1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/ 4 * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> 5 */ 6 7 #include <drm/drm_atomic.h> 8 #include <drm/drm_atomic_helper.h> 9 #include <drm/drm_bridge.h> 10 #include <drm/drm_gem_framebuffer_helper.h> 11 #include <drm/drm_of.h> 12 #include <drm/drm_panel.h> 13 #include <drm/drm_vblank.h> 14 15 #include "tidss_crtc.h" 16 #include "tidss_dispc.h" 17 #include "tidss_drv.h" 18 #include "tidss_encoder.h" 19 #include "tidss_kms.h" 20 #include "tidss_plane.h" 21 22 static void tidss_atomic_commit_tail(struct drm_atomic_state *old_state) 23 { 24 struct drm_device *ddev = old_state->dev; 25 struct tidss_device *tidss = to_tidss(ddev); 26 27 dev_dbg(ddev->dev, "%s\n", __func__); 28 29 tidss_runtime_get(tidss); 30 31 drm_atomic_helper_commit_modeset_disables(ddev, old_state); 32 drm_atomic_helper_commit_planes(ddev, old_state, DRM_PLANE_COMMIT_ACTIVE_ONLY); 33 drm_atomic_helper_commit_modeset_enables(ddev, old_state); 34 35 drm_atomic_helper_commit_hw_done(old_state); 36 drm_atomic_helper_wait_for_flip_done(ddev, old_state); 37 38 drm_atomic_helper_cleanup_planes(ddev, old_state); 39 40 tidss_runtime_put(tidss); 41 } 42 43 static const struct drm_mode_config_helper_funcs mode_config_helper_funcs = { 44 .atomic_commit_tail = tidss_atomic_commit_tail, 45 }; 46 47 static int tidss_atomic_check(struct drm_device *ddev, 48 struct drm_atomic_state *state) 49 { 50 struct drm_plane_state *opstate; 51 struct drm_plane_state *npstate; 52 struct drm_plane *plane; 53 struct drm_crtc_state *cstate; 54 struct drm_crtc *crtc; 55 int ret, i; 56 57 ret = drm_atomic_helper_check(ddev, state); 58 if (ret) 59 return ret; 60 61 /* 62 * Add all active planes on a CRTC to the atomic state, if 63 * x/y/z position or activity of any plane on that CRTC 64 * changes. This is needed for updating the plane positions in 65 * tidss_crtc_position_planes() which is called from 66 * crtc_atomic_enable() and crtc_atomic_flush(). We have an 67 * extra flag to mark x,y-position changes and together 68 * with zpos_changed the condition recognizes all the above 69 * cases. 70 */ 71 for_each_oldnew_plane_in_state(state, plane, opstate, npstate, i) { 72 if (!npstate->crtc || !npstate->visible) 73 continue; 74 75 if (!opstate->crtc || opstate->crtc_x != npstate->crtc_x || 76 opstate->crtc_y != npstate->crtc_y) { 77 cstate = drm_atomic_get_crtc_state(state, 78 npstate->crtc); 79 if (IS_ERR(cstate)) 80 return PTR_ERR(cstate); 81 to_tidss_crtc_state(cstate)->plane_pos_changed = true; 82 } 83 } 84 85 for_each_new_crtc_in_state(state, crtc, cstate, i) { 86 if (to_tidss_crtc_state(cstate)->plane_pos_changed || 87 cstate->zpos_changed) { 88 ret = drm_atomic_add_affected_planes(state, crtc); 89 if (ret) 90 return ret; 91 } 92 } 93 94 return 0; 95 } 96 97 static const struct drm_mode_config_funcs mode_config_funcs = { 98 .fb_create = drm_gem_fb_create, 99 .atomic_check = tidss_atomic_check, 100 .atomic_commit = drm_atomic_helper_commit, 101 }; 102 103 static int tidss_dispc_modeset_init(struct tidss_device *tidss) 104 { 105 struct device *dev = tidss->dev; 106 unsigned int fourccs_len; 107 const u32 *fourccs = dispc_plane_formats(tidss->dispc, &fourccs_len); 108 unsigned int i; 109 110 struct pipe { 111 u32 hw_videoport; 112 struct drm_bridge *bridge; 113 u32 enc_type; 114 }; 115 116 const struct dispc_features *feat = tidss->feat; 117 u32 max_vps = feat->num_vps; 118 u32 max_planes = feat->num_planes; 119 120 struct pipe pipes[TIDSS_MAX_PORTS]; 121 u32 num_pipes = 0; 122 u32 crtc_mask; 123 124 /* first find all the connected panels & bridges */ 125 126 for (i = 0; i < max_vps; i++) { 127 struct drm_panel *panel; 128 struct drm_bridge *bridge; 129 u32 enc_type = DRM_MODE_ENCODER_NONE; 