1 /* fschmd.c 2 * 3 * Copyright (C) 2007 - 2009 Hans de Goede <hdegoede@redhat.com> 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 18 */ 19 20 /* 21 * Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes, 22 * Scylla, Heracles, Heimdall, Hades and Syleus chips 23 * 24 * Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6 25 * (candidate) fschmd drivers: 26 * Copyright (C) 2006 Thilo Cestonaro 27 * <thilo.cestonaro.external@fujitsu-siemens.com> 28 * Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch> 29 * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de> 30 * Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de> 31 * Copyright (C) 2000 Hermann Jung <hej@odn.de> 32 */ 33 34 #include <linux/module.h> 35 #include <linux/init.h> 36 #include <linux/slab.h> 37 #include <linux/jiffies.h> 38 #include <linux/i2c.h> 39 #include <linux/hwmon.h> 40 #include <linux/hwmon-sysfs.h> 41 #include <linux/smp_lock.h> 42 #include <linux/err.h> 43 #include <linux/mutex.h> 44 #include <linux/sysfs.h> 45 #include <linux/dmi.h> 46 #include <linux/fs.h> 47 #include <linux/watchdog.h> 48 #include <linux/miscdevice.h> 49 #include <linux/uaccess.h> 50 #include <linux/kref.h> 51 52 /* Addresses to scan */ 53 static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; 54 55 /* Insmod parameters */ 56 static int nowayout = WATCHDOG_NOWAYOUT; 57 module_param(nowayout, int, 0); 58 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" 59 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); 60 61 enum chips { fscpos, fscher, fscscy, fschrc, fschmd, fschds, fscsyl }; 62 63 /* 64 * The FSCHMD registers and other defines 65 */ 66 67 /* chip identification */ 68 #define FSCHMD_REG_IDENT_0 0x00 69 #define FSCHMD_REG_IDENT_1 0x01 70 #define FSCHMD_REG_IDENT_2 0x02 71 #define FSCHMD_REG_REVISION 0x03 72 73 /* global control and status */ 74 #define FSCHMD_REG_EVENT_STATE 0x04 75 #define FSCHMD_REG_CONTROL 0x05 76 77 #define FSCHMD_CONTROL_ALERT_LED 0x01 78 79 /* watchdog */ 80 static const u8 FSCHMD_REG_WDOG_CONTROL[7] = 81 { 0x21, 0x21, 0x21, 0x21, 0x21, 0x28, 0x28 }; 82 static const u8 FSCHMD_REG_WDOG_STATE[7] = 83 { 0x23, 0x23, 0x23, 0x23, 0x23, 0x29, 0x29 }; 84 static const u8 FSCHMD_REG_WDOG_PRESET[7] = 85 { 0x28, 0x28, 0x28, 0x28, 0x28, 0x2a, 0x2a }; 86 87 #define FSCHMD_WDOG_CONTROL_TRIGGER 0x10 88 #define FSCHMD_WDOG_CONTROL_STARTED 0x10 /* the same as trigger */ 89 #define FSCHMD_WDOG_CONTROL_STOP 0x20 90 #define FSCHMD_WDOG_CONTROL_RESOLUTION 0x40 91 92 #define FSCHMD_WDOG_STATE_CARDRESET 0x02 93 94 /* voltages, weird order is to keep the same order as the old drivers */ 95 static const u8 FSCHMD_REG_VOLT[7][6] = { 96 { 0x45, 0x42, 0x48 }, /* pos */ 97 { 0x45, 0x42, 0x48 }, /* her */ 98 { 0x45, 0x42, 0x48 }, /* scy */ 99 { 0x45, 0x42, 0x48 }, /* hrc */ 100 { 0x45, 0x42, 0x48 }, /* hmd */ 101 { 0x21, 0x20, 0x22 }, /* hds */ 102 { 0x21, 0x20, 0x22, 0x23, 0x24, 0x25 }, /* syl */ 103 }; 104 105 static const int FSCHMD_NO_VOLT_SENSORS[7] = { 3, 3, 3, 3, 3, 3, 6 }; 106 107 /* minimum pwm at which the fan is driven (pwm can by increased depending on 108 the temp. Notice that for the scy some fans share there minimum speed. 109 Also notice that with the scy the sensor order is different than with the 110 other chips, this order was in the 2.4 driver and kept for consistency. */ 111 static const u8 FSCHMD_REG_FAN_MIN[7][7] = { 112 { 0x55, 0x65 }, /* pos */ 113 { 0x55, 0x65, 0xb5 }, /* her */ 114 { 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 }, /* scy */ 115 { 0x55, 0x65, 0xa5, 0xb5 }, /* hrc */ 116 { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hmd */ 117 { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hds */ 118 { 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb4 }, /* syl */ 119 }; 120 121 /* actual fan speed */ 122 static const u8 FSCHMD_REG_FAN_ACT[7][7] = { 123 { 0x0e, 0x6b, 0xab }, /* pos */ 124 { 0x0e, 0x6b, 0xbb }, /* her */ 125 { 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb }, /* scy */ 126 { 0x0e, 0x6b, 0xab, 0xbb }, /* hrc */ 127 { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hmd */ 128 { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hds */ 129 { 0x57, 0x67, 0x77, 0x87, 0x97, 0xa7, 0xb7 }, /* syl */ 130 }; 131 132 /* fan status registers */ 133 static const u8 FSCHMD_REG_FAN_STATE[7][7] = { 134 { 0x0d, 0x62, 0xa2 }, /* pos */ 135 { 0x0d, 0x62, 0xb2 }, /* her */ 136 { 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 }, /* scy */ 137 { 0x0d, 0x62, 0xa2, 0xb2 }, /* hrc */ 138 { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hmd */ 139 { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hds */ 140 { 0x50, 0x60, 0x70, 0x80, 0x90, 0xa0, 0xb0 }, /* syl */ 141 }; 142 143 /* fan ripple / divider registers */ 144 static const u8 FSCHMD_REG_FAN_RIPPLE[7][7] = { 145 { 0x0f, 0x6f, 0xaf }, /* pos */ 146 { 0x0f, 0x6f, 0xbf }, /* her */ 147 { 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf }, /* scy */ 148 { 0x0f, 0x6f, 0xaf, 0xbf }, /* hrc */ 149 { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hmd */ 150 { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hds */ 151 { 0x56, 0x66, 0x76, 0x86, 0x96, 0xa6, 0xb6 }, /* syl */ 152 }; 153 154 static const int FSCHMD_NO_FAN_SENSORS[7] = { 3, 3, 6, 4, 5, 5, 7 }; 155 156 /* Fan status register bitmasks */ 157 #define FSCHMD_FAN_ALARM 0x04 /* called fault by FSC! */ 158 #define FSCHMD_FAN_NOT_PRESENT 0x08 159 #define FSCHMD_FAN_DISABLED 0x80 160 161 162 /* actual temperature registers */ 163 static const u8 FSCHMD_REG_TEMP_ACT[7][11] = { 164 { 0x64, 0x32, 0x35 }, /* pos */ 165 { 0x64, 0x32, 0x35 }, /* her */ 166 { 0x64, 0xD0, 0x32, 0x35 }, /* scy */ 167 { 0x64, 0x32, 0x35 }, /* hrc */ 168 { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hmd */ 169 { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hds */ 170 { 0x58, 0x68, 0x78, 0x88, 0x98, 0xa8, /* syl */ 171 0xb8, 0xc8, 0xd8, 0xe8, 0xf8 }, 172 }; 173 174 /* temperature state registers */ 175 static const u8 FSCHMD_REG_TEMP_STATE[7][11] = { 176 { 0x71, 0x81, 0x91 }, /* pos */ 177 { 0x71, 0x81, 0x91 }, /* her */ 178 { 0x71, 0xd1, 0x81, 0x91 }, /* scy */ 179 { 0x71, 0x81, 0x91 }, /* hrc */ 180 { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hmd */ 181 { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hds */ 182 { 0x59, 0x69, 0x79, 0x89, 0x99, 0xa9, /* syl */ 183 0xb9, 0xc9, 0xd9, 0xe9, 0xf9 }, 184 }; 185 186 /* temperature high limit registers, FSC does not document these. Proven to be 187 there with field testing on the fscher and fschrc, already supported / used 188 in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers 189 at these addresses, but doesn't want to confirm they are the same as with 190 the fscher?? */ 191 static const u8 FSCHMD_REG_TEMP_LIMIT[7][11] = { 192 { 0, 0, 0 }, /* pos */ 193 { 0x76, 0x86, 0x96 }, /* her */ 194 { 0x76, 0xd6, 0x86, 0x96 }, /* scy */ 195 { 0x76, 0x86, 0x96 }, /* hrc */ 196 { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hmd */ 197 { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hds */ 198 { 0x5a, 0x6a, 0x7a, 0x8a, 0x9a, 0xaa, /* syl */ 199 0xba, 0xca, 0xda, 0xea, 0xfa }, 200 }; 201 202 /* These were found through experimenting with an fscher, currently they are 203 not used, but we keep them around for future reference. 204 On the fscsyl AUTOP1 lives at 0x#c (so 0x5c for fan1, 0x6c for fan2, etc), 205 AUTOP2 lives at 0x#e, and 0x#1 is a bitmask defining which temps influence 206 the fan speed. 207 static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 }; 208 static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; */ 209 210 static const int FSCHMD_NO_TEMP_SENSORS[7] = { 3, 3, 4, 3, 5, 5, 11 }; 211 212 /* temp status register bitmasks */ 213 #define FSCHMD_TEMP_WORKING 0x01 214 #define FSCHMD_TEMP_ALERT 0x02 215 #define FSCHMD_TEMP_DISABLED 0x80 216 /* there only really is an alarm if the sensor is working and alert == 1 */ 217 #define FSCHMD_TEMP_ALARM_MASK \ 218 (FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT) 219 220 /* 221 * Functions declarations 222 */ 223 224 static int fschmd_probe(struct i2c_client *client, 225 const struct i2c_device_id *id); 226 static int fschmd_detect(struct i2c_client *client, 227 struct i2c_board_info *info); 228 static int fschmd_remove(struct i2c_client *client); 229 static struct fschmd_data *fschmd_update_device(struct device *dev); 230 231 /* 232 * Driver data (common to all clients) 233 */ 234 235 static const struct i2c_device_id fschmd_id[] = { 236 { "fscpos", fscpos }, 237 { "fscher", fscher }, 238 { "fscscy", fscscy }, 239 { "fschrc", fschrc }, 240 { "fschmd", fschmd }, 241 { "fschds", fschds }, 242 { "fscsyl", fscsyl }, 243 { } 244 }; 245 MODULE_DEVICE_TABLE(i2c, fschmd_id); 246 247 static struct i2c_driver fschmd_driver = { 248 .class = I2C_CLASS_HWMON, 249 .driver = { 250 .name = "fschmd", 251 }, 252 .probe = fschmd_probe, 253 .remove = fschmd_remove, 254 .id_table = fschmd_id, 255 .detect = fschmd_detect, 256 .address_list = normal_i2c, 257 }; 258 259 /* 260 * Client data (each client gets its own) 261 */ 262 263 struct fschmd_data { 264 struct i2c_client *client; 265 struct device *hwmon_dev; 266 struct mutex update_lock; 267 struct mutex watchdog_lock; 268 struct list_head list; /* member of the watchdog_data_list */ 269 struct kref kref; 270 struct miscdevice watchdog_miscdev; 271 enum chips kind; 272 unsigned long watchdog_is_open; 273 char watchdog_expect_close; 274 char watchdog_name[10]; /* must be unique to avoid sysfs conflict */ 275 char valid; /* zero until following fields are valid */ 276 unsigned long last_updated; /* in jiffies */ 277 278 /* register values */ 279 u8 revision; /* chip revision */ 280 u8 global_control; /* global control register */ 281 u8 watchdog_control; /* watchdog control register */ 282 u8 watchdog_state; /* watchdog status register */ 283 u8 watchdog_preset; /* watchdog counter preset on trigger val */ 284 u8 volt[6]; /* voltage */ 285 u8 temp_act[11]; /* temperature */ 286 u8 temp_status[11]; /* status of sensor */ 287 u8 temp_max[11]; /* high temp limit, notice: undocumented! */ 288 u8 fan_act[7]; /* fans revolutions per second */ 289 u8 fan_status[7]; /* fan status */ 290 u8 fan_min[7]; /* fan min value for rps */ 291 u8 fan_ripple[7]; /* divider for rps */ 292 }; 293 294 /* Global variables to hold information read from special DMI tables, which are 295 available on FSC machines with an fscher or later chip. There is no need to 296 protect these with a lock as they are only modified from our attach function 297 which always gets called with the i2c-core lock held and never accessed 298 before the attach function is done with them. */ 299 static int dmi_mult[6] = { 490, 200, 100, 100, 200, 100 }; 300 static int dmi_offset[6] = { 0, 0, 0, 0, 0, 0 }; 301 static int dmi_vref = -1; 302 303 /* Somewhat ugly :( global data pointer list with all fschmd devices, so that 304 we can find our device data as when using misc_register there is no other 305 method to get to ones device data from the open fop. */ 306 static LIST_HEAD(watchdog_data_list); 307 /* Note this lock not only protect list access, but also data.kref access */ 308 static DEFINE_MUTEX(watchdog_data_mutex); 309 310 /* Release our data struct when we're detached from the i2c client *and* all 311 references to our watchdog device are released */ 312 static void fschmd_release_resources(struct kref *ref) 313 { 314 struct fschmd_data *data = container_of(ref, struct fschmd_data, kref); 315 kfree(data); 316 } 317 318 /* 319 * Sysfs attr show / store functions 320 */ 321 322 static ssize_t show_in_value(struct device *dev, 323 struct device_attribute *devattr, char *buf) 324 { 325 const int max_reading[3] = { 14200, 6600, 3300 }; 326 int index = to_sensor_dev_attr(devattr)->index; 327 struct fschmd_data *data = fschmd_update_device(dev); 328 329 if (data->kind == fscher || data->kind >= fschrc) 330 return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref * 331 dmi_mult[index]) / 255 + dmi_offset[index]); 332 else 333 return sprintf(buf, "%d\n", (data->volt[index] * 334 max_reading[index] + 128) / 255); 335 } 336 337 338 #define TEMP_FROM_REG(val) (((val) - 128) * 1000) 339 340 static ssize_t show_temp_value(struct device *dev, 341 struct device_attribute *devattr, char *buf) 342 { 343 int index = to_sensor_dev_attr(devattr)->index; 344 struct fschmd_data *data = fschmd_update_device(dev); 345 346 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index])); 347 } 348 349 static ssize_t show_temp_max(struct device *dev, 350 struct device_attribute *devattr, char *buf) 351 { 352 int index = to_sensor_dev_attr(devattr)->index; 353 struct fschmd_data *data = fschmd_update_device(dev); 354 355 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index])); 356 } 357 358 static ssize_t store_temp_max(struct device *dev, struct device_attribute 359 *devattr, const char *buf, size_t count) 360 { 361 int index = to_sensor_dev_attr(devattr)->index; 362 struct fschmd_data *data = dev_get_drvdata(dev); 363 long v = simple_strtol(buf, NULL, 10) / 1000; 364 365 v = SENSORS_LIMIT(v, -128, 127) + 128; 366 367 mutex_lock(&data->update_lock); 368 i2c_smbus_write_byte_data(to_i2c_client(dev), 369 FSCHMD_REG_TEMP_LIMIT[data->kind][index], v); 370 data->temp_max[index] = v; 371 mutex_unlock(&data->update_lock); 372 373 return count; 374 } 375 376 static ssize_t show_temp_fault(struct device *dev, 377 struct device_attribute *devattr, char *buf) 378 { 379 int index = to_sensor_dev_attr(devattr)->index; 380 struct fschmd_data *data = fschmd_update_device(dev); 381 382 /* bit 0 set means sensor working ok, so no fault! */ 383 if (data->temp_status[index] & FSCHMD_TEMP_WORKING) 384 return sprintf(buf, "0\n"); 385 else 386 return sprintf(buf, "1\n"); 387 } 388 389 static ssize_t show_temp_alarm(struct device *dev, 390 struct device_attribute *devattr, char *buf) 391 { 392 int index = to_sensor_dev_attr(devattr)->index; 393 struct fschmd_data *data = fschmd_update_device(dev); 394 395 if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) == 396 FSCHMD_TEMP_ALARM_MASK) 397 return sprintf(buf, "1\n"); 398 else 399 return sprintf(buf, "0\n"); 400 } 401 402 403 #define RPM_FROM_REG(val) ((val) * 60) 404 405 static ssize_t show_fan_value(struct device *dev, 406 struct device_attribute *devattr, char *buf) 407 { 408 int index = to_sensor_dev_attr(devattr)->index; 409 struct fschmd_data *data = fschmd_update_device(dev); 410 411 return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index])); 412 } 413 414 static ssize_t show_fan_div(struct device *dev, 415 struct device_attribute *devattr, char *buf) 416 { 417 int index = to_sensor_dev_attr(devattr)->index; 418 struct fschmd_data *data = fschmd_update_device(dev); 419 420 /* bits 2..7 reserved => mask with 3 */ 421 return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3)); 422 } 423 424 static ssize_t store_fan_div(struct device *dev, struct device_attribute 425 *devattr, const char *buf, size_t count) 426 { 427 u8 reg; 428 int index = to_sensor_dev_attr(devattr)->index; 429 struct fschmd_data *data = dev_get_drvdata(dev); 430 /* supported values: 2, 4, 8 */ 431 unsigned long v = simple_strtoul(buf, NULL, 10); 432 433 switch (v) { 434 case 2: v = 1; break; 435 case 4: v = 2; break; 436 case 8: v = 3; break; 437 default: 438 dev_err(dev, "fan_div value %lu not supported. " 439 "Choose one of 2, 4 or 8!\n", v); 440 return -EINVAL; 441 } 442 443 mutex_lock(&data->update_lock); 444 445 reg = i2c_smbus_read_byte_data(to_i2c_client(dev), 446 FSCHMD_REG_FAN_RIPPLE[data->kind][index]); 447 448 /* bits 2..7 reserved => mask with 0x03 */ 449 reg &= ~0x03; 450 reg |= v; 451 452 i2c_smbus_write_byte_data(to_i2c_client(dev), 453 FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg); 454 455 data->fan_ripple[index] = reg; 456 457 mutex_unlock(&data->update_lock); 458 459 return count; 460 } 461 462 static ssize_t show_fan_alarm(struct device *dev, 463 struct device_attribute *devattr, char *buf) 464 { 465 int index = to_sensor_dev_attr(devattr)->index; 466 struct fschmd_data *data = fschmd_update_device(dev); 467 468 if (data->fan_status[index] & FSCHMD_FAN_ALARM) 469 return sprintf(buf, "1\n"); 470 else 471 return sprintf(buf, "0\n"); 472 } 473 474 static ssize_t show_fan_fault(struct device *dev, 475 struct device_attribute *devattr, char *buf) 476 { 477 int index = to_sensor_dev_attr(devattr)->index; 478 struct fschmd_data *data = fschmd_update_device(dev); 479 480 if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT) 481 return sprintf(buf, "1\n"); 482 else 483 return sprintf(buf, "0\n"); 484 } 485 486 487 static ssize_t show_pwm_auto_point1_pwm(struct device *dev, 488 struct device_attribute *devattr, char *buf) 489 { 490 int index = to_sensor_dev_attr(devattr)->index; 491 struct fschmd_data *data = fschmd_update_device(dev); 492 int val = data->fan_min[index]; 493 494 /* 0 = allow turning off (except on the syl), 1-255 = 50-100% */ 495 if (val || data->kind == fscsyl) 496 val = val / 2 + 128; 497 498 return sprintf(buf, "%d\n", val); 499 } 500 501 static ssize_t store_pwm_auto_point1_pwm(struct device *dev, 502 struct device_attribute *devattr, const char *buf, size_t count) 503 { 504 int index = to_sensor_dev_attr(devattr)->index; 505 struct fschmd_data *data = dev_get_drvdata(dev); 506 unsigned long v = simple_strtoul(buf, NULL, 10); 507 508 /* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */ 509 if (v || data->kind == fscsyl) { 510 v = SENSORS_LIMIT(v, 128, 255); 511 v = (v - 128) * 2 + 1; 512 } 513 514 mutex_lock(&data->update_lock); 515 516 i2c_smbus_write_byte_data(to_i2c_client(dev), 517 FSCHMD_REG_FAN_MIN[data->kind][index], v); 518 data->fan_min[index] = v; 519 520 mutex_unlock(&data->update_lock); 521 522 return count; 523 } 524 525 526 /* The FSC hwmon family has the ability to force an attached alert led to flash 527 from software, we export this as an alert_led sysfs attr */ 528 static ssize_t show_alert_led(struct device *dev, 529 struct device_attribute *devattr, char *buf) 530 { 531 struct fschmd_data *data = fschmd_update_device(dev); 532 533 if (data->global_control & FSCHMD_CONTROL_ALERT_LED) 534 return sprintf(buf, "1\n"); 535 else 536 return sprintf(buf, "0\n"); 537 } 538 539 static ssize_t store_alert_led(struct device *dev, 540 struct device_attribute *devattr, const char *buf, size_t count) 541 { 542 u8 reg; 543 struct fschmd_data *data = dev_get_drvdata(dev); 544 unsigned long v = simple_strtoul(buf, NULL, 10); 545 546 mutex_lock(&data->update_lock); 547 548 reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL); 549 550 if (v) 551 reg |= FSCHMD_CONTROL_ALERT_LED; 552 else 553 reg &= ~FSCHMD_CONTROL_ALERT_LED; 554 555 i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg); 556 557 data->global_control = reg; 558 559 mutex_unlock(&data->update_lock); 560 561 return count; 562 } 563 564 static DEVICE_ATTR(alert_led, 0644, show_alert_led, store_alert_led); 565 566 static struct sensor_device_attribute fschmd_attr[] = { 567 SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0), 568 SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1), 569 SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2), 570 SENSOR_ATTR(in3_input, 0444, show_in_value, NULL, 3), 571 SENSOR_ATTR(in4_input, 0444, show_in_value, NULL, 4), 572 SENSOR_ATTR(in5_input, 0444, show_in_value, NULL, 5), 573 }; 574 575 static struct sensor_device_attribute fschmd_temp_attr[] = { 576 SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0), 577 SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0), 578 SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0), 579 SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0), 580 SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1), 581 SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1), 582 SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1), 583 SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1), 584 SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2), 585 SENSOR_ATTR(temp3_max, 0644, show_temp_max, store_temp_max, 2), 586 SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2), 587 SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2), 588 SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3), 589 SENSOR_ATTR(temp4_max, 0644, show_temp_max, store_temp_max, 3), 590 SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3), 591 SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3), 592 SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4), 593 SENSOR_ATTR(temp5_max, 0644, show_temp_max, store_temp_max, 4), 594 SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4), 595 SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4), 596 SENSOR_ATTR(temp6_input, 0444, show_temp_value, NULL, 5), 597 SENSOR_ATTR(temp6_max, 0644, show_temp_max, store_temp_max, 5), 598 SENSOR_ATTR(temp6_fault, 0444, show_temp_fault, NULL, 5), 599 SENSOR_ATTR(temp6_alarm, 0444, show_temp_alarm, NULL, 5), 600 SENSOR_ATTR(temp7_input, 0444, show_temp_value, NULL, 6), 601 SENSOR_ATTR(temp7_max, 0644, show_temp_max, store_temp_max, 6), 602 SENSOR_ATTR(temp7_fault, 0444, show_temp_fault, NULL, 6), 603 SENSOR_ATTR(temp7_alarm, 0444, show_temp_alarm, NULL, 6), 604 SENSOR_ATTR(temp8_input, 0444, show_temp_value, NULL, 7), 605 SENSOR_ATTR(temp8_max, 0644, show_temp_max, store_temp_max, 7), 606 SENSOR_ATTR(temp8_fault, 0444, show_temp_fault, NULL, 7), 607 SENSOR_ATTR(temp8_alarm, 0444, show_temp_alarm, NULL, 7), 608 SENSOR_ATTR(temp9_input, 0444, show_temp_value, NULL, 8), 609 SENSOR_ATTR(temp9_max, 0644, show_temp_max, store_temp_max, 8), 610 SENSOR_ATTR(temp9_fault, 0444, show_temp_fault, NULL, 8), 611 SENSOR_ATTR(temp9_alarm, 0444, show_temp_alarm, NULL, 8), 612 SENSOR_ATTR(temp10_input, 0444, show_temp_value, NULL, 9), 613 SENSOR_ATTR(temp10_max, 0644, show_temp_max, store_temp_max, 9), 614 SENSOR_ATTR(temp10_fault, 0444, show_temp_fault, NULL, 9), 615 SENSOR_ATTR(temp10_alarm, 0444, show_temp_alarm, NULL, 9), 616 SENSOR_ATTR(temp11_input, 0444, show_temp_value, NULL, 10), 617 SENSOR_ATTR(temp11_max, 0644, show_temp_max, store_temp_max, 10), 618 SENSOR_ATTR(temp11_fault, 0444, show_temp_fault, NULL, 10), 619 SENSOR_ATTR(temp11_alarm, 0444, show_temp_alarm, NULL, 10), 620 }; 621 622 static struct sensor_device_attribute fschmd_fan_attr[] = { 623 SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0), 624 SENSOR_ATTR(fan1_div, 