1 /* 2 * adm9240.c Part of lm_sensors, Linux kernel modules for hardware 3 * monitoring 4 * 5 * Copyright (C) 1999 Frodo Looijaard <frodol@dds.nl> 6 * Philip Edelbrock <phil@netroedge.com> 7 * Copyright (C) 2003 Michiel Rook <michiel@grendelproject.nl> 8 * Copyright (C) 2005 Grant Coady <gcoady@gmail.com> with valuable 9 * guidance from Jean Delvare 10 * 11 * Driver supports Analog Devices ADM9240 12 * Dallas Semiconductor DS1780 13 * National Semiconductor LM81 14 * 15 * ADM9240 is the reference, DS1780 and LM81 are register compatibles 16 * 17 * Voltage Six inputs are scaled by chip, VID also reported 18 * Temperature Chip temperature to 0.5'C, maximum and max_hysteris 19 * Fans 2 fans, low speed alarm, automatic fan clock divider 20 * Alarms 16-bit map of active alarms 21 * Analog Out 0..1250 mV output 22 * 23 * Chassis Intrusion: clear CI latch with 'echo 1 > chassis_clear' 24 * 25 * Test hardware: Intel SE440BX-2 desktop motherboard --Grant 26 * 27 * LM81 extended temp reading not implemented 28 * 29 * This program is free software; you can redistribute it and/or modify 30 * it under the terms of the GNU General Public License as published by 31 * the Free Software Foundation; either version 2 of the License, or 32 * (at your option) any later version. 33 * 34 * This program is distributed in the hope that it will be useful, 35 * but WITHOUT ANY WARRANTY; without even the implied warranty of 36 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 37 * GNU General Public License for more details. 38 * 39 * You should have received a copy of the GNU General Public License 40 * along with this program; if not, write to the Free Software 41 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 42 */ 43 44 #include <linux/init.h> 45 #include <linux/module.h> 46 #include <linux/slab.h> 47 #include <linux/i2c.h> 48 #include <linux/hwmon-sysfs.h> 49 #include <linux/hwmon.h> 50 #include <linux/hwmon-vid.h> 51 #include <linux/err.h> 52 #include <linux/mutex.h> 53 54 /* Addresses to scan */ 55 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, 56 I2C_CLIENT_END }; 57 58 /* Insmod parameters */ 59 I2C_CLIENT_INSMOD_3(adm9240, ds1780, lm81); 60 61 /* ADM9240 registers */ 62 #define ADM9240_REG_MAN_ID 0x3e 63 #define ADM9240_REG_DIE_REV 0x3f 64 #define ADM9240_REG_CONFIG 0x40 65 66 #define ADM9240_REG_IN(nr) (0x20 + (nr)) /* 0..5 */ 67 #define ADM9240_REG_IN_MAX(nr) (0x2b + (nr) * 2) 68 #define ADM9240_REG_IN_MIN(nr) (0x2c + (nr) * 2) 69 #define ADM9240_REG_FAN(nr) (0x28 + (nr)) /* 0..1 */ 70 #define ADM9240_REG_FAN_MIN(nr) (0x3b + (nr)) 71 #define ADM9240_REG_INT(nr) (0x41 + (nr)) 72 #define ADM9240_REG_INT_MASK(nr) (0x43 + (nr)) 73 #define ADM9240_REG_TEMP 0x27 74 #define ADM9240_REG_TEMP_MAX(nr) (0x39 + (nr)) /* 0, 1 = high, hyst */ 75 #define ADM9240_REG_ANALOG_OUT 0x19 76 #define ADM9240_REG_CHASSIS_CLEAR 0x46 77 #define ADM9240_REG_VID_FAN_DIV 0x47 78 #define ADM9240_REG_I2C_ADDR 0x48 79 #define ADM9240_REG_VID4 0x49 80 #define ADM9240_REG_TEMP_CONF 0x4b 81 82 /* generalised scaling with integer rounding */ 83 static inline int SCALE(long val, int mul, int div) 84 { 85 if (val < 0) 86 return (val * mul - div / 2) / div; 87 else 88 return (val * mul + div / 2) / div; 89 } 90 91 /* adm9240 internally scales voltage measurements */ 92 static const u16 nom_mv[] = { 2500, 2700, 3300, 5000, 12000, 2700 }; 93 94 static inline unsigned int IN_FROM_REG(u8 reg, int n) 95 { 96 return SCALE(reg, nom_mv[n], 192); 97 } 98 99 static inline u8 IN_TO_REG(unsigned long val, int n) 100 { 101 return SENSORS_LIMIT(SCALE(val, 192, nom_mv[n]), 0, 255); 102 } 103 104 /* temperature range: -40..125, 127 disables temperature alarm */ 105 static inline s8 TEMP_TO_REG(long val) 106 { 107 return SENSORS_LIMIT(SCALE(val, 1, 1000), -40, 127); 108 } 109 110 /* two fans, each with low fan speed limit */ 111 static inline unsigned int FAN_FROM_REG(u8 reg, u8 div) 112 { 113 if (!reg) /* error */ 114 return -1; 115 116 if (reg == 255) 117 return 0; 118 119 return SCALE(1350000, 1, reg * div); 120 } 121 122 /* analog out 0..1250mV */ 123 static inline u8 AOUT_TO_REG(unsigned long val) 124 { 125 return SENSORS_LIMIT(SCALE(val, 255, 1250), 0, 255); 126 } 127 128 static inline unsigned int AOUT_FROM_REG(u8 reg) 129 { 130 return SCALE(reg, 1250, 255); 131 } 132 133 static int adm9240_attach_adapter(struct i2c_adapter *adapter); 134 static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind); 135 static void adm9240_init_client(struct i2c_client *client); 136 static int adm9240_detach_client(struct i2c_client *client); 137 static struct adm9240_data *adm9240_update_device(struct device *dev); 138 139 /* driver data */ 140 static struct i2c_driver adm9240_driver = { 141 .driver = { 142 .name = "adm9240", 143 }, 144 .id = I2C_DRIVERID_ADM9240, 145 .attach_adapter = adm9240_attach_adapter, 146 .detach_client = adm9240_detach_client, 147 }; 148 149 /* per client data */ 150 struct adm9240_data { 151 enum chips type; 152 struct i2c_client client; 153 struct class_device *class_dev; 154 struct mutex update_lock; 155 char valid; 156 unsigned long last_updated_measure; 157 unsigned long last_updated_config; 158 159 u8 in[6]; /* ro in0_input */ 160 u8 in_max[6]; /* rw in0_max */ 161 u8 in_min[6]; /* rw in0_min */ 162 u8 fan[2]; /* ro fan1_input */ 163 u8 fan_min[2]; /* rw fan1_min */ 164 u8 fan_div[2]; /* rw fan1_div, read-only accessor */ 165 s16 temp; /* ro temp1_input, 9-bit sign-extended */ 166 s8 temp_max[2]; /* rw 0 -> temp_max, 1 -> temp_max_hyst */ 167 u16 alarms; /* ro alarms */ 168 u8 aout; /* rw aout_output */ 169 u8 vid; /* ro vid */ 170 u8 vrm; /* -- vrm set on startup, no accessor */ 171 }; 172 173 /*** sysfs accessors ***/ 174 175 /* temperature */ 176 static ssize_t show_temp(struct device *dev, struct device_attribute *dummy, 177 char *buf) 178 { 179 struct adm9240_data *data = adm9240_update_device(dev); 180 return sprintf(buf, "%d\n", data->temp * 500); /* 9-bit value */ 181 } 182 183 static ssize_t show_max(struct device *dev, struct device_attribute *devattr, 184 char *buf) 185 { 186 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 187 struct adm9240_data *data = adm9240_update_device(dev); 188 return sprintf(buf, "%d\n", data->temp_max[attr->index] * 1000); 189 } 190 191 static ssize_t set_max(struct device *dev, struct device_attribute *devattr, 192 const char *buf, size_t count) 193 { 194 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 195 struct i2c_client *client = to_i2c_client(dev); 196 struct adm9240_data *data = i2c_get_clientdata(client); 197 long val = simple_strtol(buf, NULL, 10); 198 199 mutex_lock(&data->update_lock); 200 data->temp_max[attr->index] = TEMP_TO_REG(val); 201 i2c_smbus_write_byte_data(client, ADM9240_REG_TEMP_MAX(attr->index), 202 data->temp_max[attr->index]); 203 mutex_unlock(&data->update_lock); 204 return count; 205 } 206 207 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); 208 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, 209 show_max, set_max, 0); 210 static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, 211 show_max, set_max, 1); 212 213 /* voltage */ 214 static ssize_t show_in(struct device *dev, struct device_attribute *devattr, 215 char *buf) 216 { 217 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 