1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h/17h 4 * processor hardware monitoring 5 * 6 * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de> 7 * Copyright (c) 2020 Guenter Roeck <linux@roeck-us.net> 8 * 9 * Implementation notes: 10 * - CCD register address information as well as the calculation to 11 * convert raw register values is from https://github.com/ocerman/zenpower. 12 * The information is not confirmed from chip datasheets, but experiments 13 * suggest that it provides reasonable temperature values. 14 */ 15 16 #include <linux/bitops.h> 17 #include <linux/err.h> 18 #include <linux/hwmon.h> 19 #include <linux/init.h> 20 #include <linux/module.h> 21 #include <linux/pci.h> 22 #include <linux/pci_ids.h> 23 #include <asm/amd_node.h> 24 #include <asm/processor.h> 25 26 MODULE_DESCRIPTION("AMD Family 10h+ CPU core temperature monitor"); 27 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>"); 28 MODULE_LICENSE("GPL"); 29 30 static bool force; 31 module_param(force, bool, 0444); 32 MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); 33 34 /* Provide lock for writing to NB_SMU_IND_ADDR */ 35 static DEFINE_MUTEX(nb_smu_ind_mutex); 36 37 #ifndef PCI_DEVICE_ID_AMD_15H_M70H_NB_F3 38 #define PCI_DEVICE_ID_AMD_15H_M70H_NB_F3 0x15b3 39 #endif 40 41 /* CPUID function 0x80000001, ebx */ 42 #define CPUID_PKGTYPE_MASK GENMASK(31, 28) 43 #define CPUID_PKGTYPE_F 0x00000000 44 #define CPUID_PKGTYPE_AM2R2_AM3 0x10000000 45 46 /* DRAM controller (PCI function 2) */ 47 #define REG_DCT0_CONFIG_HIGH 0x094 48 #define DDR3_MODE BIT(8) 49 50 /* miscellaneous (PCI function 3) */ 51 #define REG_HARDWARE_THERMAL_CONTROL 0x64 52 #define HTC_ENABLE BIT(0) 53 54 #define REG_REPORTED_TEMPERATURE 0xa4 55 56 #define REG_NORTHBRIDGE_CAPABILITIES 0xe8 57 #define NB_CAP_HTC BIT(10) 58 59 /* 60 * For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL 61 * and REG_REPORTED_TEMPERATURE have been moved to 62 * D0F0xBC_xD820_0C64 [Hardware Temperature Control] 63 * D0F0xBC_xD820_0CA4 [Reported Temperature Control] 64 */ 65 #define F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET 0xd8200c64 66 #define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET 0xd8200ca4 67 68 /* Common for Zen CPU families (Family 17h and 18h and 19h and 1Ah) */ 69 #define ZEN_REPORTED_TEMP_CTRL_BASE 0x00059800 70 71 #define ZEN_CCD_TEMP(offset, x) (ZEN_REPORTED_TEMP_CTRL_BASE + \ 72 (offset) + ((x) * 4)) 73 #define ZEN_CCD_TEMP_VALID BIT(11) 74 #define ZEN_CCD_TEMP_MASK GENMASK(10, 0) 75 76 #define ZEN_CUR_TEMP_SHIFT 21 77 #define ZEN_CUR_TEMP_RANGE_SEL_MASK BIT(19) 78 #define ZEN_CUR_TEMP_TJ_SEL_MASK GENMASK(17, 16) 79 80 /* 81 * AMD's Industrial processor 3255 supports temperature from -40 deg to 105 deg Celsius. 82 * Use the model name to identify 3255 CPUs and set a flag to display negative temperature. 83 * Do not round off to zero for negative Tctl or Tdie values if the flag is set 84 */ 85 #define AMD_I3255_STR "3255" 86 87 struct k10temp_data { 88 struct pci_dev *pdev; 89 void (*read_htcreg)(struct pci_dev *pdev, u32 *regval); 90 void (*read_tempreg)(struct pci_dev *pdev, u32 *regval); 91 int temp_offset; 92 u32 temp_adjust_mask; 93 u32 show_temp; 94 bool is_zen; 95 u32 ccd_offset; 96 bool disp_negative; 97 }; 98 99 #define TCTL_BIT 0 100 #define TDIE_BIT 1 101 #define TCCD_BIT(x) ((x) + 2) 102 103 #define