1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1025 109 tristate "Analog Devices ADM1025 and compatibles" 110 depends on I2C 111 select HWMON_VID 112 help 113 If you say yes here you get support for Analog Devices ADM1025 114 and Philips NE1619 sensor chips. 115 116 This driver can also be built as a module. If so, the module 117 will be called adm1025. 118 119config SENSORS_ADM1026 120 tristate "Analog Devices ADM1026 and compatibles" 121 depends on I2C 122 select HWMON_VID 123 help 124 If you say yes here you get support for Analog Devices ADM1026 125 sensor chip. 126 127 This driver can also be built as a module. If so, the module 128 will be called adm1026. 129 130config SENSORS_ADM1029 131 tristate "Analog Devices ADM1029" 132 depends on I2C 133 help 134 If you say yes here you get support for Analog Devices ADM1029 135 sensor chip. 136 Very rare chip, please let us know you use it. 137 138 This driver can also be built as a module. If so, the module 139 will be called adm1029. 140 141config SENSORS_ADM1031 142 tristate "Analog Devices ADM1031 and compatibles" 143 depends on I2C 144 help 145 If you say yes here you get support for Analog Devices ADM1031 146 and ADM1030 sensor chips. 147 148 This driver can also be built as a module. If so, the module 149 will be called adm1031. 150 151config SENSORS_ADM1177 152 tristate "Analog Devices ADM1177 and compatibles" 153 depends on I2C 154 help 155 If you say yes here you get support for Analog Devices ADM1177 156 sensor chips. 157 158 This driver can also be built as a module. If so, the module 159 will be called adm1177. 160 161config SENSORS_ADM9240 162 tristate "Analog Devices ADM9240 and compatibles" 163 depends on I2C 164 select HWMON_VID 165 select REGMAP_I2C 166 help 167 If you say yes here you get support for Analog Devices ADM9240, 168 Dallas DS1780, National Semiconductor LM81 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm9240. 172 173config SENSORS_ADT7X10 174 tristate 175 select REGMAP 176 help 177 This module contains common code shared by the ADT7310/ADT7320 and 178 ADT7410/ADT7420 temperature monitoring chip drivers. 179 180 If built as a module, the module will be called adt7x10. 181 182config SENSORS_ADT7310 183 tristate "Analog Devices ADT7310/ADT7320" 184 depends on SPI_MASTER 185 select SENSORS_ADT7X10 186 help 187 If you say yes here you get support for the Analog Devices 188 ADT7310 and ADT7320 temperature monitoring chips. 189 190 This driver can also be built as a module. If so, the module 191 will be called adt7310. 192 193config SENSORS_ADT7410 194 tristate "Analog Devices ADT7410/ADT7420" 195 depends on I2C 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7410 and ADT7420 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7410. 203 204config SENSORS_ADT7411 205 tristate "Analog Devices ADT7411" 206 depends on I2C 207 help 208 If you say yes here you get support for the Analog Devices 209 ADT7411 voltage and temperature monitoring chip. 210 211 This driver can also be built as a module. If so, the module 212 will be called adt7411. 213 214config SENSORS_ADT7462 215 tristate "Analog Devices ADT7462" 216 depends on I2C 217 help 218 If you say yes here you get support for the Analog Devices 219 ADT7462 temperature monitoring chips. 220 221 This driver can also be built as a module. If so, the module 222 will be called adt7462. 223 224config SENSORS_ADT7470 225 tristate "Analog Devices ADT7470" 226 depends on I2C 227 select REGMAP_I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7470 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7470. 234 235config SENSORS_ADT7475 236 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 237 depends on I2C 238 select HWMON_VID 239 help 240 If you say yes here you get support for the Analog Devices 241 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 242 chips. 243 244 This driver can also be built as a module. If so, the module 245 will be called adt7475. 246 247config SENSORS_AHT10 248 tristate "Aosong AHT10, AHT20" 249 depends on I2C 250 select CRC8 251 help 252 If you say yes here, you get support for the Aosong AHT10 and AHT20 253 temperature and humidity sensors 254 255 This driver can also be built as a module. If so, the module 256 will be called aht10. 257 258config SENSORS_AQUACOMPUTER_D5NEXT 259 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 260 depends on USB_HID 261 select CRC16 262 help 263 If you say yes here you get support for sensors and fans of 264 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 265 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 266 Next sensor, where available. 267 268 This driver can also be built as a module. If so, the module 269 will be called aquacomputer_d5next. 270 271config SENSORS_AS370 272 tristate "Synaptics AS370 SoC hardware monitoring driver" 273 help 274 If you say yes here you get support for the PVT sensors of 275 the Synaptics AS370 SoC 276 277 This driver can also be built as a module. If so, the module 278 will be called as370-hwmon. 279 280 281config SENSORS_ASC7621 282 tristate "Andigilog aSC7621" 283 depends on I2C 284 help 285 If you say yes here you get support for the aSC7621 286 family of SMBus sensors chip found on most Intel X38, X48, X58, 287 945, 965 and 975 desktop boards. Currently supported chips: 288 aSC7621 289 aSC7621a 290 291 This driver can also be built as a module. If so, the module 292 will be called asc7621. 293 294config SENSORS_ASUS_ROG_RYUJIN 295 tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver" 296 depends on HID 297 help 298 If you say yes here you get support for the fans and sensors of 299 the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler. 300 301 This driver can also be built as a module. If so, the module 302 will be called asus_rog_ryujin. 303 304config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NODE 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338config SENSORS_FAM15H_POWER 339 tristate "AMD Family 15h processor power" 340 depends on X86 && PCI && CPU_SUP_AMD 341 help 342 If you say yes here you get support for processor power 343 information of your AMD family 15h CPU. 344 345 This driver can also be built as a module. If so, the module 346 will be called fam15h_power. 347 348config SENSORS_APPLESMC 349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 350 depends on INPUT && X86 351 select NEW_LEDS 352 select LEDS_CLASS 353 help 354 This driver provides support for the Apple System Management 355 Controller, which provides an accelerometer (Apple Sudden Motion 356 Sensor), light sensors, temperature sensors, keyboard backlight 357 control and fan control. 358 359 Only Intel-based Apple's computers are supported (MacBook Pro, 360 MacBook, MacMini). 361 362 Data from the different sensors, keyboard backlight control and fan 363 control are accessible via sysfs. 364 365 This driver also provides an absolute input class device, allowing 366 the laptop to act as a pinball machine-esque joystick. 367 368 Say Y here if you have an applicable laptop and want to experience 369 the awesome power of applesmc. 370 371config SENSORS_ARM_SCMI 372 tristate "ARM SCMI Sensors" 373 depends on ARM_SCMI_PROTOCOL 374 depends on THERMAL || !THERMAL_OF 375 help 376 This driver provides support for temperature, voltage, current 377 and power sensors available on SCMI based platforms. The actual 378 number and type of sensors exported depend on the platform. 379 380 This driver can also be built as a module. If so, the module 381 will be called scmi-hwmon. 382 383config SENSORS_ARM_SCPI 384 tristate "ARM SCPI Sensors" 385 depends on ARM_SCPI_PROTOCOL 386 depends on THERMAL || !THERMAL_OF 387 help 388 This driver provides support for temperature, voltage, current 389 and power sensors available on ARM Ltd's SCP based platforms. The 390 actual number and type of sensors exported depend on the platform. 391 392config SENSORS_ASB100 393 tristate "Asus ASB100 Bach" 394 depends on (X86 || COMPILE_TEST) && I2C 395 select HWMON_VID 396 help 397 If you say yes here you get support for the ASB100 Bach sensor 398 chip found on some Asus mainboards. 399 400 This driver can also be built as a module. If so, the module 401 will be called asb100. 402 403config SENSORS_ASPEED 404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 405 depends on ARCH_ASPEED || COMPILE_TEST 406 depends on THERMAL || THERMAL=n 407 select REGMAP 408 help 409 This driver provides support for ASPEED AST2400/AST2500 PWM 410 and Fan Tacho controllers. 411 412 This driver can also be built as a module. If so, the module 413 will be called aspeed_pwm_tacho. 414 415config SENSORS_ASPEED_G6 416 tristate "ASPEED G6 PWM and Fan tach driver" 417 depends on ARCH_ASPEED || COMPILE_TEST 418 depends on PWM 419 help 420 This driver provides support for ASPEED G6 PWM and Fan Tach 421 controllers. 422 423 This driver can also be built as a module. If so, the module 424 will be called aspeed_g6_pwm_tach. 425 426config SENSORS_ATXP1 427 tristate "Attansic ATXP1 VID controller" 428 depends on I2C 429 select HWMON_VID 430 help 431 If you say yes here you get support for the Attansic ATXP1 VID 432 controller. 433 434 If your board have such a chip, you are able to control your CPU 435 core and other voltages. 436 437 This driver can also be built as a module. If so, the module 438 will be called atxp1. 439 440config SENSORS_BT1_PVT 441 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 442 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 443 select POLYNOMIAL 444 help 445 If you say yes here you get support for Baikal-T1 PVT sensor 446 embedded into the SoC. 447 448 This driver can also be built as a module. If so, the module will be 449 called bt1-pvt. 450 451config SENSORS_BT1_PVT_ALARMS 452 bool "Enable Baikal-T1 PVT sensor alarms" 453 depends on SENSORS_BT1_PVT 454 help 455 Baikal-T1 PVT IP-block provides threshold registers for each 456 supported sensor. But the corresponding interrupts might be 457 generated by the thresholds comparator only in synchronization with 458 a data conversion. Additionally there is only one sensor data can 459 be converted at a time. All of these makes the interface impossible 460 to be used for the hwmon alarms implementation without periodic 461 switch between the PVT sensors. By default the data conversion is 462 performed on demand from the user-space. If this config is enabled 463 the data conversion will be periodically performed and the data will be 464 saved in the internal driver cache. 