1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Analog Devices LTC2947 high precision power and energy monitor 4 * 5 * Copyright 2019 Analog Devices Inc. 6 */ 7 #include <linux/bitfield.h> 8 #include <linux/bits.h> 9 #include <linux/clk.h> 10 #include <linux/device.h> 11 #include <linux/hwmon.h> 12 #include <linux/hwmon-sysfs.h> 13 #include <linux/module.h> 14 #include <linux/of.h> 15 #include <linux/regmap.h> 16 17 #include "ltc2947.h" 18 19 /* register's */ 20 #define LTC2947_REG_PAGE_CTRL 0xFF 21 #define LTC2947_REG_CTRL 0xF0 22 #define LTC2947_REG_TBCTL 0xE9 23 #define LTC2947_CONT_MODE_MASK BIT(3) 24 #define LTC2947_CONT_MODE(x) FIELD_PREP(LTC2947_CONT_MODE_MASK, x) 25 #define LTC2947_PRE_MASK GENMASK(2, 0) 26 #define LTC2947_PRE(x) FIELD_PREP(LTC2947_PRE_MASK, x) 27 #define LTC2947_DIV_MASK GENMASK(7, 3) 28 #define LTC2947_DIV(x) FIELD_PREP(LTC2947_DIV_MASK, x) 29 #define LTC2947_SHUTDOWN_MASK BIT(0) 30 #define LTC2947_REG_ACCUM_POL 0xE1 31 #define LTC2947_ACCUM_POL_1_MASK GENMASK(1, 0) 32 #define LTC2947_ACCUM_POL_1(x) FIELD_PREP(LTC2947_ACCUM_POL_1_MASK, x) 33 #define LTC2947_ACCUM_POL_2_MASK GENMASK(3, 2) 34 #define LTC2947_ACCUM_POL_2(x) FIELD_PREP(LTC2947_ACCUM_POL_2_MASK, x) 35 #define LTC2947_REG_ACCUM_DEADBAND 0xE4 36 #define LTC2947_REG_GPIOSTATCTL 0x67 37 #define LTC2947_GPIO_EN_MASK BIT(0) 38 #define LTC2947_GPIO_EN(x) FIELD_PREP(LTC2947_GPIO_EN_MASK, x) 39 #define LTC2947_GPIO_FAN_EN_MASK BIT(6) 40 #define LTC2947_GPIO_FAN_EN(x) FIELD_PREP(LTC2947_GPIO_FAN_EN_MASK, x) 41 #define LTC2947_GPIO_FAN_POL_MASK BIT(7) 42 #define LTC2947_GPIO_FAN_POL(x) FIELD_PREP(LTC2947_GPIO_FAN_POL_MASK, x) 43 #define LTC2947_REG_GPIO_ACCUM 0xE3 44 /* 200Khz */ 45 #define LTC2947_CLK_MIN 200000 46 /* 25Mhz */ 47 #define LTC2947_CLK_MAX 25000000 48 #define LTC2947_PAGE0 0 49 #define LTC2947_PAGE1 1 50 /* Voltage registers */ 51 #define LTC2947_REG_VOLTAGE 0xA0 52 #define LTC2947_REG_VOLTAGE_MAX 0x50 53 #define LTC2947_REG_VOLTAGE_MIN 0x52 54 #define LTC2947_REG_VOLTAGE_THRE_H 0x90 55 #define LTC2947_REG_VOLTAGE_THRE_L 0x92 56 #define LTC2947_REG_DVCC 0xA4 57 #define LTC2947_REG_DVCC_MAX 0x58 58 #define LTC2947_REG_DVCC_MIN 0x5A 59 #define LTC2947_REG_DVCC_THRE_H 0x98 60 #define LTC2947_REG_DVCC_THRE_L 0x9A 61 #define LTC2947_VOLTAGE_GEN_CHAN 0 62 #define LTC2947_VOLTAGE_DVCC_CHAN 1 63 /* in mV */ 64 #define VOLTAGE_MAX 15500 65 #define VOLTAGE_MIN -300 66 #define VDVCC_MAX 15000 67 #define VDVCC_MIN 4750 68 /* Current registers */ 69 #define LTC2947_REG_CURRENT 0x90 70 #define LTC2947_REG_CURRENT_MAX 0x40 71 #define LTC2947_REG_CURRENT_MIN 0x42 72 #define LTC2947_REG_CURRENT_THRE_H 0x80 73 #define LTC2947_REG_CURRENT_THRE_L 0x82 74 /* in mA */ 75 #define CURRENT_MAX 30000 76 #define CURRENT_MIN -30000 77 /* Power registers */ 78 #define LTC2947_REG_POWER 0x93 79 #define LTC2947_REG_POWER_MAX 0x44 80 #define LTC2947_REG_POWER_MIN 0x46 81 #define LTC2947_REG_POWER_THRE_H 0x84 82 #define LTC2947_REG_POWER_THRE_L 0x86 83 /* in uW */ 84 #define POWER_MAX 450000000 85 #define POWER_MIN -450000000 86 /* Temperature registers */ 87 #define LTC2947_REG_TEMP 0xA2 88 #define LTC2947_REG_TEMP_MAX 0x54 89 #define LTC2947_REG_TEMP_MIN 0x56 90 #define LTC2947_REG_TEMP_THRE_H 0x94 91 #define LTC2947_REG_TEMP_THRE_L 0x96 92 #define LTC2947_REG_TEMP_FAN_THRE_H 0x9C 93 #define LTC2947_REG_TEMP_FAN_THRE_L 0x9E 94 #define LTC2947_TEMP_FAN_CHAN 1 95 /* in millidegress Celsius */ 96 #define TEMP_MAX 85000 97 #define TEMP_MIN -40000 98 /* Energy registers */ 99 #define LTC2947_REG_ENERGY1 0x06 100 #define LTC2947_REG_ENERGY2 0x16 101 /* Status/Alarm/Overflow registers */ 102 #define LTC2947_REG_STATUS 0x80 103 #define LTC2947_REG_STATVT 0x81 104 #define LTC2947_REG_STATIP 0x82 105 #define LTC2947_REG_STATVDVCC 0x87 106 107 #define LTC2947_ALERTS_SIZE (LTC2947_REG_STATVDVCC - LTC2947_REG_STATUS) 108 #define LTC2947_MAX_VOLTAGE_MASK BIT(0) 109 #define LTC2947_MIN_VOLTAGE_MASK BIT(1) 110 #define LTC2947_MAX_CURRENT_MASK BIT(0) 111 #define LTC2947_MIN_CURRENT_MASK BIT(1) 112 #define LTC2947_MAX_POWER_MASK BIT(2) 113 #define LTC2947_MIN_POWER_MASK BIT(3) 114 #define LTC2947_MAX_TEMP_MASK BIT(2) 115 #define LTC2947_MIN_TEMP_MASK BIT(3) 116 #define LTC2947_MAX_TEMP_FAN_MASK BIT(4) 117 #define LTC2947_MIN_TEMP_FAN_MASK BIT(5) 118 119 struct ltc2947_data { 120 struct regmap *map; 121 struct device *dev; 122 /* 123 * The mutex is needed because the device has 2 memory pages. When 124 * reading/writing the correct page needs to be set so that, the 125 * complete sequence select_page->read/write needs to be protected. 