1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1025 109 tristate "Analog Devices ADM1025 and compatibles" 110 depends on I2C 111 select HWMON_VID 112 help 113 If you say yes here you get support for Analog Devices ADM1025 114 and Philips NE1619 sensor chips. 115 116 This driver can also be built as a module. If so, the module 117 will be called adm1025. 118 119config SENSORS_ADM1026 120 tristate "Analog Devices ADM1026 and compatibles" 121 depends on I2C 122 select HWMON_VID 123 help 124 If you say yes here you get support for Analog Devices ADM1026 125 sensor chip. 126 127 This driver can also be built as a module. If so, the module 128 will be called adm1026. 129 130config SENSORS_ADM1029 131 tristate "Analog Devices ADM1029" 132 depends on I2C 133 help 134 If you say yes here you get support for Analog Devices ADM1029 135 sensor chip. 136 Very rare chip, please let us know you use it. 137 138 This driver can also be built as a module. If so, the module 139 will be called adm1029. 140 141config SENSORS_ADM1031 142 tristate "Analog Devices ADM1031 and compatibles" 143 depends on I2C 144 help 145 If you say yes here you get support for Analog Devices ADM1031 146 and ADM1030 sensor chips. 147 148 This driver can also be built as a module. If so, the module 149 will be called adm1031. 150 151config SENSORS_ADM1177 152 tristate "Analog Devices ADM1177 and compatibles" 153 depends on I2C 154 help 155 If you say yes here you get support for Analog Devices ADM1177 156 sensor chips. 157 158 This driver can also be built as a module. If so, the module 159 will be called adm1177. 160 161config SENSORS_ADM9240 162 tristate "Analog Devices ADM9240 and compatibles" 163 depends on I2C 164 select HWMON_VID 165 select REGMAP_I2C 166 help 167 If you say yes here you get support for Analog Devices ADM9240, 168 Dallas DS1780, National Semiconductor LM81 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm9240. 172 173config SENSORS_ADT7X10 174 tristate 175 select REGMAP 176 help 177 This module contains common code shared by the ADT7310/ADT7320 and 178 ADT7410/ADT7420/ADT7422 temperature monitoring chip drivers. 179 180 If built as a module, the module will be called adt7x10. 181 182config SENSORS_ADT7310 183 tristate "Analog Devices ADT7310/ADT7320" 184 depends on SPI_MASTER 185 select SENSORS_ADT7X10 186 help 187 If you say yes here you get support for the Analog Devices 188 ADT7310 and ADT7320 temperature monitoring chips. 189 190 This driver can also be built as a module. If so, the module 191 will be called adt7310. 192 193config SENSORS_ADT7410 194 tristate "Analog Devices ADT7410/ADT7420/ADT7422" 195 depends on I2C 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7410, ADT7420 and ADT7422 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7410. 203 204config SENSORS_ADT7411 205 tristate "Analog Devices ADT7411" 206 depends on I2C 207 help 208 If you say yes here you get support for the Analog Devices 209 ADT7411 voltage and temperature monitoring chip. 210 211 This driver can also be built as a module. If so, the module 212 will be called adt7411. 213 214config SENSORS_ADT7462 215 tristate "Analog Devices ADT7462" 216 depends on I2C 217 help 218 If you say yes here you get support for the Analog Devices 219 ADT7462 temperature monitoring chips. 220 221 This driver can also be built as a module. If so, the module 222 will be called adt7462. 223 224config SENSORS_ADT7470 225 tristate "Analog Devices ADT7470" 226 depends on I2C 227 select REGMAP_I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7470 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7470. 234 235config SENSORS_ADT7475 236 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 237 depends on I2C 238 select HWMON_VID 239 help 240 If you say yes here you get support for the Analog Devices 241 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 242 chips. 243 244 This driver can also be built as a module. If so, the module 245 will be called adt7475. 246 247config SENSORS_AHT10 248 tristate "Aosong AHT10, AHT20, DHT20" 249 depends on I2C 250 select CRC8 251 help 252 If you say yes here, you get support for the Aosong AHT10, AHT20 and 253 DHT20 temperature and humidity sensors 254 255 This driver can also be built as a module. If so, the module 256 will be called aht10. 257 258config SENSORS_AQUACOMPUTER_D5NEXT 259 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 260 depends on USB_HID 261 select CRC16 262 help 263 If you say yes here you get support for sensors and fans of 264 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 265 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 266 Next sensor, where available. 267 268 This driver can also be built as a module. If so, the module 269 will be called aquacomputer_d5next. 270 271config SENSORS_AS370 272 tristate "Synaptics AS370 SoC hardware monitoring driver" 273 help 274 If you say yes here you get support for the PVT sensors of 275 the Synaptics AS370 SoC 276 277 This driver can also be built as a module. If so, the module 278 will be called as370-hwmon. 279 280 281config SENSORS_ASC7621 282 tristate "Andigilog aSC7621" 283 depends on I2C 284 help 285 If you say yes here you get support for the aSC7621 286 family of SMBus sensors chip found on most Intel X38, X48, X58, 287 945, 965 and 975 desktop boards. Currently supported chips: 288 aSC7621 289 aSC7621a 290 291 This driver can also be built as a module. If so, the module 292 will be called asc7621. 293 294config SENSORS_ASUS_ROG_RYUJIN 295 tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver" 296 depends on HID 297 help 298 If you say yes here you get support for the fans and sensors of 299 the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler. 300 301 This driver can also be built as a module. If so, the module 302 will be called asus_rog_ryujin. 303 304config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NODE 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338config SENSORS_KBATT 339 tristate "KEBA battery controller support" 340 depends on KEBA_CP500 341 help 342 This driver supports the battery monitoring controller found in 343 KEBA system FPGA devices. 344 345 This driver can also be built as a module. If so, the module 346 will be called kbatt. 347 348config SENSORS_KFAN 349 tristate "KEBA fan controller support" 350 depends on KEBA_CP500 351 help 352 This driver supports the fan controller found in KEBA system 353 FPGA devices. 354 355 This driver can also be built as a module. If so, the module 356 will be called kfan. 357 358config SENSORS_FAM15H_POWER 359 tristate "AMD Family 15h processor power" 360 depends on X86 && PCI && CPU_SUP_AMD 361 help 362 If you say yes here you get support for processor power 363 information of your AMD family 15h CPU. 364 365 This driver can also be built as a module. If so, the module 366 will be called fam15h_power. 367 368config SENSORS_APPLESMC 369 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 370 depends on INPUT && X86 371 select NEW_LEDS 372 select LEDS_CLASS 373 help 374 This driver provides support for the Apple System Management 375 Controller, which provides an accelerometer (Apple Sudden Motion 376 Sensor), light sensors, temperature sensors, keyboard backlight 377 control and fan control. 378 379 Only Intel-based Apple's computers are supported (MacBook Pro, 380 MacBook, MacMini). 381 382 Data from the different sensors, keyboard backlight control and fan 383 control are accessible via sysfs. 384 385 This driver also provides an absolute input class device, allowing 386 the laptop to act as a pinball machine-esque joystick. 387 388 Say Y here if you have an applicable laptop and want to experience 389 the awesome power of applesmc. 390 391config SENSORS_ARM_SCMI 392 tristate "ARM SCMI Sensors" 393 depends on ARM_SCMI_PROTOCOL 394 depends on THERMAL || !THERMAL_OF 395 help 396 This driver provides support for temperature, voltage, current 397 and power sensors available on SCMI based platforms. The actual 398 number and type of sensors exported depend on the platform. 399 400 This driver can also be built as a module. If so, the module 401 will be called scmi-hwmon. 402 403config SENSORS_ARM_SCPI 404 tristate "ARM SCPI Sensors" 405 depends on ARM_SCPI_PROTOCOL 406 depends on THERMAL || !THERMAL_OF 407 help 408 This driver provides support for temperature, voltage, current 409 and power sensors available on ARM Ltd's SCP based platforms. The 410 actual number and type of sensors exported depend on the platform. 411 412config SENSORS_ASB100 413 tristate "Asus ASB100 Bach" 414 depends on (X86 || COMPILE_TEST) && I2C 415 select HWMON_VID 416 help 417 If you say yes here you get support for the ASB100 Bach sensor 418 chip found on some Asus mainboards. 419 420 This driver can also be built as a module. If so, the module 421 will be called asb100. 422 423config SENSORS_ASPEED 424 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 425 depends on ARCH_ASPEED || COMPILE_TEST 426 depends on THERMAL || THERMAL=n 427 select REGMAP 428 help 429 This driver provides support for ASPEED AST2400/AST2500 PWM 430 and Fan Tacho controllers. 431 432 This driver can also be built as a module. If so, the module 433 will be called aspeed_pwm_tacho. 434 435config SENSORS_ASPEED_G6 436 tristate "ASPEED G6 PWM and Fan tach driver" 437 depends on ARCH_ASPEED || COMPILE_TEST 438 depends on PWM 439 help 440 This driver provides support for ASPEED G6 PWM and Fan Tach 441 controllers. 442 443 This driver can also be built as a module. If so, the module 444 will be called aspeed_g6_pwm_tach. 445 446config SENSORS_ATXP1 447 tristate "Attansic ATXP1 VID controller" 448 depends on I2C 449 select HWMON_VID 450 help 451 If you say yes here you get support for the Attansic ATXP1 VID 452 controller. 453 454 If your board have such a chip, you are able to control your CPU 455 core and other voltages. 456 457 This driver can also be built as a module. If so, the module 458 will be called atxp1. 459 460config SENSORS_CGBC 461 tristate "Congatec Board Controller Sensors" 462 depends on MFD_CGBC 463 help 464 Enable sensors support for the Congatec Board Controller. It has 465 temperature, voltage, current and fan sensors. 466 467 This driver can also be built as a module. If so, the module will be 468 called cgbc-hwmon. 469 470config SENSORS_CHIPCAP2 471 tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" 472 depends on I2C 473 help 474 Say yes here to build support for the Amphenol ChipCap 2 475 relative humidity and temperature sensor. 476 477 To compile this driver as a module, choose M here: the module 478 will be called chipcap2. 