1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on (X86 && DMI) || COMPILE_TEST 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on (X86 && DMI) || COMPILE_TEST 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1021 109 tristate "Analog Devices ADM1021 and compatibles" 110 depends on I2C 111 depends on SENSORS_LM90=n 112 help 113 If you say yes here you get support for Analog Devices ADM1021 114 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, 115 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. 116 117 This driver can also be built as a module. If so, the module 118 will be called adm1021. 119 120config SENSORS_ADM1025 121 tristate "Analog Devices ADM1025 and compatibles" 122 depends on I2C 123 select HWMON_VID 124 help 125 If you say yes here you get support for Analog Devices ADM1025 126 and Philips NE1619 sensor chips. 127 128 This driver can also be built as a module. If so, the module 129 will be called adm1025. 130 131config SENSORS_ADM1026 132 tristate "Analog Devices ADM1026 and compatibles" 133 depends on I2C 134 select HWMON_VID 135 help 136 If you say yes here you get support for Analog Devices ADM1026 137 sensor chip. 138 139 This driver can also be built as a module. If so, the module 140 will be called adm1026. 141 142config SENSORS_ADM1029 143 tristate "Analog Devices ADM1029" 144 depends on I2C 145 help 146 If you say yes here you get support for Analog Devices ADM1029 147 sensor chip. 148 Very rare chip, please let us know you use it. 149 150 This driver can also be built as a module. If so, the module 151 will be called adm1029. 152 153config SENSORS_ADM1031 154 tristate "Analog Devices ADM1031 and compatibles" 155 depends on I2C 156 help 157 If you say yes here you get support for Analog Devices ADM1031 158 and ADM1030 sensor chips. 159 160 This driver can also be built as a module. If so, the module 161 will be called adm1031. 162 163config SENSORS_ADM1177 164 tristate "Analog Devices ADM1177 and compatibles" 165 depends on I2C 166 help 167 If you say yes here you get support for Analog Devices ADM1177 168 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm1177. 172 173config SENSORS_ADM9240 174 tristate "Analog Devices ADM9240 and compatibles" 175 depends on I2C 176 select HWMON_VID 177 help 178 If you say yes here you get support for Analog Devices ADM9240, 179 Dallas DS1780, National Semiconductor LM81 sensor chips. 180 181 This driver can also be built as a module. If so, the module 182 will be called adm9240. 183 184config SENSORS_ADT7X10 185 tristate 186 select REGMAP 187 help 188 This module contains common code shared by the ADT7310/ADT7320 and 189 ADT7410/ADT7420 temperature monitoring chip drivers. 190 191 If built as a module, the module will be called adt7x10. 192 193config SENSORS_ADT7310 194 tristate "Analog Devices ADT7310/ADT7320" 195 depends on SPI_MASTER 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7310 and ADT7320 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7310. 203 204config SENSORS_ADT7410 205 tristate "Analog Devices ADT7410/ADT7420" 206 depends on I2C 207 select SENSORS_ADT7X10 208 help 209 If you say yes here you get support for the Analog Devices 210 ADT7410 and ADT7420 temperature monitoring chips. 211 212 This driver can also be built as a module. If so, the module 213 will be called adt7410. 214 215config SENSORS_ADT7411 216 tristate "Analog Devices ADT7411" 217 depends on I2C 218 help 219 If you say yes here you get support for the Analog Devices 220 ADT7411 voltage and temperature monitoring chip. 221 222 This driver can also be built as a module. If so, the module 223 will be called adt7411. 224 225config SENSORS_ADT7462 226 tristate "Analog Devices ADT7462" 227 depends on I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7462 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7462. 234 235config SENSORS_ADT7470 236 tristate "Analog Devices ADT7470" 237 depends on I2C 238 help 239 If you say yes here you get support for the Analog Devices 240 ADT7470 temperature monitoring chips. 241 242 This driver can also be built as a module. If so, the module 243 will be called adt7470. 244 245config SENSORS_ADT7475 246 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 247 depends on I2C 248 select HWMON_VID 249 help 250 If you say yes here you get support for the Analog Devices 251 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 252 chips. 253 254 This driver can also be built as a module. If so, the module 255 will be called adt7475. 256 257config SENSORS_AHT10 258 tristate "Aosong AHT10, AHT20" 259 depends on I2C 260 select CRC8 261 help 262 If you say yes here, you get support for the Aosong AHT10 and AHT20 263 temperature and humidity sensors 264 265 This driver can also be built as a module. If so, the module 266 will be called aht10. 267 268config SENSORS_AQUACOMPUTER_D5NEXT 269 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 270 depends on USB_HID 271 select CRC16 272 help 273 If you say yes here you get support for sensors and fans of 274 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 275 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 276 Next sensor, where available. 277 278 This driver can also be built as a module. If so, the module 279 will be called aquacomputer_d5next. 280 281config SENSORS_AS370 282 tristate "Synaptics AS370 SoC hardware monitoring driver" 283 help 284 If you say yes here you get support for the PVT sensors of 285 the Synaptics AS370 SoC 286 287 This driver can also be built as a module. If so, the module 288 will be called as370-hwmon. 289 290 291config SENSORS_ASC7621 292 tristate "Andigilog aSC7621" 293 depends on I2C 294 help 295 If you say yes here you get support for the aSC7621 296 family of SMBus sensors chip found on most Intel X38, X48, X58, 297 945, 965 and 975 desktop boards. Currently supported chips: 298 aSC7621 299 aSC7621a 300 301 This driver can also be built as a module. If so, the module 302 will be called asc7621. 303 304config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NB 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338config SENSORS_FAM15H_POWER 339 tristate "AMD Family 15h processor power" 340 depends on X86 && PCI && CPU_SUP_AMD 341 help 342 If you say yes here you get support for processor power 343 information of your AMD family 15h CPU. 344 345 This driver can also be built as a module. If so, the module 346 will be called fam15h_power. 347 348config SENSORS_APPLESMC 349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 350 depends on INPUT && X86 351 select NEW_LEDS 352 select LEDS_CLASS 353 help 354 This driver provides support for the Apple System Management 355 Controller, which provides an accelerometer (Apple Sudden Motion 356 Sensor), light sensors, temperature sensors, keyboard backlight 357 control and fan control. 358 359 Only Intel-based Apple's computers are supported (MacBook Pro, 360 MacBook, MacMini). 361 362 Data from the different sensors, keyboard backlight control and fan 363 control are accessible via sysfs. 364 365 This driver also provides an absolute input class device, allowing 366 the laptop to act as a pinball machine-esque joystick. 367 368 Say Y here if you have an applicable laptop and want to experience 369 the awesome power of applesmc. 370 371config SENSORS_ARM_SCMI 372 tristate "ARM SCMI Sensors" 373 depends on ARM_SCMI_PROTOCOL 374 depends on THERMAL || !THERMAL_OF 375 help 376 This driver provides support for temperature, voltage, current 377 and power sensors available on SCMI based platforms. The actual 378 number and type of sensors exported depend on the platform. 379 380 This driver can also be built as a module. If so, the module 381 will be called scmi-hwmon. 382 383config SENSORS_ARM_SCPI 384 tristate "ARM SCPI Sensors" 385 depends on ARM_SCPI_PROTOCOL 386 depends on THERMAL || !THERMAL_OF 387 help 388 This driver provides support for temperature, voltage, current 389 and power sensors available on ARM Ltd's SCP based platforms. The 390 actual number and type of sensors exported depend on the platform. 391 392config SENSORS_ASB100 393 tristate "Asus ASB100 Bach" 394 depends on (X86 || COMPILE_TEST) && I2C 395 select HWMON_VID 396 help 397 If you say yes here you get support for the ASB100 Bach sensor 398 chip found on some Asus mainboards. 399 400 This driver can also be built as a module. If so, the module 401 will be called asb100. 402 403config SENSORS_ASPEED 404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 405 depends on ARCH_ASPEED || COMPILE_TEST 406 depends on THERMAL || THERMAL=n 407 select REGMAP 408 help 409 This driver provides support for ASPEED AST2400/AST2500 PWM 410 and Fan Tacho controllers. 411 412 This driver can also be built as a module. If so, the module 413 will be called aspeed_pwm_tacho. 414 415config SENSORS_ATXP1 416 tristate "Attansic ATXP1 VID controller" 417 depends on I2C 418 select HWMON_VID 419 help 420 If you say yes here you get support for the Attansic ATXP1 VID 421 controller. 422 423 If your board have such a chip, you are able to control your CPU 424 core and other voltages. 425 426 This driver can also be built as a module. If so, the module 427 will be called atxp1. 