465 466config SENSORS_CHIPCAP2 467 tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" 468 depends on I2C 469 help 470 Say yes here to build support for the Amphenol ChipCap 2 471 relative humidity and temperature sensor. 472 473 To compile this driver as a module, choose M here: the module 474 will be called chipcap2. 475 476config SENSORS_CORSAIR_CPRO 477 tristate "Corsair Commander Pro controller" 478 depends on HID 479 help 480 If you say yes here you get support for the Corsair Commander Pro 481 controller. 482 483 This driver can also be built as a module. If so, the module 484 will be called corsair-cpro. 485 486config SENSORS_CORSAIR_PSU 487 tristate "Corsair PSU HID controller" 488 depends on HID 489 help 490 If you say yes here you get support for Corsair PSUs with a HID 491 interface. 492 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 493 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 494 by Corsair. 495 496 This driver can also be built as a module. If so, the module 497 will be called corsair-psu. 498 499config SENSORS_CROS_EC 500 tristate "ChromeOS Embedded Controller sensors" 501 depends on MFD_CROS_EC_DEV 502 default MFD_CROS_EC_DEV 503 help 504 If you say yes here you get support for ChromeOS Embedded Controller 505 sensors. 506 507 This driver can also be built as a module. If so, the module 508 will be called cros_ec_hwmon. 509 510config SENSORS_DRIVETEMP 511 tristate "Hard disk drives with temperature sensors" 512 depends on SCSI && ATA 513 help 514 If you say yes you get support for the temperature sensor on 515 hard disk drives. 516 517 This driver can also be built as a module. If so, the module 518 will be called drivetemp. 519 520config SENSORS_DS620 521 tristate "Dallas Semiconductor DS620" 522 depends on I2C 523 help 524 If you say yes here you get support for Dallas Semiconductor 525 DS620 sensor chip. 526 527 This driver can also be built as a module. If so, the module 528 will be called ds620. 529 530config SENSORS_DS1621 531 tristate "Dallas Semiconductor DS1621 and compatibles" 532 depends on I2C 533 help 534 If you say yes here you get support for Dallas Semiconductor/Maxim 535 Integrated DS1621 sensor chips and compatible models including: 536 537 - Dallas Semiconductor DS1625 538 - Maxim Integrated DS1631 539 - Maxim Integrated DS1721 540 - Maxim Integrated DS1731 541 542 This driver can also be built as a module. If so, the module 543 will be called ds1621. 544 545config SENSORS_DELL_SMM 546 tristate "Dell laptop SMM BIOS hwmon driver" 547 depends on ACPI_WMI 548 depends on X86 549 imply THERMAL 550 help 551 This hwmon driver adds support for reporting temperature of different 552 sensors and controls the fans on Dell laptops via System Management 553 Mode provided by Dell BIOS. 554 555 When option I8K is also enabled this driver provides legacy /proc/i8k 556 userspace interface for i8kutils package. 557 558config I8K 559 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 560 depends on SENSORS_DELL_SMM 561 depends on PROC_FS 562 help 563 This option enables the legacy /proc/i8k userspace interface of the 564 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 565 version, temperatures and allows control of fan speeds of some Dell 566 laptops. Sometimes it also reports power and hotkey status. 567 568 This interface is required to run programs from the i8kutils package. 569 570 Say Y if you intend to run userspace programs that use this interface. 571 Say N otherwise. 572 573config SENSORS_DA9052_ADC 574 tristate "Dialog DA9052/DA9053 ADC" 575 depends on PMIC_DA9052 576 help 577 Say y here to support the ADC found on Dialog Semiconductor 578 DA9052-BC and DA9053-AA/Bx PMICs. 579 580 This driver can also be built as module. If so, the module 581 will be called da9052-hwmon. 582 583config SENSORS_DA9055 584 tristate "Dialog Semiconductor DA9055 ADC" 585 depends on MFD_DA9055 586 help 587 If you say yes here you get support for ADC on the Dialog 588 Semiconductor DA9055 PMIC. 589 590 This driver can also be built as a module. If so, the module 591 will be called da9055-hwmon. 592 593config SENSORS_I5K_AMB 594 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 595 depends on PCI 596 help 597 If you say yes here you get support for FB-DIMM AMB temperature 598 monitoring chips on systems with the Intel 5000 series chipset. 599 600 This driver can also be built as a module. If so, the module 601 will be called i5k_amb. 602 603config SENSORS_SPARX5 604 tristate "Sparx5 SoC temperature sensor" 605 depends on ARCH_SPARX5 || COMPILE_TEST 606 help 607 If you say yes here you get support for temperature monitoring 608 with the Microchip Sparx5 SoC. 609 610 This driver can also be built as a module. If so, the module 611 will be called sparx5-temp. 612 613config SENSORS_F71805F 614 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 615 depends on HAS_IOPORT 616 depends on !PPC 617 help 618 If you say yes here you get support for hardware monitoring 619 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 620 Super-I/O chips. 621 622 This driver can also be built as a module. If so, the module 623 will be called f71805f. 624 625config SENSORS_F71882FG 626 tristate "Fintek F71882FG and compatibles" 627 depends on HAS_IOPORT 628 depends on !PPC 629 help 630 If you say yes here you get support for hardware monitoring 631 features of many Fintek Super-I/O (LPC) chips. The currently 632 supported chips are: 633 F71808E/A 634 F71858FG 635 F71862FG 636 F71863FG 637 F71869F/E/A 638 F71882FG 639 F71883FG 640 F71889FG/ED/A 641 F8000 642 F81801U 643 F81865F 644 645 This driver can also be built as a module. If so, the module 646 will be called f71882fg. 647 648config SENSORS_F75375S 649 tristate "Fintek F75375S/SP, F75373 and F75387" 650 depends on I2C 651 help 652 If you say yes here you get support for hardware monitoring 653 features of the Fintek F75375S/SP, F75373 and F75387 654 655 This driver can also be built as a module. If so, the module 656 will be called f75375s. 657 658config SENSORS_GSC 659 tristate "Gateworks System Controller ADC" 660 depends on MFD_GATEWORKS_GSC 661 help 662 Support for the Gateworks System Controller A/D converters. 663 664 To compile this driver as a module, choose M here: 665 the module will be called gsc-hwmon. 666 667config SENSORS_MC13783_ADC 668 tristate "Freescale MC13783/MC13892 ADC" 669 depends on MFD_MC13XXX 670 help 671 Support for the A/D converter on MC13783 and MC13892 PMIC. 672 673config SENSORS_FSCHMD 674 tristate "Fujitsu Siemens Computers sensor chips" 675 depends on (X86 || COMPILE_TEST) && I2C 676 help 677 If you say yes here you get support for the following Fujitsu 678 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 679 Heimdall, Heracles, Hades and Syleus including support for the 680 integrated watchdog. 681 682 This is a merged driver for FSC sensor chips replacing the fscpos, 683 fscscy and fscher drivers and adding support for several other FSC 684 sensor chips. 685 686 This driver can also be built as a module. If so, the module 687 will be called fschmd. 688 689config SENSORS_FTSTEUTATES 690 tristate "Fujitsu Technology Solutions sensor chip Teutates" 691 depends on I2C && WATCHDOG 692 select WATCHDOG_CORE 693 help 694 If you say yes here you get support for the Fujitsu Technology 695 Solutions (FTS) sensor chip "Teutates" including support for 696 the integrated watchdog. 697 698 This driver can also be built as a module. If so, the module 699 will be called ftsteutates. 700 701config SENSORS_GIGABYTE_WATERFORCE 702 tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" 703 depends on USB_HID 704 help 705 If you say yes here you get support for hardware monitoring for the 706 Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. 707 708 This driver can also be built as a module. If so, the module 709 will be called gigabyte_waterforce. 710 711config SENSORS_GL518SM 712 tristate "Genesys Logic GL518SM" 713 depends on I2C 714 help 715 If you say yes here you get support for Genesys Logic GL518SM 716 sensor chips. 717 718 This driver can also be built as a module. If so, the module 719 will be called gl518sm. 720 721config SENSORS_GL520SM 722 tristate "Genesys Logic GL520SM" 723 depends on I2C 724 select HWMON_VID 725 help 726 If you say yes here you get support for Genesys Logic GL520SM 727 sensor chips. 728 729 This driver can also be built as a module. If so, the module 730 will be called gl520sm. 731 732config SENSORS_G760A 733 tristate "GMT G760A" 734 depends on I2C 735 help 736 If you say yes here you get support for Global Mixed-mode 737 Technology Inc G760A fan speed PWM controller chips. 738 739 This driver can also be built as a module. If so, the module 740 will be called g760a. 741 742config SENSORS_G762 743 tristate "GMT G762 and G763" 744 depends on I2C 745 help 746 If you say yes here you get support for Global Mixed-mode 747 Technology Inc G762 and G763 fan speed PWM controller chips. 748 749 This driver can also be built as a module. If so, the module 750 will be called g762. 751 752config SENSORS_GPIO_FAN 753 tristate "GPIO fan" 754 depends on OF_GPIO 755 depends on GPIOLIB || COMPILE_TEST 756 depends on THERMAL || THERMAL=n 757 help 758 If you say yes here you get support for fans connected to GPIO lines. 759 760 This driver can also be built as a module. If so, the module 761 will be called gpio-fan. 762 763config SENSORS_GXP_FAN_CTRL 764 tristate "HPE GXP fan controller" 765 depends on ARCH_HPE_GXP || COMPILE_TEST 766 help 767 If you say yes here you get support for GXP fan control functionality. 768 769 The GXP controls fan function via the CPLD through the use of PWM 770 registers. This driver reports status and pwm setting of the fans. 771 772config SENSORS_HIH6130 773 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 774 depends on I2C 775 help 776 If you say yes here you get support for Honeywell Humidicon 777 HIH-6130 and HIH-6131 Humidicon humidity sensors. 778 779 This driver can also be built as a module. If so, the module 780 will be called hih6130. 781 782config SENSORS_HS3001 783 tristate "Renesas HS3001 humidity and temperature sensors" 784 depends on I2C 785 help 786 If you say yes here you get support for the Renesas HS3001, 787 to HS3004 humidity and temperature sensors. 