1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * HID driver for UC-Logic devices not fully compliant with HID standard 4 * 5 * Copyright (c) 2010-2014 Nikolai Kondrashov 6 * Copyright (c) 2013 Martin Rusko 7 */ 8 9 /* 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the Free 12 * Software Foundation; either version 2 of the License, or (at your option) 13 * any later version. 14 */ 15 16 #include <linux/device.h> 17 #include <linux/hid.h> 18 #include <linux/module.h> 19 #include <linux/timer.h> 20 #include "usbhid/usbhid.h" 21 #include "hid-uclogic-params.h" 22 23 #include "hid-ids.h" 24 25 /* Driver data */ 26 struct uclogic_drvdata { 27 /* Interface parameters */ 28 struct uclogic_params params; 29 /* Pointer to the replacement report descriptor. NULL if none. */ 30 __u8 *desc_ptr; 31 /* 32 * Size of the replacement report descriptor. 33 * Only valid if desc_ptr is not NULL 34 */ 35 unsigned int desc_size; 36 /* Pen input device */ 37 struct input_dev *pen_input; 38 /* In-range timer */ 39 struct timer_list inrange_timer; 40 /* Last rotary encoder state, or U8_MAX for none */ 41 u8 re_state; 42 }; 43 44 /** 45 * uclogic_inrange_timeout - handle pen in-range state timeout. 46 * Emulate input events normally generated when pen goes out of range for 47 * tablets which don't report that. 48 * 49 * @t: The timer the timeout handler is attached to, stored in a struct 50 * uclogic_drvdata. 51 */ 52 static void uclogic_inrange_timeout(struct timer_list *t) 53 { 54 struct uclogic_drvdata *drvdata = from_timer(drvdata, t, 55 inrange_timer); 56 struct input_dev *input = drvdata->pen_input; 57 58 if (input == NULL) 59 return; 60 input_report_abs(input, ABS_PRESSURE, 0); 61 /* If BTN_TOUCH state is changing */ 62 if (test_bit(BTN_TOUCH, input->key)) { 63 input_event(input, EV_MSC, MSC_SCAN, 64 /* Digitizer Tip Switch usage */ 65 0xd0042); 66 input_report_key(input, BTN_TOUCH, 0); 67 } 68 input_report_key(input, BTN_TOOL_PEN, 0); 69 input_sync(input); 70 } 71 72 static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc, 73 unsigned int *rsize) 74 { 75 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 76 77 if (drvdata->desc_ptr != NULL) { 78 rdesc = drvdata->desc_ptr; 79 *rsize = drvdata->desc_size; 80 } 81 return rdesc; 82 } 83 84 static int uclogic_input_mapping(struct hid_device *hdev, 85 struct hid_input *hi, 86 struct hid_field *field, 87 struct hid_usage *usage, 88 unsigned long **bit, 89 int *max) 90 { 91 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 92 struct uclogic_params *params = &drvdata->params; 93 94 /* Discard invalid pen usages */ 95 if (params->pen.usage_invalid && (field->application == HID_DG_PEN)) 96 return -1; 97 98 /* Let hid-core decide what to do */ 99 return 0; 100 } 101 102 static int uclogic_input_configured(struct hid_device *hdev, 103 struct hid_input *hi) 104 { 105 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 106 struct uclogic_params *params = &drvdata->params; 107 char *name; 108 const char *suffix = NULL; 109 struct hid_field *field; 110 size_t len; 111 size_t i; 112 const struct uclogic_params_frame *frame; 113 114 /* no report associated (HID_QUIRK_MULTI_INPUT not set) */ 115 if (!hi->report) 116 return 0; 117 118 /* 119 * If this is the input corresponding to the pen report 120 * in need of tweaking. 121 */ 122 if (hi->report->id == params->pen.id) { 123 /* Remember the input device so we can simulate events */ 124 drvdata->pen_input = hi->input; 125 } 126 127 /* If it's one of the frame devices */ 128 for (i = 0; i < ARRAY_SIZE(params->frame_list); i++) { 129 frame = ¶ms->frame_list[i]; 130 if (hi->report->id == frame->id) { 131 /* Assign custom suffix, if any */ 132 suffix = frame->suffix; 133 /* 134 * Disable EV_MSC reports for touch ring interfaces to 135 * make the Wacom driver pickup touch ring extents 136 */ 137 if (frame->touch_ring_byte > 0) 138 __clear_bit(EV_MSC, hi->input->evbit); 139 } 140 } 141 142 if (!suffix) { 143 field = hi->report->field[0]; 144 145 switch (field->application) { 146 case HID_GD_KEYBOARD: 147 suffix = "Keyboard"; 148 break; 149 