1 /* 2 * adt7475 - Thermal sensor driver for the ADT7475 chip and derivatives 3 * Copyright (C) 2007-2008, Advanced Micro Devices, Inc. 4 * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net> 5 * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com> 6 * Copyright (C) 2009 Jean Delvare <jdelvare@suse.de> 7 * 8 * Derived from the lm83 driver by Jean Delvare 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13 */ 14 15 #include <linux/module.h> 16 #include <linux/init.h> 17 #include <linux/slab.h> 18 #include <linux/i2c.h> 19 #include <linux/hwmon.h> 20 #include <linux/hwmon-sysfs.h> 21 #include <linux/hwmon-vid.h> 22 #include <linux/err.h> 23 #include <linux/jiffies.h> 24 25 /* Indexes for the sysfs hooks */ 26 27 #define INPUT 0 28 #define MIN 1 29 #define MAX 2 30 #define CONTROL 3 31 #define OFFSET 3 32 #define AUTOMIN 4 33 #define THERM 5 34 #define HYSTERSIS 6 35 36 /* 37 * These are unique identifiers for the sysfs functions - unlike the 38 * numbers above, these are not also indexes into an array 39 */ 40 41 #define ALARM 9 42 #define FAULT 10 43 44 /* 7475 Common Registers */ 45 46 #define REG_DEVREV2 0x12 /* ADT7490 only */ 47 48 #define REG_VTT 0x1E /* ADT7490 only */ 49 #define REG_EXTEND3 0x1F /* ADT7490 only */ 50 51 #define REG_VOLTAGE_BASE 0x20 52 #define REG_TEMP_BASE 0x25 53 #define REG_TACH_BASE 0x28 54 #define REG_PWM_BASE 0x30 55 #define REG_PWM_MAX_BASE 0x38 56 57 #define REG_DEVID 0x3D 58 #define REG_VENDID 0x3E 59 #define REG_DEVID2 0x3F 60 61 #define REG_STATUS1 0x41 62 #define REG_STATUS2 0x42 63 64 #define REG_VID 0x43 /* ADT7476 only */ 65 66 #define REG_VOLTAGE_MIN_BASE 0x44 67 #define REG_VOLTAGE_MAX_BASE 0x45 68 69 #define REG_TEMP_MIN_BASE 0x4E 70 #define REG_TEMP_MAX_BASE 0x4F 71 72 #define REG_TACH_MIN_BASE 0x54 73 74 #define REG_PWM_CONFIG_BASE 0x5C 75 76 #define REG_TEMP_TRANGE_BASE 0x5F 77 78 #define REG_PWM_MIN_BASE 0x64 79 80 #define REG_TEMP_TMIN_BASE 0x67 81 #define REG_TEMP_THERM_BASE 0x6A 82 83 #define REG_REMOTE1_HYSTERSIS 0x6D 84 #define REG_REMOTE2_HYSTERSIS 0x6E 85 86 #define REG_TEMP_OFFSET_BASE 0x70 87 88 #define REG_CONFIG2 0x73 89 90 #define REG_EXTEND1 0x76 91 #define REG_EXTEND2 0x77 92 93 #define REG_CONFIG3 0x78 94 #define REG_CONFIG5 0x7C 95 #define REG_CONFIG4 0x7D 96 97 #define REG_STATUS4 0x81 /* ADT7490 only */ 98 99 #define REG_VTT_MIN 0x84 /* ADT7490 only */ 100 #define REG_VTT_MAX 0x86 /* ADT7490 only */ 101 102 #define VID_VIDSEL 0x80 /* ADT7476 only */ 103 104 #define CONFIG2_ATTN 0x20 105 106 #define CONFIG3_SMBALERT 0x01 107 #define CONFIG3_THERM 0x02 108 109 #define CONFIG4_PINFUNC 0x03 110 #define CONFIG4_MAXDUTY 0x08 111 #define CONFIG4_ATTN_IN10 0x30 112 #define CONFIG4_ATTN_IN43 0xC0 113 114 #define CONFIG5_TWOSCOMP 0x01 115 #define CONFIG5_TEMPOFFSET 0x02 116 #define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */ 117 118 /* ADT7475 Settings */ 119 120 #define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */ 121 #define ADT7475_TEMP_COUNT 3 122 #define ADT7475_TACH_COUNT 4 123 #define ADT7475_PWM_COUNT 3 124 125 /* Macro to read the registers */ 126 127 #define adt7475_read(reg) i2c_smbus_read_byte_data(client, (reg)) 128 129 /* Macros to easily index the registers */ 130 131 #define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2)) 132 #define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2)) 133 134 #define PWM_REG(idx) (REG_PWM_BASE + (idx)) 135 #define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx)) 136 #define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx)) 137 #define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx)) 138 139 #define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx)) 140 #define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2)) 141 #define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2)) 142 143 #define TEMP_REG(idx) (REG_TEMP_BASE + (idx)) 144 #define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2)) 145 #define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2)) 146 #define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx)) 147 #define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx)) 148 #define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx)) 149 #define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx)) 150 151 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; 152 153 enum chips { adt7473, adt7475, adt7476, adt7490 }; 154 155 static const struct i2c_device_id adt7475_id[] = { 156 { "adt7473", adt7473 }, 157 { "adt7475", adt7475 }, 158 { "adt7476", adt7476 }, 159 { "adt7490", adt7490 }, 160 { } 161 }; 162 MODULE_DEVICE_TABLE(i2c, adt7475_id); 163 164 struct adt7475_data { 165 struct device *hwmon_dev; 166 struct mutex lock; 167 168 unsigned long measure_updated; 169 unsigned long limits_updated; 170 char valid; 171 172 u8 config4; 173 u8 config5; 174 u8 has_voltage; 175 u8 bypass_attn; /* Bypass voltage attenuator */ 176 u8 has_pwm2:1; 177 u8 has_fan4:1; 178 u8 has_vid:1; 179 u32 alarms; 180 u16 voltage[3][6]; 181 u16 temp[7][3]; 182 u16 tach[2][4]; 183 u8 pwm[4][3]; 184 u8 range[3]; 185 u8 pwmctl[3]; 186 u8 pwmchan[3]; 187 188 u8 vid; 189 u8 vrm; 190 }; 191 192 static struct i2c_driver adt7475_driver; 193 static struct adt7475_data *adt7475_update_device(struct device *dev); 194 static void adt7475_read_hystersis(struct i2c_client *client); 195 static void adt7475_read_pwm(struct i2c_client *client, int index); 196 197 /* Given a temp value, convert it to register value */ 198 199 static inline u16 temp2reg(struct adt7475_data *data, long val) 200 { 201 u16 ret; 202 203 if (!