218 struct adm9240_data *data = adm9240_update_device(dev); 219 return sprintf(buf, "%d\n", IN_FROM_REG(data->in[attr->index], 220 attr->index)); 221 } 222 223 static ssize_t show_in_min(struct device *dev, 224 struct device_attribute *devattr, char *buf) 225 { 226 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 227 struct adm9240_data *data = adm9240_update_device(dev); 228 return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[attr->index], 229 attr->index)); 230 } 231 232 static ssize_t show_in_max(struct device *dev, 233 struct device_attribute *devattr, char *buf) 234 { 235 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 236 struct adm9240_data *data = adm9240_update_device(dev); 237 return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[attr->index], 238 attr->index)); 239 } 240 241 static ssize_t set_in_min(struct device *dev, 242 struct device_attribute *devattr, 243 const char *buf, size_t count) 244 { 245 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 246 struct i2c_client *client = to_i2c_client(dev); 247 struct adm9240_data *data = i2c_get_clientdata(client); 248 unsigned long val = simple_strtoul(buf, NULL, 10); 249 250 mutex_lock(&data->update_lock); 251 data->in_min[attr->index] = IN_TO_REG(val, attr->index); 252 i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(attr->index), 253 data->in_min[attr->index]); 254 mutex_unlock(&data->update_lock); 255 return count; 256 } 257 258 static ssize_t set_in_max(struct device *dev, 259 struct device_attribute *devattr, 260 const char *buf, size_t count) 261 { 262 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 263 struct i2c_client *client = to_i2c_client(dev); 264 struct adm9240_data *data = i2c_get_clientdata(client); 265 unsigned long val = simple_strtoul(buf, NULL, 10); 266 267 mutex_lock(&data->update_lock); 268 data->in_max[attr->index] = IN_TO_REG(val, attr->index); 269 i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(attr->index), 270 data->in_max[attr->index]); 271 mutex_unlock(&data->update_lock); 272 return count; 273 } 274 275 #define vin(nr) \ 276 static SENSOR_DEVICE_ATTR(in##nr##_input, S_IRUGO, \ 277 show_in, NULL, nr); \ 278 static SENSOR_DEVICE_ATTR(in##nr##_min, S_IRUGO | S_IWUSR, \ 279 show_in_min, set_in_min, nr); \ 280 static SENSOR_DEVICE_ATTR(in##nr##_max, S_IRUGO | S_IWUSR, \ 281 show_in_max, set_in_max, nr); 282 283 vin(0); 284 vin(1); 285 vin(2); 286 vin(3); 287 vin(4); 288 vin(5); 289 290 /* fans */ 291 static ssize_t show_fan(struct device *dev, 292 struct device_attribute *devattr, char *buf) 293 { 294 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 295 struct adm9240_data *data = adm9240_update_device(dev); 296 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index], 297 1 << data->fan_div[attr->index])); 298 } 299 300 static ssize_t show_fan_min(struct device *dev, 301 struct device_attribute *devattr, char *buf) 302 { 303 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 304 struct adm9240_data *data = adm9240_update_device(dev); 305 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[attr->index], 306 1 << data->fan_div[attr->index])); 307 } 308 309 static ssize_t show_fan_div(struct device *dev, 310 struct device_attribute *devattr, char *buf) 311 { 312 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 313 struct adm9240_data *data = adm9240_update_device(dev); 314 return sprintf(buf, "%d\n", 1 << data->fan_div[attr->index]); 315 } 316 317 /* write new fan div, callers must hold data->update_lock */ 318 static void adm9240_write_fan_div(struct i2c_client *client, int nr, 319 u8 fan_div) 320 { 321 u8 