HAVE_TEMP(d, channel) ((d)->show_temp & BIT(channel)) 104 105 struct tctl_offset { 106 u8 model; 107 char const *id; 108 int offset; 109 }; 110 111 static const struct tctl_offset tctl_offset_table[] = { 112 { 0x17, "AMD Ryzen 5 1600X", 20000 }, 113 { 0x17, "AMD Ryzen 7 1700X", 20000 }, 114 { 0x17, "AMD Ryzen 7 1800X", 20000 }, 115 { 0x17, "AMD Ryzen 7 2700X", 10000 }, 116 { 0x17, "AMD Ryzen Threadripper 19", 27000 }, /* 19{00,20,50}X */ 117 { 0x17, "AMD Ryzen Threadripper 29", 27000 }, /* 29{20,50,70,90}[W]X */ 118 }; 119 120 static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval) 121 { 122 pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval); 123 } 124 125 static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval) 126 { 127 pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval); 128 } 129 130 static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn, 131 unsigned int base, int offset, u32 *val) 132 { 133 mutex_lock(&nb_smu_ind_mutex); 134 pci_bus_write_config_dword(pdev->bus, devfn, 135 base, offset); 136 pci_bus_read_config_dword(pdev->bus, devfn, 137 base + 4, val); 138 mutex_unlock(&nb_smu_ind_mutex); 139 } 140 141 static void read_htcreg_nb_f15(struct pci_dev *pdev, u32 *regval) 142 { 143 amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8, 144 F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET, regval); 145 } 146 147 static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval) 148 { 149 amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8, 150 F15H_M60H_REPORTED_TEMP_CTRL_OFFSET, regval); 151 } 152 153 static u16 amd_pci_dev_to_node_id(struct pci_dev *pdev) 154 { 155 return PCI_SLOT(pdev->devfn) - AMD_NODE0_PCI_SLOT; 156 } 157 158 static void read_tempreg_nb_zen(struct pci_dev *pdev, u32 *regval) 159 { 160 if (amd_smn_read(amd_pci_dev_to_node_id(pdev), 161 ZEN_REPORTED_TEMP_CTRL_BASE, regval)) 162 *regval = 0; 163 } 164 165 static int read_ccd_temp_reg(struct k10temp_data *data, int ccd, u32 *regval) 166 { 167 u16 node_id = amd_pci_dev_to_node_id(data->pdev); 168 169 return amd_smn_read(node_id, ZEN_CCD_TEMP(data->ccd_offset, ccd), regval); 170 } 171 172 static long get_raw_temp(struct k10temp_data *data) 173 { 174 u32 regval; 175 long temp; 176 177 data->read_tempreg(data->pdev, ®val); 178 temp = (regval >> ZEN_CUR_TEMP_SHIFT) * 125; 179 if ((regval & data->temp_adjust_mask) || 180 (regval & ZEN_CUR_TEMP_TJ_SEL_MASK) == ZEN_CUR_TEMP_TJ_SEL_MASK) 181 temp -= 49000; 182 return temp; 183 } 184 185 static const char *k10temp_temp_label[] = { 186 "Tctl", 187 "Tdie", 188 "Tccd1", 189 "Tccd2", 190 "Tccd3", 191 "Tccd4", 192 "Tccd5", 193 "Tccd6", 194 "Tccd7", 195 "Tccd8", 196 "Tccd9", 197 "Tccd10", 198 "Tccd11", 199 "Tccd12", 200 }; 201 202 static int k10temp_read_labels(struct device *dev, 203 enum hwmon_sensor_types type, 204 u32 attr, int channel, const char **str) 205 { 206 switch (type) { 207 case hwmon_temp: 208 *str = k10temp_temp_label[channel]; 209 break; 210 default: 211 return -EOPNOTSUPP; 212 } 213 return 0; 214 } 215 216 static int k10temp_read_temp(struct device *dev, u32 attr, int channel, 217 long *val) 218 { 219 struct k10temp_data *data = dev_get_drvdata(dev); 220 int ret = -EOPNOTSUPP; 221 u32 regval; 222 223 switch (attr) { 224 case hwmon_temp_input: 225 switch (channel) { 226 case 0: /* Tctl */ 227 *val = get_raw_temp(data); 228 if (*val < 0 && !data->disp_negative) 229 *val = 0; 230 break; 231 case 1: /* Tdie */ 232 *val = get_raw_temp(data) - data->temp_offset; 233 if (*val < 0 && !data->disp_negative) 234 *val = 0; 235 break; 236 case 2 ... 