xref: /linux/drivers/hid/hid-dr.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * Force feedback support for DragonRise Inc. game controllers
3  *
4  * From what I have gathered, these devices are mass produced in China and are
5  * distributed under several vendors. They often share the same design as
6  * the original PlayStation DualShock controller.
7  *
8  * 0079:0006 "DragonRise Inc.   Generic   USB  Joystick  "
9  *  - tested with a Tesun USB-703 game controller.
10  *
11  * Copyright (c) 2009 Richard Walmsley <richwalm@gmail.com>
12  */
13 
14 /*
15  * This program is free software; you can redistribute it and/or modify
16  * it under the terms of the GNU General Public License as published by
17  * the Free Software Foundation; either version 2 of the License, or
18  * (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
23  * GNU General Public License for more details.
24  *
25  * You should have received a copy of the GNU General Public License
26  * along with this program; if not, write to the Free Software
27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
28  */
29 
30 #include <linux/input.h>
31 #include <linux/slab.h>
32 #include <linux/hid.h>
33 #include <linux/module.h>
34 
35 #include "hid-ids.h"
36 
37 #ifdef CONFIG_DRAGONRISE_FF
38 
39 struct drff_device {
40 	struct hid_report *report;
41 };
42 
43 static int drff_play(struct input_dev *dev, void *data,
44 				 struct ff_effect *effect)
45 {
46 	struct hid_device *hid = input_get_drvdata(dev);
47 	struct drff_device *drff = data;
48 	int strong, weak;
49 
50 	strong = effect->u.rumble.strong_magnitude;
51 	weak = effect->u.rumble.weak_magnitude;
52 
53 	dbg_hid("called with 0x%04x 0x%04x", strong, weak);
54 
55 	if (strong || weak) {
56 		strong = strong * 0xff / 0xffff;
57 		weak = weak * 0xff / 0xffff;
58 
59 		/* While reverse engineering this device, I found that when
60 		   this value is set, it causes the strong rumble to function
61 		   at a near maximum speed, so we'll bypass it. */
62 		if (weak == 0x0a)
63 			weak = 0x0b;
64 
65 		drff->report->field[0]->value[0] = 0x51;
66 		drff->report->field[0]->value[1] = 0x00;
67 		drff->report->field[0]->value[2] = weak;
68 		drff->report->field[0]->value[4] = strong;
69 		hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
70 
71 		drff->report->field[0]->value[0] = 0xfa;
72 		drff->report->field[0]->value[1] = 0xfe;
73 	} else {
74 		drff->report->field[0]->value[0] = 0xf3;
75 		drff->report->field[0]->value[1] = 0x00;
76 	}
77 
78 	drff->report->field[0]->value[2] = 0x00;
79 	drff->report->field[0]->value[4] = 0x00;
80 	dbg_hid("running with 0x%02x 0x%02x", strong, weak);
81 	hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
82 
83 	return 0;
84 }
85 
86 static int drff_init(struct hid_device *hid)
87 {
88 	struct drff_device *drff;
89 	struct hid_report *report;
90 	struct hid_input *hidinput = list_first_entry(&hid->inputs,
91 						struct hid_input, list);
92 	struct list_head *report_list =
93 			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
94 	struct input_dev *dev = hidinput->input;
95 	int error;
96 
97 	if (list_empty(report_list)) {
98 		hid_err(hid, "no output reports found\n");
99 		return -ENODEV;
100 	}
101 
102 	report = list_first_entry(report_list, struct hid_report, list);
103 	if (report->maxfield < 1) {
104 		hid_err(hid, "no fields in the report\n");
105 		return -ENODEV;
106 	}
107 
108 	if (report->field[0]->report_count < 7) {
109 		hid_err(hid, "not enough values in the field\n");
110 		return -ENODEV;
111 	}
112 
113 	drff = kzalloc(sizeof(struct drff_device), GFP_KERNEL);
114 	if (!drff)
115 		return -ENOMEM;
116 
117 	set_bit(FF_RUMBLE, dev->ffbit);
118 
119 	error = input_ff_create_memless(dev, drff, drff_play);
120 	if (error) {
121 		kfree(drff);
122 		return error;
123 	}
124 
125 	drff->report = report;
126 	drff->report->field[0]->value[0] = 0xf3;
127 	drff->report->field[0]->value[1] = 0x00;
128 	drff->report->field[0]->value[2] = 0x00;
129 	drff->report->field[0]->value[3] = 0x00;
130 	drff->report->field[0]->value[4] = 0x00;
131 	drff->report->field[0]->value[5] = 0x00;
132 	drff->report->field[0]->value[6] = 0x00;
133 	hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
134 
135 	hid_info(hid, "Force Feedback for DragonRise Inc. "
136 		 "game controllers by Richard Walmsley <richwalm@gmail.com>\n");
137 
138 	return 0;
139 }
140 #else
141 static inline int drff_init(struct hid_device *hid)
142 {
143 	return 0;
144 }
145 #endif
146 
147 /*
148  * The original descriptor of joystick with PID 0x0011, represented by DVTech PC
149  * JS19. It seems both copied from another device and a result of confusion
150  * either about the specification or about the program used to create the
151  * descriptor. In any case, it's a wonder it works on Windows.
