1 /* 2 * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring 3 * 4 * Copyright (C) 2006 Corentin LABBE <clabbe.montjoie@gmail.com> 5 * 6 * Based on LM83 Driver by Jean Delvare <jdelvare@suse.de> 7 * 8 * Give only processor, motherboard temperatures and fan tachs 9 * Very rare chip please let me know if you use it 10 * 11 * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf 12 * 13 * 14 * This program is free software; you can redistribute it and/or modify 15 * it under the terms of the GNU General Public License as published by 16 * the Free Software Foundation version 2 of the License 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 26 */ 27 28 #include <linux/module.h> 29 #include <linux/init.h> 30 #include <linux/slab.h> 31 #include <linux/jiffies.h> 32 #include <linux/i2c.h> 33 #include <linux/hwmon-sysfs.h> 34 #include <linux/hwmon.h> 35 #include <linux/err.h> 36 #include <linux/mutex.h> 37 38 /* 39 * Addresses to scan 40 */ 41 42 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 43 0x2e, 0x2f, I2C_CLIENT_END 44 }; 45 46 /* 47 * The ADM1029 registers 48 * Manufacturer ID is 0x41 for Analog Devices 49 */ 50 51 #define ADM1029_REG_MAN_ID 0x0D 52 #define ADM1029_REG_CHIP_ID 0x0E 53 #define ADM1029_REG_CONFIG 0x01 54 #define ADM1029_REG_NB_FAN_SUPPORT 0x02 55 56 #define ADM1029_REG_TEMP_DEVICES_INSTALLED 0x06 57 58 #define ADM1029_REG_LOCAL_TEMP 0xA0 59 #define ADM1029_REG_REMOTE1_TEMP 0xA1 60 #define ADM1029_REG_REMOTE2_TEMP 0xA2 61 62 #define ADM1029_REG_LOCAL_TEMP_HIGH 0x90 63 #define ADM1029_REG_REMOTE1_TEMP_HIGH 0x91 64 #define ADM1029_REG_REMOTE2_TEMP_HIGH 0x92 65 66 #define ADM1029_REG_LOCAL_TEMP_LOW 0x98 67 #define ADM1029_REG_REMOTE1_TEMP_LOW 0x99 68 #define ADM1029_REG_REMOTE2_TEMP_LOW 0x9A 69 70 #define ADM1029_REG_FAN1 0x70 71 #define ADM1029_REG_FAN2 0x71 72 73 #define ADM1029_REG_FAN1_MIN 0x78 74 #define ADM1029_REG_FAN2_MIN 0x79 75 76 #define ADM1029_REG_FAN1_CONFIG 0x68 77 #define ADM1029_REG_FAN2_CONFIG 0x69 78 79 #define TEMP_FROM_REG(val) ((val) * 1000) 80 81 #define DIV_FROM_REG(val) (1 << (((val) >> 6) - 1)) 82 83 /* Registers to be checked by adm1029_update_device() */ 84 static const u8 ADM1029_REG_TEMP[] = { 85 ADM1029_REG_LOCAL_TEMP, 86 ADM1029_REG_REMOTE1_TEMP, 87 ADM1029_REG_REMOTE2_TEMP, 88 ADM1029_REG_LOCAL_TEMP_HIGH, 89 ADM1029_REG_REMOTE1_TEMP_HIGH, 90 ADM1029_REG_REMOTE2_TEMP_HIGH, 91 ADM1029_REG_LOCAL_TEMP_LOW, 92 ADM1029_REG_REMOTE1_TEMP_LOW, 93 ADM1029_REG_REMOTE2_TEMP_LOW, 94 }; 95 96 static const u8 ADM1029_REG_FAN[] = { 97 ADM1029_REG_FAN1, 98 ADM1029_REG_FAN2, 99 ADM1029_REG_FAN1_MIN, 100 ADM1029_REG_FAN2_MIN, 101 }; 102 103 static const u8 ADM1029_REG_FAN_DIV[] = { 104 ADM1029_REG_FAN1_CONFIG, 105 ADM1029_REG_FAN2_CONFIG, 106 }; 107 108 /* 109 * Functions declaration 110 */ 111 112 static int adm1029_probe(struct i2c_client *client, 113 const struct i2c_device_id *id); 114 static int adm1029_detect(struct i2c_client *client, 115 struct i2c_board_info *info); 116 static int adm1029_remove(struct i2c_client *client); 117 static struct adm1029_data *adm1029_update_device(struct device *dev); 118 static int adm1029_init_client(struct i2c_client *client); 119 120 /* 121 * Driver data (common to all clients) 122 */ 123 124 static const struct i2c_device_id adm1029_id[] = { 125 { "adm1029", 0 }, 126 { } 127 }; 128 MODULE_DEVICE_TABLE(i2c, adm1029_id); 129 130 static struct i2c_driver adm1029_driver = { 131 .class = I2C_CLASS_HWMON, 132 .driver = { 133 .name = "adm1029", 134 }, 135 .probe = adm1029_probe, 136 .remove = adm1029_remove, 137 .id_table = adm1029_id, 138 .detect = adm1029_detect, 139 .address_list = normal_i2c, 140 }; 141 142 /* 143 * Client data (each client gets its own) 144 */ 145 146 struct adm1029_data { 147 struct device *hwmon_dev; 148 struct mutex update_lock; 149 char valid; /* zero until following fields are valid */ 150 unsigned long last_updated; /* in jiffies */ 151 152 /* registers values, signed for temperature, unsigned for other stuff */ 153 s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)]; 154 u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)]; 155 u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)]; 156 }; 157 158 /* 159 * Sysfs stuff 160 */ 161 162 static ssize_t 163 show_temp(struct device *dev, struct device_attribute *devattr, char *buf) 164 { 165 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 