1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on (X86 && DMI) || COMPILE_TEST 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on (X86 && DMI) || COMPILE_TEST 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1021 109 tristate "Analog Devices ADM1021 and compatibles" 110 depends on I2C 111 depends on SENSORS_LM90=n 112 help 113 If you say yes here you get support for Analog Devices ADM1021 114 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, 115 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. 116 117 This driver can also be built as a module. If so, the module 118 will be called adm1021. 119 120config SENSORS_ADM1025 121 tristate "Analog Devices ADM1025 and compatibles" 122 depends on I2C 123 select HWMON_VID 124 help 125 If you say yes here you get support for Analog Devices ADM1025 126 and Philips NE1619 sensor chips. 127 128 This driver can also be built as a module. If so, the module 129 will be called adm1025. 130 131config SENSORS_ADM1026 132 tristate "Analog Devices ADM1026 and compatibles" 133 depends on I2C 134 select HWMON_VID 135 help 136 If you say yes here you get support for Analog Devices ADM1026 137 sensor chip. 138 139 This driver can also be built as a module. If so, the module 140 will be called adm1026. 141 142config SENSORS_ADM1029 143 tristate "Analog Devices ADM1029" 144 depends on I2C 145 help 146 If you say yes here you get support for Analog Devices ADM1029 147 sensor chip. 148 Very rare chip, please let us know you use it. 149 150 This driver can also be built as a module. If so, the module 151 will be called adm1029. 152 153config SENSORS_ADM1031 154 tristate "Analog Devices ADM1031 and compatibles" 155 depends on I2C 156 help 157 If you say yes here you get support for Analog Devices ADM1031 158 and ADM1030 sensor chips. 159 160 This driver can also be built as a module. If so, the module 161 will be called adm1031. 162 163config SENSORS_ADM1177 164 tristate "Analog Devices ADM1177 and compatibles" 165 depends on I2C 166 help 167 If you say yes here you get support for Analog Devices ADM1177 168 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm1177. 172 173config SENSORS_ADM9240 174 tristate "Analog Devices ADM9240 and compatibles" 175 depends on I2C 176 select HWMON_VID 177 help 178 If you say yes here you get support for Analog Devices ADM9240, 179 Dallas DS1780, National Semiconductor LM81 sensor chips. 180 181 This driver can also be built as a module. If so, the module 182 will be called adm9240. 183 184config SENSORS_ADT7X10 185 tristate 186 select REGMAP 187 help 188 This module contains common code shared by the ADT7310/ADT7320 and 189 ADT7410/ADT7420 temperature monitoring chip drivers. 190 191 If built as a module, the module will be called adt7x10. 192 193config SENSORS_ADT7310 194 tristate "Analog Devices ADT7310/ADT7320" 195 depends on SPI_MASTER 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7310 and ADT7320 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7310. 203 204config SENSORS_ADT7410 205 tristate "Analog Devices ADT7410/ADT7420" 206 depends on I2C 207 select SENSORS_ADT7X10 208 help 209 If you say yes here you get support for the Analog Devices 210 ADT7410 and ADT7420 temperature monitoring chips. 211 212 This driver can also be built as a module. If so, the module 213 will be called adt7410. 214 215config SENSORS_ADT7411 216 tristate "Analog Devices ADT7411" 217 depends on I2C 218 help 219 If you say yes here you get support for the Analog Devices 220 ADT7411 voltage and temperature monitoring chip. 221 222 This driver can also be built as a module. If so, the module 223 will be called adt7411. 224 225config SENSORS_ADT7462 226 tristate "Analog Devices ADT7462" 227 depends on I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7462 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7462. 234 235config SENSORS_ADT7470 236 tristate "Analog Devices ADT7470" 237 depends on I2C 238 help 239 If you say yes here you get support for the Analog Devices 240 ADT7470 temperature monitoring chips. 241 242 This driver can also be built as a module. If so, the module 243 will be called adt7470. 244 245config SENSORS_ADT7475 246 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 247 depends on I2C 248 select HWMON_VID 249 help 250 If you say yes here you get support for the Analog Devices 251 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 252 chips. 253 254 This driver can also be built as a module. If so, the module 255 will be called adt7475. 256 257config SENSORS_AHT10 258 tristate "Aosong AHT10, AHT20" 259 depends on I2C 260 select CRC8 261 help 262 If you say yes here, you get support for the Aosong AHT10 and AHT20 263 temperature and humidity sensors 264 265 This driver can also be built as a module. If so, the module 266 will be called aht10. 267 268config SENSORS_AQUACOMPUTER_D5NEXT 269 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 270 depends on USB_HID 271 select CRC16 272 help 273 If you say yes here you get support for sensors and fans of 274 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 275 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 276 Next sensor, where available. 277 278 This driver can also be built as a module. If so, the module 279 will be called aquacomputer_d5next. 280 281config SENSORS_AS370 282 tristate "Synaptics AS370 SoC hardware monitoring driver" 283 help 284 If you say yes here you get support for the PVT sensors of 285 the Synaptics AS370 SoC 286 287 This driver can also be built as a module. If so, the module 288 will be called as370-hwmon. 289 290 291config SENSORS_ASC7621 292 tristate "Andigilog aSC7621" 293 depends on I2C 294 help 295 If you say yes here you get support for the aSC7621 296 family of SMBus sensors chip found on most Intel X38, X48, X58, 297 945, 965 and 975 desktop boards. Currently supported chips: 298 aSC7621 299 aSC7621a 300 301 This driver can also be built as a module. If so, the module 302 will be called asc7621. 303 304config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NB 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338config SENSORS_FAM15H_POWER 339 tristate "AMD Family 15h processor power" 340 depends on X86 && PCI && CPU_SUP_AMD 341 help 342 If you say yes here you get support for processor power 343 information of your AMD family 15h CPU. 344 345 This driver can also be built as a module. If so, the module 346 will be called fam15h_power. 347 348config SENSORS_APPLESMC 349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 350 depends on INPUT && X86 351 select NEW_LEDS 352 select LEDS_CLASS 353 help 354 This driver provides support for the Apple System Management 355 Controller, which provides an accelerometer (Apple Sudden Motion 356 Sensor), light sensors, temperature sensors, keyboard backlight 357 control and fan control. 358 359 Only Intel-based Apple's computers are supported (MacBook Pro, 360 MacBook, MacMini). 361 362 Data from the different sensors, keyboard backlight control and fan 363 control are accessible via sysfs. 364 365 This driver also provides an absolute input class device, allowing 366 the laptop to act as a pinball machine-esque joystick. 367 368 Say Y here if you have an applicable laptop and want to experience 369 the awesome power of applesmc. 370 371config SENSORS_ARM_SCMI 372 tristate "ARM SCMI Sensors" 373 depends on ARM_SCMI_PROTOCOL 374 depends on THERMAL || !THERMAL_OF 375 help 376 This driver provides support for temperature, voltage, current 377 and power sensors available on SCMI based platforms. The actual 378 number and type of sensors exported depend on the platform. 379 380 This driver can also be built as a module. If so, the module 381 will be called scmi-hwmon. 382 383config SENSORS_ARM_SCPI 384 tristate "ARM SCPI Sensors" 385 depends on ARM_SCPI_PROTOCOL 386 depends on THERMAL || !THERMAL_OF 387 help 388 This driver provides support for temperature, voltage, current 389 and power sensors available on ARM Ltd's SCP based platforms. The 390 actual number and type of sensors exported depend on the platform. 391 392config SENSORS_ASB100 393 tristate "Asus ASB100 Bach" 394 depends on (X86 || COMPILE_TEST) && I2C 395 select HWMON_VID 396 help 397 If you say yes here you get support for the ASB100 Bach sensor 398 chip found on some Asus mainboards. 399 400 This driver can also be built as a module. If so, the module 401 will be called asb100. 402 403config SENSORS_ASPEED 404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 405 depends on ARCH_ASPEED || COMPILE_TEST 406 depends on THERMAL || THERMAL=n 407 select REGMAP 408 help 409 This driver provides support for ASPEED AST2400/AST2500 PWM 410 and Fan Tacho controllers. 411 412 This driver can also be built as a module. If so, the module 413 will be called aspeed_pwm_tacho. 414 415config SENSORS_ATXP1 416 tristate "Attansic ATXP1 VID controller" 417 depends on I2C 418 select HWMON_VID 419 help 420 If you say yes here you get support for the Attansic ATXP1 VID 421 controller. 422 423 If your board have such a chip, you are able to control your CPU 424 core and other voltages. 425 426 This driver can also be built as a module. If so, the module 427 will be called atxp1. 