(data->config5 & CONFIG5_TWOSCOMP)) { 204 val = clamp_val(val, -64000, 191000); 205 ret = (val + 64500) / 1000; 206 } else { 207 val = clamp_val(val, -128000, 127000); 208 if (val < -500) 209 ret = (256500 + val) / 1000; 210 else 211 ret = (val + 500) / 1000; 212 } 213 214 return ret << 2; 215 } 216 217 /* Given a register value, convert it to a real temp value */ 218 219 static inline int reg2temp(struct adt7475_data *data, u16 reg) 220 { 221 if (data->config5 & CONFIG5_TWOSCOMP) { 222 if (reg >= 512) 223 return (reg - 1024) * 250; 224 else 225 return reg * 250; 226 } else 227 return (reg - 256) * 250; 228 } 229 230 static inline int tach2rpm(u16 tach) 231 { 232 if (tach == 0 || tach == 0xFFFF) 233 return 0; 234 235 return (90000 * 60) / tach; 236 } 237 238 static inline u16 rpm2tach(unsigned long rpm) 239 { 240 if (rpm == 0) 241 return 0; 242 243 return clamp_val((90000 * 60) / rpm, 1, 0xFFFF); 244 } 245 246 /* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */ 247 static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = { 248 { 45, 94 }, /* +2.5V */ 249 { 175, 525 }, /* Vccp */ 250 { 68, 71 }, /* Vcc */ 251 { 93, 47 }, /* +5V */ 252 { 120, 20 }, /* +12V */ 253 { 45, 45 }, /* Vtt */ 254 }; 255 256 static inline int reg2volt(int channel, u16 reg, u8 bypass_attn) 257 { 258 const int *r = adt7473_in_scaling[channel]; 259 260 if (bypass_attn & (1 << channel)) 261 return DIV_ROUND_CLOSEST(reg * 2250, 1024); 262 return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024); 263 } 264 265 static inline u16 volt2reg(int channel, long volt, u8 bypass_attn) 266 { 267 const int *r = adt7473_in_scaling[channel]; 268 long reg; 269 270 if (bypass_attn & (1 << channel)) 271 reg = (volt * 1024) / 2250; 272 else 273 reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250); 274 return clamp_val(reg, 0, 1023) & (0xff << 2); 275 } 276 277 static u16 adt7475_read_word(struct i2c_client *client, int reg) 278 { 279 u16 val; 280 281 val = i2c_smbus_read_byte_data(client, reg); 282 val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8); 283 284 return val; 285 } 286 287 static void adt7475_write_word(struct i2c_client *client, int reg, u16 val) 288 { 289 i2c_smbus_write_byte_data(client, reg + 1, val >> 8); 290 i2c_smbus_write_byte_data(client, reg, val & 0xFF); 291 } 292 293 /* 294 * Find the nearest value in a table - used for pwm frequency and 295 * auto temp range 296 */ 297 static int find_nearest(long val, const int *array, int size) 298 { 299 int i; 300 301 if (val < array[0]) 302 return 0; 303 304 if (val > array[size - 1]) 305 return size - 1; 306 307 for (i = 0; i < size - 1; i++) { 308 int a, b; 309 310 if (val > array[i + 1]) 311 continue; 312 313 a = val - array[i]; 314 b = array[i + 1] - val; 315 316 return (a <= b) ? i : i + 1; 317 } 318 319 return 0; 320 } 321 322 static ssize_t show_voltage(struct device *dev, struct device_attribute *attr, 323 char *buf) 324 { 325 struct adt7475_data *data = adt7475_update_device(dev); 326 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 327 unsigned short val; 328 329 switch (sattr->nr) { 330 case ALARM: 331 return sprintf(buf, "%d\n", 332 (data->alarms >> sattr->index) & 1); 333 default: 334 val = data->voltage[sattr->nr][sattr->index]; 335 return sprintf(buf, "%d\n", 336 reg2volt(sattr->index, val, data->bypass_attn)); 337 } 338 } 339 340 static ssize_t set_voltage(struct device *dev, struct device_attribute *attr, 341 const char *buf, size_t count) 342 { 343 344 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 345 struct i2c_client *client = to_i2c_client(dev); 346 struct adt7475_data *data = i2c_get_clientdata(client); 347 unsigned char reg; 348 long val; 349 350 if (kstrtol(buf, 10, &val)) 351 return -EINVAL; 352 353 mutex_lock(&data->lock); 354 355 data->voltage[sattr->nr][sattr->index] = 356 volt2reg(sattr->index, val, data->bypass_attn); 357 358 if (sattr->index < ADT7475_VOLTAGE_COUNT) { 359 if (sattr->nr == MIN) 360 reg = VOLTAGE_MIN_REG(sattr->index); 361 else 362 reg = VOLTAGE_MAX_REG(sattr->index); 363 } else { 364 if (sattr->nr == MIN) 365 reg = REG_VTT_MIN; 366 else 367 reg = REG_VTT_MAX; 368 } 369 370 i2c_smbus_write_byte_data(client, reg, 371 data->voltage[sattr->nr][sattr->index] >> 2); 372 mutex_unlock(&data->lock); 373 374 return count; 375 } 376 377 static ssize_t show_temp(struct device *dev, struct device_attribute *attr, 378 char *buf) 379 { 380 struct adt7475_data *data = adt7475_update_device(dev); 381 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 382 int out; 383 384 switch (sattr->nr) { 385 case HYSTERSIS: 386 mutex_lock(&data->lock); 387 out = data->temp[sattr->nr][sattr->index]; 388 if (sattr->index != 1) 389 out = (out >> 4) & 0xF; 390 else 391 out = (out & 0xF); 392 /* 393 * Show the value as an absolute number tied to 394 * THERM 395 */ 396 out = reg2temp(data, data->temp[THERM][sattr->index]) - 397 out * 1000; 398 mutex_unlock(&data->lock); 399 break; 400 401 case OFFSET: 402 /* 403 * Offset is always 2's complement, regardless of the 404 * setting in CONFIG5 405 */ 406 mutex_lock(&data->lock); 407 out = (s8)data->temp[sattr->nr][sattr->index]; 408 if (data->config5 & CONFIG5_TEMPOFFSET) 409 out *= 1000; 410 else 411 out *= 500; 412 mutex_unlock(&data->lock); 413 break; 414 415 case ALARM: 416 out = (data->alarms >> (sattr->index + 4)) & 1; 417 break; 418 419 case FAULT: 420 /* Note - only for remote1 and remote2 */ 421 out = !!(data->alarms & (sattr->index ? 0x8000 : 0x4000)); 422 break; 423 424 default: 425 /* All other temp values are in the configured format */ 426 out = reg2temp(data, data->temp[sattr->nr][sattr->index]); 427 } 428 429 return sprintf(buf, "%d\n", out); 430 } 431 432 static ssize_t set_temp(struct device *dev, struct device_attribute *attr, 433 const char *buf, size_t count) 434 { 435 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 436 struct i2c_client *client = to_i2c_client(dev); 437 struct adt7475_data *data = i2c_get_clientdata(client); 438 unsigned char reg = 0; 439 u8 out; 440 int temp; 441 long val; 442 443 if (kstrtol(buf, 10, &val)) 444 return -EINVAL; 445 446 mutex_lock(&data->lock); 447 448 /* We need the config register in all cases for temp <-> reg conv. */ 449 data->config5 = adt7475_read(REG_CONFIG5); 450 451 switch (sattr->nr) { 452 case OFFSET: 453 if (data->config5 & CONFIG5_TEMPOFFSET) { 454 val = clamp_val(val, -63000, 127000); 455 out = data->temp[OFFSET][sattr->index] = val / 1000; 456 } else { 457 val = clamp_val(val, -63000, 64000); 458 out = data->temp[OFFSET][sattr->index] = val / 500; 459 } 460 break; 461 462 case HYSTERSIS: 463 /* 464 * The value will be given as an absolute value, turn it 465 * into an offset based on THERM 466 */ 467 468 /* Read fresh THERM and HYSTERSIS values from the chip */ 469 data->temp[THERM][sattr->index] = 470 adt7475_read(TEMP_THERM_REG(sattr->index)) << 2; 471 adt7475_read_hystersis(client); 472 473 temp = reg2temp(data, data->temp[THERM][sattr->index]); 474 val = clamp_val(val, temp - 15000, temp); 475 val = (temp - val) / 1000; 476 477 if (sattr->index != 1) { 478 data->temp[HYSTERSIS][sattr->index] &= 0xF0; 479 data->temp[HYSTERSIS][sattr->index] |= (val & 0xF) << 4; 480 } else { 481 data->temp[HYSTERSIS][sattr->index] &= 