479 480config SENSORS_CORSAIR_CPRO 481 tristate "Corsair Commander Pro controller" 482 depends on HID 483 help 484 If you say yes here you get support for the Corsair Commander Pro 485 controller. 486 487 This driver can also be built as a module. If so, the module 488 will be called corsair-cpro. 489 490config SENSORS_CORSAIR_PSU 491 tristate "Corsair PSU HID controller" 492 depends on HID 493 help 494 If you say yes here you get support for Corsair PSUs with a HID 495 interface. 496 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 497 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 498 by Corsair. 499 500 This driver can also be built as a module. If so, the module 501 will be called corsair-psu. 502 503config SENSORS_CROS_EC 504 tristate "ChromeOS Embedded Controller sensors" 505 depends on MFD_CROS_EC_DEV 506 default MFD_CROS_EC_DEV 507 help 508 If you say yes here you get support for ChromeOS Embedded Controller 509 sensors. 510 511 This driver can also be built as a module. If so, the module 512 will be called cros_ec_hwmon. 513 514config SENSORS_DRIVETEMP 515 tristate "Hard disk drives with temperature sensors" 516 depends on SCSI && ATA 517 help 518 If you say yes you get support for the temperature sensor on 519 hard disk drives. 520 521 This driver can also be built as a module. If so, the module 522 will be called drivetemp. 523 524config SENSORS_DS620 525 tristate "Dallas Semiconductor DS620" 526 depends on I2C 527 help 528 If you say yes here you get support for Dallas Semiconductor 529 DS620 sensor chip. 530 531 This driver can also be built as a module. If so, the module 532 will be called ds620. 533 534config SENSORS_DS1621 535 tristate "Dallas Semiconductor DS1621 and compatibles" 536 depends on I2C 537 help 538 If you say yes here you get support for Dallas Semiconductor/Maxim 539 Integrated DS1621 sensor chips and compatible models including: 540 541 - Dallas Semiconductor DS1625 542 - Maxim Integrated DS1631 543 - Maxim Integrated DS1721 544 - Maxim Integrated DS1731 545 546 This driver can also be built as a module. If so, the module 547 will be called ds1621. 548 549config SENSORS_DELL_SMM 550 tristate "Dell laptop SMM BIOS hwmon driver" 551 depends on ACPI_WMI 552 depends on X86 553 imply THERMAL 554 help 555 This hwmon driver adds support for reporting temperature of different 556 sensors and controls the fans on Dell laptops via System Management 557 Mode provided by Dell BIOS. 558 559 When option I8K is also enabled this driver provides legacy /proc/i8k 560 userspace interface for i8kutils package. 561 562config I8K 563 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 564 depends on SENSORS_DELL_SMM 565 depends on PROC_FS 566 help 567 This option enables the legacy /proc/i8k userspace interface of the 568 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 569 version, temperatures and allows control of fan speeds of some Dell 570 laptops. Sometimes it also reports power and hotkey status. 571 572 This interface is required to run programs from the i8kutils package. 573 574 Say Y if you intend to run userspace programs that use this interface. 575 Say N otherwise. 576 577config SENSORS_DA9052_ADC 578 tristate "Dialog DA9052/DA9053 ADC" 579 depends on PMIC_DA9052 580 help 581 Say y here to support the ADC found on Dialog Semiconductor 582 DA9052-BC and DA9053-AA/Bx PMICs. 583 584 This driver can also be built as module. If so, the module 585 will be called da9052-hwmon. 586 587config SENSORS_DA9055 588 tristate "Dialog Semiconductor DA9055 ADC" 589 depends on MFD_DA9055 590 help 591 If you say yes here you get support for ADC on the Dialog 592 Semiconductor DA9055 PMIC. 593 594 This driver can also be built as a module. If so, the module 595 will be called da9055-hwmon. 596 597config SENSORS_I5K_AMB 598 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 599 depends on PCI 600 help 601 If you say yes here you get support for FB-DIMM AMB temperature 602 monitoring chips on systems with the Intel 5000 series chipset. 603 604 This driver can also be built as a module. If so, the module 605 will be called i5k_amb. 606 607config SENSORS_SPARX5 608 tristate "Sparx5 SoC temperature sensor" 609 depends on ARCH_SPARX5 || COMPILE_TEST 610 help 611 If you say yes here you get support for temperature monitoring 612 with the Microchip Sparx5 SoC. 613 614 This driver can also be built as a module. If so, the module 615 will be called sparx5-temp. 616 617config SENSORS_F71805F 618 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 619 depends on HAS_IOPORT 620 depends on !PPC 621 help 622 If you say yes here you get support for hardware monitoring 623 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 624 Super-I/O chips. 625 626 This driver can also be built as a module. If so, the module 627 will be called f71805f. 628 629config SENSORS_F71882FG 630 tristate "Fintek F71882FG and compatibles" 631 depends on HAS_IOPORT 632 depends on !PPC 633 help 634 If you say yes here you get support for hardware monitoring 635 features of many Fintek Super-I/O (LPC) chips. The currently 636 supported chips are: 637 F71808E/A 638 F71858FG 639 F71862FG 640 F71863FG 641 F71869F/E/A 642 F71882FG 643 F71883FG 644 F71889FG/ED/A 645 F8000 646 F81801U 647 F81865F 648 649 This driver can also be built as a module. If so, the module 650 will be called f71882fg. 651 652config SENSORS_F75375S 653 tristate "Fintek F75375S/SP, F75373 and F75387" 654 depends on I2C 655 help 656 If you say yes here you get support for hardware monitoring 657 features of the Fintek F75375S/SP, F75373 and F75387 658 659 This driver can also be built as a module. If so, the module 660 will be called f75375s. 661 662config SENSORS_GSC 663 tristate "Gateworks System Controller ADC" 664 depends on MFD_GATEWORKS_GSC 665 help 666 Support for the Gateworks System Controller A/D converters. 667 668 To compile this driver as a module, choose M here: 669 the module will be called gsc-hwmon. 670 671config SENSORS_MC13783_ADC 672 tristate "Freescale MC13783/MC13892 ADC" 673 depends on MFD_MC13XXX 674 help 675 Support for the A/D converter on MC13783 and MC13892 PMIC. 676 677config SENSORS_MC33XS2410 678 tristate "MC33XS2410 HWMON support" 679 depends on PWM_MC33XS2410 680 help 681 If you say yes here you get hardware monitoring support for 682 MC33XS2410. 683 684 This driver can also be built as a module. If so, the module 685 will be called mc33xs2410_hwmon. 686 687config SENSORS_FSCHMD 688 tristate "Fujitsu Siemens Computers sensor chips" 689 depends on (X86 || COMPILE_TEST) && I2C 690 help 691 If you say yes here you get support for the following Fujitsu 692 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 693 Heimdall, Heracles, Hades and Syleus including support for the 694 integrated watchdog. 695 696 This is a merged driver for FSC sensor chips replacing the fscpos, 697 fscscy and fscher drivers and adding support for several other FSC 698 sensor chips. 699 700 This driver can also be built as a module. If so, the module 701 will be called fschmd. 702 703config SENSORS_FTSTEUTATES 704 tristate "Fujitsu Technology Solutions sensor chip Teutates" 705 depends on I2C && WATCHDOG 706 select WATCHDOG_CORE 707 help 708 If you say yes here you get support for the Fujitsu Technology 709 Solutions (FTS) sensor chip "Teutates" including support for 710 the integrated watchdog. 711 712 This driver can also be built as a module. If so, the module 713 will be called ftsteutates. 714 715config SENSORS_GIGABYTE_WATERFORCE 716 tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" 717 depends on USB_HID 718 help 719 If you say yes here you get support for hardware monitoring for the 720 Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. 721 722 This driver can also be built as a module. If so, the module 723 will be called gigabyte_waterforce. 724 725config SENSORS_GL518SM 726 tristate "Genesys Logic GL518SM" 727 depends on I2C 728 help 729 If you say yes here you get support for Genesys Logic GL518SM 730 sensor chips. 731 732 This driver can also be built as a module. If so, the module 733 will be called gl518sm. 734 735config SENSORS_GL520SM 736 tristate "Genesys Logic GL520SM" 737 depends on I2C 738 select HWMON_VID 739 help 740 If you say yes here you get support for Genesys Logic GL520SM 741 sensor chips. 742 743 This driver can also be built as a module. If so, the module 744 will be called gl520sm. 745 746config SENSORS_GPD 747 tristate "GPD handhelds" 748 depends on X86 && DMI && HAS_IOPORT 749 help 750 If you say yes here you get support for fan readings and 751 control over GPD handheld devices. 752 753 Can also be built as a module. In that case it will be 754 called gpd-fan. 755 756config SENSORS_G760A 757 tristate "GMT G760A" 758 depends on I2C 759 help 760 If you say yes here you get support for Global Mixed-mode 761 Technology Inc G760A fan speed PWM controller chips. 762 763 This driver can also be built as a module. If so, the module 764 will be called g760a. 765 766config SENSORS_G762 767 tristate "GMT G762 and G763" 768 depends on I2C 769 help 770 If you say yes here you get support for Global Mixed-mode 771 Technology Inc G762 and G763 fan speed PWM controller chips. 772 773 This driver can also be built as a module. If so, the module 774 will be called g762. 775 776config SENSORS_GPIO_FAN 777 tristate "GPIO fan" 778 depends on GPIOLIB || COMPILE_TEST 779 depends on THERMAL || THERMAL=n 780 help 781 If you say yes here you get support for fans connected to GPIO lines. 782 783 This driver can also be built as a module. If so, the module 784 will be called gpio-fan. 785 786config SENSORS_GXP_FAN_CTRL 787 tristate "HPE GXP fan controller" 788 depends on ARCH_HPE_GXP || COMPILE_TEST 789 help 790 If you say yes here you get support for GXP fan control functionality. 791 792 The GXP controls fan function via the CPLD through the use of PWM 793 registers. This driver reports status and pwm setting of the fans. 794 795config SENSORS_HIH6130 796 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 797 depends on I2C 798 help 799 If you say yes here you get support for Honeywell Humidicon 800 HIH-6130 and HIH-6131 Humidicon humidity sensors. 801 802 This driver can also be built as a module. If so, the module 803 will be called hih6130. 804 805config SENSORS_HS3001 806 tristate "Renesas HS3001 humidity and temperature sensors" 807 depends on I2C 808 help 809 If you say yes here you get support for the Renesas HS3001, 810 to HS3004 humidity and temperature sensors. 811 812 This driver can also be built as a module. If so, the module 813 will be called hs3001. 814 815config SENSORS_HTU31 816 tristate "Measurement Specialties HTU31 humidity and temperature sensor" 817 depends on I2C 818 select CRC8 819 help 820 If you say yes here you get support for the HTU31 humidity 821 and temperature sensors. 