788 789 This driver can also be built as a module. If so, the module 790 will be called hs3001. 791 792config SENSORS_IBMAEM 793 tristate "IBM Active Energy Manager temperature/power sensors and control" 794 select IPMI_SI 795 depends on IPMI_HANDLER 796 help 797 If you say yes here you get support for the temperature and 798 power sensors and capping hardware in various IBM System X 799 servers that support Active Energy Manager. This includes 800 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 801 and certain HC10/HS2x/LS2x/QS2x blades. 802 803 This driver can also be built as a module. If so, the module 804 will be called ibmaem. 805 806config SENSORS_IBMPEX 807 tristate "IBM PowerExecutive temperature/power sensors" 808 select IPMI_SI 809 depends on IPMI_HANDLER 810 help 811 If you say yes here you get support for the temperature and 812 power sensors in various IBM System X servers that support 813 PowerExecutive. So far this includes the x3350, x3550, x3650, 814 x3655, and x3755; the x3800, x3850, and x3950 models that have 815 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 816 817 This driver can also be built as a module. If so, the module 818 will be called ibmpex. 819 820config SENSORS_IBMPOWERNV 821 tristate "IBM POWERNV platform sensors" 822 depends on PPC_POWERNV 823 default y 824 help 825 If you say yes here you get support for the temperature/fan/power 826 sensors on your PowerNV platform. 827 828 This driver can also be built as a module. If so, the module 829 will be called ibmpowernv. 830 831config SENSORS_IIO_HWMON 832 tristate "Hwmon driver that uses channels specified via iio maps" 833 depends on IIO 834 help 835 This is a platform driver that in combination with a suitable 836 map allows IIO devices to provide basic hwmon functionality 837 for those channels specified in the map. This map can be provided 838 either via platform data or the device tree bindings. 839 840config SENSORS_I5500 841 tristate "Intel 5500/5520/X58 temperature sensor" 842 depends on X86 && PCI 843 help 844 If you say yes here you get support for the temperature 845 sensor inside the Intel 5500, 5520 and X58 chipsets. 846 847 This driver can also be built as a module. If so, the module 848 will be called i5500_temp. 849 850config SENSORS_CORETEMP 851 tristate "Intel Core/Core2/Atom temperature sensor" 852 depends on X86 853 help 854 If you say yes here you get support for the temperature 855 sensor inside your CPU. Most of the family 6 CPUs 856 are supported. Check Documentation/hwmon/coretemp.rst for details. 857 858config SENSORS_ISL28022 859 tristate "Renesas ISL28022" 860 depends on I2C 861 select REGMAP_I2C 862 help 863 If you say yes here you get support for ISL28022 power monitor. 864 Check Documentation/hwmon/isl28022.rst for details. 865 866 This driver can also be built as a module. If so, the module 867 will be called isl28022. 868 869config SENSORS_IT87 870 tristate "ITE IT87xx and compatibles" 871 depends on HAS_IOPORT 872 depends on !PPC 873 select HWMON_VID 874 help 875 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 876 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 877 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 878 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 879 clone. 880 881 This driver can also be built as a module. If so, the module 882 will be called it87. 883 884config SENSORS_JC42 885 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 886 depends on I2C 887 select REGMAP_I2C 888 help 889 If you say yes here, you get support for JEDEC JC42.4 compliant 890 temperature sensors, which are used on many DDR3 memory modules for 891 mobile devices and servers. Support will include, but not be limited 892 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 893 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 894 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 895 896 This driver can also be built as a module. If so, the module 897 will be called jc42. 898 899config SENSORS_POWERZ 900 tristate "ChargerLAB POWER-Z USB-C tester" 901 depends on USB 902 help 903 If you say yes here you get support for ChargerLAB POWER-Z series of 904 USB-C charging testers. 905 906 This driver can also be built as a module. If so, the module 907 will be called powerz. 908 909config SENSORS_POWR1220 910 tristate "Lattice POWR1220 Power Monitoring" 911 depends on I2C 912 help 913 If you say yes here you get access to the hardware monitoring 914 functions of the Lattice POWR1220 isp Power Supply Monitoring, 915 Sequencing and Margining Controller. 916 917 This driver can also be built as a module. If so, the module 918 will be called powr1220. 919 920config SENSORS_LAN966X 921 tristate "Microchip LAN966x Hardware Monitoring" 922 depends on SOC_LAN966 || COMPILE_TEST 923 select REGMAP 924 select POLYNOMIAL 925 help 926 If you say yes here you get support for temperature monitoring 927 on the Microchip LAN966x SoC. 928 929 This driver can also be built as a module. If so, the module 930 will be called lan966x-hwmon. 931 932config SENSORS_LENOVO_EC 933 tristate "Sensor reader for Lenovo ThinkStations" 934 depends on X86 935 help 936 If you say yes here you get support for LENOVO 937 EC Sensor data on newer ThinkStation systems 938 939 This driver can also be built as a module. If so, the module 940 will be called lenovo_ec_sensors. 941 942config SENSORS_LINEAGE 943 tristate "Lineage Compact Power Line Power Entry Module" 944 depends on I2C 945 help 946 If you say yes here you get support for the Lineage Compact Power Line 947 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 948 CP2000DC, CP2725, and others. 949 950 This driver can also be built as a module. If so, the module 951 will be called lineage-pem. 952 953config SENSORS_LOCHNAGAR 954 tristate "Lochnagar Hardware Monitor" 955 depends on MFD_LOCHNAGAR 956 help 957 If you say yes here you get support for Lochnagar 2 temperature, 958 voltage and current sensors abilities. 959 960 This driver can also be built as a module. If so, the module 961 will be called lochnagar-hwmon. 962 963config SENSORS_LTC2945 964 tristate "Linear Technology LTC2945" 965 depends on I2C 966 select REGMAP_I2C 967 help 968 If you say yes here you get support for Linear Technology LTC2945 969 I2C System Monitor. 970 971 This driver can also be built as a module. If so, the module will 972 be called ltc2945. 973 974config SENSORS_LTC2947 975 tristate 976 977config SENSORS_LTC2947_I2C 978 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 979 depends on I2C 980 select REGMAP_I2C 981 select SENSORS_LTC2947 982 help 983 If you say yes here you get support for Linear Technology LTC2947 984 I2C High Precision Power and Energy Monitor 985 986 This driver can also be built as a module. If so, the module will 987 be called ltc2947-i2c. 988 989config SENSORS_LTC2947_SPI 990 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 991 depends on SPI_MASTER 992 select REGMAP_SPI 993 select SENSORS_LTC2947 994 help 995 If you say yes here you get support for Linear Technology LTC2947 996 SPI High Precision Power and Energy Monitor 997 998 This driver can also be built as a module. If so, the module will 999 be called ltc2947-spi. 1000 1001config SENSORS_LTC2990 1002 tristate "Linear Technology LTC2990" 1003 depends on I2C 1004 help 1005 If you say yes here you get support for Linear Technology LTC2990 1006 I2C System Monitor. The LTC2990 supports a combination of voltage, 1007 current and temperature monitoring. 1008 1009 This driver can also be built as a module. If so, the module will 1010 be called ltc2990. 1011 1012config SENSORS_LTC2991 1013 tristate "Analog Devices LTC2991" 1014 depends on I2C 1015 select REGMAP_I2C 1016 help 1017 If you say yes here you get support for Analog Devices LTC2991 1018 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 1019 supports a combination of voltage, current and temperature monitoring. 1020 1021 This driver can also be built as a module. If so, the module will 1022 be called ltc2991. 1023 1024config SENSORS_LTC2992 1025 tristate "Linear Technology LTC2992" 1026 depends on I2C 1027 depends on GPIOLIB 1028 help 1029 If you say yes here you get support for Linear Technology LTC2992 1030 I2C System Monitor. The LTC2992 measures current, voltage, and 1031 power of two supplies. 1032 1033 This driver can also be built as a module. If so, the module will 1034 be called ltc2992. 1035 1036config SENSORS_LTC4151 1037 tristate "Linear Technology LTC4151" 1038 depends on I2C 1039 help 1040 If you say yes here you get support for Linear Technology LTC4151 1041 High Voltage I2C Current and Voltage Monitor interface. 1042 1043 This driver can also be built as a module. If so, the module will 1044 be called ltc4151. 1045 1046config SENSORS_LTC4215 1047 tristate "Linear Technology LTC4215" 1048 depends on I2C 1049 help 1050 If you say yes here you get support for Linear Technology LTC4215 1051 Hot Swap Controller I2C interface. 1052 1053 This driver can also be built as a module. If so, the module will 1054 be called ltc4215. 1055 1056config SENSORS_LTC4222 1057 tristate "Linear Technology LTC4222" 1058 depends on I2C 1059 select REGMAP_I2C 1060 help 1061 If you say yes here you get support for Linear Technology LTC4222 1062 Dual Hot Swap Controller I2C interface. 1063 1064 This driver can also be built as a module. If so, the module will 1065 be called ltc4222. 1066 1067config SENSORS_LTC4245 1068 tristate "Linear Technology LTC4245" 1069 depends on I2C 1070 help 1071 If you say yes here you get support for Linear Technology LTC4245 1072 Multiple Supply Hot Swap Controller I2C interface. 1073 1074 This driver can also be built as a module. If so, the module will 1075 be called ltc4245. 1076 1077config SENSORS_LTC4260 1078 tristate "Linear Technology LTC4260" 1079 depends on I2C 1080 select REGMAP_I2C 1081 help 1082 If you say yes here you get support for Linear Technology LTC4260 1083 Positive Voltage Hot Swap Controller I2C interface. 1084 1085 This driver can also be built as a module. If so, the module will 1086 be called ltc4260. 1087 1088config SENSORS_LTC4261 1089 tristate "Linear Technology LTC4261" 1090 depends on I2C 1091 help 1092 If you say yes here you get support for Linear Technology LTC4261 1093 Negative Voltage Hot Swap Controller I2C interface. 1094 1095 This driver can also be built as a module. If so, the module will 1096 be called ltc4261. 