13: /* Tccd{1-12} */ 237 ret = read_ccd_temp_reg(data, channel - 2, ®val); 238 239 if (ret) 240 return ret; 241 242 *val = (regval & ZEN_CCD_TEMP_MASK) * 125 - 49000; 243 break; 244 default: 245 return ret; 246 } 247 break; 248 case hwmon_temp_max: 249 *val = 70 * 1000; 250 break; 251 case hwmon_temp_crit: 252 data->read_htcreg(data->pdev, ®val); 253 *val = ((regval >> 16) & 0x7f) * 500 + 52000; 254 break; 255 case hwmon_temp_crit_hyst: 256 data->read_htcreg(data->pdev, ®val); 257 *val = (((regval >> 16) & 0x7f) 258 - ((regval >> 24) & 0xf)) * 500 + 52000; 259 break; 260 default: 261 return ret; 262 } 263 return 0; 264 } 265 266 static int k10temp_read(struct device *dev, enum hwmon_sensor_types type, 267 u32 attr, int channel, long *val) 268 { 269 switch (type) { 270 case hwmon_temp: 271 return k10temp_read_temp(dev, attr, channel, val); 272 default: 273 return -EOPNOTSUPP; 274 } 275 } 276 277 static umode_t k10temp_is_visible(const void *drvdata, 278 enum hwmon_sensor_types type, 279 u32 attr, int channel) 280 { 281 const struct k10temp_data *data = drvdata; 282 struct pci_dev *pdev = data->pdev; 283 u32 reg; 284 285 switch (type) { 286 case hwmon_temp: 287 switch (attr) { 288 case hwmon_temp_input: 289 if (!HAVE_TEMP(data, channel)) 290 return 0; 291 break; 292 case hwmon_temp_max: 293 if (channel || data->is_zen) 294 return 0; 295 break; 296 case hwmon_temp_crit: 297 case hwmon_temp_crit_hyst: 298 if (channel || !data->read_htcreg) 299 return 0; 300 301 pci_read_config_dword(pdev, 302 REG_NORTHBRIDGE_CAPABILITIES, 303 ®); 304 if (!(reg & NB_CAP_HTC)) 305 return 0; 306 307 data->read_htcreg(data->pdev, ®); 308 if (!(reg & HTC_ENABLE)) 309 return 0; 310 break; 311 case hwmon_temp_label: 312 /* Show temperature labels only on Zen CPUs */ 313 if (!data->is_zen || !HAVE_TEMP(data, channel)) 314 return 0; 315 break; 316 default: 317 return 0; 318 } 319 break; 320 default: 321 return 0; 322 } 323 return 0444; 324 } 325 326 static bool has_erratum_319(struct pci_dev *pdev) 327 { 328 u32 pkg_type, reg_dram_cfg; 329 330 if (boot_cpu_data.x86 != 0x10) 331 return false; 332 333 /* 334 * Erratum 319: The thermal sensor of Socket F/AM2+ processors 335 * may be unreliable. 336 */ 337 pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK; 338 if (pkg_type == CPUID_PKGTYPE_F) 339 return true; 340 if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3) 341 return false; 342 343 /* DDR3 memory implies socket AM3, which is good */ 344 pci_bus_read_config_dword(pdev->bus, 345 PCI_DEVFN(PCI_SLOT(pdev->devfn), 2), 346 REG_DCT0_CONFIG_HIGH, ®_dram_cfg); 347 if (reg_dram_cfg & DDR3_MODE) 348 return false; 349 350 /* 351 * Unfortunately it is possible to run a socket AM3 CPU with DDR2 352 * memory. We blacklist all the cores which do exist in socket AM2+ 353 * format. It still isn't perfect, as RB-C2 cores exist in both AM2+ 354 * and AM3 formats, but that's the best we can do. 355 */ 356 return boot_cpu_data.x86_model < 4 || 357 (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2); 358 } 359 360 static const struct hwmon_channel_info * const k10temp_info[] = { 361 HWMON_CHANNEL_INFO(temp, 