822 823 This driver can also be built as a module. If so, the module 824 will be called htu31. 825 826config SENSORS_IBMAEM 827 tristate "IBM Active Energy Manager temperature/power sensors and control" 828 select IPMI_SI 829 depends on IPMI_HANDLER 830 help 831 If you say yes here you get support for the temperature and 832 power sensors and capping hardware in various IBM System X 833 servers that support Active Energy Manager. This includes 834 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 835 and certain HC10/HS2x/LS2x/QS2x blades. 836 837 This driver can also be built as a module. If so, the module 838 will be called ibmaem. 839 840config SENSORS_IBMPEX 841 tristate "IBM PowerExecutive temperature/power sensors" 842 select IPMI_SI 843 depends on IPMI_HANDLER 844 help 845 If you say yes here you get support for the temperature and 846 power sensors in various IBM System X servers that support 847 PowerExecutive. So far this includes the x3350, x3550, x3650, 848 x3655, and x3755; the x3800, x3850, and x3950 models that have 849 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 850 851 This driver can also be built as a module. If so, the module 852 will be called ibmpex. 853 854config SENSORS_IBMPOWERNV 855 tristate "IBM POWERNV platform sensors" 856 depends on PPC_POWERNV 857 default y 858 help 859 If you say yes here you get support for the temperature/fan/power 860 sensors on your PowerNV platform. 861 862 This driver can also be built as a module. If so, the module 863 will be called ibmpowernv. 864 865config SENSORS_IIO_HWMON 866 tristate "Hwmon driver that uses channels specified via iio maps" 867 depends on IIO 868 help 869 This is a platform driver that in combination with a suitable 870 map allows IIO devices to provide basic hwmon functionality 871 for those channels specified in the map. This map can be provided 872 either via platform data or the device tree bindings. 873 874config SENSORS_I5500 875 tristate "Intel 5500/5520/X58 temperature sensor" 876 depends on X86 && PCI 877 help 878 If you say yes here you get support for the temperature 879 sensor inside the Intel 5500, 5520 and X58 chipsets. 880 881 This driver can also be built as a module. If so, the module 882 will be called i5500_temp. 883 884config SENSORS_CORETEMP 885 tristate "Intel Core/Core2/Atom temperature sensor" 886 depends on X86 887 help 888 If you say yes here you get support for the temperature 889 sensor inside your CPU. Most of the family 6 CPUs 890 are supported. Check Documentation/hwmon/coretemp.rst for details. 891 892config SENSORS_ISL28022 893 tristate "Renesas ISL28022" 894 depends on I2C 895 select REGMAP_I2C 896 help 897 If you say yes here you get support for ISL28022 power monitor. 898 Check Documentation/hwmon/isl28022.rst for details. 899 900 This driver can also be built as a module. If so, the module 901 will be called isl28022. 902 903config SENSORS_IT87 904 tristate "ITE IT87xx and compatibles" 905 depends on HAS_IOPORT 906 depends on !PPC 907 select HWMON_VID 908 help 909 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 910 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 911 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 912 IT8603E, IT8620E, IT8623E, IT8628E, and IT8689E sensor chips, and 913 the SiS950 clone. 914 915 This driver can also be built as a module. If so, the module 916 will be called it87. 917 918config SENSORS_JC42 919 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 920 depends on I2C 921 select REGMAP_I2C 922 help 923 If you say yes here, you get support for JEDEC JC42.4 compliant 924 temperature sensors, which are used on many DDR3 memory modules for 925 mobile devices and servers. Support will include, but not be limited 926 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 927 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 928 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 929 930 This driver can also be built as a module. If so, the module 931 will be called jc42. 932 933config SENSORS_POWERZ 934 tristate "ChargerLAB POWER-Z USB-C tester" 935 depends on USB 936 help 937 If you say yes here you get support for ChargerLAB POWER-Z series of 938 USB-C charging testers. 939 940 This driver can also be built as a module. If so, the module 941 will be called powerz. 942 943config SENSORS_POWR1220 944 tristate "Lattice POWR1220 Power Monitoring" 945 depends on I2C 946 help 947 If you say yes here you get access to the hardware monitoring 948 functions of the Lattice POWR1220 isp Power Supply Monitoring, 949 Sequencing and Margining Controller. 950 951 This driver can also be built as a module. If so, the module 952 will be called powr1220. 953 954config SENSORS_LAN966X 955 tristate "Microchip LAN966x Hardware Monitoring" 956 depends on SOC_LAN966 || COMPILE_TEST 957 select REGMAP 958 select POLYNOMIAL 959 help 960 If you say yes here you get support for temperature monitoring 961 on the Microchip LAN966x SoC. 962 963 This driver can also be built as a module. If so, the module 964 will be called lan966x-hwmon. 965 966config SENSORS_LATTEPANDA_SIGMA_EC 967 tristate "LattePanda Sigma EC hardware monitoring" 968 depends on X86 969 depends on DMI 970 depends on HAS_IOPORT 971 help 972 If you say yes here you get support for the hardware monitoring 973 features of the Embedded Controller on LattePanda Sigma 974 single-board computers, including CPU fan speed (RPM) and 975 board and CPU temperatures. 976 977 The driver reads the EC directly via ACPI EC I/O ports and 978 uses DMI matching to ensure it only loads on supported hardware. 979 980 This driver can also be built as a module. If so, the module 981 will be called lattepanda-sigma-ec. 982 983config SENSORS_LENOVO_EC 984 tristate "Sensor reader for Lenovo ThinkStations" 985 depends on X86 986 help 987 If you say yes here you get support for LENOVO 988 EC Sensor data on newer ThinkStation systems 989 990 This driver can also be built as a module. If so, the module 991 will be called lenovo_ec_sensors. 992 993config SENSORS_LINEAGE 994 tristate "Lineage Compact Power Line Power Entry Module" 995 depends on I2C 996 help 997 If you say yes here you get support for the Lineage Compact Power Line 998 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 999 CP2000DC, CP2725, and others. 1000 1001 This driver can also be built as a module. If so, the module 1002 will be called lineage-pem. 1003 1004config SENSORS_LOCHNAGAR 1005 tristate "Lochnagar Hardware Monitor" 1006 depends on MFD_LOCHNAGAR 1007 help 1008 If you say yes here you get support for Lochnagar 2 temperature, 1009 voltage and current sensors abilities. 1010 1011 This driver can also be built as a module. If so, the module 1012 will be called lochnagar-hwmon. 1013 1014config SENSORS_LTC2945 1015 tristate "Linear Technology LTC2945" 1016 depends on I2C 1017 select REGMAP_I2C 1018 help 1019 If you say yes here you get support for Linear Technology LTC2945 1020 I2C System Monitor. 1021 1022 This driver can also be built as a module. If so, the module will 1023 be called ltc2945. 1024 1025config SENSORS_LTC2947 1026 tristate 1027 1028config SENSORS_LTC2947_I2C 1029 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 1030 depends on I2C 1031 select REGMAP_I2C 1032 select SENSORS_LTC2947 1033 help 1034 If you say yes here you get support for Linear Technology LTC2947 1035 I2C High Precision Power and Energy Monitor 1036 1037 This driver can also be built as a module. If so, the module will 1038 be called ltc2947-i2c. 1039 1040config SENSORS_LTC2947_SPI 1041 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 1042 depends on SPI_MASTER 1043 select REGMAP_SPI 1044 select SENSORS_LTC2947 1045 help 1046 If you say yes here you get support for Linear Technology LTC2947 1047 SPI High Precision Power and Energy Monitor 1048 1049 This driver can also be built as a module. If so, the module will 1050 be called ltc2947-spi. 1051 1052config SENSORS_LTC2990 1053 tristate "Linear Technology LTC2990" 1054 depends on I2C 1055 help 1056 If you say yes here you get support for Linear Technology LTC2990 1057 I2C System Monitor. The LTC2990 supports a combination of voltage, 1058 current and temperature monitoring. 1059 1060 This driver can also be built as a module. If so, the module will 1061 be called ltc2990. 1062 1063config SENSORS_LTC2991 1064 tristate "Analog Devices LTC2991" 1065 depends on I2C 1066 select REGMAP_I2C 1067 help 1068 If you say yes here you get support for Analog Devices LTC2991 1069 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 1070 supports a combination of voltage, current and temperature monitoring. 1071 1072 This driver can also be built as a module. If so, the module will 1073 be called ltc2991. 1074 1075config SENSORS_LTC2992 1076 tristate "Linear Technology LTC2992" 1077 depends on I2C 1078 depends on GPIOLIB 1079 help 1080 If you say yes here you get support for Linear Technology LTC2992 1081 I2C System Monitor. The LTC2992 measures current, voltage, and 1082 power of two supplies. 1083 1084 This driver can also be built as a module. If so, the module will 1085 be called ltc2992. 1086 1087config SENSORS_LTC4151 1088 tristate "Linear Technology LTC4151" 1089 depends on I2C 1090 help 1091 If you say yes here you get support for Linear Technology LTC4151 1092 High Voltage I2C Current and Voltage Monitor interface. 1093 1094 This driver can also be built as a module. If so, the module will 1095 be called ltc4151. 1096 1097config SENSORS_LTC4215 1098 tristate "Linear Technology LTC4215" 1099 depends on I2C 1100 help 1101 If you say yes here you get support for Linear Technology LTC4215 1102 Hot Swap Controller I2C interface. 1103 1104 This driver can also be built as a module. If so, the module will 1105 be called ltc4215. 1106 1107config SENSORS_LTC4222 1108 tristate "Linear Technology LTC4222" 1109 depends on I2C 1110 select REGMAP_I2C 1111 help 1112 If you say yes here you get support for Linear Technology LTC4222 1113 Dual Hot Swap Controller I2C interface. 1114 1115 This driver can also be built as a module. If so, the module will 1116 be called ltc4222. 1117 1118config SENSORS_LTC4245 1119 tristate "Linear Technology LTC4245" 1120 depends on I2C 1121 help 1122 If you say yes here you get support for Linear Technology LTC4245 1123 Multiple Supply Hot Swap Controller I2C interface. 1124 1125 This driver can also be built as a module. If so, the module will 1126 be called ltc4245. 1127 1128config SENSORS_LTC4260 1129 tristate "Linear Technology LTC4260" 1130 depends on I2C 1131 select REGMAP_I2C 1132 help 1133 If you say yes here you get support for Linear Technology LTC4260 1134 Positive Voltage Hot Swap Controller I2C interface. 