1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on X86 && DMI 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on X86 && DMI 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1021 109 tristate "Analog Devices ADM1021 and compatibles" 110 depends on I2C 111 depends on SENSORS_LM90=n 112 help 113 If you say yes here you get support for Analog Devices ADM1021 114 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, 115 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. 116 117 This driver can also be built as a module. If so, the module 118 will be called adm1021. 119 120config SENSORS_ADM1025 121 tristate "Analog Devices ADM1025 and compatibles" 122 depends on I2C 123 select HWMON_VID 124 help 125 If you say yes here you get support for Analog Devices ADM1025 126 and Philips NE1619 sensor chips. 127 128 This driver can also be built as a module. If so, the module 129 will be called adm1025. 130 131config SENSORS_ADM1026 132 tristate "Analog Devices ADM1026 and compatibles" 133 depends on I2C 134 select HWMON_VID 135 help 136 If you say yes here you get support for Analog Devices ADM1026 137 sensor chip. 138 139 This driver can also be built as a module. If so, the module 140 will be called adm1026. 141 142config SENSORS_ADM1029 143 tristate "Analog Devices ADM1029" 144 depends on I2C 145 help 146 If you say yes here you get support for Analog Devices ADM1029 147 sensor chip. 148 Very rare chip, please let us know you use it. 149 150 This driver can also be built as a module. If so, the module 151 will be called adm1029. 152 153config SENSORS_ADM1031 154 tristate "Analog Devices ADM1031 and compatibles" 155 depends on I2C 156 help 157 If you say yes here you get support for Analog Devices ADM1031 158 and ADM1030 sensor chips. 159 160 This driver can also be built as a module. If so, the module 161 will be called adm1031. 162 163config SENSORS_ADM1177 164 tristate "Analog Devices ADM1177 and compatibles" 165 depends on I2C 166 help 167 If you say yes here you get support for Analog Devices ADM1177 168 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm1177. 172 173config SENSORS_ADM9240 174 tristate "Analog Devices ADM9240 and compatibles" 175 depends on I2C 176 select HWMON_VID 177 help 178 If you say yes here you get support for Analog Devices ADM9240, 179 Dallas DS1780, National Semiconductor LM81 sensor chips. 180 181 This driver can also be built as a module. If so, the module 182 will be called adm9240. 183 184config SENSORS_ADT7X10 185 tristate 186 select REGMAP 187 help 188 This module contains common code shared by the ADT7310/ADT7320 and 189 ADT7410/ADT7420 temperature monitoring chip drivers. 190 191 If built as a module, the module will be called adt7x10. 192 193config SENSORS_ADT7310 194 tristate "Analog Devices ADT7310/ADT7320" 195 depends on SPI_MASTER 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7310 and ADT7320 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7310. 203 204config SENSORS_ADT7410 205 tristate "Analog Devices ADT7410/ADT7420" 206 depends on I2C 207 select SENSORS_ADT7X10 208 help 209 If you say yes here you get support for the Analog Devices 210 ADT7410 and ADT7420 temperature monitoring chips. 211 212 This driver can also be built as a module. If so, the module 213 will be called adt7410. 214 215config SENSORS_ADT7411 216 tristate "Analog Devices ADT7411" 217 depends on I2C 218 help 219 If you say yes here you get support for the Analog Devices 220 ADT7411 voltage and temperature monitoring chip. 221 222 This driver can also be built as a module. If so, the module 223 will be called adt7411. 224 225config SENSORS_ADT7462 226 tristate "Analog Devices ADT7462" 227 depends on I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7462 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7462. 234 235config SENSORS_ADT7470 236 tristate "Analog Devices ADT7470" 237 depends on I2C 238 help 239 If you say yes here you get support for the Analog Devices 240 ADT7470 temperature monitoring chips. 241 242 This driver can also be built as a module. If so, the module 243 will be called adt7470. 244 245config SENSORS_ADT7475 246 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 247 depends on I2C 248 select HWMON_VID 249 help 250 If you say yes here you get support for the Analog Devices 251 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 252 chips. 253 254 This driver can also be built as a module. If so, the module 255 will be called adt7475. 256 257config SENSORS_AHT10 258 tristate "Aosong AHT10, AHT20" 259 depends on I2C 260 select CRC8 261 help 262 If you say yes here, you get support for the Aosong AHT10 and AHT20 263 temperature and humidity sensors 264 265 This driver can also be built as a module. If so, the module 266 will be called aht10. 267 268config SENSORS_AQUACOMPUTER_D5NEXT 269 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 270 depends on USB_HID 271 select CRC16 272 help 273 If you say yes here you get support for sensors and fans of 274 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 275 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 276 Next sensor, where available. 277 278 This driver can also be built as a module. If so, the module 279 will be called aquacomputer_d5next. 280 281config SENSORS_AS370 282 tristate "Synaptics AS370 SoC hardware monitoring driver" 283 help 284 If you say yes here you get support for the PVT sensors of 285 the Synaptics AS370 SoC 286 287 This driver can also be built as a module. If so, the module 288 will be called as370-hwmon. 289 290 291config SENSORS_ASC7621 292 tristate "Andigilog aSC7621" 293 depends on I2C 294 help 295 If you say yes here you get support for the aSC7621 296 family of SMBus sensors chip found on most Intel X38, X48, X58, 297 945, 965 and 975 desktop boards. Currently supported chips: 298 aSC7621 299 aSC7621a 300 301 This driver can also be built as a module. If so, the module 302 will be called asc7621. 303 304config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NB 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338config SENSORS_FAM15H_POWER 339 tristate "AMD Family 15h processor power" 340 depends on X86 && PCI && CPU_SUP_AMD 341 help 342 If you say yes here you get support for processor power 343 information of your AMD family 15h CPU. 344 345 This driver can also be built as a module. If so, the module 346 will be called fam15h_power. 347 348config SENSORS_APPLESMC 349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 350 depends on INPUT && X86 351 select NEW_LEDS 352 select LEDS_CLASS 353 help 354 This driver provides support for the Apple System Management 355 Controller, which provides an accelerometer (Apple Sudden Motion 356 Sensor), light sensors, temperature sensors, keyboard backlight 357 control and fan control. 358 359 Only Intel-based Apple's computers are supported (MacBook Pro, 360 MacBook, MacMini). 361 362 Data from the different sensors, keyboard backlight control and fan 363 control are accessible via sysfs. 364 365 This driver also provides an absolute input class device, allowing 366 the laptop to act as a pinball machine-esque joystick. 367 368 Say Y here if you have an applicable laptop and want to experience 369 the awesome power of applesmc. 370 371config SENSORS_ARM_SCMI 372 tristate "ARM SCMI Sensors" 373 depends on ARM_SCMI_PROTOCOL 374 depends on THERMAL || !THERMAL_OF 375 help 376 This driver provides support for temperature, voltage, current 377 and power sensors available on SCMI based platforms. The actual 378 number and type of sensors exported depend on the platform. 379 380 This driver can also be built as a module. If so, the module 381 will be called scmi-hwmon. 382 383config SENSORS_ARM_SCPI 384 tristate "ARM SCPI Sensors" 385 depends on ARM_SCPI_PROTOCOL 386 depends on THERMAL || !THERMAL_OF 387 help 388 This driver provides support for temperature, voltage, current 389 and power sensors available on ARM Ltd's SCP based platforms. The 390 actual number and type of sensors exported depend on the platform. 391 392config SENSORS_ASB100 393 tristate "Asus ASB100 Bach" 394 depends on (X86 || COMPILE_TEST) && I2C 395 select HWMON_VID 396 help 397 If you say yes here you get support for the ASB100 Bach sensor 398 chip found on some Asus mainboards. 399 400 This driver can also be built as a module. If so, the module 401 will be called asb100. 402 403config SENSORS_ASPEED 404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 405 depends on ARCH_ASPEED || COMPILE_TEST 406 depends on THERMAL || THERMAL=n 407 select REGMAP 408 help 409 This driver provides support for ASPEED AST2400/AST2500 PWM 410 and Fan Tacho controllers. 411 412 This driver can also be built as a module. If so, the module 413 will be called aspeed_pwm_tacho. 414 415config SENSORS_ATXP1 416 tristate "Attansic ATXP1 VID controller" 417 depends on I2C 418 select HWMON_VID 419 help 420 If you say yes here you get support for the Attansic ATXP1 VID 421 controller. 422 423 If your board have such a chip, you are able to control your CPU 424 core and other voltages. 425 426 This driver can also be built as a module. If so, the module 427 will be called atxp1. 