428 429config SENSORS_BT1_PVT 430 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 431 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 432 select POLYNOMIAL 433 help 434 If you say yes here you get support for Baikal-T1 PVT sensor 435 embedded into the SoC. 436 437 This driver can also be built as a module. If so, the module will be 438 called bt1-pvt. 439 440config SENSORS_BT1_PVT_ALARMS 441 bool "Enable Baikal-T1 PVT sensor alarms" 442 depends on SENSORS_BT1_PVT 443 help 444 Baikal-T1 PVT IP-block provides threshold registers for each 445 supported sensor. But the corresponding interrupts might be 446 generated by the thresholds comparator only in synchronization with 447 a data conversion. Additionally there is only one sensor data can 448 be converted at a time. All of these makes the interface impossible 449 to be used for the hwmon alarms implementation without periodic 450 switch between the PVT sensors. By default the data conversion is 451 performed on demand from the user-space. If this config is enabled 452 the data conversion will be periodically performed and the data will be 453 saved in the internal driver cache. 454 455config SENSORS_CORSAIR_CPRO 456 tristate "Corsair Commander Pro controller" 457 depends on HID 458 help 459 If you say yes here you get support for the Corsair Commander Pro 460 controller. 461 462 This driver can also be built as a module. If so, the module 463 will be called corsair-cpro. 464 465config SENSORS_CORSAIR_PSU 466 tristate "Corsair PSU HID controller" 467 depends on HID 468 help 469 If you say yes here you get support for Corsair PSUs with a HID 470 interface. 471 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 472 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 473 by Corsair. 474 475 This driver can also be built as a module. If so, the module 476 will be called corsair-psu. 477 478config SENSORS_DRIVETEMP 479 tristate "Hard disk drives with temperature sensors" 480 depends on SCSI && ATA 481 help 482 If you say yes you get support for the temperature sensor on 483 hard disk drives. 484 485 This driver can also be built as a module. If so, the module 486 will be called drivetemp. 487 488config SENSORS_DS620 489 tristate "Dallas Semiconductor DS620" 490 depends on I2C 491 help 492 If you say yes here you get support for Dallas Semiconductor 493 DS620 sensor chip. 494 495 This driver can also be built as a module. If so, the module 496 will be called ds620. 497 498config SENSORS_DS1621 499 tristate "Dallas Semiconductor DS1621 and compatibles" 500 depends on I2C 501 help 502 If you say yes here you get support for Dallas Semiconductor/Maxim 503 Integrated DS1621 sensor chips and compatible models including: 504 505 - Dallas Semiconductor DS1625 506 - Maxim Integrated DS1631 507 - Maxim Integrated DS1721 508 - Maxim Integrated DS1731 509 510 This driver can also be built as a module. If so, the module 511 will be called ds1621. 512 513config SENSORS_DELL_SMM 514 tristate "Dell laptop SMM BIOS hwmon driver" 515 depends on ACPI_WMI 516 depends on X86 517 imply THERMAL 518 help 519 This hwmon driver adds support for reporting temperature of different 520 sensors and controls the fans on Dell laptops via System Management 521 Mode provided by Dell BIOS. 522 523 When option I8K is also enabled this driver provides legacy /proc/i8k 524 userspace interface for i8kutils package. 525 526config I8K 527 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 528 depends on SENSORS_DELL_SMM 529 depends on PROC_FS 530 help 531 This option enables the legacy /proc/i8k userspace interface of the 532 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 533 version, temperatures and allows control of fan speeds of some Dell 534 laptops. Sometimes it also reports power and hotkey status. 535 536 This interface is required to run programs from the i8kutils package. 537 538 Say Y if you intend to run userspace programs that use this interface. 539 Say N otherwise. 540 541config SENSORS_DA9052_ADC 542 tristate "Dialog DA9052/DA9053 ADC" 543 depends on PMIC_DA9052 544 help 545 Say y here to support the ADC found on Dialog Semiconductor 546 DA9052-BC and DA9053-AA/Bx PMICs. 547 548 This driver can also be built as module. If so, the module 549 will be called da9052-hwmon. 550 551config SENSORS_DA9055 552 tristate "Dialog Semiconductor DA9055 ADC" 553 depends on MFD_DA9055 554 help 555 If you say yes here you get support for ADC on the Dialog 556 Semiconductor DA9055 PMIC. 557 558 This driver can also be built as a module. If so, the module 559 will be called da9055-hwmon. 560 561config SENSORS_I5K_AMB 562 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 563 depends on PCI 564 help 565 If you say yes here you get support for FB-DIMM AMB temperature 566 monitoring chips on systems with the Intel 5000 series chipset. 567 568 This driver can also be built as a module. If so, the module 569 will be called i5k_amb. 570 571config SENSORS_SPARX5 572 tristate "Sparx5 SoC temperature sensor" 573 depends on ARCH_SPARX5 || COMPILE_TEST 574 help 575 If you say yes here you get support for temperature monitoring 576 with the Microchip Sparx5 SoC. 577 578 This driver can also be built as a module. If so, the module 579 will be called sparx5-temp. 580 581config SENSORS_F71805F 582 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 583 depends on !PPC 584 help 585 If you say yes here you get support for hardware monitoring 586 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 587 Super-I/O chips. 588 589 This driver can also be built as a module. If so, the module 590 will be called f71805f. 591 592config SENSORS_F71882FG 593 tristate "Fintek F71882FG and compatibles" 594 depends on !PPC 595 help 596 If you say yes here you get support for hardware monitoring 597 features of many Fintek Super-I/O (LPC) chips. The currently 598 supported chips are: 599 F71808E/A 600 F71858FG 601 F71862FG 602 F71863FG 603 F71869F/E/A 604 F71882FG 605 F71883FG 606 F71889FG/ED/A 607 F8000 608 F81801U 609 F81865F 610 611 This driver can also be built as a module. If so, the module 612 will be called f71882fg. 613 614config SENSORS_F75375S 615 tristate "Fintek F75375S/SP, F75373 and F75387" 616 depends on I2C 617 help 618 If you say yes here you get support for hardware monitoring 619 features of the Fintek F75375S/SP, F75373 and F75387 620 621 This driver can also be built as a module. If so, the module 622 will be called f75375s. 623 624config SENSORS_GSC 625 tristate "Gateworks System Controller ADC" 626 depends on MFD_GATEWORKS_GSC 627 help 628 Support for the Gateworks System Controller A/D converters. 629 630 To compile this driver as a module, choose M here: 631 the module will be called gsc-hwmon. 632 633config SENSORS_MC13783_ADC 634 tristate "Freescale MC13783/MC13892 ADC" 635 depends on MFD_MC13XXX 636 help 637 Support for the A/D converter on MC13783 and MC13892 PMIC. 638 639config SENSORS_FSCHMD 640 tristate "Fujitsu Siemens Computers sensor chips" 641 depends on (X86 || COMPILE_TEST) && I2C 642 help 643 If you say yes here you get support for the following Fujitsu 644 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 645 Heimdall, Heracles, Hades and Syleus including support for the 646 integrated watchdog. 647 648 This is a merged driver for FSC sensor chips replacing the fscpos, 649 fscscy and fscher drivers and adding support for several other FSC 650 sensor chips. 651 652 This driver can also be built as a module. If so, the module 653 will be called fschmd. 654 655config SENSORS_FTSTEUTATES 656 tristate "Fujitsu Technology Solutions sensor chip Teutates" 657 depends on I2C && WATCHDOG 658 select WATCHDOG_CORE 659 help 660 If you say yes here you get support for the Fujitsu Technology 661 Solutions (FTS) sensor chip "Teutates" including support for 662 the integrated watchdog. 663 664 This driver can also be built as a module. If so, the module 665 will be called ftsteutates. 666 667config SENSORS_GIGABYTE_WATERFORCE 668 tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" 669 depends on USB_HID 670 help 671 If you say yes here you get support for hardware monitoring for the 672 Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. 673 674 This driver can also be built as a module. If so, the module 675 will be called gigabyte_waterforce. 676 677config SENSORS_GL518SM 678 tristate "Genesys Logic GL518SM" 679 depends on I2C 680 help 681 If you say yes here you get support for Genesys Logic GL518SM 682 sensor chips. 683 684 This driver can also be built as a module. If so, the module 685 will be called gl518sm. 686 687config SENSORS_GL520SM 688 tristate "Genesys Logic GL520SM" 689 depends on I2C 690 select HWMON_VID 691 help 692 If you say yes here you get support for Genesys Logic GL520SM 693 sensor chips. 694 695 This driver can also be built as a module. If so, the module 696 will be called gl520sm. 697 698config SENSORS_G760A 699 tristate "GMT G760A" 700 depends on I2C 701 help 702 If you say yes here you get support for Global Mixed-mode 703 Technology Inc G760A fan speed PWM controller chips. 704 705 This driver can also be built as a module. If so, the module 706 will be called g760a. 707 708config SENSORS_G762 709 tristate "GMT G762 and G763" 710 depends on I2C 711 help 712 If you say yes here you get support for Global Mixed-mode 713 Technology Inc G762 and G763 fan speed PWM controller chips. 714 715 This driver can also be built as a module. If so, the module 716 will be called g762. 717 718config SENSORS_GPIO_FAN 719 tristate "GPIO fan" 720 depends on OF_GPIO 721 depends on GPIOLIB || COMPILE_TEST 722 depends on THERMAL || THERMAL=n 723 help 724 If you say yes here you get support for fans connected to GPIO lines. 725 726 This driver can also be built as a module. If so, the module 727 will be called gpio-fan. 728 729config SENSORS_GXP_FAN_CTRL 730 tristate "HPE GXP fan controller" 731 depends on ARCH_HPE_GXP || COMPILE_TEST 732 help 733 If you say yes here you get support for GXP fan control functionality. 