1135 1136 This driver can also be built as a module. If so, the module will 1137 be called ltc4260. 1138 1139config SENSORS_LTC4261 1140 tristate "Linear Technology LTC4261" 1141 depends on I2C 1142 help 1143 If you say yes here you get support for Linear Technology LTC4261 1144 Negative Voltage Hot Swap Controller I2C interface. 1145 1146 This driver can also be built as a module. If so, the module will 1147 be called ltc4261. 1148 1149config SENSORS_LTC4282 1150 tristate "Analog Devices LTC4282" 1151 depends on I2C 1152 select REGMAP_I2C 1153 help 1154 If you say yes here you get support for Analog Devices LTC4282 1155 High Current Hot Swap Controller I2C interface. 1156 1157 This driver can also be built as a module. If so, the module will 1158 be called ltc4282. 1159 1160config SENSORS_LTQ_CPUTEMP 1161 bool "Lantiq cpu temperature sensor driver" 1162 depends on SOC_XWAY 1163 help 1164 If you say yes here you get support for the temperature 1165 sensor inside your CPU. 1166 1167config SENSORS_MACSMC_HWMON 1168 tristate "Apple SMC (Apple Silicon)" 1169 depends on MFD_MACSMC && OF 1170 help 1171 This driver enables hwmon support for current, power, temperature, 1172 and voltage sensors, as well as fan speed reporting and control 1173 on Apple Silicon devices. Say Y here if you have an Apple Silicon 1174 device. 1175 1176 This driver can also be built as a module. If so, the module will 1177 be called macsmc-hwmon. 1178 1179config SENSORS_MAX1111 1180 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1181 depends on SPI_MASTER 1182 help 1183 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1184 ADC chips. 1185 1186 This driver can also be built as a module. If so, the module 1187 will be called max1111. 1188 1189config SENSORS_MAX127 1190 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1191 depends on I2C 1192 help 1193 Say y here to support Maxim's MAX127 DAS chips. 1194 1195 This driver can also be built as a module. If so, the module 1196 will be called max127. 1197 1198config SENSORS_MAX16065 1199 tristate "Maxim MAX16065 System Manager and compatibles" 1200 depends on I2C 1201 help 1202 If you say yes here you get support for hardware monitoring 1203 capabilities of the following Maxim System Manager chips. 1204 MAX16065 1205 MAX16066 1206 MAX16067 1207 MAX16068 1208 MAX16070 1209 MAX16071 1210 1211 This driver can also be built as a module. If so, the module 1212 will be called max16065. 1213 1214config SENSORS_MAX1619 1215 tristate "Maxim MAX1619 sensor chip" 1216 depends on I2C 1217 help 1218 If you say yes here you get support for MAX1619 sensor chip. 1219 1220 This driver can also be built as a module. If so, the module 1221 will be called max1619. 1222 1223config SENSORS_MAX1668 1224 tristate "Maxim MAX1668 and compatibles" 1225 depends on I2C 1226 select REGMAP_I2C 1227 help 1228 If you say yes here you get support for MAX1668, MAX1989 and 1229 MAX1805 chips. 1230 1231 This driver can also be built as a module. If so, the module 1232 will be called max1668. 1233 1234config SENSORS_MAX197 1235 tristate "Maxim MAX197 and compatibles" 1236 help 1237 Support for the Maxim MAX197 A/D converter. 1238 Support will include, but not be limited to, MAX197, and MAX199. 1239 1240 This driver can also be built as a module. If so, the module 1241 will be called max197. 1242 1243config SENSORS_MAX31722 1244 tristate "MAX31722 temperature sensor" 1245 depends on SPI 1246 help 1247 Support for the Maxim Integrated MAX31722/MAX31723 digital 1248 thermometers/thermostats operating over an SPI interface. 1249 1250 This driver can also be built as a module. If so, the module 1251 will be called max31722. 1252 1253config SENSORS_MAX31730 1254 tristate "MAX31730 temperature sensor" 1255 depends on I2C 1256 help 1257 Support for the Maxim Integrated MAX31730 3-Channel Remote 1258 Temperature Sensor. 1259 1260 This driver can also be built as a module. If so, the module 1261 will be called max31730. 1262 1263config SENSORS_MAX31760 1264 tristate "MAX31760 fan speed controller" 1265 depends on I2C 1266 select REGMAP_I2C 1267 help 1268 Support for the Analog Devices MAX31760 Precision Fan-Speed 1269 Controller. MAX31760 integrates temperature sensing along with 1270 precision PWM fan control. 1271 1272 This driver can also be built as a module. If so, the module 1273 will be called max31760. 1274 1275config MAX31827 1276 tristate "MAX31827 low-power temperature switch and similar devices" 1277 depends on I2C 1278 select REGMAP_I2C 1279 help 1280 If you say yes here you get support for MAX31827, MAX31828 and 1281 MAX31829 low-power temperature switches and sensors connected with I2C. 1282 1283 This driver can also be built as a module. If so, the module 1284 will be called max31827. 1285 1286config SENSORS_MAX6620 1287 tristate "Maxim MAX6620 fan controller" 1288 depends on I2C 1289 help 1290 If you say yes here you get support for the MAX6620 1291 fan controller. 1292 1293 This driver can also be built as a module. If so, the module 1294 will be called max6620. 1295 1296config SENSORS_MAX6621 1297 tristate "Maxim MAX6621 sensor chip" 1298 depends on I2C 1299 select REGMAP_I2C 1300 help 1301 If you say yes here you get support for MAX6621 sensor chip. 1302 MAX6621 is a PECI-to-I2C translator provides an efficient, 1303 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1304 It allows reading the temperature from the PECI-compliant 1305 host directly from up to four PECI-enabled CPUs. 1306 1307 This driver can also be built as a module. If so, the module 1308 will be called max6621. 1309 1310config SENSORS_MAX6639 1311 tristate "Maxim MAX6639 sensor chip" 1312 depends on I2C 1313 select REGMAP_I2C 1314 help 1315 If you say yes here you get support for the MAX6639 1316 sensor chips. 1317 1318 This driver can also be built as a module. If so, the module 1319 will be called max6639. 1320 1321config SENSORS_MAX6650 1322 tristate "Maxim MAX6650 sensor chip" 1323 depends on I2C 1324 depends on THERMAL || THERMAL=n 1325 help 1326 If you say yes here you get support for the MAX6650 / MAX6651 1327 sensor chips. 1328 1329 This driver can also be built as a module. If so, the module 1330 will be called max6650. 1331 1332config SENSORS_MAX6697 1333 tristate "Maxim MAX6697 and compatibles" 1334 depends on I2C 1335 help 1336 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1337 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1338 temperature sensor chips. 1339 1340 This driver can also be built as a module. If so, the module 1341 will be called max6697. 1342 1343config SENSORS_MAX31790 1344 tristate "Maxim MAX31790 sensor chip" 1345 depends on I2C 1346 help 1347 If you say yes here you get support for 6-Channel PWM-Output 1348 Fan RPM Controller. 1349 1350 This driver can also be built as a module. If so, the module 1351 will be called max31790. 1352 1353config SENSORS_MAX77705 1354 tristate "MAX77705 current and voltage sensor" 1355 depends on MFD_MAX77705 1356 help 1357 If you say yes here you get support for MAX77705 sensors connected with I2C. 1358 1359 This driver can also be built as a module. If so, the module 1360 will be called max77705-hwmon. 1361 1362config SENSORS_MC34VR500 1363 tristate "NXP MC34VR500 hardware monitoring driver" 1364 depends on I2C 1365 select REGMAP_I2C 1366 help 1367 If you say yes here you get support for the temperature and input 1368 voltage sensors of the NXP MC34VR500. 1369 1370config SENSORS_MCP3021 1371 tristate "Microchip MCP3021 and compatibles" 1372 depends on I2C 1373 help 1374 If you say yes here you get support for MCP3021 and MCP3221. 1375 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1376 with 12-bit resolution. 1377 1378 This driver can also be built as a module. If so, the module 1379 will be called mcp3021. 1380 1381config SENSORS_MLXREG_FAN 1382 tristate "Mellanox FAN driver" 1383 depends on MELLANOX_PLATFORM 1384 imply THERMAL 1385 select REGMAP 1386 help 1387 This option enables support for the FAN control on the Mellanox 1388 Ethernet and InfiniBand switches. The driver can be activated by the 1389 platform device add call. Say Y to enable these. To compile this 1390 driver as a module, choose 'M' here: the module will be called 1391 mlxreg-fan. 1392 1393config SENSORS_TC654 1394 tristate "Microchip TC654/TC655 and compatibles" 1395 depends on I2C 1396 help 1397 If you say yes here you get support for TC654 and TC655. 1398 The TC654 and TC655 are PWM mode fan speed controllers with 1399 FanSense technology for use with brushless DC fans. 1400 1401 This driver can also be built as a module. If so, the module 1402 will be called tc654. 1403 1404config SENSORS_TPS23861 1405 tristate "Texas Instruments TPS23861 PoE PSE" 1406 depends on I2C 1407 select REGMAP_I2C 1408 help 1409 If you say yes here you get support for Texas Instruments 1410 TPS23861 802.3at PoE PSE chips. 1411 1412 This driver can also be built as a module. If so, the module 1413 will be called tps23861. 1414 1415config SENSORS_MENF21BMC_HWMON 1416 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1417 depends on MFD_MENF21BMC 1418 help 1419 Say Y here to include support for the MEN 14F021P00 BMC 1420 hardware monitoring. 1421 1422 This driver can also be built as a module. If so the module 1423 will be called menf21bmc_hwmon. 1424 1425config SENSORS_MR75203 1426 tristate "Moortec Semiconductor MR75203 PVT Controller" 1427 select REGMAP_MMIO 1428 help 1429 If you say yes here you get support for Moortec MR75203 1430 PVT controller. 1431 1432 This driver can also be built as a module. If so, the module 1433 will be called mr75203. 1434 1435config SENSORS_ADCXX 1436 tristate "National Semiconductor ADCxxxSxxx" 1437 depends on SPI_MASTER 1438 help 1439 If you say yes here you get support for the National Semiconductor 1440 ADC<bb><c>S<sss> chip family, where 1441 * bb is the resolution in number of bits (8, 10, 12) 1442 * c is the number of channels (1, 2, 4, 8) 1443 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1444 kSPS and 101 for 1 MSPS) 1445 1446 Examples : ADC081S101, ADC124S501, ... 1447 1448 This driver can also be built as a module. If so, the module 1449 will be called adcxx. 1450 1451config SENSORS_LM63 1452 tristate "National Semiconductor LM63 and compatibles" 1453 depends on I2C 1454 help 1455 If you say yes here you get support for the National 1456 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1457 sensors with integrated fan control. Such chips are found 1458 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1459 others. 1460 1461 This driver can also be built as a module. If so, the module 1462 will be called lm63. 