428 429config SENSORS_BT1_PVT 430 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 431 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 432 select POLYNOMIAL 433 help 434 If you say yes here you get support for Baikal-T1 PVT sensor 435 embedded into the SoC. 436 437 This driver can also be built as a module. If so, the module will be 438 called bt1-pvt. 439 440config SENSORS_BT1_PVT_ALARMS 441 bool "Enable Baikal-T1 PVT sensor alarms" 442 depends on SENSORS_BT1_PVT 443 help 444 Baikal-T1 PVT IP-block provides threshold registers for each 445 supported sensor. But the corresponding interrupts might be 446 generated by the thresholds comparator only in synchronization with 447 a data conversion. Additionally there is only one sensor data can 448 be converted at a time. All of these makes the interface impossible 449 to be used for the hwmon alarms implementation without periodic 450 switch between the PVT sensors. By default the data conversion is 451 performed on demand from the user-space. If this config is enabled 452 the data conversion will be periodically performed and the data will be 453 saved in the internal driver cache. 454 455config SENSORS_CORSAIR_CPRO 456 tristate "Corsair Commander Pro controller" 457 depends on HID 458 help 459 If you say yes here you get support for the Corsair Commander Pro 460 controller. 461 462 This driver can also be built as a module. If so, the module 463 will be called corsair-cpro. 464 465config SENSORS_CORSAIR_PSU 466 tristate "Corsair PSU HID controller" 467 depends on HID 468 help 469 If you say yes here you get support for Corsair PSUs with a HID 470 interface. 471 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 472 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 473 by Corsair. 474 475 This driver can also be built as a module. If so, the module 476 will be called corsair-psu. 477 478config SENSORS_DRIVETEMP 479 tristate "Hard disk drives with temperature sensors" 480 depends on SCSI && ATA 481 help 482 If you say yes you get support for the temperature sensor on 483 hard disk drives. 484 485 This driver can also be built as a module. If so, the module 486 will be called drivetemp. 487 488config SENSORS_DS620 489 tristate "Dallas Semiconductor DS620" 490 depends on I2C 491 help 492 If you say yes here you get support for Dallas Semiconductor 493 DS620 sensor chip. 494 495 This driver can also be built as a module. If so, the module 496 will be called ds620. 497 498config SENSORS_DS1621 499 tristate "Dallas Semiconductor DS1621 and compatibles" 500 depends on I2C 501 help 502 If you say yes here you get support for Dallas Semiconductor/Maxim 503 Integrated DS1621 sensor chips and compatible models including: 504 505 - Dallas Semiconductor DS1625 506 - Maxim Integrated DS1631 507 - Maxim Integrated DS1721 508 - Maxim Integrated DS1731 509 510 This driver can also be built as a module. If so, the module 511 will be called ds1621. 512 513config SENSORS_DELL_SMM 514 tristate "Dell laptop SMM BIOS hwmon driver" 515 depends on X86 516 imply THERMAL 517 help 518 This hwmon driver adds support for reporting temperature of different 519 sensors and controls the fans on Dell laptops via System Management 520 Mode provided by Dell BIOS. 521 522 When option I8K is also enabled this driver provides legacy /proc/i8k 523 userspace interface for i8kutils package. 524 525config I8K 526 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 527 depends on SENSORS_DELL_SMM 528 depends on PROC_FS 529 help 530 This option enables the legacy /proc/i8k userspace interface of the 531 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 532 version, temperatures and allows control of fan speeds of some Dell 533 laptops. Sometimes it also reports power and hotkey status. 534 535 This interface is required to run programs from the i8kutils package. 536 537 Say Y if you intend to run userspace programs that use this interface. 538 Say N otherwise. 539 540config SENSORS_DA9052_ADC 541 tristate "Dialog DA9052/DA9053 ADC" 542 depends on PMIC_DA9052 543 help 544 Say y here to support the ADC found on Dialog Semiconductor 545 DA9052-BC and DA9053-AA/Bx PMICs. 546 547 This driver can also be built as module. If so, the module 548 will be called da9052-hwmon. 549 550config SENSORS_DA9055 551 tristate "Dialog Semiconductor DA9055 ADC" 552 depends on MFD_DA9055 553 help 554 If you say yes here you get support for ADC on the Dialog 555 Semiconductor DA9055 PMIC. 556 557 This driver can also be built as a module. If so, the module 558 will be called da9055-hwmon. 559 560config SENSORS_I5K_AMB 561 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 562 depends on PCI 563 help 564 If you say yes here you get support for FB-DIMM AMB temperature 565 monitoring chips on systems with the Intel 5000 series chipset. 566 567 This driver can also be built as a module. If so, the module 568 will be called i5k_amb. 569 570config SENSORS_SPARX5 571 tristate "Sparx5 SoC temperature sensor" 572 depends on ARCH_SPARX5 || COMPILE_TEST 573 help 574 If you say yes here you get support for temperature monitoring 575 with the Microchip Sparx5 SoC. 576 577 This driver can also be built as a module. If so, the module 578 will be called sparx5-temp. 579 580config SENSORS_F71805F 581 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 582 depends on !PPC 583 help 584 If you say yes here you get support for hardware monitoring 585 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 586 Super-I/O chips. 587 588 This driver can also be built as a module. If so, the module 589 will be called f71805f. 590 591config SENSORS_F71882FG 592 tristate "Fintek F71882FG and compatibles" 593 depends on !PPC 594 help 595 If you say yes here you get support for hardware monitoring 596 features of many Fintek Super-I/O (LPC) chips. The currently 597 supported chips are: 598 F71808E/A 599 F71858FG 600 F71862FG 601 F71863FG 602 F71869F/E/A 603 F71882FG 604 F71883FG 605 F71889FG/ED/A 606 F8000 607 F81801U 608 F81865F 609 610 This driver can also be built as a module. If so, the module 611 will be called f71882fg. 612 613config SENSORS_F75375S 614 tristate "Fintek F75375S/SP, F75373 and F75387" 615 depends on I2C 616 help 617 If you say yes here you get support for hardware monitoring 618 features of the Fintek F75375S/SP, F75373 and F75387 619 620 This driver can also be built as a module. If so, the module 621 will be called f75375s. 622 623config SENSORS_GSC 624 tristate "Gateworks System Controller ADC" 625 depends on MFD_GATEWORKS_GSC 626 help 627 Support for the Gateworks System Controller A/D converters. 628 629 To compile this driver as a module, choose M here: 630 the module will be called gsc-hwmon. 631 632config SENSORS_MC13783_ADC 633 tristate "Freescale MC13783/MC13892 ADC" 634 depends on MFD_MC13XXX 635 help 636 Support for the A/D converter on MC13783 and MC13892 PMIC. 637 638config SENSORS_FSCHMD 639 tristate "Fujitsu Siemens Computers sensor chips" 640 depends on (X86 || COMPILE_TEST) && I2C 641 help 642 If you say yes here you get support for the following Fujitsu 643 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 644 Heimdall, Heracles, Hades and Syleus including support for the 645 integrated watchdog. 646 647 This is a merged driver for FSC sensor chips replacing the fscpos, 648 fscscy and fscher drivers and adding support for several other FSC 649 sensor chips. 650 651 This driver can also be built as a module. If so, the module 652 will be called fschmd. 653 654config SENSORS_FTSTEUTATES 655 tristate "Fujitsu Technology Solutions sensor chip Teutates" 656 depends on I2C && WATCHDOG 657 select WATCHDOG_CORE 658 help 659 If you say yes here you get support for the Fujitsu Technology 660 Solutions (FTS) sensor chip "Teutates" including support for 661 the integrated watchdog. 662 663 This driver can also be built as a module. If so, the module 664 will be called ftsteutates. 665 666config SENSORS_GL518SM 667 tristate "Genesys Logic GL518SM" 668 depends on I2C 669 help 670 If you say yes here you get support for Genesys Logic GL518SM 671 sensor chips. 672 673 This driver can also be built as a module. If so, the module 674 will be called gl518sm. 675 676config SENSORS_GL520SM 677 tristate "Genesys Logic GL520SM" 678 depends on I2C 679 select HWMON_VID 680 help 681 If you say yes here you get support for Genesys Logic GL520SM 682 sensor chips. 683 684 This driver can also be built as a module. If so, the module 685 will be called gl520sm. 686 687config SENSORS_G760A 688 tristate "GMT G760A" 689 depends on I2C 690 help 691 If you say yes here you get support for Global Mixed-mode 692 Technology Inc G760A fan speed PWM controller chips. 693 694 This driver can also be built as a module. If so, the module 695 will be called g760a. 696 697config SENSORS_G762 698 tristate "GMT G762 and G763" 699 depends on I2C 700 help 701 If you say yes here you get support for Global Mixed-mode 702 Technology Inc G762 and G763 fan speed PWM controller chips. 703 704 This driver can also be built as a module. If so, the module 705 will be called g762. 706 707config SENSORS_GPIO_FAN 708 tristate "GPIO fan" 709 depends on OF_GPIO 710 depends on GPIOLIB || COMPILE_TEST 711 depends on THERMAL || THERMAL=n 712 help 713 If you say yes here you get support for fans connected to GPIO lines. 714 715 This driver can also be built as a module. If so, the module 716 will be called gpio-fan. 717 718config SENSORS_GXP_FAN_CTRL 719 tristate "HPE GXP fan controller" 720 depends on ARCH_HPE_GXP || COMPILE_TEST 721 help 722 If you say yes here you get support for GXP fan control functionality. 