734 735 The GXP controls fan function via the CPLD through the use of PWM 736 registers. This driver reports status and pwm setting of the fans. 737 738config SENSORS_HIH6130 739 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 740 depends on I2C 741 help 742 If you say yes here you get support for Honeywell Humidicon 743 HIH-6130 and HIH-6131 Humidicon humidity sensors. 744 745 This driver can also be built as a module. If so, the module 746 will be called hih6130. 747 748config SENSORS_HS3001 749 tristate "Renesas HS3001 humidity and temperature sensors" 750 depends on I2C 751 help 752 If you say yes here you get support for the Renesas HS3001, 753 to HS3004 humidity and temperature sensors. 754 755 This driver can also be built as a module. If so, the module 756 will be called hs3001. 757 758config SENSORS_IBMAEM 759 tristate "IBM Active Energy Manager temperature/power sensors and control" 760 select IPMI_SI 761 depends on IPMI_HANDLER 762 help 763 If you say yes here you get support for the temperature and 764 power sensors and capping hardware in various IBM System X 765 servers that support Active Energy Manager. This includes 766 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 767 and certain HC10/HS2x/LS2x/QS2x blades. 768 769 This driver can also be built as a module. If so, the module 770 will be called ibmaem. 771 772config SENSORS_IBMPEX 773 tristate "IBM PowerExecutive temperature/power sensors" 774 select IPMI_SI 775 depends on IPMI_HANDLER 776 help 777 If you say yes here you get support for the temperature and 778 power sensors in various IBM System X servers that support 779 PowerExecutive. So far this includes the x3350, x3550, x3650, 780 x3655, and x3755; the x3800, x3850, and x3950 models that have 781 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 782 783 This driver can also be built as a module. If so, the module 784 will be called ibmpex. 785 786config SENSORS_IBMPOWERNV 787 tristate "IBM POWERNV platform sensors" 788 depends on PPC_POWERNV 789 default y 790 help 791 If you say yes here you get support for the temperature/fan/power 792 sensors on your PowerNV platform. 793 794 This driver can also be built as a module. If so, the module 795 will be called ibmpowernv. 796 797config SENSORS_IIO_HWMON 798 tristate "Hwmon driver that uses channels specified via iio maps" 799 depends on IIO 800 help 801 This is a platform driver that in combination with a suitable 802 map allows IIO devices to provide basic hwmon functionality 803 for those channels specified in the map. This map can be provided 804 either via platform data or the device tree bindings. 805 806config SENSORS_I5500 807 tristate "Intel 5500/5520/X58 temperature sensor" 808 depends on X86 && PCI 809 help 810 If you say yes here you get support for the temperature 811 sensor inside the Intel 5500, 5520 and X58 chipsets. 812 813 This driver can also be built as a module. If so, the module 814 will be called i5500_temp. 815 816config SENSORS_CORETEMP 817 tristate "Intel Core/Core2/Atom temperature sensor" 818 depends on X86 819 help 820 If you say yes here you get support for the temperature 821 sensor inside your CPU. Most of the family 6 CPUs 822 are supported. Check Documentation/hwmon/coretemp.rst for details. 823 824config SENSORS_IT87 825 tristate "ITE IT87xx and compatibles" 826 depends on !PPC 827 select HWMON_VID 828 help 829 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 830 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 831 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 832 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 833 clone. 834 835 This driver can also be built as a module. If so, the module 836 will be called it87. 837 838config SENSORS_JC42 839 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 840 depends on I2C 841 select REGMAP_I2C 842 help 843 If you say yes here, you get support for JEDEC JC42.4 compliant 844 temperature sensors, which are used on many DDR3 memory modules for 845 mobile devices and servers. Support will include, but not be limited 846 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 847 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 848 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 849 850 This driver can also be built as a module. If so, the module 851 will be called jc42. 852 853config SENSORS_POWERZ 854 tristate "ChargerLAB POWER-Z USB-C tester" 855 depends on USB 856 help 857 If you say yes here you get support for ChargerLAB POWER-Z series of 858 USB-C charging testers. 859 860 This driver can also be built as a module. If so, the module 861 will be called powerz. 862 863config SENSORS_POWR1220 864 tristate "Lattice POWR1220 Power Monitoring" 865 depends on I2C 866 help 867 If you say yes here you get access to the hardware monitoring 868 functions of the Lattice POWR1220 isp Power Supply Monitoring, 869 Sequencing and Margining Controller. 870 871 This driver can also be built as a module. If so, the module 872 will be called powr1220. 873 874config SENSORS_LAN966X 875 tristate "Microchip LAN966x Hardware Monitoring" 876 depends on SOC_LAN966 || COMPILE_TEST 877 select REGMAP 878 select POLYNOMIAL 879 help 880 If you say yes here you get support for temperature monitoring 881 on the Microchip LAN966x SoC. 882 883 This driver can also be built as a module. If so, the module 884 will be called lan966x-hwmon. 885 886config SENSORS_LINEAGE 887 tristate "Lineage Compact Power Line Power Entry Module" 888 depends on I2C 889 help 890 If you say yes here you get support for the Lineage Compact Power Line 891 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 892 CP2000DC, CP2725, and others. 893 894 This driver can also be built as a module. If so, the module 895 will be called lineage-pem. 896 897config SENSORS_LOCHNAGAR 898 tristate "Lochnagar Hardware Monitor" 899 depends on MFD_LOCHNAGAR 900 help 901 If you say yes here you get support for Lochnagar 2 temperature, 902 voltage and current sensors abilities. 903 904 This driver can also be built as a module. If so, the module 905 will be called lochnagar-hwmon. 906 907config SENSORS_LTC2945 908 tristate "Linear Technology LTC2945" 909 depends on I2C 910 select REGMAP_I2C 911 help 912 If you say yes here you get support for Linear Technology LTC2945 913 I2C System Monitor. 914 915 This driver can also be built as a module. If so, the module will 916 be called ltc2945. 917 918config SENSORS_LTC2947 919 tristate 920 921config SENSORS_LTC2947_I2C 922 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 923 depends on I2C 924 select REGMAP_I2C 925 select SENSORS_LTC2947 926 help 927 If you say yes here you get support for Linear Technology LTC2947 928 I2C High Precision Power and Energy Monitor 929 930 This driver can also be built as a module. If so, the module will 931 be called ltc2947-i2c. 932 933config SENSORS_LTC2947_SPI 934 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 935 depends on SPI_MASTER 936 select REGMAP_SPI 937 select SENSORS_LTC2947 938 help 939 If you say yes here you get support for Linear Technology LTC2947 940 SPI High Precision Power and Energy Monitor 941 942 This driver can also be built as a module. If so, the module will 943 be called ltc2947-spi. 944 945config SENSORS_LTC2990 946 tristate "Linear Technology LTC2990" 947 depends on I2C 948 help 949 If you say yes here you get support for Linear Technology LTC2990 950 I2C System Monitor. The LTC2990 supports a combination of voltage, 951 current and temperature monitoring. 952 953 This driver can also be built as a module. If so, the module will 954 be called ltc2990. 955 956config SENSORS_LTC2991 957 tristate "Analog Devices LTC2991" 958 depends on I2C 959 help 960 If you say yes here you get support for Analog Devices LTC2991 961 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 962 supports a combination of voltage, current and temperature monitoring. 963 964 This driver can also be built as a module. If so, the module will 965 be called ltc2991. 966 967config SENSORS_LTC2992 968 tristate "Linear Technology LTC2992" 969 depends on I2C 970 depends on GPIOLIB 971 help 972 If you say yes here you get support for Linear Technology LTC2992 973 I2C System Monitor. The LTC2992 measures current, voltage, and 974 power of two supplies. 975 976 This driver can also be built as a module. If so, the module will 977 be called ltc2992. 978 979config SENSORS_LTC4151 980 tristate "Linear Technology LTC4151" 981 depends on I2C 982 help 983 If you say yes here you get support for Linear Technology LTC4151 984 High Voltage I2C Current and Voltage Monitor interface. 985 986 This driver can also be built as a module. If so, the module will 987 be called ltc4151. 988 989config SENSORS_LTC4215 990 tristate "Linear Technology LTC4215" 991 depends on I2C 992 help 993 If you say yes here you get support for Linear Technology LTC4215 994 Hot Swap Controller I2C interface. 995 996 This driver can also be built as a module. If so, the module will 997 be called ltc4215. 998 999config SENSORS_LTC4222 1000 tristate "Linear Technology LTC4222" 1001 depends on I2C 1002 select REGMAP_I2C 1003 help 1004 If you say yes here you get support for Linear Technology LTC4222 1005 Dual Hot Swap Controller I2C interface. 1006 1007 This driver can also be built as a module. If so, the module will 1008 be called ltc4222. 1009 1010config SENSORS_LTC4245 1011 tristate "Linear Technology LTC4245" 1012 depends on I2C 1013 help 1014 If you say yes here you get support for Linear Technology LTC4245 1015 Multiple Supply Hot Swap Controller I2C interface. 