126 */ 127 struct mutex lock; 128 u32 lsb_energy; 129 bool gpio_out; 130 }; 131 132 static int __ltc2947_val_read16(const struct ltc2947_data *st, const u8 reg, 133 u64 *val) 134 { 135 __be16 __val = 0; 136 int ret; 137 138 ret = regmap_bulk_read(st->map, reg, &__val, 2); 139 if (ret) 140 return ret; 141 142 *val = be16_to_cpu(__val); 143 144 return 0; 145 } 146 147 static int __ltc2947_val_read24(const struct ltc2947_data *st, const u8 reg, 148 u64 *val) 149 { 150 __be32 __val = 0; 151 int ret; 152 153 ret = regmap_bulk_read(st->map, reg, &__val, 3); 154 if (ret) 155 return ret; 156 157 *val = be32_to_cpu(__val) >> 8; 158 159 return 0; 160 } 161 162 static int __ltc2947_val_read64(const struct ltc2947_data *st, const u8 reg, 163 u64 *val) 164 { 165 __be64 __val = 0; 166 int ret; 167 168 ret = regmap_bulk_read(st->map, reg, &__val, 6); 169 if (ret) 170 return ret; 171 172 *val = be64_to_cpu(__val) >> 16; 173 174 return 0; 175 } 176 177 static int ltc2947_val_read(struct ltc2947_data *st, const u8 reg, 178 const u8 page, const size_t size, s64 *val) 179 { 180 int ret; 181 u64 __val = 0; 182 183 mutex_lock(&st->lock); 184 185 ret = regmap_write(st->map, LTC2947_REG_PAGE_CTRL, page); 186 if (ret) { 187 mutex_unlock(&st->lock); 188 return ret; 189 } 190 191 dev_dbg(st->dev, "Read val, reg:%02X, p:%d sz:%zu\n", reg, page, 192 size); 193 194 switch (size) { 195 case 2: 196 ret = __ltc2947_val_read16(st, reg, &__val); 197 break; 198 case 3: 199 ret = __ltc2947_val_read24(st, reg, &__val); 200 break; 201 case 6: 202 ret = __ltc2947_val_read64(st, reg, &__val); 203 break; 204 default: 205 ret = -EINVAL; 206 break; 207 } 208 209 mutex_unlock(&st->lock); 210 211 if (ret) 212 return ret; 213 214 *val = sign_extend64(__val, (8 * size) - 1); 215 216 dev_dbg(st->dev, "Got s:%lld, u:%016llX\n", *val, __val); 217 218 return 0; 219 } 220 221 static int __ltc2947_val_write64(const struct ltc2947_data *st, const u8 reg, 222 const u64 val) 223 { 224 __be64 __val; 225 226 __val = cpu_to_be64(val << 16); 227 return regmap_bulk_write(st->map, reg, &__val, 6); 228 } 229 230 static int __ltc2947_val_write16(const struct ltc2947_data *st, const u8 reg, 231 const u16 val) 232 { 233 __be16 __val; 234 235 __val = cpu_to_be16(val); 236 return regmap_bulk_write(st->map, reg, &__val, 2); 237 } 238 239 static int ltc2947_val_write(struct ltc2947_data *st, const u8 reg, 240 const u8 page, const size_t size, const u64 val) 241 { 242 int ret; 243 244 mutex_lock(&st->lock); 245 /* set device on correct page */ 246 ret = regmap_write(st->map, LTC2947_REG_PAGE_CTRL, page); 247 if (ret) { 248 mutex_unlock(&st->lock); 249 return ret; 250 } 251 252 dev_dbg(st->dev, "Write val, r:%02X, p:%d, sz:%zu, val:%016llX\n", 253 reg, page, size, val); 254 255 switch (size) { 256 case 2: 257 ret = __ltc2947_val_write16(st, reg, val); 258 break; 259 case 6: 260 ret = __ltc2947_val_write64(st, reg, val); 261 break; 262 default: 263 ret = -EINVAL; 264 break; 265 } 266 267 mutex_unlock(&st->lock); 268 269 return ret; 270 } 271 272 static int ltc2947_reset_history(struct ltc2947_data *st, const u8 reg_h, 273 const u8 reg_l) 274 { 275 int ret; 276 /* 277 * let's reset the tracking register's. Tracking register's have all 278 * 2 bytes size 279 */ 280 ret = ltc2947_val_write(st, reg_h, LTC2947_PAGE0, 2, 0x8000U); 281 if (ret) 282 return ret; 283 284 return ltc2947_val_write(st, reg_l, LTC2947_PAGE0, 2, 0x7FFFU); 285 } 286 287 static int ltc2947_alarm_read(struct ltc2947_data *st, const u8 reg, 288 const u32 mask, long *val) 289 { 290 u8 offset = reg - LTC2947_REG_STATUS; 291 /* +1 to include status reg */ 292 char alarms[LTC2947_ALERTS_SIZE + 1]; 293 int ret = 0; 294 295 memset(alarms, 0, sizeof(alarms)); 296 297 mutex_lock(&st->lock); 298 299 ret = regmap_write(st->map, LTC2947_REG_PAGE_CTRL, LTC2947_PAGE0); 300 if (ret) 301 goto unlock; 302 303 dev_dbg(st->dev, "Read alarm, reg:%02X, mask:%02X\n", reg, mask); 304 /* 305 * As stated in the datasheet, when Threshold and Overflow registers 306 * are used, the status and all alert registers must be read in one 307 * multi-byte transaction. 