reg, old, shift = (nr + 2) * 2; 322 323 reg = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); 324 old = (reg >> shift) & 3; 325 reg &= ~(3 << shift); 326 reg |= (fan_div << shift); 327 i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg); 328 dev_dbg(&client->dev, "fan%d clock divider changed from %u " 329 "to %u\n", nr + 1, 1 << old, 1 << fan_div); 330 } 331 332 /* 333 * set fan speed low limit: 334 * 335 * - value is zero: disable fan speed low limit alarm 336 * 337 * - value is below fan speed measurement range: enable fan speed low 338 * limit alarm to be asserted while fan speed too slow to measure 339 * 340 * - otherwise: select fan clock divider to suit fan speed low limit, 341 * measurement code may adjust registers to ensure fan speed reading 342 */ 343 static ssize_t set_fan_min(struct device *dev, 344 struct device_attribute *devattr, 345 const char *buf, size_t count) 346 { 347 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 348 struct i2c_client *client = to_i2c_client(dev); 349 struct adm9240_data *data = i2c_get_clientdata(client); 350 unsigned long val = simple_strtoul(buf, NULL, 10); 351 int nr = attr->index; 352 u8 new_div; 353 354 mutex_lock(&data->update_lock); 355 356 if (!val) { 357 data->fan_min[nr] = 255; 358 new_div = data->fan_div[nr]; 359 360 dev_dbg(&client->dev, "fan%u low limit set disabled\n", 361 nr + 1); 362 363 } else if (val < 1350000 / (8 * 254)) { 364 new_div = 3; 365 data->fan_min[nr] = 254; 366 367 dev_dbg(&client->dev, "fan%u low limit set minimum %u\n", 368 nr + 1, FAN_FROM_REG(254, 1 << new_div)); 369 370 } else { 371 unsigned int new_min = 1350000 / val; 372 373 new_div = 0; 374 while (new_min > 192 && new_div < 3) { 375 new_div++; 376 new_min /= 2; 377 } 378 if (!new_min) /* keep > 0 */ 379 new_min++; 380 381 data->fan_min[nr] = new_min; 382 383 dev_dbg(&client->dev, "fan%u low limit set fan speed %u\n", 384 nr + 1, FAN_FROM_REG(new_min, 1 << new_div)); 385 } 386 387 if (new_div != data->fan_div[nr]) { 388 data->fan_div[nr] = new_div; 389 adm9240_write_fan_div(client, nr, new_div); 390 } 391 i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr), 392 data->fan_min[nr]); 393 394 mutex_unlock(&data->update_lock); 395 return count; 396 } 397 398 #define fan(nr) \ 399 static SENSOR_DEVICE_ATTR(fan##nr##_input, S_IRUGO, \ 400 show_fan, NULL, nr - 1); \ 401 static SENSOR_DEVICE_ATTR(fan##nr##_div, S_IRUGO, \ 402 show_fan_div, NULL, nr - 1); \ 403 static SENSOR_DEVICE_ATTR(fan##nr##_min, S_IRUGO | S_IWUSR, \ 404 show_fan_min, set_fan_min, nr - 1); 405 406 fan(1); 407 fan(2); 408 409 /* alarms */ 410 static ssize_t show_alarms(struct device *dev, 411 struct device_attribute *attr, char *buf) 412 { 413 struct adm9240_data *data = adm9240_update_device(dev); 414 return sprintf(buf, "%u\n", data->alarms); 415 } 416 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); 417 418 /* vid */ 419 static ssize_t show_vid(struct device *dev, 420 struct device_attribute *attr, char *buf) 421 { 422 struct adm9240_data *data = adm9240_update_device(dev); 423 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); 424 } 425 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); 426 427 /* analog output */ 428 static ssize_t show_aout(struct device *dev, 429 struct device_attribute *attr, char *buf) 430 { 431 struct adm9240_data *data = adm9240_update_device(dev); 432 return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout)); 433 } 434 435 static ssize_t set_aout(struct device *dev, 436 struct device_attribute *attr, 437 const char *buf, size_t count) 438 { 439 struct i2c_client *client = to_i2c_client(dev); 440 struct