1016 1017 This driver can also be built as a module. If so, the module will 1018 be called ltc4245. 1019 1020config SENSORS_LTC4260 1021 tristate "Linear Technology LTC4260" 1022 depends on I2C 1023 select REGMAP_I2C 1024 help 1025 If you say yes here you get support for Linear Technology LTC4260 1026 Positive Voltage Hot Swap Controller I2C interface. 1027 1028 This driver can also be built as a module. If so, the module will 1029 be called ltc4260. 1030 1031config SENSORS_LTC4261 1032 tristate "Linear Technology LTC4261" 1033 depends on I2C 1034 help 1035 If you say yes here you get support for Linear Technology LTC4261 1036 Negative Voltage Hot Swap Controller I2C interface. 1037 1038 This driver can also be built as a module. If so, the module will 1039 be called ltc4261. 1040 1041config SENSORS_LTQ_CPUTEMP 1042 bool "Lantiq cpu temperature sensor driver" 1043 depends on SOC_XWAY 1044 help 1045 If you say yes here you get support for the temperature 1046 sensor inside your CPU. 1047 1048config SENSORS_MAX1111 1049 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1050 depends on SPI_MASTER 1051 help 1052 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1053 ADC chips. 1054 1055 This driver can also be built as a module. If so, the module 1056 will be called max1111. 1057 1058config SENSORS_MAX127 1059 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1060 depends on I2C 1061 help 1062 Say y here to support Maxim's MAX127 DAS chips. 1063 1064 This driver can also be built as a module. If so, the module 1065 will be called max127. 1066 1067config SENSORS_MAX16065 1068 tristate "Maxim MAX16065 System Manager and compatibles" 1069 depends on I2C 1070 help 1071 If you say yes here you get support for hardware monitoring 1072 capabilities of the following Maxim System Manager chips. 1073 MAX16065 1074 MAX16066 1075 MAX16067 1076 MAX16068 1077 MAX16070 1078 MAX16071 1079 1080 This driver can also be built as a module. If so, the module 1081 will be called max16065. 1082 1083config SENSORS_MAX1619 1084 tristate "Maxim MAX1619 sensor chip" 1085 depends on I2C 1086 help 1087 If you say yes here you get support for MAX1619 sensor chip. 1088 1089 This driver can also be built as a module. If so, the module 1090 will be called max1619. 1091 1092config SENSORS_MAX1668 1093 tristate "Maxim MAX1668 and compatibles" 1094 depends on I2C 1095 help 1096 If you say yes here you get support for MAX1668, MAX1989 and 1097 MAX1805 chips. 1098 1099 This driver can also be built as a module. If so, the module 1100 will be called max1668. 1101 1102config SENSORS_MAX197 1103 tristate "Maxim MAX197 and compatibles" 1104 help 1105 Support for the Maxim MAX197 A/D converter. 1106 Support will include, but not be limited to, MAX197, and MAX199. 1107 1108 This driver can also be built as a module. If so, the module 1109 will be called max197. 1110 1111config SENSORS_MAX31722 1112 tristate "MAX31722 temperature sensor" 1113 depends on SPI 1114 help 1115 Support for the Maxim Integrated MAX31722/MAX31723 digital 1116 thermometers/thermostats operating over an SPI interface. 1117 1118 This driver can also be built as a module. If so, the module 1119 will be called max31722. 1120 1121config SENSORS_MAX31730 1122 tristate "MAX31730 temperature sensor" 1123 depends on I2C 1124 help 1125 Support for the Maxim Integrated MAX31730 3-Channel Remote 1126 Temperature Sensor. 1127 1128 This driver can also be built as a module. If so, the module 1129 will be called max31730. 1130 1131config SENSORS_MAX31760 1132 tristate "MAX31760 fan speed controller" 1133 depends on I2C 1134 select REGMAP_I2C 1135 help 1136 Support for the Analog Devices MAX31760 Precision Fan-Speed 1137 Controller. MAX31760 integrates temperature sensing along with 1138 precision PWM fan control. 1139 1140 This driver can also be built as a module. If so, the module 1141 will be called max31760. 1142 1143config MAX31827 1144 tristate "MAX31827 low-power temperature switch and similar devices" 1145 depends on I2C 1146 select REGMAP_I2C 1147 help 1148 If you say yes here you get support for MAX31827, MAX31828 and 1149 MAX31829 low-power temperature switches and sensors connected with I2C. 1150 1151 This driver can also be built as a module. If so, the module 1152 will be called max31827. 1153 1154config SENSORS_MAX6620 1155 tristate "Maxim MAX6620 fan controller" 1156 depends on I2C 1157 help 1158 If you say yes here you get support for the MAX6620 1159 fan controller. 1160 1161 This driver can also be built as a module. If so, the module 1162 will be called max6620. 1163 1164config SENSORS_MAX6621 1165 tristate "Maxim MAX6621 sensor chip" 1166 depends on I2C 1167 select REGMAP_I2C 1168 help 1169 If you say yes here you get support for MAX6621 sensor chip. 1170 MAX6621 is a PECI-to-I2C translator provides an efficient, 1171 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1172 It allows reading the temperature from the PECI-compliant 1173 host directly from up to four PECI-enabled CPUs. 1174 1175 This driver can also be built as a module. If so, the module 1176 will be called max6621. 1177 1178config SENSORS_MAX6639 1179 tristate "Maxim MAX6639 sensor chip" 1180 depends on I2C 1181 help 1182 If you say yes here you get support for the MAX6639 1183 sensor chips. 1184 1185 This driver can also be built as a module. If so, the module 1186 will be called max6639. 1187 1188config SENSORS_MAX6642 1189 tristate "Maxim MAX6642 sensor chip" 1190 depends on I2C 1191 depends on SENSORS_LM90=n 1192 help 1193 If you say yes here you get support for MAX6642 sensor chip. 1194 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor 1195 with Overtemperature Alarm from Maxim. 1196 1197 This driver can also be built as a module. If so, the module 1198 will be called max6642. 1199 1200config SENSORS_MAX6650 1201 tristate "Maxim MAX6650 sensor chip" 1202 depends on I2C 1203 depends on THERMAL || THERMAL=n 1204 help 1205 If you say yes here you get support for the MAX6650 / MAX6651 1206 sensor chips. 1207 1208 This driver can also be built as a module. If so, the module 1209 will be called max6650. 1210 1211config SENSORS_MAX6697 1212 tristate "Maxim MAX6697 and compatibles" 1213 depends on I2C 1214 help 1215 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1216 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1217 temperature sensor chips. 1218 1219 This driver can also be built as a module. If so, the module 1220 will be called max6697. 1221 1222config SENSORS_MAX31790 1223 tristate "Maxim MAX31790 sensor chip" 1224 depends on I2C 1225 help 1226 If you say yes here you get support for 6-Channel PWM-Output 1227 Fan RPM Controller. 1228 1229 This driver can also be built as a module. If so, the module 1230 will be called max31790. 1231 1232config SENSORS_MC34VR500 1233 tristate "NXP MC34VR500 hardware monitoring driver" 1234 depends on I2C 1235 help 1236 If you say yes here you get support for the temperature and input 1237 voltage sensors of the NXP MC34VR500. 1238 1239config SENSORS_MCP3021 1240 tristate "Microchip MCP3021 and compatibles" 1241 depends on I2C 1242 help 1243 If you say yes here you get support for MCP3021 and MCP3221. 1244 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1245 with 12-bit resolution. 1246 1247 This driver can also be built as a module. If so, the module 1248 will be called mcp3021. 1249 1250config SENSORS_MLXREG_FAN 1251 tristate "Mellanox FAN driver" 1252 depends on MELLANOX_PLATFORM 1253 imply THERMAL 1254 select REGMAP 1255 help 1256 This option enables support for the FAN control on the Mellanox 1257 Ethernet and InfiniBand switches. The driver can be activated by the 1258 platform device add call. Say Y to enable these. To compile this 1259 driver as a module, choose 'M' here: the module will be called 1260 mlxreg-fan. 1261 1262config SENSORS_TC654 1263 tristate "Microchip TC654/TC655 and compatibles" 1264 depends on I2C 1265 help 1266 If you say yes here you get support for TC654 and TC655. 1267 The TC654 and TC655 are PWM mode fan speed controllers with 1268 FanSense technology for use with brushless DC fans. 1269 1270 This driver can also be built as a module. If so, the module 1271 will be called tc654. 1272 1273config SENSORS_TPS23861 1274 tristate "Texas Instruments TPS23861 PoE PSE" 1275 depends on I2C 1276 select REGMAP_I2C 1277 help 1278 If you say yes here you get support for Texas Instruments 1279 TPS23861 802.3at PoE PSE chips. 1280 1281 This driver can also be built as a module. If so, the module 1282 will be called tps23861. 1283 1284config SENSORS_MENF21BMC_HWMON 1285 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1286 depends on MFD_MENF21BMC 1287 help 1288 Say Y here to include support for the MEN 14F021P00 BMC 1289 hardware monitoring. 1290 1291 This driver can also be built as a module. If so the module 1292 will be called menf21bmc_hwmon. 1293 1294config SENSORS_MR75203 1295 tristate "Moortec Semiconductor MR75203 PVT Controller" 1296 select REGMAP_MMIO 1297 help 1298 If you say yes here you get support for Moortec MR75203 1299 PVT controller. 1300 1301 This driver can also be built as a module. If so, the module 1302 will be called mr75203. 1303 1304config SENSORS_ADCXX 1305 tristate "National Semiconductor ADCxxxSxxx" 1306 depends on SPI_MASTER 1307 help 1308 If you say yes here you get support for the National Semiconductor 1309 ADC<bb><c>S<sss> chip family, where 1310 * bb is the resolution in number of bits (8, 10, 12) 1311 * c is the number of channels (1, 2, 4, 8) 1312 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1313 kSPS and 101 for 1 MSPS) 1314 1315 Examples : ADC081S101, ADC124S501, ... 