1097 1098config SENSORS_LTC4282 1099 tristate "Analog Devices LTC4282" 1100 depends on I2C 1101 select REGMAP_I2C 1102 help 1103 If you say yes here you get support for Analog Devices LTC4282 1104 High Current Hot Swap Controller I2C interface. 1105 1106 This driver can also be built as a module. If so, the module will 1107 be called ltc4282. 1108 1109config SENSORS_LTQ_CPUTEMP 1110 bool "Lantiq cpu temperature sensor driver" 1111 depends on SOC_XWAY 1112 help 1113 If you say yes here you get support for the temperature 1114 sensor inside your CPU. 1115 1116config SENSORS_MAX1111 1117 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1118 depends on SPI_MASTER 1119 help 1120 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1121 ADC chips. 1122 1123 This driver can also be built as a module. If so, the module 1124 will be called max1111. 1125 1126config SENSORS_MAX127 1127 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1128 depends on I2C 1129 help 1130 Say y here to support Maxim's MAX127 DAS chips. 1131 1132 This driver can also be built as a module. If so, the module 1133 will be called max127. 1134 1135config SENSORS_MAX16065 1136 tristate "Maxim MAX16065 System Manager and compatibles" 1137 depends on I2C 1138 help 1139 If you say yes here you get support for hardware monitoring 1140 capabilities of the following Maxim System Manager chips. 1141 MAX16065 1142 MAX16066 1143 MAX16067 1144 MAX16068 1145 MAX16070 1146 MAX16071 1147 1148 This driver can also be built as a module. If so, the module 1149 will be called max16065. 1150 1151config SENSORS_MAX1619 1152 tristate "Maxim MAX1619 sensor chip" 1153 depends on I2C 1154 help 1155 If you say yes here you get support for MAX1619 sensor chip. 1156 1157 This driver can also be built as a module. If so, the module 1158 will be called max1619. 1159 1160config SENSORS_MAX1668 1161 tristate "Maxim MAX1668 and compatibles" 1162 depends on I2C 1163 select REGMAP_I2C 1164 help 1165 If you say yes here you get support for MAX1668, MAX1989 and 1166 MAX1805 chips. 1167 1168 This driver can also be built as a module. If so, the module 1169 will be called max1668. 1170 1171config SENSORS_MAX197 1172 tristate "Maxim MAX197 and compatibles" 1173 help 1174 Support for the Maxim MAX197 A/D converter. 1175 Support will include, but not be limited to, MAX197, and MAX199. 1176 1177 This driver can also be built as a module. If so, the module 1178 will be called max197. 1179 1180config SENSORS_MAX31722 1181 tristate "MAX31722 temperature sensor" 1182 depends on SPI 1183 help 1184 Support for the Maxim Integrated MAX31722/MAX31723 digital 1185 thermometers/thermostats operating over an SPI interface. 1186 1187 This driver can also be built as a module. If so, the module 1188 will be called max31722. 1189 1190config SENSORS_MAX31730 1191 tristate "MAX31730 temperature sensor" 1192 depends on I2C 1193 help 1194 Support for the Maxim Integrated MAX31730 3-Channel Remote 1195 Temperature Sensor. 1196 1197 This driver can also be built as a module. If so, the module 1198 will be called max31730. 1199 1200config SENSORS_MAX31760 1201 tristate "MAX31760 fan speed controller" 1202 depends on I2C 1203 select REGMAP_I2C 1204 help 1205 Support for the Analog Devices MAX31760 Precision Fan-Speed 1206 Controller. MAX31760 integrates temperature sensing along with 1207 precision PWM fan control. 1208 1209 This driver can also be built as a module. If so, the module 1210 will be called max31760. 1211 1212config MAX31827 1213 tristate "MAX31827 low-power temperature switch and similar devices" 1214 depends on I2C 1215 select REGMAP_I2C 1216 help 1217 If you say yes here you get support for MAX31827, MAX31828 and 1218 MAX31829 low-power temperature switches and sensors connected with I2C. 1219 1220 This driver can also be built as a module. If so, the module 1221 will be called max31827. 1222 1223config SENSORS_MAX6620 1224 tristate "Maxim MAX6620 fan controller" 1225 depends on I2C 1226 help 1227 If you say yes here you get support for the MAX6620 1228 fan controller. 1229 1230 This driver can also be built as a module. If so, the module 1231 will be called max6620. 1232 1233config SENSORS_MAX6621 1234 tristate "Maxim MAX6621 sensor chip" 1235 depends on I2C 1236 select REGMAP_I2C 1237 help 1238 If you say yes here you get support for MAX6621 sensor chip. 1239 MAX6621 is a PECI-to-I2C translator provides an efficient, 1240 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1241 It allows reading the temperature from the PECI-compliant 1242 host directly from up to four PECI-enabled CPUs. 1243 1244 This driver can also be built as a module. If so, the module 1245 will be called max6621. 1246 1247config SENSORS_MAX6639 1248 tristate "Maxim MAX6639 sensor chip" 1249 depends on I2C 1250 select REGMAP_I2C 1251 help 1252 If you say yes here you get support for the MAX6639 1253 sensor chips. 1254 1255 This driver can also be built as a module. If so, the module 1256 will be called max6639. 1257 1258config SENSORS_MAX6650 1259 tristate "Maxim MAX6650 sensor chip" 1260 depends on I2C 1261 depends on THERMAL || THERMAL=n 1262 help 1263 If you say yes here you get support for the MAX6650 / MAX6651 1264 sensor chips. 1265 1266 This driver can also be built as a module. If so, the module 1267 will be called max6650. 1268 1269config SENSORS_MAX6697 1270 tristate "Maxim MAX6697 and compatibles" 1271 depends on I2C 1272 help 1273 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1274 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1275 temperature sensor chips. 1276 1277 This driver can also be built as a module. If so, the module 1278 will be called max6697. 1279 1280config SENSORS_MAX31790 1281 tristate "Maxim MAX31790 sensor chip" 1282 depends on I2C 1283 help 1284 If you say yes here you get support for 6-Channel PWM-Output 1285 Fan RPM Controller. 1286 1287 This driver can also be built as a module. If so, the module 1288 will be called max31790. 1289 1290config SENSORS_MC34VR500 1291 tristate "NXP MC34VR500 hardware monitoring driver" 1292 depends on I2C 1293 select REGMAP_I2C 1294 help 1295 If you say yes here you get support for the temperature and input 1296 voltage sensors of the NXP MC34VR500. 1297 1298config SENSORS_MCP3021 1299 tristate "Microchip MCP3021 and compatibles" 1300 depends on I2C 1301 help 1302 If you say yes here you get support for MCP3021 and MCP3221. 1303 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1304 with 12-bit resolution. 1305 1306 This driver can also be built as a module. If so, the module 1307 will be called mcp3021. 1308 1309config SENSORS_MLXREG_FAN 1310 tristate "Mellanox FAN driver" 1311 depends on MELLANOX_PLATFORM 1312 imply THERMAL 1313 select REGMAP 1314 help 1315 This option enables support for the FAN control on the Mellanox 1316 Ethernet and InfiniBand switches. The driver can be activated by the 1317 platform device add call. Say Y to enable these. To compile this 1318 driver as a module, choose 'M' here: the module will be called 1319 mlxreg-fan. 1320 1321config SENSORS_TC654 1322 tristate "Microchip TC654/TC655 and compatibles" 1323 depends on I2C 1324 help 1325 If you say yes here you get support for TC654 and TC655. 1326 The TC654 and TC655 are PWM mode fan speed controllers with 1327 FanSense technology for use with brushless DC fans. 1328 1329 This driver can also be built as a module. If so, the module 1330 will be called tc654. 1331 1332config SENSORS_TPS23861 1333 tristate "Texas Instruments TPS23861 PoE PSE" 1334 depends on I2C 1335 select REGMAP_I2C 1336 help 1337 If you say yes here you get support for Texas Instruments 1338 TPS23861 802.3at PoE PSE chips. 1339 1340 This driver can also be built as a module. If so, the module 1341 will be called tps23861. 1342 1343config SENSORS_MENF21BMC_HWMON 1344 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1345 depends on MFD_MENF21BMC 1346 help 1347 Say Y here to include support for the MEN 14F021P00 BMC 1348 hardware monitoring. 1349 1350 This driver can also be built as a module. If so the module 1351 will be called menf21bmc_hwmon. 1352 1353config SENSORS_MR75203 1354 tristate "Moortec Semiconductor MR75203 PVT Controller" 1355 select REGMAP_MMIO 1356 help 1357 If you say yes here you get support for Moortec MR75203 1358 PVT controller. 1359 1360 This driver can also be built as a module. If so, the module 1361 will be called mr75203. 1362 1363config SENSORS_ADCXX 1364 tristate "National Semiconductor ADCxxxSxxx" 1365 depends on SPI_MASTER 1366 help 1367 If you say yes here you get support for the National Semiconductor 1368 ADC<bb><c>S<sss> chip family, where 1369 * bb is the resolution in number of bits (8, 10, 12) 1370 * c is the number of channels (1, 2, 4, 8) 1371 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1372 kSPS and 101 for 1 MSPS) 1373 1374 Examples : ADC081S101, ADC124S501, ... 1375 1376 This driver can also be built as a module. If so, the module 1377 will be called adcxx. 1378 1379config SENSORS_LM63 1380 tristate "National Semiconductor LM63 and compatibles" 1381 depends on I2C 1382 help 1383 If you say yes here you get support for the National 1384 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1385 sensors with integrated fan control. Such chips are found 1386 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1387 others. 1388 1389 This driver can also be built as a module. If so, the module 1390 will be called lm63. 1391 1392config SENSORS_LM70 1393 tristate "National Semiconductor LM70 and compatibles" 1394 depends on SPI_MASTER 1395 help 1396 If you say yes here you get support for the National Semiconductor 1397 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1398 TMP125 digital temperature sensor chips. 1399 1400 This driver can also be built as a module. If so, the module 1401 will be called lm70. 1402 1403config SENSORS_LM73 1404 tristate "National Semiconductor LM73" 1405 depends on I2C 1406 help 1407 If you say yes here you get support for National Semiconductor LM73 1408 sensor chips. 1409 This driver can also be built as a module. If so, the module 1410 will be called lm73. 