0x0F; 482 data->temp[HYSTERSIS][sattr->index] |= (val & 0xF); 483 } 484 485 out = data->temp[HYSTERSIS][sattr->index]; 486 break; 487 488 default: 489 data->temp[sattr->nr][sattr->index] = temp2reg(data, val); 490 491 /* 492 * We maintain an extra 2 digits of precision for simplicity 493 * - shift those back off before writing the value 494 */ 495 out = (u8) (data->temp[sattr->nr][sattr->index] >> 2); 496 } 497 498 switch (sattr->nr) { 499 case MIN: 500 reg = TEMP_MIN_REG(sattr->index); 501 break; 502 case MAX: 503 reg = TEMP_MAX_REG(sattr->index); 504 break; 505 case OFFSET: 506 reg = TEMP_OFFSET_REG(sattr->index); 507 break; 508 case AUTOMIN: 509 reg = TEMP_TMIN_REG(sattr->index); 510 break; 511 case THERM: 512 reg = TEMP_THERM_REG(sattr->index); 513 break; 514 case HYSTERSIS: 515 if (sattr->index != 2) 516 reg = REG_REMOTE1_HYSTERSIS; 517 else 518 reg = REG_REMOTE2_HYSTERSIS; 519 520 break; 521 } 522 523 i2c_smbus_write_byte_data(client, reg, out); 524 525 mutex_unlock(&data->lock); 526 return count; 527 } 528 529 /* 530 * Table of autorange values - the user will write the value in millidegrees, 531 * and we'll convert it 532 */ 533 static const int autorange_table[] = { 534 2000, 2500, 3330, 4000, 5000, 6670, 8000, 535 10000, 13330, 16000, 20000, 26670, 32000, 40000, 536 53330, 80000 537 }; 538 539 static ssize_t show_point2(struct device *dev, struct device_attribute *attr, 540 char *buf) 541 { 542 struct adt7475_data *data = adt7475_update_device(dev); 543 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 544 int out, val; 545 546 mutex_lock(&data->lock); 547 out = (data->range[sattr->index] >> 4) & 0x0F; 548 val = reg2temp(data, data->temp[AUTOMIN][sattr->index]); 549 mutex_unlock(&data->lock); 550 551 return sprintf(buf, "%d\n", val + autorange_table[out]); 552 } 553 554 static ssize_t set_point2(struct device *dev, struct device_attribute *attr, 555 const char *buf, size_t count) 556 { 557 struct i2c_client *client = to_i2c_client(dev); 558 struct adt7475_data *data = i2c_get_clientdata(client); 559 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 560 int temp; 561 long val; 562 563 if (kstrtol(buf, 10, &val)) 564 return -EINVAL; 565 566 mutex_lock(&data->lock); 567 568 /* Get a fresh copy of the needed registers */ 569 data->config5 = adt7475_read(REG_CONFIG5); 570 data->temp[AUTOMIN][sattr->index] = 571 adt7475_read(TEMP_TMIN_REG(sattr->index)) << 2; 572 data->range[sattr->index] = 573 adt7475_read(TEMP_TRANGE_REG(sattr->index)); 574 575 /* 576 * The user will write an absolute value, so subtract the start point 577 * to figure the range 578 */ 579 temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]); 580 val = clamp_val(val, temp + autorange_table[0], 581 temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]); 582 val -= temp; 583 584 /* Find the nearest table entry to what the user wrote */ 585 val = find_nearest(val, autorange_table, ARRAY_SIZE(autorange_table)); 586 587 data->range[sattr->index] &= ~0xF0; 588 data->range[sattr->index] |= val << 4; 589 590 i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index), 591 data->range[sattr->index]); 592 593 mutex_unlock(&data->lock); 594 return count; 595 } 596 597 static ssize_t show_tach(struct device *dev, struct device_attribute *attr, 598 char *buf) 599 { 600 struct adt7475_data *data = adt7475_update_device(dev); 601 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 602 int out; 603 604 if (sattr->nr == ALARM) 605 out = (data->alarms >> (sattr->index + 10)) & 1; 606 else 607 out = tach2rpm(data->tach[sattr->nr][sattr->index]); 608 609 return sprintf(buf, "%d\n", out); 610 } 611 612 static ssize_t set_tach(struct device *dev, struct device_attribute *attr, 613 const char *buf, size_t count) 614 { 615 616 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 617 struct i2c_client *client = to_i2c_client(dev); 618 struct adt7475_data *data = i2c_get_clientdata(client); 619 unsigned long val; 620 621 if (kstrtoul(buf, 10, &val)) 622 return -EINVAL; 623 624 mutex_lock(&data->lock); 625 626 data->tach[MIN][sattr->index] = rpm2tach(val); 627 628 adt7475_write_word(client, TACH_MIN_REG(sattr->index), 629 data->tach[MIN][sattr->index]); 630 631 mutex_unlock(&data->lock); 632 return count; 633 } 634 635 static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, 636 char *buf) 637 { 638 struct adt7475_data *data = adt7475_update_device(dev); 639 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 640 641 return sprintf(buf, "%d\n", data->pwm[sattr->nr][sattr->index]); 642 } 643 644 static ssize_t show_pwmchan(struct device *dev, struct device_attribute *attr, 645 char *buf) 646 { 647 struct adt7475_data *data = adt7475_update_device(dev); 648 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 649 650 return sprintf(buf, "%d\n", data->pwmchan[sattr->index]); 651 } 652 653 static ssize_t show_pwmctrl(struct device *dev, struct device_attribute *attr, 654 char *buf) 655 { 656 struct adt7475_data *data = adt7475_update_device(dev); 657 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 658 659 return sprintf(buf, "%d\n", data->pwmctl[sattr->index]); 660 } 661 662 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, 663 const char *buf, size_t count) 664 { 665 666 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 667 struct i2c_client *client = to_i2c_client(dev); 668 struct adt7475_data *data = i2c_get_clientdata(client); 669 unsigned char reg = 0; 670 long val; 671 672 if (kstrtol(buf, 10, &val)) 673 return -EINVAL; 674 675 mutex_lock(&data->lock); 676 677 switch (sattr->nr) { 678 case INPUT: 679 /* Get a fresh value for CONTROL */ 680 data->pwm[CONTROL][sattr->index] = 681 adt7475_read(PWM_CONFIG_REG(sattr->index)); 682 683 /* 684 * If we are not in manual mode, then we shouldn't allow 685 * the user to set the pwm speed 686 */ 687 if (((data->pwm[CONTROL][sattr->index] >> 5) & 7) != 7) { 688 mutex_unlock(&data->lock); 689 return count; 690 } 691 692 reg = PWM_REG(sattr->index); 693 break; 694 695 case MIN: 696 reg = PWM_MIN_REG(sattr->index); 697 break; 698 699 case MAX: 700 reg = PWM_MAX_REG(sattr->index); 701 break; 702 } 703 704 data->pwm[sattr->nr][sattr->index] = clamp_val(val, 0, 0xFF); 705 i2c_smbus_write_byte_data(client, reg, 706 data->pwm[sattr->nr][sattr->index]); 707 708 mutex_unlock(&data->lock); 709 710 return count; 711 } 712 713 /* Called by set_pwmctrl and