1 /* 2 * coretemp.c - Linux kernel module for hardware monitoring 3 * 4 * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> 5 * 6 * Inspired from many hwmon drivers 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; version 2 of the License. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 20 * 02110-1301 USA. 21 */ 22 23 #include <linux/module.h> 24 #include <linux/init.h> 25 #include <linux/slab.h> 26 #include <linux/jiffies.h> 27 #include <linux/hwmon.h> 28 #include <linux/sysfs.h> 29 #include <linux/hwmon-sysfs.h> 30 #include <linux/err.h> 31 #include <linux/mutex.h> 32 #include <linux/list.h> 33 #include <linux/platform_device.h> 34 #include <linux/cpu.h> 35 #include <linux/pci.h> 36 #include <asm/msr.h> 37 #include <asm/processor.h> 38 #include <asm/smp.h> 39 40 #define DRVNAME "coretemp" 41 42 typedef enum { SHOW_TEMP, SHOW_TJMAX, SHOW_TTARGET, SHOW_LABEL, 43 SHOW_NAME } SHOW; 44 45 /* 46 * Functions declaration 47 */ 48 49 static struct coretemp_data *coretemp_update_device(struct device *dev); 50 51 struct coretemp_data { 52 struct device *hwmon_dev; 53 struct mutex update_lock; 54 const char *name; 55 u32 id; 56 u16 core_id; 57 char valid; /* zero until following fields are valid */ 58 unsigned long last_updated; /* in jiffies */ 59 int temp; 60 int tjmax; 61 int ttarget; 62 u8 alarm; 63 }; 64 65 /* 66 * Sysfs stuff 67 */ 68 69 static ssize_t show_name(struct device *dev, struct device_attribute 70 *devattr, char *buf) 71 { 72 int ret; 73 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 74 struct coretemp_data *data = dev_get_drvdata(dev); 75 76 if (attr->index == SHOW_NAME) 77 ret = sprintf(buf, "%s\n", data->name); 78 else /* show label */ 79 ret = sprintf(buf, "Core %d\n", data->core_id); 80 return ret; 81 } 82 83 static ssize_t show_alarm(struct device *dev, struct device_attribute 84 *devattr, char *buf) 85 { 86 struct coretemp_data *data = coretemp_update_device(dev); 87 /* read the Out-of-spec log, never clear */ 88 return sprintf(buf, "%d\n", data->alarm); 89 } 90 91 static ssize_t show_temp(struct device *dev, 92 struct device_attribute *devattr, char *buf) 93 { 94 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 95 struct coretemp_data *data = coretemp_update_device(dev); 96 int err; 97 98 if (attr->index == SHOW_TEMP) 99 err = data->valid ? sprintf(buf, "%d\n", data->temp) : -EAGAIN; 100 else if (attr->index == SHOW_TJMAX) 101 err = sprintf(buf, "%d\n", data->tjmax); 102 else 103 err = sprintf(buf, "%d\n", data->ttarget); 104 return err; 105 } 106 107 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 108 SHOW_TEMP); 109 static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, 110 SHOW_TJMAX); 111 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 112 SHOW_TTARGET); 113 static DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL); 114 static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL); 115 static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME); 116 117 static struct attribute *coretemp_attributes[] = { 118 &sensor_dev_attr_name.dev_attr.attr, 119 &sensor_dev_attr_temp1_label.dev_attr.attr, 120 &dev_attr_temp1_crit_alarm.attr, 