0644, show_fan_div, store_fan_div, 0), 625 SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0), 626 SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0), 627 SENSOR_ATTR(pwm1_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, 628 store_pwm_auto_point1_pwm, 0), 629 SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1), 630 SENSOR_ATTR(fan2_div, 0644, show_fan_div, store_fan_div, 1), 631 SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1), 632 SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1), 633 SENSOR_ATTR(pwm2_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, 634 store_pwm_auto_point1_pwm, 1), 635 SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2), 636 SENSOR_ATTR(fan3_div, 0644, show_fan_div, store_fan_div, 2), 637 SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2), 638 SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2), 639 SENSOR_ATTR(pwm3_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, 640 store_pwm_auto_point1_pwm, 2), 641 SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3), 642 SENSOR_ATTR(fan4_div, 0644, show_fan_div, store_fan_div, 3), 643 SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3), 644 SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3), 645 SENSOR_ATTR(pwm4_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, 646 store_pwm_auto_point1_pwm, 3), 647 SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4), 648 SENSOR_ATTR(fan5_div, 0644, show_fan_div, store_fan_div, 4), 649 SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4), 650 SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4), 651 SENSOR_ATTR(pwm5_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, 652 store_pwm_auto_point1_pwm, 4), 653 SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5), 654 SENSOR_ATTR(fan6_div, 0644, show_fan_div, store_fan_div, 5), 655 SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5), 656 SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5), 657 SENSOR_ATTR(pwm6_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, 658 store_pwm_auto_point1_pwm, 5), 659 SENSOR_ATTR(fan7_input, 0444, show_fan_value, NULL, 6), 660 SENSOR_ATTR(fan7_div, 0644, show_fan_div, store_fan_div, 6), 661 SENSOR_ATTR(fan7_alarm, 0444, show_fan_alarm, NULL, 6), 662 SENSOR_ATTR(fan7_fault, 0444, show_fan_fault, NULL, 6), 663 SENSOR_ATTR(pwm7_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, 664 store_pwm_auto_point1_pwm, 6), 665 }; 666 667 668 /* 669 * Watchdog routines 670 */ 671 672 static int watchdog_set_timeout(struct fschmd_data *data, int timeout) 673 { 674 int ret, resolution; 675 int kind = data->kind + 1; /* 0-x array index -> 1-x module param */ 676 677 /* 2 second or 60 second resolution? */ 678 if (timeout <= 510 || kind == fscpos || kind == fscscy) 679 resolution = 2; 680 else 681 resolution = 60; 682 683 if (timeout < resolution || timeout > (resolution * 255)) 684 return -EINVAL; 685 686 mutex_lock(&data->watchdog_lock); 687 if (!data->client) { 688 ret = -ENODEV; 689 goto leave; 690 } 691 692 if (resolution == 2) 693 data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_RESOLUTION; 694 else 695 data->watchdog_control |= FSCHMD_WDOG_CONTROL_RESOLUTION; 696 697 data->watchdog_preset = DIV_ROUND_UP(timeout, resolution); 698 699 /* Write new timeout value */ 700 i2c_smbus_write_byte_data(data->client, 701 FSCHMD_REG_WDOG_PRESET[data->kind], data->watchdog_preset); 702 /* Write new control register, do not trigger! */ 703 i2c_smbus_write_byte_data(data->client, 704 FSCHMD_REG_WDOG_CONTROL[data->kind], 705 data->watchdog_control & ~FSCHMD_WDOG_CONTROL_TRIGGER); 706 707 ret = data->watchdog_preset * resolution; 708 709 leave: 710 mutex_unlock(&data->watchdog_lock); 711 return ret; 712 } 713 714 static int watchdog_get_timeout(struct fschmd_data *data) 715 { 716 int timeout; 717 718 mutex_lock(&data->watchdog_lock); 719 if (data->watchdog_control & FSCHMD_WDOG_CONTROL_RESOLUTION) 720 timeout = data->watchdog_preset * 60; 721 else 722 timeout = data->watchdog_preset * 2; 723 mutex_unlock(&data->watchdog_lock); 724 725 return timeout; 726 } 727 728 static int watchdog_trigger(struct fschmd_data *data) 729 { 730 int ret = 0; 731 732 mutex_lock(&data->watchdog_lock); 733 if (!data->client) { 734 ret = -ENODEV; 735 goto leave; 736 } 737 738 data->watchdog_control |= FSCHMD_WDOG_CONTROL_TRIGGER; 739 i2c_smbus_write_byte_data(data->client, 740 FSCHMD_REG_WDOG_CONTROL[data->kind], 741 data->watchdog_control); 742 leave: 743 mutex_unlock(&data->watchdog_lock); 744 return ret; 745 } 746 747 static int watchdog_stop(struct fschmd_data *data) 748 { 749 int ret = 0; 750 751 mutex_lock(&data->watchdog_lock); 752 if (!data->client) { 753 ret = -ENODEV; 754 goto leave; 755 } 756 757 data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED; 758 /* Don't store the stop flag in our watchdog control register copy, as 759 its a write only bit (read always returns 0) */ 760 i2c_smbus_write_byte_data(data->client, 761 FSCHMD_REG_WDOG_CONTROL[data->kind], 762 data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP); 763 leave: 764 mutex_unlock(&data->watchdog_lock); 765 return ret; 766 } 767 768 static int watchdog_open(struct inode *inode, struct file *filp) 769 { 770 struct fschmd_data *pos, *data = NULL; 771 int watchdog_is_open; 772 773 /* We get called from drivers/char/misc.c with misc_mtx hold, and we 774 call misc_register() from fschmd_probe() with watchdog_data_mutex 775 hold, as misc_register() takes the misc_mtx lock, this is a possible 776 deadlock, so we use mutex_trylock here. */ 777 if (!mutex_trylock(&watchdog_data_mutex)) 