
31 #define MAX6621_TEMP_ALERT_CHAN_SHIFT	1
32 
33 #define MAX6621_TEMP_S0D0_REG		0x00
34 #define MAX6621_TEMP_S0D1_REG		0x01
35 #define MAX6621_TEMP_S1D0_REG		0x02
36 #define MAX6621_TEMP_S1D1_REG		0x03
37 #define MAX6621_TEMP_S2D0_REG		0x04
38 #define MAX6621_TEMP_S2D1_REG		0x05
39 #define MAX6621_TEMP_S3D0_REG		0x06
40 #define MAX6621_TEMP_S3D1_REG		0x07
41 #define MAX6621_TEMP_MAX_REG		0x08
42 #define MAX6621_TEMP_MAX_ADDR_REG	0x0a
43 #define MAX6621_TEMP_ALERT_CAUSE_REG	0x0b
44 #define MAX6621_CONFIG0_REG		0x0c
45 #define MAX6621_CONFIG1_REG		0x0d
46 #define MAX6621_CONFIG2_REG		0x0e
47 #define MAX6621_CONFIG3_REG		0x0f
48 #define MAX6621_TEMP_S0_ALERT_REG	0x10
49 #define MAX6621_TEMP_S1_ALERT_REG	0x11
50 #define MAX6621_TEMP_S2_ALERT_REG	0x12
51 #define MAX6621_TEMP_S3_ALERT_REG	0x13
52 #define MAX6621_CLEAR_ALERT_REG		0x15
53 #define MAX6621_REG_MAX			(MAX6621_CLEAR_ALERT_REG + 1)
54 #define MAX6621_REG_TEMP_SHIFT		0x06
55 
56 #define MAX6621_ENABLE_TEMP_ALERTS_BIT	4
57 #define MAX6621_ENABLE_I2C_CRC_BIT	5
58 #define MAX6621_ENABLE_ALTERNATE_DATA	6
59 #define MAX6621_ENABLE_LOCKUP_TO	7
60 #define MAX6621_ENABLE_S0D0_BIT		8
61 #define MAX6621_ENABLE_S3D1_BIT		15
62 #define MAX6621_ENABLE_TEMP_ALL		GENMASK(MAX6621_ENABLE_S3D1_BIT, \
63 						MAX6621_ENABLE_S0D0_BIT)
64 #define MAX6621_POLL_DELAY_MASK		0x5
65 #define MAX6621_CONFIG0_INIT		(MAX6621_ENABLE_TEMP_ALL | \
66 					 BIT(MAX6621_ENABLE_LOCKUP_TO) | \
67 					 BIT(MAX6621_ENABLE_I2C_CRC_BIT) | \
68 					 MAX6621_POLL_DELAY_MASK)
69 #define MAX6621_PECI_BIT_TIME		0x2
70 #define MAX6621_PECI_RETRY_NUM		0x3
71 #define MAX6621_CONFIG1_INIT		((MAX6621_PECI_BIT_TIME << 8) | \
72 					 MAX6621_PECI_RETRY_NUM)
73 
74 /* Error codes */
75 #define MAX6621_TRAN_FAILED	0x8100	/*
76 					 * PECI transaction failed for more
77 					 * than the configured number of
78 					 * consecutive retries.
79 					 */
80 #define MAX6621_POOL_DIS	0x8101	/*
81 					 * Polling disabled for requested
82 					 * socket/domain.
83 					 */
84 #define MAX6621_POOL_UNCOMPLETE	0x8102	/*
85 					 * First poll not yet completed for
86 					 * requested socket/domain (on
87 					 * startup).
88 					 */
89 #define MAX6621_SD_DIS		0x8103	/*
90 					 * Read maximum temperature requested,
91 					 * but no sockets/domains enabled or
92 					 * all enabled sockets/domains have
93 					 * errors; or read maximum temperature
94 					 * address requested, but read maximum
95 					 * temperature was not called.
96 					 */
97 #define MAX6621_ALERT_DIS	0x8104	/*
98 					 * Get alert socket/domain requested,
99 					 * but no alert active.