723 724 The GXP controls fan function via the CPLD through the use of PWM 725 registers. This driver reports status and pwm setting of the fans. 726 727config SENSORS_HIH6130 728 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 729 depends on I2C 730 help 731 If you say yes here you get support for Honeywell Humidicon 732 HIH-6130 and HIH-6131 Humidicon humidity sensors. 733 734 This driver can also be built as a module. If so, the module 735 will be called hih6130. 736 737config SENSORS_HS3001 738 tristate "Renesas HS3001 humidity and temperature sensors" 739 depends on I2C 740 help 741 If you say yes here you get support for the Renesas HS3001, 742 to HS3004 humidity and temperature sensors. 743 744 This driver can also be built as a module. If so, the module 745 will be called hs3001. 746 747config SENSORS_IBMAEM 748 tristate "IBM Active Energy Manager temperature/power sensors and control" 749 select IPMI_SI 750 depends on IPMI_HANDLER 751 help 752 If you say yes here you get support for the temperature and 753 power sensors and capping hardware in various IBM System X 754 servers that support Active Energy Manager. This includes 755 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 756 and certain HC10/HS2x/LS2x/QS2x blades. 757 758 This driver can also be built as a module. If so, the module 759 will be called ibmaem. 760 761config SENSORS_IBMPEX 762 tristate "IBM PowerExecutive temperature/power sensors" 763 select IPMI_SI 764 depends on IPMI_HANDLER 765 help 766 If you say yes here you get support for the temperature and 767 power sensors in various IBM System X servers that support 768 PowerExecutive. So far this includes the x3350, x3550, x3650, 769 x3655, and x3755; the x3800, x3850, and x3950 models that have 770 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 771 772 This driver can also be built as a module. If so, the module 773 will be called ibmpex. 774 775config SENSORS_IBMPOWERNV 776 tristate "IBM POWERNV platform sensors" 777 depends on PPC_POWERNV 778 default y 779 help 780 If you say yes here you get support for the temperature/fan/power 781 sensors on your PowerNV platform. 782 783 This driver can also be built as a module. If so, the module 784 will be called ibmpowernv. 785 786config SENSORS_IIO_HWMON 787 tristate "Hwmon driver that uses channels specified via iio maps" 788 depends on IIO 789 help 790 This is a platform driver that in combination with a suitable 791 map allows IIO devices to provide basic hwmon functionality 792 for those channels specified in the map. This map can be provided 793 either via platform data or the device tree bindings. 794 795config SENSORS_I5500 796 tristate "Intel 5500/5520/X58 temperature sensor" 797 depends on X86 && PCI 798 help 799 If you say yes here you get support for the temperature 800 sensor inside the Intel 5500, 5520 and X58 chipsets. 801 802 This driver can also be built as a module. If so, the module 803 will be called i5500_temp. 804 805config SENSORS_CORETEMP 806 tristate "Intel Core/Core2/Atom temperature sensor" 807 depends on X86 808 help 809 If you say yes here you get support for the temperature 810 sensor inside your CPU. Most of the family 6 CPUs 811 are supported. Check Documentation/hwmon/coretemp.rst for details. 812 813config SENSORS_IT87 814 tristate "ITE IT87xx and compatibles" 815 depends on !PPC 816 select HWMON_VID 817 help 818 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 819 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 820 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 821 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 822 clone. 823 824 This driver can also be built as a module. If so, the module 825 will be called it87. 826 827config SENSORS_JC42 828 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 829 depends on I2C 830 select REGMAP_I2C 831 help 832 If you say yes here, you get support for JEDEC JC42.4 compliant 833 temperature sensors, which are used on many DDR3 memory modules for 834 mobile devices and servers. Support will include, but not be limited 835 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 836 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 837 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 838 839 This driver can also be built as a module. If so, the module 840 will be called jc42. 841 842config SENSORS_POWR1220 843 tristate "Lattice POWR1220 Power Monitoring" 844 depends on I2C 845 help 846 If you say yes here you get access to the hardware monitoring 847 functions of the Lattice POWR1220 isp Power Supply Monitoring, 848 Sequencing and Margining Controller. 849 850 This driver can also be built as a module. If so, the module 851 will be called powr1220. 852 853config SENSORS_LAN966X 854 tristate "Microchip LAN966x Hardware Monitoring" 855 depends on SOC_LAN966 || COMPILE_TEST 856 select REGMAP 857 select POLYNOMIAL 858 help 859 If you say yes here you get support for temperature monitoring 860 on the Microchip LAN966x SoC. 861 862 This driver can also be built as a module. If so, the module 863 will be called lan966x-hwmon. 864 865config SENSORS_LINEAGE 866 tristate "Lineage Compact Power Line Power Entry Module" 867 depends on I2C 868 help 869 If you say yes here you get support for the Lineage Compact Power Line 870 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 871 CP2000DC, CP2725, and others. 872 873 This driver can also be built as a module. If so, the module 874 will be called lineage-pem. 875 876config SENSORS_LOCHNAGAR 877 tristate "Lochnagar Hardware Monitor" 878 depends on MFD_LOCHNAGAR 879 help 880 If you say yes here you get support for Lochnagar 2 temperature, 881 voltage and current sensors abilities. 882 883 This driver can also be built as a module. If so, the module 884 will be called lochnagar-hwmon. 885 886config SENSORS_LTC2945 887 tristate "Linear Technology LTC2945" 888 depends on I2C 889 select REGMAP_I2C 890 help 891 If you say yes here you get support for Linear Technology LTC2945 892 I2C System Monitor. 893 894 This driver can also be built as a module. If so, the module will 895 be called ltc2945. 896 897config SENSORS_LTC2947 898 tristate 899 900config SENSORS_LTC2947_I2C 901 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 902 depends on I2C 903 select REGMAP_I2C 904 select SENSORS_LTC2947 905 help 906 If you say yes here you get support for Linear Technology LTC2947 907 I2C High Precision Power and Energy Monitor 908 909 This driver can also be built as a module. If so, the module will 910 be called ltc2947-i2c. 911 912config SENSORS_LTC2947_SPI 913 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 914 depends on SPI_MASTER 915 select REGMAP_SPI 916 select SENSORS_LTC2947 917 help 918 If you say yes here you get support for Linear Technology LTC2947 919 SPI High Precision Power and Energy Monitor 920 921 This driver can also be built as a module. If so, the module will 922 be called ltc2947-spi. 923 924config SENSORS_LTC2990 925 tristate "Linear Technology LTC2990" 926 depends on I2C 927 help 928 If you say yes here you get support for Linear Technology LTC2990 929 I2C System Monitor. The LTC2990 supports a combination of voltage, 930 current and temperature monitoring. 931 932 This driver can also be built as a module. If so, the module will 933 be called ltc2990. 934 935config SENSORS_LTC2992 936 tristate "Linear Technology LTC2992" 937 depends on I2C 938 depends on GPIOLIB 939 help 940 If you say yes here you get support for Linear Technology LTC2992 941 I2C System Monitor. The LTC2992 measures current, voltage, and 942 power of two supplies. 943 944 This driver can also be built as a module. If so, the module will 945 be called ltc2992. 946 947config SENSORS_LTC4151 948 tristate "Linear Technology LTC4151" 949 depends on I2C 950 help 951 If you say yes here you get support for Linear Technology LTC4151 952 High Voltage I2C Current and Voltage Monitor interface. 953 954 This driver can also be built as a module. If so, the module will 955 be called ltc4151. 956 957config SENSORS_LTC4215 958 tristate "Linear Technology LTC4215" 959 depends on I2C 960 help 961 If you say yes here you get support for Linear Technology LTC4215 962 Hot Swap Controller I2C interface. 963 964 This driver can also be built as a module. If so, the module will 965 be called ltc4215. 966 967config SENSORS_LTC4222 968 tristate "Linear Technology LTC4222" 969 depends on I2C 970 select REGMAP_I2C 971 help 972 If you say yes here you get support for Linear Technology LTC4222 973 Dual Hot Swap Controller I2C interface. 974 975 This driver can also be built as a module. If so, the module will 976 be called ltc4222. 977 978config SENSORS_LTC4245 979 tristate "Linear Technology LTC4245" 980 depends on I2C 981 help 982 If you say yes here you get support for Linear Technology LTC4245 983 Multiple Supply Hot Swap Controller I2C interface. 984 985 This driver can also be built as a module. If so, the module will 986 be called ltc4245. 987 988config SENSORS_LTC4260 989 tristate "Linear Technology LTC4260" 990 depends on I2C 991 select REGMAP_I2C 992 help 993 If you say yes here you get support for Linear Technology LTC4260 994 Positive Voltage Hot Swap Controller I2C interface. 995 996 This driver can also be built as a module. If so, the module will 997 be called ltc4260. 998 999config SENSORS_LTC4261 1000 tristate "Linear Technology LTC4261" 1001 depends on I2C 1002 help 1003 If you say yes here you get support for Linear Technology LTC4261 1004 Negative Voltage Hot Swap Controller I2C interface. 