1316 1317 This driver can also be built as a module. If so, the module 1318 will be called adcxx. 1319 1320config SENSORS_LM63 1321 tristate "National Semiconductor LM63 and compatibles" 1322 depends on I2C 1323 help 1324 If you say yes here you get support for the National 1325 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1326 sensors with integrated fan control. Such chips are found 1327 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1328 others. 1329 1330 This driver can also be built as a module. If so, the module 1331 will be called lm63. 1332 1333config SENSORS_LM70 1334 tristate "National Semiconductor LM70 and compatibles" 1335 depends on SPI_MASTER 1336 help 1337 If you say yes here you get support for the National Semiconductor 1338 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1339 TMP125 digital temperature sensor chips. 1340 1341 This driver can also be built as a module. If so, the module 1342 will be called lm70. 1343 1344config SENSORS_LM73 1345 tristate "National Semiconductor LM73" 1346 depends on I2C 1347 help 1348 If you say yes here you get support for National Semiconductor LM73 1349 sensor chips. 1350 This driver can also be built as a module. If so, the module 1351 will be called lm73. 1352 1353config SENSORS_LM75 1354 tristate "National Semiconductor LM75 and compatibles" 1355 depends on I2C 1356 select REGMAP_I2C 1357 help 1358 If you say yes here you get support for one common type of 1359 temperature sensor chip, with models including: 1360 1361 - Analog Devices ADT75 1362 - Atmel (now Microchip) AT30TS74 1363 - Dallas Semiconductor DS75, DS1775 and DS7505 1364 - Global Mixed-mode Technology (GMT) G751 1365 - Maxim MAX6625 and MAX6626 1366 - Microchip MCP980x 1367 - National Semiconductor LM75, LM75A 1368 - NXP's LM75A 1369 - ST Microelectronics STDS75 1370 - ST Microelectronics STLM75 1371 - TelCom (now Microchip) TCN75 1372 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1373 TMP175, TMP275 1374 1375 This driver supports driver model based binding through board 1376 specific I2C device tables. 1377 1378 It also supports the "legacy" style of driver binding. To use 1379 that with some chips which don't replicate LM75 quirks exactly, 1380 you may need the "force" module parameter. 1381 1382 This driver can also be built as a module. If so, the module 1383 will be called lm75. 1384 1385config SENSORS_LM77 1386 tristate "National Semiconductor LM77" 1387 depends on I2C 1388 help 1389 If you say yes here you get support for National Semiconductor LM77 1390 sensor chips. 1391 1392 This driver can also be built as a module. If so, the module 1393 will be called lm77. 1394 1395config SENSORS_LM78 1396 tristate "National Semiconductor LM78 and compatibles" 1397 depends on I2C 1398 select HWMON_VID 1399 help 1400 If you say yes here you get support for National Semiconductor LM78, 1401 LM78-J and LM79. 1402 1403 This driver can also be built as a module. If so, the module 1404 will be called lm78. 1405 1406config SENSORS_LM80 1407 tristate "National Semiconductor LM80 and LM96080" 1408 depends on I2C 1409 help 1410 If you say yes here you get support for National Semiconductor 1411 LM80 and LM96080 sensor chips. 1412 1413 This driver can also be built as a module. If so, the module 1414 will be called lm80. 1415 1416config SENSORS_LM83 1417 tristate "National Semiconductor LM83 and compatibles" 1418 depends on I2C 1419 select REGMAP 1420 help 1421 If you say yes here you get support for National Semiconductor 1422 LM82 and LM83 sensor chips. 1423 1424 This driver can also be built as a module. If so, the module 1425 will be called lm83. 1426 1427config SENSORS_LM85 1428 tristate "National Semiconductor LM85 and compatibles" 1429 depends on I2C 1430 select HWMON_VID 1431 help 1432 If you say yes here you get support for National Semiconductor LM85 1433 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1434 EMC6D101, EMC6D102, and EMC6D103. 1435 1436 This driver can also be built as a module. If so, the module 1437 will be called lm85. 1438 1439config SENSORS_LM87 1440 tristate "National Semiconductor LM87 and compatibles" 1441 depends on I2C 1442 select HWMON_VID 1443 help 1444 If you say yes here you get support for National Semiconductor LM87 1445 and Analog Devices ADM1024 sensor chips. 1446 1447 This driver can also be built as a module. If so, the module 1448 will be called lm87. 1449 1450config SENSORS_LM90 1451 tristate "National Semiconductor LM90 and compatibles" 1452 depends on I2C 1453 help 1454 If you say yes here you get support for National Semiconductor LM84, 1455 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1456 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1457 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1458 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1459 MAX6696, 1460 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1461 Winbond/Nuvoton W83L771W/G/AWG/ASG, 1462 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1463 sensor chips. 1464 1465 This driver can also be built as a module. If so, the module 1466 will be called lm90. 1467 1468config SENSORS_LM92 1469 tristate "National Semiconductor LM92 and compatibles" 1470 depends on I2C 1471 help 1472 If you say yes here you get support for National Semiconductor LM92 1473 and Maxim MAX6635 sensor chips. 1474 1475 This driver can also be built as a module. If so, the module 1476 will be called lm92. 1477 1478config SENSORS_LM93 1479 tristate "National Semiconductor LM93 and compatibles" 1480 depends on I2C 1481 select HWMON_VID 1482 help 1483 If you say yes here you get support for National Semiconductor LM93, 1484 LM94, and compatible sensor chips. 1485 1486 This driver can also be built as a module. If so, the module 1487 will be called lm93. 1488 1489config SENSORS_LM95234 1490 tristate "National Semiconductor LM95234 and compatibles" 1491 depends on I2C 1492 help 1493 If you say yes here you get support for the LM95233 and LM95234 1494 temperature sensor chips. 1495 1496 This driver can also be built as a module. If so, the module 1497 will be called lm95234. 1498 1499config SENSORS_LM95241 1500 tristate "National Semiconductor LM95241 and compatibles" 1501 depends on I2C 1502 help 1503 If you say yes here you get support for LM95231 and LM95241 sensor 1504 chips. 1505 1506 This driver can also be built as a module. If so, the module 1507 will be called lm95241. 1508 1509config SENSORS_LM95245 1510 tristate "National Semiconductor LM95245 and compatibles" 1511 depends on I2C 1512 select REGMAP_I2C 1513 help 1514 If you say yes here you get support for LM95235 and LM95245 1515 temperature sensor chips. 1516 1517 This driver can also be built as a module. If so, the module 1518 will be called lm95245. 1519 1520config SENSORS_PC87360 1521 tristate "National Semiconductor PC87360 family" 1522 depends on !PPC 1523 select HWMON_VID 1524 help 1525 If you say yes here you get access to the hardware monitoring 1526 functions of the National Semiconductor PC8736x Super-I/O chips. 1527 The PC87360, PC87363 and PC87364 only have fan monitoring and 1528 control. The PC87365 and PC87366 additionally have voltage and 1529 temperature monitoring. 1530 1531 This driver can also be built as a module. If so, the module 1532 will be called pc87360. 1533 1534config SENSORS_PC87427 1535 tristate "National Semiconductor PC87427" 1536 depends on !PPC 1537 help 1538 If you say yes here you get access to the hardware monitoring 1539 functions of the National Semiconductor PC87427 Super-I/O chip. 1540 The chip has two distinct logical devices, one for fan speed 1541 monitoring and control, and one for voltage and temperature 1542 monitoring. Fan speed monitoring and control are supported, as 1543 well as temperature monitoring. Voltages aren't supported yet. 1544 1545 This driver can also be built as a module. If so, the module 1546 will be called pc87427. 1547 1548config SENSORS_NTC_THERMISTOR 1549 tristate "NTC thermistor support" 1550 depends on IIO 1551 depends on THERMAL || !THERMAL_OF 1552 help 1553 This driver supports NTC thermistors sensor reading and its 1554 interpretation. The driver can also monitor the temperature and 1555 send notifications about the temperature. 1556 1557 Currently, this driver supports 1558 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1559 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1560 B57891S0103 from EPCOS. 1561 1562 This driver can also be built as a module. If so, the module 1563 will be called ntc-thermistor. 1564 1565config SENSORS_NCT6683 1566 tristate "Nuvoton NCT6683D" 1567 depends on !PPC 1568 help 1569 If you say yes here you get support for the hardware monitoring 1570 functionality of the Nuvoton NCT6683D eSIO chip. 1571 1572 This driver can also be built as a module. If so, the module 1573 will be called nct6683. 1574 1575config SENSORS_NCT6775_CORE 1576 tristate 1577 select REGMAP 1578 help 1579 This module contains common code shared by the platform and 1580 i2c versions of the nct6775 driver; it is not useful on its 1581 own. 1582 1583 If built as a module, the module will be called 1584 nct6775-core. 1585 1586config SENSORS_NCT6775 1587 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1588 depends on !PPC 1589 depends on ACPI || ACPI=n 1590 select HWMON_VID 1591 select SENSORS_NCT6775_CORE 1592 help 1593 If you say yes here you get support for the hardware monitoring 1594 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1595 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1596 Super-I/O chips. This driver replaces the w83627ehf driver for 1597 NCT6775F and NCT6776F. 1598 1599 This driver can also be built as a module. If so, the module 1600 will be called nct6775. 