166 struct adm1029_data *data = adm1029_update_device(dev); 167 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); 168 } 169 170 static ssize_t 171 show_fan(struct device *dev, struct device_attribute *devattr, char *buf) 172 { 173 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 174 struct adm1029_data *data = adm1029_update_device(dev); 175 u16 val; 176 if (data->fan[attr->index] == 0 177 || (data->fan_div[attr->index] & 0xC0) == 0 178 || data->fan[attr->index] == 255) { 179 return sprintf(buf, "0\n"); 180 } 181 182 val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index]) 183 / data->fan[attr->index]; 184 return sprintf(buf, "%d\n", val); 185 } 186 187 static ssize_t 188 show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) 189 { 190 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 191 struct adm1029_data *data = adm1029_update_device(dev); 192 if ((data->fan_div[attr->index] & 0xC0) == 0) 193 return sprintf(buf, "0\n"); 194 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); 195 } 196 197 static ssize_t set_fan_div(struct device *dev, 198 struct device_attribute *devattr, const char *buf, size_t count) 199 { 200 struct i2c_client *client = to_i2c_client(dev); 201 struct adm1029_data *data = i2c_get_clientdata(client); 202 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 203 u8 reg; 204 long val; 205 int ret = kstrtol(buf, 10, &val); 206 if (ret < 0) 207 return ret; 208 209 mutex_lock(&data->update_lock); 210 211 /*Read actual config */ 212 reg = i2c_smbus_read_byte_data(client, 213 ADM1029_REG_FAN_DIV[attr->index]); 214 215 switch (val) { 216 case 1: 217 val = 1; 218 break; 219 case 2: 220 val = 2; 221 break; 222 case 4: 223 val = 3; 224 break; 225 default: 226 mutex_unlock(&data->update_lock); 227 dev_err(&client->dev, 228 "fan_div value %ld not supported. Choose one of 1, 2 or 4!\n", 229 val); 230 return -EINVAL; 231 } 232 /* Update the value */ 233 reg = (reg & 0x3F) | (val << 6); 234 235 /* Update the cache */ 236 data->fan_div[attr->index] = reg; 237 238 /* Write value */ 239 i2c_smbus_write_byte_data(client, 240 ADM1029_REG_FAN_DIV[attr->index], reg); 241 mutex_unlock(&data->update_lock); 242 243 return count; 244 } 245 246 /* 247 * Access rights on sysfs. S_IRUGO: Is Readable by User, Group and Others 248 * S_IWUSR: Is Writable by User. 249 */ 250 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); 251 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); 252 static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); 253 254 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 3); 255 static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp, NULL, 4); 256 static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp, NULL, 5); 257 258 static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, NULL, 6); 259 static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp, NULL, 7); 260 static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp, NULL, 8); 261 262 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); 263 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); 264 265 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan, NULL, 2); 266 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan, NULL, 3); 267 268 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, 269 show_fan_div, set_fan_div, 0); 270 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, 271 show_fan_div, set_fan_div, 1); 272 273 static struct attribute *adm1029_attributes[] = { 274 &sensor_dev_attr_temp1_input.dev_attr.attr, 275 &sensor_dev_attr_temp1_min.dev_attr.attr, 276 &sensor_dev_attr_temp1_max.dev_attr.attr, 277 &sensor_dev_attr_temp2_input.dev_attr.attr, 278 &sensor_dev_attr_temp2_min.dev_attr.attr, 279 &sensor_dev_attr_temp2_max.dev_attr.attr, 280 &sensor_dev_attr_temp3_input.dev_attr.attr, 281 &sensor_dev_attr_temp3_min.dev_attr.attr, 282 &sensor_dev_attr_temp3_max.dev_attr.attr, 283 &sensor_dev_attr_fan1_input.dev_attr.attr, 284 &sensor_dev_attr_fan2_input.dev_attr.attr, 285 &sensor_dev_attr_fan1_min.dev_attr.attr, 286 &sensor_dev_attr_fan2_min.dev_attr.attr, 287 &sensor_dev_attr_fan1_div.dev_attr.attr, 288 &sensor_dev_attr_fan2_div.dev_attr.attr, 289 NULL 290 }; 291 292 static const struct attribute_group adm1029_group = { 293 .attrs = adm1029_attributes, 294 }; 295 296 /* 297 * Real code 298 */ 299 300 /* Return 0 if detection