1 /* 2 * max1619.c - Part of lm_sensors, Linux kernel modules for hardware 3 * monitoring 4 * Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru> 5 * Jean Delvare <khali@linux-fr.org> 6 * 7 * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim. 8 * It reports up to two temperatures (its own plus up to 9 * one external one). Complete datasheet can be 10 * obtained from Maxim's website at: 11 * http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License as published by 15 * the Free Software Foundation; either version 2 of the License, or 16 * (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 26 */ 27 28 29 #include <linux/module.h> 30 #include <linux/init.h> 31 #include <linux/slab.h> 32 #include <linux/jiffies.h> 33 #include <linux/i2c.h> 34 #include <linux/hwmon.h> 35 #include <linux/err.h> 36 37 static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 38 0x29, 0x2a, 0x2b, 39 0x4c, 0x4d, 0x4e, 40 I2C_CLIENT_END }; 41 42 /* 43 * Insmod parameters 44 */ 45 46 I2C_CLIENT_INSMOD_1(max1619); 47 48 /* 49 * The MAX1619 registers 50 */ 51 52 #define MAX1619_REG_R_MAN_ID 0xFE 53 #define MAX1619_REG_R_CHIP_ID 0xFF 54 #define MAX1619_REG_R_CONFIG 0x03 55 #define MAX1619_REG_W_CONFIG 0x09 56 #define MAX1619_REG_R_CONVRATE 0x04 57 #define MAX1619_REG_W_CONVRATE 0x0A 58 #define MAX1619_REG_R_STATUS 0x02 59 #define MAX1619_REG_R_LOCAL_TEMP 0x00 60 #define MAX1619_REG_R_REMOTE_TEMP 0x01 61 #define MAX1619_REG_R_REMOTE_HIGH 0x07 62 #define MAX1619_REG_W_REMOTE_HIGH 0x0D 63 #define MAX1619_REG_R_REMOTE_LOW 0x08 64 #define MAX1619_REG_W_REMOTE_LOW 0x0E 65 #define MAX1619_REG_R_REMOTE_CRIT 0x10 66 #define MAX1619_REG_W_REMOTE_CRIT 0x12 67 #define MAX1619_REG_R_TCRIT_HYST 0x11 68 #define MAX1619_REG_W_TCRIT_HYST 0x13 69 70 /* 71 * Conversions and various macros 72 */ 73 74 #define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000) 75 #define TEMP_TO_REG(val) ((val < 0 ? val+0x100*1000 : val) / 1000) 76 77 /* 78 * Functions declaration 79 */ 80 81 static int max1619_attach_adapter(struct i2c_adapter *adapter); 82 static int max1619_detect(struct i2c_adapter *adapter, int address, 83 int kind); 84 static void max1619_init_client(struct i2c_client *client); 85 static int max1619_detach_client(struct i2c_client *client); 86 static struct max1619_data *max1619_update_device(struct device *dev); 87 88 /* 89 * Driver data (common to all clients) 90 */ 91 92 static struct i2c_driver max1619_driver = { 93 .owner = THIS_MODULE, 94 .name = "max1619", 95 .flags = I2C_DF_NOTIFY, 96 .attach_adapter = max1619_attach_adapter, 97 .detach_client = max1619_detach_client, 98 }; 99 100 /* 101 * Client data (each client gets its own) 102 */ 103 104 struct max1619_data { 105 struct i2c_client client; 106 struct class_device *class_dev; 107 struct semaphore update_lock; 108 char valid; /* zero until following fields are valid */ 109 unsigned long last_updated; /* in jiffies */ 110 111 /* registers values */ 112 u8 temp_input1; /* local */ 113 u8 temp_input2, temp_low2, temp_high2; /* remote */ 114 u8 temp_crit2; 115 u8 temp_hyst2; 116 u8 alarms; 117 }; 118 119 /* 120 * Sysfs stuff 121 */ 122 123 #define show_temp(value) \ 124 static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ 125 { \ 126 struct max1619_data *data = max1619_update_device(dev); \ 127 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ 128 } 129 show_temp(temp_input1); 130 show_temp(temp_input2); 131 show_temp(temp_low2); 132 show_temp(temp_high2); 133 show_temp(temp_crit2); 134 show_temp(temp_hyst2); 135 136 #define set_temp2(value, reg) \ 137 static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ 138 size_t count) \ 139 { \ 140 struct i2c_client *client = to_i2c_client(dev); \ 141 struct max1619_data *data = i2c_get_clientdata(client); \ 142 long val = simple_strtol(buf, NULL, 10); \ 143 \ 144 down(&data->update_lock); \ 145 data->value = TEMP_TO_REG(val); \ 146 i2c_smbus_write_byte_data(client, reg, data->value); \ 147 up(&data->update_lock); \ 148 return count; \ 149 } 150 151 set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW); 152 set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH); 153 set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT); 154 set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST); 155 156 static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) 157 { 158 struct max1619_data *data = max1619_update_device(dev); 159 return sprintf(buf, "%d\n", data->alarms); 160 } 161 162 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); 163 static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); 164 static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2, 165 set_temp_low2); 166 static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, 167 set_temp_high2); 168 static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2, 169 set_temp_crit2); 170 static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2, 171 set_temp_hyst2); 172 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); 173 174 /* 175 * Real code 176 */ 177 178 static int max1619_attach_adapter(struct i2c_adapter *adapter) 179 { 180 if (!(adapter->class & I2C_CLASS_HWMON)) 181 return 0; 182 return i2c_probe(adapter, &addr_data, max1619_detect); 183 } 184 185 /* 186 * The following function does more than just detection. If detection 187 * succeeds, it also registers the new chip. 188 */ 189 static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) 190 { 191 struct i2c_client *new_client; 192 struct max1619_data *data; 193 int err = 0; 194 const char *name = ""; 195 u8 reg_config=0, reg_convrate=0, reg_status=0; 196 u8 man_id, chip_id; 197 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 198 goto exit; 199 200 if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) { 201 err = -ENOMEM; 202 goto exit; 203 } 204 205 /* The common I2C client data is placed right before the 206 MAX1619-specific data. */ 207 new_client = &data->client; 208 i2c_set_clientdata(new_client, data); 209 new_client->addr = address; 210 new_client->adapter = adapter; 211 new_client->driver = &max1619_driver; 212 new_client->flags = 0; 213 214 /* 215 * Now we do the remaining detection. A negative kind means that 216 * the driver was loaded with no force parameter (default), so we 217 * must both detect and identify the chip. A zero kind means that 218 * the driver was loaded with the force parameter, the detection 219 * step shall be skipped. A positive kind means that the driver 220 * was loaded with the force parameter and a given kind of chip is 221 * requested, so both the detection and the identification steps 222 * are skipped. 223 */ 224 if (kind < 0) { /* detection */ 225 reg_config = i2c_smbus_read_byte_data(new_client, 226 MAX1619_REG_R_CONFIG); 227 reg_convrate = i2c_smbus_read_byte_data(new_client, 228 MAX1619_REG_R_CONVRATE); 229 reg_status = i2c_smbus_read_byte_data(new_client, 230 MAX1619_REG_R_STATUS); 231 if ((reg_config & 0x03) != 0x00 232 || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) { 233 dev_dbg(&adapter->dev, 234 "MAX1619 detection failed at 0x%02x.\n", 235 address); 236 goto exit_free; 237 } 238 } 239 240 if (kind <= 0) { /* identification */ 241 242 man_id = i2c_smbus_read_byte_data(new_client, 243 MAX1619_REG_R_MAN_ID); 244 chip_id = i2c_smbus_read_byte_data(new_client, 245 MAX1619_REG_R_CHIP_ID); 246 247 if ((man_id == 0x4D) && (chip_id == 0x04)){ 248 kind = max1619; 249 } 250 } 251 252 if (kind <= 0) { /* identification failed */ 253 dev_info(&adapter->dev, 254 "Unsupported chip (man_id=0x%02X, " 255 "chip_id=0x%02X).