428 429config SENSORS_BT1_PVT 430 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 431 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 432 select POLYNOMIAL 433 help 434 If you say yes here you get support for Baikal-T1 PVT sensor 435 embedded into the SoC. 436 437 This driver can also be built as a module. If so, the module will be 438 called bt1-pvt. 439 440config SENSORS_BT1_PVT_ALARMS 441 bool "Enable Baikal-T1 PVT sensor alarms" 442 depends on SENSORS_BT1_PVT 443 help 444 Baikal-T1 PVT IP-block provides threshold registers for each 445 supported sensor. But the corresponding interrupts might be 446 generated by the thresholds comparator only in synchronization with 447 a data conversion. Additionally there is only one sensor data can 448 be converted at a time. All of these makes the interface impossible 449 to be used for the hwmon alarms implementation without periodic 450 switch between the PVT sensors. By default the data conversion is 451 performed on demand from the user-space. If this config is enabled 452 the data conversion will be periodically performed and the data will be 453 saved in the internal driver cache. 454 455config SENSORS_CORSAIR_CPRO 456 tristate "Corsair Commander Pro controller" 457 depends on HID 458 help 459 If you say yes here you get support for the Corsair Commander Pro 460 controller. 461 462 This driver can also be built as a module. If so, the module 463 will be called corsair-cpro. 464 465config SENSORS_CORSAIR_PSU 466 tristate "Corsair PSU HID controller" 467 depends on HID 468 help 469 If you say yes here you get support for Corsair PSUs with a HID 470 interface. 471 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 472 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 473 by Corsair. 474 475 This driver can also be built as a module. If so, the module 476 will be called corsair-psu. 477 478config SENSORS_DRIVETEMP 479 tristate "Hard disk drives with temperature sensors" 480 depends on SCSI && ATA 481 help 482 If you say yes you get support for the temperature sensor on 483 hard disk drives. 484 485 This driver can also be built as a module. If so, the module 486 will be called drivetemp. 487 488config SENSORS_DS620 489 tristate "Dallas Semiconductor DS620" 490 depends on I2C 491 help 492 If you say yes here you get support for Dallas Semiconductor 493 DS620 sensor chip. 494 495 This driver can also be built as a module. If so, the module 496 will be called ds620. 497 498config SENSORS_DS1621 499 tristate "Dallas Semiconductor DS1621 and compatibles" 500 depends on I2C 501 help 502 If you say yes here you get support for Dallas Semiconductor/Maxim 503 Integrated DS1621 sensor chips and compatible models including: 504 505 - Dallas Semiconductor DS1625 506 - Maxim Integrated DS1631 507 - Maxim Integrated DS1721 508 - Maxim Integrated DS1731 509 510 This driver can also be built as a module. If so, the module 511 will be called ds1621. 512 513config SENSORS_DELL_SMM 514 tristate "Dell laptop SMM BIOS hwmon driver" 515 depends on X86 516 imply THERMAL 517 help 518 This hwmon driver adds support for reporting temperature of different 519 sensors and controls the fans on Dell laptops via System Management 520 Mode provided by Dell BIOS. 521 522 When option I8K is also enabled this driver provides legacy /proc/i8k 523 userspace interface for i8kutils package. 524 525config I8K 526 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 527 depends on SENSORS_DELL_SMM 528 depends on PROC_FS 529 help 530 This option enables the legacy /proc/i8k userspace interface of the 531 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 532 version, temperatures and allows control of fan speeds of some Dell 533 laptops. Sometimes it also reports power and hotkey status. 534 535 This interface is required to run programs from the i8kutils package. 536 537 Say Y if you intend to run userspace programs that use this interface. 538 Say N otherwise. 539 540config SENSORS_DA9052_ADC 541 tristate "Dialog DA9052/DA9053 ADC" 542 depends on PMIC_DA9052 543 help 544 Say y here to support the ADC found on Dialog Semiconductor 545 DA9052-BC and DA9053-AA/Bx PMICs. 546 547 This driver can also be built as module. If so, the module 548 will be called da9052-hwmon. 549 550config SENSORS_DA9055 551 tristate "Dialog Semiconductor DA9055 ADC" 552 depends on MFD_DA9055 553 help 554 If you say yes here you get support for ADC on the Dialog 555 Semiconductor DA9055 PMIC. 556 557 This driver can also be built as a module. If so, the module 558 will be called da9055-hwmon. 559 560config SENSORS_I5K_AMB 561 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 562 depends on PCI 563 help 564 If you say yes here you get support for FB-DIMM AMB temperature 565 monitoring chips on systems with the Intel 5000 series chipset. 566 567 This driver can also be built as a module. If so, the module 568 will be called i5k_amb. 569 570config SENSORS_SPARX5 571 tristate "Sparx5 SoC temperature sensor" 572 depends on ARCH_SPARX5 || COMPILE_TEST 573 help 574 If you say yes here you get support for temperature monitoring 575 with the Microchip Sparx5 SoC. 576 577 This driver can also be built as a module. If so, the module 578 will be called sparx5-temp. 579 580config SENSORS_F71805F 581 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 582 depends on !PPC 583 help 584 If you say yes here you get support for hardware monitoring 585 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 586 Super-I/O chips. 587 588 This driver can also be built as a module. If so, the module 589 will be called f71805f. 590 591config SENSORS_F71882FG 592 tristate "Fintek F71882FG and compatibles" 593 depends on !PPC 594 help 595 If you say yes here you get support for hardware monitoring 596 features of many Fintek Super-I/O (LPC) chips. The currently 597 supported chips are: 598 F71808E/A 599 F71858FG 600 F71862FG 601 F71863FG 602 F71869F/E/A 603 F71882FG 604 F71883FG 605 F71889FG/ED/A 606 F8000 607 F81801U 608 F81865F 609 610 This driver can also be built as a module. If so, the module 611 will be called f71882fg. 612 613config SENSORS_F75375S 614 tristate "Fintek F75375S/SP, F75373 and F75387" 615 depends on I2C 616 help 617 If you say yes here you get support for hardware monitoring 618 features of the Fintek F75375S/SP, F75373 and F75387 619 620 This driver can also be built as a module. If so, the module 621 will be called f75375s. 622 623config SENSORS_GSC 624 tristate "Gateworks System Controller ADC" 625 depends on MFD_GATEWORKS_GSC 626 help 627 Support for the Gateworks System Controller A/D converters. 628 629 To compile this driver as a module, choose M here: 630 the module will be called gsc-hwmon. 631 632config SENSORS_MC13783_ADC 633 tristate "Freescale MC13783/MC13892 ADC" 634 depends on MFD_MC13XXX 635 help 636 Support for the A/D converter on MC13783 and MC13892 PMIC. 637 638config SENSORS_FSCHMD 639 tristate "Fujitsu Siemens Computers sensor chips" 640 depends on (X86 || COMPILE_TEST) && I2C 641 help 642 If you say yes here you get support for the following Fujitsu 643 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 644 Heimdall, Heracles, Hades and Syleus including support for the 645 integrated watchdog. 646 647 This is a merged driver for FSC sensor chips replacing the fscpos, 648 fscscy and fscher drivers and adding support for several other FSC 649 sensor chips. 650 651 This driver can also be built as a module. If so, the module 652 will be called fschmd. 653 654config SENSORS_FTSTEUTATES 655 tristate "Fujitsu Technology Solutions sensor chip Teutates" 656 depends on I2C && WATCHDOG 657 select WATCHDOG_CORE 658 help 659 If you say yes here you get support for the Fujitsu Technology 660 Solutions (FTS) sensor chip "Teutates" including support for 661 the integrated watchdog. 662 663 This driver can also be built as a module. If so, the module 664 will be called ftsteutates. 665 666config SENSORS_GL518SM 667 tristate "Genesys Logic GL518SM" 668 depends on I2C 669 help 670 If you say yes here you get support for Genesys Logic GL518SM 671 sensor chips. 672 673 This driver can also be built as a module. If so, the module 674 will be called gl518sm. 675 676config SENSORS_GL520SM 677 tristate "Genesys Logic GL520SM" 678 depends on I2C 679 select HWMON_VID 680 help 681 If you say yes here you get support for Genesys Logic GL520SM 682 sensor chips. 683 684 This driver can also be built as a module. If so, the module 685 will be called gl520sm. 686 687config SENSORS_G760A 688 tristate "GMT G760A" 689 depends on I2C 690 help 691 If you say yes here you get support for Global Mixed-mode 692 Technology Inc G760A fan speed PWM controller chips. 693 694 This driver can also be built as a module. If so, the module 695 will be called g760a. 696 697config SENSORS_G762 698 tristate "GMT G762 and G763" 699 depends on I2C 700 help 701 If you say yes here you get support for Global Mixed-mode 702 Technology Inc G762 and G763 fan speed PWM controller chips. 703 704 This driver can also be built as a module. If so, the module 705 will be called g762. 706 707config SENSORS_GPIO_FAN 708 tristate "GPIO fan" 709 depends on OF_GPIO 710 depends on GPIOLIB || COMPILE_TEST 711 depends on THERMAL || THERMAL=n 712 help 713 If you say yes here you get support for fans connected to GPIO lines. 714 715 This driver can also be built as a module. If so, the module 716 will be called gpio-fan. 717 718config SENSORS_GXP_FAN_CTRL 719 tristate "HPE GXP fan controller" 720 depends on ARCH_HPE_GXP || COMPILE_TEST 721 help 722 If you say yes here you get support for GXP fan control functionality. 723 724 The GXP controls fan function via the CPLD through the use of PWM 725 registers. This driver reports status and pwm setting of the fans. 726 727config SENSORS_HIH6130 728 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 729 depends on I2C 730 help 731 If you say yes here you get support for Honeywell Humidicon 732 HIH-6130 and HIH-6131 Humidicon humidity sensors. 