100 					 */
101 #define MAX6621_PECI_ERR_MIN	0x8000	/* Intel spec PECI error min value. */
102 #define MAX6621_PECI_ERR_MAX	0x80ff	/* Intel spec PECI error max value. */
103 
104 static const u32 max6621_temp_regs[] = {
105 	MAX6621_TEMP_MAX_REG, MAX6621_TEMP_S0D0_REG, MAX6621_TEMP_S1D0_REG,
106 	MAX6621_TEMP_S2D0_REG, MAX6621_TEMP_S3D0_REG, MAX6621_TEMP_S0D1_REG,
107 	MAX6621_TEMP_S1D1_REG, MAX6621_TEMP_S2D1_REG, MAX6621_TEMP_S3D1_REG,
108 };
109 
110 static const char *const max6621_temp_labels[] = {
111 	"maximum",
112 	"socket0_0",
113 	"socket1_0",
114 	"socket2_0",
115 	"socket3_0",
116 	"socket0_1",
117 	"socket1_1",
118 	"socket2_1",
119 	"socket3_1",
120 };
121 
122 static const int max6621_temp_alert_chan2reg[] = {
123 	MAX6621_TEMP_S0_ALERT_REG,
124 	MAX6621_TEMP_S1_ALERT_REG,
125 	MAX6621_TEMP_S2_ALERT_REG,
126 	MAX6621_TEMP_S3_ALERT_REG,
127 };
128 
129 /**
130  * struct max6621_data - private data:
131  *
132  * @client: I2C client;
133  * @regmap: register map handle;
134  * @input_chan2reg: mapping from channel to register;
135  */
136 struct max6621_data {
137 	struct i2c_client	*client;
138 	struct regmap		*regmap;
139 	int			input_chan2reg[MAX6621_TEMP_INPUT_REG_NUM + 1];
140 };
141 
142 static long max6621_temp_mc2reg(long val)
143 {
144 	return (val / 1000L) << MAX6621_REG_TEMP_SHIFT;
145 }
146 
147 static umode_t
148 max6621_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
149 		   int channel)
150 {
151 	/* Skip channels which are not physically conncted. */
152 	if (((struct max6621_data *)data)->input_chan2reg[channel] < 0)
153 		return 0;
154 
155 	switch (type) {
156 	case hwmon_temp:
157 		switch (attr) {
158 		case hwmon_temp_input:
159 		case hwmon_temp_label:
160 		case hwmon_temp_crit_alarm:
161 			return 0444;
162 		case hwmon_temp_offset:
163 		case hwmon_temp_crit:
164 			return 0644;
165 		default:
166 			break;
167 		}
168 
169 	default:
170 		break;
171 	}
172 
173 	return 0;
174 }
175 
176 static int max6621_verify_reg_data(struct device *dev, int regval)
177 {
178 	if (regval >= MAX6621_PECI_ERR_MIN &&
179 	    regval <= MAX6621_PECI_ERR_MAX) {
180 		dev_dbg(dev, "PECI error code - err 0x%04x.\n",
181 			regval);
182 
183 		return -EIO;
184 	}
185 
186 	switch (regval) {
187 	case MAX6621_TRAN_FAILED:
188 		dev_dbg(dev, "PECI transaction failed - err 0x%04x.\n",
189 			regval);
190 		return -EIO;
191 	case MAX6621_POOL_DIS:
192 		dev_dbg(dev, "Polling disabled - err 0x%04x.\n", regval);
193 		return -EOPNOTSUPP;
194 	case MAX6621_POOL_UNCOMPLETE:
195 		dev_dbg(dev, "First poll not completed on startup - err 0x%04x.\n",
196 			regval);
197 		return -EIO;
198 	case MAX6621_SD_DIS:
199 		dev_dbg(dev, "Resource is disabled - err 0x%04x.\n", regval);
200 		return -EOPNOTSUPP;
201 	case MAX6621_ALERT_DIS:
202 		dev_dbg(dev, "No alert active - err 0x%04x.\n", regval);
203 		return -EOPNOTSUPP;
204 	default:
205 		return 0;
206 	}
207 }
208 
209 static int
210 max6621_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
211 	     int channel, long *val)
212 {
213 	struct max6621_data *data = dev_get_drvdata(dev);
214 	u32 regval;
215 	int reg;
216 	s8 temp;
217 	int ret;
218 
219 	switch (type) {
220 	case hwmon_temp:
221 		switch (attr) {
222 		case hwmon_temp_input:
223 			reg = data->input_chan2reg[channel];
224 			ret = regmap_read(data->regmap, reg, &regval);
225 			if (ret)
226 				return ret;
227 
228 			ret = max6621_verify_reg_data(dev, regval);
229 			if (ret)
230 				return ret;
231 
232 			/*
233 			 * Bit MAX6621_REG_TEMP_SHIFT represents 1 degree step.