778 return -ERESTARTSYS; 779 list_for_each_entry(pos, &watchdog_data_list, list) { 780 if (pos->watchdog_miscdev.minor == iminor(inode)) { 781 data = pos; 782 break; 783 } 784 } 785 /* Note we can never not have found data, so we don't check for this */ 786 watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open); 787 if (!watchdog_is_open) 788 kref_get(&data->kref); 789 mutex_unlock(&watchdog_data_mutex); 790 791 if (watchdog_is_open) 792 return -EBUSY; 793 794 /* Start the watchdog */ 795 watchdog_trigger(data); 796 filp->private_data = data; 797 798 return nonseekable_open(inode, filp); 799 } 800 801 static int watchdog_release(struct inode *inode, struct file *filp) 802 { 803 struct fschmd_data *data = filp->private_data; 804 805 if (data->watchdog_expect_close) { 806 watchdog_stop(data); 807 data->watchdog_expect_close = 0; 808 } else { 809 watchdog_trigger(data); 810 dev_crit(&data->client->dev, 811 "unexpected close, not stopping watchdog!\n"); 812 } 813 814 clear_bit(0, &data->watchdog_is_open); 815 816 mutex_lock(&watchdog_data_mutex); 817 kref_put(&data->kref, fschmd_release_resources); 818 mutex_unlock(&watchdog_data_mutex); 819 820 return 0; 821 } 822 823 static ssize_t watchdog_write(struct file *filp, const char __user *buf, 824 size_t count, loff_t *offset) 825 { 826 int ret; 827 struct fschmd_data *data = filp->private_data; 828 829 if (count) { 830 if (!nowayout) { 831 size_t i; 832 833 /* Clear it in case it was set with a previous write */ 834 data->watchdog_expect_close = 0; 835 836 for (i = 0; i != count; i++) { 837 char c; 838 if (get_user(c, buf + i)) 839 return -EFAULT; 840 if (c == 'V') 841 data->watchdog_expect_close = 1; 842 } 843 } 844 ret = watchdog_trigger(data); 845 if (ret < 0) 846 return ret; 847 } 848 return count; 849 } 850 851 static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) 852 { 853 static struct watchdog_info ident = { 854 .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | 855 WDIOF_CARDRESET, 856 .identity = "FSC watchdog" 857 }; 858 int i, ret = 0; 859 struct fschmd_data *data = filp->private_data; 860 861 lock_kernel(); 862 switch (cmd) { 863 case WDIOC_GETSUPPORT: 864 ident.firmware_version = data->revision; 865 if (!nowayout) 866 ident.options |= WDIOF_MAGICCLOSE; 867 if (copy_to_user((void __user *)arg, &ident, sizeof(ident))) 868 ret = -EFAULT; 869 break; 870 871 case WDIOC_GETSTATUS: 872 ret = put_user(0, (int __user *)arg); 873 break; 874 875 case WDIOC_GETBOOTSTATUS: 876 if (data->watchdog_state & FSCHMD_WDOG_STATE_CARDRESET) 877 ret = put_user(WDIOF_CARDRESET, (int __user *)arg); 878 else 879 ret = put_user(0, (int __user *)arg); 880 break; 881 882 case WDIOC_KEEPALIVE: 883 ret = watchdog_trigger(data); 884 break; 885 886 case WDIOC_GETTIMEOUT: 887 i = watchdog_get_timeout(data); 888 ret = put_user(i, (int __user *)arg); 889 break; 890 891 case WDIOC_SETTIMEOUT: 892 if (get_user(i, (int __user *)arg)) { 893 ret = -EFAULT; 894 break; 895 } 896 ret = watchdog_set_timeout(data, i); 897 if (ret > 0) 898 ret = put_user(ret, (int __user *)arg); 899 break; 900 901 case WDIOC_SETOPTIONS: 902 if (get_user(i, (int __user *)arg)) { 903 ret = -EFAULT; 904 break; 905 } 906 907 if (i & WDIOS_DISABLECARD) 908 ret = watchdog_stop(data); 909 else if (i & WDIOS_ENABLECARD) 910 ret = watchdog_trigger(data); 911 else 912 ret = -EINVAL; 913 914 break; 915 default: 916 ret = -ENOTTY; 917 } 918 unlock_kernel(); 919 return ret; 920 } 921 922 static const struct file_operations watchdog_fops = { 923 .owner = THIS_MODULE, 924 .llseek = no_llseek, 925 .open = watchdog_open, 926 .release = watchdog_release, 927 .write = watchdog_write, 928 .unlocked_ioctl = watchdog_ioctl, 929 }; 930 931 932 /* 933 * Detect, register, unregister and update device functions 934 */ 935 936 /* DMI decode routine to read voltage scaling factors from special DMI tables, 937 which are available on FSC machines with an fscher or later chip. */ 938 static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy) 939 { 940 int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0; 941 942 /* dmi code ugliness, we get passed the address of the contents of 943 a complete DMI record, but in the form of a dmi_header pointer, in 944 reality this address holds header->length bytes of which the header 945 are the first 4 bytes */ 946 u8 *dmi_data = (u8 *)header; 947 948 /* We are looking for OEM-specific type 185 */ 949 if (header->type != 185) 950 return; 951 952 /* we are looking for what Siemens calls "subtype" 19, the subtype 953 is stored in byte 5 of the dmi block */ 954 if (header->length < 5 || dmi_data[4] != 19) 955 return; 956 957 /* After the subtype comes 1 unknown byte and then blocks of 5 bytes, 958 consisting of what Siemens calls an "Entity" number, followed by 959 2 16-bit words in LSB first order */ 960 for (i = 6; (i + 4) < header->length; i += 5) { 961 /* entity 1 - 3: voltage multiplier and offset */ 962 if (dmi_data[i] >= 1 && dmi_data[i] <= 3) { 963 /* Our in sensors order and the DMI order differ */ 964 const int shuffle[3] = { 1, 0, 2 }; 965 int in = shuffle[dmi_data[i] - 1]; 966 967 /* Check for twice the same entity */ 968 if (found & (1 << in)) 969 return; 970 971 mult[in] = dmi_data[i + 1] | (dmi_data[i + 2] << 8); 972 offset[in] = dmi_data[i + 3] | (dmi_data[i + 4] << 8); 973 974 found |= 1 << in; 975 } 976 977 /* entity 7: reference voltage */ 978 if (dmi_data[i] == 7) { 979 /* Check for twice the same entity */ 980 if (found & 0x08) 981 return; 982 983 vref = dmi_data[i + 1] | (dmi_data[i + 2] << 8); 984 985 found |= 0x08; 986 } 987 } 988 989 if (found == 0x0F) { 