1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * corsair-cpro.c - Linux driver for Corsair Commander Pro 4 * Copyright (C) 2020 Marius Zachmann <mail@mariuszachmann.de> 5 * 6 * This driver uses hid reports to communicate with the device to allow hidraw userspace drivers 7 * still being used. The device does not use report ids. When using hidraw and this driver 8 * simultaniously, reports could be switched. 9 */ 10 11 #include <linux/bitops.h> 12 #include <linux/completion.h> 13 #include <linux/hid.h> 14 #include <linux/hwmon.h> 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/mutex.h> 18 #include <linux/slab.h> 19 #include <linux/types.h> 20 21 #define USB_VENDOR_ID_CORSAIR 0x1b1c 22 #define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10 23 #define USB_PRODUCT_ID_CORSAIR_1000D 0x1d00 24 25 #define OUT_BUFFER_SIZE 63 26 #define IN_BUFFER_SIZE 16 27 #define LABEL_LENGTH 11 28 #define REQ_TIMEOUT 300 29 30 #define CTL_GET_TMP_CNCT 0x10 /* 31 * returns in bytes 1-4 for each temp sensor: 32 * 0 not connected 33 * 1 connected 34 */ 35 #define CTL_GET_TMP 0x11 /* 36 * send: byte 1 is channel, rest zero 37 * rcv: returns temp for channel in centi-degree celsius 38 * in bytes 1 and 2 39 * returns 0x11 in byte 0 if no sensor is connected 40 */ 41 #define CTL_GET_VOLT 0x12 /* 42 * send: byte 1 is rail number: 0 = 12v, 1 = 5v, 2 = 3.3v 43 * rcv: returns millivolt in bytes 1,2 44 * returns error 0x10 if request is invalid 45 */ 46 #define CTL_GET_FAN_CNCT 0x20 /* 47 * returns in bytes 1-6 for each fan: 48 * 0 not connected 49 * 1 3pin 50 * 2 4pin 51 */ 52 #define CTL_GET_FAN_RPM 0x21 /* 53 * send: byte 1 is channel, rest zero 54 * rcv: returns rpm in bytes 1,2 55 */ 56 #define CTL_GET_FAN_PWM 0x22 /* 57 * send: byte 1 is channel, rest zero 58 * rcv: returns pwm in byte 1 if it was set 59 * returns error 0x12 if fan is controlled via 60 * fan_target or fan curve 61 */ 62 #define CTL_SET_FAN_FPWM 0x23 /* 63 * set fixed pwm 64 * send: byte 1 is fan number 65 * send: byte 2 is percentage from 0 - 100 66 */ 67 #define CTL_SET_FAN_TARGET 0x24 /* 68 * set target rpm 69 * send: byte 1 is fan number 70 * send: byte 2-3 is target 71 * device accepts all values from 0x00 - 0xFFFF 72 */ 73 74 #define NUM_FANS 6 75 #define NUM_TEMP_SENSORS 4 76 77 struct ccp_device { 78 struct hid_device *hdev; 79 struct device *hwmon_dev; 80 struct completion wait_input_report; 81 struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */ 82 u8 *buffer; 83 int target[6]; 84 DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS); 85 DECLARE_BITMAP(fan_cnct, NUM_FANS); 86 char fan_label[6][LABEL_LENGTH]; 87 }; 88 89 /* converts response error in buffer to errno */ 90 static int ccp_get_errno(struct ccp_device *ccp) 91 { 92 switch (ccp->buffer[0]) { 93 case 0x00: /* success */ 94 return 0; 95 case 0x01: /* called invalid command */ 96 return -EOPNOTSUPP; 97 case 0x10: /* called GET_VOLT / GET_TMP with invalid arguments */ 98 return -EINVAL; 99 case 0x11: /* requested temps of disconnected sensors */ 100 case 0x12: /* requested pwm of not pwm controlled channels */ 101 return -ENODATA; 102 default: 103 hid_dbg(ccp->hdev, "unknown device response error: %d", ccp->buffer[0]); 104 return -EIO; 105 } 106 } 107 108 /* send command, check for error in response, response in ccp->buffer */ 109 static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2, u8 byte3) 110 { 111 unsigned long t; 112 int ret; 113 114 memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); 