121 &sensor_dev_attr_temp1_input.dev_attr.attr, 122 &sensor_dev_attr_temp1_crit.dev_attr.attr, 123 NULL 124 }; 125 126 static const struct attribute_group coretemp_group = { 127 .attrs = coretemp_attributes, 128 }; 129 130 static struct coretemp_data *coretemp_update_device(struct device *dev) 131 { 132 struct coretemp_data *data = dev_get_drvdata(dev); 133 134 mutex_lock(&data->update_lock); 135 136 if (!data->valid || time_after(jiffies, data->last_updated + HZ)) { 137 u32 eax, edx; 138 139 data->valid = 0; 140 rdmsr_on_cpu(data->id, MSR_IA32_THERM_STATUS, &eax, &edx); 141 data->alarm = (eax >> 5) & 1; 142 /* update only if data has been valid */ 143 if (eax & 0x80000000) { 144 data->temp = data->tjmax - (((eax >> 16) 145 & 0x7f) * 1000); 146 data->valid = 1; 147 } else { 148 dev_dbg(dev, "Temperature data invalid (0x%x)\n", eax); 149 } 150 data->last_updated = jiffies; 151 } 152 153 mutex_unlock(&data->update_lock); 154 return data; 155 } 156 157 static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) 158 { 159 /* The 100C is default for both mobile and non mobile CPUs */ 160 161 int tjmax = 100000; 162 int tjmax_ee = 85000; 163 int usemsr_ee = 1; 164 int err; 165 u32 eax, edx; 166 struct pci_dev *host_bridge; 167 168 /* Early chips have no MSR for TjMax */ 169 170 if ((c->x86_model == 0xf) && (c->x86_mask < 4)) { 171 usemsr_ee = 0; 172 } 173 174 /* Atom CPUs */ 175 176 if (c->x86_model == 0x1c) { 177 usemsr_ee = 0; 178 179 host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); 180 181 if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL 182 && (host_bridge->device == 0xa000 /* NM10 based nettop */ 183 || host_bridge->device == 0xa010)) /* NM10 based netbook */ 184 tjmax = 100000; 185 else 186 tjmax = 90000; 187 188 pci_dev_put(host_bridge); 189 } 190 191 if ((c->x86_model > 0xe) && (usemsr_ee)) { 192 u8 platform_id; 193 194 /* Now we can detect the mobile CPU using Intel provided table 195 http://softwarecommunity.intel.com/Wiki/Mobility/720.htm 196 For Core2 cores, check MSR 0x17, bit 28 1 = Mobile CPU 197 */ 198 199 err = rdmsr_safe_on_cpu(id, 0x17, &eax, &edx); 200 if (err) { 201 dev_warn(dev, 202 "Unable to access MSR 0x17, assuming desktop" 203 " CPU\n"); 204 usemsr_ee = 0; 205 } else if (c->x86_model < 0x17 && !(eax & 0x10000000)) { 206 /* Trust bit 28 up to Penryn, I could not find any 207 documentation on that; if you happen to know 208 someone at Intel please ask */ 209 usemsr_ee = 0; 210 } else { 211 /* Platform ID bits 52:50 (EDX starts at bit 32) */ 212 platform_id = (edx >> 18) & 0x7; 213 214 /* Mobile Penryn CPU seems to be platform ID 7 or 5 215 (guesswork) */ 216 if ((c->x86_model == 0x17) && 217 ((platform_id == 5) || (platform_id == 7))) { 218 /* If MSR EE bit is set, set it to 90 degrees C, 219 otherwise 105 degrees C */ 220 tjmax_ee = 90000; 221 tjmax = 105000; 222 } 223 } 224 } 225 226 if (usemsr_ee) { 227 228 err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx); 229 if (err) { 230 dev_warn(dev, 231 "Unable to access MSR 0xEE, for Tjmax, left" 232 " at default\n"); 233 } else if (eax & 0x40000000) { 234 tjmax = tjmax_ee; 235 } 236 /* if we dont use msr EE it means we are desktop CPU (with exeception 237 of Atom) */ 238 } else if (tjmax == 100000) { 239 dev_warn(dev, "Using relative temperature scale!