set_pwmchan */ 714 715 static int hw_set_pwm(struct i2c_client *client, int index, 716 unsigned int pwmctl, unsigned int pwmchan) 717 { 718 struct adt7475_data *data = i2c_get_clientdata(client); 719 long val = 0; 720 721 switch (pwmctl) { 722 case 0: 723 val = 0x03; /* Run at full speed */ 724 break; 725 case 1: 726 val = 0x07; /* Manual mode */ 727 break; 728 case 2: 729 switch (pwmchan) { 730 case 1: 731 /* Remote1 controls PWM */ 732 val = 0x00; 733 break; 734 case 2: 735 /* local controls PWM */ 736 val = 0x01; 737 break; 738 case 4: 739 /* remote2 controls PWM */ 740 val = 0x02; 741 break; 742 case 6: 743 /* local/remote2 control PWM */ 744 val = 0x05; 745 break; 746 case 7: 747 /* All three control PWM */ 748 val = 0x06; 749 break; 750 default: 751 return -EINVAL; 752 } 753 break; 754 default: 755 return -EINVAL; 756 } 757 758 data->pwmctl[index] = pwmctl; 759 data->pwmchan[index] = pwmchan; 760 761 data->pwm[CONTROL][index] &= ~0xE0; 762 data->pwm[CONTROL][index] |= (val & 7) << 5; 763 764 i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), 765 data->pwm[CONTROL][index]); 766 767 return 0; 768 } 769 770 static ssize_t set_pwmchan(struct device *dev, struct device_attribute *attr, 771 const char *buf, size_t count) 772 { 773 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 774 struct i2c_client *client = to_i2c_client(dev); 775 struct adt7475_data *data = i2c_get_clientdata(client); 776 int r; 777 long val; 778 779 if (kstrtol(buf, 10, &val)) 780 return -EINVAL; 781 782 mutex_lock(&data->lock); 783 /* Read Modify Write PWM values */ 784 adt7475_read_pwm(client, sattr->index); 785 r = hw_set_pwm(client, sattr->index, data->pwmctl[sattr->index], val); 786 if (r) 787 count = r; 788 mutex_unlock(&data->lock); 789 790 return count; 791 } 792 793 static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr, 794 const char *buf, size_t count) 795 { 796 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 797 struct i2c_client *client = to_i2c_client(dev); 798 struct adt7475_data *data = i2c_get_clientdata(client); 799 int r; 800 long val; 801 802 if (kstrtol(buf, 10, &val)) 803 return -EINVAL; 804 805 mutex_lock(&data->lock); 806 /* Read Modify Write PWM values */ 807 adt7475_read_pwm(client, sattr->index); 808 r = hw_set_pwm(client, sattr->index, val, data->pwmchan[sattr->index]); 809 if (r) 810 count = r; 811 mutex_unlock(&data->lock); 812 813 return count; 814 } 815 816 /* List of frequencies for the PWM */ 817 static const int pwmfreq_table[] = { 818 11, 14, 22, 29, 35, 44, 58, 88 819 }; 820 821 static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr, 822 char *buf) 823 { 824 struct adt7475_data *data = adt7475_update_device(dev); 825 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 826 827 return sprintf(buf, "%d\n", 828 pwmfreq_table[data->range[sattr->index] & 7]); 829 } 830 831 static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr, 832 const char *buf, size_t count) 833 { 834 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); 835 struct i2c_client *client = to_i2c_client(dev); 836 struct adt7475_data *data = i2c_get_clientdata(client); 837 int out; 838 long val; 839 840 if (kstrtol(buf, 10, &val)) 841 return -EINVAL; 842 843 out = find_nearest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table)); 844 845 mutex_lock(&data->lock); 846 847 data->range[sattr->index] = 848 adt7475_read(TEMP_TRANGE_REG(sattr->index)); 849 data->range[sattr->index] &= ~7; 850 data->range[sattr->index] |= out; 851 852 i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index), 853 data->range[sattr->index]); 854 855 mutex_unlock(&data->lock); 856 return count; 857 } 858 859 static ssize_t show_pwm_at_crit(struct device *dev, 860 struct device_attribute *devattr, char *buf) 861 { 862 struct adt7475_data *data = adt7475_update_device(dev); 863 return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY)); 864 } 865 866 static ssize_t set_pwm_at_crit(struct device *dev, 867 struct device_attribute *devattr, 868 const char *buf, size_t count) 869 { 870 struct i2c_client *client = to_i2c_client(dev); 871 struct adt7475_data *data = i2c_get_clientdata(client); 872 long val; 873 874 if (kstrtol(buf, 10, &val)) 875 return -EINVAL; 876 if (val != 0 && val != 1) 877 return -EINVAL; 878 879 mutex_lock(&data->lock); 880 data->config4 = i2c_smbus_read_byte_data(client, REG_CONFIG4); 881 if (val) 882 data->config4 |= CONFIG4_MAXDUTY; 883 else 884 data->config4 &= ~CONFIG4_MAXDUTY; 885 i2c_smbus_write_byte_data(client, REG_CONFIG4, data->config4); 886 mutex_unlock(&data->lock); 887 888 return count; 889 } 890 891 static ssize_t show_vrm(struct device *dev, struct device_attribute *devattr, 892 char *buf) 893 { 894 struct adt7475_data *data = dev_get_drvdata(dev); 895 return sprintf(buf, "%d\n", (int)data->vrm); 896 } 897 898 static ssize_t set_vrm(struct device *dev, struct device_attribute *devattr, 899 const char *buf, size_t count) 900 { 901 struct adt7475_data *data = dev_get_drvdata(dev); 902 long val; 903 904 if (kstrtol(buf, 10, &val)) 905 return -EINVAL; 906 if (val < 0 || val > 255) 907 return -EINVAL; 908 data->vrm = val; 909 910 return count; 911 } 912 913 static ssize_t show_vid(struct device *dev, struct device_attribute *devattr, 914 char *buf) 915 { 916 struct adt7475_data *data = adt7475_update_device(dev); 917 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); 918 } 919 920 static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_voltage, NULL, INPUT, 0); 921 static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_voltage, 922 set_voltage, MAX, 0); 923 static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_voltage, 924 set_voltage, MIN, 0); 925 static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0); 926 static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1); 927 static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage, 928 set_voltage, MAX, 1); 929 static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage, 930 set_voltage, MIN, 1); 931 static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1); 932 static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 2); 933 static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage, 934 set_voltage, MAX, 2); 935 static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage, 936 set_voltage, MIN, 2); 937 static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2); 