1005 1006 This driver can also be built as a module. If so, the module will 1007 be called ltc4261. 1008 1009config SENSORS_LTQ_CPUTEMP 1010 bool "Lantiq cpu temperature sensor driver" 1011 depends on SOC_XWAY 1012 help 1013 If you say yes here you get support for the temperature 1014 sensor inside your CPU. 1015 1016config SENSORS_MAX1111 1017 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1018 depends on SPI_MASTER 1019 help 1020 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1021 ADC chips. 1022 1023 This driver can also be built as a module. If so, the module 1024 will be called max1111. 1025 1026config SENSORS_MAX127 1027 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1028 depends on I2C 1029 help 1030 Say y here to support Maxim's MAX127 DAS chips. 1031 1032 This driver can also be built as a module. If so, the module 1033 will be called max127. 1034 1035config SENSORS_MAX16065 1036 tristate "Maxim MAX16065 System Manager and compatibles" 1037 depends on I2C 1038 help 1039 If you say yes here you get support for hardware monitoring 1040 capabilities of the following Maxim System Manager chips. 1041 MAX16065 1042 MAX16066 1043 MAX16067 1044 MAX16068 1045 MAX16070 1046 MAX16071 1047 1048 This driver can also be built as a module. If so, the module 1049 will be called max16065. 1050 1051config SENSORS_MAX1619 1052 tristate "Maxim MAX1619 sensor chip" 1053 depends on I2C 1054 help 1055 If you say yes here you get support for MAX1619 sensor chip. 1056 1057 This driver can also be built as a module. If so, the module 1058 will be called max1619. 1059 1060config SENSORS_MAX1668 1061 tristate "Maxim MAX1668 and compatibles" 1062 depends on I2C 1063 help 1064 If you say yes here you get support for MAX1668, MAX1989 and 1065 MAX1805 chips. 1066 1067 This driver can also be built as a module. If so, the module 1068 will be called max1668. 1069 1070config SENSORS_MAX197 1071 tristate "Maxim MAX197 and compatibles" 1072 help 1073 Support for the Maxim MAX197 A/D converter. 1074 Support will include, but not be limited to, MAX197, and MAX199. 1075 1076 This driver can also be built as a module. If so, the module 1077 will be called max197. 1078 1079config SENSORS_MAX31722 1080 tristate "MAX31722 temperature sensor" 1081 depends on SPI 1082 help 1083 Support for the Maxim Integrated MAX31722/MAX31723 digital 1084 thermometers/thermostats operating over an SPI interface. 1085 1086 This driver can also be built as a module. If so, the module 1087 will be called max31722. 1088 1089config SENSORS_MAX31730 1090 tristate "MAX31730 temperature sensor" 1091 depends on I2C 1092 help 1093 Support for the Maxim Integrated MAX31730 3-Channel Remote 1094 Temperature Sensor. 1095 1096 This driver can also be built as a module. If so, the module 1097 will be called max31730. 1098 1099config SENSORS_MAX31760 1100 tristate "MAX31760 fan speed controller" 1101 depends on I2C 1102 select REGMAP_I2C 1103 help 1104 Support for the Analog Devices MAX31760 Precision Fan-Speed 1105 Controller. MAX31760 integrates temperature sensing along with 1106 precision PWM fan control. 1107 1108 This driver can also be built as a module. If so, the module 1109 will be called max31760. 1110 1111config MAX31827 1112 tristate "MAX31827 low-power temperature switch and similar devices" 1113 depends on I2C 1114 select REGMAP_I2C 1115 help 1116 If you say yes here you get support for MAX31827, MAX31828 and 1117 MAX31829 low-power temperature switches and sensors connected with I2C. 1118 1119 This driver can also be built as a module. If so, the module 1120 will be called max31827. 1121 1122config SENSORS_MAX6620 1123 tristate "Maxim MAX6620 fan controller" 1124 depends on I2C 1125 help 1126 If you say yes here you get support for the MAX6620 1127 fan controller. 1128 1129 This driver can also be built as a module. If so, the module 1130 will be called max6620. 1131 1132config SENSORS_MAX6621 1133 tristate "Maxim MAX6621 sensor chip" 1134 depends on I2C 1135 select REGMAP_I2C 1136 help 1137 If you say yes here you get support for MAX6621 sensor chip. 1138 MAX6621 is a PECI-to-I2C translator provides an efficient, 1139 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1140 It allows reading the temperature from the PECI-compliant 1141 host directly from up to four PECI-enabled CPUs. 1142 1143 This driver can also be built as a module. If so, the module 1144 will be called max6621. 1145 1146config SENSORS_MAX6639 1147 tristate "Maxim MAX6639 sensor chip" 1148 depends on I2C 1149 help 1150 If you say yes here you get support for the MAX6639 1151 sensor chips. 1152 1153 This driver can also be built as a module. If so, the module 1154 will be called max6639. 1155 1156config SENSORS_MAX6642 1157 tristate "Maxim MAX6642 sensor chip" 1158 depends on I2C 1159 depends on SENSORS_LM90=n 1160 help 1161 If you say yes here you get support for MAX6642 sensor chip. 1162 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor 1163 with Overtemperature Alarm from Maxim. 1164 1165 This driver can also be built as a module. If so, the module 1166 will be called max6642. 1167 1168config SENSORS_MAX6650 1169 tristate "Maxim MAX6650 sensor chip" 1170 depends on I2C 1171 depends on THERMAL || THERMAL=n 1172 help 1173 If you say yes here you get support for the MAX6650 / MAX6651 1174 sensor chips. 1175 1176 This driver can also be built as a module. If so, the module 1177 will be called max6650. 1178 1179config SENSORS_MAX6697 1180 tristate "Maxim MAX6697 and compatibles" 1181 depends on I2C 1182 help 1183 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1184 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1185 temperature sensor chips. 1186 1187 This driver can also be built as a module. If so, the module 1188 will be called max6697. 1189 1190config SENSORS_MAX31790 1191 tristate "Maxim MAX31790 sensor chip" 1192 depends on I2C 1193 help 1194 If you say yes here you get support for 6-Channel PWM-Output 1195 Fan RPM Controller. 1196 1197 This driver can also be built as a module. If so, the module 1198 will be called max31790. 1199 1200config SENSORS_MC34VR500 1201 tristate "NXP MC34VR500 hardware monitoring driver" 1202 depends on I2C 1203 help 1204 If you say yes here you get support for the temperature and input 1205 voltage sensors of the NXP MC34VR500. 1206 1207config SENSORS_MCP3021 1208 tristate "Microchip MCP3021 and compatibles" 1209 depends on I2C 1210 help 1211 If you say yes here you get support for MCP3021 and MCP3221. 1212 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1213 with 12-bit resolution. 1214 1215 This driver can also be built as a module. If so, the module 1216 will be called mcp3021. 1217 1218config SENSORS_MLXREG_FAN 1219 tristate "Mellanox FAN driver" 1220 depends on MELLANOX_PLATFORM 1221 imply THERMAL 1222 select REGMAP 1223 help 1224 This option enables support for the FAN control on the Mellanox 1225 Ethernet and InfiniBand switches. The driver can be activated by the 1226 platform device add call. Say Y to enable these. To compile this 1227 driver as a module, choose 'M' here: the module will be called 1228 mlxreg-fan. 1229 1230config SENSORS_TC654 1231 tristate "Microchip TC654/TC655 and compatibles" 1232 depends on I2C 1233 help 1234 If you say yes here you get support for TC654 and TC655. 1235 The TC654 and TC655 are PWM mode fan speed controllers with 1236 FanSense technology for use with brushless DC fans. 1237 1238 This driver can also be built as a module. If so, the module 1239 will be called tc654. 1240 1241config SENSORS_TPS23861 1242 tristate "Texas Instruments TPS23861 PoE PSE" 1243 depends on I2C 1244 select REGMAP_I2C 1245 help 1246 If you say yes here you get support for Texas Instruments 1247 TPS23861 802.3at PoE PSE chips. 1248 1249 This driver can also be built as a module. If so, the module 1250 will be called tps23861. 1251 1252config SENSORS_MENF21BMC_HWMON 1253 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1254 depends on MFD_MENF21BMC 1255 help 1256 Say Y here to include support for the MEN 14F021P00 BMC 1257 hardware monitoring. 1258 1259 This driver can also be built as a module. If so the module 1260 will be called menf21bmc_hwmon. 1261 1262config SENSORS_MR75203 1263 tristate "Moortec Semiconductor MR75203 PVT Controller" 1264 select REGMAP_MMIO 1265 help 1266 If you say yes here you get support for Moortec MR75203 1267 PVT controller. 1268 1269 This driver can also be built as a module. If so, the module 1270 will be called mr75203. 1271 1272config SENSORS_ADCXX 1273 tristate "National Semiconductor ADCxxxSxxx" 1274 depends on SPI_MASTER 1275 help 1276 If you say yes here you get support for the National Semiconductor 1277 ADC<bb><c>S<sss> chip family, where 1278 * bb is the resolution in number of bits (8, 10, 12) 1279 * c is the number of channels (1, 2, 4, 8) 1280 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1281 kSPS and 101 for 1 MSPS) 1282 1283 Examples : ADC081S101, ADC124S501, ... 1284 1285 This driver can also be built as a module. If so, the module 1286 will be called adcxx. 1287 1288config SENSORS_LM63 1289 tristate "National Semiconductor LM63 and compatibles" 1290 depends on I2C 1291 help 1292 If you say yes here you get support for the National 1293 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1294 sensors with integrated fan control. Such chips are found 1295 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1296 others. 1297 1298 This driver can also be built as a module. If so, the module 1299 will be called lm63. 