234 			 * The temperature is given in two's complement and 8
235 			 * bits is used for the register conversion.
236 			 */
237 			temp = (regval >> MAX6621_REG_TEMP_SHIFT);
238 			*val = temp * 1000L;
239 
240 			break;
241 		case hwmon_temp_offset:
242 			ret = regmap_read(data->regmap, MAX6621_CONFIG2_REG,
243 					  &regval);
244 			if (ret)
245 				return ret;
246 
247 			ret = max6621_verify_reg_data(dev, regval);
248 			if (ret)
249 				return ret;
250 
251 			*val = (regval >> MAX6621_REG_TEMP_SHIFT) *
252 			       1000L;
253 
254 			break;
255 		case hwmon_temp_crit:
256 			channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
257 			reg = max6621_temp_alert_chan2reg[channel];
258 			ret = regmap_read(data->regmap, reg, &regval);
259 			if (ret)
260 				return ret;
261 
262 			ret = max6621_verify_reg_data(dev, regval);
263 			if (ret)
264 				return ret;
265 
266 			*val = regval * 1000L;
267 
268 			break;
269 		case hwmon_temp_crit_alarm:
270 			/*
271 			 * Set val to zero to recover the case, when reading
272 			 * MAX6621_TEMP_ALERT_CAUSE_REG results in for example
273 			 * MAX6621_ALERT_DIS. Reading will return with error,
274 			 * but in such case alarm should be returned as 0.
275 			 */
276 			*val = 0;
277 			ret = regmap_read(data->regmap,
278 					  MAX6621_TEMP_ALERT_CAUSE_REG,
279 					  &regval);
280 			if (ret)
281 				return ret;
282 
283 			ret = max6621_verify_reg_data(dev, regval);
284 			if (ret) {
285 				/* Do not report error if alert is disabled. */
286 				if (regval == MAX6621_ALERT_DIS)
287 					return 0;
288 				else
289 					return ret;
290 			}
291 
292 			/*
293 			 * Clear the alert automatically, using send-byte
294 			 * smbus protocol for clearing alert.
295 			 */
296 			if (regval) {
297 				ret = i2c_smbus_write_byte(data->client,
298 						MAX6621_CLEAR_ALERT_REG);
299 				if (ret)
300 					return ret;
301 			}
302 
303 			*val = !!regval;
304 
305 			break;
306 		default:
307 			return -EOPNOTSUPP;
308 		}
309 		break;
310 
311 	default:
312 		return -EOPNOTSUPP;
313 	}
314 
315 	return 0;
316 }
317 
318 static int
319 max6621_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
320 	      int channel, long val)
321 {
322 	struct max6621_data *data = dev_get_drvdata(dev);
323 	u32 reg;
324 
325 	switch (type) {
326 	case hwmon_temp:
327 		switch (attr) {
328 		case hwmon_temp_offset:
329 			/* Clamp to allowed range to prevent overflow. */
330 			val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
331 					MAX6621_TEMP_INPUT_MAX);
332 			val = max6621_temp_mc2reg(val);
333 
334 			return regmap_write(data->regmap,
335 					    MAX6621_CONFIG2_REG, val);
336 		case hwmon_temp_crit:
337 			channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
338 			reg = max6621_temp_alert_chan2reg[channel];
339 			/* Clamp to allowed range to prevent overflow. */
340 			val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
341 					MAX6621_TEMP_INPUT_MAX);
342 			val = val / 1000L;
343 
344 			return regmap_write(data->regmap, reg, val);
345 		default:
346 			return -EOPNOTSUPP;
347 		}
348 		break;
349 
350 	default:
351 		return -EOPNOTSUPP;
352 	}
353 
354 	return -EOPNOTSUPP;
355 }
356 
357 static int
358 max6621_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
359 		    int channel, const char **str)