938 static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_voltage, NULL, INPUT, 3); 939 static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_voltage, 940 set_voltage, MAX, 3); 941 static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_voltage, 942 set_voltage, MIN, 3); 943 static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_voltage, NULL, ALARM, 3); 944 static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_voltage, NULL, INPUT, 4); 945 static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_voltage, 946 set_voltage, MAX, 4); 947 static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_voltage, 948 set_voltage, MIN, 4); 949 static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_voltage, NULL, ALARM, 8); 950 static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_voltage, NULL, INPUT, 5); 951 static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_voltage, 952 set_voltage, MAX, 5); 953 static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_voltage, 954 set_voltage, MIN, 5); 955 static SENSOR_DEVICE_ATTR_2(in5_alarm, S_IRUGO, show_voltage, NULL, ALARM, 31); 956 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0); 957 static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0); 958 static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0); 959 static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp, 960 MAX, 0); 961 static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp, 962 MIN, 0); 963 static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp, 964 set_temp, OFFSET, 0); 965 static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO | S_IWUSR, 966 show_temp, set_temp, AUTOMIN, 0); 967 static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IRUGO | S_IWUSR, 968 show_point2, set_point2, 0, 0); 969 static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp, 970 THERM, 0); 971 static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp, 972 set_temp, HYSTERSIS, 0); 973 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1); 974 static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1); 975 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp, 976 MAX, 1); 977 static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp, 978 MIN, 1); 979 static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp, 980 set_temp, OFFSET, 1); 981 static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IRUGO | S_IWUSR, 982 show_temp, set_temp, AUTOMIN, 1); 983 static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IRUGO | S_IWUSR, 984 show_point2, set_point2, 0, 1); 985 static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp, 986 THERM, 1); 987 static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp, 988 set_temp, HYSTERSIS, 1); 989 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2); 990 static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2); 991 static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2); 992 static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp, 993 MAX, 2); 994 static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp, 995 MIN, 2); 996 static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp, 997 set_temp, OFFSET, 2); 998 static SENSOR_DEVICE_ATTR_2(temp3_auto_point1_temp, S_IRUGO | S_IWUSR, 999 show_temp, set_temp, AUTOMIN, 2); 1000 static SENSOR_DEVICE_ATTR_2(temp3_auto_point2_temp, S_IRUGO | S_IWUSR, 1001 show_point2, set_point2, 0, 2); 1002 static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp, 1003 THERM, 2); 1004 static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp, 1005 set_temp, HYSTERSIS, 2); 1006 static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0); 1007 static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach, 1008 MIN, 0); 1009 static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, show_tach, NULL, ALARM, 0); 1010 static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_tach, NULL, INPUT, 1); 1011 static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_tach, set_tach, 1012 MIN, 1); 1013 static SENSOR_DEVICE_ATTR_2(fan2_alarm, S_IRUGO, show_tach, NULL, ALARM, 1); 1014 static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_tach, NULL, INPUT, 2); 1015 static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_tach, set_tach, 1016 MIN, 2); 1017 static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_tach, NULL, ALARM, 2); 1018 static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_tach, NULL, INPUT, 3); 1019 static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_tach, set_tach, 1020 MIN, 3); 1021 static SENSOR_DEVICE_ATTR_2(fan4_alarm, S_IRUGO, show_tach, NULL, ALARM, 3); 1022 static SENSOR_DEVICE_ATTR_2(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT, 1023 0); 1024 static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq, 1025 set_pwmfreq, INPUT, 0); 1026 static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl, 1027 set_pwmctrl, INPUT, 0); 1028 static SENSOR_DEVICE_ATTR_2(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR, 1029 show_pwmchan, set_pwmchan, INPUT, 0); 1030 static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, 1031 set_pwm, MIN, 0); 1032 static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm, 1033 set_pwm, MAX, 0); 1034 static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT, 1035 1); 1036 static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq, 1037 set_pwmfreq, INPUT, 1); 1038 static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl, 1039 set_pwmctrl, INPUT, 1); 1040 static SENSOR_DEVICE_ATTR_2(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR, 1041 show_pwmchan, set_pwmchan, INPUT, 1); 1042 static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, 1043 set_pwm, MIN, 1); 1044 static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm, 1045 set_pwm, MAX, 1); 1046 static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT, 1047 2); 1048 static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq, 1049 set_pwmfreq, INPUT, 2); 1050 static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl, 1051 set_pwmctrl, INPUT, 2); 1052 static SENSOR_DEVICE_ATTR_2(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR, 1053 show_pwmchan, set_pwmchan, INPUT, 2); 1054 static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, 1055 set_pwm, MIN, 2); 1056 static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm, 1057 set_pwm, MAX, 