1411 1412config SENSORS_LM75 1413 tristate "National Semiconductor LM75 and compatibles" 1414 depends on I2C 1415 depends on I3C || !I3C 1416 select REGMAP_I2C 1417 select REGMAP_I3C if I3C 1418 help 1419 If you say yes here you get support for one common type of 1420 temperature sensor chip, with models including: 1421 1422 - Analog Devices ADT75 1423 - Atmel (now Microchip) AT30TS74 1424 - Dallas Semiconductor DS75, DS1775 and DS7505 1425 - Global Mixed-mode Technology (GMT) G751 1426 - Maxim MAX6625 and MAX6626 1427 - Microchip MCP980x 1428 - National Semiconductor LM75, LM75A 1429 - NXP's LM75A 1430 - ST Microelectronics STDS75 1431 - ST Microelectronics STLM75 1432 - TelCom (now Microchip) TCN75 1433 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1434 TMP175, TMP275 1435 1436 This driver supports driver model based binding through board 1437 specific I2C device tables. 1438 1439 It also supports the "legacy" style of driver binding. To use 1440 that with some chips which don't replicate LM75 quirks exactly, 1441 you may need the "force" module parameter. 1442 1443 This driver can also be built as a module. If so, the module 1444 will be called lm75. 1445 1446config SENSORS_LM77 1447 tristate "National Semiconductor LM77" 1448 depends on I2C 1449 help 1450 If you say yes here you get support for National Semiconductor LM77 1451 sensor chips. 1452 1453 This driver can also be built as a module. If so, the module 1454 will be called lm77. 1455 1456config SENSORS_LM78 1457 tristate "National Semiconductor LM78 and compatibles" 1458 depends on I2C 1459 select HWMON_VID 1460 help 1461 If you say yes here you get support for National Semiconductor LM78, 1462 LM78-J and LM79. 1463 1464 This driver can also be built as a module. If so, the module 1465 will be called lm78. 1466 1467config SENSORS_LM80 1468 tristate "National Semiconductor LM80 and LM96080" 1469 depends on I2C 1470 help 1471 If you say yes here you get support for National Semiconductor 1472 LM80 and LM96080 sensor chips. 1473 1474 This driver can also be built as a module. If so, the module 1475 will be called lm80. 1476 1477config SENSORS_LM83 1478 tristate "National Semiconductor LM83 and compatibles" 1479 depends on I2C 1480 select REGMAP 1481 help 1482 If you say yes here you get support for National Semiconductor 1483 LM82 and LM83 sensor chips. 1484 1485 This driver can also be built as a module. If so, the module 1486 will be called lm83. 1487 1488config SENSORS_LM85 1489 tristate "National Semiconductor LM85 and compatibles" 1490 depends on I2C 1491 select HWMON_VID 1492 help 1493 If you say yes here you get support for National Semiconductor LM85 1494 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1495 EMC6D101, EMC6D102, and EMC6D103. 1496 1497 This driver can also be built as a module. If so, the module 1498 will be called lm85. 1499 1500config SENSORS_LM87 1501 tristate "National Semiconductor LM87 and compatibles" 1502 depends on I2C 1503 select HWMON_VID 1504 help 1505 If you say yes here you get support for National Semiconductor LM87 1506 and Analog Devices ADM1024 sensor chips. 1507 1508 This driver can also be built as a module. If so, the module 1509 will be called lm87. 1510 1511config SENSORS_LM90 1512 tristate "National Semiconductor LM90 and compatibles" 1513 depends on I2C 1514 help 1515 If you say yes here you get support for National Semiconductor LM84, 1516 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1517 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1518 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1519 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1520 MAX6696, 1521 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1522 Winbond/Nuvoton W83L771W/G/AWG/ASG, 1523 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1524 sensor chips. 1525 1526 This driver can also be built as a module. If so, the module 1527 will be called lm90. 1528 1529config SENSORS_LM92 1530 tristate "National Semiconductor LM92 and compatibles" 1531 depends on I2C 1532 select REGMAP_I2C 1533 help 1534 If you say yes here you get support for National Semiconductor LM92 1535 and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. 1536 1537 This driver can also be built as a module. If so, the module 1538 will be called lm92. 1539 1540config SENSORS_LM93 1541 tristate "National Semiconductor LM93 and compatibles" 1542 depends on I2C 1543 select HWMON_VID 1544 help 1545 If you say yes here you get support for National Semiconductor LM93, 1546 LM94, and compatible sensor chips. 1547 1548 This driver can also be built as a module. If so, the module 1549 will be called lm93. 1550 1551config SENSORS_LM95234 1552 tristate "National Semiconductor LM95234 and compatibles" 1553 depends on I2C 1554 select REGMAP_I2C 1555 help 1556 If you say yes here you get support for the LM95233 and LM95234 1557 temperature sensor chips. 1558 1559 This driver can also be built as a module. If so, the module 1560 will be called lm95234. 1561 1562config SENSORS_LM95241 1563 tristate "National Semiconductor LM95241 and compatibles" 1564 depends on I2C 1565 help 1566 If you say yes here you get support for LM95231 and LM95241 sensor 1567 chips. 1568 1569 This driver can also be built as a module. If so, the module 1570 will be called lm95241. 1571 1572config SENSORS_LM95245 1573 tristate "National Semiconductor LM95245 and compatibles" 1574 depends on I2C 1575 select REGMAP_I2C 1576 help 1577 If you say yes here you get support for LM95235 and LM95245 1578 temperature sensor chips. 1579 1580 This driver can also be built as a module. If so, the module 1581 will be called lm95245. 1582 1583config SENSORS_PC87360 1584 tristate "National Semiconductor PC87360 family" 1585 depends on HAS_IOPORT 1586 depends on !PPC 1587 select HWMON_VID 1588 help 1589 If you say yes here you get access to the hardware monitoring 1590 functions of the National Semiconductor PC8736x Super-I/O chips. 1591 The PC87360, PC87363 and PC87364 only have fan monitoring and 1592 control. The PC87365 and PC87366 additionally have voltage and 1593 temperature monitoring. 1594 1595 This driver can also be built as a module. If so, the module 1596 will be called pc87360. 1597 1598config SENSORS_PC87427 1599 tristate "National Semiconductor PC87427" 1600 depends on HAS_IOPORT 1601 depends on !PPC 1602 help 1603 If you say yes here you get access to the hardware monitoring 1604 functions of the National Semiconductor PC87427 Super-I/O chip. 1605 The chip has two distinct logical devices, one for fan speed 1606 monitoring and control, and one for voltage and temperature 1607 monitoring. Fan speed monitoring and control are supported, as 1608 well as temperature monitoring. Voltages aren't supported yet. 1609 1610 This driver can also be built as a module. If so, the module 1611 will be called pc87427. 1612 1613config SENSORS_NTC_THERMISTOR 1614 tristate "NTC thermistor support" 1615 depends on IIO 1616 depends on THERMAL || !THERMAL_OF 1617 help 1618 This driver supports NTC thermistors sensor reading and its 1619 interpretation. The driver can also monitor the temperature and 1620 send notifications about the temperature. 1621 1622 Currently, this driver supports 1623 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1624 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1625 B57891S0103 from EPCOS. 1626 1627 This driver can also be built as a module. If so, the module 1628 will be called ntc-thermistor. 1629 1630config SENSORS_NCT6683 1631 tristate "Nuvoton NCT6683D" 1632 depends on HAS_IOPORT 1633 depends on !PPC 1634 help 1635 If you say yes here you get support for the hardware monitoring 1636 functionality of the Nuvoton NCT6683D eSIO chip. 1637 1638 This driver can also be built as a module. If so, the module 1639 will be called nct6683. 1640 1641config SENSORS_NCT6775_CORE 1642 tristate 1643 select REGMAP 1644 help 1645 This module contains common code shared by the platform and 1646 i2c versions of the nct6775 driver; it is not useful on its 1647 own. 1648 1649 If built as a module, the module will be called 1650 nct6775-core. 1651 1652config SENSORS_NCT6775 1653 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1654 depends on HAS_IOPORT 1655 depends on !PPC 1656 depends on ACPI || ACPI=n 1657 select HWMON_VID 1658 select SENSORS_NCT6775_CORE 1659 help 1660 If you say yes here you get support for the hardware monitoring 1661 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1662 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1663 Super-I/O chips. This driver replaces the w83627ehf driver for 1664 NCT6775F and NCT6776F. 1665 1666 This driver can also be built as a module. If so, the module 1667 will be called nct6775. 1668 1669config SENSORS_NCT6775_I2C 1670 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1671 depends on I2C 1672 select REGMAP_I2C 1673 select SENSORS_NCT6775_CORE 1674 help 1675 If you say yes here you get support for the hardware monitoring 1676 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1677 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1678 Super-I/O chips via their I2C interface. 1679 1680 If you're not building a kernel for a BMC, this is probably 1681 not the driver you want (see CONFIG_SENSORS_NCT6775). 1682 1683 This driver can also be built as a module. If so, the module 1684 will be called nct6775-i2c. 1685 1686config SENSORS_NCT7363 1687 tristate "Nuvoton NCT7363Y" 1688 depends on I2C 1689 select REGMAP_I2C 1690 help 1691 If you say yes here you get support for the Nuvoton NCT7363Y 1692 hardware monitoring chip. 1693 1694 This driver can also be built as a module. If so, the module 1695 will be called nct7363. 1696 1697config SENSORS_NCT7802 1698 tristate "Nuvoton NCT7802Y" 1699 depends on I2C 1700 select REGMAP_I2C 1701 help 1702 If you say yes here you get support for the Nuvoton NCT7802Y 1703 hardware monitoring chip. 1704 1705 This driver can also be built as a module. If so, the module 1706 will be called nct7802. 1707 1708config SENSORS_NCT7904 1709 tristate "Nuvoton NCT7904" 1710 depends on I2C && WATCHDOG 1711 select WATCHDOG_CORE 1712 help 1713 If you say yes here you get support for the Nuvoton NCT7904 1714 hardware monitoring chip, including manual fan speed control 1715 and support for the integrated watchdog. 1716 1717 This driver can also be built as a module. If so, the module 1718 will be called nct7904. 1719 1720config SENSORS_NPCM7XX 1721 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1722 imply THERMAL 1723 help 1724 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1725 and Fan controllers. 