362 HWMON_T_INPUT | HWMON_T_MAX | 363 HWMON_T_CRIT | HWMON_T_CRIT_HYST | 364 HWMON_T_LABEL, 365 HWMON_T_INPUT | HWMON_T_LABEL, 366 HWMON_T_INPUT | HWMON_T_LABEL, 367 HWMON_T_INPUT | HWMON_T_LABEL, 368 HWMON_T_INPUT | HWMON_T_LABEL, 369 HWMON_T_INPUT | HWMON_T_LABEL, 370 HWMON_T_INPUT | HWMON_T_LABEL, 371 HWMON_T_INPUT | HWMON_T_LABEL, 372 HWMON_T_INPUT | HWMON_T_LABEL, 373 HWMON_T_INPUT | HWMON_T_LABEL, 374 HWMON_T_INPUT | HWMON_T_LABEL, 375 HWMON_T_INPUT | HWMON_T_LABEL, 376 HWMON_T_INPUT | HWMON_T_LABEL, 377 HWMON_T_INPUT | HWMON_T_LABEL), 378 NULL 379 }; 380 381 static const struct hwmon_ops k10temp_hwmon_ops = { 382 .is_visible = k10temp_is_visible, 383 .read = k10temp_read, 384 .read_string = k10temp_read_labels, 385 }; 386 387 static const struct hwmon_chip_info k10temp_chip_info = { 388 .ops = &k10temp_hwmon_ops, 389 .info = k10temp_info, 390 }; 391 392 static void k10temp_get_ccd_support(struct k10temp_data *data, int limit) 393 { 394 u32 regval; 395 int i; 396 397 for (i = 0; i < limit; i++) { 398 /* 399 * Ignore inaccessible CCDs. 400 * 401 * Some systems will return a register value of 0, and the TEMP_VALID 402 * bit check below will naturally fail. 403 * 404 * Other systems will return a PCI_ERROR_RESPONSE (0xFFFFFFFF) for 405 * the register value. And this will incorrectly pass the TEMP_VALID 406 * bit check. 407 */ 408 if (read_ccd_temp_reg(data, i, ®val)) 409 continue; 410 411 if (regval & ZEN_CCD_TEMP_VALID) 412 data->show_temp |= BIT(TCCD_BIT(i)); 413 } 414 } 415 416 static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) 417 { 418 int unreliable = has_erratum_319(pdev); 419 struct device *dev = &pdev->dev; 420 struct k10temp_data *data; 421 struct device *hwmon_dev; 422 int i; 423 424 if (unreliable) { 425 if (!force) { 426 dev_err(dev, 427 "unreliable CPU thermal sensor; monitoring disabled\n"); 428 return -ENODEV; 429 } 430 dev_warn(dev, 431 "unreliable CPU thermal sensor; check erratum 319\n"); 432 } 433 434 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); 435 if (!data) 436 return -ENOMEM; 437 438 data->pdev = pdev; 439 data->show_temp |= BIT(TCTL_BIT); /* Always show Tctl */ 440 441 if (boot_cpu_data.x86 == 0x17 && 442 strstr(boot_cpu_data.x86_model_id, AMD_I3255_STR)) { 443 data->disp_negative = true; 444 } 445 446 data->is_zen = cpu_feature_enabled(X86_FEATURE_ZEN); 447 if (data->is_zen) { 448 data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK; 449 data->read_tempreg = read_tempreg_nb_zen; 450 } else if (boot_cpu_data.x86 == 0x15 && 451 ((boot_cpu_data.x86_model & 0xf0) == 0x60 || 452 (boot_cpu_data.x86_model & 0xf0) == 0x70)) { 453 data->read_htcreg = read_htcreg_nb_f15; 454 data->read_tempreg = read_tempreg_nb_f15; 455 } else { 456 data->read_htcreg = read_htcreg_pci; 457 data->read_tempreg = read_tempreg_pci; 458 } 459 460 if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) { 461 switch (boot_cpu_data.x86_model) { 462 case 0x1: /* Zen */ 463 case 0x8: /* Zen+ */ 464 case 0x11: /* Zen APU */ 465 case 0x18: /* Zen+ APU */ 466 data->ccd_offset = 0x154; 467 k10temp_get_ccd_support(data, 4); 468 break; 469 case 0x31: /* Zen2 Threadripper */ 470 case 0x60: /* Renoir */ 471 case 0x68: /* Lucienne */ 472 case 0x71: /* Zen2 */ 473 data->ccd_offset = 0x154; 474 k10temp_get_ccd_support(data, 8); 475 break; 476 case 0xa0 ... 