360 {
361 	switch (type) {
362 	case hwmon_temp:
363 		switch (attr) {
364 		case hwmon_temp_label:
365 			*str = max6621_temp_labels[channel];
366 			return 0;
367 		default:
368 			return -EOPNOTSUPP;
369 		}
370 		break;
371 	default:
372 		return -EOPNOTSUPP;
373 	}
374 
375 	return -EOPNOTSUPP;
376 }
377 
378 static bool max6621_writeable_reg(struct device *dev, unsigned int reg)
379 {
380 	switch (reg) {
381 	case MAX6621_CONFIG0_REG:
382 	case MAX6621_CONFIG1_REG:
383 	case MAX6621_CONFIG2_REG:
384 	case MAX6621_CONFIG3_REG:
385 	case MAX6621_TEMP_S0_ALERT_REG:
386 	case MAX6621_TEMP_S1_ALERT_REG:
387 	case MAX6621_TEMP_S2_ALERT_REG:
388 	case MAX6621_TEMP_S3_ALERT_REG:
389 	case MAX6621_TEMP_ALERT_CAUSE_REG:
390 		return true;
391 	}
392 	return false;
393 }
394 
395 static bool max6621_readable_reg(struct device *dev, unsigned int reg)
396 {
397 	switch (reg) {
398 	case MAX6621_TEMP_S0D0_REG:
399 	case MAX6621_TEMP_S0D1_REG:
400 	case MAX6621_TEMP_S1D0_REG:
401 	case MAX6621_TEMP_S1D1_REG:
402 	case MAX6621_TEMP_S2D0_REG:
403 	case MAX6621_TEMP_S2D1_REG:
404 	case MAX6621_TEMP_S3D0_REG:
405 	case MAX6621_TEMP_S3D1_REG:
406 	case MAX6621_TEMP_MAX_REG:
407 	case MAX6621_TEMP_MAX_ADDR_REG:
408 	case MAX6621_CONFIG0_REG:
409 	case MAX6621_CONFIG1_REG:
410 	case MAX6621_CONFIG2_REG:
411 	case MAX6621_CONFIG3_REG:
412 	case MAX6621_TEMP_S0_ALERT_REG:
413 	case MAX6621_TEMP_S1_ALERT_REG:
414 	case MAX6621_TEMP_S2_ALERT_REG:
415 	case MAX6621_TEMP_S3_ALERT_REG:
416 		return true;
417 	}
418 	return false;
419 }
420 
421 static bool max6621_volatile_reg(struct device *dev, unsigned int reg)
422 {
423 	switch (reg) {
424 	case MAX6621_TEMP_S0D0_REG:
425 	case MAX6621_TEMP_S0D1_REG:
426 	case MAX6621_TEMP_S1D0_REG:
427 	case MAX6621_TEMP_S1D1_REG:
428 	case MAX6621_TEMP_S2D0_REG:
429 	case MAX6621_TEMP_S2D1_REG:
430 	case MAX6621_TEMP_S3D0_REG:
431 	case MAX6621_TEMP_S3D1_REG:
432 	case MAX6621_TEMP_MAX_REG:
433 	case MAX6621_TEMP_S0_ALERT_REG:
434 	case MAX6621_TEMP_S1_ALERT_REG:
435 	case MAX6621_TEMP_S2_ALERT_REG:
436 	case MAX6621_TEMP_S3_ALERT_REG:
437 	case MAX6621_TEMP_ALERT_CAUSE_REG:
438 		return true;
439 	}
440 	return false;
441 }
442 
443 static const struct reg_default max6621_regmap_default[] = {
444 	{ MAX6621_CONFIG0_REG, MAX6621_CONFIG0_INIT },
445 	{ MAX6621_CONFIG1_REG, MAX6621_CONFIG1_INIT },
446 };
447 
448 static const struct regmap_config max6621_regmap_config = {
449 	.reg_bits = 8,
450 	.val_bits = 16,
451 	.max_register = MAX6621_REG_MAX,
452 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
453 	.cache_type = REGCACHE_FLAT,
454 	.writeable_reg = max6621_writeable_reg,
455 	.readable_reg = max6621_readable_reg,
456 	.volatile_reg = max6621_volatile_reg,
457 	.reg_defaults = max6621_regmap_default,
458 	.num_reg_defaults = ARRAY_SIZE(max6621_regmap_default),
459 };
460 
461 static u32 max6621_chip_config[] = {
462 	HWMON_C_REGISTER_TZ,
463 	0
464 };
465 
466 static const struct hwmon_channel_info max6621_chip = {
467 	.type = hwmon_chip,
468 	.config = max6621_chip_config,
469 };
470 
471 static const u32 max6621_temp_config[] = {
472 	HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
473 	HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
474 	HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