1300 1301config SENSORS_LM70 1302 tristate "National Semiconductor LM70 and compatibles" 1303 depends on SPI_MASTER 1304 help 1305 If you say yes here you get support for the National Semiconductor 1306 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1307 TMP125 digital temperature sensor chips. 1308 1309 This driver can also be built as a module. If so, the module 1310 will be called lm70. 1311 1312config SENSORS_LM73 1313 tristate "National Semiconductor LM73" 1314 depends on I2C 1315 help 1316 If you say yes here you get support for National Semiconductor LM73 1317 sensor chips. 1318 This driver can also be built as a module. If so, the module 1319 will be called lm73. 1320 1321config SENSORS_LM75 1322 tristate "National Semiconductor LM75 and compatibles" 1323 depends on I2C 1324 select REGMAP_I2C 1325 help 1326 If you say yes here you get support for one common type of 1327 temperature sensor chip, with models including: 1328 1329 - Analog Devices ADT75 1330 - Atmel (now Microchip) AT30TS74 1331 - Dallas Semiconductor DS75, DS1775 and DS7505 1332 - Global Mixed-mode Technology (GMT) G751 1333 - Maxim MAX6625 and MAX6626 1334 - Microchip MCP980x 1335 - National Semiconductor LM75, LM75A 1336 - NXP's LM75A 1337 - ST Microelectronics STDS75 1338 - ST Microelectronics STLM75 1339 - TelCom (now Microchip) TCN75 1340 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1341 TMP175, TMP275 1342 1343 This driver supports driver model based binding through board 1344 specific I2C device tables. 1345 1346 It also supports the "legacy" style of driver binding. To use 1347 that with some chips which don't replicate LM75 quirks exactly, 1348 you may need the "force" module parameter. 1349 1350 This driver can also be built as a module. If so, the module 1351 will be called lm75. 1352 1353config SENSORS_LM77 1354 tristate "National Semiconductor LM77" 1355 depends on I2C 1356 help 1357 If you say yes here you get support for National Semiconductor LM77 1358 sensor chips. 1359 1360 This driver can also be built as a module. If so, the module 1361 will be called lm77. 1362 1363config SENSORS_LM78 1364 tristate "National Semiconductor LM78 and compatibles" 1365 depends on I2C 1366 select HWMON_VID 1367 help 1368 If you say yes here you get support for National Semiconductor LM78, 1369 LM78-J and LM79. 1370 1371 This driver can also be built as a module. If so, the module 1372 will be called lm78. 1373 1374config SENSORS_LM80 1375 tristate "National Semiconductor LM80 and LM96080" 1376 depends on I2C 1377 help 1378 If you say yes here you get support for National Semiconductor 1379 LM80 and LM96080 sensor chips. 1380 1381 This driver can also be built as a module. If so, the module 1382 will be called lm80. 1383 1384config SENSORS_LM83 1385 tristate "National Semiconductor LM83 and compatibles" 1386 depends on I2C 1387 select REGMAP 1388 help 1389 If you say yes here you get support for National Semiconductor 1390 LM82 and LM83 sensor chips. 1391 1392 This driver can also be built as a module. If so, the module 1393 will be called lm83. 1394 1395config SENSORS_LM85 1396 tristate "National Semiconductor LM85 and compatibles" 1397 depends on I2C 1398 select HWMON_VID 1399 help 1400 If you say yes here you get support for National Semiconductor LM85 1401 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1402 EMC6D101, EMC6D102, and EMC6D103. 1403 1404 This driver can also be built as a module. If so, the module 1405 will be called lm85. 1406 1407config SENSORS_LM87 1408 tristate "National Semiconductor LM87 and compatibles" 1409 depends on I2C 1410 select HWMON_VID 1411 help 1412 If you say yes here you get support for National Semiconductor LM87 1413 and Analog Devices ADM1024 sensor chips. 1414 1415 This driver can also be built as a module. If so, the module 1416 will be called lm87. 1417 1418config SENSORS_LM90 1419 tristate "National Semiconductor LM90 and compatibles" 1420 depends on I2C 1421 help 1422 If you say yes here you get support for National Semiconductor LM84, 1423 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1424 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1425 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1426 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1427 MAX6696, 1428 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1429 Winbond/Nuvoton W83L771W/G/AWG/ASG, 1430 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1431 sensor chips. 1432 1433 This driver can also be built as a module. If so, the module 1434 will be called lm90. 1435 1436config SENSORS_LM92 1437 tristate "National Semiconductor LM92 and compatibles" 1438 depends on I2C 1439 help 1440 If you say yes here you get support for National Semiconductor LM92 1441 and Maxim MAX6635 sensor chips. 1442 1443 This driver can also be built as a module. If so, the module 1444 will be called lm92. 1445 1446config SENSORS_LM93 1447 tristate "National Semiconductor LM93 and compatibles" 1448 depends on I2C 1449 select HWMON_VID 1450 help 1451 If you say yes here you get support for National Semiconductor LM93, 1452 LM94, and compatible sensor chips. 1453 1454 This driver can also be built as a module. If so, the module 1455 will be called lm93. 1456 1457config SENSORS_LM95234 1458 tristate "National Semiconductor LM95234 and compatibles" 1459 depends on I2C 1460 help 1461 If you say yes here you get support for the LM95233 and LM95234 1462 temperature sensor chips. 1463 1464 This driver can also be built as a module. If so, the module 1465 will be called lm95234. 1466 1467config SENSORS_LM95241 1468 tristate "National Semiconductor LM95241 and compatibles" 1469 depends on I2C 1470 help 1471 If you say yes here you get support for LM95231 and LM95241 sensor 1472 chips. 1473 1474 This driver can also be built as a module. If so, the module 1475 will be called lm95241. 1476 1477config SENSORS_LM95245 1478 tristate "National Semiconductor LM95245 and compatibles" 1479 depends on I2C 1480 select REGMAP_I2C 1481 help 1482 If you say yes here you get support for LM95235 and LM95245 1483 temperature sensor chips. 1484 1485 This driver can also be built as a module. If so, the module 1486 will be called lm95245. 1487 1488config SENSORS_PC87360 1489 tristate "National Semiconductor PC87360 family" 1490 depends on !PPC 1491 select HWMON_VID 1492 help 1493 If you say yes here you get access to the hardware monitoring 1494 functions of the National Semiconductor PC8736x Super-I/O chips. 1495 The PC87360, PC87363 and PC87364 only have fan monitoring and 1496 control. The PC87365 and PC87366 additionally have voltage and 1497 temperature monitoring. 1498 1499 This driver can also be built as a module. If so, the module 1500 will be called pc87360. 1501 1502config SENSORS_PC87427 1503 tristate "National Semiconductor PC87427" 1504 depends on !PPC 1505 help 1506 If you say yes here you get access to the hardware monitoring 1507 functions of the National Semiconductor PC87427 Super-I/O chip. 1508 The chip has two distinct logical devices, one for fan speed 1509 monitoring and control, and one for voltage and temperature 1510 monitoring. Fan speed monitoring and control are supported, as 1511 well as temperature monitoring. Voltages aren't supported yet. 1512 1513 This driver can also be built as a module. If so, the module 1514 will be called pc87427. 1515 1516config SENSORS_NTC_THERMISTOR 1517 tristate "NTC thermistor support" 1518 depends on IIO 1519 depends on THERMAL || !THERMAL_OF 1520 help 1521 This driver supports NTC thermistors sensor reading and its 1522 interpretation. The driver can also monitor the temperature and 1523 send notifications about the temperature. 1524 1525 Currently, this driver supports 1526 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1527 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1528 B57891S0103 from EPCOS. 1529 1530 This driver can also be built as a module. If so, the module 1531 will be called ntc-thermistor. 1532 1533config SENSORS_NCT6683 1534 tristate "Nuvoton NCT6683D" 1535 depends on !PPC 1536 help 1537 If you say yes here you get support for the hardware monitoring 1538 functionality of the Nuvoton NCT6683D eSIO chip. 1539 1540 This driver can also be built as a module. If so, the module 1541 will be called nct6683. 1542 1543config SENSORS_NCT6775_CORE 1544 tristate 1545 select REGMAP 1546 help 1547 This module contains common code shared by the platform and 1548 i2c versions of the nct6775 driver; it is not useful on its 1549 own. 1550 1551 If built as a module, the module will be called 1552 nct6775-core. 1553 1554config SENSORS_NCT6775 1555 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1556 depends on !PPC 1557 depends on ACPI || ACPI=n 1558 select HWMON_VID 1559 select SENSORS_NCT6775_CORE 1560 help 1561 If you say yes here you get support for the hardware monitoring 1562 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1563 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1564 Super-I/O chips. This driver replaces the w83627ehf driver for 1565 NCT6775F and NCT6776F. 1566 1567 This driver can also be built as a module. If so, the module 1568 will be called nct6775. 1569 1570config SENSORS_NCT6775_I2C 1571 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1572 depends on I2C 1573 select REGMAP_I2C 1574 select SENSORS_NCT6775_CORE 1575 help 1576 If you say yes here you get support for the hardware monitoring 1577 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1578 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1579 Super-I/O chips via their I2C interface. 