0xaf: 477 data->ccd_offset = 0x300; 478 k10temp_get_ccd_support(data, 8); 479 break; 480 } 481 } else if (boot_cpu_data.x86 == 0x19) { 482 switch (boot_cpu_data.x86_model) { 483 case 0x0 ... 0x1: /* Zen3 SP3/TR */ 484 case 0x8: /* Zen3 TR Chagall */ 485 case 0x21: /* Zen3 Ryzen Desktop */ 486 case 0x50 ... 0x5f: /* Green Sardine */ 487 data->ccd_offset = 0x154; 488 k10temp_get_ccd_support(data, 8); 489 break; 490 case 0x40 ... 0x4f: /* Yellow Carp */ 491 data->ccd_offset = 0x300; 492 k10temp_get_ccd_support(data, 8); 493 break; 494 case 0x60 ... 0x6f: 495 case 0x70 ... 0x7f: 496 data->ccd_offset = 0x308; 497 k10temp_get_ccd_support(data, 8); 498 break; 499 case 0x10 ... 0x1f: 500 case 0xa0 ... 0xaf: 501 data->ccd_offset = 0x300; 502 k10temp_get_ccd_support(data, 12); 503 break; 504 } 505 } 506 507 for (i = 0; i < ARRAY_SIZE(tctl_offset_table); i++) { 508 const struct tctl_offset *entry = &tctl_offset_table[i]; 509 510 if (boot_cpu_data.x86 == entry->model && 511 strstr(boot_cpu_data.x86_model_id, entry->id)) { 512 data->show_temp |= BIT(TDIE_BIT); /* show Tdie */ 513 data->temp_offset = entry->offset; 514 break; 515 } 516 } 517 518 hwmon_dev = devm_hwmon_device_register_with_info(dev, "k10temp", data, 519 &k10temp_chip_info, 520 NULL); 521 return PTR_ERR_OR_ZERO(hwmon_dev); 522 } 523 524 static const struct pci_device_id k10temp_id_table[] = { 525 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, 526 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, 527 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) }, 528 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) }, 529 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) }, 530 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) }, 531 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) }, 532 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M70H_NB_F3) }, 533 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) }, 534 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) }, 535 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) }, 536 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) }, 537 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) }, 538 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) }, 539 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) }, 540 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_MA0H_DF_F3) }, 541 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) }, 542 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F3) }, 543 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) }, 544 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) }, 545 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M60H_DF_F3) }, 546 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M70H_DF_F3) }, 547 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M78H_DF_F3) }, 548 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M00H_DF_F3) }, 549 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M20H_DF_F3) }, 550 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M60H_DF_F3) }, 551 { PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) }, 552 {} 553 }; 554 MODULE_DEVICE_TABLE(pci, k10temp_id_table); 555 556 static struct pci_driver k10temp_driver = { 557 .name = "k10temp", 558 .id_table = k10temp_id_table, 559 .probe = k10temp_probe, 560 }; 561 562 module_pci_driver(k10temp_driver); 563