115 ccp->buffer[0] = command; 116 ccp->buffer[1] = byte1; 117 ccp->buffer[2] = byte2; 118 ccp->buffer[3] = byte3; 119 120 reinit_completion(&ccp->wait_input_report); 121 122 ret = hid_hw_output_report(ccp->hdev, ccp->buffer, OUT_BUFFER_SIZE); 123 if (ret < 0) 124 return ret; 125 126 t = wait_for_completion_timeout(&ccp->wait_input_report, msecs_to_jiffies(REQ_TIMEOUT)); 127 if (!t) 128 return -ETIMEDOUT; 129 130 return ccp_get_errno(ccp); 131 } 132 133 static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) 134 { 135 struct ccp_device *ccp = hid_get_drvdata(hdev); 136 137 /* only copy buffer when requested */ 138 if (completion_done(&ccp->wait_input_report)) 139 return 0; 140 141 memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size)); 142 complete(&ccp->wait_input_report); 143 144 return 0; 145 } 146 147 /* requests and returns single data values depending on channel */ 148 static int get_data(struct ccp_device *ccp, int command, int channel, bool two_byte_data) 149 { 150 int ret; 151 152 mutex_lock(&ccp->mutex); 153 154 ret = send_usb_cmd(ccp, command, channel, 0, 0); 155 if (ret) 156 goto out_unlock; 157 158 ret = ccp->buffer[1]; 159 if (two_byte_data) 160 ret = (ret << 8) + ccp->buffer[2]; 161 162 out_unlock: 163 mutex_unlock(&ccp->mutex); 164 return ret; 165 } 166 167 static int set_pwm(struct ccp_device *ccp, int channel, long val) 168 { 169 int ret; 170 171 if (val < 0 || val > 255) 172 return -EINVAL; 173 174 /* The Corsair Commander Pro uses values from 0-100 */ 175 val = DIV_ROUND_CLOSEST(val * 100, 255); 176 177 mutex_lock(&ccp->mutex); 178 179 ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val, 0); 180 if (!ret) 181 ccp->target[channel] = -ENODATA; 182 183 mutex_unlock(&ccp->mutex); 184 return ret; 185 } 186 187 static int set_target(struct ccp_device *ccp, int channel, long val) 188 { 189 int ret; 190 191 val = clamp_val(val, 0, 0xFFFF); 192 ccp->target[channel] = val; 193 194 mutex_lock(&ccp->mutex); 195 ret = send_usb_cmd(ccp, CTL_SET_FAN_TARGET, channel, val >> 8, val); 196 197 mutex_unlock(&ccp->mutex); 198 return ret; 199 } 200 201 static int ccp_read_string(struct device *dev, enum hwmon_sensor_types type, 202 u32 attr, int channel, const char **str) 203 { 204 struct ccp_device *ccp = dev_get_drvdata(dev); 205 206 switch (type) { 207 case hwmon_fan: 208 switch (attr) { 209 case hwmon_fan_label: 210 *str = ccp->fan_label[channel]; 211 return 0; 212 default: 213 break; 214 } 215 break; 216 default: 217 break; 218 } 219 220 return -EOPNOTSUPP; 221 } 222 223 static int ccp_read(struct device *dev, enum hwmon_sensor_types type, 224 u32 attr, int channel, long *val) 225 { 226 struct ccp_device *ccp = dev_get_drvdata(dev); 227 int ret; 228 229 switch (type) { 230 case hwmon_temp: 231 switch (attr) { 232 case hwmon_temp_input: 233 ret = get_data(ccp, CTL_GET_TMP, channel, true); 234 if (ret < 0) 235 return ret; 236 *val = ret * 10; 237 return 0; 238 default: 239 break; 240 } 241 break; 242 case hwmon_fan: 243 switch (attr) { 244 case hwmon_fan_input: 245 ret = get_data(ccp, CTL_GET_FAN_RPM, channel, true); 246 if (ret < 0) 247 return ret; 248 *val = ret; 249 return 0; 250 case hwmon_fan_target: 251 /* how to read target values from the device is unknown */ 252 /* driver returns last set value or 0 */ 253 if (ccp->target[channel] < 0) 254 return -ENODATA; 255 *val = ccp->target[channel]; 256 return 0; 257 default: 258 break; 259 } 260 break; 261 case hwmon_pwm: 262 switch (attr) { 