1726 1727 This driver can also be built as a module. If so, the module 1728 will be called npcm750-pwm-fan. 1729 1730config SENSORS_NSA320 1731 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1732 depends on GPIOLIB && OF 1733 depends on MACH_KIRKWOOD || COMPILE_TEST 1734 help 1735 If you say yes here you get support for hardware monitoring 1736 for the ZyXEL NSA320 Media Server and other compatible devices 1737 (probably the NSA325 and some NSA310 variants). 1738 1739 The sensor data is taken from a Holtek HT46R065 microcontroller 1740 connected to GPIO lines. 1741 1742 This driver can also be built as a module. If so, the module 1743 will be called nsa320-hwmon. 1744 1745config SENSORS_NZXT_KRAKEN2 1746 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1747 depends on USB_HID 1748 help 1749 If you say yes here you get support for hardware monitoring for the 1750 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1751 1752 This driver can also be built as a module. If so, the module 1753 will be called nzxt-kraken2. 1754 1755config SENSORS_NZXT_KRAKEN3 1756 tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" 1757 depends on USB_HID 1758 help 1759 If you say yes here you get support for hardware monitoring for the 1760 NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. 1761 1762 This driver can also be built as a module. If so, the module 1763 will be called nzxt-kraken3. 1764 1765config SENSORS_NZXT_SMART2 1766 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1767 depends on USB_HID 1768 help 1769 If you say yes here you get support for hardware monitoring for the 1770 NZXT RGB & Fan Controller/Smart Device v2. 1771 1772 This driver can also be built as a module. If so, the module 1773 will be called nzxt-smart2. 1774 1775source "drivers/hwmon/occ/Kconfig" 1776 1777config SENSORS_OXP 1778 tristate "OneXPlayer EC fan control" 1779 depends on ACPI_EC 1780 depends on X86 1781 help 1782 If you say yes here you get support for fan readings and control over 1783 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant 1784 boards are supported. 1785 1786 Can also be built as a module. In that case it will be called oxp-sensors. 1787 1788config SENSORS_PCF8591 1789 tristate "Philips PCF8591 ADC/DAC" 1790 depends on I2C 1791 help 1792 If you say yes here you get support for Philips PCF8591 4-channel 1793 ADC, 1-channel DAC chips. 1794 1795 This driver can also be built as a module. If so, the module 1796 will be called pcf8591. 1797 1798 These devices are hard to detect and rarely found on mainstream 1799 hardware. If unsure, say N. 1800 1801source "drivers/hwmon/peci/Kconfig" 1802 1803source "drivers/hwmon/pmbus/Kconfig" 1804 1805config SENSORS_PT5161L 1806 tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" 1807 depends on I2C 1808 help 1809 If you say yes here you get support for temperature monitoring 1810 on the Astera Labs PT5161L PCIe retimer. 1811 1812 This driver can also be built as a module. If so, the module 1813 will be called pt5161l. 1814 1815config SENSORS_PWM_FAN 1816 tristate "PWM fan" 1817 depends on PWM || COMPILE_TEST 1818 depends on THERMAL || THERMAL=n 1819 help 1820 If you say yes here you get support for fans connected to PWM lines. 1821 The driver uses the generic PWM interface, thus it will work on a 1822 variety of SoCs. 1823 1824 This driver can also be built as a module. If so, the module 1825 will be called pwm-fan. 1826 1827config SENSORS_QNAP_MCU_HWMON 1828 tristate "QNAP MCU hardware monitoring" 1829 depends on MFD_QNAP_MCU 1830 depends on THERMAL || THERMAL=n 1831 help 1832 Say yes here to enable support for fan and temperature sensor 1833 connected to a QNAP MCU, as found in a number of QNAP network 1834 attached storage devices. 1835 1836 This driver can also be built as a module. If so, the module 1837 will be called qnap-mcu-hwmon. 1838 1839config SENSORS_RASPBERRYPI_HWMON 1840 tristate "Raspberry Pi voltage monitor" 1841 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1842 help 1843 If you say yes here you get support for voltage sensor on the 1844 Raspberry Pi. 1845 1846 This driver can also be built as a module. If so, the module 1847 will be called raspberrypi-hwmon. 1848 1849config SENSORS_SL28CPLD 1850 tristate "Kontron sl28cpld hardware monitoring driver" 1851 depends on MFD_SL28CPLD || COMPILE_TEST 1852 help 1853 If you say yes here you get support for the fan supervisor of the 1854 sl28cpld board management controller. 1855 1856 This driver can also be built as a module. If so, the module 1857 will be called sl28cpld-hwmon. 1858 1859config SENSORS_SBTSI 1860 tristate "Emulated SB-TSI temperature sensor" 1861 depends on I2C 1862 help 1863 If you say yes here you get support for emulated temperature 1864 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1865 1866 This driver can also be built as a module. If so, the module will 1867 be called sbtsi_temp. 1868 1869config SENSORS_SBRMI 1870 tristate "Emulated SB-RMI sensor" 1871 depends on I2C 1872 help 1873 If you say yes here you get support for emulated RMI 1874 sensors on AMD SoCs with APML interface connected to a BMC device. 1875 1876 This driver can also be built as a module. If so, the module will 1877 be called sbrmi. 1878 1879config SENSORS_SHT15 1880 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1881 depends on GPIOLIB || COMPILE_TEST 1882 select BITREVERSE 1883 help 1884 If you say yes here you get support for the Sensiron SHT10, SHT11, 1885 SHT15, SHT71, SHT75 humidity and temperature sensors. 1886 1887 This driver can also be built as a module. If so, the module 1888 will be called sht15. 1889 1890config SENSORS_SHT21 1891 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1892 depends on I2C 1893 help 1894 If you say yes here you get support for the Sensiron SHT21, SHT25 1895 humidity and temperature sensors. 1896 1897 This driver can also be built as a module. If so, the module 1898 will be called sht21. 1899 1900config SENSORS_SHT3x 1901 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1902 depends on I2C 1903 select CRC8 1904 help 1905 If you say yes here you get support for the Sensiron SHT30 and SHT31 1906 humidity and temperature sensors. 1907 1908 This driver can also be built as a module. If so, the module 1909 will be called sht3x. 1910 1911config SENSORS_SHT4x 1912 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1913 depends on I2C 1914 select CRC8 1915 help 1916 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1917 SHT45 humidity and temperature sensors. 1918 1919 This driver can also be built as a module. If so, the module 1920 will be called sht4x. 1921 1922config SENSORS_SHTC1 1923 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1924 depends on I2C 1925 help 1926 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1927 and SHTC3 humidity and temperature sensors. 1928 1929 This driver can also be built as a module. If so, the module 1930 will be called shtc1. 1931 1932config SENSORS_SIS5595 1933 tristate "Silicon Integrated Systems Corp. SiS5595" 1934 depends on PCI && HAS_IOPORT 1935 help 1936 If you say yes here you get support for the integrated sensors in 1937 SiS5595 South Bridges. 1938 1939 This driver can also be built as a module. If so, the module 1940 will be called sis5595. 1941 1942config SENSORS_SY7636A 1943 tristate "Silergy SY7636A" 1944 depends on MFD_SY7636A 1945 help 1946 If you say yes here you get support for the thermistor readout of 1947 the Silergy SY7636A PMIC. 1948 1949 This driver can also be built as a module. If so, the module 1950 will be called sy7636a-hwmon. 1951 1952config SENSORS_DME1737 1953 tristate "SMSC DME1737, SCH311x and compatibles" 1954 depends on HAS_IOPORT 1955 depends on I2C && !PPC 1956 select HWMON_VID 1957 help 1958 If you say yes here you get support for the hardware monitoring 1959 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1960 Asus A8000 Super-I/O chips. 1961 1962 This driver can also be built as a module. If so, the module 1963 will be called dme1737. 1964 1965config SENSORS_EMC1403 1966 tristate "SMSC EMC1403/23 thermal sensor" 1967 depends on I2C 1968 select REGMAP_I2C 1969 help 1970 If you say yes here you get support for the SMSC EMC1403/23 1971 temperature monitoring chip. 1972 1973 Threshold values can be configured using sysfs. 1974 Data from the different diodes are accessible via sysfs. 1975 1976config SENSORS_EMC2103 1977 tristate "SMSC EMC2103" 1978 depends on I2C 1979 help 1980 If you say yes here you get support for the temperature 1981 and fan sensors of the SMSC EMC2103 chips. 1982 1983 This driver can also be built as a module. If so, the module 1984 will be called emc2103. 1985 1986config SENSORS_EMC2305 1987 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 1988 depends on I2C 1989 imply THERMAL 1990 help 1991 If you say yes here you get support for the Microchip EMC2305 1992 fan controller chips. 1993 The Microchip EMC2305 is a fan controller for up to 5 fans. 1994 Fan rotation speeds are reported in RPM. 1995 1996 This driver can also be built as a module. If so, the module 1997 will be called emc2305. 1998 1999config SENSORS_EMC6W201 2000 tristate "SMSC EMC6W201" 2001 depends on I2C 2002 help 2003 If you say yes here you get support for the SMSC EMC6W201 2004 hardware monitoring chip. 2005 2006 This driver can also be built as a module. If so, the module 2007 will be called emc6w201. 2008 2009config SENSORS_SMSC47M1 2010 tristate "SMSC LPC47M10x and compatibles" 2011 depends on HAS_IOPORT 2012 depends on !PPC 2013 help 2014 If you say yes here you get support for the integrated fan 2015 monitoring and control capabilities of the SMSC LPC47B27x, 2016 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 2017 LPC47M192, LPC47M292 and LPC47M997 chips. 2018 2019 The temperature and voltage sensor features of the LPC47M15x, 2020 LPC47M192, LPC47M292 and LPC47M997 are supported by another 2021 driver, select also "SMSC LPC47M192 and compatibles" below for 2022 those. 2023 2024 This driver can also be built as a module. If so, the module 2025 will be called smsc47m1. 2026 2027config SENSORS_SMSC47M192 2028 tristate "SMSC LPC47M192 and compatibles" 2029 depends on I2C 2030 select HWMON_VID 2031 help 2032 If you say yes here you get support for the temperature and 2033 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 2034 and LPC47M997 chips. 