990 for (i = 0; i < 3; i++) { 991 dmi_mult[i] = mult[i] * 10; 992 dmi_offset[i] = offset[i] * 10; 993 } 994 /* According to the docs there should be separate dmi entries 995 for the mult's and offsets of in3-5 of the syl, but on 996 my test machine these are not present */ 997 dmi_mult[3] = dmi_mult[2]; 998 dmi_mult[4] = dmi_mult[1]; 999 dmi_mult[5] = dmi_mult[2]; 1000 dmi_offset[3] = dmi_offset[2]; 1001 dmi_offset[4] = dmi_offset[1]; 1002 dmi_offset[5] = dmi_offset[2]; 1003 dmi_vref = vref; 1004 } 1005 } 1006 1007 static int fschmd_detect(struct i2c_client *client, 1008 struct i2c_board_info *info) 1009 { 1010 enum chips kind; 1011 struct i2c_adapter *adapter = client->adapter; 1012 char id[4]; 1013 1014 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 1015 return -ENODEV; 1016 1017 /* Detect & Identify the chip */ 1018 id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0); 1019 id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1); 1020 id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2); 1021 id[3] = '\0'; 1022 1023 if (!strcmp(id, "PEG")) 1024 kind = fscpos; 1025 else if (!strcmp(id, "HER")) 1026 kind = fscher; 1027 else if (!strcmp(id, "SCY")) 1028 kind = fscscy; 1029 else if (!strcmp(id, "HRC")) 1030 kind = fschrc; 1031 else if (!strcmp(id, "HMD")) 1032 kind = fschmd; 1033 else if (!strcmp(id, "HDS")) 1034 kind = fschds; 1035 else if (!strcmp(id, "SYL")) 1036 kind = fscsyl; 1037 else 1038 return -ENODEV; 1039 1040 strlcpy(info->type, fschmd_id[kind].name, I2C_NAME_SIZE); 1041 1042 return 0; 1043 } 1044 1045 static int fschmd_probe(struct i2c_client *client, 1046 const struct i2c_device_id *id) 1047 { 1048 struct fschmd_data *data; 1049 const char * const names[7] = { "Poseidon", "Hermes", "Scylla", 1050 "Heracles", "Heimdall", "Hades", "Syleus" }; 1051 const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 }; 1052 int i, err; 1053 enum chips kind = id->driver_data; 1054 1055 data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL); 1056 if (!data) 1057 return -ENOMEM; 1058 1059 i2c_set_clientdata(client, data); 1060 mutex_init(&data->update_lock); 1061 mutex_init(&data->watchdog_lock); 1062 INIT_LIST_HEAD(&data->list); 1063 kref_init(&data->kref); 1064 /* Store client pointer in our data struct for watchdog usage 1065 (where the client is found through a data ptr instead of the 1066 otherway around) */ 1067 data->client = client; 1068 data->kind = kind; 1069 1070 if (kind == fscpos) { 1071 /* The Poseidon has hardwired temp limits, fill these 1072 in for the alarm resetting code */ 1073 data->temp_max[0] = 70 + 128; 1074 data->temp_max[1] = 50 + 128; 1075 data->temp_max[2] = 50 + 128; 1076 } 1077 1078 /* Read the special DMI table for fscher and newer chips */ 1079 if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) { 1080 dmi_walk(fschmd_dmi_decode, NULL); 1081 if (dmi_vref == -1) { 1082 dev_warn(&client->dev, 1083 "Couldn't get voltage scaling factors from " 1084 "BIOS DMI table, using builtin defaults\n"); 1085 dmi_vref = 33; 1086 } 1087 } 1088 1089 /* Read in some never changing registers */ 1090 data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION); 1091 data->global_control = i2c_smbus_read_byte_data(client, 1092 FSCHMD_REG_CONTROL); 1093 data->watchdog_control = i2c_smbus_read_byte_data(client, 1094 FSCHMD_REG_WDOG_CONTROL[data->kind]); 1095 data->watchdog_state = i2c_smbus_read_byte_data(client, 1096 FSCHMD_REG_WDOG_STATE[data->kind]); 1097 data->watchdog_preset = i2c_smbus_read_byte_data(client, 1098 FSCHMD_REG_WDOG_PRESET[data->kind]); 1099 1100 err = device_create_file(&client->dev, &dev_attr_alert_led); 1101 if (err) 1102 goto exit_detach; 1103 1104 for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++) { 1105 err = device_create_file(&client->dev, 1106 &fschmd_attr[i].dev_attr); 1107 if (err) 1108 goto exit_detach; 1109 } 1110 1111 for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) { 1112 /* Poseidon doesn't have TEMP_LIMIT registers */ 1113 if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show == 1114 show_temp_max) 1115 continue; 1116 1117 if (kind == fscsyl) { 1118 if (i % 4 == 0) 1119 data->temp_status[i / 4] = 1120 i2c_smbus_read_byte_data(client, 1121 FSCHMD_REG_TEMP_STATE 1122 [data->kind][i / 4]); 1123 if (data->temp_status[i / 4] & FSCHMD_TEMP_DISABLED) 1124 continue; 1125 } 1126 1127 err = device_create_file(&client->dev, 1128 &fschmd_temp_attr[i].dev_attr); 1129 if (err) 1130 goto exit_detach; 1131 } 1132 1133 for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) { 1134 /* Poseidon doesn't have a FAN_MIN register for its 3rd fan */ 1135 if (kind == fscpos && 1136 !strcmp(fschmd_fan_attr[i].dev_attr.attr.name, 1137 "pwm3_auto_point1_pwm")) 1138 continue; 1139 1140 if (kind == fscsyl) { 1141 if (i % 5 == 0) 1142 data->fan_status[i / 5] = 1143 i2c_smbus_read_byte_data(client, 1144 FSCHMD_REG_FAN_STATE 1145 [data->kind][i / 5]); 1146 if (data->fan_status[i / 5] & FSCHMD_FAN_DISABLED) 1147 continue; 1148 } 1149 1150 err = device_create_file(&client->dev, 1151 &fschmd_fan_attr[i].dev_attr); 1152 if (err) 1153 goto exit_detach; 1154 } 1155 1156 data->hwmon_dev = hwmon_device_register(&client->dev); 1157 if (IS_ERR(data->hwmon_dev)) { 1158 err = PTR_ERR(data->hwmon_dev); 1159 data->hwmon_dev = NULL; 1160 goto exit_detach; 1161 } 1162 1163 /* We take the data_mutex lock early so that watchdog_open() cannot 1164 run when misc_register() has completed, but we've not yet added 1165 our data to the watchdog_data_list (and set the default timeout) */ 1166 mutex_lock(&watchdog_data_mutex); 1167 