1463 1464config SENSORS_LM70 1465 tristate "National Semiconductor LM70 and compatibles" 1466 depends on SPI_MASTER 1467 help 1468 If you say yes here you get support for the National Semiconductor 1469 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1470 TMP125 digital temperature sensor chips. 1471 1472 This driver can also be built as a module. If so, the module 1473 will be called lm70. 1474 1475config SENSORS_LM73 1476 tristate "National Semiconductor LM73" 1477 depends on I2C 1478 help 1479 If you say yes here you get support for National Semiconductor LM73 1480 sensor chips. 1481 This driver can also be built as a module. If so, the module 1482 will be called lm73. 1483 1484config SENSORS_LM75 1485 tristate "National Semiconductor LM75 and compatibles" 1486 depends on I3C_OR_I2C 1487 select REGMAP_I2C 1488 select REGMAP_I3C if I3C 1489 help 1490 If you say yes here you get support for one common type of 1491 temperature sensor chip, with models including: 1492 1493 - Analog Devices ADT75 1494 - Atmel (now Microchip) AT30TS74 1495 - Dallas Semiconductor DS75, DS1775 and DS7505 1496 - Global Mixed-mode Technology (GMT) G751 1497 - Maxim MAX6625 and MAX6626 1498 - Microchip MCP980x 1499 - National Semiconductor LM75, LM75A 1500 - NXP's LM75A 1501 - ST Microelectronics STDS75 1502 - ST Microelectronics STLM75 1503 - TelCom (now Microchip) TCN75 1504 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1505 TMP175, TMP275 1506 1507 This driver supports driver model based binding through board 1508 specific I2C device tables. 1509 1510 It also supports the "legacy" style of driver binding. To use 1511 that with some chips which don't replicate LM75 quirks exactly, 1512 you may need the "force" module parameter. 1513 1514 This driver can also be built as a module. If so, the module 1515 will be called lm75. 1516 1517config SENSORS_LM77 1518 tristate "National Semiconductor LM77" 1519 depends on I2C 1520 help 1521 If you say yes here you get support for National Semiconductor LM77 1522 sensor chips. 1523 1524 This driver can also be built as a module. If so, the module 1525 will be called lm77. 1526 1527config SENSORS_LM78 1528 tristate "National Semiconductor LM78 and compatibles" 1529 depends on I2C 1530 select HWMON_VID 1531 help 1532 If you say yes here you get support for National Semiconductor LM78, 1533 LM78-J and LM79. 1534 1535 This driver can also be built as a module. If so, the module 1536 will be called lm78. 1537 1538config SENSORS_LM80 1539 tristate "National Semiconductor LM80 and LM96080" 1540 depends on I2C 1541 help 1542 If you say yes here you get support for National Semiconductor 1543 LM80 and LM96080 sensor chips. 1544 1545 This driver can also be built as a module. If so, the module 1546 will be called lm80. 1547 1548config SENSORS_LM83 1549 tristate "National Semiconductor LM83 and compatibles" 1550 depends on I2C 1551 select REGMAP 1552 help 1553 If you say yes here you get support for National Semiconductor 1554 LM82 and LM83 sensor chips. 1555 1556 This driver can also be built as a module. If so, the module 1557 will be called lm83. 1558 1559config SENSORS_LM85 1560 tristate "National Semiconductor LM85 and compatibles" 1561 depends on I2C 1562 select HWMON_VID 1563 help 1564 If you say yes here you get support for National Semiconductor LM85 1565 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1566 EMC6D101, EMC6D102, and EMC6D103. 1567 1568 This driver can also be built as a module. If so, the module 1569 will be called lm85. 1570 1571config SENSORS_LM87 1572 tristate "National Semiconductor LM87 and compatibles" 1573 depends on I2C 1574 select HWMON_VID 1575 help 1576 If you say yes here you get support for National Semiconductor LM87 1577 and Analog Devices ADM1024 sensor chips. 1578 1579 This driver can also be built as a module. If so, the module 1580 will be called lm87. 1581 1582config SENSORS_LM90 1583 tristate "National Semiconductor LM90 and compatibles" 1584 depends on I2C 1585 help 1586 If you say yes here you get support for National Semiconductor LM84, 1587 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1588 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1589 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1590 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1591 MAX6696, 1592 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1593 Winbond/Nuvoton W83L771W/G/AWG/ASG, NCT7716, NCT7717 and NCT7718, 1594 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1595 sensor chips. 1596 1597 This driver can also be built as a module. If so, the module 1598 will be called lm90. 1599 1600config SENSORS_LM92 1601 tristate "National Semiconductor LM92 and compatibles" 1602 depends on I2C 1603 select REGMAP_I2C 1604 help 1605 If you say yes here you get support for National Semiconductor LM92 1606 and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. 1607 1608 This driver can also be built as a module. If so, the module 1609 will be called lm92. 1610 1611config SENSORS_LM93 1612 tristate "National Semiconductor LM93 and compatibles" 1613 depends on I2C 1614 select HWMON_VID 1615 help 1616 If you say yes here you get support for National Semiconductor LM93, 1617 LM94, and compatible sensor chips. 1618 1619 This driver can also be built as a module. If so, the module 1620 will be called lm93. 1621 1622config SENSORS_LM95234 1623 tristate "National Semiconductor LM95234 and compatibles" 1624 depends on I2C 1625 select REGMAP_I2C 1626 help 1627 If you say yes here you get support for the LM95233 and LM95234 1628 temperature sensor chips. 1629 1630 This driver can also be built as a module. If so, the module 1631 will be called lm95234. 1632 1633config SENSORS_LM95241 1634 tristate "National Semiconductor LM95241 and compatibles" 1635 depends on I2C 1636 help 1637 If you say yes here you get support for LM95231 and LM95241 sensor 1638 chips. 1639 1640 This driver can also be built as a module. If so, the module 1641 will be called lm95241. 1642 1643config SENSORS_LM95245 1644 tristate "National Semiconductor LM95245 and compatibles" 1645 depends on I2C 1646 select REGMAP_I2C 1647 help 1648 If you say yes here you get support for LM95235 and LM95245 1649 temperature sensor chips. 1650 1651 This driver can also be built as a module. If so, the module 1652 will be called lm95245. 1653 1654config SENSORS_PC87360 1655 tristate "National Semiconductor PC87360 family" 1656 depends on HAS_IOPORT 1657 depends on !PPC 1658 select HWMON_VID 1659 help 1660 If you say yes here you get access to the hardware monitoring 1661 functions of the National Semiconductor PC8736x Super-I/O chips. 1662 The PC87360, PC87363 and PC87364 only have fan monitoring and 1663 control. The PC87365 and PC87366 additionally have voltage and 1664 temperature monitoring. 1665 1666 This driver can also be built as a module. If so, the module 1667 will be called pc87360. 1668 1669config SENSORS_PC87427 1670 tristate "National Semiconductor PC87427" 1671 depends on HAS_IOPORT 1672 depends on !PPC 1673 help 1674 If you say yes here you get access to the hardware monitoring 1675 functions of the National Semiconductor PC87427 Super-I/O chip. 1676 The chip has two distinct logical devices, one for fan speed 1677 monitoring and control, and one for voltage and temperature 1678 monitoring. Fan speed monitoring and control are supported, as 1679 well as temperature monitoring. Voltages aren't supported yet. 1680 1681 This driver can also be built as a module. If so, the module 1682 will be called pc87427. 1683 1684config SENSORS_NTC_THERMISTOR 1685 tristate "NTC thermistor support" 1686 depends on IIO 1687 depends on THERMAL || !THERMAL_OF 1688 help 1689 This driver supports NTC thermistors sensor reading and its 1690 interpretation. The driver can also monitor the temperature and 1691 send notifications about the temperature. 1692 1693 Currently, this driver supports 1694 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1695 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1696 B57891S0103 from EPCOS. 1697 1698 This driver can also be built as a module. If so, the module 1699 will be called ntc_thermistor. 1700 1701config SENSORS_NCT6683 1702 tristate "Nuvoton NCT6683D" 1703 depends on HAS_IOPORT 1704 depends on !PPC 1705 help 1706 If you say yes here you get support for the hardware monitoring 1707 functionality of the Nuvoton NCT6683D eSIO chip. 1708 1709 This driver can also be built as a module. If so, the module 1710 will be called nct6683. 1711 1712config SENSORS_NCT6694 1713 tristate "Nuvoton NCT6694 Hardware Monitor support" 1714 depends on MFD_NCT6694 1715 help 1716 Say Y here to support Nuvoton NCT6694 hardware monitoring 1717 functionality. 1718 1719 This driver can also be built as a module. If so, the module 1720 will be called nct6694-hwmon. 1721 1722config SENSORS_NCT6775_CORE 1723 tristate 1724 select REGMAP 1725 help 1726 This module contains common code shared by the platform and 1727 i2c versions of the nct6775 driver; it is not useful on its 1728 own. 1729 1730 If built as a module, the module will be called 1731 nct6775-core. 1732 1733config SENSORS_NCT6775 1734 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1735 depends on HAS_IOPORT 1736 depends on !PPC 1737 depends on ACPI || ACPI=n 1738 select HWMON_VID 1739 select SENSORS_NCT6775_CORE 1740 help 1741 If you say yes here you get support for the hardware monitoring 1742 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1743 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1744 Super-I/O chips. This driver replaces the w83627ehf driver for 1745 NCT6775F and NCT6776F. 1746 1747 This driver can also be built as a module. If so, the module 1748 will be called nct6775. 1749 1750config SENSORS_NCT6775_I2C 1751 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1752 depends on I2C 1753 select REGMAP_I2C 1754 select SENSORS_NCT6775_CORE 1755 help 1756 If you say yes here you get support for the hardware monitoring 1757 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1758 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1759 Super-I/O chips via their I2C interface. 1760 1761 If you're not building a kernel for a BMC, this is probably 1762 not the driver you want (see CONFIG_SENSORS_NCT6775). 1763 1764 This driver can also be built as a module. If so, the module 1765 will be called nct6775-i2c. 1766 1767config SENSORS_NCT7363 1768 tristate "Nuvoton NCT7363Y" 1769 depends on I2C 1770 select REGMAP_I2C 1771 help 1772 If you say yes here you get support for the Nuvoton NCT7363Y 1773 hardware monitoring chip. 1774 1775 This driver can also be built as a module. If so, the module 1776 will be called nct7363. 