733 734 This driver can also be built as a module. If so, the module 735 will be called hih6130. 736 737config SENSORS_HS3001 738 tristate "Renesas HS3001 humidity and temperature sensors" 739 depends on I2C 740 help 741 If you say yes here you get support for the Renesas HS3001, 742 to HS3004 humidity and temperature sensors. 743 744 This driver can also be built as a module. If so, the module 745 will be called hs3001. 746 747config SENSORS_IBMAEM 748 tristate "IBM Active Energy Manager temperature/power sensors and control" 749 select IPMI_SI 750 depends on IPMI_HANDLER 751 help 752 If you say yes here you get support for the temperature and 753 power sensors and capping hardware in various IBM System X 754 servers that support Active Energy Manager. This includes 755 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 756 and certain HC10/HS2x/LS2x/QS2x blades. 757 758 This driver can also be built as a module. If so, the module 759 will be called ibmaem. 760 761config SENSORS_IBMPEX 762 tristate "IBM PowerExecutive temperature/power sensors" 763 select IPMI_SI 764 depends on IPMI_HANDLER 765 help 766 If you say yes here you get support for the temperature and 767 power sensors in various IBM System X servers that support 768 PowerExecutive. So far this includes the x3350, x3550, x3650, 769 x3655, and x3755; the x3800, x3850, and x3950 models that have 770 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 771 772 This driver can also be built as a module. If so, the module 773 will be called ibmpex. 774 775config SENSORS_IBMPOWERNV 776 tristate "IBM POWERNV platform sensors" 777 depends on PPC_POWERNV 778 default y 779 help 780 If you say yes here you get support for the temperature/fan/power 781 sensors on your PowerNV platform. 782 783 This driver can also be built as a module. If so, the module 784 will be called ibmpowernv. 785 786config SENSORS_IIO_HWMON 787 tristate "Hwmon driver that uses channels specified via iio maps" 788 depends on IIO 789 help 790 This is a platform driver that in combination with a suitable 791 map allows IIO devices to provide basic hwmon functionality 792 for those channels specified in the map. This map can be provided 793 either via platform data or the device tree bindings. 794 795config SENSORS_I5500 796 tristate "Intel 5500/5520/X58 temperature sensor" 797 depends on X86 && PCI 798 help 799 If you say yes here you get support for the temperature 800 sensor inside the Intel 5500, 5520 and X58 chipsets. 801 802 This driver can also be built as a module. If so, the module 803 will be called i5500_temp. 804 805config SENSORS_CORETEMP 806 tristate "Intel Core/Core2/Atom temperature sensor" 807 depends on X86 808 help 809 If you say yes here you get support for the temperature 810 sensor inside your CPU. Most of the family 6 CPUs 811 are supported. Check Documentation/hwmon/coretemp.rst for details. 812 813config SENSORS_IT87 814 tristate "ITE IT87xx and compatibles" 815 depends on !PPC 816 select HWMON_VID 817 help 818 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 819 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 820 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 821 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 822 clone. 823 824 This driver can also be built as a module. If so, the module 825 will be called it87. 826 827config SENSORS_JC42 828 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 829 depends on I2C 830 select REGMAP_I2C 831 help 832 If you say yes here, you get support for JEDEC JC42.4 compliant 833 temperature sensors, which are used on many DDR3 memory modules for 834 mobile devices and servers. Support will include, but not be limited 835 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 836 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 837 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 838 839 This driver can also be built as a module. If so, the module 840 will be called jc42. 841 842config SENSORS_POWERZ 843 tristate "ChargerLAB POWER-Z USB-C tester" 844 depends on USB 845 help 846 If you say yes here you get support for ChargerLAB POWER-Z series of 847 USB-C charging testers. 848 849 This driver can also be built as a module. If so, the module 850 will be called powerz. 851 852config SENSORS_POWR1220 853 tristate "Lattice POWR1220 Power Monitoring" 854 depends on I2C 855 help 856 If you say yes here you get access to the hardware monitoring 857 functions of the Lattice POWR1220 isp Power Supply Monitoring, 858 Sequencing and Margining Controller. 859 860 This driver can also be built as a module. If so, the module 861 will be called powr1220. 862 863config SENSORS_LAN966X 864 tristate "Microchip LAN966x Hardware Monitoring" 865 depends on SOC_LAN966 || COMPILE_TEST 866 select REGMAP 867 select POLYNOMIAL 868 help 869 If you say yes here you get support for temperature monitoring 870 on the Microchip LAN966x SoC. 871 872 This driver can also be built as a module. If so, the module 873 will be called lan966x-hwmon. 874 875config SENSORS_LINEAGE 876 tristate "Lineage Compact Power Line Power Entry Module" 877 depends on I2C 878 help 879 If you say yes here you get support for the Lineage Compact Power Line 880 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 881 CP2000DC, CP2725, and others. 882 883 This driver can also be built as a module. If so, the module 884 will be called lineage-pem. 885 886config SENSORS_LOCHNAGAR 887 tristate "Lochnagar Hardware Monitor" 888 depends on MFD_LOCHNAGAR 889 help 890 If you say yes here you get support for Lochnagar 2 temperature, 891 voltage and current sensors abilities. 892 893 This driver can also be built as a module. If so, the module 894 will be called lochnagar-hwmon. 895 896config SENSORS_LTC2945 897 tristate "Linear Technology LTC2945" 898 depends on I2C 899 select REGMAP_I2C 900 help 901 If you say yes here you get support for Linear Technology LTC2945 902 I2C System Monitor. 903 904 This driver can also be built as a module. If so, the module will 905 be called ltc2945. 906 907config SENSORS_LTC2947 908 tristate 909 910config SENSORS_LTC2947_I2C 911 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 912 depends on I2C 913 select REGMAP_I2C 914 select SENSORS_LTC2947 915 help 916 If you say yes here you get support for Linear Technology LTC2947 917 I2C High Precision Power and Energy Monitor 918 919 This driver can also be built as a module. If so, the module will 920 be called ltc2947-i2c. 921 922config SENSORS_LTC2947_SPI 923 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 924 depends on SPI_MASTER 925 select REGMAP_SPI 926 select SENSORS_LTC2947 927 help 928 If you say yes here you get support for Linear Technology LTC2947 929 SPI High Precision Power and Energy Monitor 930 931 This driver can also be built as a module. If so, the module will 932 be called ltc2947-spi. 933 934config SENSORS_LTC2990 935 tristate "Linear Technology LTC2990" 936 depends on I2C 937 help 938 If you say yes here you get support for Linear Technology LTC2990 939 I2C System Monitor. The LTC2990 supports a combination of voltage, 940 current and temperature monitoring. 941 942 This driver can also be built as a module. If so, the module will 943 be called ltc2990. 944 945config SENSORS_LTC2991 946 tristate "Analog Devices LTC2991" 947 depends on I2C 948 help 949 If you say yes here you get support for Analog Devices LTC2991 950 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 951 supports a combination of voltage, current and temperature monitoring. 952 953 This driver can also be built as a module. If so, the module will 954 be called ltc2991. 955 956config SENSORS_LTC2992 957 tristate "Linear Technology LTC2992" 958 depends on I2C 959 depends on GPIOLIB 960 help 961 If you say yes here you get support for Linear Technology LTC2992 962 I2C System Monitor. The LTC2992 measures current, voltage, and 963 power of two supplies. 964 965 This driver can also be built as a module. If so, the module will 966 be called ltc2992. 967 968config SENSORS_LTC4151 969 tristate "Linear Technology LTC4151" 970 depends on I2C 971 help 972 If you say yes here you get support for Linear Technology LTC4151 973 High Voltage I2C Current and Voltage Monitor interface. 974 975 This driver can also be built as a module. If so, the module will 976 be called ltc4151. 977 978config SENSORS_LTC4215 979 tristate "Linear Technology LTC4215" 980 depends on I2C 981 help 982 If you say yes here you get support for Linear Technology LTC4215 983 Hot Swap Controller I2C interface. 984 985 This driver can also be built as a module. If so, the module will 986 be called ltc4215. 987 988config SENSORS_LTC4222 989 tristate "Linear Technology LTC4222" 990 depends on I2C 991 select REGMAP_I2C 992 help 993 If you say yes here you get support for Linear Technology LTC4222 994 Dual Hot Swap Controller I2C interface. 995 996 This driver can also be built as a module. If so, the module will 997 be called ltc4222. 998 999config SENSORS_LTC4245 1000 tristate "Linear Technology LTC4245" 1001 depends on I2C 1002 help 1003 If you say yes here you get support for Linear Technology LTC4245 1004 Multiple Supply Hot Swap Controller I2C interface. 1005 1006 This driver can also be built as a module. If so, the module will 1007 be called ltc4245. 1008 1009config SENSORS_LTC4260 1010 tristate "Linear Technology LTC4260" 1011 depends on I2C 1012 select REGMAP_I2C 1013 help 1014 If you say yes here you get support for Linear Technology LTC4260 1015 Positive Voltage Hot Swap Controller I2C interface. 