263 case hwmon_pwm_input: 264 ret = get_data(ccp, CTL_GET_FAN_PWM, channel, false); 265 if (ret < 0) 266 return ret; 267 *val = DIV_ROUND_CLOSEST(ret * 255, 100); 268 return 0; 269 default: 270 break; 271 } 272 break; 273 case hwmon_in: 274 switch (attr) { 275 case hwmon_in_input: 276 ret = get_data(ccp, CTL_GET_VOLT, channel, true); 277 if (ret < 0) 278 return ret; 279 *val = ret; 280 return 0; 281 default: 282 break; 283 } 284 break; 285 default: 286 break; 287 } 288 289 return -EOPNOTSUPP; 290 }; 291 292 static int ccp_write(struct device *dev, enum hwmon_sensor_types type, 293 u32 attr, int channel, long val) 294 { 295 struct ccp_device *ccp = dev_get_drvdata(dev); 296 297 switch (type) { 298 case hwmon_pwm: 299 switch (attr) { 300 case hwmon_pwm_input: 301 return set_pwm(ccp, channel, val); 302 default: 303 break; 304 } 305 break; 306 case hwmon_fan: 307 switch (attr) { 308 case hwmon_fan_target: 309 return set_target(ccp, channel, val); 310 default: 311 break; 312 } 313 break; 314 default: 315 break; 316 } 317 318 return -EOPNOTSUPP; 319 }; 320 321 static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type, 322 u32 attr, int channel) 323 { 324 const struct ccp_device *ccp = data; 325 326 switch (type) { 327 case hwmon_temp: 328 if (!test_bit(channel, ccp->temp_cnct)) 329 break; 330 331 switch (attr) { 332 case hwmon_temp_input: 333 return 0444; 334 case hwmon_temp_label: 335 return 0444; 336 default: 337 break; 338 } 339 break; 340 case hwmon_fan: 341 if (!test_bit(channel, ccp->fan_cnct)) 342 break; 343 344 switch (attr) { 345 case hwmon_fan_input: 346 return 0444; 347 case hwmon_fan_label: 348 return 0444; 349 case hwmon_fan_target: 350 return 0644; 351 default: 352 break; 353 } 354 break; 355 case hwmon_pwm: 356 if (!test_bit(channel, ccp->fan_cnct)) 357 break; 358 359 switch (attr) { 360 case hwmon_pwm_input: 361 return 0644; 362 default: 363 break; 364 } 365 break; 366 case hwmon_in: 367 switch (attr) { 368 case hwmon_in_input: 369 return 0444; 370 default: 371 break; 372 } 373 break; 374 default: 375 break; 376 } 377 378 return 0; 379 }; 380 381 static const struct hwmon_ops ccp_hwmon_ops = { 382 .is_visible = ccp_is_visible, 383 .read = ccp_read, 384 .read_string = ccp_read_string, 385 .write = ccp_write, 386 }; 387 388 static const struct hwmon_channel_info * const ccp_info[] = { 389 HWMON_CHANNEL_INFO(chip, 390 HWMON_C_REGISTER_TZ), 391 HWMON_CHANNEL_INFO(temp, 392 HWMON_T_INPUT, 393 HWMON_T_INPUT, 394 HWMON_T_INPUT, 395 HWMON_T_INPUT 396 ), 397 HWMON_CHANNEL_INFO(fan, 398 HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, 399 HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, 400 HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, 401 HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, 402 HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, 403 HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET 404 ), 405 HWMON_CHANNEL_INFO(pwm, 406 HWMON_PWM_INPUT, 407 HWMON_PWM_INPUT, 408 HWMON_PWM_INPUT, 409 HWMON_PWM_INPUT, 410 HWMON_PWM_INPUT, 411 HWMON_PWM_INPUT 412 ), 413 HWMON_CHANNEL_INFO(in, 414 HWMON_I_INPUT, 415 HWMON_I_INPUT, 416 HWMON_I_INPUT 417 ), 418 NULL 419 }; 420 421 static const struct hwmon_chip_info ccp_chip_info = { 422 .ops = &ccp_hwmon_ops, 423 .info = ccp_info, 424 }; 425 426 /* read fan connection status and set labels */ 427 static int get_fan_cnct(struct ccp_device *ccp) 428 { 429 int channel; 430 int mode; 431 int ret; 432 433 ret = send_usb_cmd(ccp, CTL_GET_FAN_CNCT, 