130 int ret; 131 132 ret = drm_of_find_panel_or_bridge(dev->of_node, i, 0, 133 &panel, &bridge); 134 if (ret == -ENODEV) { 135 dev_dbg(dev, "no panel/bridge for port %d\n", i); 136 continue; 137 } else if (ret) { 138 dev_dbg(dev, "port %d probe returned %d\n", i, ret); 139 return ret; 140 } 141 142 if (panel) { 143 u32 conn_type; 144 145 dev_dbg(dev, "Setting up panel for port %d\n", i); 146 147 switch (feat->vp_bus_type[i]) { 148 case DISPC_VP_OLDI: 149 enc_type = DRM_MODE_ENCODER_LVDS; 150 conn_type = DRM_MODE_CONNECTOR_LVDS; 151 break; 152 case DISPC_VP_DPI: 153 enc_type = DRM_MODE_ENCODER_DPI; 154 conn_type = DRM_MODE_CONNECTOR_DPI; 155 break; 156 default: 157 WARN_ON(1); 158 return -EINVAL; 159 } 160 161 if (panel->connector_type != conn_type) { 162 dev_err(dev, 163 "%s: Panel %s has incompatible connector type for vp%d (%d != %d)\n", 164 __func__, dev_name(panel->dev), i, 165 panel->connector_type, conn_type); 166 return -EINVAL; 167 } 168 169 bridge = devm_drm_panel_bridge_add(dev, panel); 170 if (IS_ERR(bridge)) { 171 dev_err(dev, 172 "failed to set up panel bridge for port %d\n", 173 i); 174 return PTR_ERR(bridge); 175 } 176 } 177 178 pipes[num_pipes].hw_videoport = i; 179 pipes[num_pipes].bridge = bridge; 180 pipes[num_pipes].enc_type = enc_type; 181 num_pipes++; 182 } 183 184 /* all planes can be on any crtc */ 185 crtc_mask = (1 << num_pipes) - 1; 186 187 /* then create a plane, a crtc and an encoder for each panel/bridge */ 188 189 for (i = 0; i < num_pipes; ++i) { 190 struct tidss_plane *tplane; 191 struct tidss_crtc *tcrtc; 192 u32 hw_plane_id = feat->vid_order[tidss->num_planes]; 193 int ret; 194 195 tplane = tidss_plane_create(tidss, hw_plane_id, 196 DRM_PLANE_TYPE_PRIMARY, crtc_mask, 197 fourccs, fourccs_len); 198 if (IS_ERR(tplane)) { 199 dev_err(tidss->dev, "plane create failed\n"); 200 return PTR_ERR(tplane); 201 } 202 203 tidss->planes[tidss->num_planes++] = &tplane->plane; 204 205 tcrtc = tidss_crtc_create(tidss, pipes[i].hw_videoport, 206 &tplane->plane); 207 if (IS_ERR(tcrtc)) { 208 dev_err(tidss->dev, "crtc create failed\n"); 209 return PTR_ERR(tcrtc); 210 } 211 212 tidss->crtcs[tidss->num_crtcs++] = &tcrtc->crtc; 213 214 ret = tidss_encoder_create(tidss, pipes[i].bridge, 215 pipes[i].enc_type, 216 1 << tcrtc->crtc.index); 217 if (ret) { 218 dev_err(tidss->dev, "encoder create failed\n"); 219 return ret; 220 } 221 } 222 223 /* create overlay planes of the leftover planes */ 224 225 while (tidss->num_planes < max_planes) { 226 struct tidss_plane *tplane; 227 u32 hw_plane_id = feat->vid_order[tidss->num_planes]; 228 229 tplane = tidss_plane_create(tidss, hw_plane_id, 230 DRM_PLANE_TYPE_OVERLAY, crtc_mask, 231 fourccs, fourccs_len); 232 233 if (IS_ERR(tplane)) { 234 dev_err(tidss->dev, "plane create failed\n"); 235 return PTR_ERR(tplane); 236 } 237 238 tidss->planes[tidss->num_planes++] = &tplane->plane; 239 } 240 241 return 0; 242 } 243 244 int tidss_modeset_init(struct tidss_device *tidss) 245 { 246 struct drm_device *ddev = &tidss->ddev; 247 int ret; 248 249 dev_dbg(tidss->dev, "%s\n", __func__); 250 251 ret = drmm_mode_config_init(ddev); 252 if (ret) 253 return ret; 254 255 ddev->mode_config.min_width = 8; 256 ddev->mode_config.min_height = 8; 257 ddev->mode_config.max_width = 8096; 258 ddev->mode_config.max_height = 8096; 259 ddev->mode_config.normalize_zpos = true; 260 ddev->mode_config.funcs = &mode_config_funcs; 261 ddev->mode_config.helper_private = &mode_config_helper_funcs; 262 263 ret = tidss_dispc_modeset_init(tidss); 264 if (ret) 265 return ret; 266 267 ret = drm_vblank_init(ddev, tidss->num_crtcs); 268 if (ret) 269 return ret; 270 271 drm_mode_config_reset(ddev); 272 273 dev_dbg(tidss->dev, "%s done\n", __func__); 274 275 return 0; 276 } 277