1016 1017 This driver can also be built as a module. If so, the module will 1018 be called ltc4260. 1019 1020config SENSORS_LTC4261 1021 tristate "Linear Technology LTC4261" 1022 depends on I2C 1023 help 1024 If you say yes here you get support for Linear Technology LTC4261 1025 Negative Voltage Hot Swap Controller I2C interface. 1026 1027 This driver can also be built as a module. If so, the module will 1028 be called ltc4261. 1029 1030config SENSORS_LTQ_CPUTEMP 1031 bool "Lantiq cpu temperature sensor driver" 1032 depends on SOC_XWAY 1033 help 1034 If you say yes here you get support for the temperature 1035 sensor inside your CPU. 1036 1037config SENSORS_MAX1111 1038 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1039 depends on SPI_MASTER 1040 help 1041 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1042 ADC chips. 1043 1044 This driver can also be built as a module. If so, the module 1045 will be called max1111. 1046 1047config SENSORS_MAX127 1048 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1049 depends on I2C 1050 help 1051 Say y here to support Maxim's MAX127 DAS chips. 1052 1053 This driver can also be built as a module. If so, the module 1054 will be called max127. 1055 1056config SENSORS_MAX16065 1057 tristate "Maxim MAX16065 System Manager and compatibles" 1058 depends on I2C 1059 help 1060 If you say yes here you get support for hardware monitoring 1061 capabilities of the following Maxim System Manager chips. 1062 MAX16065 1063 MAX16066 1064 MAX16067 1065 MAX16068 1066 MAX16070 1067 MAX16071 1068 1069 This driver can also be built as a module. If so, the module 1070 will be called max16065. 1071 1072config SENSORS_MAX1619 1073 tristate "Maxim MAX1619 sensor chip" 1074 depends on I2C 1075 help 1076 If you say yes here you get support for MAX1619 sensor chip. 1077 1078 This driver can also be built as a module. If so, the module 1079 will be called max1619. 1080 1081config SENSORS_MAX1668 1082 tristate "Maxim MAX1668 and compatibles" 1083 depends on I2C 1084 help 1085 If you say yes here you get support for MAX1668, MAX1989 and 1086 MAX1805 chips. 1087 1088 This driver can also be built as a module. If so, the module 1089 will be called max1668. 1090 1091config SENSORS_MAX197 1092 tristate "Maxim MAX197 and compatibles" 1093 help 1094 Support for the Maxim MAX197 A/D converter. 1095 Support will include, but not be limited to, MAX197, and MAX199. 1096 1097 This driver can also be built as a module. If so, the module 1098 will be called max197. 1099 1100config SENSORS_MAX31722 1101 tristate "MAX31722 temperature sensor" 1102 depends on SPI 1103 help 1104 Support for the Maxim Integrated MAX31722/MAX31723 digital 1105 thermometers/thermostats operating over an SPI interface. 1106 1107 This driver can also be built as a module. If so, the module 1108 will be called max31722. 1109 1110config SENSORS_MAX31730 1111 tristate "MAX31730 temperature sensor" 1112 depends on I2C 1113 help 1114 Support for the Maxim Integrated MAX31730 3-Channel Remote 1115 Temperature Sensor. 1116 1117 This driver can also be built as a module. If so, the module 1118 will be called max31730. 1119 1120config SENSORS_MAX31760 1121 tristate "MAX31760 fan speed controller" 1122 depends on I2C 1123 select REGMAP_I2C 1124 help 1125 Support for the Analog Devices MAX31760 Precision Fan-Speed 1126 Controller. MAX31760 integrates temperature sensing along with 1127 precision PWM fan control. 1128 1129 This driver can also be built as a module. If so, the module 1130 will be called max31760. 1131 1132config MAX31827 1133 tristate "MAX31827 low-power temperature switch and similar devices" 1134 depends on I2C 1135 select REGMAP_I2C 1136 help 1137 If you say yes here you get support for MAX31827, MAX31828 and 1138 MAX31829 low-power temperature switches and sensors connected with I2C. 1139 1140 This driver can also be built as a module. If so, the module 1141 will be called max31827. 1142 1143config SENSORS_MAX6620 1144 tristate "Maxim MAX6620 fan controller" 1145 depends on I2C 1146 help 1147 If you say yes here you get support for the MAX6620 1148 fan controller. 1149 1150 This driver can also be built as a module. If so, the module 1151 will be called max6620. 1152 1153config SENSORS_MAX6621 1154 tristate "Maxim MAX6621 sensor chip" 1155 depends on I2C 1156 select REGMAP_I2C 1157 help 1158 If you say yes here you get support for MAX6621 sensor chip. 1159 MAX6621 is a PECI-to-I2C translator provides an efficient, 1160 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1161 It allows reading the temperature from the PECI-compliant 1162 host directly from up to four PECI-enabled CPUs. 1163 1164 This driver can also be built as a module. If so, the module 1165 will be called max6621. 1166 1167config SENSORS_MAX6639 1168 tristate "Maxim MAX6639 sensor chip" 1169 depends on I2C 1170 help 1171 If you say yes here you get support for the MAX6639 1172 sensor chips. 1173 1174 This driver can also be built as a module. If so, the module 1175 will be called max6639. 1176 1177config SENSORS_MAX6642 1178 tristate "Maxim MAX6642 sensor chip" 1179 depends on I2C 1180 depends on SENSORS_LM90=n 1181 help 1182 If you say yes here you get support for MAX6642 sensor chip. 1183 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor 1184 with Overtemperature Alarm from Maxim. 1185 1186 This driver can also be built as a module. If so, the module 1187 will be called max6642. 1188 1189config SENSORS_MAX6650 1190 tristate "Maxim MAX6650 sensor chip" 1191 depends on I2C 1192 depends on THERMAL || THERMAL=n 1193 help 1194 If you say yes here you get support for the MAX6650 / MAX6651 1195 sensor chips. 1196 1197 This driver can also be built as a module. If so, the module 1198 will be called max6650. 1199 1200config SENSORS_MAX6697 1201 tristate "Maxim MAX6697 and compatibles" 1202 depends on I2C 1203 help 1204 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1205 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1206 temperature sensor chips. 1207 1208 This driver can also be built as a module. If so, the module 1209 will be called max6697. 1210 1211config SENSORS_MAX31790 1212 tristate "Maxim MAX31790 sensor chip" 1213 depends on I2C 1214 help 1215 If you say yes here you get support for 6-Channel PWM-Output 1216 Fan RPM Controller. 1217 1218 This driver can also be built as a module. If so, the module 1219 will be called max31790. 1220 1221config SENSORS_MC34VR500 1222 tristate "NXP MC34VR500 hardware monitoring driver" 1223 depends on I2C 1224 help 1225 If you say yes here you get support for the temperature and input 1226 voltage sensors of the NXP MC34VR500. 1227 1228config SENSORS_MCP3021 1229 tristate "Microchip MCP3021 and compatibles" 1230 depends on I2C 1231 help 1232 If you say yes here you get support for MCP3021 and MCP3221. 1233 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1234 with 12-bit resolution. 1235 1236 This driver can also be built as a module. If so, the module 1237 will be called mcp3021. 1238 1239config SENSORS_MLXREG_FAN 1240 tristate "Mellanox FAN driver" 1241 depends on MELLANOX_PLATFORM 1242 imply THERMAL 1243 select REGMAP 1244 help 1245 This option enables support for the FAN control on the Mellanox 1246 Ethernet and InfiniBand switches. The driver can be activated by the 1247 platform device add call. Say Y to enable these. To compile this 1248 driver as a module, choose 'M' here: the module will be called 1249 mlxreg-fan. 1250 1251config SENSORS_TC654 1252 tristate "Microchip TC654/TC655 and compatibles" 1253 depends on I2C 1254 help 1255 If you say yes here you get support for TC654 and TC655. 1256 The TC654 and TC655 are PWM mode fan speed controllers with 1257 FanSense technology for use with brushless DC fans. 1258 1259 This driver can also be built as a module. If so, the module 1260 will be called tc654. 1261 1262config SENSORS_TPS23861 1263 tristate "Texas Instruments TPS23861 PoE PSE" 1264 depends on I2C 1265 select REGMAP_I2C 1266 help 1267 If you say yes here you get support for Texas Instruments 1268 TPS23861 802.3at PoE PSE chips. 1269 1270 This driver can also be built as a module. If so, the module 1271 will be called tps23861. 1272 1273config SENSORS_MENF21BMC_HWMON 1274 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1275 depends on MFD_MENF21BMC 1276 help 1277 Say Y here to include support for the MEN 14F021P00 BMC 1278 hardware monitoring. 1279 1280 This driver can also be built as a module. If so the module 1281 will be called menf21bmc_hwmon. 1282 1283config SENSORS_MR75203 1284 tristate "Moortec Semiconductor MR75203 PVT Controller" 1285 select REGMAP_MMIO 1286 help 1287 If you say yes here you get support for Moortec MR75203 1288 PVT controller. 1289 1290 This driver can also be built as a module. If so, the module 1291 will be called mr75203. 1292 1293config SENSORS_ADCXX 1294 tristate "National Semiconductor ADCxxxSxxx" 1295 depends on SPI_MASTER 1296 help 1297 If you say yes here you get support for the National Semiconductor 1298 ADC<bb><c>S<sss> chip family, where 1299 * bb is the resolution in number of bits (8, 10, 12) 1300 * c is the number of channels (1, 2, 4, 8) 1301 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1302 kSPS and 101 for 1 MSPS) 1303 1304 Examples : ADC081S101, ADC124S501, ... 1305 1306 This driver can also be built as a module. If so, the module 1307 will be called adcxx. 