1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * HID driver for UC-Logic devices not fully compliant with HID standard 4 * 5 * Copyright (c) 2010-2014 Nikolai Kondrashov 6 * Copyright (c) 2013 Martin Rusko 7 */ 8 9 /* 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the Free 12 * Software Foundation; either version 2 of the License, or (at your option) 13 * any later version. 14 */ 15 16 #include <linux/device.h> 17 #include <linux/hid.h> 18 #include <linux/module.h> 19 #include <linux/timer.h> 20 #include "usbhid/usbhid.h" 21 #include "hid-uclogic-params.h" 22 23 #include "hid-ids.h" 24 25 /* Driver data */ 26 struct uclogic_drvdata { 27 /* Interface parameters */ 28 struct uclogic_params params; 29 /* Pointer to the replacement report descriptor. NULL if none. */ 30 __u8 *desc_ptr; 31 /* 32 * Size of the replacement report descriptor. 33 * Only valid if desc_ptr is not NULL 34 */ 35 unsigned int desc_size; 36 /* Pen input device */ 37 struct input_dev *pen_input; 38 /* In-range timer */ 39 struct timer_list inrange_timer; 40 /* Last rotary encoder state, or U8_MAX for none */ 41 u8 re_state; 42 }; 43 44 /** 45 * uclogic_inrange_timeout - handle pen in-range state timeout. 46 * Emulate input events normally generated when pen goes out of range for 47 * tablets which don't report that. 48 * 49 * @t: The timer the timeout handler is attached to, stored in a struct 50 * uclogic_drvdata. 51 */ 52 static void uclogic_inrange_timeout(struct timer_list *t) 53 { 54 struct uclogic_drvdata *drvdata = from_timer(drvdata, t, 55 inrange_timer); 56 struct input_dev *input = drvdata->pen_input; 57 58 if (input == NULL) 59 return; 60 input_report_abs(input, ABS_PRESSURE, 0); 61 /* If BTN_TOUCH state is changing */ 62 if (test_bit(BTN_TOUCH, input->key)) { 63 input_event(input, EV_MSC, MSC_SCAN, 64 /* Digitizer Tip Switch usage */ 65 0xd0042); 66 input_report_key(input, BTN_TOUCH, 0); 67 } 68 input_report_key(input, BTN_TOOL_PEN, 0); 69 input_sync(input); 70 } 71 72 static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc, 73 unsigned int *rsize) 74 { 75 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 76 77 if (drvdata->desc_ptr != NULL) { 78 rdesc = drvdata->desc_ptr; 79 *rsize = drvdata->desc_size; 80 } 81 return rdesc; 82 } 83 84 static int uclogic_input_mapping(struct hid_device *hdev, 85 struct hid_input *hi, 86 struct hid_field *field, 87 struct hid_usage *usage, 88 unsigned long **bit, 89 int *max) 90 { 91 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 92 struct uclogic_params *params = &drvdata->params; 93 94 /* Discard invalid pen usages */ 95 if (params->pen.usage_invalid && (field->application == HID_DG_PEN)) 96 return -1; 97 98 /* Let hid-core decide what to do */ 99 return 0; 100 } 101 102 static int uclogic_input_configured(struct hid_device *hdev, 103 struct hid_input *hi) 104 { 105 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 106 struct uclogic_params *params = &drvdata->params; 107 char *name; 108 const char *suffix = NULL; 109 struct hid_field *field; 110 size_t len; 111 size_t i; 112 const struct uclogic_params_frame *frame; 113 114 /* no report associated (HID_QUIRK_MULTI_INPUT not set) */ 115 if (!hi->report) 116 return 0; 117 118 /* 119 * If this is the input corresponding to the pen report 120 * in need of tweaking. 121 */ 122 if (hi->report->id == params->pen.id) { 123 /* Remember the input device so we can simulate events */ 124 drvdata->pen_input = hi->input; 125 } 126 127 /* If it's one of the frame devices */ 128 for (i = 0; i < ARRAY_SIZE(params->frame_list); i++) { 129 frame = ¶ms->frame_list[i]; 130 if (hi->report->id == frame->id) { 131 /* Assign custom suffix, if any */ 132 suffix = frame->suffix; 133 /* 134 * Disable EV_MSC reports for touch ring interfaces to 135 * make the Wacom driver pickup touch ring extents 136 */ 137 if (frame->touch_byte > 0) 138 __clear_bit(EV_MSC, hi->input->evbit); 139 } 140 } 141 142 if (!suffix) { 143 field = hi->report->field[0]; 144 145 switch (field->application) { 146 case HID_GD_KEYBOARD: 147 suffix = "Keyboard"; 148 break; 149 case HID_GD_MOUSE: 150 suffix = "Mouse"; 151 break; 152 case HID_GD_KEYPAD: 153 suffix = "Pad"; 154 break; 155 case HID_DG_PEN: 156 case HID_DG_DIGITIZER: 157 suffix = "Pen"; 158 break; 159 case HID_CP_CONSUMER_CONTROL: 160 suffix = "Consumer Control"; 161 break; 162 case HID_GD_SYSTEM_CONTROL: 163 suffix = "System Control"; 164 break; 165 } 166 } 167 168 if (suffix) { 169 len = strlen(hdev->name) + 2 + strlen(suffix); 170 name = devm_kzalloc(&hi->input->dev, len, GFP_KERNEL); 171 if (name) { 172 snprintf(name, len, "%s %s", hdev->name, suffix); 173 hi->input->name = name; 174 } 175 } 176 177 return 0; 178 } 179 180 static int uclogic_probe(struct hid_device *hdev, 181 const struct hid_device_id *id) 182 { 183 int rc; 184 struct uclogic_drvdata *drvdata = NULL; 185 bool params_initialized = false; 186 187 if (!hid_is_usb(hdev)) 188 return -EINVAL; 189 190 /* 191 * libinput requires the pad interface to be on a different node 192 * than the pen, so use QUIRK_MULTI_INPUT for all tablets. 193 */ 194 hdev->quirks |= HID_QUIRK_MULTI_INPUT; 195 hdev->quirks |= HID_QUIRK_HIDINPUT_FORCE; 196 197 /* Allocate and assign driver data */ 198 drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL); 199 if (drvdata == NULL) { 200 rc = -ENOMEM; 201 goto failure; 202 } 203 timer_setup(&drvdata->inrange_timer, uclogic_inrange_timeout, 0); 204 drvdata->re_state = U8_MAX; 205 hid_set_drvdata(hdev, drvdata); 206 207 /* Initialize the device and retrieve interface parameters */ 208 rc = uclogic_params_init(&drvdata->params, hdev); 209 if (rc != 0) { 210 hid_err(hdev, "failed probing parameters: %d\n", rc); 211 goto failure; 212 } 213 params_initialized = true; 214 hid_dbg(hdev, "parameters:\n"); 215 uclogic_params_hid_dbg(hdev, &drvdata->params); 216 if (drvdata->params.invalid) { 217 hid_info(hdev, "interface is invalid, ignoring\n"); 218 rc = -ENODEV; 219 goto failure; 220 } 221 222 /* Generate replacement report descriptor */ 223 rc = uclogic_params_get_desc(&drvdata->params, 224 &drvdata->desc_ptr, 225 &drvdata->desc_size); 226 if (rc) { 227 hid_err(hdev, 228 "failed generating replacement report descriptor: %d\n", 229 rc); 230 goto failure; 231 } 232 233 rc = hid_parse(hdev); 234 if (rc) { 235 hid_err(hdev, "parse failed\n"); 236 goto failure; 237 } 238 239 rc = hid_hw_start(hdev, HID_CONNECT_DEFAULT); 240 if (rc) { 241 hid_err(hdev, "hw start failed\n"); 242 goto failure; 243 } 244 245 return 0; 246 failure: 247 /* Assume "remove" might not be called if "probe" failed */ 248 if (params_initialized) 249 uclogic_params_cleanup(&drvdata->params); 250 return rc; 251 } 252 253 #ifdef CONFIG_PM 254 static int uclogic_resume(struct hid_device *hdev) 255 { 256 int rc; 257 struct uclogic_params params; 258 259 /* Re-initialize the device, but discard parameters */ 260 rc = uclogic_params_init(¶ms, hdev); 261 if (rc != 0) 262 hid_err(hdev, "failed to re-initialize the device\n"); 263 else 264 uclogic_params_cleanup(¶ms); 265 266 return rc; 267 } 268 #endif 269 270 /** 271 * uclogic_raw_event_pen - handle raw pen events (pen HID reports). 272 * 273 * @drvdata: Driver data. 274 * @data: Report data buffer, can be modified. 275 * @size: Report data size, bytes. 276 * 277 * Returns: 278 * Negative value on error (stops event delivery), zero for success. 279 */ 280 static int uclogic_raw_event_pen(struct uclogic_drvdata *drvdata, 281 u8 *data, int size) 282 { 283 struct uclogic_params_pen *pen = &drvdata->params.pen; 284 285 WARN_ON(drvdata == NULL); 286 WARN_ON(data == NULL && size != 0); 287 288 /* If in-range reports are inverted */ 289 if (pen->inrange == 290 UCLOGIC_PARAMS_PEN_INRANGE_INVERTED) { 291 /* Invert the in-range bit */ 292 data[1] ^= 0x40; 293 } 294 /* 295 * If report contains fragmented high-resolution pen 296 * coordinates 297 */ 298 if (size >= 10 && pen->fragmented_hires) { 299 u8 pressure_low_byte; 300 u8 pressure_high_byte; 301 302 /* Lift pressure bytes */ 303 pressure_low_byte = data[6]; 304 pressure_high_byte = data[7]; 305 /* 306 * Move Y coord to make space for high-order X 307 * coord byte 308 */ 309 data[6] = data[5]; 310 data[5] = data[4]; 311 /* Move high-order X coord byte */ 312 data[4] = data[8]; 313 /* Move high-order Y coord byte */ 314 data[7] = data[9]; 315 /* Place pressure bytes */ 316 data[8] = pressure_low_byte; 317 data[9] = pressure_high_byte; 318 } 319 /* If we need to emulate in-range detection */ 320 if (pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE) { 321 /* Set in-range bit */ 322 data[1] |= 0x40; 323 /* (Re-)start in-range timeout */ 324 mod_timer(&drvdata->inrange_timer, 325 jiffies + msecs_to_jiffies(100)); 326 } 327 /* If we report tilt and Y direction is flipped */ 328 if (size >= 12 && pen->tilt_y_flipped) 329 data[11] = -data[11]; 330 331 return 0; 332 } 333 334 /** 335 * uclogic_raw_event_frame - handle raw frame events (frame HID reports). 