1777 1778config SENSORS_NCT7802 1779 tristate "Nuvoton NCT7802Y" 1780 depends on I2C 1781 select REGMAP_I2C 1782 help 1783 If you say yes here you get support for the Nuvoton NCT7802Y 1784 hardware monitoring chip. 1785 1786 This driver can also be built as a module. If so, the module 1787 will be called nct7802. 1788 1789config SENSORS_NCT7904 1790 tristate "Nuvoton NCT7904" 1791 depends on I2C && WATCHDOG 1792 select WATCHDOG_CORE 1793 help 1794 If you say yes here you get support for the Nuvoton NCT7904 1795 hardware monitoring chip, including manual fan speed control 1796 and support for the integrated watchdog. 1797 1798 This driver can also be built as a module. If so, the module 1799 will be called nct7904. 1800 1801config SENSORS_NPCM7XX 1802 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1803 imply THERMAL 1804 help 1805 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1806 and Fan controllers. 1807 1808 This driver can also be built as a module. If so, the module 1809 will be called npcm750-pwm-fan. 1810 1811config SENSORS_NSA320 1812 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1813 depends on GPIOLIB && OF 1814 depends on MACH_KIRKWOOD || COMPILE_TEST 1815 help 1816 If you say yes here you get support for hardware monitoring 1817 for the ZyXEL NSA320 Media Server and other compatible devices 1818 (probably the NSA325 and some NSA310 variants). 1819 1820 The sensor data is taken from a Holtek HT46R065 microcontroller 1821 connected to GPIO lines. 1822 1823 This driver can also be built as a module. If so, the module 1824 will be called nsa320-hwmon. 1825 1826config SENSORS_NZXT_KRAKEN2 1827 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1828 depends on USB_HID 1829 help 1830 If you say yes here you get support for hardware monitoring for the 1831 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1832 1833 This driver can also be built as a module. If so, the module 1834 will be called nzxt-kraken2. 1835 1836config SENSORS_NZXT_KRAKEN3 1837 tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" 1838 depends on USB_HID 1839 help 1840 If you say yes here you get support for hardware monitoring for the 1841 NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. 1842 1843 This driver can also be built as a module. If so, the module 1844 will be called nzxt-kraken3. 1845 1846config SENSORS_NZXT_SMART2 1847 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1848 depends on USB_HID 1849 help 1850 If you say yes here you get support for hardware monitoring for the 1851 NZXT RGB & Fan Controller/Smart Device v2. 1852 1853 This driver can also be built as a module. If so, the module 1854 will be called nzxt-smart2. 1855 1856source "drivers/hwmon/occ/Kconfig" 1857 1858config SENSORS_PCF8591 1859 tristate "Philips PCF8591 ADC/DAC" 1860 depends on I2C 1861 help 1862 If you say yes here you get support for Philips PCF8591 4-channel 1863 ADC, 1-channel DAC chips. 1864 1865 This driver can also be built as a module. If so, the module 1866 will be called pcf8591. 1867 1868 These devices are hard to detect and rarely found on mainstream 1869 hardware. If unsure, say N. 1870 1871source "drivers/hwmon/peci/Kconfig" 1872 1873source "drivers/hwmon/pmbus/Kconfig" 1874 1875config SENSORS_PT5161L 1876 tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" 1877 depends on I2C 1878 help 1879 If you say yes here you get support for temperature monitoring 1880 on the Astera Labs PT5161L PCIe retimer. 1881 1882 This driver can also be built as a module. If so, the module 1883 will be called pt5161l. 1884 1885config SENSORS_PWM_FAN 1886 tristate "PWM fan" 1887 depends on PWM || COMPILE_TEST 1888 depends on THERMAL || THERMAL=n 1889 help 1890 If you say yes here you get support for fans connected to PWM lines. 1891 The driver uses the generic PWM interface, thus it will work on a 1892 variety of SoCs. 1893 1894 This driver can also be built as a module. If so, the module 1895 will be called pwm-fan. 1896 1897config SENSORS_QNAP_MCU_HWMON 1898 tristate "QNAP MCU hardware monitoring" 1899 depends on MFD_QNAP_MCU 1900 depends on THERMAL || THERMAL=n 1901 help 1902 Say yes here to enable support for fan and temperature sensor 1903 connected to a QNAP MCU, as found in a number of QNAP network 1904 attached storage devices. 1905 1906 This driver can also be built as a module. If so, the module 1907 will be called qnap-mcu-hwmon. 1908 1909config SENSORS_RASPBERRYPI_HWMON 1910 tristate "Raspberry Pi voltage monitor" 1911 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1912 help 1913 If you say yes here you get support for voltage sensor on the 1914 Raspberry Pi. 1915 1916 This driver can also be built as a module. If so, the module 1917 will be called raspberrypi-hwmon. 1918 1919config SENSORS_SL28CPLD 1920 tristate "Kontron sl28cpld hardware monitoring driver" 1921 depends on MFD_SL28CPLD || COMPILE_TEST 1922 help 1923 If you say yes here you get support for the fan supervisor of the 1924 sl28cpld board management controller. 1925 1926 This driver can also be built as a module. If so, the module 1927 will be called sl28cpld-hwmon. 1928 1929config SENSORS_SBTSI 1930 tristate "Emulated SB-TSI temperature sensor" 1931 depends on I2C 1932 help 1933 If you say yes here you get support for emulated temperature 1934 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1935 1936 This driver can also be built as a module. If so, the module will 1937 be called sbtsi_temp. 1938 1939config SENSORS_SHT15 1940 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1941 depends on GPIOLIB || COMPILE_TEST 1942 select BITREVERSE 1943 help 1944 If you say yes here you get support for the Sensiron SHT10, SHT11, 1945 SHT15, SHT71, SHT75 humidity and temperature sensors. 1946 1947 This driver can also be built as a module. If so, the module 1948 will be called sht15. 1949 1950config SENSORS_SHT21 1951 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1952 depends on I2C 1953 help 1954 If you say yes here you get support for the Sensiron SHT20, SHT21, 1955 SHT25 humidity and temperature sensors. 1956 1957 This driver can also be built as a module. If so, the module 1958 will be called sht21. 1959 1960config SENSORS_SHT3x 1961 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1962 depends on I2C 1963 select CRC8 1964 help 1965 If you say yes here you get support for the Sensiron SHT30, SHT31 and 1966 SHT85 humidity and temperature sensors. 1967 1968 This driver can also be built as a module. If so, the module 1969 will be called sht3x. 1970 1971config SENSORS_SHT4x 1972 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1973 depends on I2C 1974 select CRC8 1975 help 1976 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1977 SHT45 humidity and temperature sensors. 1978 1979 This driver can also be built as a module. If so, the module 1980 will be called sht4x. 1981 1982config SENSORS_SHTC1 1983 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1984 depends on I2C 1985 help 1986 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1987 and SHTC3 humidity and temperature sensors. 1988 1989 This driver can also be built as a module. If so, the module 1990 will be called shtc1. 1991 1992config SENSORS_SIS5595 1993 tristate "Silicon Integrated Systems Corp. SiS5595" 1994 depends on PCI && HAS_IOPORT 1995 help 1996 If you say yes here you get support for the integrated sensors in 1997 SiS5595 South Bridges. 1998 1999 This driver can also be built as a module. If so, the module 2000 will be called sis5595. 2001 2002config SENSORS_SY7636A 2003 tristate "Silergy SY7636A" 2004 depends on MFD_SY7636A 2005 help 2006 If you say yes here you get support for the thermistor readout of 2007 the Silergy SY7636A PMIC. 2008 2009 This driver can also be built as a module. If so, the module 2010 will be called sy7636a-hwmon. 2011 2012config SENSORS_DME1737 2013 tristate "SMSC DME1737, SCH311x and compatibles" 2014 depends on HAS_IOPORT 2015 depends on I2C && !PPC 2016 select HWMON_VID 2017 help 2018 If you say yes here you get support for the hardware monitoring 2019 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 2020 Asus A8000 Super-I/O chips. 2021 2022 This driver can also be built as a module. If so, the module 2023 will be called dme1737. 2024 2025config SENSORS_EMC1403 2026 tristate "SMSC EMC1403/23 thermal sensor" 2027 depends on I2C 2028 select REGMAP_I2C 2029 help 2030 If you say yes here you get support for the SMSC EMC1403/23 2031 temperature monitoring chip. 2032 2033 Threshold values can be configured using sysfs. 2034 Data from the different diodes are accessible via sysfs. 2035 2036config SENSORS_EMC2103 2037 tristate "SMSC EMC2103" 2038 depends on I2C 2039 help 2040 If you say yes here you get support for the temperature 2041 and fan sensors of the SMSC EMC2103 chips. 2042 2043 This driver can also be built as a module. If so, the module 2044 will be called emc2103. 2045 2046config SENSORS_EMC2305 2047 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 2048 depends on I2C 2049 imply THERMAL 2050 help 2051 If you say yes here you get support for the Microchip EMC2305 2052 fan controller chips. 2053 The Microchip EMC2305 is a fan controller for up to 5 fans. 2054 Fan rotation speeds are reported in RPM. 2055 2056 This driver can also be built as a module. If so, the module 2057 will be called emc2305. 2058 2059config SENSORS_EMC6W201 2060 tristate "SMSC EMC6W201" 2061 depends on I2C 2062 help 2063 If you say yes here you get support for the SMSC EMC6W201 2064 hardware monitoring chip. 2065 2066 This driver can also be built as a module. If so, the module 2067 will be called emc6w201. 2068 2069config SENSORS_SMSC47M1 2070 tristate "SMSC LPC47M10x and compatibles" 2071 depends on HAS_IOPORT 2072 depends on !PPC 2073 help 2074 If you say yes here you get support for the integrated fan 2075 monitoring and control capabilities of the SMSC LPC47B27x, 2076 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 2077 LPC47M192, LPC47M292 and LPC47M997 chips. 2078 2079 The temperature and voltage sensor features of the LPC47M15x, 2080 LPC47M192, LPC47M292 and LPC47M997 are supported by another 2081 driver, select also "SMSC LPC47M192 and compatibles" below for 2082 those. 2083 2084 This driver can also be built as a module. If so, the module 2085 will be called smsc47m1. 2086 2087config SENSORS_SMSC47M192 2088 tristate "SMSC LPC47M192 and compatibles" 2089 depends on I2C 2090 select HWMON_VID 2091 help 2092 If you say yes here you get support for the temperature and 2093 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 2094 and LPC47M997 chips. 