308 */ 309 ret = regmap_bulk_read(st->map, LTC2947_REG_STATUS, alarms, 310 sizeof(alarms)); 311 if (ret) 312 goto unlock; 313 314 /* get the alarm */ 315 *val = !!(alarms[offset] & mask); 316 unlock: 317 mutex_unlock(&st->lock); 318 return ret; 319 } 320 321 static ssize_t ltc2947_show_value(struct device *dev, 322 struct device_attribute *da, char *buf) 323 { 324 struct ltc2947_data *st = dev_get_drvdata(dev); 325 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); 326 int ret; 327 s64 val = 0; 328 329 ret = ltc2947_val_read(st, attr->index, LTC2947_PAGE0, 6, &val); 330 if (ret) 331 return ret; 332 333 /* value in microJoule. st->lsb_energy was multiplied by 10E9 */ 334 val = div_s64(val * st->lsb_energy, 1000); 335 336 return sprintf(buf, "%lld\n", val); 337 } 338 339 static int ltc2947_read_temp(struct device *dev, const u32 attr, long *val, 340 const int channel) 341 { 342 int ret; 343 struct ltc2947_data *st = dev_get_drvdata(dev); 344 s64 __val = 0; 345 346 switch (attr) { 347 case hwmon_temp_input: 348 ret = ltc2947_val_read(st, LTC2947_REG_TEMP, LTC2947_PAGE0, 349 2, &__val); 350 break; 351 case hwmon_temp_highest: 352 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_MAX, LTC2947_PAGE0, 353 2, &__val); 354 break; 355 case hwmon_temp_lowest: 356 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_MIN, LTC2947_PAGE0, 357 2, &__val); 358 break; 359 case hwmon_temp_max_alarm: 360 if (channel == LTC2947_TEMP_FAN_CHAN) 361 return ltc2947_alarm_read(st, LTC2947_REG_STATVT, 362 LTC2947_MAX_TEMP_FAN_MASK, 363 val); 364 365 return ltc2947_alarm_read(st, LTC2947_REG_STATVT, 366 LTC2947_MAX_TEMP_MASK, val); 367 case hwmon_temp_min_alarm: 368 if (channel == LTC2947_TEMP_FAN_CHAN) 369 return ltc2947_alarm_read(st, LTC2947_REG_STATVT, 370 LTC2947_MIN_TEMP_FAN_MASK, 371 val); 372 373 return ltc2947_alarm_read(st, LTC2947_REG_STATVT, 374 LTC2947_MIN_TEMP_MASK, val); 375 case hwmon_temp_max: 376 if (channel == LTC2947_TEMP_FAN_CHAN) 377 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_FAN_THRE_H, 378 LTC2947_PAGE1, 2, &__val); 379 else 380 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_THRE_H, 381 LTC2947_PAGE1, 2, &__val); 382 break; 383 case hwmon_temp_min: 384 if (channel == LTC2947_TEMP_FAN_CHAN) 385 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_FAN_THRE_L, 386 LTC2947_PAGE1, 2, &__val); 387 else 388 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_THRE_L, 389 LTC2947_PAGE1, 2, &__val); 390 break; 391 default: 392 return -ENOTSUPP; 393 } 394 395 if (ret) 396 return ret; 397 398 /* in milidegrees celcius, temp is given by: */ 399 *val = (__val * 204) + 550; 400 401 return 0; 402 } 403 404 static int ltc2947_read_power(struct device *dev, const u32 attr, long *val) 405 { 406 struct ltc2947_data *st = dev_get_drvdata(dev); 407 int ret; 408 u32 lsb = 200000; /* in uW */ 409 s64 __val = 0; 410 411 switch (attr) { 412 case hwmon_power_input: 413 ret = ltc2947_val_read(st, LTC2947_REG_POWER, LTC2947_PAGE0, 414 3, &__val); 415 lsb = 50000; 416 break; 417 case hwmon_power_input_highest: 418 ret = ltc2947_val_read(st, LTC2947_REG_POWER_MAX, LTC2947_PAGE0, 419 2, &__val); 420 break; 421 case hwmon_power_input_lowest: 422 ret = ltc2947_val_read(st, LTC2947_REG_POWER_MIN, LTC2947_PAGE0, 423 2, &__val); 424 break; 425 case hwmon_power_max_alarm: 426 return ltc2947_alarm_read(st, LTC2947_REG_STATIP, 427 LTC2947_MAX_POWER_MASK, val); 428 case hwmon_power_min_alarm: 429 return ltc2947_alarm_read(st, LTC2947_REG_STATIP, 430 LTC2947_MIN_POWER_MASK, val); 431 case hwmon_power_max: 432 ret = ltc2947_val_read(st, LTC2947_REG_POWER_THRE_H, 433 LTC2947_PAGE1, 2, &__val); 434 break; 435 case hwmon_power_min: 436 ret = ltc2947_val_read(st, LTC2947_REG_POWER_THRE_L, 437 LTC2947_PAGE1, 2, &__val); 438 break; 439 default: 440 return -ENOTSUPP; 441 } 442 443 if (ret) 444 return ret; 445 446 *val = __val * lsb; 447 448 return 0; 449 } 450 451 static int ltc2947_read_curr(struct device *dev, const u32 attr, long *val) 452 { 453 struct ltc2947_data *st = dev_get_drvdata(dev); 454 int ret; 455 u8 lsb = 12; /* in mA */ 456 s64 __val = 0; 457 458 switch (attr) { 459 case hwmon_curr_input: 460 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT, 461 LTC2947_PAGE0, 3, &__val); 462 lsb = 3; 463 break; 464 case hwmon_curr_highest: 465 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_MAX, 466 LTC2947_PAGE0, 2, &__val); 467 break; 468 case hwmon_curr_lowest: 469 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_MIN, 470 LTC2947_PAGE0, 2, &__val); 471 break; 472 case hwmon_curr_max_alarm: 473 return ltc2947_alarm_read(st, LTC2947_REG_STATIP, 474 LTC2947_MAX_CURRENT_MASK, val); 475 case hwmon_curr_min_alarm: 476 return ltc2947_alarm_read(st, LTC2947_REG_STATIP, 477 LTC2947_MIN_CURRENT_MASK, val); 478 case hwmon_curr_max: 479 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_THRE_H, 480 LTC2947_PAGE1, 2, &__val); 481 break; 482 case hwmon_curr_min: 483 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_THRE_L, 484 LTC2947_PAGE1, 2, &__val); 485 break; 486 default: 487 return -ENOTSUPP; 488 } 489 490 if (ret) 491 return ret; 492 493 *val = __val * lsb; 494 495 return 0; 496 } 497 498 static int ltc2947_read_in(struct device *dev, const u32 attr, long *val, 499 const int channel) 500 { 501 struct ltc2947_data *st = dev_get_drvdata(dev); 502 int ret; 503 u8 lsb = 2; /* in mV */ 504 s64 __val = 0; 505 506 if (channel < 0 || channel > LTC2947_VOLTAGE_DVCC_CHAN) { 507 dev_err(st->dev, "Invalid chan%d for voltage", channel); 508 return -EINVAL; 509 } 510 511 switch (attr) { 512 case hwmon_in_input: 513 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) { 514 ret = ltc2947_val_read(st, LTC2947_REG_DVCC, 515 LTC2947_PAGE0, 2, &__val); 516 lsb = 145; 517 } else { 518 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE, 519 LTC2947_PAGE0, 2, &__val); 520 } 521 break; 522 case hwmon_in_highest: 523 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) { 524 ret = ltc2947_val_read(st, LTC2947_REG_DVCC_MAX, 525 LTC2947_PAGE0, 2, &__val); 526 lsb = 145; 527 } else { 528 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_MAX, 529 LTC2947_PAGE0, 2, &__val); 530 } 531 break; 532 case hwmon_in_lowest: 533 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) { 534 ret = ltc2947_val_read(st, LTC2947_REG_DVCC_MIN, 535 LTC2947_PAGE0, 2, &__val); 536 lsb = 145; 537 } else { 538 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_MIN, 539 LTC2947_PAGE0, 2, &__val); 540 } 541 break; 542 case hwmon_in_max_alarm: 543 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) 544 return ltc2947_alarm_read(st, LTC2947_REG_STATVDVCC, 545 LTC2947_MAX_VOLTAGE_MASK, 546 val); 547 548 return ltc2947_alarm_read(st, LTC2947_REG_STATVT, 549 LTC2947_MAX_VOLTAGE_MASK, val); 550 case hwmon_in_min_alarm: 551 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) 552 return ltc2947_alarm_read(st, LTC2947_REG_STATVDVCC, 553 LTC2947_MIN_VOLTAGE_MASK, 554 val); 555 556 return ltc2947_alarm_read(st, LTC2947_REG_STATVT, 557 LTC2947_MIN_VOLTAGE_MASK, val); 558 case hwmon_in_max: 559 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) { 560 ret = ltc2947_val_read(st, LTC2947_REG_DVCC_THRE_H, 561 LTC2947_PAGE1, 2, &__val); 562 lsb = 145; 563 } else { 564 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_THRE_H, 565 LTC2947_PAGE1, 2, &__val); 566 } 567 break; 568 case hwmon_in_min: 569 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) { 570 ret = ltc2947_val_read(st, LTC2947_REG_DVCC_THRE_L, 571 LTC2947_PAGE1, 2, &__val); 572 lsb = 145; 573 } else { 574 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_THRE_L, 575 LTC2947_PAGE1, 2, &__val); 576 } 577 break; 578 default: 579 return -ENOTSUPP; 580 } 581 582 if (ret) 583 return ret; 584 585 *val = __val * lsb; 586 587 return 0; 588 } 589 590 static int ltc2947_read(struct device *dev, enum hwmon_sensor_types type, 591 u32 attr, int channel, long *val) 592 { 593 switch (type) { 594 case hwmon_in: 595 return