adm9240_data *data = i2c_get_clientdata(client); 441 unsigned long val = simple_strtol(buf, NULL, 10); 442 443 mutex_lock(&data->update_lock); 444 data->aout = AOUT_TO_REG(val); 445 i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout); 446 mutex_unlock(&data->update_lock); 447 return count; 448 } 449 static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); 450 451 /* chassis_clear */ 452 static ssize_t chassis_clear(struct device *dev, 453 struct device_attribute *attr, 454 const char *buf, size_t count) 455 { 456 struct i2c_client *client = to_i2c_client(dev); 457 unsigned long val = simple_strtol(buf, NULL, 10); 458 459 if (val == 1) { 460 i2c_smbus_write_byte_data(client, 461 ADM9240_REG_CHASSIS_CLEAR, 0x80); 462 dev_dbg(&client->dev, "chassis intrusion latch cleared\n"); 463 } 464 return count; 465 } 466 static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear); 467 468 469 /*** sensor chip detect and driver install ***/ 470 471 static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) 472 { 473 struct i2c_client *new_client; 474 struct adm9240_data *data; 475 int err = 0; 476 const char *name = ""; 477 u8 man_id, die_rev; 478 479 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 480 goto exit; 481 482 if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) { 483 err = -ENOMEM; 484 goto exit; 485 } 486 487 new_client = &data->client; 488 i2c_set_clientdata(new_client, data); 489 new_client->addr = address; 490 new_client->adapter = adapter; 491 new_client->driver = &adm9240_driver; 492 new_client->flags = 0; 493 494 if (kind == 0) { 495 kind = adm9240; 496 } 497 498 if (kind < 0) { 499 500 /* verify chip: reg address should match i2c address */ 501 if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR) 502 != address) { 503 dev_err(&adapter->dev, "detect fail: address match, " 504 "0x%02x\n", address); 505 goto exit_free; 506 } 507 508 /* check known chip manufacturer */ 509 man_id = i2c_smbus_read_byte_data(new_client, 510 ADM9240_REG_MAN_ID); 511 if (man_id == 0x23) { 512 kind = adm9240; 513 } else if (man_id == 0xda) { 514 kind = ds1780; 515 } else if (man_id == 0x01) { 516 kind = lm81; 517 } else { 518 dev_err(&adapter->dev, "detect fail: unknown manuf, " 519 "0x%02x\n", man_id); 520 goto exit_free; 521 } 522 523 /* successful detect, print chip info */ 524 die_rev = i2c_smbus_read_byte_data(new_client, 525 ADM9240_REG_DIE_REV); 526 dev_info(&adapter->dev, "found %s revision %u\n", 527 man_id == 0x23 ? "ADM9240" : 528 man_id == 0xda ? "DS1780" : "LM81", die_rev); 529 } 530 531 /* either forced or detected chip kind */ 532 if (kind == adm9240) { 533 name = "adm9240"; 534 } else if (kind == ds1780) { 535 name = "ds1780"; 536 } else if (kind == lm81) { 537 name = "lm81"; 538 } 539 540 /* fill in the remaining client fields and attach */ 541 strlcpy(new_client->name, name, I2C_NAME_SIZE); 542 data->type = kind; 543 mutex_init(&data->update_lock); 544 545 if ((err = i2c_attach_client(new_client))) 546 goto exit_free; 547 548 adm9240_init_client(new_client); 549 550 /* populate sysfs filesystem */ 551 data->class_dev = hwmon_device_register(&new_client->dev); 552 if (IS_ERR(data->class_dev)) { 553 err = PTR_ERR(data->class_dev); 554 goto exit_detach; 555 } 556 557 device_create_file(&new_client->dev, 558 &sensor_dev_attr_in0_input.dev_attr); 559 device_create_file(&new_client->dev, 560 &sensor_dev_attr_in0_min.dev_attr); 561 device_create_file(&new_client->dev, 562 &sensor_dev_attr_in0_max.dev_attr); 563 device_create_file(&new_client->dev, 564 &sensor_dev_attr_in1_input.dev_attr); 565 device_create_file(&new_client->dev, 566 &sensor_dev_attr_in1_min.dev_attr); 567 device_create_file(&new_client->dev, 568 &sensor_dev_attr_in1_max.dev_attr); 569 device_create_file(&new_client->dev, 570 &sensor_dev_attr_in2_input.dev_attr); 571 device_create_file(&new_client->dev, 572 &sensor_dev_attr_in2_min.dev_attr); 573 device_create_file(&new_client->dev, 574 &sensor_dev_attr_in2_max.dev_attr); 575 device_create_file(&new_client->dev, 576 &sensor_dev_attr_in3_input.dev_attr); 577 device_create_file(&new_client->dev, 578 &sensor_dev_attr_in3_min.dev_attr); 579 device_create_file(&new_client->dev, 580 &sensor_dev_attr_in3_max.dev_attr); 581 device_create_file(&new_client->dev, 582 &sensor_dev_attr_in4_input.dev_attr); 583 device_create_file(&new_client->dev, 584 &sensor_dev_attr_in4_min.dev_attr); 585 device_create_file(&new_client->dev, 586 &sensor_dev_attr_in4_max.dev_attr); 587 device_create_file(&new_client->dev, 588 &sensor_dev_attr_in5_input.dev_attr); 589 device_create_file(&new_client->dev, 590 &sensor_dev_attr_in5_min.dev_attr); 591 device_create_file(&new_client->dev, 592 &sensor_dev_attr_in5_max.dev_attr); 593 device_create_file(&new_client->dev, &dev_attr_temp1_input); 594 device_create_file(&new_client->dev, 595 &sensor_dev_attr_temp1_max.dev_attr); 596 device_create_file(&new_client->dev, 597 &sensor_dev_attr_temp1_max_hyst.dev_attr); 598 device_create_file(&new_client->dev, 599 &sensor_dev_attr_fan1_input.dev_attr); 600 device_create_file(&new_client->dev, 601 &sensor_dev_attr_fan1_div.dev_attr); 602 device_create_file(&new_client->dev, 603 &sensor_dev_attr_fan1_min.dev_attr); 604 device_create_file(&new_client->dev, 605 &sensor_dev_attr_fan2_input.dev_attr); 606 device_create_file(&new_client->dev, 607 &sensor_dev_attr_fan2_div.dev_attr); 608 device_create_file(&new_client->dev, 609 &sensor_dev_attr_fan2_min.dev_attr); 610 device_create_file(&new_client->dev, &dev_attr_alarms); 611 device_create_file(&new_client->dev, &dev_attr_aout_output); 612 device_create_file(&new_client->dev, &dev_attr_chassis_clear); 613 device_create_file(&new_client->dev, &dev_attr_cpu0_vid); 614 615 return 0; 616 617 exit_detach: 618 i2c_detach_client(new_client); 619 exit_free: 620 kfree(data); 621 exit: 622 return err; 623 } 624 625 static int adm9240_attach_adapter(struct i2c_adapter *adapter) 626 { 627 if (!(adapter->class & I2C_CLASS_HWMON)) 628 return 0; 629 return i2c_probe(adapter, &addr_data, adm9240_detect); 630 } 631 632 static int adm9240_detach_client(struct i2c_client *client) 633 { 634 struct adm9240_data *data = i2c_get_clientdata(client); 635 int err; 636 637 hwmon_device_unregister(data->class_dev); 638 639 if ((err = i2c_detach_client(client))) 640 return err; 641 642 kfree(data); 643 return 0; 644 } 645 646 static void adm9240_init_client(struct i2c_client *client) 647 { 648 struct adm9240_data *data = i2c_get_clientdata(client); 649 u8 conf = i2c_smbus_read_byte_data(client, ADM9240_REG_CONFIG); 650 u8 mode = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_CONF) & 3; 651 652 data->vrm = vid_which_vrm(); /* need this to report vid as mV */ 653 654 dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10, 655 data->vrm % 10); 656 657 if (conf & 1) { /* measurement cycle running: report state */ 658 659 dev_info(&client->dev, "status: config 0x%02x mode %u\n", 660 conf, mode); 661 662 } else { /* cold start: open limits before starting chip */ 663 int i; 664 665 for (i = 0; i < 6; i++) 666 { 667 i2c_smbus_write_byte_data(client, 668 ADM9240_REG_IN_MIN(i), 0); 669 i2c_smbus_write_byte_data(client, 670 ADM9240_REG_IN_MAX(i), 255); 671 } 672 i2c_smbus_write_byte_data(client, 673 ADM9240_REG_FAN_MIN(0), 255); 674 