2095 2096 The fan monitoring and control capabilities of these chips 2097 are supported by another driver, select 2098 "SMSC LPC47M10x and compatibles" above. You need both drivers 2099 if you want fan control and voltage/temperature sensor support. 2100 2101 This driver can also be built as a module. If so, the module 2102 will be called smsc47m192. 2103 2104config SENSORS_SMSC47B397 2105 tristate "SMSC LPC47B397-NC" 2106 depends on HAS_IOPORT 2107 depends on !PPC 2108 help 2109 If you say yes here you get support for the SMSC LPC47B397-NC 2110 sensor chip. 2111 2112 This driver can also be built as a module. If so, the module 2113 will be called smsc47b397. 2114 2115config SENSORS_SCH56XX_COMMON 2116 tristate 2117 select REGMAP 2118 2119config SENSORS_SCH5627 2120 tristate "SMSC SCH5627" 2121 depends on HAS_IOPORT 2122 depends on !PPC && WATCHDOG 2123 select SENSORS_SCH56XX_COMMON 2124 select WATCHDOG_CORE 2125 help 2126 If you say yes here you get support for the hardware monitoring 2127 features of the SMSC SCH5627 Super-I/O chip including support for 2128 the integrated watchdog. 2129 2130 This driver can also be built as a module. If so, the module 2131 will be called sch5627. 2132 2133config SENSORS_SCH5636 2134 tristate "SMSC SCH5636" 2135 depends on HAS_IOPORT 2136 depends on !PPC && WATCHDOG 2137 select SENSORS_SCH56XX_COMMON 2138 select WATCHDOG_CORE 2139 help 2140 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 2141 hardware monitoring solutions, allowing motherboard manufacturers to 2142 create their own custom hwmon solution based upon the SCH5636. 2143 2144 Currently this driver only supports the Fujitsu Theseus SCH5636 based 2145 hwmon solution. Say yes here if you want support for the Fujitsu 2146 Theseus' hardware monitoring features including support for the 2147 integrated watchdog. 2148 2149 This driver can also be built as a module. If so, the module 2150 will be called sch5636. 2151 2152config SENSORS_STTS751 2153 tristate "ST Microelectronics STTS751" 2154 depends on I2C 2155 help 2156 If you say yes here you get support for STTS751 2157 temperature sensor chips. 2158 2159 This driver can also be built as a module. If so, the module 2160 will be called stts751. 2161 2162config SENSORS_SFCTEMP 2163 tristate "Starfive JH71x0 temperature sensor" 2164 depends on ARCH_STARFIVE || COMPILE_TEST 2165 help 2166 If you say yes here you get support for temperature sensor 2167 on the Starfive JH71x0 SoCs. 2168 2169 This driver can also be built as a module. If so, the module 2170 will be called sfctemp. 2171 2172config SENSORS_SG2042_MCU 2173 tristate "Sophgo onboard MCU support" 2174 depends on I2C 2175 depends on ARCH_SOPHGO || COMPILE_TEST 2176 help 2177 Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides 2178 power control and some basic information. 2179 2180 This driver can be built as a module. If so, the module 2181 will be called sg2042-mcu. 2182 2183config SENSORS_SURFACE_FAN 2184 tristate "Surface Fan Driver" 2185 depends on SURFACE_AGGREGATOR 2186 depends on SURFACE_AGGREGATOR_BUS 2187 help 2188 Driver that provides monitoring of the fan on Surface Pro devices that 2189 have a fan, like the Surface Pro 9. 2190 2191 This makes the fan's current speed accessible through the hwmon 2192 system. It does not provide control over the fan, the firmware is 2193 responsible for that, this driver merely provides monitoring. 2194 2195 Select M or Y here, if you want to be able to read the fan's speed. 2196 2197config SENSORS_SURFACE_TEMP 2198 tristate "Microsoft Surface Thermal Sensor Driver" 2199 depends on SURFACE_AGGREGATOR 2200 depends on SURFACE_AGGREGATOR_BUS 2201 help 2202 Driver for monitoring thermal sensors connected via the Surface 2203 Aggregator Module (embedded controller) on Microsoft Surface devices. 2204 2205 This driver can also be built as a module. If so, the module 2206 will be called surface_temp. 2207 2208config SENSORS_ADC128D818 2209 tristate "Texas Instruments ADC128D818" 2210 depends on I2C 2211 help 2212 If you say yes here you get support for the Texas Instruments 2213 ADC128D818 System Monitor with Temperature Sensor chip. 2214 2215 This driver can also be built as a module. If so, the module 2216 will be called adc128d818. 2217 2218config SENSORS_ADS7828 2219 tristate "Texas Instruments ADS7828 and compatibles" 2220 depends on I2C 2221 select REGMAP_I2C 2222 help 2223 If you say yes here you get support for Texas Instruments ADS7828 and 2224 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 2225 it is 8-bit on ADS7830. 2226 2227 This driver can also be built as a module. If so, the module 2228 will be called ads7828. 2229 2230config SENSORS_ADS7871 2231 tristate "Texas Instruments ADS7871 A/D converter" 2232 depends on SPI 2233 help 2234 If you say yes here you get support for TI ADS7871 & ADS7870 2235 2236 This driver can also be built as a module. If so, the module 2237 will be called ads7871. 2238 2239config SENSORS_AMC6821 2240 tristate "Texas Instruments AMC6821" 2241 depends on I2C 2242 select REGMAP_I2C 2243 help 2244 If you say yes here you get support for the Texas Instruments 2245 AMC6821 hardware monitoring chips. 2246 2247 This driver can also be built as a module. If so, the module 2248 will be called amc6821. 2249 2250config SENSORS_INA209 2251 tristate "TI / Burr Brown INA209" 2252 depends on I2C 2253 help 2254 If you say yes here you get support for the TI / Burr Brown INA209 2255 voltage / current / power monitor I2C interface. 2256 2257 This driver can also be built as a module. If so, the module will 2258 be called ina209. 2259 2260config SENSORS_INA2XX 2261 tristate "Texas Instruments INA219 and compatibles" 2262 depends on I2C 2263 select REGMAP_I2C 2264 help 2265 If you say yes here you get support for INA219, INA220, INA226, 2266 INA230, INA231, INA234, INA260, and SY24655 power monitor chips. 2267 2268 The INA2xx driver is configured for the default configuration of 2269 the part as described in the datasheet. 2270 Default value for Rshunt is 10 mOhms except for INA260 which has an 2271 internal 2 mOhm shunt resistor. 2272 This driver can also be built as a module. If so, the module 2273 will be called ina2xx. 2274 2275config SENSORS_INA238 2276 tristate "Texas Instruments INA238 and compatibles" 2277 depends on I2C 2278 select REGMAP_I2C 2279 help 2280 If you say yes here you get support for INA228, INA237, INA238, 2281 INA700, INA780, and SQ52206 power monitor chips. This driver supports 2282 voltage, current, power, energy, and temperature measurements as well 2283 as alarm configuration. 2284 2285 This driver can also be built as a module. If so, the module 2286 will be called ina238. 2287 2288config SENSORS_INA3221 2289 tristate "Texas Instruments INA3221 Triple Power Monitor" 2290 depends on I2C 2291 select REGMAP_I2C 2292 help 2293 If you say yes here you get support for the TI INA3221 Triple Power 2294 Monitor. 2295 2296 This driver can also be built as a module. If so, the module 2297 will be called ina3221. 2298 2299config SENSORS_SPD5118 2300 tristate "SPD5118 Compliant Temperature Sensors" 2301 depends on I2C 2302 select REGMAP_I2C 2303 help 2304 If you say yes here you get support for SPD5118 (JEDEC JESD300) 2305 compliant temperature sensors. Such sensors are found on DDR5 memory 2306 modules. 2307 2308 This driver can also be built as a module. If so, the module 2309 will be called spd5118. 2310 2311config SENSORS_SPD5118_DETECT 2312 bool "Enable detect function" 2313 depends on SENSORS_SPD5118 2314 default (!DMI || !X86) 2315 help 2316 If enabled, the driver auto-detects if a chip in the SPD address 2317 range is compliant to the SPD51888 standard and auto-instantiates 2318 if that is the case. If disabled, SPD5118 compliant devices have 2319 to be instantiated by other means. On X86 systems with DMI support 2320 this will typically be done from DMI DDR detection code in the 2321 I2C SMBus subsystem. Devicetree based systems will instantiate 2322 attached devices if the DIMMs are listed in the devicetree file. 2323 2324 Disabling the detect function will speed up boot time and reduce 2325 the risk of mis-detecting SPD5118 compliant devices. However, it 2326 may result in missed DIMMs under some circumstances. 2327 2328 If unsure, say Y. 2329 2330config SENSORS_TC74 2331 tristate "Microchip TC74" 2332 depends on I2C 2333 help 2334 If you say yes here you get support for Microchip TC74 single 2335 input temperature sensor chips. 2336 2337 This driver can also be built as a module. If so, the module 2338 will be called tc74. 2339 2340config SENSORS_THMC50 2341 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2342 depends on I2C 2343 help 2344 If you say yes here you get support for Texas Instruments THMC50 2345 sensor chips and clones: the Analog Devices ADM1022. 2346 2347 This driver can also be built as a module. If so, the module 2348 will be called thmc50. 2349 2350config SENSORS_TMP102 2351 tristate "Texas Instruments TMP102" 2352 depends on I2C 2353 select REGMAP_I2C 2354 help 2355 If you say yes here you get support for Texas Instruments TMP102, 2356 TMP110 and TMP113 sensor chips. 2357 2358 This driver can also be built as a module. If so, the module 2359 will be called tmp102. 2360 2361config SENSORS_TMP103 2362 tristate "Texas Instruments TMP103" 2363 depends on I2C 2364 select REGMAP_I2C 2365 help 2366 If you say yes here you get support for Texas Instruments TMP103 2367 sensor chips. 2368 2369 This driver can also be built as a module. If so, the module 2370 will be called tmp103. 2371 2372config SENSORS_TMP108 2373 tristate "Texas Instruments TMP108" 2374 depends on I3C_OR_I2C 2375 select REGMAP_I2C 2376 select REGMAP_I3C if I3C 2377 help 2378 If you say yes here you get support for Texas Instruments TMP108 2379 sensor chips, NXP temperature sensors P3T1035, P3T1085 and P3T2030. 2380 2381 This driver can also be built as a module. If so, the module 2382 will be called tmp108. 2383 2384config SENSORS_TMP401 2385 tristate "Texas Instruments TMP401 and compatibles" 2386 depends on I2C 2387 select REGMAP 2388 help 2389 If you say yes here you get support for Texas Instruments TMP401, 2390 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2391 2392 This driver can also be built as a module. If so, the module 2393 will be called tmp401. 2394 2395config SENSORS_TMP421 2396 tristate "Texas Instruments TMP421 and compatible" 2397 depends on I2C 2398 help 2399 If you say yes here you get support for Texas Instruments TMP421, 2400 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2401 2402 This driver can also be built as a module. If so, the module 2403 will be called tmp421. 2404 2405config SENSORS_TMP464 2406 tristate "Texas Instruments TMP464 and compatible" 2407 depends on I2C 2408 select REGMAP_I2C 2409 help 2410 If you say yes here you get support for Texas Instruments TMP464 2411 and TMP468 temperature sensor chips. 