for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) { 1168 /* Register our watchdog part */ 1169 snprintf(data->watchdog_name, sizeof(data->watchdog_name), 1170 "watchdog%c", (i == 0) ? '\0' : ('0' + i)); 1171 data->watchdog_miscdev.name = data->watchdog_name; 1172 data->watchdog_miscdev.fops = &watchdog_fops; 1173 data->watchdog_miscdev.minor = watchdog_minors[i]; 1174 err = misc_register(&data->watchdog_miscdev); 1175 if (err == -EBUSY) 1176 continue; 1177 if (err) { 1178 data->watchdog_miscdev.minor = 0; 1179 dev_err(&client->dev, 1180 "Registering watchdog chardev: %d\n", err); 1181 break; 1182 } 1183 1184 list_add(&data->list, &watchdog_data_list); 1185 watchdog_set_timeout(data, 60); 1186 dev_info(&client->dev, 1187 "Registered watchdog chardev major 10, minor: %d\n", 1188 watchdog_minors[i]); 1189 break; 1190 } 1191 if (i == ARRAY_SIZE(watchdog_minors)) { 1192 data->watchdog_miscdev.minor = 0; 1193 dev_warn(&client->dev, "Couldn't register watchdog chardev " 1194 "(due to no free minor)\n"); 1195 } 1196 mutex_unlock(&watchdog_data_mutex); 1197 1198 dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n", 1199 names[data->kind], (int) data->revision); 1200 1201 return 0; 1202 1203 exit_detach: 1204 fschmd_remove(client); /* will also free data for us */ 1205 return err; 1206 } 1207 1208 static int fschmd_remove(struct i2c_client *client) 1209 { 1210 struct fschmd_data *data = i2c_get_clientdata(client); 1211 int i; 1212 1213 /* Unregister the watchdog (if registered) */ 1214 if (data->watchdog_miscdev.minor) { 1215 misc_deregister(&data->watchdog_miscdev); 1216 if (data->watchdog_is_open) { 1217 dev_warn(&client->dev, 1218 "i2c client detached with watchdog open! " 1219 "Stopping watchdog.\n"); 1220 watchdog_stop(data); 1221 } 1222 mutex_lock(&watchdog_data_mutex); 1223 list_del(&data->list); 1224 mutex_unlock(&watchdog_data_mutex); 1225 /* Tell the watchdog code the client is gone */ 1226 mutex_lock(&data->watchdog_lock); 1227 data->client = NULL; 1228 mutex_unlock(&data->watchdog_lock); 1229 } 1230 1231 /* Check if registered in case we're called from fschmd_detect 1232 to cleanup after an error */ 1233 if (data->hwmon_dev) 1234 hwmon_device_unregister(data->hwmon_dev); 1235 1236 device_remove_file(&client->dev, &dev_attr_alert_led); 1237 for (i = 0; i < (FSCHMD_NO_VOLT_SENSORS[data->kind]); i++) 1238 device_remove_file(&client->dev, &fschmd_attr[i].dev_attr); 1239 for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) 1240 device_remove_file(&client->dev, 1241 &fschmd_temp_attr[i].dev_attr); 1242 for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) 1243 device_remove_file(&client->dev, 1244 &fschmd_fan_attr[i].dev_attr); 1245 1246 mutex_lock(&watchdog_data_mutex); 1247 kref_put(&data->kref, fschmd_release_resources); 1248 mutex_unlock(&watchdog_data_mutex); 1249 1250 return 0; 1251 } 1252 1253 static struct fschmd_data *fschmd_update_device(struct device *dev) 1254 { 1255 struct i2c_client *client = to_i2c_client(dev); 1256 struct fschmd_data *data = i2c_get_clientdata(client); 1257 int i; 1258 1259 mutex_lock(&data->update_lock); 1260 1261 if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { 1262 1263 for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) { 1264 data->temp_act[i] = i2c_smbus_read_byte_data(client, 1265 FSCHMD_REG_TEMP_ACT[data->kind][i]); 1266 data->temp_status[i] = i2c_smbus_read_byte_data(client, 1267 FSCHMD_REG_TEMP_STATE[data->kind][i]); 1268 1269 /* The fscpos doesn't have TEMP_LIMIT registers */ 1270 if (FSCHMD_REG_TEMP_LIMIT[data->kind][i]) 1271 data->temp_max[i] = i2c_smbus_read_byte_data( 1272 client, 1273 FSCHMD_REG_TEMP_LIMIT[data->kind][i]); 1274 1275 /* reset alarm if the alarm condition is gone, 1276 the chip doesn't do this itself */ 1277 if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) == 1278 FSCHMD_TEMP_ALARM_MASK && 1279 data->temp_act[i] < data->temp_max[i]) 1280 i2c_smbus_write_byte_data(client, 1281 FSCHMD_REG_TEMP_STATE[data->kind][i], 1282 data->temp_status[i]); 1283 } 1284 1285 for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) { 1286 data->fan_act[i] = i2c_smbus_read_byte_data(client, 1287 FSCHMD_REG_FAN_ACT[data->kind][i]); 1288 data->fan_status[i] = i2c_smbus_read_byte_data(client, 1289 FSCHMD_REG_FAN_STATE[data->kind][i]); 1290 data->fan_ripple[i] = i2c_smbus_read_byte_data(client, 1291 FSCHMD_REG_FAN_RIPPLE[data->kind][i]); 1292 1293 /* The fscpos third fan doesn't have a fan_min */ 1294 if (FSCHMD_REG_FAN_MIN[data->kind][i]) 1295 data->fan_min[i] = i2c_smbus_read_byte_data( 1296 client, 1297 FSCHMD_REG_FAN_MIN[data->kind][i]); 1298 1299 /* reset fan status if speed is back to > 0 */ 1300 if ((data->fan_status[i] & FSCHMD_FAN_ALARM) && 1301 data->fan_act[i]) 1302 i2c_smbus_write_byte_data(client, 1303 FSCHMD_REG_FAN_STATE[data->kind][i], 1304 data->fan_status[i]); 1305 } 1306 1307 for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++) 1308 data->volt[i] = i2c_smbus_read_byte_data(client, 1309 FSCHMD_REG_VOLT[data->kind][i]); 1310 1311 data->last_updated = jiffies; 1312 data->valid = 1; 1313 } 1314 1315 mutex_unlock(&data->update_lock); 1316 1317 return data; 1318 } 1319 1320 static int __init fschmd_init(void) 1321 { 1322 return i2c_add_driver(&fschmd_driver); 1323 } 1324 1325 static void __exit fschmd_exit(void) 1326 { 1327 i2c_del_driver(&fschmd_driver); 1328 } 1329 1330 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); 1331 MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles, Heimdall, Hades " 1332 "and Syleus driver"); 1333 MODULE_LICENSE("GPL"); 1334 1335 module_init(fschmd_init); 1336 module_exit(fschmd_exit); 1337