0, 0, 0); 434 if (ret) 435 return ret; 436 437 for (channel = 0; channel < NUM_FANS; channel++) { 438 mode = ccp->buffer[channel + 1]; 439 if (mode == 0) 440 continue; 441 442 set_bit(channel, ccp->fan_cnct); 443 ccp->target[channel] = -ENODATA; 444 445 switch (mode) { 446 case 1: 447 scnprintf(ccp->fan_label[channel], LABEL_LENGTH, 448 "fan%d 3pin", channel + 1); 449 break; 450 case 2: 451 scnprintf(ccp->fan_label[channel], LABEL_LENGTH, 452 "fan%d 4pin", channel + 1); 453 break; 454 default: 455 scnprintf(ccp->fan_label[channel], LABEL_LENGTH, 456 "fan%d other", channel + 1); 457 break; 458 } 459 } 460 461 return 0; 462 } 463 464 /* read temp sensor connection status */ 465 static int get_temp_cnct(struct ccp_device *ccp) 466 { 467 int channel; 468 int mode; 469 int ret; 470 471 ret = send_usb_cmd(ccp, CTL_GET_TMP_CNCT, 0, 0, 0); 472 if (ret) 473 return ret; 474 475 for (channel = 0; channel < NUM_TEMP_SENSORS; channel++) { 476 mode = ccp->buffer[channel + 1]; 477 if (mode == 0) 478 continue; 479 480 set_bit(channel, ccp->temp_cnct); 481 } 482 483 return 0; 484 } 485 486 static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) 487 { 488 struct ccp_device *ccp; 489 int ret; 490 491 ccp = devm_kzalloc(&hdev->dev, sizeof(*ccp), GFP_KERNEL); 492 if (!ccp) 493 return -ENOMEM; 494 495 ccp->buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL); 496 if (!ccp->buffer) 497 return -ENOMEM; 498 499 ret = hid_parse(hdev); 500 if (ret) 501 return ret; 502 503 ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); 504 if (ret) 505 return ret; 506 507 ret = hid_hw_open(hdev); 508 if (ret) 509 goto out_hw_stop; 510 511 ccp->hdev = hdev; 512 hid_set_drvdata(hdev, ccp); 513 mutex_init(&ccp->mutex); 514 init_completion(&ccp->wait_input_report); 515 516 hid_device_io_start(hdev); 517 518 /* temp and fan connection status only updates when device is powered on */ 519 ret = get_temp_cnct(ccp); 520 if (ret) 521 goto out_hw_close; 522 523 ret = get_fan_cnct(ccp); 524 if (ret) 525 goto out_hw_close; 526 ccp->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsaircpro", 527 ccp, &ccp_chip_info, NULL); 528 if (IS_ERR(ccp->hwmon_dev)) { 529 ret = PTR_ERR(ccp->hwmon_dev); 530 goto out_hw_close; 531 } 532 533 return 0; 534 535 out_hw_close: 536 hid_hw_close(hdev); 537 out_hw_stop: 538 hid_hw_stop(hdev); 539 return ret; 540 } 541 542 static void ccp_remove(struct hid_device *hdev) 543 { 544 struct ccp_device *ccp = hid_get_drvdata(hdev); 545 546 hwmon_device_unregister(ccp->hwmon_dev); 547 hid_hw_close(hdev); 548 hid_hw_stop(hdev); 549 } 550 551 static const struct hid_device_id ccp_devices[] = { 552 { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) }, 553 { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) }, 554 { } 555 }; 556 557 static struct hid_driver ccp_driver = { 558 .name = "corsair-cpro", 559 .id_table = ccp_devices, 560 .probe = ccp_probe, 561 .remove = ccp_remove, 562 .raw_event = ccp_raw_event, 563 }; 564 565 MODULE_DEVICE_TABLE(hid, ccp_devices); 566 MODULE_LICENSE("GPL"); 567 568 static int __init ccp_init(void) 569 { 570 return hid_register_driver(&ccp_driver); 571 } 572 573 static void __exit ccp_exit(void) 574 { 575 hid_unregister_driver(&ccp_driver); 576 } 577 578 /* 579 * When compiling this driver as built-in, hwmon initcalls will get called before the 580 * hid driver and this driver would fail to register. late_initcall solves this. 581 */ 582 late_initcall(ccp_init); 583 module_exit(ccp_exit); 584