ltc2947_read_in(dev, attr, val, channel); 596 case hwmon_curr: 597 return ltc2947_read_curr(dev, attr, val); 598 case hwmon_power: 599 return ltc2947_read_power(dev, attr, val); 600 case hwmon_temp: 601 return ltc2947_read_temp(dev, attr, val, channel); 602 default: 603 return -ENOTSUPP; 604 } 605 } 606 607 static int ltc2947_write_temp(struct device *dev, const u32 attr, 608 long val, const int channel) 609 { 610 struct ltc2947_data *st = dev_get_drvdata(dev); 611 612 if (channel < 0 || channel > LTC2947_TEMP_FAN_CHAN) { 613 dev_err(st->dev, "Invalid chan%d for temperature", channel); 614 return -EINVAL; 615 } 616 617 switch (attr) { 618 case hwmon_temp_reset_history: 619 if (val != 1) 620 return -EINVAL; 621 return ltc2947_reset_history(st, LTC2947_REG_TEMP_MAX, 622 LTC2947_REG_TEMP_MIN); 623 case hwmon_temp_max: 624 val = clamp_val(val, TEMP_MIN, TEMP_MAX); 625 if (channel == LTC2947_TEMP_FAN_CHAN) { 626 if (!st->gpio_out) 627 return -ENOTSUPP; 628 629 return ltc2947_val_write(st, 630 LTC2947_REG_TEMP_FAN_THRE_H, 631 LTC2947_PAGE1, 2, 632 DIV_ROUND_CLOSEST(val - 550, 204)); 633 } 634 635 return ltc2947_val_write(st, LTC2947_REG_TEMP_THRE_H, 636 LTC2947_PAGE1, 2, 637 DIV_ROUND_CLOSEST(val - 550, 204)); 638 case hwmon_temp_min: 639 val = clamp_val(val, TEMP_MIN, TEMP_MAX); 640 if (channel == LTC2947_TEMP_FAN_CHAN) { 641 if (!st->gpio_out) 642 return -ENOTSUPP; 643 644 return ltc2947_val_write(st, 645 LTC2947_REG_TEMP_FAN_THRE_L, 646 LTC2947_PAGE1, 2, 647 DIV_ROUND_CLOSEST(val - 550, 204)); 648 } 649 650 return ltc2947_val_write(st, LTC2947_REG_TEMP_THRE_L, 651 LTC2947_PAGE1, 2, 652 DIV_ROUND_CLOSEST(val - 550, 204)); 653 default: 654 return -ENOTSUPP; 655 } 656 } 657 658 static int ltc2947_write_power(struct device *dev, const u32 attr, 659 long val) 660 { 661 struct ltc2947_data *st = dev_get_drvdata(dev); 662 663 switch (attr) { 664 case hwmon_power_reset_history: 665 if (val != 1) 666 return -EINVAL; 667 return ltc2947_reset_history(st, LTC2947_REG_POWER_MAX, 668 LTC2947_REG_POWER_MIN); 669 case hwmon_power_max: 670 val = clamp_val(val, POWER_MIN, POWER_MAX); 671 return ltc2947_val_write(st, LTC2947_REG_POWER_THRE_H, 672 LTC2947_PAGE1, 2, 673 DIV_ROUND_CLOSEST(val, 200000)); 674 case hwmon_power_min: 675 val = clamp_val(val, POWER_MIN, POWER_MAX); 676 return ltc2947_val_write(st, LTC2947_REG_POWER_THRE_L, 677 LTC2947_PAGE1, 2, 678 DIV_ROUND_CLOSEST(val, 200000)); 679 default: 680 return -ENOTSUPP; 681 } 682 } 683 684 static int ltc2947_write_curr(struct device *dev, const u32 attr, 685 long val) 686 { 687 struct ltc2947_data *st = dev_get_drvdata(dev); 688 689 switch (attr) { 690 case hwmon_curr_reset_history: 691 if (val != 1) 692 return -EINVAL; 693 return ltc2947_reset_history(st, LTC2947_REG_CURRENT_MAX, 694 LTC2947_REG_CURRENT_MIN); 695 case hwmon_curr_max: 696 val = clamp_val(val, CURRENT_MIN, CURRENT_MAX); 697 return ltc2947_val_write(st, LTC2947_REG_CURRENT_THRE_H, 698 LTC2947_PAGE1, 2, 699 DIV_ROUND_CLOSEST(val, 12)); 700 case hwmon_curr_min: 701 val = clamp_val(val, CURRENT_MIN, CURRENT_MAX); 702 return ltc2947_val_write(st, LTC2947_REG_CURRENT_THRE_L, 703 LTC2947_PAGE1, 2, 704 DIV_ROUND_CLOSEST(val, 12)); 705 default: 706 return -ENOTSUPP; 707 } 708 } 709 710 static int ltc2947_write_in(struct device *dev, const u32 attr, long val, 711 const int channel) 712 { 713 struct ltc2947_data *st = dev_get_drvdata(dev); 714 715 if (channel > LTC2947_VOLTAGE_DVCC_CHAN) { 716 dev_err(st->dev, "Invalid chan%d for voltage", channel); 717 return -EINVAL; 718 } 719 720 switch (attr) { 721 case hwmon_in_reset_history: 722 if (val != 1) 723 return -EINVAL; 724 725 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) 726 return ltc2947_reset_history(st, LTC2947_REG_DVCC_MAX, 727 LTC2947_REG_DVCC_MIN); 728 729 return ltc2947_reset_history(st, LTC2947_REG_VOLTAGE_MAX, 730 LTC2947_REG_VOLTAGE_MIN); 731 case hwmon_in_max: 732 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) { 733 val = clamp_val(val, VDVCC_MIN, VDVCC_MAX); 734 return ltc2947_val_write(st, LTC2947_REG_DVCC_THRE_H, 735 LTC2947_PAGE1, 2, 736 DIV_ROUND_CLOSEST(val, 145)); 737 } 738 739 val = clamp_val(val, VOLTAGE_MIN, VOLTAGE_MAX); 740 return