i2c_smbus_write_byte_data(client, 675 ADM9240_REG_FAN_MIN(1), 255); 676 i2c_smbus_write_byte_data(client, 677 ADM9240_REG_TEMP_MAX(0), 127); 678 i2c_smbus_write_byte_data(client, 679 ADM9240_REG_TEMP_MAX(1), 127); 680 681 /* start measurement cycle */ 682 i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1); 683 684 dev_info(&client->dev, "cold start: config was 0x%02x " 685 "mode %u\n", conf, mode); 686 } 687 } 688 689 static struct adm9240_data *adm9240_update_device(struct device *dev) 690 { 691 struct i2c_client *client = to_i2c_client(dev); 692 struct adm9240_data *data = i2c_get_clientdata(client); 693 int i; 694 695 mutex_lock(&data->update_lock); 696 697 /* minimum measurement cycle: 1.75 seconds */ 698 if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4)) 699 || !data->valid) { 700 701 for (i = 0; i < 6; i++) /* read voltages */ 702 { 703 data->in[i] = i2c_smbus_read_byte_data(client, 704 ADM9240_REG_IN(i)); 705 } 706 data->alarms = i2c_smbus_read_byte_data(client, 707 ADM9240_REG_INT(0)) | 708 i2c_smbus_read_byte_data(client, 709 ADM9240_REG_INT(1)) << 8; 710 711 /* read temperature: assume temperature changes less than 712 * 0.5'C per two measurement cycles thus ignore possible 713 * but unlikely aliasing error on lsb reading. --Grant */ 714 data->temp = ((i2c_smbus_read_byte_data(client, 715 ADM9240_REG_TEMP) << 8) | 716 i2c_smbus_read_byte_data(client, 717 ADM9240_REG_TEMP_CONF)) / 128; 718 719 for (i = 0; i < 2; i++) /* read fans */ 720 { 721 data->fan[i] = i2c_smbus_read_byte_data(client, 722 ADM9240_REG_FAN(i)); 723 724 /* adjust fan clock divider on overflow */ 725 if (data->valid && data->fan[i] == 255 && 726 data->fan_div[i] < 3) { 727 728 adm9240_write_fan_div(client, i, 729 ++data->fan_div[i]); 730 731 /* adjust fan_min if active, but not to 0 */ 732 if (data->fan_min[i] < 255 && 733 data->fan_min[i] >= 2) 734 data->fan_min[i] /= 2; 735 } 736 } 737 data->last_updated_measure = jiffies; 738 } 739 740 /* minimum config reading cycle: 300 seconds */ 741 if (time_after(jiffies, data->last_updated_config + (HZ * 300)) 742 || !data->valid) { 743 744 for (i = 0; i < 6; i++) 745 { 746 data->in_min[i] = i2c_smbus_read_byte_data(client, 747 ADM9240_REG_IN_MIN(i)); 748 data->in_max[i] = i2c_smbus_read_byte_data(client, 749 ADM9240_REG_IN_MAX(i)); 750 } 751 for (i = 0; i < 2; i++) 752 { 753 data->fan_min[i] = i2c_smbus_read_byte_data(client, 754 ADM9240_REG_FAN_MIN(i)); 755 } 756 data->temp_max[0] = i2c_smbus_read_byte_data(client, 757 ADM9240_REG_TEMP_MAX(0)); 758 data->temp_max[1] = i2c_smbus_read_byte_data(client, 759 ADM9240_REG_TEMP_MAX(1)); 760 761 /* read fan divs and 5-bit VID */ 762 i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); 763 data->fan_div[0] = (i >> 4) & 3; 764 data->fan_div[1] = (i >> 6) & 3; 765 data->vid = i & 0x0f; 766 data->vid |= (i2c_smbus_read_byte_data(client, 767 ADM9240_REG_VID4) & 1) << 4; 768 /* read analog out */ 769 data->aout = i2c_smbus_read_byte_data(client, 770 ADM9240_REG_ANALOG_OUT); 771 772 data->last_updated_config = jiffies; 773 data->valid = 1; 774 } 775 mutex_unlock(&data->update_lock); 776 return data; 777 } 778 779 static int __init sensors_adm9240_init(void) 780 { 781 return i2c_add_driver(&adm9240_driver); 782 } 783 784 static void __exit sensors_adm9240_exit(void) 785 { 786 i2c_del_driver(&adm9240_driver); 787 } 788 789 MODULE_AUTHOR("Michiel Rook <michiel@grendelproject.nl>, " 790 "Grant Coady <gcoady@gmail.com> and others"); 791 MODULE_DESCRIPTION("ADM9240/DS1780/LM81 driver"); 792 MODULE_LICENSE("GPL"); 793 794 module_init(sensors_adm9240_init); 795 module_exit(sensors_adm9240_exit); 796 797