2035 2036 The fan monitoring and control capabilities of these chips 2037 are supported by another driver, select 2038 "SMSC LPC47M10x and compatibles" above. You need both drivers 2039 if you want fan control and voltage/temperature sensor support. 2040 2041 This driver can also be built as a module. If so, the module 2042 will be called smsc47m192. 2043 2044config SENSORS_SMSC47B397 2045 tristate "SMSC LPC47B397-NC" 2046 depends on HAS_IOPORT 2047 depends on !PPC 2048 help 2049 If you say yes here you get support for the SMSC LPC47B397-NC 2050 sensor chip. 2051 2052 This driver can also be built as a module. If so, the module 2053 will be called smsc47b397. 2054 2055config SENSORS_SCH56XX_COMMON 2056 tristate 2057 select REGMAP 2058 2059config SENSORS_SCH5627 2060 tristate "SMSC SCH5627" 2061 depends on HAS_IOPORT 2062 depends on !PPC && WATCHDOG 2063 select SENSORS_SCH56XX_COMMON 2064 select WATCHDOG_CORE 2065 help 2066 If you say yes here you get support for the hardware monitoring 2067 features of the SMSC SCH5627 Super-I/O chip including support for 2068 the integrated watchdog. 2069 2070 This driver can also be built as a module. If so, the module 2071 will be called sch5627. 2072 2073config SENSORS_SCH5636 2074 tristate "SMSC SCH5636" 2075 depends on HAS_IOPORT 2076 depends on !PPC && WATCHDOG 2077 select SENSORS_SCH56XX_COMMON 2078 select WATCHDOG_CORE 2079 help 2080 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 2081 hardware monitoring solutions, allowing motherboard manufacturers to 2082 create their own custom hwmon solution based upon the SCH5636. 2083 2084 Currently this driver only supports the Fujitsu Theseus SCH5636 based 2085 hwmon solution. Say yes here if you want support for the Fujitsu 2086 Theseus' hardware monitoring features including support for the 2087 integrated watchdog. 2088 2089 This driver can also be built as a module. If so, the module 2090 will be called sch5636. 2091 2092config SENSORS_STTS751 2093 tristate "ST Microelectronics STTS751" 2094 depends on I2C 2095 help 2096 If you say yes here you get support for STTS751 2097 temperature sensor chips. 2098 2099 This driver can also be built as a module. If so, the module 2100 will be called stts751. 2101 2102config SENSORS_SFCTEMP 2103 tristate "Starfive JH71x0 temperature sensor" 2104 depends on ARCH_STARFIVE || COMPILE_TEST 2105 help 2106 If you say yes here you get support for temperature sensor 2107 on the Starfive JH71x0 SoCs. 2108 2109 This driver can also be built as a module. If so, the module 2110 will be called sfctemp. 2111 2112config SENSORS_SG2042_MCU 2113 tristate "Sophgo onboard MCU support" 2114 depends on I2C 2115 depends on ARCH_SOPHGO || COMPILE_TEST 2116 help 2117 Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides 2118 power control and some basic information. 2119 2120 This driver can be built as a module. If so, the module 2121 will be called sg2042-mcu. 2122 2123config SENSORS_SURFACE_FAN 2124 tristate "Surface Fan Driver" 2125 depends on SURFACE_AGGREGATOR 2126 depends on SURFACE_AGGREGATOR_BUS 2127 help 2128 Driver that provides monitoring of the fan on Surface Pro devices that 2129 have a fan, like the Surface Pro 9. 2130 2131 This makes the fan's current speed accessible through the hwmon 2132 system. It does not provide control over the fan, the firmware is 2133 responsible for that, this driver merely provides monitoring. 2134 2135 Select M or Y here, if you want to be able to read the fan's speed. 2136 2137config SENSORS_SURFACE_TEMP 2138 tristate "Microsoft Surface Thermal Sensor Driver" 2139 depends on SURFACE_AGGREGATOR 2140 depends on SURFACE_AGGREGATOR_BUS 2141 help 2142 Driver for monitoring thermal sensors connected via the Surface 2143 Aggregator Module (embedded controller) on Microsoft Surface devices. 2144 2145 This driver can also be built as a module. If so, the module 2146 will be called surface_temp. 2147 2148config SENSORS_ADC128D818 2149 tristate "Texas Instruments ADC128D818" 2150 depends on I2C 2151 help 2152 If you say yes here you get support for the Texas Instruments 2153 ADC128D818 System Monitor with Temperature Sensor chip. 2154 2155 This driver can also be built as a module. If so, the module 2156 will be called adc128d818. 2157 2158config SENSORS_ADS7828 2159 tristate "Texas Instruments ADS7828 and compatibles" 2160 depends on I2C 2161 select REGMAP_I2C 2162 help 2163 If you say yes here you get support for Texas Instruments ADS7828 and 2164 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 2165 it is 8-bit on ADS7830. 2166 2167 This driver can also be built as a module. If so, the module 2168 will be called ads7828. 2169 2170config SENSORS_ADS7871 2171 tristate "Texas Instruments ADS7871 A/D converter" 2172 depends on SPI 2173 help 2174 If you say yes here you get support for TI ADS7871 & ADS7870 2175 2176 This driver can also be built as a module. If so, the module 2177 will be called ads7871. 2178 2179config SENSORS_AMC6821 2180 tristate "Texas Instruments AMC6821" 2181 depends on I2C 2182 select REGMAP_I2C 2183 help 2184 If you say yes here you get support for the Texas Instruments 2185 AMC6821 hardware monitoring chips. 2186 2187 This driver can also be built as a module. If so, the module 2188 will be called amc6821. 2189 2190config SENSORS_INA209 2191 tristate "TI / Burr Brown INA209" 2192 depends on I2C 2193 help 2194 If you say yes here you get support for the TI / Burr Brown INA209 2195 voltage / current / power monitor I2C interface. 2196 2197 This driver can also be built as a module. If so, the module will 2198 be called ina209. 2199 2200config SENSORS_INA2XX 2201 tristate "Texas Instruments INA219 and compatibles" 2202 depends on I2C 2203 select REGMAP_I2C 2204 help 2205 If you say yes here you get support for INA219, INA220, INA226, 2206 INA230, INA231, INA260, and SY24655 power monitor chips. 2207 2208 The INA2xx driver is configured for the default configuration of 2209 the part as described in the datasheet. 2210 Default value for Rshunt is 10 mOhms except for INA260 which has an 2211 internal 2 mOhm shunt resistor. 2212 This driver can also be built as a module. If so, the module 2213 will be called ina2xx. 2214 2215config SENSORS_INA238 2216 tristate "Texas Instruments INA238" 2217 depends on I2C 2218 select REGMAP_I2C 2219 help 2220 If you say yes here you get support for the INA238 power monitor 2221 chip. This driver supports voltage, current, power and temperature 2222 measurements as well as alarm configuration. 2223 2224 This driver can also be built as a module. If so, the module 2225 will be called ina238. 2226 2227config SENSORS_INA3221 2228 tristate "Texas Instruments INA3221 Triple Power Monitor" 2229 depends on I2C 2230 select REGMAP_I2C 2231 help 2232 If you say yes here you get support for the TI INA3221 Triple Power 2233 Monitor. 2234 2235 This driver can also be built as a module. If so, the module 2236 will be called ina3221. 2237 2238config SENSORS_SPD5118 2239 tristate "SPD5118 Compliant Temperature Sensors" 2240 depends on I2C 2241 select REGMAP_I2C 2242 help 2243 If you say yes here you get support for SPD5118 (JEDEC JESD300) 2244 compliant temperature sensors. Such sensors are found on DDR5 memory 2245 modules. 2246 2247 This driver can also be built as a module. If so, the module 2248 will be called spd5118. 2249 2250config SENSORS_SPD5118_DETECT 2251 bool "Enable detect function" 2252 depends on SENSORS_SPD5118 2253 default (!DMI || !X86) 2254 help 2255 If enabled, the driver auto-detects if a chip in the SPD address 2256 range is compliant to the SPD51888 standard and auto-instantiates 2257 if that is the case. If disabled, SPD5118 compliant devices have 2258 to be instantiated by other means. On X86 systems with DMI support 2259 this will typically be done from DMI DDR detection code in the 2260 I2C SMBus subsystem. Devicetree based systems will instantiate 2261 attached devices if the DIMMs are listed in the devicetree file. 2262 2263 Disabling the detect function will speed up boot time and reduce 2264 the risk of mis-detecting SPD5118 compliant devices. However, it 2265 may result in missed DIMMs under some circumstances. 2266 2267 If unsure, say Y. 2268 2269config SENSORS_TC74 2270 tristate "Microchip TC74" 2271 depends on I2C 2272 help 2273 If you say yes here you get support for Microchip TC74 single 2274 input temperature sensor chips. 2275 2276 This driver can also be built as a module. If so, the module 2277 will be called tc74. 2278 2279config SENSORS_THMC50 2280 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2281 depends on I2C 2282 help 2283 If you say yes here you get support for Texas Instruments THMC50 2284 sensor chips and clones: the Analog Devices ADM1022. 2285 2286 This driver can also be built as a module. If so, the module 2287 will be called thmc50. 2288 2289config SENSORS_TMP102 2290 tristate "Texas Instruments TMP102" 2291 depends on I2C 2292 select REGMAP_I2C 2293 help 2294 If you say yes here you get support for Texas Instruments TMP102 2295 sensor chips. 2296 2297 This driver can also be built as a module. If so, the module 2298 will be called tmp102. 2299 2300config SENSORS_TMP103 2301 tristate "Texas Instruments TMP103" 2302 depends on I2C 2303 select REGMAP_I2C 2304 help 2305 If you say yes here you get support for Texas Instruments TMP103 2306 sensor chips. 2307 2308 This driver can also be built as a module. If so, the module 2309 will be called tmp103. 2310 2311config SENSORS_TMP108 2312 tristate "Texas Instruments TMP108" 2313 depends on I2C 2314 depends on I3C || !I3C 2315 select REGMAP_I2C 2316 select REGMAP_I3C if I3C 2317 help 2318 If you say yes here you get support for Texas Instruments TMP108 2319 sensor chips and NXP P3T1085. 2320 2321 This driver can also be built as a module. If so, the module 2322 will be called tmp108. 2323 2324config SENSORS_TMP401 2325 tristate "Texas Instruments TMP401 and compatibles" 2326 depends on I2C 2327 select REGMAP 2328 help 2329 If you say yes here you get support for Texas Instruments TMP401, 2330 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2331 2332 This driver can also be built as a module. If so, the module 2333 will be called tmp401. 2334 2335config SENSORS_TMP421 2336 tristate "Texas Instruments TMP421 and compatible" 2337 depends on I2C 2338 help 2339 If you say yes here you get support for Texas Instruments TMP421, 2340 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2341 2342 This driver can also be built as a module. If so, the module 2343 will be called tmp421. 