\n"); 240 } 241 242 return tjmax; 243 } 244 245 static int __devinit get_tjmax(struct cpuinfo_x86 *c, u32 id, 246 struct device *dev) 247 { 248 /* The 100C is default for both mobile and non mobile CPUs */ 249 int err; 250 u32 eax, edx; 251 u32 val; 252 253 /* A new feature of current Intel(R) processors, the 254 IA32_TEMPERATURE_TARGET contains the TjMax value */ 255 err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); 256 if (err) { 257 dev_warn(dev, "Unable to read TjMax from CPU.\n"); 258 } else { 259 val = (eax >> 16) & 0xff; 260 /* 261 * If the TjMax is not plausible, an assumption 262 * will be used 263 */ 264 if ((val > 80) && (val < 120)) { 265 dev_info(dev, "TjMax is %d C.\n", val); 266 return val * 1000; 267 } 268 } 269 270 /* 271 * An assumption is made for early CPUs and unreadable MSR. 272 * NOTE: the given value may not be correct. 273 */ 274 275 switch (c->x86_model) { 276 case 0xe: 277 case 0xf: 278 case 0x16: 279 case 0x1a: 280 dev_warn(dev, "TjMax is assumed as 100 C!\n"); 281 return 100000; 282 case 0x17: 283 case 0x1c: /* Atom CPUs */ 284 return adjust_tjmax(c, id, dev); 285 default: 286 dev_warn(dev, "CPU (model=0x%x) is not supported yet," 287 " using default TjMax of 100C.\n", c->x86_model); 288 return 100000; 289 } 290 } 291 292 static void __devinit get_ucode_rev_on_cpu(void *edx) 293 { 294 u32 eax; 295 296 wrmsr(MSR_IA32_UCODE_REV, 0, 0); 297 sync_core(); 298 rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx); 299 } 300 301 static int __devinit coretemp_probe(struct platform_device *pdev) 302 { 303 struct coretemp_data *data; 304 struct cpuinfo_x86 *c = &cpu_data(pdev->id); 305 int err; 306 u32 eax, edx; 307 308 if (!(data = kzalloc(sizeof(struct coretemp_data), GFP_KERNEL))) { 309 err = -ENOMEM; 310 dev_err(&pdev->dev, "Out of memory\n"); 311 goto exit; 312 } 313 314 data->id = pdev->id; 315 #ifdef CONFIG_SMP 316 data->core_id = c->cpu_core_id; 317 #endif 318 data->name = "coretemp"; 319 mutex_init(&data->update_lock); 320 321 /* test if we can access the THERM_STATUS MSR */ 322 err = rdmsr_safe_on_cpu(data->id, MSR_IA32_THERM_STATUS, &eax, &edx); 323 if (err) { 324 dev_err(&pdev->dev, 325 "Unable to access THERM_STATUS MSR, giving up\n"); 326 goto exit_free; 327 } 328 329 /* Check if we have problem with errata AE18 of Core processors: 330 Readings might stop update when processor visited too deep sleep, 331 fixed for stepping D0 (6EC). 332 */ 333 334 if ((c->x86_model == 0xe) && (c->x86_mask < 0xc)) { 335 /* check for microcode update */ 336 err = smp_call_function_single(data->id, get_ucode_rev_on_cpu, 337 &edx, 1); 338 if (err) { 339 dev_err(&pdev->dev, 340 "Cannot determine microcode revision of " 341 "CPU#%u (%d)!\n", data->id, err); 342 err = -ENODEV; 343 goto exit_free; 344 } else if (edx < 0x39) { 345 err = -ENODEV; 346 dev_err(&pdev->dev, 347 "Errata AE18 not fixed, update BIOS or " 348 "microcode of the CPU!