1601 1602config SENSORS_NCT6775_I2C 1603 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1604 depends on I2C 1605 select REGMAP_I2C 1606 select SENSORS_NCT6775_CORE 1607 help 1608 If you say yes here you get support for the hardware monitoring 1609 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1610 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1611 Super-I/O chips via their I2C interface. 1612 1613 If you're not building a kernel for a BMC, this is probably 1614 not the driver you want (see CONFIG_SENSORS_NCT6775). 1615 1616 This driver can also be built as a module. If so, the module 1617 will be called nct6775-i2c. 1618 1619config SENSORS_NCT7802 1620 tristate "Nuvoton NCT7802Y" 1621 depends on I2C 1622 select REGMAP_I2C 1623 help 1624 If you say yes here you get support for the Nuvoton NCT7802Y 1625 hardware monitoring chip. 1626 1627 This driver can also be built as a module. If so, the module 1628 will be called nct7802. 1629 1630config SENSORS_NCT7904 1631 tristate "Nuvoton NCT7904" 1632 depends on I2C && WATCHDOG 1633 select WATCHDOG_CORE 1634 help 1635 If you say yes here you get support for the Nuvoton NCT7904 1636 hardware monitoring chip, including manual fan speed control 1637 and support for the integrated watchdog. 1638 1639 This driver can also be built as a module. If so, the module 1640 will be called nct7904. 1641 1642config SENSORS_NPCM7XX 1643 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1644 imply THERMAL 1645 help 1646 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1647 and Fan controllers. 1648 1649 This driver can also be built as a module. If so, the module 1650 will be called npcm750-pwm-fan. 1651 1652config SENSORS_NSA320 1653 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1654 depends on GPIOLIB && OF 1655 depends on MACH_KIRKWOOD || COMPILE_TEST 1656 help 1657 If you say yes here you get support for hardware monitoring 1658 for the ZyXEL NSA320 Media Server and other compatible devices 1659 (probably the NSA325 and some NSA310 variants). 1660 1661 The sensor data is taken from a Holtek HT46R065 microcontroller 1662 connected to GPIO lines. 1663 1664 This driver can also be built as a module. If so, the module 1665 will be called nsa320-hwmon. 1666 1667config SENSORS_NZXT_KRAKEN2 1668 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1669 depends on USB_HID 1670 help 1671 If you say yes here you get support for hardware monitoring for the 1672 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1673 1674 This driver can also be built as a module. If so, the module 1675 will be called nzxt-kraken2. 1676 1677config SENSORS_NZXT_SMART2 1678 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1679 depends on USB_HID 1680 help 1681 If you say yes here you get support for hardware monitoring for the 1682 NZXT RGB & Fan Controller/Smart Device v2. 1683 1684 This driver can also be built as a module. If so, the module 1685 will be called nzxt-smart2. 1686 1687source "drivers/hwmon/occ/Kconfig" 1688 1689config SENSORS_OXP 1690 tristate "OneXPlayer EC fan control" 1691 depends on ACPI 1692 depends on X86 1693 help 1694 If you say yes here you get support for fan readings and control over 1695 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant 1696 boards are supported. 1697 1698 Can also be built as a module. In that case it will be called oxp-sensors. 1699 1700config SENSORS_PCF8591 1701 tristate "Philips PCF8591 ADC/DAC" 1702 depends on I2C 1703 help 1704 If you say yes here you get support for Philips PCF8591 4-channel 1705 ADC, 1-channel DAC chips. 1706 1707 This driver can also be built as a module. If so, the module 1708 will be called pcf8591. 1709 1710 These devices are hard to detect and rarely found on mainstream 1711 hardware. If unsure, say N. 1712 1713source "drivers/hwmon/peci/Kconfig" 1714 1715source "drivers/hwmon/pmbus/Kconfig" 1716 1717config SENSORS_PWM_FAN 1718 tristate "PWM fan" 1719 depends on (PWM && OF) || COMPILE_TEST 1720 depends on THERMAL || THERMAL=n 1721 help 1722 If you say yes here you get support for fans connected to PWM lines. 1723 The driver uses the generic PWM interface, thus it will work on a 1724 variety of SoCs. 1725 1726 This driver can also be built as a module. If so, the module 1727 will be called pwm-fan. 1728 1729config SENSORS_RASPBERRYPI_HWMON 1730 tristate "Raspberry Pi voltage monitor" 1731 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1732 help 1733 If you say yes here you get support for voltage sensor on the 1734 Raspberry Pi. 1735 1736 This driver can also be built as a module. If so, the module 1737 will be called raspberrypi-hwmon. 1738 1739config SENSORS_SL28CPLD 1740 tristate "Kontron sl28cpld hardware monitoring driver" 1741 depends on MFD_SL28CPLD || COMPILE_TEST 1742 help 1743 If you say yes here you get support for the fan supervisor of the 1744 sl28cpld board management controller. 1745 1746 This driver can also be built as a module. If so, the module 1747 will be called sl28cpld-hwmon. 1748 1749config SENSORS_SBTSI 1750 tristate "Emulated SB-TSI temperature sensor" 1751 depends on I2C 1752 help 1753 If you say yes here you get support for emulated temperature 1754 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1755 1756 This driver can also be built as a module. If so, the module will 1757 be called sbtsi_temp. 1758 1759config SENSORS_SBRMI 1760 tristate "Emulated SB-RMI sensor" 1761 depends on I2C 1762 help 1763 If you say yes here you get support for emulated RMI 1764 sensors on AMD SoCs with APML interface connected to a BMC device. 1765 1766 This driver can also be built as a module. If so, the module will 1767 be called sbrmi. 1768 1769config SENSORS_SHT15 1770 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1771 depends on GPIOLIB || COMPILE_TEST 1772 select BITREVERSE 1773 help 1774 If you say yes here you get support for the Sensiron SHT10, SHT11, 1775 SHT15, SHT71, SHT75 humidity and temperature sensors. 1776 1777 This driver can also be built as a module. If so, the module 1778 will be called sht15. 1779 1780config SENSORS_SHT21 1781 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1782 depends on I2C 1783 help 1784 If you say yes here you get support for the Sensiron SHT21, SHT25 1785 humidity and temperature sensors. 1786 1787 This driver can also be built as a module. If so, the module 1788 will be called sht21. 1789 1790config SENSORS_SHT3x 1791 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1792 depends on I2C 1793 select CRC8 1794 help 1795 If you say yes here you get support for the Sensiron SHT30 and SHT31 1796 humidity and temperature sensors. 1797 1798 This driver can also be built as a module. If so, the module 1799 will be called sht3x. 1800 1801config SENSORS_SHT4x 1802 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1803 depends on I2C 1804 select CRC8 1805 help 1806 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1807 SHT45 humidity and temperature sensors. 1808 1809 This driver can also be built as a module. If so, the module 1810 will be called sht4x. 1811 1812config SENSORS_SHTC1 1813 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1814 depends on I2C 1815 help 1816 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1817 and SHTC3 humidity and temperature sensors. 1818 1819 This driver can also be built as a module. If so, the module 1820 will be called shtc1. 1821 1822config SENSORS_SIS5595 1823 tristate "Silicon Integrated Systems Corp. SiS5595" 1824 depends on PCI 1825 help 1826 If you say yes here you get support for the integrated sensors in 1827 SiS5595 South Bridges. 1828 1829 This driver can also be built as a module. If so, the module 1830 will be called sis5595. 1831 1832config SENSORS_SY7636A 1833 tristate "Silergy SY7636A" 1834 depends on MFD_SY7636A 1835 help 1836 If you say yes here you get support for the thermistor readout of 1837 the Silergy SY7636A PMIC. 1838 1839 This driver can also be built as a module. If so, the module 1840 will be called sy7636a-hwmon. 1841 1842config SENSORS_DME1737 1843 tristate "SMSC DME1737, SCH311x and compatibles" 1844 depends on I2C && !PPC 1845 select HWMON_VID 1846 help 1847 If you say yes here you get support for the hardware monitoring 1848 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1849 Asus A8000 Super-I/O chips. 1850 1851 This driver can also be built as a module. If so, the module 1852 will be called dme1737. 1853 1854config SENSORS_EMC1403 1855 tristate "SMSC EMC1403/23 thermal sensor" 1856 depends on I2C 1857 select REGMAP_I2C 1858 help 1859 If you say yes here you get support for the SMSC EMC1403/23 1860 temperature monitoring chip. 1861 1862 Threshold values can be configured using sysfs. 1863 Data from the different diodes are accessible via sysfs. 1864 1865config SENSORS_EMC2103 1866 tristate "SMSC EMC2103" 1867 depends on I2C 1868 help 1869 If you say yes here you get support for the temperature 1870 and fan sensors of the SMSC EMC2103 chips. 1871 1872 This driver can also be built as a module. If so, the module 1873 will be called emc2103. 1874 1875config SENSORS_EMC2305 1876 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 1877 depends on I2C 1878 imply THERMAL 1879 help 1880 If you say yes here you get support for the Microchip EMC2305 1881 fan controller chips. 1882 The Microchip EMC2305 is a fan controller for up to 5 fans. 1883 Fan rotation speeds are reported in RPM. 1884 1885 This driver can also be built as a module. If so, the module 1886 will be called emc2305. 