ltc2947_val_write(st, LTC2947_REG_VOLTAGE_THRE_H, 741 LTC2947_PAGE1, 2, 742 DIV_ROUND_CLOSEST(val, 2)); 743 case hwmon_in_min: 744 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) { 745 val = clamp_val(val, VDVCC_MIN, VDVCC_MAX); 746 return ltc2947_val_write(st, LTC2947_REG_DVCC_THRE_L, 747 LTC2947_PAGE1, 2, 748 DIV_ROUND_CLOSEST(val, 145)); 749 } 750 751 val = clamp_val(val, VOLTAGE_MIN, VOLTAGE_MAX); 752 return ltc2947_val_write(st, LTC2947_REG_VOLTAGE_THRE_L, 753 LTC2947_PAGE1, 2, 754 DIV_ROUND_CLOSEST(val, 2)); 755 default: 756 return -ENOTSUPP; 757 } 758 } 759 760 static int ltc2947_write(struct device *dev, 761 enum hwmon_sensor_types type, 762 u32 attr, int channel, long val) 763 { 764 switch (type) { 765 case hwmon_in: 766 return ltc2947_write_in(dev, attr, val, channel); 767 case hwmon_curr: 768 return ltc2947_write_curr(dev, attr, val); 769 case hwmon_power: 770 return ltc2947_write_power(dev, attr, val); 771 case hwmon_temp: 772 return ltc2947_write_temp(dev, attr, val, channel); 773 default: 774 return -ENOTSUPP; 775 } 776 } 777 778 static int ltc2947_read_labels(struct device *dev, 779 enum hwmon_sensor_types type, 780 u32 attr, int channel, const char **str) 781 { 782 switch (type) { 783 case hwmon_in: 784 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) 785 *str = "DVCC"; 786 else 787 *str = "VP-VM"; 788 return 0; 789 case hwmon_curr: 790 *str = "IP-IM"; 791 return 0; 792 case hwmon_temp: 793 if (channel == LTC2947_TEMP_FAN_CHAN) 794 *str = "TEMPFAN"; 795 else 796 *str = "Ambient"; 797 return 0; 798 case hwmon_power: 799 *str = "Power"; 800 return 0; 801 default: 802 return -ENOTSUPP; 803 } 804 } 805 806 static int ltc2947_in_is_visible(const u32 attr) 807 { 808 switch (attr) { 809 case hwmon_in_input: 810 case hwmon_in_highest: 811 case hwmon_in_lowest: 812 case hwmon_in_max_alarm: 813 case hwmon_in_min_alarm: 814 case hwmon_in_label: 815 return 0444; 816 case hwmon_in_reset_history: 817 return 0200; 818 case hwmon_in_max: 819 case hwmon_in_min: 820 return 0644; 821 default: 822 return 0; 823 } 824 } 825 826 static int ltc2947_curr_is_visible(const u32 attr) 827 { 828 switch (attr) { 829 case hwmon_curr_input: 830 case hwmon_curr_highest: 831 case hwmon_curr_lowest: 832 case hwmon_curr_max_alarm: 833 case hwmon_curr_min_alarm: 834 case hwmon_curr_label: 835 return 0444; 836 case hwmon_curr_reset_history: 837 return 0200; 838 case hwmon_curr_max: 839 case hwmon_curr_min: 840 return 0644; 841 default: 842 return 0; 843 } 844 } 845 846 static int ltc2947_power_is_visible(const u32 attr) 847 { 848 switch (attr) { 849 case hwmon_power_input: 850 case hwmon_power_input_highest: 851 case hwmon_power_input_lowest: 852 case hwmon_power_label: 853 case hwmon_power_max_alarm: 854 case hwmon_power_min_alarm: 855 return 0444; 856 case hwmon_power_reset_history: 857 return 0200; 858 case hwmon_power_max: 859 case hwmon_power_min: 860 return 0644; 861 default: 862 return 0; 863 } 864 } 865 866 static int ltc2947_temp_is_visible(const u32 attr) 867 { 868 switch (attr) { 869 case hwmon_temp_input: 870 case hwmon_temp_highest: 871 case hwmon_temp_lowest: 872 case hwmon_temp_max_alarm: 873 case hwmon_temp_min_alarm: 874 case hwmon_temp_label: 875 return 0444; 876 case hwmon_temp_reset_history: 877 return 0200; 878 case hwmon_temp_max: 879 case hwmon_temp_min: 880 return 0644; 881 default: 882 return 0; 883 } 884 } 885 886 static umode_t ltc2947_is_visible(const void *data, 887 enum hwmon_sensor_types type, 888 u32 attr, int channel) 889 { 890 switch (type) { 891 case hwmon_in: 892 return ltc2947_in_is_visible(attr); 893 case hwmon_curr: 894 return ltc2947_curr_is_visible(attr); 895 case hwmon_power: 896 return ltc2947_power_is_visible(attr); 897 case hwmon_temp: 898 return ltc2947_temp_is_visible(attr); 899 default: 900 return 0; 901 } 902 } 903 904 static const struct hwmon_channel_info *ltc2947_info[] = { 905 HWMON_CHANNEL_INFO(in, 906 HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | 907 HWMON_I_MAX | HWMON_I_MIN | HWMON_I_RESET_HISTORY | 908 HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM | 909 HWMON_I_LABEL, 910 HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | 911 HWMON_I_MAX | HWMON_I_MIN | HWMON_I_RESET_HISTORY | 912 HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM | 913 HWMON_I_LABEL), 914 HWMON_CHANNEL_INFO(curr, 915 HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST | 916 HWMON_C_MAX | HWMON_C_MIN | HWMON_C_RESET_HISTORY | 917 HWMON_C_MIN_ALARM | HWMON_C_MAX_ALARM | 918 HWMON_C_LABEL), 919 HWMON_CHANNEL_INFO(power, 920 HWMON_P_INPUT | HWMON_P_INPUT_LOWEST | 921 HWMON_P_INPUT_HIGHEST | HWMON_P_MAX | HWMON_P_MIN | 922 HWMON_P_RESET_HISTORY | HWMON_P_MAX_ALARM | 923 HWMON_P_MIN_ALARM | HWMON_P_LABEL), 924 HWMON_CHANNEL_INFO(temp, 925 HWMON_T_INPUT | HWMON_T_LOWEST | HWMON_T_HIGHEST | 926 HWMON_T_MAX | HWMON_T_MIN | HWMON_T_RESET_HISTORY | 927 HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | 928 HWMON_T_LABEL, 929 HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM | HWMON_T_MAX | 930 HWMON_T_MIN | HWMON_T_LABEL), 931 NULL 932 }; 933 934 static const struct hwmon_ops ltc2947_hwmon_ops = { 935 .is_visible = ltc2947_is_visible, 936 .read = ltc2947_read, 937 .write = ltc2947_write, 938 .read_string = ltc2947_read_labels, 939 }; 940 941 static const struct hwmon_chip_info ltc2947_chip_info = { 942 .ops = <c2947_hwmon_ops, 943 .info = ltc2947_info, 944 }; 945 946 /* energy attributes are 6bytes wide so we need u64 */ 947 static SENSOR_DEVICE_ATTR(energy1_input, 0444, ltc2947_show_value, NULL, 948 LTC2947_REG_ENERGY1); 949 static SENSOR_DEVICE_ATTR(energy2_input, 0444, ltc2947_show_value, NULL, 950 LTC2947_REG_ENERGY2); 951 952 static struct attribute *ltc2947_attrs[] = { 953 &sensor_dev_attr_energy1_input.dev_attr.attr, 954 &sensor_dev_attr_energy2_input.dev_attr.attr, 955 NULL, 956 }; 957 ATTRIBUTE_GROUPS(ltc2947); 958 959 static void ltc2947_clk_disable(void *data) 960 { 961 struct clk *extclk = data; 962 963 clk_disable_unprepare(extclk); 964 } 965 966 static int ltc2947_setup(struct ltc2947_data *st) 967 { 968 int ret; 969 struct clk *extclk; 970 u32 dummy, deadband, pol; 971 u32 accum[2]; 972 973 /* clear status register by reading it */ 974 ret = regmap_read(st->map, LTC2947_REG_STATUS, &dummy); 975 if (ret) 976 return ret; 977 /* 978 * Set max/min for power here since the default values x scale 979 * would overflow on 32bit arch 980 */ 981 ret = ltc2947_val_write(st, LTC2947_REG_POWER_THRE_H, LTC2947_PAGE1, 2, 982 POWER_MAX / 200000); 983 if (ret) 984 return ret; 985 986 ret = ltc2947_val_write(st, LTC2947_REG_POWER_THRE_L, LTC2947_PAGE1, 2, 987 POWER_MIN / 200000); 988 if (ret) 989 return ret; 990 991 /* check external clock presence */ 992 extclk = devm_clk_get_optional(st->dev, NULL); 993 if (IS_ERR(extclk)) 994 return dev_err_probe(st->dev, PTR_ERR(extclk), 995 "Failed to get external clock\n"); 996 997 if (extclk) { 998 unsigned long rate_hz; 999 u8 pre = 0, div, tbctl; 1000 u64 aux; 1001 1002 /* let's calculate and set the right valus in TBCTL */ 1003 rate_hz = clk_get_rate(extclk); 1004 if (rate_hz < LTC2947_CLK_MIN || rate_hz > LTC2947_CLK_MAX) { 1005 dev_err(st->dev, "Invalid rate:%lu for external clock", 1006 rate_hz); 1007 return -EINVAL; 1008 } 1009 1010 ret = clk_prepare_enable(extclk); 1011 if (ret) 1012 return ret; 1013 1014 ret = devm_add_action_or_reset(st->dev, ltc2947_clk_disable, 1015 extclk); 1016 if (ret) 1017 return ret; 1018 /* as in table 1 of the datasheet */ 1019 if (rate_hz >= LTC2947_CLK_MIN && rate_hz <= 1000000) 1020 pre = 0; 1021 else if (rate_hz > 1000000 && rate_hz <= 2000000) 1022 pre = 1; 1023 else if (rate_hz > 2000000 && rate_hz <= 4000000) 1024 pre = 2; 1025 else if (rate_hz > 4000000 && rate_hz <= 8000000) 1026 pre = 3; 1027 else if (rate_hz > 8000000 && rate_hz <= 16000000) 1028 pre = 4; 1029 else if (rate_hz > 16000000 && rate_hz <= LTC2947_CLK_MAX) 1030 pre = 5; 1031 /* 1032 * Div is given by: 1033 * floor(fref / (2^PRE * 32768)) 1034 */ 1035 div = rate_hz / ((1 << pre) * 32768); 1036 tbctl = LTC2947_PRE(pre) | LTC2947_DIV(div); 1037 1038 ret = regmap_write(st->map, LTC2947_REG_TBCTL, tbctl); 1039 if (ret) 1040 return ret; 1041 /* 1042 * The energy lsb is given by (in W*s): 1043 * 06416 * (1/fref) * 2^PRE * (DIV + 1) 1044 * The value is multiplied by 10E9 1045 */ 1046 aux = (div + 1) * ((1 << pre) * 641600000ULL); 1047 st->lsb_energy = DIV_ROUND_CLOSEST_ULL(aux, rate_hz); 1048 } else { 1049 /* 19.89E-6 * 10E9 */ 1050 st->lsb_energy = 19890; 1051 } 1052 ret = of_property_read_u32_array(st->dev->of_node, 1053 "adi,accumulator-ctl-pol", accum, 1054 ARRAY_SIZE(accum)); 1055 if (!ret) { 1056 u32 accum_reg = LTC2947_ACCUM_POL_1(accum[0]) | 1057 LTC2947_ACCUM_POL_2(accum[1]); 1058 1059 ret = regmap_write(st->map, LTC2947_REG_ACCUM_POL, accum_reg); 1060 if (ret) 1061 return ret; 1062 } 1063 ret = of_property_read_u32(st->dev->of_node, 1064 "adi,accumulation-deadband-microamp", 1065 &deadband); 1066 if (!ret) { 1067 /* the LSB is the same as the current, so 3mA */ 1068 ret = regmap_write(st->map, LTC2947_REG_ACCUM_DEADBAND, 1069 deadband / (1000 * 3)); 1070 if (ret) 1071 return ret; 1072 } 1073 /* check gpio cfg */ 1074 ret = of_property_read_u32(st->dev->of_node, "adi,gpio-out-pol", &pol); 1075 if (!ret) { 1076 /* setup GPIO as output */ 1077 u32 gpio_ctl = LTC2947_GPIO_EN(1) | LTC2947_GPIO_FAN_EN(1) | 1078 LTC2947_GPIO_FAN_POL(pol); 1079 1080 st->gpio_out = true; 1081 ret = regmap_write(st->map, LTC2947_REG_GPIOSTATCTL, gpio_ctl); 1082 if (ret) 1083 return ret; 1084 } 1085 ret = of_property_read_u32_array(st->dev->of_node, "adi,gpio-in-accum", 1086 accum, ARRAY_SIZE(accum)); 1087 if (!ret) { 1088 /* 1089 * Setup the accum options. The gpioctl is already defined as 1090 * input by default. 1091 */ 1092 u32 accum_val = LTC2947_ACCUM_POL_1(accum[0]) | 1093 LTC2947_ACCUM_POL_2(accum[1]); 1094 1095 if (st->gpio_out) { 1096 dev_err(st->dev, 1097 "Cannot have input gpio config if already configured as output"); 1098 return -EINVAL; 1099 } 1100 1101 ret = regmap_write(st->map, LTC2947_REG_GPIO_ACCUM, accum_val); 1102 if (ret) 1103 return ret; 1104 } 1105 1106 /* set continuos mode */ 1107 return regmap_update_bits(st->map, LTC2947_REG_CTRL, 1108 LTC2947_CONT_MODE_MASK, LTC2947_CONT_MODE(1)); 1109 } 1110 1111 int ltc2947_core_probe(struct regmap *map, const char *name) 1112 { 1113 struct ltc2947_data *st; 1114 struct device *dev = regmap_get_device(map); 1115 struct device *hwmon; 1116 int ret; 1117 1118 st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); 1119 if (!st) 1120 return -ENOMEM; 1121 1122 st->map = map; 1123 st->dev = dev; 1124 dev_set_drvdata(dev, st); 1125 mutex_init(&st->lock); 1126 1127 ret = ltc2947_setup(st); 1128 if (ret) 1129 return ret; 1130 1131 hwmon = devm_hwmon_device_register_with_info(dev, name, st, 1132 <c2947_chip_info, 1133 ltc2947_groups); 1134 return PTR_ERR_OR_ZERO(hwmon); 1135 } 1136 EXPORT_SYMBOL_GPL(ltc2947_core_probe); 1137 1138 static int __maybe_unused ltc2947_resume(struct device *dev) 1139 { 1140 struct ltc2947_data *st = dev_get_drvdata(dev); 1141 u32 ctrl = 0; 1142 int ret; 1143 1144 /* dummy read to wake the device */ 1145 ret = regmap_read(st->map, LTC2947_REG_CTRL, &ctrl); 1146 if (ret) 1147 return ret; 1148 /* 1149 * Wait for the device. It takes 100ms to wake up so, 10ms extra 1150 * should be enough. 1151 */ 1152 msleep(110); 1153 ret = regmap_read(st->map, LTC2947_REG_CTRL, &ctrl); 1154 if (ret) 1155 return ret; 1156 /* ctrl should be 0 */ 1157 if (ctrl != 0) { 1158 dev_err(st->dev, "Device failed to wake up, ctl:%02X\n", ctrl); 1159 return -ETIMEDOUT; 1160 } 1161 1162 /* set continuous mode */ 1163 return regmap_update_bits(st->map, LTC2947_REG_CTRL, 1164 LTC2947_CONT_MODE_MASK, LTC2947_CONT_MODE(1)); 1165 } 1166 1167 static int __maybe_unused ltc2947_suspend(struct device *dev) 1168 { 1169 struct ltc2947_data *st = dev_get_drvdata(dev); 1170 1171 return regmap_update_bits(st->map, LTC2947_REG_CTRL, 1172 LTC2947_SHUTDOWN_MASK, 1); 1173 } 1174 1175 SIMPLE_DEV_PM_OPS(ltc2947_pm_ops, ltc2947_suspend, ltc2947_resume); 1176 EXPORT_SYMBOL_GPL(ltc2947_pm_ops); 1177 1178 const struct of_device_id ltc2947_of_match[] = { 1179 { .compatible = "adi,ltc2947" }, 1180 {} 1181 }; 1182 EXPORT_SYMBOL_GPL(ltc2947_of_match); 1183 MODULE_DEVICE_TABLE(of, ltc2947_of_match); 1184 1185 MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>"); 1186 MODULE_DESCRIPTION("LTC2947 power and energy monitor core driver"); 1187 MODULE_LICENSE("GPL"); 1188