1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring 4 * 5 * Copyright (C) 2006 Corentin LABBE <clabbe.montjoie@gmail.com> 6 * 7 * Based on LM83 Driver by Jean Delvare <jdelvare@suse.de> 8 * 9 * Give only processor, motherboard temperatures and fan tachs 10 * Very rare chip please let me know if you use it 11 * 12 * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf 13 */ 14 15 #include <linux/module.h> 16 #include <linux/init.h> 17 #include <linux/slab.h> 18 #include <linux/jiffies.h> 19 #include <linux/i2c.h> 20 #include <linux/hwmon-sysfs.h> 21 #include <linux/hwmon.h> 22 #include <linux/err.h> 23 #include <linux/mutex.h> 24 25 /* 26 * Addresses to scan 27 */ 28 29 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 30 0x2e, 0x2f, I2C_CLIENT_END 31 }; 32 33 /* 34 * The ADM1029 registers 35 * Manufacturer ID is 0x41 for Analog Devices 36 */ 37 38 #define ADM1029_REG_MAN_ID 0x0D 39 #define ADM1029_REG_CHIP_ID 0x0E 40 #define ADM1029_REG_CONFIG 0x01 41 #define ADM1029_REG_NB_FAN_SUPPORT 0x02 42 43 #define ADM1029_REG_TEMP_DEVICES_INSTALLED 0x06 44 45 #define ADM1029_REG_LOCAL_TEMP 0xA0 46 #define ADM1029_REG_REMOTE1_TEMP 0xA1 47 #define ADM1029_REG_REMOTE2_TEMP 0xA2 48 49 #define ADM1029_REG_LOCAL_TEMP_HIGH 0x90 50 #define ADM1029_REG_REMOTE1_TEMP_HIGH 0x91 51 #define ADM1029_REG_REMOTE2_TEMP_HIGH 0x92 52 53 #define ADM1029_REG_LOCAL_TEMP_LOW 0x98 54 #define ADM1029_REG_REMOTE1_TEMP_LOW 0x99 55 #define ADM1029_REG_REMOTE2_TEMP_LOW 0x9A 56 57 #define ADM1029_REG_FAN1 0x70 58 #define ADM1029_REG_FAN2 0x71 59 60 #define ADM1029_REG_FAN1_MIN 0x78 61 #define ADM1029_REG_FAN2_MIN 0x79 62 63 #define ADM1029_REG_FAN1_CONFIG 0x68 64 #define ADM1029_REG_FAN2_CONFIG 0x69 65 66 #define TEMP_FROM_REG(val) ((val) * 1000) 67 68 #define DIV_FROM_REG(val) (1 << (((val) >> 6) - 1)) 69 70 /* Registers to be checked by adm1029_update_device() */ 71 static const u8 ADM1029_REG_TEMP[] = { 72 ADM1029_REG_LOCAL_TEMP, 73 ADM1029_REG_REMOTE1_TEMP, 74 ADM1029_REG_REMOTE2_TEMP, 75 ADM1029_REG_LOCAL_TEMP_HIGH, 76 ADM1029_REG_REMOTE1_TEMP_HIGH, 77 ADM1029_REG_REMOTE2_TEMP_HIGH, 78 ADM1029_REG_LOCAL_TEMP_LOW, 79 ADM1029_REG_REMOTE1_TEMP_LOW, 80 ADM1029_REG_REMOTE2_TEMP_LOW, 81 }; 82 83 static const u8 ADM1029_REG_FAN[] = { 84 ADM1029_REG_FAN1, 85 ADM1029_REG_FAN2, 86 ADM1029_REG_FAN1_MIN, 87 ADM1029_REG_FAN2_MIN, 88 }; 89 90 static const u8 ADM1029_REG_FAN_DIV[] = { 91 ADM1029_REG_FAN1_CONFIG, 92 ADM1029_REG_FAN2_CONFIG, 93 }; 94 95 /* 96 * Client data (each client gets its own) 97 */ 98 99 struct adm1029_data { 100 struct i2c_client *client; 101 struct mutex update_lock; /* protect register access */ 102 bool valid; /* false until following fields are valid */ 103 unsigned long last_updated; /* in jiffies */ 104 105 /* registers values, signed for temperature, unsigned for other stuff */ 106 s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)]; 107 u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)]; 108 u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)]; 109 }; 110 111 /* 112 * function that update the status of the chips (temperature for example) 113 */ 114 static struct adm1029_data *adm1029_update_device(struct device *dev) 115 { 116 struct adm1029_data *data = dev_get_drvdata(dev); 117 struct i2c_client *client = data->client; 118 119 mutex_lock(&data->update_lock); 120 /* 121 * Use the "cache" Luke, don't recheck values 122 * if there are already checked not a long time later 123 */ 124 if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { 125 int nr; 126 127 dev_dbg(&client->dev, "Updating adm1029 data\n"); 128 129 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) { 130 data->temp[nr] = 131 i2c_smbus_read_byte_data(client, 132 ADM1029_REG_TEMP[nr]); 133 } 134 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) { 135 data->fan[nr] = 