2); 1058 1059 /* Non-standard name, might need revisiting */ 1060 static DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO, 1061 show_pwm_at_crit, set_pwm_at_crit); 1062 1063 static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, set_vrm); 1064 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); 1065 1066 static struct attribute *adt7475_attrs[] = { 1067 &sensor_dev_attr_in1_input.dev_attr.attr, 1068 &sensor_dev_attr_in1_max.dev_attr.attr, 1069 &sensor_dev_attr_in1_min.dev_attr.attr, 1070 &sensor_dev_attr_in1_alarm.dev_attr.attr, 1071 &sensor_dev_attr_in2_input.dev_attr.attr, 1072 &sensor_dev_attr_in2_max.dev_attr.attr, 1073 &sensor_dev_attr_in2_min.dev_attr.attr, 1074 &sensor_dev_attr_in2_alarm.dev_attr.attr, 1075 &sensor_dev_attr_temp1_input.dev_attr.attr, 1076 &sensor_dev_attr_temp1_alarm.dev_attr.attr, 1077 &sensor_dev_attr_temp1_fault.dev_attr.attr, 1078 &sensor_dev_attr_temp1_max.dev_attr.attr, 1079 &sensor_dev_attr_temp1_min.dev_attr.attr, 1080 &sensor_dev_attr_temp1_offset.dev_attr.attr, 1081 &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, 1082 &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, 1083 &sensor_dev_attr_temp1_crit.dev_attr.attr, 1084 &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, 1085 &sensor_dev_attr_temp2_input.dev_attr.attr, 1086 &sensor_dev_attr_temp2_alarm.dev_attr.attr, 1087 &sensor_dev_attr_temp2_max.dev_attr.attr, 1088 &sensor_dev_attr_temp2_min.dev_attr.attr, 1089 &sensor_dev_attr_temp2_offset.dev_attr.attr, 1090 &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, 1091 &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, 1092 &sensor_dev_attr_temp2_crit.dev_attr.attr, 1093 &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, 1094 &sensor_dev_attr_temp3_input.dev_attr.attr, 1095 &sensor_dev_attr_temp3_fault.dev_attr.attr, 1096 &sensor_dev_attr_temp3_alarm.dev_attr.attr, 1097 &sensor_dev_attr_temp3_max.dev_attr.attr, 1098 &sensor_dev_attr_temp3_min.dev_attr.attr, 1099 &sensor_dev_attr_temp3_offset.dev_attr.attr, 1100 &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, 1101 &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, 1102 &sensor_dev_attr_temp3_crit.dev_attr.attr, 1103 &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, 1104 &sensor_dev_attr_fan1_input.dev_attr.attr, 1105 &sensor_dev_attr_fan1_min.dev_attr.attr, 1106 &sensor_dev_attr_fan1_alarm.dev_attr.attr, 1107 &sensor_dev_attr_fan2_input.dev_attr.attr, 1108 &sensor_dev_attr_fan2_min.dev_attr.attr, 1109 &sensor_dev_attr_fan2_alarm.dev_attr.attr, 1110 &sensor_dev_attr_fan3_input.dev_attr.attr, 1111 &sensor_dev_attr_fan3_min.dev_attr.attr, 1112 &sensor_dev_attr_fan3_alarm.dev_attr.attr, 1113 &sensor_dev_attr_pwm1.dev_attr.attr, 1114 &sensor_dev_attr_pwm1_freq.dev_attr.attr, 1115 &sensor_dev_attr_pwm1_enable.dev_attr.attr, 1116 &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, 1117 &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, 1118 &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, 1119 &sensor_dev_attr_pwm3.dev_attr.attr, 1120 &sensor_dev_attr_pwm3_freq.dev_attr.attr, 1121 &sensor_dev_attr_pwm3_enable.dev_attr.attr, 1122 &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, 1123 &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, 1124 &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, 1125 &dev_attr_pwm_use_point2_pwm_at_crit.attr, 1126 NULL, 1127 }; 1128 1129 static struct attribute *fan4_attrs[] = { 1130 &sensor_dev_attr_fan4_input.dev_attr.attr, 1131 &sensor_dev_attr_fan4_min.dev_attr.attr, 1132 &sensor_dev_attr_fan4_alarm.dev_attr.attr, 1133 NULL 1134 }; 1135 1136 static struct attribute *pwm2_attrs[] = { 1137 &sensor_dev_attr_pwm2.dev_attr.attr, 1138 &sensor_dev_attr_pwm2_freq.dev_attr.attr, 1139 &sensor_dev_attr_pwm2_enable.dev_attr.attr, 1140 &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, 1141 &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, 1142 &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, 1143 NULL 1144 }; 1145 1146 static struct attribute *in0_attrs[] = { 1147 &sensor_dev_attr_in0_input.dev_attr.attr, 1148 &sensor_dev_attr_in0_max.dev_attr.attr, 1149 &sensor_dev_attr_in0_min.dev_attr.attr, 1150 &sensor_dev_attr_in0_alarm.dev_attr.attr, 1151 NULL 1152 }; 1153 1154 static struct attribute *in3_attrs[] = { 1155 &sensor_dev_attr_in3_input.dev_attr.attr, 1156 &sensor_dev_attr_in3_max.dev_attr.attr, 1157 &sensor_dev_attr_in3_min.dev_attr.attr, 1158 &sensor_dev_attr_in3_alarm.dev_attr.attr, 1159 NULL 1160 }; 1161 1162 static struct attribute *in4_attrs[] = { 1163 &sensor_dev_attr_in4_input.dev_attr.attr, 1164 &sensor_dev_attr_in4_max.dev_attr.attr, 1165 &sensor_dev_attr_in4_min.dev_attr.attr, 1166 &sensor_dev_attr_in4_alarm.dev_attr.attr, 1167 NULL 1168 }; 1169 1170 static struct attribute *in5_attrs[] = { 1171 &sensor_dev_attr_in5_input.dev_attr.attr, 1172 &sensor_dev_attr_in5_max.dev_attr.attr, 1173 &sensor_dev_attr_in5_min.dev_attr.attr, 1174 &sensor_dev_attr_in5_alarm.dev_attr.attr, 1175 NULL 1176 }; 1177 1178 static struct attribute *vid_attrs[] = { 1179 &dev_attr_cpu0_vid.attr, 1180 &dev_attr_vrm.attr, 1181 NULL 1182 }; 1183 1184 static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs }; 1185 static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs }; 1186 static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs }; 1187 static struct attribute_group in0_attr_group = { .attrs = in0_attrs }; 1188 static struct attribute_group in3_attr_group = { .attrs = in3_attrs }; 1189 static struct attribute_group in4_attr_group = { .attrs = in4_attrs }; 1190 static struct attribute_group in5_attr_group = { .attrs = in5_attrs }; 1191 static struct attribute_group vid_attr_group = { .attrs = vid_attrs }; 1192 1193 static int adt7475_detect(struct i2c_client *client, 1194 struct i2c_board_info *info) 1195 { 1196 struct i2c_adapter *adapter = client->adapter; 1197 int vendid, devid, devid2; 1198 const char *name; 1199 1200 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 1201 return -ENODEV; 1202 1203 vendid = adt7475_read(REG_VENDID); 1204 devid2 = adt7475_read(REG_DEVID2); 1205 if (vendid != 0x41 || /* Analog Devices */ 1206 (devid2 & 0xf8) != 0x68) 1207 return -ENODEV; 1208 1209 devid = adt7475_read(REG_DEVID); 1210 if (devid == 0x73) 1211 name = "adt7473"; 1212 else if (devid == 0x75 && client->addr == 0x2e) 1213 name = "adt7475"; 1214 else if (devid == 0x76) 1215 