152  *
153  *  Usage Page (Desktop),             ; Generic desktop controls (01h)
154  *  Usage (Joystik),                  ; Joystik (04h, application collection)
155  *  Collection (Application),
156  *    Collection (Logical),
157  *      Report Size (8),
158  *      Report Count (5),
159  *      Logical Minimum (0),
160  *      Logical Maximum (255),
161  *      Physical Minimum (0),
162  *      Physical Maximum (255),
163  *      Usage (X),                    ; X (30h, dynamic value)
164  *      Usage (X),                    ; X (30h, dynamic value)
165  *      Usage (X),                    ; X (30h, dynamic value)
166  *      Usage (X),                    ; X (30h, dynamic value)
167  *      Usage (Y),                    ; Y (31h, dynamic value)
168  *      Input (Variable),
169  *      Report Size (4),
170  *      Report Count (1),
171  *      Logical Maximum (7),
172  *      Physical Maximum (315),
173  *      Unit (Degrees),
174  *      Usage (00h),
175  *      Input (Variable, Null State),
176  *      Unit,
177  *      Report Size (1),
178  *      Report Count (10),
179  *      Logical Maximum (1),
180  *      Physical Maximum (1),
181  *      Usage Page (Button),          ; Button (09h)
182  *      Usage Minimum (01h),
183  *      Usage Maximum (0Ah),
184  *      Input (Variable),
185  *      Usage Page (FF00h),           ; FF00h, vendor-defined
186  *      Report Size (1),
187  *      Report Count (10),
188  *      Logical Maximum (1),
189  *      Physical Maximum (1),
190  *      Usage (01h),
191  *      Input (Variable),
192  *    End Collection,
193  *    Collection (Logical),
194  *      Report Size (8),
195  *      Report Count (4),
196  *      Physical Maximum (255),
197  *      Logical Maximum (255),
198  *      Usage (02h),
199  *      Output (Variable),
200  *    End Collection,
201  *  End Collection
202  */
203 
204 /* Size of the original descriptor of the PID 0x0011 joystick */
205 #define PID0011_RDESC_ORIG_SIZE	101
206 
207 /* Fixed report descriptor for PID 0x011 joystick */
208 static __u8 pid0011_rdesc_fixed[] = {
209 	0x05, 0x01,         /*  Usage Page (Desktop),           */
210 	0x09, 0x04,         /*  Usage (Joystik),                */
211 	0xA1, 0x01,         /*  Collection (Application),       */
212 	0xA1, 0x02,         /*      Collection (Logical),       */
213 	0x14,               /*          Logical Minimum (0),    */
214 	0x75, 0x08,         /*          Report Size (8),        */
215 	0x95, 0x03,         /*          Report Count (3),       */
216 	0x81, 0x01,         /*          Input (Constant),       */
217 	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
218 	0x95, 0x02,         /*          Report Count (2),       */
219 	0x09, 0x30,         /*          Usage (X),              */
220 	0x09, 0x31,         /*          Usage (Y),              */
221 	0x81, 0x02,         /*          Input (Variable),       */
222 	0x75, 0x01,         /*          Report Size (1),        */
223 	0x95, 0x04,         /*          Report Count (4),       */
224 	0x81, 0x01,         /*          Input (Constant),       */
225 	0x25, 0x01,         /*          Logical Maximum (1),    */
226 	0x95, 0x0A,         /*          Report Count (10),      */
227 	0x05, 0x09,         /*          Usage Page (Button),    */
228 	0x19, 0x01,         /*          Usage Minimum (01h),    */
229 	0x29, 0x0A,         /*          Usage Maximum (0Ah),    */
230 	0x81, 0x02,         /*          Input (Variable),       */
231 	0x95, 0x0A,         /*          Report Count (10),      */
232 	0x81, 0x01,         /*          Input (Constant),       */
233 	0xC0,               /*      End Collection,             */
234 	0xC0                /*  End Collection                  */
235 };
236 
237 static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
238 				unsigned int *rsize)
239 {
240 	switch (hdev->product) {
241 	case 0x0011:
242 		if (*rsize == PID0011_RDESC_ORIG_SIZE) {
243 			rdesc = pid0011_rdesc_fixed;
244 			*rsize = sizeof(pid0011_rdesc_fixed);
245 		}
246 		break;
247 	}
248 	return rdesc;
249 }
250 
251 static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
252 {
253 	int ret;
254 
255 	dev_dbg(&hdev->dev, "DragonRise Inc. HID hardware probe...");
256 
257 	ret = hid_parse(hdev);
258 	if (ret) {
259 		hid_err(hdev, "parse failed\n");
260 		goto err;
261 	}
262 
263 	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
264 	if (ret) {
265 		hid_err(hdev, "hw start failed\n");
266 		goto err;
267 	}
268 
269 	switch (hdev->product) {
270 	case 0x0006:
271 		ret = drff_init(hdev);
272 		if (ret) {
273 			dev_err(&hdev->dev, "force feedback init failed\n");
274 			hid_hw_stop(hdev);
275 			goto err;
276 		}
277 		break;
278 	}
279 
280 	return 0;
281 err:
282 	return ret;
283 }
284 
285 static const struct hid_device_id dr_devices[] = {
286 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006),  },
287 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011),  },
288 	{ }
289 };
290 MODULE_DEVICE_TABLE(hid, dr_devices);
291 
292 static struct hid_driver dr_driver = {
293 	.name = "dragonrise",
294 	.id_table = dr_devices,
295 	.report_fixup = dr_report_fixup,
296 	.probe = dr_probe,
297 };
298 module_hid_driver(dr_driver);
299 
300 MODULE_LICENSE("GPL");
301