1580 1581 If you're not building a kernel for a BMC, this is probably 1582 not the driver you want (see CONFIG_SENSORS_NCT6775). 1583 1584 This driver can also be built as a module. If so, the module 1585 will be called nct6775-i2c. 1586 1587config SENSORS_NCT7802 1588 tristate "Nuvoton NCT7802Y" 1589 depends on I2C 1590 select REGMAP_I2C 1591 help 1592 If you say yes here you get support for the Nuvoton NCT7802Y 1593 hardware monitoring chip. 1594 1595 This driver can also be built as a module. If so, the module 1596 will be called nct7802. 1597 1598config SENSORS_NCT7904 1599 tristate "Nuvoton NCT7904" 1600 depends on I2C && WATCHDOG 1601 select WATCHDOG_CORE 1602 help 1603 If you say yes here you get support for the Nuvoton NCT7904 1604 hardware monitoring chip, including manual fan speed control 1605 and support for the integrated watchdog. 1606 1607 This driver can also be built as a module. If so, the module 1608 will be called nct7904. 1609 1610config SENSORS_NPCM7XX 1611 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1612 imply THERMAL 1613 help 1614 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1615 and Fan controllers. 1616 1617 This driver can also be built as a module. If so, the module 1618 will be called npcm750-pwm-fan. 1619 1620config SENSORS_NSA320 1621 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1622 depends on GPIOLIB && OF 1623 depends on MACH_KIRKWOOD || COMPILE_TEST 1624 help 1625 If you say yes here you get support for hardware monitoring 1626 for the ZyXEL NSA320 Media Server and other compatible devices 1627 (probably the NSA325 and some NSA310 variants). 1628 1629 The sensor data is taken from a Holtek HT46R065 microcontroller 1630 connected to GPIO lines. 1631 1632 This driver can also be built as a module. If so, the module 1633 will be called nsa320-hwmon. 1634 1635config SENSORS_NZXT_KRAKEN2 1636 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1637 depends on USB_HID 1638 help 1639 If you say yes here you get support for hardware monitoring for the 1640 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1641 1642 This driver can also be built as a module. If so, the module 1643 will be called nzxt-kraken2. 1644 1645config SENSORS_NZXT_SMART2 1646 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1647 depends on USB_HID 1648 help 1649 If you say yes here you get support for hardware monitoring for the 1650 NZXT RGB & Fan Controller/Smart Device v2. 1651 1652 This driver can also be built as a module. If so, the module 1653 will be called nzxt-smart2. 1654 1655source "drivers/hwmon/occ/Kconfig" 1656 1657config SENSORS_OXP 1658 tristate "OneXPlayer EC fan control" 1659 depends on ACPI 1660 depends on X86 1661 help 1662 If you say yes here you get support for fan readings and control over 1663 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant 1664 boards are supported. 1665 1666 Can also be built as a module. In that case it will be called oxp-sensors. 1667 1668config SENSORS_PCF8591 1669 tristate "Philips PCF8591 ADC/DAC" 1670 depends on I2C 1671 help 1672 If you say yes here you get support for Philips PCF8591 4-channel 1673 ADC, 1-channel DAC chips. 1674 1675 This driver can also be built as a module. If so, the module 1676 will be called pcf8591. 1677 1678 These devices are hard to detect and rarely found on mainstream 1679 hardware. If unsure, say N. 1680 1681source "drivers/hwmon/peci/Kconfig" 1682 1683source "drivers/hwmon/pmbus/Kconfig" 1684 1685config SENSORS_PWM_FAN 1686 tristate "PWM fan" 1687 depends on (PWM && OF) || COMPILE_TEST 1688 depends on THERMAL || THERMAL=n 1689 help 1690 If you say yes here you get support for fans connected to PWM lines. 1691 The driver uses the generic PWM interface, thus it will work on a 1692 variety of SoCs. 1693 1694 This driver can also be built as a module. If so, the module 1695 will be called pwm-fan. 1696 1697config SENSORS_RASPBERRYPI_HWMON 1698 tristate "Raspberry Pi voltage monitor" 1699 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1700 help 1701 If you say yes here you get support for voltage sensor on the 1702 Raspberry Pi. 1703 1704 This driver can also be built as a module. If so, the module 1705 will be called raspberrypi-hwmon. 1706 1707config SENSORS_SL28CPLD 1708 tristate "Kontron sl28cpld hardware monitoring driver" 1709 depends on MFD_SL28CPLD || COMPILE_TEST 1710 help 1711 If you say yes here you get support for the fan supervisor of the 1712 sl28cpld board management controller. 1713 1714 This driver can also be built as a module. If so, the module 1715 will be called sl28cpld-hwmon. 1716 1717config SENSORS_SBTSI 1718 tristate "Emulated SB-TSI temperature sensor" 1719 depends on I2C 1720 help 1721 If you say yes here you get support for emulated temperature 1722 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1723 1724 This driver can also be built as a module. If so, the module will 1725 be called sbtsi_temp. 1726 1727config SENSORS_SBRMI 1728 tristate "Emulated SB-RMI sensor" 1729 depends on I2C 1730 help 1731 If you say yes here you get support for emulated RMI 1732 sensors on AMD SoCs with APML interface connected to a BMC device. 1733 1734 This driver can also be built as a module. If so, the module will 1735 be called sbrmi. 1736 1737config SENSORS_SHT15 1738 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1739 depends on GPIOLIB || COMPILE_TEST 1740 select BITREVERSE 1741 help 1742 If you say yes here you get support for the Sensiron SHT10, SHT11, 1743 SHT15, SHT71, SHT75 humidity and temperature sensors. 1744 1745 This driver can also be built as a module. If so, the module 1746 will be called sht15. 1747 1748config SENSORS_SHT21 1749 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1750 depends on I2C 1751 help 1752 If you say yes here you get support for the Sensiron SHT21, SHT25 1753 humidity and temperature sensors. 1754 1755 This driver can also be built as a module. If so, the module 1756 will be called sht21. 1757 1758config SENSORS_SHT3x 1759 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1760 depends on I2C 1761 select CRC8 1762 help 1763 If you say yes here you get support for the Sensiron SHT30 and SHT31 1764 humidity and temperature sensors. 1765 1766 This driver can also be built as a module. If so, the module 1767 will be called sht3x. 1768 1769config SENSORS_SHT4x 1770 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1771 depends on I2C 1772 select CRC8 1773 help 1774 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1775 SHT45 humidity and temperature sensors. 1776 1777 This driver can also be built as a module. If so, the module 1778 will be called sht4x. 1779 1780config SENSORS_SHTC1 1781 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1782 depends on I2C 1783 help 1784 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1785 and SHTC3 humidity and temperature sensors. 1786 1787 This driver can also be built as a module. If so, the module 1788 will be called shtc1. 1789 1790config SENSORS_SIS5595 1791 tristate "Silicon Integrated Systems Corp. SiS5595" 1792 depends on PCI 1793 help 1794 If you say yes here you get support for the integrated sensors in 1795 SiS5595 South Bridges. 1796 1797 This driver can also be built as a module. If so, the module 1798 will be called sis5595. 1799 1800config SENSORS_SY7636A 1801 tristate "Silergy SY7636A" 1802 depends on MFD_SY7636A 1803 help 1804 If you say yes here you get support for the thermistor readout of 1805 the Silergy SY7636A PMIC. 1806 1807 This driver can also be built as a module. If so, the module 1808 will be called sy7636a-hwmon. 1809 1810config SENSORS_DME1737 1811 tristate "SMSC DME1737, SCH311x and compatibles" 1812 depends on I2C && !PPC 1813 select HWMON_VID 1814 help 1815 If you say yes here you get support for the hardware monitoring 1816 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1817 Asus A8000 Super-I/O chips. 1818 1819 This driver can also be built as a module. If so, the module 1820 will be called dme1737. 1821 1822config SENSORS_EMC1403 1823 tristate "SMSC EMC1403/23 thermal sensor" 1824 depends on I2C 1825 select REGMAP_I2C 1826 help 1827 If you say yes here you get support for the SMSC EMC1403/23 1828 temperature monitoring chip. 1829 1830 Threshold values can be configured using sysfs. 1831 Data from the different diodes are accessible via sysfs. 1832 1833config SENSORS_EMC2103 1834 tristate "SMSC EMC2103" 1835 depends on I2C 1836 help 1837 If you say yes here you get support for the temperature 1838 and fan sensors of the SMSC EMC2103 chips. 1839 1840 This driver can also be built as a module. If so, the module 1841 will be called emc2103. 1842 1843config SENSORS_EMC2305 1844 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 1845 depends on I2C 1846 imply THERMAL 1847 help 1848 If you say yes here you get support for the Microchip EMC2305 1849 fan controller chips. 1850 The Microchip EMC2305 is a fan controller for up to 5 fans. 1851 Fan rotation speeds are reported in RPM. 1852 1853 This driver can also be built as a module. If so, the module 1854 will be called emc2305. 1855 1856config SENSORS_EMC6W201 1857 tristate "SMSC EMC6W201" 1858 depends on I2C 1859 help 1860 If you say yes here you get support for the SMSC EMC6W201 1861 hardware monitoring chip. 1862 1863 This driver can also be built as a module. If so, the module 1864 will be called emc6w201. 