name = "adt7476"; 1216 else if ((devid2 & 0xfc) == 0x6c) 1217 name = "adt7490"; 1218 else { 1219 dev_dbg(&adapter->dev, 1220 "Couldn't detect an ADT7473/75/76/90 part at " 1221 "0x%02x\n", (unsigned int)client->addr); 1222 return -ENODEV; 1223 } 1224 1225 strlcpy(info->type, name, I2C_NAME_SIZE); 1226 1227 return 0; 1228 } 1229 1230 static void adt7475_remove_files(struct i2c_client *client, 1231 struct adt7475_data *data) 1232 { 1233 sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group); 1234 if (data->has_fan4) 1235 sysfs_remove_group(&client->dev.kobj, &fan4_attr_group); 1236 if (data->has_pwm2) 1237 sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group); 1238 if (data->has_voltage & (1 << 0)) 1239 sysfs_remove_group(&client->dev.kobj, &in0_attr_group); 1240 if (data->has_voltage & (1 << 3)) 1241 sysfs_remove_group(&client->dev.kobj, &in3_attr_group); 1242 if (data->has_voltage & (1 << 4)) 1243 sysfs_remove_group(&client->dev.kobj, &in4_attr_group); 1244 if (data->has_voltage & (1 << 5)) 1245 sysfs_remove_group(&client->dev.kobj, &in5_attr_group); 1246 if (data->has_vid) 1247 sysfs_remove_group(&client->dev.kobj, &vid_attr_group); 1248 } 1249 1250 static int adt7475_probe(struct i2c_client *client, 1251 const struct i2c_device_id *id) 1252 { 1253 static const char * const names[] = { 1254 [adt7473] = "ADT7473", 1255 [adt7475] = "ADT7475", 1256 [adt7476] = "ADT7476", 1257 [adt7490] = "ADT7490", 1258 }; 1259 1260 struct adt7475_data *data; 1261 int i, ret = 0, revision; 1262 u8 config2, config3; 1263 1264 data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); 1265 if (data == NULL) 1266 return -ENOMEM; 1267 1268 mutex_init(&data->lock); 1269 i2c_set_clientdata(client, data); 1270 1271 /* Initialize device-specific values */ 1272 switch (id->driver_data) { 1273 case adt7476: 1274 data->has_voltage = 0x0e; /* in1 to in3 */ 1275 revision = adt7475_read(REG_DEVID2) & 0x07; 1276 break; 1277 case adt7490: 1278 data->has_voltage = 0x3e; /* in1 to in5 */ 1279 revision = adt7475_read(REG_DEVID2) & 0x03; 1280 if (revision == 0x03) 1281 revision += adt7475_read(REG_DEVREV2); 1282 break; 1283 default: 1284 data->has_voltage = 0x06; /* in1, in2 */ 1285 revision = adt7475_read(REG_DEVID2) & 0x07; 1286 } 1287 1288 config3 = adt7475_read(REG_CONFIG3); 1289 /* Pin PWM2 may alternatively be used for ALERT output */ 1290 if (!(config3 & CONFIG3_SMBALERT)) 1291 data->has_pwm2 = 1; 1292 /* Meaning of this bit is inverted for the ADT7473-1 */ 1293 if (id->driver_data == adt7473 && revision >= 1) 1294 data->has_pwm2 = !data->has_pwm2; 1295 1296 data->config4 = adt7475_read(REG_CONFIG4); 1297 /* Pin TACH4 may alternatively be used for THERM */ 1298 if ((data->config4 & CONFIG4_PINFUNC) == 0x0) 1299 data->has_fan4 = 1; 1300 1301 /* 1302 * THERM configuration is more complex on the ADT7476 and ADT7490, 1303 * because 2 different pins (TACH4 and +2.5 Vin) can be used for 1304 * this function 1305 */ 1306 if (id->driver_data == adt7490) { 1307 if ((data->config4 & CONFIG4_PINFUNC) == 0x1 && 1308 !(config3 & CONFIG3_THERM)) 1309 data->has_fan4 = 1; 1310 } 1311 if (id->driver_data == adt7476 || id->driver_data == adt7490) { 1312 if (!(config3 & CONFIG3_THERM) || 1313 (data->config4 & CONFIG4_PINFUNC) == 0x1) 1314 data->has_voltage |= (1 << 0); /* in0 */ 1315 } 1316 1317 /* 1318 * On the ADT7476, the +12V input pin may instead be used as VID5, 1319 * and VID pins may alternatively be used as GPIO 1320 */ 1321 if (id->driver_data == adt7476) { 1322 u8 vid = adt7475_read(REG_VID); 1323 if (!(vid & VID_VIDSEL)) 1324 data->has_voltage |= (1 << 4); /* in4 */ 1325 1326 data->has_vid = !(adt7475_read(REG_CONFIG5) & CONFIG5_VIDGPIO); 1327 } 1328 1329 /* Voltage attenuators can be bypassed, globally or individually */ 1330 config2 = adt7475_read(REG_CONFIG2); 1331 if (config2 & CONFIG2_ATTN) { 1332 data->bypass_attn = (0x3 << 3) | 0x3; 1333 } else { 1334 data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) | 1335 ((data->config4 & CONFIG4_ATTN_IN43) >> 3); 1336 } 1337 data->bypass_attn &= data->has_voltage; 1338 1339 /* 1340 * Call adt7475_read_pwm for all pwm's as this will reprogram any 1341 * pwm's which are disabled to manual mode with 0% duty cycle 1342 */ 1343 for (i = 0; i < ADT7475_PWM_COUNT; i++) 1344 adt7475_read_pwm(client, i); 1345 1346 ret = sysfs_create_group(&client->dev.kobj, &adt7475_attr_group); 1347 if (ret) 1348 return ret; 1349 1350 /* Features that can be disabled individually */ 1351 if (data->has_fan4) { 1352 ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group); 1353 if (ret) 1354 goto eremove; 1355 } 1356 if (data->has_pwm2) { 1357 ret = sysfs_create_group(&client->dev.kobj, &pwm2_attr_group); 1358 if (ret) 1359 goto eremove; 1360 } 1361 if (data->has_voltage & (1 << 0)) { 1362 ret = sysfs_create_group(&client->dev.kobj, &in0_attr_group); 1363 if (ret) 1364 goto eremove; 1365 } 1366 if (data->has_voltage & (1 << 3)) { 1367 ret = sysfs_create_group(&client->dev.kobj, &in3_attr_group); 1368 if (ret) 1369 goto eremove; 1370 } 1371 if (data->has_voltage & (1 << 4)) { 1372 ret = sysfs_create_group(&client->dev.kobj, &in4_attr_group); 1373 if (ret) 1374 goto eremove; 1375 } 1376 if (data->has_voltage & (1 << 5)) { 1377 ret = sysfs_create_group(&client->dev.kobj, &in5_attr_group); 1378 if (ret) 1379 goto eremove; 1380 } 1381 if (data->has_vid) { 1382 data->vrm = vid_which_vrm(); 1383 ret = sysfs_create_group(&client->dev.kobj, &vid_attr_group); 1384 if (ret) 1385 goto eremove; 1386 } 1387 1388 data->hwmon_dev = hwmon_device_register(&client->dev); 1389 if (IS_ERR(data->hwmon_dev)) { 1390 ret = PTR_ERR(data->hwmon_dev); 1391 goto eremove; 1392 } 1393 1394 dev_info(&client->dev, "%s device, revision %d\n", 1395 names[id->driver_data], revision); 1396 if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2) 1397 dev_info(&client->dev, "Optional features:%s%s%s%s%s\n", 1398 (data->has_voltage & (1 << 0)) ? " in0" : "", 1399 (data->has_voltage & (1 << 4)) ? " in4" : "", 1400 data->has_fan4 ? " fan4" : "", 1401 data->has_pwm2 ? " pwm2" : "", 1402 data->has_vid ? " vid" : ""); 1403 if (data->bypass_attn) 1404 dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n", 1405 (data->bypass_attn & (1 << 0)) ? " in0" : "", 1406 (data->bypass_attn & (1 << 1)) ? " in1" : "", 1407 (data->bypass_attn & (1 << 3)) ? " in3" : "", 1408 (data->bypass_attn & (1 << 4)) ? " in4" : ""); 1409 1410 return 