case HID_GD_MOUSE: 150 suffix = "Mouse"; 151 break; 152 case HID_GD_KEYPAD: 153 suffix = "Pad"; 154 break; 155 case HID_DG_PEN: 156 suffix = "Pen"; 157 break; 158 case HID_CP_CONSUMER_CONTROL: 159 suffix = "Consumer Control"; 160 break; 161 case HID_GD_SYSTEM_CONTROL: 162 suffix = "System Control"; 163 break; 164 } 165 } 166 167 if (suffix) { 168 len = strlen(hdev->name) + 2 + strlen(suffix); 169 name = devm_kzalloc(&hi->input->dev, len, GFP_KERNEL); 170 if (name) { 171 snprintf(name, len, "%s %s", hdev->name, suffix); 172 hi->input->name = name; 173 } 174 } 175 176 return 0; 177 } 178 179 static int uclogic_probe(struct hid_device *hdev, 180 const struct hid_device_id *id) 181 { 182 int rc; 183 struct uclogic_drvdata *drvdata = NULL; 184 bool params_initialized = false; 185 186 if (!hid_is_usb(hdev)) 187 return -EINVAL; 188 189 /* 190 * libinput requires the pad interface to be on a different node 191 * than the pen, so use QUIRK_MULTI_INPUT for all tablets. 192 */ 193 hdev->quirks |= HID_QUIRK_MULTI_INPUT; 194 195 /* Allocate and assign driver data */ 196 drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL); 197 if (drvdata == NULL) { 198 rc = -ENOMEM; 199 goto failure; 200 } 201 timer_setup(&drvdata->inrange_timer, uclogic_inrange_timeout, 0); 202 drvdata->re_state = U8_MAX; 203 hid_set_drvdata(hdev, drvdata); 204 205 /* Initialize the device and retrieve interface parameters */ 206 rc = uclogic_params_init(&drvdata->params, hdev); 207 if (rc != 0) { 208 hid_err(hdev, "failed probing parameters: %d\n", rc); 209 goto failure; 210 } 211 params_initialized = true; 212 hid_dbg(hdev, "parameters:\n"); 213 uclogic_params_hid_dbg(hdev, &drvdata->params); 214 if (drvdata->params.invalid) { 215 hid_info(hdev, "interface is invalid, ignoring\n"); 216 rc = -ENODEV; 217 goto failure; 218 } 219 220 /* Generate replacement report descriptor */ 221 rc = uclogic_params_get_desc(&drvdata->params, 222 &drvdata->desc_ptr, 223 &drvdata->desc_size); 224 if (rc) { 225 hid_err(hdev, 226 "failed generating replacement report descriptor: %d\n", 227 rc); 228 goto failure; 229 } 230 231 rc = hid_parse(hdev); 232 if (rc) { 233 hid_err(hdev, "parse failed\n"); 234 goto failure; 235 } 236 237 rc = hid_hw_start(hdev, HID_CONNECT_DEFAULT); 238 if (rc) { 239 hid_err(hdev, "hw start failed\n"); 240 goto failure; 241 } 242 243 return 0; 244 failure: 245 /* Assume "remove" might not be called if "probe" failed */ 246 if (params_initialized) 247 uclogic_params_cleanup(&drvdata->params); 248 return rc; 249 } 250 251 #ifdef CONFIG_PM 252 static int uclogic_resume(struct hid_device *hdev) 253 { 254 int rc; 255 struct uclogic_params params; 256 257 /* Re-initialize the device, but discard parameters */ 258 rc = uclogic_params_init(¶ms, hdev); 259 if (rc != 0) 260 hid_err(hdev, "failed to re-initialize the device\n"); 261 else 262 uclogic_params_cleanup(¶ms); 263 264 return rc; 265 } 266 #endif 267 268 /** 269 * uclogic_raw_event_pen - handle raw pen events (pen HID reports). 270 * 271 * @drvdata: Driver data. 272 * @data: Report data buffer, can be modified. 273 * @size: Report data size, bytes. 274 * 275 * Returns: 276 * Negative value on error (stops event delivery), zero for success. 277 */ 278 static int uclogic_raw_event_pen(struct uclogic_drvdata *drvdata, 279 u8 *data, int size) 280 { 281 struct uclogic_params_pen *pen = &drvdata->params.pen; 282 283 WARN_ON(drvdata == NULL); 284 WARN_ON(data == NULL && size != 0); 285 286 /* If in-range reports are inverted */ 287 if (pen->inrange == 288 UCLOGIC_PARAMS_PEN_INRANGE_INVERTED) { 289 /* Invert the in-range bit */ 290 data[1] ^= 0x40; 291 } 292 /* 293 * If report contains fragmented high-resolution pen 294 * coordinates 295 */ 296 if (size >= 10 && pen->fragmented_hires) { 297 u8 pressure_low_byte; 298 u8 pressure_high_byte; 299 300 /* Lift pressure bytes */ 301 pressure_low_byte = data[6]; 302 pressure_high_byte = data[7]; 303 /* 304 * Move Y coord to make space for high-order X 305 * coord byte 306 */ 307 data[6] = data[5]; 308 data[5] = data[4]; 309 /* Move high-order X coord byte */ 310 data[4] = data[8]; 