1865 1866config SENSORS_SMSC47M1 1867 tristate "SMSC LPC47M10x and compatibles" 1868 depends on !PPC 1869 help 1870 If you say yes here you get support for the integrated fan 1871 monitoring and control capabilities of the SMSC LPC47B27x, 1872 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 1873 LPC47M192, LPC47M292 and LPC47M997 chips. 1874 1875 The temperature and voltage sensor features of the LPC47M15x, 1876 LPC47M192, LPC47M292 and LPC47M997 are supported by another 1877 driver, select also "SMSC LPC47M192 and compatibles" below for 1878 those. 1879 1880 This driver can also be built as a module. If so, the module 1881 will be called smsc47m1. 1882 1883config SENSORS_SMSC47M192 1884 tristate "SMSC LPC47M192 and compatibles" 1885 depends on I2C 1886 select HWMON_VID 1887 help 1888 If you say yes here you get support for the temperature and 1889 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 1890 and LPC47M997 chips. 1891 1892 The fan monitoring and control capabilities of these chips 1893 are supported by another driver, select 1894 "SMSC LPC47M10x and compatibles" above. You need both drivers 1895 if you want fan control and voltage/temperature sensor support. 1896 1897 This driver can also be built as a module. If so, the module 1898 will be called smsc47m192. 1899 1900config SENSORS_SMSC47B397 1901 tristate "SMSC LPC47B397-NC" 1902 depends on !PPC 1903 help 1904 If you say yes here you get support for the SMSC LPC47B397-NC 1905 sensor chip. 1906 1907 This driver can also be built as a module. If so, the module 1908 will be called smsc47b397. 1909 1910config SENSORS_SCH56XX_COMMON 1911 tristate 1912 1913config SENSORS_SCH5627 1914 tristate "SMSC SCH5627" 1915 depends on !PPC && WATCHDOG 1916 select SENSORS_SCH56XX_COMMON 1917 select WATCHDOG_CORE 1918 help 1919 If you say yes here you get support for the hardware monitoring 1920 features of the SMSC SCH5627 Super-I/O chip including support for 1921 the integrated watchdog. 1922 1923 This driver can also be built as a module. If so, the module 1924 will be called sch5627. 1925 1926config SENSORS_SCH5636 1927 tristate "SMSC SCH5636" 1928 depends on !PPC && WATCHDOG 1929 select SENSORS_SCH56XX_COMMON 1930 select WATCHDOG_CORE 1931 help 1932 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 1933 hardware monitoring solutions, allowing motherboard manufacturers to 1934 create their own custom hwmon solution based upon the SCH5636. 1935 1936 Currently this driver only supports the Fujitsu Theseus SCH5636 based 1937 hwmon solution. Say yes here if you want support for the Fujitsu 1938 Theseus' hardware monitoring features including support for the 1939 integrated watchdog. 1940 1941 This driver can also be built as a module. If so, the module 1942 will be called sch5636. 1943 1944config SENSORS_STTS751 1945 tristate "ST Microelectronics STTS751" 1946 depends on I2C 1947 help 1948 If you say yes here you get support for STTS751 1949 temperature sensor chips. 1950 1951 This driver can also be built as a module. If so, the module 1952 will be called stts751. 1953 1954config SENSORS_SFCTEMP 1955 tristate "Starfive JH71x0 temperature sensor" 1956 depends on ARCH_STARFIVE || COMPILE_TEST 1957 help 1958 If you say yes here you get support for temperature sensor 1959 on the Starfive JH71x0 SoCs. 1960 1961 This driver can also be built as a module. If so, the module 1962 will be called sfctemp. 1963 1964config SENSORS_ADC128D818 1965 tristate "Texas Instruments ADC128D818" 1966 depends on I2C 1967 help 1968 If you say yes here you get support for the Texas Instruments 1969 ADC128D818 System Monitor with Temperature Sensor chip. 1970 1971 This driver can also be built as a module. If so, the module 1972 will be called adc128d818. 1973 1974config SENSORS_ADS7828 1975 tristate "Texas Instruments ADS7828 and compatibles" 1976 depends on I2C 1977 select REGMAP_I2C 1978 help 1979 If you say yes here you get support for Texas Instruments ADS7828 and 1980 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 1981 it is 8-bit on ADS7830. 1982 1983 This driver can also be built as a module. If so, the module 1984 will be called ads7828. 1985 1986config SENSORS_ADS7871 1987 tristate "Texas Instruments ADS7871 A/D converter" 1988 depends on SPI 1989 help 1990 If you say yes here you get support for TI ADS7871 & ADS7870 1991 1992 This driver can also be built as a module. If so, the module 1993 will be called ads7871. 1994 1995config SENSORS_AMC6821 1996 tristate "Texas Instruments AMC6821" 1997 depends on I2C 1998 help 1999 If you say yes here you get support for the Texas Instruments 2000 AMC6821 hardware monitoring chips. 2001 2002 This driver can also be built as a module. If so, the module 2003 will be called amc6821. 2004 2005config SENSORS_INA209 2006 tristate "TI / Burr Brown INA209" 2007 depends on I2C 2008 help 2009 If you say yes here you get support for the TI / Burr Brown INA209 2010 voltage / current / power monitor I2C interface. 2011 2012 This driver can also be built as a module. If so, the module will 2013 be called ina209. 2014 2015config SENSORS_INA2XX 2016 tristate "Texas Instruments INA219 and compatibles" 2017 depends on I2C 2018 select REGMAP_I2C 2019 help 2020 If you say yes here you get support for INA219, INA220, INA226, 2021 INA230, and INA231 power monitor chips. 2022 2023 The INA2xx driver is configured for the default configuration of 2024 the part as described in the datasheet. 2025 Default value for Rshunt is 10 mOhms. 2026 This driver can also be built as a module. If so, the module 2027 will be called ina2xx. 2028 2029config SENSORS_INA238 2030 tristate "Texas Instruments INA238" 2031 depends on I2C 2032 select REGMAP_I2C 2033 help 2034 If you say yes here you get support for the INA238 power monitor 2035 chip. This driver supports voltage, current, power and temperature 2036 measurements as well as alarm configuration. 2037 2038 This driver can also be built as a module. If so, the module 2039 will be called ina238. 2040 2041config SENSORS_INA3221 2042 tristate "Texas Instruments INA3221 Triple Power Monitor" 2043 depends on I2C 2044 select REGMAP_I2C 2045 help 2046 If you say yes here you get support for the TI INA3221 Triple Power 2047 Monitor. 2048 2049 This driver can also be built as a module. If so, the module 2050 will be called ina3221. 2051 2052config SENSORS_TC74 2053 tristate "Microchip TC74" 2054 depends on I2C 2055 help 2056 If you say yes here you get support for Microchip TC74 single 2057 input temperature sensor chips. 2058 2059 This driver can also be built as a module. If so, the module 2060 will be called tc74. 2061 2062config SENSORS_THMC50 2063 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2064 depends on I2C 2065 help 2066 If you say yes here you get support for Texas Instruments THMC50 2067 sensor chips and clones: the Analog Devices ADM1022. 2068 2069 This driver can also be built as a module. If so, the module 2070 will be called thmc50. 2071 2072config SENSORS_TMP102 2073 tristate "Texas Instruments TMP102" 2074 depends on I2C 2075 select REGMAP_I2C 2076 help 2077 If you say yes here you get support for Texas Instruments TMP102 2078 sensor chips. 2079 2080 This driver can also be built as a module. If so, the module 2081 will be called tmp102. 2082 2083config SENSORS_TMP103 2084 tristate "Texas Instruments TMP103" 2085 depends on I2C 2086 select REGMAP_I2C 2087 help 2088 If you say yes here you get support for Texas Instruments TMP103 2089 sensor chips. 2090 2091 This driver can also be built as a module. If so, the module 2092 will be called tmp103. 2093 2094config SENSORS_TMP108 2095 tristate "Texas Instruments TMP108" 2096 depends on I2C 2097 select REGMAP_I2C 2098 help 2099 If you say yes here you get support for Texas Instruments TMP108 2100 sensor chips. 2101 2102 This driver can also be built as a module. If so, the module 2103 will be called tmp108. 2104 2105config SENSORS_TMP401 2106 tristate "Texas Instruments TMP401 and compatibles" 2107 depends on I2C 2108 select REGMAP 2109 help 2110 If you say yes here you get support for Texas Instruments TMP401, 2111 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2112 2113 This driver can also be built as a module. If so, the module 2114 will be called tmp401. 2115 2116config SENSORS_TMP421 2117 tristate "Texas Instruments TMP421 and compatible" 2118 depends on I2C 2119 help 2120 If you say yes here you get support for Texas Instruments TMP421, 2121 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2122 2123 This driver can also be built as a module. If so, the module 2124 will be called tmp421. 2125 2126config SENSORS_TMP464 2127 tristate "Texas Instruments TMP464 and compatible" 2128 depends on I2C 2129 select REGMAP_I2C 2130 help 2131 If you say yes here you get support for Texas Instruments TMP464 2132 and TMP468 temperature sensor chips. 2133 2134 This driver can also be built as a module. If so, the module 2135 will be called tmp464. 2136 2137config SENSORS_TMP513 2138 tristate "Texas Instruments TMP513 and compatibles" 2139 depends on I2C 2140 help 2141 If you say yes here you get support for Texas Instruments TMP512, 2142 and TMP513 temperature and power supply sensor chips. 2143 2144 This driver can also be built as a module. If so, the module 2145 will be called tmp513. 