0; 1411 1412 eremove: 1413 adt7475_remove_files(client, data); 1414 return ret; 1415 } 1416 1417 static int adt7475_remove(struct i2c_client *client) 1418 { 1419 struct adt7475_data *data = i2c_get_clientdata(client); 1420 1421 hwmon_device_unregister(data->hwmon_dev); 1422 adt7475_remove_files(client, data); 1423 1424 return 0; 1425 } 1426 1427 static struct i2c_driver adt7475_driver = { 1428 .class = I2C_CLASS_HWMON, 1429 .driver = { 1430 .name = "adt7475", 1431 }, 1432 .probe = adt7475_probe, 1433 .remove = adt7475_remove, 1434 .id_table = adt7475_id, 1435 .detect = adt7475_detect, 1436 .address_list = normal_i2c, 1437 }; 1438 1439 static void adt7475_read_hystersis(struct i2c_client *client) 1440 { 1441 struct adt7475_data *data = i2c_get_clientdata(client); 1442 1443 data->temp[HYSTERSIS][0] = (u16) adt7475_read(REG_REMOTE1_HYSTERSIS); 1444 data->temp[HYSTERSIS][1] = data->temp[HYSTERSIS][0]; 1445 data->temp[HYSTERSIS][2] = (u16) adt7475_read(REG_REMOTE2_HYSTERSIS); 1446 } 1447 1448 static void adt7475_read_pwm(struct i2c_client *client, int index) 1449 { 1450 struct adt7475_data *data = i2c_get_clientdata(client); 1451 unsigned int v; 1452 1453 data->pwm[CONTROL][index] = adt7475_read(PWM_CONFIG_REG(index)); 1454 1455 /* 1456 * Figure out the internal value for pwmctrl and pwmchan 1457 * based on the current settings 1458 */ 1459 v = (data->pwm[CONTROL][index] >> 5) & 7; 1460 1461 if (v == 3) 1462 data->pwmctl[index] = 0; 1463 else if (v == 7) 1464 data->pwmctl[index] = 1; 1465 else if (v == 4) { 1466 /* 1467 * The fan is disabled - we don't want to 1468 * support that, so change to manual mode and 1469 * set the duty cycle to 0 instead 1470 */ 1471 data->pwm[INPUT][index] = 0; 1472 data->pwm[CONTROL][index] &= ~0xE0; 1473 data->pwm[CONTROL][index] |= (7 << 5); 1474 1475 i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), 1476 data->pwm[INPUT][index]); 1477 1478 i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), 1479 data->pwm[CONTROL][index]); 1480 1481 data->pwmctl[index] = 1; 1482 } else { 1483 data->pwmctl[index] = 2; 1484 1485 switch (v) { 1486 case 0: 1487 data->pwmchan[index] = 1; 1488 break; 1489 case 1: 1490 data->pwmchan[index] = 2; 1491 break; 1492 case 2: 1493 data->pwmchan[index] = 4; 1494 break; 1495 case 5: 1496 data->pwmchan[index] = 6; 1497 break; 1498 case 6: 1499 data->pwmchan[index] = 7; 1500 break; 1501 } 1502 } 1503 } 1504 1505 static struct adt7475_data *adt7475_update_device(struct device *dev) 1506 { 1507 struct i2c_client *client = to_i2c_client(dev); 1508 struct adt7475_data *data = i2c_get_clientdata(client); 1509 u16 ext; 1510 int i; 1511 1512 mutex_lock(&data->lock); 1513 1514 /* Measurement values update every 2 seconds */ 1515 if (time_after(jiffies, data->measure_updated + HZ * 2) || 1516 !data->valid) { 1517 data->alarms = adt7475_read(REG_STATUS2) << 8; 1518 data->alarms |= adt7475_read(REG_STATUS1); 1519 1520 ext = (adt7475_read(REG_EXTEND2) << 8) | 1521 adt7475_read(REG_EXTEND1); 1522 for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { 1523 if (!(data->has_voltage & (1 << i))) 1524 continue; 1525 data->voltage[INPUT][i] = 1526 (adt7475_read(VOLTAGE_REG(i)) << 2) | 1527 ((ext >> (i * 2)) & 3); 1528 } 1529 1530 for (i = 0; i < ADT7475_TEMP_COUNT; i++) 1531 data->temp[INPUT][i] = 1532 (adt7475_read(TEMP_REG(i)) << 2) | 1533 ((ext >> ((i + 5) * 2)) & 3); 1534 1535 if (data->has_voltage & (1 << 5)) { 1536 data->alarms |= adt7475_read(REG_STATUS4) << 24; 1537 ext = adt7475_read(REG_EXTEND3); 1538 data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 | 1539 ((ext >> 4) & 3); 1540 } 1541 1542 for (i = 0; i < ADT7475_TACH_COUNT; i++) { 1543 if (i == 3 && !data->has_fan4) 1544 continue; 1545 data->tach[INPUT][i] = 1546 adt7475_read_word(client, TACH_REG(i)); 1547 } 1548 1549 /* Updated by hw when in auto mode */ 1550 for (i = 0; i < ADT7475_PWM_COUNT; i++) { 1551 if (i == 1 && !data->has_pwm2) 1552 continue; 1553 data->pwm[INPUT][i] = adt7475_read(PWM_REG(i)); 1554 } 1555 1556 if (data->has_vid) 1557 data->vid = adt7475_read(REG_VID) & 0x3f; 1558 1559 data->measure_updated = jiffies; 1560 } 1561 1562 /* Limits and settings, should never change update every 60 seconds */ 1563 if (time_after(jiffies, data->limits_updated + HZ * 60) || 1564 !data->valid) { 1565 data->config4 = adt7475_read(REG_CONFIG4); 1566 data->config5 = adt7475_read(REG_CONFIG5); 1567 1568 for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { 1569 if (!(data->has_voltage & (1 << i))) 1570 continue; 1571 /* Adjust values so they match the input precision */ 1572 data->voltage[MIN][i] = 1573 adt7475_read(VOLTAGE_MIN_REG(i)) << 2; 1574 data->voltage[MAX][i] = 1575 adt7475_read(VOLTAGE_MAX_REG(i)) << 2; 1576 } 1577 1578 if (data->has_voltage & (1 << 5)) { 1579 data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2; 1580 data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2; 1581 } 1582 1583 for (i = 0; i < ADT7475_TEMP_COUNT; i++) { 1584 /* Adjust values so they match the input precision */ 1585 data->temp[MIN][i] = 1586 adt7475_read(TEMP_MIN_REG(i)) << 2; 1587 data->temp[MAX][i] = 1588 adt7475_read(TEMP_MAX_REG(i)) << 2; 1589 data->temp[AUTOMIN][i] = 1590 adt7475_read(TEMP_TMIN_REG(i)) << 2; 1591 data->temp[THERM][i] = 1592 adt7475_read(TEMP_THERM_REG(i)) << 2; 1593 data->temp[OFFSET][i] = 1594 adt7475_read(TEMP_OFFSET_REG(i)); 1595 } 1596 adt7475_read_hystersis(client); 1597 1598 for (i = 0; i < ADT7475_TACH_COUNT; i++) { 1599 if (i == 3 && !data->has_fan4) 1600 continue; 1601 data->tach[MIN][i] = 1602 adt7475_read_word(client, TACH_MIN_REG(i)); 1603 } 1604 1605 for (i = 0; i < ADT7475_PWM_COUNT; i++) { 1606 if (i == 1 && !data->has_pwm2) 1607 continue; 1608 data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i)); 1609 data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i)); 1610 /* Set the channel and control information */ 1611 adt7475_read_pwm(client, i); 1612 } 1613 1614 data->range[0] = adt7475_read(TEMP_TRANGE_REG(0)); 1615 data->range[1] = adt7475_read(TEMP_TRANGE_REG(1)); 1616 data->range[2] = adt7475_read(TEMP_TRANGE_REG(2)); 1617 1618 data->limits_updated = jiffies; 1619 data->valid = 1; 1620 } 1621 1622 mutex_unlock(&data->lock); 1623 1624 return data; 1625 } 1626 1627 module_i2c_driver(adt7475_driver); 1628 1629 MODULE_AUTHOR("Advanced Micro Devices, Inc"); 1630 MODULE_DESCRIPTION("adt7475 driver"); 1631 MODULE_LICENSE("GPL"); 1632