1308 1309config SENSORS_LM63 1310 tristate "National Semiconductor LM63 and compatibles" 1311 depends on I2C 1312 help 1313 If you say yes here you get support for the National 1314 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1315 sensors with integrated fan control. Such chips are found 1316 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1317 others. 1318 1319 This driver can also be built as a module. If so, the module 1320 will be called lm63. 1321 1322config SENSORS_LM70 1323 tristate "National Semiconductor LM70 and compatibles" 1324 depends on SPI_MASTER 1325 help 1326 If you say yes here you get support for the National Semiconductor 1327 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1328 TMP125 digital temperature sensor chips. 1329 1330 This driver can also be built as a module. If so, the module 1331 will be called lm70. 1332 1333config SENSORS_LM73 1334 tristate "National Semiconductor LM73" 1335 depends on I2C 1336 help 1337 If you say yes here you get support for National Semiconductor LM73 1338 sensor chips. 1339 This driver can also be built as a module. If so, the module 1340 will be called lm73. 1341 1342config SENSORS_LM75 1343 tristate "National Semiconductor LM75 and compatibles" 1344 depends on I2C 1345 select REGMAP_I2C 1346 help 1347 If you say yes here you get support for one common type of 1348 temperature sensor chip, with models including: 1349 1350 - Analog Devices ADT75 1351 - Atmel (now Microchip) AT30TS74 1352 - Dallas Semiconductor DS75, DS1775 and DS7505 1353 - Global Mixed-mode Technology (GMT) G751 1354 - Maxim MAX6625 and MAX6626 1355 - Microchip MCP980x 1356 - National Semiconductor LM75, LM75A 1357 - NXP's LM75A 1358 - ST Microelectronics STDS75 1359 - ST Microelectronics STLM75 1360 - TelCom (now Microchip) TCN75 1361 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1362 TMP175, TMP275 1363 1364 This driver supports driver model based binding through board 1365 specific I2C device tables. 1366 1367 It also supports the "legacy" style of driver binding. To use 1368 that with some chips which don't replicate LM75 quirks exactly, 1369 you may need the "force" module parameter. 1370 1371 This driver can also be built as a module. If so, the module 1372 will be called lm75. 1373 1374config SENSORS_LM77 1375 tristate "National Semiconductor LM77" 1376 depends on I2C 1377 help 1378 If you say yes here you get support for National Semiconductor LM77 1379 sensor chips. 1380 1381 This driver can also be built as a module. If so, the module 1382 will be called lm77. 1383 1384config SENSORS_LM78 1385 tristate "National Semiconductor LM78 and compatibles" 1386 depends on I2C 1387 select HWMON_VID 1388 help 1389 If you say yes here you get support for National Semiconductor LM78, 1390 LM78-J and LM79. 1391 1392 This driver can also be built as a module. If so, the module 1393 will be called lm78. 1394 1395config SENSORS_LM80 1396 tristate "National Semiconductor LM80 and LM96080" 1397 depends on I2C 1398 help 1399 If you say yes here you get support for National Semiconductor 1400 LM80 and LM96080 sensor chips. 1401 1402 This driver can also be built as a module. If so, the module 1403 will be called lm80. 1404 1405config SENSORS_LM83 1406 tristate "National Semiconductor LM83 and compatibles" 1407 depends on I2C 1408 select REGMAP 1409 help 1410 If you say yes here you get support for National Semiconductor 1411 LM82 and LM83 sensor chips. 1412 1413 This driver can also be built as a module. If so, the module 1414 will be called lm83. 1415 1416config SENSORS_LM85 1417 tristate "National Semiconductor LM85 and compatibles" 1418 depends on I2C 1419 select HWMON_VID 1420 help 1421 If you say yes here you get support for National Semiconductor LM85 1422 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1423 EMC6D101, EMC6D102, and EMC6D103. 1424 1425 This driver can also be built as a module. If so, the module 1426 will be called lm85. 1427 1428config SENSORS_LM87 1429 tristate "National Semiconductor LM87 and compatibles" 1430 depends on I2C 1431 select HWMON_VID 1432 help 1433 If you say yes here you get support for National Semiconductor LM87 1434 and Analog Devices ADM1024 sensor chips. 1435 1436 This driver can also be built as a module. If so, the module 1437 will be called lm87. 1438 1439config SENSORS_LM90 1440 tristate "National Semiconductor LM90 and compatibles" 1441 depends on I2C 1442 help 1443 If you say yes here you get support for National Semiconductor LM84, 1444 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1445 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1446 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1447 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1448 MAX6696, 1449 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1450 Winbond/Nuvoton W83L771W/G/AWG/ASG, 1451 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1452 sensor chips. 1453 1454 This driver can also be built as a module. If so, the module 1455 will be called lm90. 1456 1457config SENSORS_LM92 1458 tristate "National Semiconductor LM92 and compatibles" 1459 depends on I2C 1460 help 1461 If you say yes here you get support for National Semiconductor LM92 1462 and Maxim MAX6635 sensor chips. 1463 1464 This driver can also be built as a module. If so, the module 1465 will be called lm92. 1466 1467config SENSORS_LM93 1468 tristate "National Semiconductor LM93 and compatibles" 1469 depends on I2C 1470 select HWMON_VID 1471 help 1472 If you say yes here you get support for National Semiconductor LM93, 1473 LM94, and compatible sensor chips. 1474 1475 This driver can also be built as a module. If so, the module 1476 will be called lm93. 1477 1478config SENSORS_LM95234 1479 tristate "National Semiconductor LM95234 and compatibles" 1480 depends on I2C 1481 help 1482 If you say yes here you get support for the LM95233 and LM95234 1483 temperature sensor chips. 1484 1485 This driver can also be built as a module. If so, the module 1486 will be called lm95234. 1487 1488config SENSORS_LM95241 1489 tristate "National Semiconductor LM95241 and compatibles" 1490 depends on I2C 1491 help 1492 If you say yes here you get support for LM95231 and LM95241 sensor 1493 chips. 1494 1495 This driver can also be built as a module. If so, the module 1496 will be called lm95241. 1497 1498config SENSORS_LM95245 1499 tristate "National Semiconductor LM95245 and compatibles" 1500 depends on I2C 1501 select REGMAP_I2C 1502 help 1503 If you say yes here you get support for LM95235 and LM95245 1504 temperature sensor chips. 1505 1506 This driver can also be built as a module. If so, the module 1507 will be called lm95245. 1508 1509config SENSORS_PC87360 1510 tristate "National Semiconductor PC87360 family" 1511 depends on !PPC 1512 select HWMON_VID 1513 help 1514 If you say yes here you get access to the hardware monitoring 1515 functions of the National Semiconductor PC8736x Super-I/O chips. 1516 The PC87360, PC87363 and PC87364 only have fan monitoring and 1517 control. The PC87365 and PC87366 additionally have voltage and 1518 temperature monitoring. 1519 1520 This driver can also be built as a module. If so, the module 1521 will be called pc87360. 1522 1523config SENSORS_PC87427 1524 tristate "National Semiconductor PC87427" 1525 depends on !PPC 1526 help 1527 If you say yes here you get access to the hardware monitoring 1528 functions of the National Semiconductor PC87427 Super-I/O chip. 1529 The chip has two distinct logical devices, one for fan speed 1530 monitoring and control, and one for voltage and temperature 1531 monitoring. Fan speed monitoring and control are supported, as 1532 well as temperature monitoring. Voltages aren't supported yet. 1533 1534 This driver can also be built as a module. If so, the module 1535 will be called pc87427. 1536 1537config SENSORS_NTC_THERMISTOR 1538 tristate "NTC thermistor support" 1539 depends on IIO 1540 depends on THERMAL || !THERMAL_OF 1541 help 1542 This driver supports NTC thermistors sensor reading and its 1543 interpretation. The driver can also monitor the temperature and 1544 send notifications about the temperature. 1545 1546 Currently, this driver supports 1547 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1548 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1549 B57891S0103 from EPCOS. 1550 1551 This driver can also be built as a module. If so, the module 1552 will be called ntc-thermistor. 1553 1554config SENSORS_NCT6683 1555 tristate "Nuvoton NCT6683D" 1556 depends on !PPC 1557 help 1558 If you say yes here you get support for the hardware monitoring 1559 functionality of the Nuvoton NCT6683D eSIO chip. 1560 1561 This driver can also be built as a module. If so, the module 1562 will be called nct6683. 1563 1564config SENSORS_NCT6775_CORE 1565 tristate 1566 select REGMAP 1567 help 1568 This module contains common code shared by the platform and 1569 i2c versions of the nct6775 driver; it is not useful on its 1570 own. 1571 1572 If built as a module, the module will be called 1573 nct6775-core. 1574 1575config SENSORS_NCT6775 1576 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1577 depends on !PPC 1578 depends on ACPI || ACPI=n 1579 select HWMON_VID 1580 select SENSORS_NCT6775_CORE 1581 help 1582 If you say yes here you get support for the hardware monitoring 1583 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1584 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1585 Super-I/O chips. This driver replaces the w83627ehf driver for 1586 NCT6775F and NCT6776F. 1587 1588 This driver can also be built as a module. If so, the module 1589 will be called nct6775. 