2146 2147config SENSORS_VEXPRESS 2148 tristate "Versatile Express" 2149 depends on VEXPRESS_CONFIG 2150 help 2151 This driver provides support for hardware sensors available on 2152 the ARM Ltd's Versatile Express platform. It can provide wide 2153 range of information like temperature, power, energy. 2154 2155config SENSORS_VIA_CPUTEMP 2156 tristate "VIA CPU temperature sensor" 2157 depends on X86 2158 select HWMON_VID 2159 help 2160 If you say yes here you get support for the temperature 2161 sensor inside your CPU. Supported are all known variants of 2162 the VIA C7 and Nano. 2163 2164config SENSORS_VIA686A 2165 tristate "VIA686A" 2166 depends on PCI 2167 help 2168 If you say yes here you get support for the integrated sensors in 2169 Via 686A/B South Bridges. 2170 2171 This driver can also be built as a module. If so, the module 2172 will be called via686a. 2173 2174config SENSORS_VT1211 2175 tristate "VIA VT1211" 2176 depends on !PPC 2177 select HWMON_VID 2178 help 2179 If you say yes here then you get support for hardware monitoring 2180 features of the VIA VT1211 Super-I/O chip. 2181 2182 This driver can also be built as a module. If so, the module 2183 will be called vt1211. 2184 2185config SENSORS_VT8231 2186 tristate "VIA VT8231" 2187 depends on PCI 2188 select HWMON_VID 2189 help 2190 If you say yes here then you get support for the integrated sensors 2191 in the VIA VT8231 device. 2192 2193 This driver can also be built as a module. If so, the module 2194 will be called vt8231. 2195 2196config SENSORS_W83773G 2197 tristate "Nuvoton W83773G" 2198 depends on I2C 2199 select REGMAP_I2C 2200 help 2201 If you say yes here you get support for the Nuvoton W83773G hardware 2202 monitoring chip. 2203 2204 This driver can also be built as a module. If so, the module 2205 will be called w83773g. 2206 2207config SENSORS_W83781D 2208 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2209 depends on I2C 2210 select HWMON_VID 2211 help 2212 If you say yes here you get support for the Winbond W8378x series 2213 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2214 Asus AS99127F. 2215 2216 This driver can also be built as a module. If so, the module 2217 will be called w83781d. 2218 2219config SENSORS_W83791D 2220 tristate "Winbond W83791D" 2221 depends on I2C 2222 select HWMON_VID 2223 help 2224 If you say yes here you get support for the Winbond W83791D chip. 2225 2226 This driver can also be built as a module. If so, the module 2227 will be called w83791d. 2228 2229config SENSORS_W83792D 2230 tristate "Winbond W83792D" 2231 depends on I2C 2232 help 2233 If you say yes here you get support for the Winbond W83792D chip. 2234 2235 This driver can also be built as a module. If so, the module 2236 will be called w83792d. 2237 2238config SENSORS_W83793 2239 tristate "Winbond W83793" 2240 depends on I2C 2241 select HWMON_VID 2242 help 2243 If you say yes here you get support for the Winbond W83793 2244 hardware monitoring chip, including support for the integrated 2245 watchdog. 2246 2247 This driver can also be built as a module. If so, the module 2248 will be called w83793. 2249 2250config SENSORS_W83795 2251 tristate "Winbond/Nuvoton W83795G/ADG" 2252 depends on I2C 2253 help 2254 If you say yes here you get support for the Winbond W83795G and 2255 W83795ADG hardware monitoring chip, including manual fan speed 2256 control. 2257 2258 This driver can also be built as a module. If so, the module 2259 will be called w83795. 2260 2261config SENSORS_W83795_FANCTRL 2262 bool "Include automatic fan control support" 2263 depends on SENSORS_W83795 2264 help 2265 If you say yes here, support for automatic fan speed control 2266 will be included in the driver. 2267 2268 Please also note that this option will create sysfs attribute 2269 files which may change in the future, so you shouldn't rely 2270 on them being stable. 2271 2272config SENSORS_W83L785TS 2273 tristate "Winbond W83L785TS-S" 2274 depends on I2C 2275 help 2276 If you say yes here you get support for the Winbond W83L785TS-S 2277 sensor chip, which is used on the Asus A7N8X, among other 2278 motherboards. 2279 2280 This driver can also be built as a module. If so, the module 2281 will be called w83l785ts. 2282 2283config SENSORS_W83L786NG 2284 tristate "Winbond W83L786NG, W83L786NR" 2285 depends on I2C 2286 help 2287 If you say yes here you get support for the Winbond W83L786NG 2288 and W83L786NR sensor chips. 2289 2290 This driver can also be built as a module. If so, the module 2291 will be called w83l786ng. 2292 2293config SENSORS_W83627HF 2294 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2295 depends on !PPC 2296 select HWMON_VID 2297 help 2298 If you say yes here you get support for the Winbond W836X7 series 2299 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2300 W83697HF. 2301 2302 This driver can also be built as a module. If so, the module 2303 will be called w83627hf. 2304 2305config SENSORS_W83627EHF 2306 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2307 depends on !PPC 2308 select HWMON_VID 2309 help 2310 If you say yes here you get support for the hardware 2311 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2312 2313 This driver also supports the W83627EHG, which is the lead-free 2314 version of the W83627EHF, and the W83627DHG, which is a similar 2315 chip suited for specific Intel processors that use PECI such as 2316 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2317 version of the W83627DHG (as far as hardware monitoring goes.) 2318 2319 This driver also supports Nuvoton W83667HG and W83667HG-B. 2320 2321 This driver can also be built as a module. If so, the module 2322 will be called w83627ehf. 2323 2324config SENSORS_WM831X 2325 tristate "WM831x PMICs" 2326 depends on MFD_WM831X 2327 help 2328 If you say yes here you get support for the hardware 2329 monitoring functionality of the Wolfson Microelectronics 2330 WM831x series of PMICs. 2331 2332 This driver can also be built as a module. If so, the module 2333 will be called wm831x-hwmon. 2334 2335config SENSORS_WM8350 2336 tristate "Wolfson Microelectronics WM835x" 2337 depends on MFD_WM8350 2338 help 2339 If you say yes here you get support for the hardware 2340 monitoring features of the WM835x series of PMICs. 2341 2342 This driver can also be built as a module. If so, the module 2343 will be called wm8350-hwmon. 2344 2345config SENSORS_ULTRA45 2346 tristate "Sun Ultra45 PIC16F747" 2347 depends on SPARC64 2348 help 2349 This driver provides support for the Ultra45 workstation environmental 2350 sensors. 2351 2352config SENSORS_XGENE 2353 tristate "APM X-Gene SoC hardware monitoring driver" 2354 depends on XGENE_SLIMPRO_MBOX || PCC 2355 help 2356 If you say yes here you get support for the temperature 2357 and power sensors for APM X-Gene SoC. 2358 2359config SENSORS_INTEL_M10_BMC_HWMON 2360 tristate "Intel MAX10 BMC Hardware Monitoring" 2361 depends on MFD_INTEL_M10_BMC_CORE 2362 help 2363 This driver provides support for the hardware monitoring functionality 2364 on Intel MAX10 BMC chip. 2365 2366 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2367 sensors monitor various telemetry data of different components on the 2368 card, e.g. board temperature, FPGA core temperature/voltage/current. 2369 2370if ACPI 2371 2372comment "ACPI drivers" 2373 2374config SENSORS_ACPI_POWER 2375 tristate "ACPI 4.0 power meter" 2376 help 2377 This driver exposes ACPI 4.0 power meters as hardware monitoring 2378 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2379 and a power meter. 2380 2381 To compile this driver as a module, choose M here: 2382 the module will be called acpi_power_meter. 2383 2384config SENSORS_ATK0110 2385 tristate "ASUS ATK0110" 2386 depends on X86 2387 help 2388 If you say yes here you get support for the ACPI hardware 2389 monitoring interface found in many ASUS motherboards. This 2390 driver will provide readings of fans, voltages and temperatures 2391 through the system firmware. 2392 2393 This driver can also be built as a module. If so, the module 2394 will be called asus_atk0110. 2395 2396config SENSORS_ASUS_WMI 2397 tristate "ASUS WMI X370/X470/B450/X399" 2398 depends on ACPI_WMI 2399 help 2400 If you say yes here you get support for the ACPI hardware monitoring 2401 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2402 will provide readings of fans, voltages and temperatures through the system 2403 firmware. 2404 2405 This driver can also be built as a module. If so, the module 2406 will be called asus_wmi_sensors. 2407 2408config SENSORS_ASUS_EC 2409 tristate "ASUS EC Sensors" 2410 depends on X86 2411 help 2412 If you say yes here you get support for the ACPI embedded controller 2413 hardware monitoring interface found in ASUS motherboards. The driver 2414 currently supports B550/X570 boards, although other ASUS boards might 2415 provide this monitoring interface as well. 2416 2417 This driver can also be built as a module. If so, the module 2418 will be called asus_ec_sensors. 2419 2420config SENSORS_HP_WMI 2421 tristate "HP WMI Sensors" 2422 depends on ACPI_WMI 2423 help 2424 If you say yes here you get support for the ACPI hardware monitoring 2425 interface found in HP (and some HP Compaq) business-class computers. 2426 Available sensors vary between systems. Temperature and fan speed 2427 sensors are the most common. 2428 2429 This driver can also be built as a module. If so, the module 2430 will be called hp_wmi_sensors. 2431 2432endif # ACPI 2433 2434endif # HWMON 2435