\n", man_id, chip_id); 256 goto exit_free; 257 } 258 259 260 if (kind == max1619){ 261 name = "max1619"; 262 } 263 264 /* We can fill in the remaining client fields */ 265 strlcpy(new_client->name, name, I2C_NAME_SIZE); 266 data->valid = 0; 267 init_MUTEX(&data->update_lock); 268 269 /* Tell the I2C layer a new client has arrived */ 270 if ((err = i2c_attach_client(new_client))) 271 goto exit_free; 272 273 /* Initialize the MAX1619 chip */ 274 max1619_init_client(new_client); 275 276 /* Register sysfs hooks */ 277 data->class_dev = hwmon_device_register(&new_client->dev); 278 if (IS_ERR(data->class_dev)) { 279 err = PTR_ERR(data->class_dev); 280 goto exit_detach; 281 } 282 283 device_create_file(&new_client->dev, &dev_attr_temp1_input); 284 device_create_file(&new_client->dev, &dev_attr_temp2_input); 285 device_create_file(&new_client->dev, &dev_attr_temp2_min); 286 device_create_file(&new_client->dev, &dev_attr_temp2_max); 287 device_create_file(&new_client->dev, &dev_attr_temp2_crit); 288 device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); 289 device_create_file(&new_client->dev, &dev_attr_alarms); 290 291 return 0; 292 293 exit_detach: 294 i2c_detach_client(new_client); 295 exit_free: 296 kfree(data); 297 exit: 298 return err; 299 } 300 301 static void max1619_init_client(struct i2c_client *client) 302 { 303 u8 config; 304 305 /* 306 * Start the conversions. 307 */ 308 i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE, 309 5); /* 2 Hz */ 310 config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); 311 if (config & 0x40) 312 i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG, 313 config & 0xBF); /* run */ 314 } 315 316 static int max1619_detach_client(struct i2c_client *client) 317 { 318 struct max1619_data *data = i2c_get_clientdata(client); 319 int err; 320 321 hwmon_device_unregister(data->class_dev); 322 323 if ((err = i2c_detach_client(client))) 324 return err; 325 326 kfree(data); 327 return 0; 328 } 329 330 static struct max1619_data *max1619_update_device(struct device *dev) 331 { 332 struct i2c_client *client = to_i2c_client(dev); 333 struct max1619_data *data = i2c_get_clientdata(client); 334 335 down(&data->update_lock); 336 337 if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { 338 dev_dbg(&client->dev, "Updating max1619 data.\n"); 339 data->temp_input1 = i2c_smbus_read_byte_data(client, 340 MAX1619_REG_R_LOCAL_TEMP); 341 data->temp_input2 = i2c_smbus_read_byte_data(client, 342 MAX1619_REG_R_REMOTE_TEMP); 343 data->temp_high2 = i2c_smbus_read_byte_data(client, 344 MAX1619_REG_R_REMOTE_HIGH); 345 data->temp_low2 = i2c_smbus_read_byte_data(client, 346 MAX1619_REG_R_REMOTE_LOW); 347 data->temp_crit2 = i2c_smbus_read_byte_data(client, 348 MAX1619_REG_R_REMOTE_CRIT); 349 data->temp_hyst2 = i2c_smbus_read_byte_data(client, 350 MAX1619_REG_R_TCRIT_HYST); 351 data->alarms = i2c_smbus_read_byte_data(client, 352 MAX1619_REG_R_STATUS); 353 354 data->last_updated = jiffies; 355 data->valid = 1; 356 } 357 358 up(&data->update_lock); 359 360 return data; 361 } 362 363 static int __init sensors_max1619_init(void) 364 { 365 return i2c_add_driver(&max1619_driver); 366 } 367 368 static void __exit sensors_max1619_exit(void) 369 { 370 i2c_del_driver(&max1619_driver); 371 } 372 373 MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and " 374 "Jean Delvare <khali@linux-fr.org>"); 375 MODULE_DESCRIPTION("MAX1619 sensor driver"); 376 MODULE_LICENSE("GPL"); 377 378 module_init(sensors_max1619_init); 379 module_exit(sensors_max1619_exit); 380