1590 1591config SENSORS_NCT6775_I2C 1592 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1593 depends on I2C 1594 select REGMAP_I2C 1595 select SENSORS_NCT6775_CORE 1596 help 1597 If you say yes here you get support for the hardware monitoring 1598 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1599 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1600 Super-I/O chips via their I2C interface. 1601 1602 If you're not building a kernel for a BMC, this is probably 1603 not the driver you want (see CONFIG_SENSORS_NCT6775). 1604 1605 This driver can also be built as a module. If so, the module 1606 will be called nct6775-i2c. 1607 1608config SENSORS_NCT7802 1609 tristate "Nuvoton NCT7802Y" 1610 depends on I2C 1611 select REGMAP_I2C 1612 help 1613 If you say yes here you get support for the Nuvoton NCT7802Y 1614 hardware monitoring chip. 1615 1616 This driver can also be built as a module. If so, the module 1617 will be called nct7802. 1618 1619config SENSORS_NCT7904 1620 tristate "Nuvoton NCT7904" 1621 depends on I2C && WATCHDOG 1622 select WATCHDOG_CORE 1623 help 1624 If you say yes here you get support for the Nuvoton NCT7904 1625 hardware monitoring chip, including manual fan speed control 1626 and support for the integrated watchdog. 1627 1628 This driver can also be built as a module. If so, the module 1629 will be called nct7904. 1630 1631config SENSORS_NPCM7XX 1632 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1633 imply THERMAL 1634 help 1635 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1636 and Fan controllers. 1637 1638 This driver can also be built as a module. If so, the module 1639 will be called npcm750-pwm-fan. 1640 1641config SENSORS_NSA320 1642 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1643 depends on GPIOLIB && OF 1644 depends on MACH_KIRKWOOD || COMPILE_TEST 1645 help 1646 If you say yes here you get support for hardware monitoring 1647 for the ZyXEL NSA320 Media Server and other compatible devices 1648 (probably the NSA325 and some NSA310 variants). 1649 1650 The sensor data is taken from a Holtek HT46R065 microcontroller 1651 connected to GPIO lines. 1652 1653 This driver can also be built as a module. If so, the module 1654 will be called nsa320-hwmon. 1655 1656config SENSORS_NZXT_KRAKEN2 1657 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1658 depends on USB_HID 1659 help 1660 If you say yes here you get support for hardware monitoring for the 1661 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1662 1663 This driver can also be built as a module. If so, the module 1664 will be called nzxt-kraken2. 1665 1666config SENSORS_NZXT_SMART2 1667 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1668 depends on USB_HID 1669 help 1670 If you say yes here you get support for hardware monitoring for the 1671 NZXT RGB & Fan Controller/Smart Device v2. 1672 1673 This driver can also be built as a module. If so, the module 1674 will be called nzxt-smart2. 1675 1676source "drivers/hwmon/occ/Kconfig" 1677 1678config SENSORS_OXP 1679 tristate "OneXPlayer EC fan control" 1680 depends on ACPI 1681 depends on X86 1682 help 1683 If you say yes here you get support for fan readings and control over 1684 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant 1685 boards are supported. 1686 1687 Can also be built as a module. In that case it will be called oxp-sensors. 1688 1689config SENSORS_PCF8591 1690 tristate "Philips PCF8591 ADC/DAC" 1691 depends on I2C 1692 help 1693 If you say yes here you get support for Philips PCF8591 4-channel 1694 ADC, 1-channel DAC chips. 1695 1696 This driver can also be built as a module. If so, the module 1697 will be called pcf8591. 1698 1699 These devices are hard to detect and rarely found on mainstream 1700 hardware. If unsure, say N. 1701 1702source "drivers/hwmon/peci/Kconfig" 1703 1704source "drivers/hwmon/pmbus/Kconfig" 1705 1706config SENSORS_PWM_FAN 1707 tristate "PWM fan" 1708 depends on (PWM && OF) || COMPILE_TEST 1709 depends on THERMAL || THERMAL=n 1710 help 1711 If you say yes here you get support for fans connected to PWM lines. 1712 The driver uses the generic PWM interface, thus it will work on a 1713 variety of SoCs. 1714 1715 This driver can also be built as a module. If so, the module 1716 will be called pwm-fan. 1717 1718config SENSORS_RASPBERRYPI_HWMON 1719 tristate "Raspberry Pi voltage monitor" 1720 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1721 help 1722 If you say yes here you get support for voltage sensor on the 1723 Raspberry Pi. 1724 1725 This driver can also be built as a module. If so, the module 1726 will be called raspberrypi-hwmon. 1727 1728config SENSORS_SL28CPLD 1729 tristate "Kontron sl28cpld hardware monitoring driver" 1730 depends on MFD_SL28CPLD || COMPILE_TEST 1731 help 1732 If you say yes here you get support for the fan supervisor of the 1733 sl28cpld board management controller. 1734 1735 This driver can also be built as a module. If so, the module 1736 will be called sl28cpld-hwmon. 1737 1738config SENSORS_SBTSI 1739 tristate "Emulated SB-TSI temperature sensor" 1740 depends on I2C 1741 help 1742 If you say yes here you get support for emulated temperature 1743 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1744 1745 This driver can also be built as a module. If so, the module will 1746 be called sbtsi_temp. 1747 1748config SENSORS_SBRMI 1749 tristate "Emulated SB-RMI sensor" 1750 depends on I2C 1751 help 1752 If you say yes here you get support for emulated RMI 1753 sensors on AMD SoCs with APML interface connected to a BMC device. 1754 1755 This driver can also be built as a module. If so, the module will 1756 be called sbrmi. 1757 1758config SENSORS_SHT15 1759 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1760 depends on GPIOLIB || COMPILE_TEST 1761 select BITREVERSE 1762 help 1763 If you say yes here you get support for the Sensiron SHT10, SHT11, 1764 SHT15, SHT71, SHT75 humidity and temperature sensors. 1765 1766 This driver can also be built as a module. If so, the module 1767 will be called sht15. 1768 1769config SENSORS_SHT21 1770 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1771 depends on I2C 1772 help 1773 If you say yes here you get support for the Sensiron SHT21, SHT25 1774 humidity and temperature sensors. 1775 1776 This driver can also be built as a module. If so, the module 1777 will be called sht21. 1778 1779config SENSORS_SHT3x 1780 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1781 depends on I2C 1782 select CRC8 1783 help 1784 If you say yes here you get support for the Sensiron SHT30 and SHT31 1785 humidity and temperature sensors. 1786 1787 This driver can also be built as a module. If so, the module 1788 will be called sht3x. 1789 1790config SENSORS_SHT4x 1791 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1792 depends on I2C 1793 select CRC8 1794 help 1795 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1796 SHT45 humidity and temperature sensors. 1797 1798 This driver can also be built as a module. If so, the module 1799 will be called sht4x. 1800 1801config SENSORS_SHTC1 1802 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1803 depends on I2C 1804 help 1805 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1806 and SHTC3 humidity and temperature sensors. 1807 1808 This driver can also be built as a module. If so, the module 1809 will be called shtc1. 1810 1811config SENSORS_SIS5595 1812 tristate "Silicon Integrated Systems Corp. SiS5595" 1813 depends on PCI 1814 help 1815 If you say yes here you get support for the integrated sensors in 1816 SiS5595 South Bridges. 1817 1818 This driver can also be built as a module. If so, the module 1819 will be called sis5595. 1820 1821config SENSORS_SY7636A 1822 tristate "Silergy SY7636A" 1823 depends on MFD_SY7636A 1824 help 1825 If you say yes here you get support for the thermistor readout of 1826 the Silergy SY7636A PMIC. 1827 1828 This driver can also be built as a module. If so, the module 1829 will be called sy7636a-hwmon. 1830 1831config SENSORS_DME1737 1832 tristate "SMSC DME1737, SCH311x and compatibles" 1833 depends on I2C && !PPC 1834 select HWMON_VID 1835 help 1836 If you say yes here you get support for the hardware monitoring 1837 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1838 Asus A8000 Super-I/O chips. 1839 1840 This driver can also be built as a module. If so, the module 1841 will be called dme1737. 1842 1843config SENSORS_EMC1403 1844 tristate "SMSC EMC1403/23 thermal sensor" 1845 depends on I2C 1846 select REGMAP_I2C 1847 help 1848 If you say yes here you get support for the SMSC EMC1403/23 1849 temperature monitoring chip. 1850 1851 Threshold values can be configured using sysfs. 1852 Data from the different diodes are accessible via sysfs. 1853 1854config SENSORS_EMC2103 1855 tristate "SMSC EMC2103" 1856 depends on I2C 1857 help 1858 If you say yes here you get support for the temperature 1859 and fan sensors of the SMSC EMC2103 chips. 1860 1861 This driver can also be built as a module. If so, the module 1862 will be called emc2103. 1863 1864config SENSORS_EMC2305 1865 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 1866 depends on I2C 1867 imply THERMAL 1868 help 1869 If you say yes here you get support for the Microchip EMC2305 1870 fan controller chips. 1871 The Microchip EMC2305 is a fan controller for up to 5 fans. 1872 Fan rotation speeds are reported in RPM. 1873 1874 This driver can also be built as a module. If so, the module 1875 will be called emc2305. 