475 	HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
476 	HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
477 	HWMON_T_INPUT | HWMON_T_LABEL,
478 	HWMON_T_INPUT | HWMON_T_LABEL,
479 	HWMON_T_INPUT | HWMON_T_LABEL,
480 	HWMON_T_INPUT | HWMON_T_LABEL,
481 	0
482 };
483 
484 static const struct hwmon_channel_info max6621_temp = {
485 	.type = hwmon_temp,
486 	.config = max6621_temp_config,
487 };
488 
489 static const struct hwmon_channel_info *max6621_info[] = {
490 	&max6621_chip,
491 	&max6621_temp,
492 	NULL
493 };
494 
495 static const struct hwmon_ops max6621_hwmon_ops = {
496 	.read = max6621_read,
497 	.write = max6621_write,
498 	.read_string = max6621_read_string,
499 	.is_visible = max6621_is_visible,
500 };
501 
502 static const struct hwmon_chip_info max6621_chip_info = {
503 	.ops = &max6621_hwmon_ops,
504 	.info = max6621_info,
505 };
506 
507 static int max6621_probe(struct i2c_client *client,
508 			 const struct i2c_device_id *id)
509 {
510 	struct device *dev = &client->dev;
511 	struct max6621_data *data;
512 	struct device *hwmon_dev;
513 	int i;
514 	int ret;
515 
516 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
517 	if (!data)
518 		return -ENOMEM;
519 
520 	data->regmap = devm_regmap_init_i2c(client, &max6621_regmap_config);
521 	if (IS_ERR(data->regmap))
522 		return PTR_ERR(data->regmap);
523 
524 	i2c_set_clientdata(client, data);
525 	data->client = client;
526 
527 	/* Set CONFIG0 register masking temperature alerts and PEC. */
528 	ret = regmap_write(data->regmap, MAX6621_CONFIG0_REG,
529 			   MAX6621_CONFIG0_INIT);
530 	if (ret)
531 		return ret;
532 
533 	/* Set CONFIG1 register for PEC access retry number. */
534 	ret = regmap_write(data->regmap, MAX6621_CONFIG1_REG,
535 			   MAX6621_CONFIG1_INIT);
536 	if (ret)
537 		return ret;
538 
539 	/* Sync registers with hardware. */
540 	regcache_mark_dirty(data->regmap);
541 	ret = regcache_sync(data->regmap);
542 	if (ret)
543 		return ret;
544 
545 	/* Verify which temperature input registers are enabled. */
546 	for (i = 0; i < MAX6621_TEMP_INPUT_REG_NUM; i++) {
547 		ret = i2c_smbus_read_word_data(client, max6621_temp_regs[i]);
548 		if (ret < 0)
549 			return ret;
550 		ret = max6621_verify_reg_data(dev, ret);
551 		if (ret) {
552 			data->input_chan2reg[i] = -1;
553 			continue;
554 		}
555 
556 		data->input_chan2reg[i] = max6621_temp_regs[i];
557 	}
558 
559 	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
560 							 data,
561 							 &max6621_chip_info,
562 							 NULL);
563 
564 	return PTR_ERR_OR_ZERO(hwmon_dev);
565 }
566 
567 static const struct i2c_device_id max6621_id[] = {
568 	{ MAX6621_DRV_NAME, 0 },
569 	{ }
570 };
571 MODULE_DEVICE_TABLE(i2c, max6621_id);
572 
573 static const struct of_device_id max6621_of_match[] = {
574 	{ .compatible = "maxim,max6621" },
575 	{ }
576 };
577 MODULE_DEVICE_TABLE(of, max6621_of_match);
578 
579 static struct i2c_driver max6621_driver = {
580 	.class		= I2C_CLASS_HWMON,
581 	.driver = {
582 		.name = MAX6621_DRV_NAME,
583 		.of_match_table = of_match_ptr(max6621_of_match),
584 	},
585 	.probe		= max6621_probe,
586 	.id_table	= max6621_id,
587 };
588 
589 module_i2c_driver(max6621_driver);
590 
591 MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
592 MODULE_DESCRIPTION("Driver for Maxim MAX6621");
593 MODULE_LICENSE("GPL");
594