1887 1888config SENSORS_EMC6W201 1889 tristate "SMSC EMC6W201" 1890 depends on I2C 1891 help 1892 If you say yes here you get support for the SMSC EMC6W201 1893 hardware monitoring chip. 1894 1895 This driver can also be built as a module. If so, the module 1896 will be called emc6w201. 1897 1898config SENSORS_SMSC47M1 1899 tristate "SMSC LPC47M10x and compatibles" 1900 depends on !PPC 1901 help 1902 If you say yes here you get support for the integrated fan 1903 monitoring and control capabilities of the SMSC LPC47B27x, 1904 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 1905 LPC47M192, LPC47M292 and LPC47M997 chips. 1906 1907 The temperature and voltage sensor features of the LPC47M15x, 1908 LPC47M192, LPC47M292 and LPC47M997 are supported by another 1909 driver, select also "SMSC LPC47M192 and compatibles" below for 1910 those. 1911 1912 This driver can also be built as a module. If so, the module 1913 will be called smsc47m1. 1914 1915config SENSORS_SMSC47M192 1916 tristate "SMSC LPC47M192 and compatibles" 1917 depends on I2C 1918 select HWMON_VID 1919 help 1920 If you say yes here you get support for the temperature and 1921 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 1922 and LPC47M997 chips. 1923 1924 The fan monitoring and control capabilities of these chips 1925 are supported by another driver, select 1926 "SMSC LPC47M10x and compatibles" above. You need both drivers 1927 if you want fan control and voltage/temperature sensor support. 1928 1929 This driver can also be built as a module. If so, the module 1930 will be called smsc47m192. 1931 1932config SENSORS_SMSC47B397 1933 tristate "SMSC LPC47B397-NC" 1934 depends on !PPC 1935 help 1936 If you say yes here you get support for the SMSC LPC47B397-NC 1937 sensor chip. 1938 1939 This driver can also be built as a module. If so, the module 1940 will be called smsc47b397. 1941 1942config SENSORS_SCH56XX_COMMON 1943 tristate 1944 select REGMAP 1945 1946config SENSORS_SCH5627 1947 tristate "SMSC SCH5627" 1948 depends on !PPC && WATCHDOG 1949 select SENSORS_SCH56XX_COMMON 1950 select WATCHDOG_CORE 1951 help 1952 If you say yes here you get support for the hardware monitoring 1953 features of the SMSC SCH5627 Super-I/O chip including support for 1954 the integrated watchdog. 1955 1956 This driver can also be built as a module. If so, the module 1957 will be called sch5627. 1958 1959config SENSORS_SCH5636 1960 tristate "SMSC SCH5636" 1961 depends on !PPC && WATCHDOG 1962 select SENSORS_SCH56XX_COMMON 1963 select WATCHDOG_CORE 1964 help 1965 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 1966 hardware monitoring solutions, allowing motherboard manufacturers to 1967 create their own custom hwmon solution based upon the SCH5636. 1968 1969 Currently this driver only supports the Fujitsu Theseus SCH5636 based 1970 hwmon solution. Say yes here if you want support for the Fujitsu 1971 Theseus' hardware monitoring features including support for the 1972 integrated watchdog. 1973 1974 This driver can also be built as a module. If so, the module 1975 will be called sch5636. 1976 1977config SENSORS_STTS751 1978 tristate "ST Microelectronics STTS751" 1979 depends on I2C 1980 help 1981 If you say yes here you get support for STTS751 1982 temperature sensor chips. 1983 1984 This driver can also be built as a module. If so, the module 1985 will be called stts751. 1986 1987config SENSORS_SFCTEMP 1988 tristate "Starfive JH71x0 temperature sensor" 1989 depends on ARCH_STARFIVE || COMPILE_TEST 1990 help 1991 If you say yes here you get support for temperature sensor 1992 on the Starfive JH71x0 SoCs. 1993 1994 This driver can also be built as a module. If so, the module 1995 will be called sfctemp. 1996 1997config SENSORS_ADC128D818 1998 tristate "Texas Instruments ADC128D818" 1999 depends on I2C 2000 help 2001 If you say yes here you get support for the Texas Instruments 2002 ADC128D818 System Monitor with Temperature Sensor chip. 2003 2004 This driver can also be built as a module. If so, the module 2005 will be called adc128d818. 2006 2007config SENSORS_ADS7828 2008 tristate "Texas Instruments ADS7828 and compatibles" 2009 depends on I2C 2010 select REGMAP_I2C 2011 help 2012 If you say yes here you get support for Texas Instruments ADS7828 and 2013 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 2014 it is 8-bit on ADS7830. 2015 2016 This driver can also be built as a module. If so, the module 2017 will be called ads7828. 2018 2019config SENSORS_ADS7871 2020 tristate "Texas Instruments ADS7871 A/D converter" 2021 depends on SPI 2022 help 2023 If you say yes here you get support for TI ADS7871 & ADS7870 2024 2025 This driver can also be built as a module. If so, the module 2026 will be called ads7871. 2027 2028config SENSORS_AMC6821 2029 tristate "Texas Instruments AMC6821" 2030 depends on I2C 2031 help 2032 If you say yes here you get support for the Texas Instruments 2033 AMC6821 hardware monitoring chips. 2034 2035 This driver can also be built as a module. If so, the module 2036 will be called amc6821. 2037 2038config SENSORS_INA209 2039 tristate "TI / Burr Brown INA209" 2040 depends on I2C 2041 help 2042 If you say yes here you get support for the TI / Burr Brown INA209 2043 voltage / current / power monitor I2C interface. 2044 2045 This driver can also be built as a module. If so, the module will 2046 be called ina209. 2047 2048config SENSORS_INA2XX 2049 tristate "Texas Instruments INA219 and compatibles" 2050 depends on I2C 2051 select REGMAP_I2C 2052 help 2053 If you say yes here you get support for INA219, INA220, INA226, 2054 INA230, and INA231 power monitor chips. 2055 2056 The INA2xx driver is configured for the default configuration of 2057 the part as described in the datasheet. 2058 Default value for Rshunt is 10 mOhms. 2059 This driver can also be built as a module. If so, the module 2060 will be called ina2xx. 2061 2062config SENSORS_INA238 2063 tristate "Texas Instruments INA238" 2064 depends on I2C 2065 select REGMAP_I2C 2066 help 2067 If you say yes here you get support for the INA238 power monitor 2068 chip. This driver supports voltage, current, power and temperature 2069 measurements as well as alarm configuration. 2070 2071 This driver can also be built as a module. If so, the module 2072 will be called ina238. 2073 2074config SENSORS_INA3221 2075 tristate "Texas Instruments INA3221 Triple Power Monitor" 2076 depends on I2C 2077 select REGMAP_I2C 2078 help 2079 If you say yes here you get support for the TI INA3221 Triple Power 2080 Monitor. 2081 2082 This driver can also be built as a module. If so, the module 2083 will be called ina3221. 2084 2085config SENSORS_TC74 2086 tristate "Microchip TC74" 2087 depends on I2C 2088 help 2089 If you say yes here you get support for Microchip TC74 single 2090 input temperature sensor chips. 2091 2092 This driver can also be built as a module. If so, the module 2093 will be called tc74. 2094 2095config SENSORS_THMC50 2096 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2097 depends on I2C 2098 help 2099 If you say yes here you get support for Texas Instruments THMC50 2100 sensor chips and clones: the Analog Devices ADM1022. 2101 2102 This driver can also be built as a module. If so, the module 2103 will be called thmc50. 2104 2105config SENSORS_TMP102 2106 tristate "Texas Instruments TMP102" 2107 depends on I2C 2108 select REGMAP_I2C 2109 help 2110 If you say yes here you get support for Texas Instruments TMP102 2111 sensor chips. 2112 2113 This driver can also be built as a module. If so, the module 2114 will be called tmp102. 2115 2116config SENSORS_TMP103 2117 tristate "Texas Instruments TMP103" 2118 depends on I2C 2119 select REGMAP_I2C 2120 help 2121 If you say yes here you get support for Texas Instruments TMP103 2122 sensor chips. 2123 2124 This driver can also be built as a module. If so, the module 2125 will be called tmp103. 2126 2127config SENSORS_TMP108 2128 tristate "Texas Instruments TMP108" 2129 depends on I2C 2130 select REGMAP_I2C 2131 help 2132 If you say yes here you get support for Texas Instruments TMP108 2133 sensor chips. 2134 2135 This driver can also be built as a module. If so, the module 2136 will be called tmp108. 2137 2138config SENSORS_TMP401 2139 tristate "Texas Instruments TMP401 and compatibles" 2140 depends on I2C 2141 select REGMAP 2142 help 2143 If you say yes here you get support for Texas Instruments TMP401, 2144 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2145 2146 This driver can also be built as a module. If so, the module 2147 will be called tmp401. 2148 2149config SENSORS_TMP421 2150 tristate "Texas Instruments TMP421 and compatible" 2151 depends on I2C 2152 help 2153 If you say yes here you get support for Texas Instruments TMP421, 2154 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2155 2156 This driver can also be built as a module. If so, the module 2157 will be called tmp421. 2158 2159config SENSORS_TMP464 2160 tristate "Texas Instruments TMP464 and compatible" 2161 depends on I2C 2162 select REGMAP_I2C 2163 help 2164 If you say yes here you get support for Texas Instruments TMP464 2165 and TMP468 temperature sensor chips. 2166 2167 This driver can also be built as a module. If so, the module 2168 will be called tmp464. 2169 2170config SENSORS_TMP513 2171 tristate "Texas Instruments TMP513 and compatibles" 2172 depends on I2C 2173 help 2174 If you say yes here you get support for Texas Instruments TMP512, 2175 and TMP513 temperature and power supply sensor chips. 