\n"); 349 goto exit_free; 350 } 351 } 352 353 data->tjmax = get_tjmax(c, data->id, &pdev->dev); 354 platform_set_drvdata(pdev, data); 355 356 /* 357 * read the still undocumented IA32_TEMPERATURE_TARGET. It exists 358 * on older CPUs but not in this register, 359 * Atoms don't have it either. 360 */ 361 362 if ((c->x86_model > 0xe) && (c->x86_model != 0x1c)) { 363 err = rdmsr_safe_on_cpu(data->id, MSR_IA32_TEMPERATURE_TARGET, 364 &eax, &edx); 365 if (err) { 366 dev_warn(&pdev->dev, "Unable to read" 367 " IA32_TEMPERATURE_TARGET MSR\n"); 368 } else { 369 data->ttarget = data->tjmax - 370 (((eax >> 8) & 0xff) * 1000); 371 err = device_create_file(&pdev->dev, 372 &sensor_dev_attr_temp1_max.dev_attr); 373 if (err) 374 goto exit_free; 375 } 376 } 377 378 if ((err = sysfs_create_group(&pdev->dev.kobj, &coretemp_group))) 379 goto exit_dev; 380 381 data->hwmon_dev = hwmon_device_register(&pdev->dev); 382 if (IS_ERR(data->hwmon_dev)) { 383 err = PTR_ERR(data->hwmon_dev); 384 dev_err(&pdev->dev, "Class registration failed (%d)\n", 385 err); 386 goto exit_class; 387 } 388 389 return 0; 390 391 exit_class: 392 sysfs_remove_group(&pdev->dev.kobj, &coretemp_group); 393 exit_dev: 394 device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr); 395 exit_free: 396 kfree(data); 397 exit: 398 return err; 399 } 400 401 static int __devexit coretemp_remove(struct platform_device *pdev) 402 { 403 struct coretemp_data *data = platform_get_drvdata(pdev); 404 405 hwmon_device_unregister(data->hwmon_dev); 406 sysfs_remove_group(&pdev->dev.kobj, &coretemp_group); 407 device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr); 408 platform_set_drvdata(pdev, NULL); 409 kfree(data); 410 return 0; 411 } 412 413 static struct platform_driver coretemp_driver = { 414 .driver = { 415 .owner = THIS_MODULE, 416 .name = DRVNAME, 417 }, 418 .probe = coretemp_probe, 419 .remove = __devexit_p(coretemp_remove), 420 }; 421 422 struct pdev_entry { 423 struct list_head list; 424 struct platform_device *pdev; 425 unsigned int cpu; 426 #ifdef CONFIG_SMP 427 u16 phys_proc_id; 428 u16 cpu_core_id; 429 #endif 430 }; 431 432 static LIST_HEAD(pdev_list); 433 static DEFINE_MUTEX(pdev_list_mutex); 434 435 static int __cpuinit coretemp_device_add(unsigned int cpu) 436 { 437 int err; 438 struct platform_device *pdev; 439 struct pdev_entry *pdev_entry; 440 struct cpuinfo_x86 *c = &cpu_data(cpu); 441 442 /* 443 * CPUID.06H.EAX[0] indicates whether the CPU has thermal 444 * sensors. We check this bit only, all the early CPUs 445 * without thermal sensors will be filtered out. 446 */ 447 if (!cpu_has(c, X86_FEATURE_DTS)) { 448 printk(KERN_INFO DRVNAME ": CPU (model=0x%x)" 449 " has no thermal sensor.\n", c->x86_model); 450 return 0; 451 } 452 453 mutex_lock(&pdev_list_mutex); 454 455 #ifdef CONFIG_SMP 456 /* Skip second HT entry of each core */ 457 list_for_each_entry(pdev_entry, &pdev_list, list) { 458 if (c->phys_proc_id == pdev_entry->phys_proc_id && 459 c->cpu_core_id == pdev_entry->cpu_core_id) { 460 err = 0; /* Not an error */ 461 goto exit; 462 } 463 } 464 #endif 465 466 pdev = platform_device_alloc(DRVNAME, cpu); 467 if (!pdev) { 468 err = -ENOMEM; 469 printk(KERN_ERR DRVNAME ": Device allocation