136 i2c_smbus_read_byte_data(client, 137 ADM1029_REG_FAN[nr]); 138 } 139 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) { 140 data->fan_div[nr] = 141 i2c_smbus_read_byte_data(client, 142 ADM1029_REG_FAN_DIV[nr]); 143 } 144 145 data->last_updated = jiffies; 146 data->valid = true; 147 } 148 149 mutex_unlock(&data->update_lock); 150 151 return data; 152 } 153 154 /* 155 * Sysfs stuff 156 */ 157 158 static ssize_t 159 temp_show(struct device *dev, struct device_attribute *devattr, char *buf) 160 { 161 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 162 struct adm1029_data *data = adm1029_update_device(dev); 163 164 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); 165 } 166 167 static ssize_t 168 fan_show(struct device *dev, struct device_attribute *devattr, char *buf) 169 { 170 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 171 struct adm1029_data *data = adm1029_update_device(dev); 172 u16 val; 173 174 if (data->fan[attr->index] == 0 || 175 (data->fan_div[attr->index] & 0xC0) == 0 || 176 data->fan[attr->index] == 255) { 177 return sprintf(buf, "0\n"); 178 } 179 180 val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index]) 181 / data->fan[attr->index]; 182 return sprintf(buf, "%d\n", val); 183 } 184 185 static ssize_t 186 fan_div_show(struct device *dev, struct device_attribute *devattr, char *buf) 187 { 188 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 189 struct adm1029_data *data = adm1029_update_device(dev); 190 191 if ((data->fan_div[attr->index] & 0xC0) == 0) 192 return sprintf(buf, "0\n"); 193 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); 194 } 195 196 static ssize_t fan_div_store(struct device *dev, 197 struct device_attribute *devattr, 198 const char *buf, size_t count) 199 { 200 struct adm1029_data *data = dev_get_drvdata(dev); 201 struct i2c_client *client = data->client; 202 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 203 u8 reg; 204 long val; 205 int ret = kstrtol(buf, 10, &val); 206 207 if (ret < 0) 208 return ret; 209 210 mutex_lock(&data->update_lock); 211 212 /*Read actual config */ 213 reg = i2c_smbus_read_byte_data(client, 214 ADM1029_REG_FAN_DIV[attr->index]); 215 216 switch (val) { 217 case 1: 218 val = 1; 219 break; 220 case 2: 221 val = 2; 222 break; 223 case 4: 224 val = 3; 225 break; 226 default: 227 mutex_unlock(&data->update_lock); 228 dev_err(&client->dev, 229 "fan_div value %ld not supported. Choose one of 1, 2 or 4!\n", 230 val); 231 return -EINVAL; 232 } 233 /* Update the value */ 234 reg = (reg & 0x3F) | (val << 6); 235 236 /* Update the cache */ 237 data->fan_div[attr->index] = reg; 238 239 /* Write value */ 240 i2c_smbus_write_byte_data(client, 241 ADM1029_REG_FAN_DIV[attr->index], reg); 242 mutex_unlock(&data->update_lock); 243 244 return count; 245 } 246 247 /* Access rights on sysfs. */ 248 static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); 249 static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); 250 static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); 251 252 static SENSOR_DEVICE_ATTR_RO(temp1_max, temp, 3); 253 static SENSOR_DEVICE_ATTR_RO(temp2_max, temp, 4); 254 static SENSOR_DEVICE_ATTR_RO(temp3_max, temp, 5); 255 256 static SENSOR_DEVICE_ATTR_RO(temp1_min, temp, 6); 257 static SENSOR_DEVICE_ATTR_RO(temp2_min, temp, 7); 258 static SENSOR_DEVICE_ATTR_RO(temp3_min, temp, 8); 259 260 static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); 261 static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); 262 263 static SENSOR_DEVICE_ATTR_RO(fan1_min, fan, 2); 264 static SENSOR_DEVICE_ATTR_RO(fan2_min, fan, 3); 265 266 static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); 267 static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); 268 269 static struct attribute *adm1029_attrs[] = { 270 &sensor_dev_attr_temp1_input.dev_attr.attr, 271 &sensor_dev_attr_temp1_min.dev_attr.attr, 272 &sensor_dev_attr_temp1_max.dev_attr.attr, 273 &sensor_dev_attr_temp2_input.dev_attr.attr, 274 &sensor_dev_attr_temp2_min.dev_attr.attr, 275 &sensor_dev_attr_temp2_max.dev_attr.attr, 276 &sensor_dev_attr_temp3_input.dev_attr.attr, 277 &sensor_dev_attr_temp3_min.dev_attr.attr, 278 &sensor_dev_attr_temp3_max.dev_attr.attr, 279 &sensor_dev_attr_fan1_input.dev_attr.attr, 280 &sensor_dev_attr_fan2_input.dev_attr.attr, 281 &sensor_dev_attr_fan1_min.dev_attr.attr, 282 &sensor_dev_attr_fan2_min.dev_attr.attr, 283 &sensor_dev_attr_fan1_div.dev_attr.attr, 284 &sensor_dev_attr_fan2_div.dev_attr.attr, 285 NULL 286 }; 287 288 ATTRIBUTE_GROUPS(adm1029); 289 290 /* 291 * Real code 292 */ 293 294 /* Return 0 if detection is successful, -ENODEV otherwise */ 295 static int adm1029_detect(struct i2c_client *client, 296 struct i2c_board_info *info) 297 { 298 struct i2c_adapter *adapter = client->adapter; 299 u8 man_id, chip_id, temp_devices_installed, nb_fan_support; 300 301 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 302 return -ENODEV; 303 304 /* 305 * ADM1029 doesn't have CHIP ID, check just MAN ID 306 * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED, 307 * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values 308 * documented 309 */ 310 311 man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID); 312 chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID); 313 temp_devices_installed = i2c_smbus_read_byte_data(client, 314 ADM1029_REG_TEMP_DEVICES_INSTALLED); 315 nb_fan_support = i2c_smbus_read_byte_data(client, 316 ADM1029_REG_NB_FAN_SUPPORT); 317 /* 0x41 is Analog Devices */ 318 if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01 || 319 nb_fan_support != 0x03) 320 return -ENODEV; 321 322 if ((chip_id & 0xF0) != 0x00) { 323 /* 324 * There are no "official" CHIP ID, so actually 325 * we use Major/Minor revision for that 326 */ 327 pr_info("Unknown major revision %x, please let us know\n", 328 chip_id); 329 return -ENODEV; 330 } 331 332 strscpy(info->type, "adm1029", I2C_NAME_SIZE); 333 334 return 0; 335 } 336 337 static int adm1029_init_client(struct i2c_client *client) 338 { 339 u8 config; 340 341 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); 342 if ((config & 0x10) == 0) { 343 i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG, 344 config | 0x10); 345 } 346 /* recheck config */ 347 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); 348 if ((config & 0x10) == 0) { 349 dev_err(&client->dev, "Initialization failed!\n"); 350 return 0; 351 } 352 return 1; 353 } 354 355 static int adm1029_probe(struct i2c_client *client) 356 { 357 struct device *dev = &client->dev; 358 struct adm1029_data *data; 359 struct device *hwmon_dev; 360 361 data = devm_kzalloc(dev, sizeof(struct adm1029_data), GFP_KERNEL); 362 if (!data) 363 return -ENOMEM; 364 365 data->client = client; 366 mutex_init(&data->update_lock); 367 368 /* 369 * Initialize the ADM1029 chip 370 * Check config register 371 */ 372 if (adm1029_init_client(client) == 0) 373 return -ENODEV; 374 375 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, 376 data, 377 adm1029_groups); 378 return PTR_ERR_OR_ZERO(hwmon_dev); 379 } 380 381 static const struct i2c_device_id adm1029_id[] = { 382 { "adm1029" }, 383 { } 384 }; 385 MODULE_DEVICE_TABLE(i2c, adm1029_id); 386 387 static struct i2c_driver adm1029_driver = { 388 .class = I2C_CLASS_HWMON, 389 .driver = { 390 .name = "adm1029", 391 }, 392 .probe = adm1029_probe, 393 .id_table = adm1029_id, 394 .detect = adm1029_detect, 395 .address_list = normal_i2c, 396 }; 397 398 module_i2c_driver(adm1029_driver); 399 400 MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>"); 401 MODULE_DESCRIPTION("adm1029 driver"); 402 MODULE_LICENSE("GPL v2"); 403