336 * 337 * @drvdata: Driver data. 338 * @frame: The parameters of the frame controls to handle. 339 * @data: Report data buffer, can be modified. 340 * @size: Report data size, bytes. 341 * 342 * Returns: 343 * Negative value on error (stops event delivery), zero for success. 344 */ 345 static int uclogic_raw_event_frame( 346 struct uclogic_drvdata *drvdata, 347 const struct uclogic_params_frame *frame, 348 u8 *data, int size) 349 { 350 WARN_ON(drvdata == NULL); 351 WARN_ON(data == NULL && size != 0); 352 353 /* If need to, and can, set pad device ID for Wacom drivers */ 354 if (frame->dev_id_byte > 0 && frame->dev_id_byte < size) { 355 /* If we also have a touch ring and the finger left it */ 356 if (frame->touch_byte > 0 && frame->touch_byte < size && 357 data[frame->touch_byte] == 0) { 358 data[frame->dev_id_byte] = 0; 359 } else { 360 data[frame->dev_id_byte] = 0xf; 361 } 362 } 363 364 /* If need to, and can, read rotary encoder state change */ 365 if (frame->re_lsb > 0 && frame->re_lsb / 8 < size) { 366 unsigned int byte = frame->re_lsb / 8; 367 unsigned int bit = frame->re_lsb % 8; 368 369 u8 change; 370 u8 prev_state = drvdata->re_state; 371 /* Read Gray-coded state */ 372 u8 state = (data[byte] >> bit) & 0x3; 373 /* Encode state change into 2-bit signed integer */ 374 if ((prev_state == 1 && state == 0) || 375 (prev_state == 2 && state == 3)) { 376 change = 1; 377 } else if ((prev_state == 2 && state == 0) || 378 (prev_state == 1 && state == 3)) { 379 change = 3; 380 } else { 381 change = 0; 382 } 383 /* Write change */ 384 data[byte] = (data[byte] & ~((u8)3 << bit)) | 385 (change << bit); 386 /* Remember state */ 387 drvdata->re_state = state; 388 } 389 390 /* If need to, and can, transform the touch ring reports */ 391 if (frame->touch_byte > 0 && frame->touch_byte < size) { 392 __s8 value = data[frame->touch_byte]; 393 394 if (value != 0) { 395 if (frame->touch_flip_at != 0) { 396 value = frame->touch_flip_at - value; 397 if (value <= 0) 398 value = frame->touch_max + value; 399 } 400 data[frame->touch_byte] = value - 1; 401 } 402 } 403 404 /* If need to, and can, transform the bitmap dial reports */ 405 if (frame->bitmap_dial_byte > 0 && frame->bitmap_dial_byte < size) { 406 if (data[frame->bitmap_dial_byte] == 2) 407 data[frame->bitmap_dial_byte] = -1; 408 } 409 410 return 0; 411 } 412 413 static int uclogic_raw_event(struct hid_device *hdev, 414 struct hid_report *report, 415 u8 *data, int size) 416 { 417 unsigned int report_id = report->id; 418 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 419 struct uclogic_params *params = &drvdata->params; 420 struct uclogic_params_pen_subreport *subreport; 421 struct uclogic_params_pen_subreport *subreport_list_end; 422 size_t i; 423 424 /* Do not handle anything but input reports */ 425 if (report->type != HID_INPUT_REPORT) 426 return 0; 427 428 while (true) { 429 /* Tweak pen reports, if necessary */ 430 if ((report_id == params->pen.id) && (size >= 2)) { 431 subreport_list_end = 432 params->pen.subreport_list + 433 ARRAY_SIZE(params->pen.subreport_list); 434 /* Try to match a subreport */ 435 for (subreport = params->pen.subreport_list; 436 subreport < subreport_list_end; subreport++) { 437 if (subreport->value != 0 && 438 subreport->value == data[1]) { 439 break; 440 } 441 } 442 /* If a subreport matched */ 443 if (subreport < subreport_list_end) { 444 /* Change to subreport ID, and restart */ 445 report_id = data[0] = subreport->id; 446 continue; 447 } else { 448 return uclogic_raw_event_pen(drvdata, data, size); 449 } 450 } 451 452 /* Tweak frame control reports, if necessary */ 453 for (i = 0; i < ARRAY_SIZE(params->frame_list); i++) { 454 if (report_id == params->frame_list[i].id) { 455 return uclogic_raw_event_frame( 456 drvdata, ¶ms->frame_list[i], 457 data, size); 458 } 459 } 460 461 break; 462 } 463 464 return 0; 465 } 466 467 static void uclogic_remove(struct hid_device *hdev) 468 { 469 struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev); 470 471 del_timer_sync(&drvdata->inrange_timer); 472 hid_hw_stop(hdev); 473 kfree(drvdata->desc_ptr); 474 uclogic_params_cleanup(&drvdata->params); 475 } 476 477 static const struct hid_device_id uclogic_devices[] = { 478 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 479 USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) }, 480 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 481 USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) }, 482 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 483 USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) }, 484 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 485 USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) }, 486 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 487 USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) }, 488 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 489 USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) }, 490 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 491 USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) }, 492 { HID_USB_DEVICE(USB_VENDOR_ID_HUION, 493 USB_DEVICE_ID_HUION_TABLET) }, 494 { HID_USB_DEVICE(USB_VENDOR_ID_HUION, 495 USB_DEVICE_ID_HUION_TABLET2) }, 496 { HID_USB_DEVICE(USB_VENDOR_ID_TRUST, 497 USB_DEVICE_ID_TRUST_PANORA_TABLET) }, 498 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 499 USB_DEVICE_ID_HUION_TABLET) }, 500 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 501 USB_DEVICE_ID_YIYNOVA_TABLET) }, 502 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 503 USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_81) }, 504 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 505 USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_45) }, 506 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 507 USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_47) }, 508 { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, 509 USB_DEVICE_ID_UCLOGIC_DRAWIMAGE_G3) }, 510 { HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, 511 USB_DEVICE_ID_UGTIZER_TABLET_GP0610) }, 512 { HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, 513 USB_DEVICE_ID_UGTIZER_TABLET_GT5040) }, 514 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 515 USB_DEVICE_ID_UGEE_PARBLO_A610_PRO) }, 516 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 517 USB_DEVICE_ID_UGEE_TABLET_G5) }, 518 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 519 USB_DEVICE_ID_UGEE_TABLET_EX07S) }, 520 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 521 USB_DEVICE_ID_UGEE_TABLET_RAINBOW_CV720) }, 522 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 523 USB_DEVICE_ID_UGEE_XPPEN_TABLET_G540) }, 524 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 525 USB_DEVICE_ID_UGEE_XPPEN_TABLET_G640) }, 526 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 527 USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01) }, 528 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 529 USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01_V2) }, 530 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 531 USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L) }, 532 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 533 USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S) }, 534 { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, 535 USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06) }, 536 { } 537 }; 538 MODULE_DEVICE_TABLE(hid, uclogic_devices); 539 540 static struct hid_driver uclogic_driver = { 541 .name = "uclogic", 542 .id_table = uclogic_devices, 543 .probe = uclogic_probe, 544 .remove = uclogic_remove, 545 .report_fixup = uclogic_report_fixup, 546 .raw_event = uclogic_raw_event, 547 .input_mapping = uclogic_input_mapping, 548 .input_configured = uclogic_input_configured, 549 #ifdef CONFIG_PM 550 .resume = uclogic_resume, 551 .reset_resume = uclogic_resume, 552 #endif 553 }; 554 module_hid_driver(uclogic_driver); 555 556 MODULE_AUTHOR("Martin Rusko"); 557 MODULE_AUTHOR("Nikolai Kondrashov"); 558 MODULE_LICENSE("GPL"); 559