1876 1877config SENSORS_EMC6W201 1878 tristate "SMSC EMC6W201" 1879 depends on I2C 1880 help 1881 If you say yes here you get support for the SMSC EMC6W201 1882 hardware monitoring chip. 1883 1884 This driver can also be built as a module. If so, the module 1885 will be called emc6w201. 1886 1887config SENSORS_SMSC47M1 1888 tristate "SMSC LPC47M10x and compatibles" 1889 depends on !PPC 1890 help 1891 If you say yes here you get support for the integrated fan 1892 monitoring and control capabilities of the SMSC LPC47B27x, 1893 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 1894 LPC47M192, LPC47M292 and LPC47M997 chips. 1895 1896 The temperature and voltage sensor features of the LPC47M15x, 1897 LPC47M192, LPC47M292 and LPC47M997 are supported by another 1898 driver, select also "SMSC LPC47M192 and compatibles" below for 1899 those. 1900 1901 This driver can also be built as a module. If so, the module 1902 will be called smsc47m1. 1903 1904config SENSORS_SMSC47M192 1905 tristate "SMSC LPC47M192 and compatibles" 1906 depends on I2C 1907 select HWMON_VID 1908 help 1909 If you say yes here you get support for the temperature and 1910 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 1911 and LPC47M997 chips. 1912 1913 The fan monitoring and control capabilities of these chips 1914 are supported by another driver, select 1915 "SMSC LPC47M10x and compatibles" above. You need both drivers 1916 if you want fan control and voltage/temperature sensor support. 1917 1918 This driver can also be built as a module. If so, the module 1919 will be called smsc47m192. 1920 1921config SENSORS_SMSC47B397 1922 tristate "SMSC LPC47B397-NC" 1923 depends on !PPC 1924 help 1925 If you say yes here you get support for the SMSC LPC47B397-NC 1926 sensor chip. 1927 1928 This driver can also be built as a module. If so, the module 1929 will be called smsc47b397. 1930 1931config SENSORS_SCH56XX_COMMON 1932 tristate 1933 select REGMAP 1934 1935config SENSORS_SCH5627 1936 tristate "SMSC SCH5627" 1937 depends on !PPC && WATCHDOG 1938 select SENSORS_SCH56XX_COMMON 1939 select WATCHDOG_CORE 1940 help 1941 If you say yes here you get support for the hardware monitoring 1942 features of the SMSC SCH5627 Super-I/O chip including support for 1943 the integrated watchdog. 1944 1945 This driver can also be built as a module. If so, the module 1946 will be called sch5627. 1947 1948config SENSORS_SCH5636 1949 tristate "SMSC SCH5636" 1950 depends on !PPC && WATCHDOG 1951 select SENSORS_SCH56XX_COMMON 1952 select WATCHDOG_CORE 1953 help 1954 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 1955 hardware monitoring solutions, allowing motherboard manufacturers to 1956 create their own custom hwmon solution based upon the SCH5636. 1957 1958 Currently this driver only supports the Fujitsu Theseus SCH5636 based 1959 hwmon solution. Say yes here if you want support for the Fujitsu 1960 Theseus' hardware monitoring features including support for the 1961 integrated watchdog. 1962 1963 This driver can also be built as a module. If so, the module 1964 will be called sch5636. 1965 1966config SENSORS_STTS751 1967 tristate "ST Microelectronics STTS751" 1968 depends on I2C 1969 help 1970 If you say yes here you get support for STTS751 1971 temperature sensor chips. 1972 1973 This driver can also be built as a module. If so, the module 1974 will be called stts751. 1975 1976config SENSORS_SFCTEMP 1977 tristate "Starfive JH71x0 temperature sensor" 1978 depends on ARCH_STARFIVE || COMPILE_TEST 1979 help 1980 If you say yes here you get support for temperature sensor 1981 on the Starfive JH71x0 SoCs. 1982 1983 This driver can also be built as a module. If so, the module 1984 will be called sfctemp. 1985 1986config SENSORS_ADC128D818 1987 tristate "Texas Instruments ADC128D818" 1988 depends on I2C 1989 help 1990 If you say yes here you get support for the Texas Instruments 1991 ADC128D818 System Monitor with Temperature Sensor chip. 1992 1993 This driver can also be built as a module. If so, the module 1994 will be called adc128d818. 1995 1996config SENSORS_ADS7828 1997 tristate "Texas Instruments ADS7828 and compatibles" 1998 depends on I2C 1999 select REGMAP_I2C 2000 help 2001 If you say yes here you get support for Texas Instruments ADS7828 and 2002 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 2003 it is 8-bit on ADS7830. 2004 2005 This driver can also be built as a module. If so, the module 2006 will be called ads7828. 2007 2008config SENSORS_ADS7871 2009 tristate "Texas Instruments ADS7871 A/D converter" 2010 depends on SPI 2011 help 2012 If you say yes here you get support for TI ADS7871 & ADS7870 2013 2014 This driver can also be built as a module. If so, the module 2015 will be called ads7871. 2016 2017config SENSORS_AMC6821 2018 tristate "Texas Instruments AMC6821" 2019 depends on I2C 2020 help 2021 If you say yes here you get support for the Texas Instruments 2022 AMC6821 hardware monitoring chips. 2023 2024 This driver can also be built as a module. If so, the module 2025 will be called amc6821. 2026 2027config SENSORS_INA209 2028 tristate "TI / Burr Brown INA209" 2029 depends on I2C 2030 help 2031 If you say yes here you get support for the TI / Burr Brown INA209 2032 voltage / current / power monitor I2C interface. 2033 2034 This driver can also be built as a module. If so, the module will 2035 be called ina209. 2036 2037config SENSORS_INA2XX 2038 tristate "Texas Instruments INA219 and compatibles" 2039 depends on I2C 2040 select REGMAP_I2C 2041 help 2042 If you say yes here you get support for INA219, INA220, INA226, 2043 INA230, and INA231 power monitor chips. 2044 2045 The INA2xx driver is configured for the default configuration of 2046 the part as described in the datasheet. 2047 Default value for Rshunt is 10 mOhms. 2048 This driver can also be built as a module. If so, the module 2049 will be called ina2xx. 2050 2051config SENSORS_INA238 2052 tristate "Texas Instruments INA238" 2053 depends on I2C 2054 select REGMAP_I2C 2055 help 2056 If you say yes here you get support for the INA238 power monitor 2057 chip. This driver supports voltage, current, power and temperature 2058 measurements as well as alarm configuration. 2059 2060 This driver can also be built as a module. If so, the module 2061 will be called ina238. 2062 2063config SENSORS_INA3221 2064 tristate "Texas Instruments INA3221 Triple Power Monitor" 2065 depends on I2C 2066 select REGMAP_I2C 2067 help 2068 If you say yes here you get support for the TI INA3221 Triple Power 2069 Monitor. 2070 2071 This driver can also be built as a module. If so, the module 2072 will be called ina3221. 2073 2074config SENSORS_TC74 2075 tristate "Microchip TC74" 2076 depends on I2C 2077 help 2078 If you say yes here you get support for Microchip TC74 single 2079 input temperature sensor chips. 2080 2081 This driver can also be built as a module. If so, the module 2082 will be called tc74. 2083 2084config SENSORS_THMC50 2085 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2086 depends on I2C 2087 help 2088 If you say yes here you get support for Texas Instruments THMC50 2089 sensor chips and clones: the Analog Devices ADM1022. 2090 2091 This driver can also be built as a module. If so, the module 2092 will be called thmc50. 2093 2094config SENSORS_TMP102 2095 tristate "Texas Instruments TMP102" 2096 depends on I2C 2097 select REGMAP_I2C 2098 help 2099 If you say yes here you get support for Texas Instruments TMP102 2100 sensor chips. 2101 2102 This driver can also be built as a module. If so, the module 2103 will be called tmp102. 2104 2105config SENSORS_TMP103 2106 tristate "Texas Instruments TMP103" 2107 depends on I2C 2108 select REGMAP_I2C 2109 help 2110 If you say yes here you get support for Texas Instruments TMP103 2111 sensor chips. 2112 2113 This driver can also be built as a module. If so, the module 2114 will be called tmp103. 2115 2116config SENSORS_TMP108 2117 tristate "Texas Instruments TMP108" 2118 depends on I2C 2119 select REGMAP_I2C 2120 help 2121 If you say yes here you get support for Texas Instruments TMP108 2122 sensor chips. 2123 2124 This driver can also be built as a module. If so, the module 2125 will be called tmp108. 2126 2127config SENSORS_TMP401 2128 tristate "Texas Instruments TMP401 and compatibles" 2129 depends on I2C 2130 select REGMAP 2131 help 2132 If you say yes here you get support for Texas Instruments TMP401, 2133 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2134 2135 This driver can also be built as a module. If so, the module 2136 will be called tmp401. 2137 2138config SENSORS_TMP421 2139 tristate "Texas Instruments TMP421 and compatible" 2140 depends on I2C 2141 help 2142 If you say yes here you get support for Texas Instruments TMP421, 2143 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2144 2145 This driver can also be built as a module. If so, the module 2146 will be called tmp421. 2147 2148config SENSORS_TMP464 2149 tristate "Texas Instruments TMP464 and compatible" 2150 depends on I2C 2151 select REGMAP_I2C 2152 help 2153 If you say yes here you get support for Texas Instruments TMP464 2154 and TMP468 temperature sensor chips. 2155 2156 This driver can also be built as a module. If so, the module 2157 will be called tmp464. 2158 2159config SENSORS_TMP513 2160 tristate "Texas Instruments TMP513 and compatibles" 2161 depends on I2C 2162 help 2163 If you say yes here you get support for Texas Instruments TMP512, 2164 and TMP513 temperature and power supply sensor chips. 2165 2166 This driver can also be built as a module. If so, the module 2167 will be called tmp513. 