is successful, -ENODEV otherwise */ 301 static int adm1029_detect(struct i2c_client *client, 302 struct i2c_board_info *info) 303 { 304 struct i2c_adapter *adapter = client->adapter; 305 u8 man_id, chip_id, temp_devices_installed, nb_fan_support; 306 307 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 308 return -ENODEV; 309 310 /* 311 * ADM1029 doesn't have CHIP ID, check just MAN ID 312 * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED, 313 * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values 314 * documented 315 */ 316 317 man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID); 318 chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID); 319 temp_devices_installed = i2c_smbus_read_byte_data(client, 320 ADM1029_REG_TEMP_DEVICES_INSTALLED); 321 nb_fan_support = i2c_smbus_read_byte_data(client, 322 ADM1029_REG_NB_FAN_SUPPORT); 323 /* 0x41 is Analog Devices */ 324 if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01 325 || nb_fan_support != 0x03) 326 return -ENODEV; 327 328 if ((chip_id & 0xF0) != 0x00) { 329 /* 330 * There are no "official" CHIP ID, so actually 331 * we use Major/Minor revision for that 332 */ 333 pr_info("Unknown major revision %x, please let us know\n", 334 chip_id); 335 return -ENODEV; 336 } 337 338 strlcpy(info->type, "adm1029", I2C_NAME_SIZE); 339 340 return 0; 341 } 342 343 static int adm1029_probe(struct i2c_client *client, 344 const struct i2c_device_id *id) 345 { 346 struct adm1029_data *data; 347 int err; 348 349 data = devm_kzalloc(&client->dev, sizeof(struct adm1029_data), 350 GFP_KERNEL); 351 if (!data) 352 return -ENOMEM; 353 354 i2c_set_clientdata(client, data); 355 mutex_init(&data->update_lock); 356 357 /* 358 * Initialize the ADM1029 chip 359 * Check config register 360 */ 361 if (adm1029_init_client(client) == 0) 362 return -ENODEV; 363 364 /* Register sysfs hooks */ 365 err = sysfs_create_group(&client->dev.kobj, &adm1029_group); 366 if (err) 367 return err; 368 369 data->hwmon_dev = hwmon_device_register(&client->dev); 370 if (IS_ERR(data->hwmon_dev)) { 371 err = PTR_ERR(data->hwmon_dev); 372 goto exit_remove_files; 373 } 374 375 return 0; 376 377 exit_remove_files: 378 sysfs_remove_group(&client->dev.kobj, &adm1029_group); 379 return err; 380 } 381 382 static int adm1029_init_client(struct i2c_client *client) 383 { 384 u8 config; 385 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); 386 if ((config & 0x10) == 0) { 387 i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG, 388 config | 0x10); 389 } 390 /* recheck config */ 391 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); 392 if ((config & 0x10) == 0) { 393 dev_err(&client->dev, "Initialization failed!\n"); 394 return 0; 395 } 396 return 1; 397 } 398 399 static int adm1029_remove(struct i2c_client *client) 400 { 401 struct adm1029_data *data = i2c_get_clientdata(client); 402 403 hwmon_device_unregister(data->hwmon_dev); 404 sysfs_remove_group(&client->dev.kobj, &adm1029_group); 405 406 return 0; 407 } 408 409 /* 410 * function that update the status of the chips (temperature for example) 411 */ 412 static struct adm1029_data *adm1029_update_device(struct device *dev) 413 { 414 struct i2c_client *client = to_i2c_client(dev); 415 struct adm1029_data *data = i2c_get_clientdata(client); 416 417 mutex_lock(&data->update_lock); 418 /* 419 * Use the "cache" Luke, don't recheck values 420 * if there are already checked not a long time later 421 */ 422 if (time_after(jiffies, data->last_updated + HZ * 2) 423 || !data->valid) { 424 int nr; 425 426 dev_dbg(&client->dev, "Updating adm1029 data\n"); 427 428 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) { 429 data->temp[nr] = 430 i2c_smbus_read_byte_data(client, 431 ADM1029_REG_TEMP[nr]); 432 } 433 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) { 434 data->fan[nr] = 435 i2c_smbus_read_byte_data(client, 436 ADM1029_REG_FAN[nr]); 437 } 438 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) { 439 data->fan_div[nr] = 440 i2c_smbus_read_byte_data(client, 441 ADM1029_REG_FAN_DIV[nr]); 442 } 443 444 data->last_updated = jiffies; 445 data->valid = 1; 446 } 447 448 mutex_unlock(&data->update_lock); 449 450 return data; 451 } 452 453 module_i2c_driver(adm1029_driver); 454 455 MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>"); 456 MODULE_DESCRIPTION("adm1029 driver"); 457 MODULE_LICENSE("GPL v2"); 458