2412 2413 This driver can also be built as a module. If so, the module 2414 will be called tmp464. 2415 2416config SENSORS_TMP513 2417 tristate "Texas Instruments TMP513 and compatibles" 2418 depends on I2C 2419 select REGMAP_I2C 2420 help 2421 If you say yes here you get support for Texas Instruments TMP512, 2422 and TMP513 temperature and power supply sensor chips. 2423 2424 This driver can also be built as a module. If so, the module 2425 will be called tmp513. 2426 2427config SENSORS_TSC1641 2428 tristate "ST Microelectronics TSC1641 Power Monitor" 2429 depends on I2C 2430 select REGMAP_I2C 2431 help 2432 If you say yes here you get support for TSC1641 power monitor chip. 2433 The TSC1641 driver is configured for the default configuration of 2434 the part except temperature is enabled by default. 2435 2436 This driver can also be built as a module. If so, the module 2437 will be called tsc1641. 2438 2439config SENSORS_VEXPRESS 2440 tristate "Versatile Express" 2441 depends on VEXPRESS_CONFIG 2442 help 2443 This driver provides support for hardware sensors available on 2444 the ARM Ltd's Versatile Express platform. It can provide wide 2445 range of information like temperature, power, energy. 2446 2447config SENSORS_VIA_CPUTEMP 2448 tristate "VIA CPU temperature sensor" 2449 depends on X86 2450 select HWMON_VID 2451 help 2452 If you say yes here you get support for the temperature 2453 sensor inside your CPU. Supported are all known variants of 2454 the VIA C7 and Nano. 2455 2456config SENSORS_VIA686A 2457 tristate "VIA686A" 2458 depends on PCI && HAS_IOPORT 2459 help 2460 If you say yes here you get support for the integrated sensors in 2461 Via 686A/B South Bridges. 2462 2463 This driver can also be built as a module. If so, the module 2464 will be called via686a. 2465 2466config SENSORS_VT1211 2467 tristate "VIA VT1211" 2468 depends on HAS_IOPORT 2469 depends on !PPC 2470 select HWMON_VID 2471 help 2472 If you say yes here then you get support for hardware monitoring 2473 features of the VIA VT1211 Super-I/O chip. 2474 2475 This driver can also be built as a module. If so, the module 2476 will be called vt1211. 2477 2478config SENSORS_VT8231 2479 tristate "VIA VT8231" 2480 depends on PCI && HAS_IOPORT 2481 select HWMON_VID 2482 help 2483 If you say yes here then you get support for the integrated sensors 2484 in the VIA VT8231 device. 2485 2486 This driver can also be built as a module. If so, the module 2487 will be called vt8231. 2488 2489config SENSORS_W83773G 2490 tristate "Nuvoton W83773G" 2491 depends on I2C 2492 select REGMAP_I2C 2493 help 2494 If you say yes here you get support for the Nuvoton W83773G hardware 2495 monitoring chip. 2496 2497 This driver can also be built as a module. If so, the module 2498 will be called w83773g. 2499 2500config SENSORS_W83781D 2501 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2502 depends on I2C 2503 select HWMON_VID 2504 help 2505 If you say yes here you get support for the Winbond W8378x series 2506 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2507 Asus AS99127F. 2508 2509 This driver can also be built as a module. If so, the module 2510 will be called w83781d. 2511 2512config SENSORS_W83791D 2513 tristate "Winbond W83791D" 2514 depends on I2C 2515 select HWMON_VID 2516 help 2517 If you say yes here you get support for the Winbond W83791D chip. 2518 2519 This driver can also be built as a module. If so, the module 2520 will be called w83791d. 2521 2522config SENSORS_W83792D 2523 tristate "Winbond W83792D" 2524 depends on I2C 2525 help 2526 If you say yes here you get support for the Winbond W83792D chip. 2527 2528 This driver can also be built as a module. If so, the module 2529 will be called w83792d. 2530 2531config SENSORS_W83793 2532 tristate "Winbond W83793" 2533 depends on I2C 2534 select HWMON_VID 2535 help 2536 If you say yes here you get support for the Winbond W83793 2537 hardware monitoring chip, including support for the integrated 2538 watchdog. 2539 2540 This driver can also be built as a module. If so, the module 2541 will be called w83793. 2542 2543config SENSORS_W83795 2544 tristate "Winbond/Nuvoton W83795G/ADG" 2545 depends on I2C 2546 help 2547 If you say yes here you get support for the Winbond W83795G and 2548 W83795ADG hardware monitoring chip, including manual fan speed 2549 control. 2550 2551 This driver can also be built as a module. If so, the module 2552 will be called w83795. 2553 2554config SENSORS_W83795_FANCTRL 2555 bool "Include automatic fan control support" 2556 depends on SENSORS_W83795 2557 help 2558 If you say yes here, support for automatic fan speed control 2559 will be included in the driver. 2560 2561 Please also note that this option will create sysfs attribute 2562 files which may change in the future, so you shouldn't rely 2563 on them being stable. 2564 2565config SENSORS_W83L785TS 2566 tristate "Winbond W83L785TS-S" 2567 depends on I2C 2568 help 2569 If you say yes here you get support for the Winbond W83L785TS-S 2570 sensor chip, which is used on the Asus A7N8X, among other 2571 motherboards. 2572 2573 This driver can also be built as a module. If so, the module 2574 will be called w83l785ts. 2575 2576config SENSORS_W83L786NG 2577 tristate "Winbond W83L786NG, W83L786NR" 2578 depends on I2C 2579 help 2580 If you say yes here you get support for the Winbond W83L786NG 2581 and W83L786NR sensor chips. 2582 2583 This driver can also be built as a module. If so, the module 2584 will be called w83l786ng. 2585 2586config SENSORS_W83627HF 2587 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2588 depends on HAS_IOPORT 2589 depends on !PPC 2590 select HWMON_VID 2591 help 2592 If you say yes here you get support for the Winbond W836X7 series 2593 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2594 W83697HF. 2595 2596 This driver can also be built as a module. If so, the module 2597 will be called w83627hf. 2598 2599config SENSORS_W83627EHF 2600 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2601 depends on HAS_IOPORT 2602 depends on !PPC 2603 select HWMON_VID 2604 help 2605 If you say yes here you get support for the hardware 2606 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2607 2608 This driver also supports the W83627EHG, which is the lead-free 2609 version of the W83627EHF, and the W83627DHG, which is a similar 2610 chip suited for specific Intel processors that use PECI such as 2611 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2612 version of the W83627DHG (as far as hardware monitoring goes.) 2613 2614 This driver also supports Nuvoton W83667HG and W83667HG-B. 2615 2616 This driver can also be built as a module. If so, the module 2617 will be called w83627ehf. 2618 2619config SENSORS_WM831X 2620 tristate "WM831x PMICs" 2621 depends on MFD_WM831X 2622 help 2623 If you say yes here you get support for the hardware 2624 monitoring functionality of the Wolfson Microelectronics 2625 WM831x series of PMICs. 2626 2627 This driver can also be built as a module. If so, the module 2628 will be called wm831x-hwmon. 2629 2630config SENSORS_WM8350 2631 tristate "Wolfson Microelectronics WM835x" 2632 depends on MFD_WM8350 2633 help 2634 If you say yes here you get support for the hardware 2635 monitoring features of the WM835x series of PMICs. 2636 2637 This driver can also be built as a module. If so, the module 2638 will be called wm8350-hwmon. 2639 2640config SENSORS_ULTRA45 2641 tristate "Sun Ultra45 PIC16F747" 2642 depends on SPARC64 2643 help 2644 This driver provides support for the Ultra45 workstation environmental 2645 sensors. 2646 2647config SENSORS_XGENE 2648 tristate "APM X-Gene SoC hardware monitoring driver" 2649 depends on XGENE_SLIMPRO_MBOX || PCC 2650 help 2651 If you say yes here you get support for the temperature 2652 and power sensors for APM X-Gene SoC. 2653 2654config SENSORS_INTEL_M10_BMC_HWMON 2655 tristate "Intel MAX10 BMC Hardware Monitoring" 2656 depends on MFD_INTEL_M10_BMC_CORE 2657 help 2658 This driver provides support for the hardware monitoring functionality 2659 on Intel MAX10 BMC chip. 2660 2661 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2662 sensors monitor various telemetry data of different components on the 2663 card, e.g. board temperature, FPGA core temperature/voltage/current. 2664 2665if ACPI 2666 2667comment "ACPI drivers" 2668 2669config SENSORS_ACPI_POWER 2670 tristate "ACPI 4.0 power meter" 2671 help 2672 This driver exposes ACPI 4.0 power meters as hardware monitoring 2673 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2674 and a power meter. 2675 2676 To compile this driver as a module, choose M here: 2677 the module will be called acpi_power_meter. 2678 2679config SENSORS_ATK0110 2680 tristate "ASUS ATK0110" 2681 depends on X86 2682 help 2683 If you say yes here you get support for the ACPI hardware 2684 monitoring interface found in many ASUS motherboards. This 2685 driver will provide readings of fans, voltages and temperatures 2686 through the system firmware. 2687 2688 This driver can also be built as a module. If so, the module 2689 will be called asus_atk0110. 2690 2691config SENSORS_ASUS_WMI 2692 tristate "ASUS WMI X370/X470/B450/X399" 2693 depends on ACPI_WMI 2694 help 2695 If you say yes here you get support for the ACPI hardware monitoring 2696 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2697 will provide readings of fans, voltages and temperatures through the system 2698 firmware. 2699 2700 This driver can also be built as a module. If so, the module 2701 will be called asus_wmi_sensors. 2702 2703config SENSORS_ASUS_EC 2704 tristate "ASUS EC Sensors" 2705 depends on X86 2706 depends on ACPI_EC 2707 help 2708 If you say yes here you get support for the ACPI embedded controller 2709 hardware monitoring interface found in some ASUS motherboards. This is 2710 where such sensors as water flow and temperature, optional fans, and 2711 additional temperature sensors (T_Sensor, chipset temperatures) 2712 find themselves. 2713 2714 This driver can also be built as a module. If so, the module 2715 will be called asus_ec_sensors. 2716 2717config SENSORS_HP_WMI 2718 tristate "HP WMI Sensors" 2719 depends on ACPI_WMI 2720 help 2721 If you say yes here you get support for the ACPI hardware monitoring 2722 interface found in HP (and some HP Compaq) business-class computers. 2723 Available sensors vary between systems. Temperature and fan speed 2724 sensors are the most common. 2725 2726 This driver can also be built as a module. If so, the module 2727 will be called hp_wmi_sensors. 2728 2729endif # ACPI 2730 2731endif # HWMON 2732