failed\n"); 470 goto exit; 471 } 472 473 pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); 474 if (!pdev_entry) { 475 err = -ENOMEM; 476 goto exit_device_put; 477 } 478 479 err = platform_device_add(pdev); 480 if (err) { 481 printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", 482 err); 483 goto exit_device_free; 484 } 485 486 pdev_entry->pdev = pdev; 487 pdev_entry->cpu = cpu; 488 #ifdef CONFIG_SMP 489 pdev_entry->phys_proc_id = c->phys_proc_id; 490 pdev_entry->cpu_core_id = c->cpu_core_id; 491 #endif 492 list_add_tail(&pdev_entry->list, &pdev_list); 493 mutex_unlock(&pdev_list_mutex); 494 495 return 0; 496 497 exit_device_free: 498 kfree(pdev_entry); 499 exit_device_put: 500 platform_device_put(pdev); 501 exit: 502 mutex_unlock(&pdev_list_mutex); 503 return err; 504 } 505 506 static void __cpuinit coretemp_device_remove(unsigned int cpu) 507 { 508 struct pdev_entry *p; 509 unsigned int i; 510 511 mutex_lock(&pdev_list_mutex); 512 list_for_each_entry(p, &pdev_list, list) { 513 if (p->cpu != cpu) 514 continue; 515 516 platform_device_unregister(p->pdev); 517 list_del(&p->list); 518 mutex_unlock(&pdev_list_mutex); 519 kfree(p); 520 for_each_cpu(i, cpu_sibling_mask(cpu)) 521 if (i != cpu && !coretemp_device_add(i)) 522 break; 523 return; 524 } 525 mutex_unlock(&pdev_list_mutex); 526 } 527 528 static int __cpuinit coretemp_cpu_callback(struct notifier_block *nfb, 529 unsigned long action, void *hcpu) 530 { 531 unsigned int cpu = (unsigned long) hcpu; 532 533 switch (action) { 534 case CPU_ONLINE: 535 case CPU_DOWN_FAILED: 536 coretemp_device_add(cpu); 537 break; 538 case CPU_DOWN_PREPARE: 539 coretemp_device_remove(cpu); 540 break; 541 } 542 return NOTIFY_OK; 543 } 544 545 static struct notifier_block coretemp_cpu_notifier __refdata = { 546 .notifier_call = coretemp_cpu_callback, 547 }; 548 549 static int __init coretemp_init(void) 550 { 551 int i, err = -ENODEV; 552 553 /* quick check if we run Intel */ 554 if (cpu_data(0).x86_vendor != X86_VENDOR_INTEL) 555 goto exit; 556 557 err = platform_driver_register(&coretemp_driver); 558 if (err) 559 goto exit; 560 561 for_each_online_cpu(i) 562 coretemp_device_add(i); 563 564 #ifndef CONFIG_HOTPLUG_CPU 565 if (list_empty(&pdev_list)) { 566 err = -ENODEV; 567 goto exit_driver_unreg; 568 } 569 #endif 570 571 register_hotcpu_notifier(&coretemp_cpu_notifier); 572 return 0; 573 574 #ifndef CONFIG_HOTPLUG_CPU 575 exit_driver_unreg: 576 platform_driver_unregister(&coretemp_driver); 577 #endif 578 exit: 579 return err; 580 } 581 582 static void __exit coretemp_exit(void) 583 { 584 struct pdev_entry *p, *n; 585 586 unregister_hotcpu_notifier(&coretemp_cpu_notifier); 587 mutex_lock(&pdev_list_mutex); 588 list_for_each_entry_safe(p, n, &pdev_list, list) { 589 platform_device_unregister(p->pdev); 590 list_del(&p->list); 591 kfree(p); 592 } 593 mutex_unlock(&pdev_list_mutex); 594 platform_driver_unregister(&coretemp_driver); 595 } 596 597 MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>"); 598 MODULE_DESCRIPTION("Intel Core temperature monitor"); 599 MODULE_LICENSE("GPL"); 600 601 module_init(coretemp_init) 602 module_exit(coretemp_exit) 603