2168 2169config SENSORS_VEXPRESS 2170 tristate "Versatile Express" 2171 depends on VEXPRESS_CONFIG 2172 help 2173 This driver provides support for hardware sensors available on 2174 the ARM Ltd's Versatile Express platform. It can provide wide 2175 range of information like temperature, power, energy. 2176 2177config SENSORS_VIA_CPUTEMP 2178 tristate "VIA CPU temperature sensor" 2179 depends on X86 2180 select HWMON_VID 2181 help 2182 If you say yes here you get support for the temperature 2183 sensor inside your CPU. Supported are all known variants of 2184 the VIA C7 and Nano. 2185 2186config SENSORS_VIA686A 2187 tristate "VIA686A" 2188 depends on PCI 2189 help 2190 If you say yes here you get support for the integrated sensors in 2191 Via 686A/B South Bridges. 2192 2193 This driver can also be built as a module. If so, the module 2194 will be called via686a. 2195 2196config SENSORS_VT1211 2197 tristate "VIA VT1211" 2198 depends on !PPC 2199 select HWMON_VID 2200 help 2201 If you say yes here then you get support for hardware monitoring 2202 features of the VIA VT1211 Super-I/O chip. 2203 2204 This driver can also be built as a module. If so, the module 2205 will be called vt1211. 2206 2207config SENSORS_VT8231 2208 tristate "VIA VT8231" 2209 depends on PCI 2210 select HWMON_VID 2211 help 2212 If you say yes here then you get support for the integrated sensors 2213 in the VIA VT8231 device. 2214 2215 This driver can also be built as a module. If so, the module 2216 will be called vt8231. 2217 2218config SENSORS_W83773G 2219 tristate "Nuvoton W83773G" 2220 depends on I2C 2221 select REGMAP_I2C 2222 help 2223 If you say yes here you get support for the Nuvoton W83773G hardware 2224 monitoring chip. 2225 2226 This driver can also be built as a module. If so, the module 2227 will be called w83773g. 2228 2229config SENSORS_W83781D 2230 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2231 depends on I2C 2232 select HWMON_VID 2233 help 2234 If you say yes here you get support for the Winbond W8378x series 2235 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2236 Asus AS99127F. 2237 2238 This driver can also be built as a module. If so, the module 2239 will be called w83781d. 2240 2241config SENSORS_W83791D 2242 tristate "Winbond W83791D" 2243 depends on I2C 2244 select HWMON_VID 2245 help 2246 If you say yes here you get support for the Winbond W83791D chip. 2247 2248 This driver can also be built as a module. If so, the module 2249 will be called w83791d. 2250 2251config SENSORS_W83792D 2252 tristate "Winbond W83792D" 2253 depends on I2C 2254 help 2255 If you say yes here you get support for the Winbond W83792D chip. 2256 2257 This driver can also be built as a module. If so, the module 2258 will be called w83792d. 2259 2260config SENSORS_W83793 2261 tristate "Winbond W83793" 2262 depends on I2C 2263 select HWMON_VID 2264 help 2265 If you say yes here you get support for the Winbond W83793 2266 hardware monitoring chip, including support for the integrated 2267 watchdog. 2268 2269 This driver can also be built as a module. If so, the module 2270 will be called w83793. 2271 2272config SENSORS_W83795 2273 tristate "Winbond/Nuvoton W83795G/ADG" 2274 depends on I2C 2275 help 2276 If you say yes here you get support for the Winbond W83795G and 2277 W83795ADG hardware monitoring chip, including manual fan speed 2278 control. 2279 2280 This driver can also be built as a module. If so, the module 2281 will be called w83795. 2282 2283config SENSORS_W83795_FANCTRL 2284 bool "Include automatic fan control support" 2285 depends on SENSORS_W83795 2286 help 2287 If you say yes here, support for automatic fan speed control 2288 will be included in the driver. 2289 2290 Please also note that this option will create sysfs attribute 2291 files which may change in the future, so you shouldn't rely 2292 on them being stable. 2293 2294config SENSORS_W83L785TS 2295 tristate "Winbond W83L785TS-S" 2296 depends on I2C 2297 help 2298 If you say yes here you get support for the Winbond W83L785TS-S 2299 sensor chip, which is used on the Asus A7N8X, among other 2300 motherboards. 2301 2302 This driver can also be built as a module. If so, the module 2303 will be called w83l785ts. 2304 2305config SENSORS_W83L786NG 2306 tristate "Winbond W83L786NG, W83L786NR" 2307 depends on I2C 2308 help 2309 If you say yes here you get support for the Winbond W83L786NG 2310 and W83L786NR sensor chips. 2311 2312 This driver can also be built as a module. If so, the module 2313 will be called w83l786ng. 2314 2315config SENSORS_W83627HF 2316 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2317 depends on !PPC 2318 select HWMON_VID 2319 help 2320 If you say yes here you get support for the Winbond W836X7 series 2321 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2322 W83697HF. 2323 2324 This driver can also be built as a module. If so, the module 2325 will be called w83627hf. 2326 2327config SENSORS_W83627EHF 2328 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2329 depends on !PPC 2330 select HWMON_VID 2331 help 2332 If you say yes here you get support for the hardware 2333 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2334 2335 This driver also supports the W83627EHG, which is the lead-free 2336 version of the W83627EHF, and the W83627DHG, which is a similar 2337 chip suited for specific Intel processors that use PECI such as 2338 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2339 version of the W83627DHG (as far as hardware monitoring goes.) 2340 2341 This driver also supports Nuvoton W83667HG and W83667HG-B. 2342 2343 This driver can also be built as a module. If so, the module 2344 will be called w83627ehf. 2345 2346config SENSORS_WM831X 2347 tristate "WM831x PMICs" 2348 depends on MFD_WM831X 2349 help 2350 If you say yes here you get support for the hardware 2351 monitoring functionality of the Wolfson Microelectronics 2352 WM831x series of PMICs. 2353 2354 This driver can also be built as a module. If so, the module 2355 will be called wm831x-hwmon. 2356 2357config SENSORS_WM8350 2358 tristate "Wolfson Microelectronics WM835x" 2359 depends on MFD_WM8350 2360 help 2361 If you say yes here you get support for the hardware 2362 monitoring features of the WM835x series of PMICs. 2363 2364 This driver can also be built as a module. If so, the module 2365 will be called wm8350-hwmon. 2366 2367config SENSORS_ULTRA45 2368 tristate "Sun Ultra45 PIC16F747" 2369 depends on SPARC64 2370 help 2371 This driver provides support for the Ultra45 workstation environmental 2372 sensors. 2373 2374config SENSORS_XGENE 2375 tristate "APM X-Gene SoC hardware monitoring driver" 2376 depends on XGENE_SLIMPRO_MBOX || PCC 2377 help 2378 If you say yes here you get support for the temperature 2379 and power sensors for APM X-Gene SoC. 2380 2381config SENSORS_INTEL_M10_BMC_HWMON 2382 tristate "Intel MAX10 BMC Hardware Monitoring" 2383 depends on MFD_INTEL_M10_BMC_CORE 2384 help 2385 This driver provides support for the hardware monitoring functionality 2386 on Intel MAX10 BMC chip. 2387 2388 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2389 sensors monitor various telemetry data of different components on the 2390 card, e.g. board temperature, FPGA core temperature/voltage/current. 2391 2392if ACPI 2393 2394comment "ACPI drivers" 2395 2396config SENSORS_ACPI_POWER 2397 tristate "ACPI 4.0 power meter" 2398 help 2399 This driver exposes ACPI 4.0 power meters as hardware monitoring 2400 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2401 and a power meter. 2402 2403 To compile this driver as a module, choose M here: 2404 the module will be called acpi_power_meter. 2405 2406config SENSORS_ATK0110 2407 tristate "ASUS ATK0110" 2408 depends on X86 2409 help 2410 If you say yes here you get support for the ACPI hardware 2411 monitoring interface found in many ASUS motherboards. This 2412 driver will provide readings of fans, voltages and temperatures 2413 through the system firmware. 2414 2415 This driver can also be built as a module. If so, the module 2416 will be called asus_atk0110. 2417 2418config SENSORS_ASUS_WMI 2419 tristate "ASUS WMI X370/X470/B450/X399" 2420 depends on ACPI_WMI 2421 help 2422 If you say yes here you get support for the ACPI hardware monitoring 2423 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2424 will provide readings of fans, voltages and temperatures through the system 2425 firmware. 2426 2427 This driver can also be built as a module. If so, the module 2428 will be called asus_wmi_sensors. 2429 2430config SENSORS_ASUS_EC 2431 tristate "ASUS EC Sensors" 2432 depends on X86 2433 help 2434 If you say yes here you get support for the ACPI embedded controller 2435 hardware monitoring interface found in ASUS motherboards. The driver 2436 currently supports B550/X570 boards, although other ASUS boards might 2437 provide this monitoring interface as well. 2438 2439 This driver can also be built as a module. If so, the module 2440 will be called asus_ec_sensors. 2441 2442config SENSORS_HP_WMI 2443 tristate "HP WMI Sensors" 2444 depends on ACPI_WMI 2445 help 2446 If you say yes here you get support for the ACPI hardware monitoring 2447 interface found in HP (and some HP Compaq) business-class computers. 2448 Available sensors vary between systems. Temperature and fan speed 2449 sensors are the most common. 2450 2451 This driver can also be built as a module. If so, the module 2452 will be called hp_wmi_sensors. 2453 2454endif # ACPI 2455 2456endif # HWMON 2457