311 /* Move high-order Y coord byte */ 312 data[7] = data[9]; 313 /* Place pressure bytes */ 314 data[8] = pressure_low_byte; 315 data[9] = pressure_high_byte; 316 } 317 /* If we need to emulate in-range detection */ 318 if (pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE) { 319 /* Set in-range bit */ 320 data[1] |= 0x40; 321 /* (Re-)start in-range timeout */ 322 mod_timer(&drvdata->inrange_timer, 323 jiffies + msecs_to_jiffies(100)); 324 } 325 /* If we report tilt and Y direction is flipped */ 326 if (size >= 12 && pen->tilt_y_flipped) 327 data[11] = -data[11]; 328 329 return 0; 330 } 331 332 /** 333 * uclogic_raw_event_frame - handle raw frame events (frame HID reports). 334 * 335 * @drvdata: Driver data. 336 * @frame: The parameters of the frame controls to handle. 337 * @data: Report data buffer, can be modified. 338 * @size: Report data size, bytes. 339 * 340 * Returns: 341 * Negative value on error (stops event delivery), zero for success. 342 */ 343 static int uclogic_raw_event_frame( 344 struct uclogic_drvdata *drvdata, 345 const struct uclogic_params_frame *frame, 346 u8 *data, int size) 347 { 348 WARN_ON(drvdata == NULL); 349 WARN_ON(data == NULL && size != 0); 350 351 /* If need to, and can, set pad device ID for Wacom drivers */ 352 if (frame->dev_id_byte > 0 && frame->dev_id_byte < size) { 353 /* If we also have a touch ring and the finger left it */ 354 if (frame->touch_ring_byte > 0 && 355 frame->touch_ring_byte < size && 356 data[frame->touch_ring_byte] == 0) { 357 data[frame->dev_id_byte] = 0; 358 } else { 359 data[frame->dev_id_byte] = 0xf; 360 } 361 } 362 363 /* If need to, and can, read rotary encoder state change */ 364 if (frame->re_lsb > 0 && frame->re_lsb / 8 < size) { 365 unsigned int byte = frame->re_lsb / 8; 366 unsigned int bit = frame->re_lsb % 8; 367 368 u8 change; 369 u8 prev_state = drvdata->re_state; 370 /* Read Gray-coded state */ 371 u8 state = (data[byte] >> bit) & 0x3; 372 /* Encode state change into 2-bit signed integer */ 373 if ((prev_state == 1 && state == 0) || 374 (prev_state == 2 && state == 3)) { 375 change = 1; 376 } else if ((prev_state == 2 && state == 0) || 377 (prev_state == 1 && state == 3)) { 378 change = 3; 379 } else { 380 change = 0; 381 } 382 /* Write change */ 383 data[byte] = (data[byte] & ~((u8)3 << bit)) | 384 (change << bit); 385 /* Remember state */ 386 drvdata->re_state = state; 387 } 388 389 /* If need to, and can, transform the touch ring reports */ 390 if (frame->touch_ring_byte > 0 && frame->touch_ring_byte < size && 391 frame->touch_ring_flip_at != 0) { 392 __s8 value = data[frame->touch_ring_byte]; 393 394 if (value != 0) { 395 value = frame->touch_ring_flip_at - value; 396 if (value < 0) 397 value = frame->touch_ring_max + value; 398 399 data[frame->touch_ring_byte] = value; 400 } 401 } 402 403 /* If need to, and can, transform the bitmap dial reports */ 404 if (frame->bitmap_dial_byte > 0 && frame->bitmap_dial_byte < size) { 405 if (data[frame->bitmap_dial_byte] == 2) 406 data[frame->bitmap_dial_byte] = -1; 407 } 408 409 return 0; 410 } 411 412 static int uclogic_raw_event(struct hid_device *hdev, 413 struct hid_report *report, 414 u8 *data, int size) 415 { 416 unsigned int report_id = report->id; 417 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 418 struct uclogic_params *params = &drvdata->params; 419 struct uclogic_params_pen_subreport *subreport; 420 struct uclogic_params_pen_subreport *subreport_list_end; 421 size_t i; 422 423 /* Do not handle anything but input reports */ 424 if (report->type != HID_INPUT_REPORT) 425 return 0; 426 427 while (true) { 428 /* Tweak pen reports, if necessary */ 429 if ((report_id == params->pen.id) && (size >= 2)) { 430 subreport_list_end = 431 params->pen.subreport_list + 432 ARRAY_SIZE(params->pen.subreport_list); 433 /* Try to match a subreport */ 434 for (subreport = params->pen.subreport_list; 435 subreport < subreport_list_end; subreport++) { 436 if (subreport->value != 0 && 437 subreport->value == data[1]) { 438 break; 439 } 440 } 441 /* If a subreport matched */ 442 if (subreport < subreport_list_end) { 443 /* Change to subreport ID, and restart */ 444 report_id = data[0] = subreport->id; 445 continue; 446 } else { 447 return uclogic_raw_event_pen(drvdata, data, size); 448 } 449 } 450 451 /* Tweak frame control reports, if necessary */ 452 for (i = 0; i < ARRAY_SIZE(params->frame_list); i++) { 453 if (report_id == params->frame_list[i].id) { 454 return uclogic_raw_event_frame( 455 drvdata, ¶ms->frame_list[i], 456 data, size); 457 } 458 } 459 460 break; 461 } 462 463 return 0; 464 } 465 466 static void uclogic_remove(struct hid_device *hdev) 467 { 468 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 469 470 del_timer_sync(&drvdata->inrange_timer); 471 hid_hw_stop(hdev); 472 kfree(drvdata->desc_ptr); 473 uclogic_params_cleanup(&drvdata->params); 474 } 475 476 static const struct hid_device_id uclogic_devices[] = { 477 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 478 USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) }, 479 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 480 USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) }, 481 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 482 USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) }, 483 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 484 USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) }, 485 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 486 USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) }, 487 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 488 USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) }, 489 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 490 USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) }, 491 { HID_USB_DEVICE(USB_VENDOR_ID_HUION, 492 USB_DEVICE_ID_HUION_TABLET) }, 493 { HID_USB_DEVICE(USB_VENDOR_ID_HUION, 494 USB_DEVICE_ID_HUION_TABLET2) }, 495 { HID_USB_DEVICE(USB_VENDOR_ID_TRUST, 496 USB_DEVICE_ID_TRUST_PANORA_TABLET) }, 497 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 498 USB_DEVICE_ID_HUION_TABLET) }, 499 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 500 USB_DEVICE_ID_YIYNOVA_TABLET) }, 501 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 502 USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_81) }, 503 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 504 USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_45) }, 505 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 506 USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_47) }, 507 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 508 USB_DEVICE_ID_UCLOGIC_DRAWIMAGE_G3) }, 509 { HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, 510 USB_DEVICE_ID_UGTIZER_TABLET_GP0610) }, 511 { HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, 512 USB_DEVICE_ID_UGTIZER_TABLET_GT5040) }, 513 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 514 USB_DEVICE_ID_UGEE_TABLET_G5) }, 515 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 516 USB_DEVICE_ID_UGEE_TABLET_EX07S) }, 517 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 518 USB_DEVICE_ID_UGEE_TABLET_RAINBOW_CV720) }, 519 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 520 USB_DEVICE_ID_UGEE_XPPEN_TABLET_G540) }, 521 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 522 USB_DEVICE_ID_UGEE_XPPEN_TABLET_G640) }, 523 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 524 USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01) }, 525 { } 526 }; 527 MODULE_DEVICE_TABLE(hid, uclogic_devices); 528 529 static struct hid_driver uclogic_driver = { 530 .name = "uclogic", 531 .id_table = uclogic_devices, 532 .probe = uclogic_probe, 533 .remove = uclogic_remove, 534 .report_fixup = uclogic_report_fixup, 535 .raw_event = uclogic_raw_event, 536 .input_mapping = uclogic_input_mapping, 537 .input_configured = uclogic_input_configured, 538 #ifdef CONFIG_PM 539 .resume = uclogic_resume, 540 .reset_resume = uclogic_resume, 541 #endif 542 }; 543 module_hid_driver(uclogic_driver); 544 545 MODULE_AUTHOR("Martin Rusko"); 546 MODULE_AUTHOR("Nikolai Kondrashov"); 547 MODULE_LICENSE("GPL"); 548