2344 2345config SENSORS_TMP464 2346 tristate "Texas Instruments TMP464 and compatible" 2347 depends on I2C 2348 select REGMAP_I2C 2349 help 2350 If you say yes here you get support for Texas Instruments TMP464 2351 and TMP468 temperature sensor chips. 2352 2353 This driver can also be built as a module. If so, the module 2354 will be called tmp464. 2355 2356config SENSORS_TMP513 2357 tristate "Texas Instruments TMP513 and compatibles" 2358 depends on I2C 2359 select REGMAP_I2C 2360 help 2361 If you say yes here you get support for Texas Instruments TMP512, 2362 and TMP513 temperature and power supply sensor chips. 2363 2364 This driver can also be built as a module. If so, the module 2365 will be called tmp513. 2366 2367config SENSORS_VEXPRESS 2368 tristate "Versatile Express" 2369 depends on VEXPRESS_CONFIG 2370 help 2371 This driver provides support for hardware sensors available on 2372 the ARM Ltd's Versatile Express platform. It can provide wide 2373 range of information like temperature, power, energy. 2374 2375config SENSORS_VIA_CPUTEMP 2376 tristate "VIA CPU temperature sensor" 2377 depends on X86 2378 select HWMON_VID 2379 help 2380 If you say yes here you get support for the temperature 2381 sensor inside your CPU. Supported are all known variants of 2382 the VIA C7 and Nano. 2383 2384config SENSORS_VIA686A 2385 tristate "VIA686A" 2386 depends on PCI && HAS_IOPORT 2387 help 2388 If you say yes here you get support for the integrated sensors in 2389 Via 686A/B South Bridges. 2390 2391 This driver can also be built as a module. If so, the module 2392 will be called via686a. 2393 2394config SENSORS_VT1211 2395 tristate "VIA VT1211" 2396 depends on HAS_IOPORT 2397 depends on !PPC 2398 select HWMON_VID 2399 help 2400 If you say yes here then you get support for hardware monitoring 2401 features of the VIA VT1211 Super-I/O chip. 2402 2403 This driver can also be built as a module. If so, the module 2404 will be called vt1211. 2405 2406config SENSORS_VT8231 2407 tristate "VIA VT8231" 2408 depends on PCI && HAS_IOPORT 2409 select HWMON_VID 2410 help 2411 If you say yes here then you get support for the integrated sensors 2412 in the VIA VT8231 device. 2413 2414 This driver can also be built as a module. If so, the module 2415 will be called vt8231. 2416 2417config SENSORS_W83773G 2418 tristate "Nuvoton W83773G" 2419 depends on I2C 2420 select REGMAP_I2C 2421 help 2422 If you say yes here you get support for the Nuvoton W83773G hardware 2423 monitoring chip. 2424 2425 This driver can also be built as a module. If so, the module 2426 will be called w83773g. 2427 2428config SENSORS_W83781D 2429 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2430 depends on I2C 2431 select HWMON_VID 2432 help 2433 If you say yes here you get support for the Winbond W8378x series 2434 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2435 Asus AS99127F. 2436 2437 This driver can also be built as a module. If so, the module 2438 will be called w83781d. 2439 2440config SENSORS_W83791D 2441 tristate "Winbond W83791D" 2442 depends on I2C 2443 select HWMON_VID 2444 help 2445 If you say yes here you get support for the Winbond W83791D chip. 2446 2447 This driver can also be built as a module. If so, the module 2448 will be called w83791d. 2449 2450config SENSORS_W83792D 2451 tristate "Winbond W83792D" 2452 depends on I2C 2453 help 2454 If you say yes here you get support for the Winbond W83792D chip. 2455 2456 This driver can also be built as a module. If so, the module 2457 will be called w83792d. 2458 2459config SENSORS_W83793 2460 tristate "Winbond W83793" 2461 depends on I2C 2462 select HWMON_VID 2463 help 2464 If you say yes here you get support for the Winbond W83793 2465 hardware monitoring chip, including support for the integrated 2466 watchdog. 2467 2468 This driver can also be built as a module. If so, the module 2469 will be called w83793. 2470 2471config SENSORS_W83795 2472 tristate "Winbond/Nuvoton W83795G/ADG" 2473 depends on I2C 2474 help 2475 If you say yes here you get support for the Winbond W83795G and 2476 W83795ADG hardware monitoring chip, including manual fan speed 2477 control. 2478 2479 This driver can also be built as a module. If so, the module 2480 will be called w83795. 2481 2482config SENSORS_W83795_FANCTRL 2483 bool "Include automatic fan control support" 2484 depends on SENSORS_W83795 2485 help 2486 If you say yes here, support for automatic fan speed control 2487 will be included in the driver. 2488 2489 Please also note that this option will create sysfs attribute 2490 files which may change in the future, so you shouldn't rely 2491 on them being stable. 2492 2493config SENSORS_W83L785TS 2494 tristate "Winbond W83L785TS-S" 2495 depends on I2C 2496 help 2497 If you say yes here you get support for the Winbond W83L785TS-S 2498 sensor chip, which is used on the Asus A7N8X, among other 2499 motherboards. 2500 2501 This driver can also be built as a module. If so, the module 2502 will be called w83l785ts. 2503 2504config SENSORS_W83L786NG 2505 tristate "Winbond W83L786NG, W83L786NR" 2506 depends on I2C 2507 help 2508 If you say yes here you get support for the Winbond W83L786NG 2509 and W83L786NR sensor chips. 2510 2511 This driver can also be built as a module. If so, the module 2512 will be called w83l786ng. 2513 2514config SENSORS_W83627HF 2515 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2516 depends on HAS_IOPORT 2517 depends on !PPC 2518 select HWMON_VID 2519 help 2520 If you say yes here you get support for the Winbond W836X7 series 2521 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2522 W83697HF. 2523 2524 This driver can also be built as a module. If so, the module 2525 will be called w83627hf. 2526 2527config SENSORS_W83627EHF 2528 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2529 depends on HAS_IOPORT 2530 depends on !PPC 2531 select HWMON_VID 2532 help 2533 If you say yes here you get support for the hardware 2534 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2535 2536 This driver also supports the W83627EHG, which is the lead-free 2537 version of the W83627EHF, and the W83627DHG, which is a similar 2538 chip suited for specific Intel processors that use PECI such as 2539 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2540 version of the W83627DHG (as far as hardware monitoring goes.) 2541 2542 This driver also supports Nuvoton W83667HG and W83667HG-B. 2543 2544 This driver can also be built as a module. If so, the module 2545 will be called w83627ehf. 2546 2547config SENSORS_WM831X 2548 tristate "WM831x PMICs" 2549 depends on MFD_WM831X 2550 help 2551 If you say yes here you get support for the hardware 2552 monitoring functionality of the Wolfson Microelectronics 2553 WM831x series of PMICs. 2554 2555 This driver can also be built as a module. If so, the module 2556 will be called wm831x-hwmon. 2557 2558config SENSORS_WM8350 2559 tristate "Wolfson Microelectronics WM835x" 2560 depends on MFD_WM8350 2561 help 2562 If you say yes here you get support for the hardware 2563 monitoring features of the WM835x series of PMICs. 2564 2565 This driver can also be built as a module. If so, the module 2566 will be called wm8350-hwmon. 2567 2568config SENSORS_ULTRA45 2569 tristate "Sun Ultra45 PIC16F747" 2570 depends on SPARC64 2571 help 2572 This driver provides support for the Ultra45 workstation environmental 2573 sensors. 2574 2575config SENSORS_XGENE 2576 tristate "APM X-Gene SoC hardware monitoring driver" 2577 depends on XGENE_SLIMPRO_MBOX || PCC 2578 help 2579 If you say yes here you get support for the temperature 2580 and power sensors for APM X-Gene SoC. 2581 2582config SENSORS_INTEL_M10_BMC_HWMON 2583 tristate "Intel MAX10 BMC Hardware Monitoring" 2584 depends on MFD_INTEL_M10_BMC_CORE 2585 help 2586 This driver provides support for the hardware monitoring functionality 2587 on Intel MAX10 BMC chip. 2588 2589 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2590 sensors monitor various telemetry data of different components on the 2591 card, e.g. board temperature, FPGA core temperature/voltage/current. 2592 2593if ACPI 2594 2595comment "ACPI drivers" 2596 2597config SENSORS_ACPI_POWER 2598 tristate "ACPI 4.0 power meter" 2599 help 2600 This driver exposes ACPI 4.0 power meters as hardware monitoring 2601 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2602 and a power meter. 2603 2604 To compile this driver as a module, choose M here: 2605 the module will be called acpi_power_meter. 2606 2607config SENSORS_ATK0110 2608 tristate "ASUS ATK0110" 2609 depends on X86 2610 help 2611 If you say yes here you get support for the ACPI hardware 2612 monitoring interface found in many ASUS motherboards. This 2613 driver will provide readings of fans, voltages and temperatures 2614 through the system firmware. 2615 2616 This driver can also be built as a module. If so, the module 2617 will be called asus_atk0110. 2618 2619config SENSORS_ASUS_WMI 2620 tristate "ASUS WMI X370/X470/B450/X399" 2621 depends on ACPI_WMI 2622 help 2623 If you say yes here you get support for the ACPI hardware monitoring 2624 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2625 will provide readings of fans, voltages and temperatures through the system 2626 firmware. 2627 2628 This driver can also be built as a module. If so, the module 2629 will be called asus_wmi_sensors. 2630 2631config SENSORS_ASUS_EC 2632 tristate "ASUS EC Sensors" 2633 depends on X86 2634 depends on ACPI_EC 2635 help 2636 If you say yes here you get support for the ACPI embedded controller 2637 hardware monitoring interface found in ASUS motherboards. The driver 2638 currently supports B550/X570 boards, although other ASUS boards might 2639 provide this monitoring interface as well. 2640 2641 This driver can also be built as a module. If so, the module 2642 will be called asus_ec_sensors. 2643 2644config SENSORS_HP_WMI 2645 tristate "HP WMI Sensors" 2646 depends on ACPI_WMI 2647 help 2648 If you say yes here you get support for the ACPI hardware monitoring 2649 interface found in HP (and some HP Compaq) business-class computers. 2650 Available sensors vary between systems. Temperature and fan speed 2651 sensors are the most common. 2652 2653 This driver can also be built as a module. If so, the module 2654 will be called hp_wmi_sensors. 2655 2656endif # ACPI 2657 2658endif # HWMON 2659