2176 2177 This driver can also be built as a module. If so, the module 2178 will be called tmp513. 2179 2180config SENSORS_VEXPRESS 2181 tristate "Versatile Express" 2182 depends on VEXPRESS_CONFIG 2183 help 2184 This driver provides support for hardware sensors available on 2185 the ARM Ltd's Versatile Express platform. It can provide wide 2186 range of information like temperature, power, energy. 2187 2188config SENSORS_VIA_CPUTEMP 2189 tristate "VIA CPU temperature sensor" 2190 depends on X86 2191 select HWMON_VID 2192 help 2193 If you say yes here you get support for the temperature 2194 sensor inside your CPU. Supported are all known variants of 2195 the VIA C7 and Nano. 2196 2197config SENSORS_VIA686A 2198 tristate "VIA686A" 2199 depends on PCI 2200 help 2201 If you say yes here you get support for the integrated sensors in 2202 Via 686A/B South Bridges. 2203 2204 This driver can also be built as a module. If so, the module 2205 will be called via686a. 2206 2207config SENSORS_VT1211 2208 tristate "VIA VT1211" 2209 depends on !PPC 2210 select HWMON_VID 2211 help 2212 If you say yes here then you get support for hardware monitoring 2213 features of the VIA VT1211 Super-I/O chip. 2214 2215 This driver can also be built as a module. If so, the module 2216 will be called vt1211. 2217 2218config SENSORS_VT8231 2219 tristate "VIA VT8231" 2220 depends on PCI 2221 select HWMON_VID 2222 help 2223 If you say yes here then you get support for the integrated sensors 2224 in the VIA VT8231 device. 2225 2226 This driver can also be built as a module. If so, the module 2227 will be called vt8231. 2228 2229config SENSORS_W83773G 2230 tristate "Nuvoton W83773G" 2231 depends on I2C 2232 select REGMAP_I2C 2233 help 2234 If you say yes here you get support for the Nuvoton W83773G hardware 2235 monitoring chip. 2236 2237 This driver can also be built as a module. If so, the module 2238 will be called w83773g. 2239 2240config SENSORS_W83781D 2241 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2242 depends on I2C 2243 select HWMON_VID 2244 help 2245 If you say yes here you get support for the Winbond W8378x series 2246 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2247 Asus AS99127F. 2248 2249 This driver can also be built as a module. If so, the module 2250 will be called w83781d. 2251 2252config SENSORS_W83791D 2253 tristate "Winbond W83791D" 2254 depends on I2C 2255 select HWMON_VID 2256 help 2257 If you say yes here you get support for the Winbond W83791D chip. 2258 2259 This driver can also be built as a module. If so, the module 2260 will be called w83791d. 2261 2262config SENSORS_W83792D 2263 tristate "Winbond W83792D" 2264 depends on I2C 2265 help 2266 If you say yes here you get support for the Winbond W83792D chip. 2267 2268 This driver can also be built as a module. If so, the module 2269 will be called w83792d. 2270 2271config SENSORS_W83793 2272 tristate "Winbond W83793" 2273 depends on I2C 2274 select HWMON_VID 2275 help 2276 If you say yes here you get support for the Winbond W83793 2277 hardware monitoring chip, including support for the integrated 2278 watchdog. 2279 2280 This driver can also be built as a module. If so, the module 2281 will be called w83793. 2282 2283config SENSORS_W83795 2284 tristate "Winbond/Nuvoton W83795G/ADG" 2285 depends on I2C 2286 help 2287 If you say yes here you get support for the Winbond W83795G and 2288 W83795ADG hardware monitoring chip, including manual fan speed 2289 control. 2290 2291 This driver can also be built as a module. If so, the module 2292 will be called w83795. 2293 2294config SENSORS_W83795_FANCTRL 2295 bool "Include automatic fan control support" 2296 depends on SENSORS_W83795 2297 help 2298 If you say yes here, support for automatic fan speed control 2299 will be included in the driver. 2300 2301 Please also note that this option will create sysfs attribute 2302 files which may change in the future, so you shouldn't rely 2303 on them being stable. 2304 2305config SENSORS_W83L785TS 2306 tristate "Winbond W83L785TS-S" 2307 depends on I2C 2308 help 2309 If you say yes here you get support for the Winbond W83L785TS-S 2310 sensor chip, which is used on the Asus A7N8X, among other 2311 motherboards. 2312 2313 This driver can also be built as a module. If so, the module 2314 will be called w83l785ts. 2315 2316config SENSORS_W83L786NG 2317 tristate "Winbond W83L786NG, W83L786NR" 2318 depends on I2C 2319 help 2320 If you say yes here you get support for the Winbond W83L786NG 2321 and W83L786NR sensor chips. 2322 2323 This driver can also be built as a module. If so, the module 2324 will be called w83l786ng. 2325 2326config SENSORS_W83627HF 2327 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2328 depends on !PPC 2329 select HWMON_VID 2330 help 2331 If you say yes here you get support for the Winbond W836X7 series 2332 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2333 W83697HF. 2334 2335 This driver can also be built as a module. If so, the module 2336 will be called w83627hf. 2337 2338config SENSORS_W83627EHF 2339 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2340 depends on !PPC 2341 select HWMON_VID 2342 help 2343 If you say yes here you get support for the hardware 2344 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2345 2346 This driver also supports the W83627EHG, which is the lead-free 2347 version of the W83627EHF, and the W83627DHG, which is a similar 2348 chip suited for specific Intel processors that use PECI such as 2349 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2350 version of the W83627DHG (as far as hardware monitoring goes.) 2351 2352 This driver also supports Nuvoton W83667HG and W83667HG-B. 2353 2354 This driver can also be built as a module. If so, the module 2355 will be called w83627ehf. 2356 2357config SENSORS_WM831X 2358 tristate "WM831x PMICs" 2359 depends on MFD_WM831X 2360 help 2361 If you say yes here you get support for the hardware 2362 monitoring functionality of the Wolfson Microelectronics 2363 WM831x series of PMICs. 2364 2365 This driver can also be built as a module. If so, the module 2366 will be called wm831x-hwmon. 2367 2368config SENSORS_WM8350 2369 tristate "Wolfson Microelectronics WM835x" 2370 depends on MFD_WM8350 2371 help 2372 If you say yes here you get support for the hardware 2373 monitoring features of the WM835x series of PMICs. 2374 2375 This driver can also be built as a module. If so, the module 2376 will be called wm8350-hwmon. 2377 2378config SENSORS_ULTRA45 2379 tristate "Sun Ultra45 PIC16F747" 2380 depends on SPARC64 2381 help 2382 This driver provides support for the Ultra45 workstation environmental 2383 sensors. 2384 2385config SENSORS_XGENE 2386 tristate "APM X-Gene SoC hardware monitoring driver" 2387 depends on XGENE_SLIMPRO_MBOX || PCC 2388 help 2389 If you say yes here you get support for the temperature 2390 and power sensors for APM X-Gene SoC. 2391 2392config SENSORS_INTEL_M10_BMC_HWMON 2393 tristate "Intel MAX10 BMC Hardware Monitoring" 2394 depends on MFD_INTEL_M10_BMC_CORE 2395 help 2396 This driver provides support for the hardware monitoring functionality 2397 on Intel MAX10 BMC chip. 2398 2399 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2400 sensors monitor various telemetry data of different components on the 2401 card, e.g. board temperature, FPGA core temperature/voltage/current. 2402 2403if ACPI 2404 2405comment "ACPI drivers" 2406 2407config SENSORS_ACPI_POWER 2408 tristate "ACPI 4.0 power meter" 2409 help 2410 This driver exposes ACPI 4.0 power meters as hardware monitoring 2411 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2412 and a power meter. 2413 2414 To compile this driver as a module, choose M here: 2415 the module will be called acpi_power_meter. 2416 2417config SENSORS_ATK0110 2418 tristate "ASUS ATK0110" 2419 depends on X86 2420 help 2421 If you say yes here you get support for the ACPI hardware 2422 monitoring interface found in many ASUS motherboards. This 2423 driver will provide readings of fans, voltages and temperatures 2424 through the system firmware. 2425 2426 This driver can also be built as a module. If so, the module 2427 will be called asus_atk0110. 2428 2429config SENSORS_ASUS_WMI 2430 tristate "ASUS WMI X370/X470/B450/X399" 2431 depends on ACPI_WMI 2432 help 2433 If you say yes here you get support for the ACPI hardware monitoring 2434 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2435 will provide readings of fans, voltages and temperatures through the system 2436 firmware. 2437 2438 This driver can also be built as a module. If so, the module 2439 will be called asus_wmi_sensors. 2440 2441config SENSORS_ASUS_EC 2442 tristate "ASUS EC Sensors" 2443 depends on X86 2444 help 2445 If you say yes here you get support for the ACPI embedded controller 2446 hardware monitoring interface found in ASUS motherboards. The driver 2447 currently supports B550/X570 boards, although other ASUS boards might 2448 provide this monitoring interface as well. 2449 2450 This driver can also be built as a module. If so, the module 2451 will be called asus_ec_sensors. 2452 2453config SENSORS_HP_WMI 2454 tristate "HP WMI Sensors" 2455 depends on ACPI_WMI 2456 help 2457 If you say yes here you get support for the ACPI hardware monitoring 2458 interface found in HP (and some HP Compaq) business-class computers. 2459 Available sensors vary between systems. Temperature and fan speed 2460 sensors are the most common. 2461 2462 This driver can also be built as a module. If so, the module 2463 will be called hp_wmi_sensors. 2464 2465endif # ACPI 2466 2467endif # HWMON 2468