xref: /linux/drivers/gpu/drm/renesas/rcar-du/rcar_lvds.c (revision be239684b18e1cdcafcf8c7face4a2f562c745ad)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * R-Car LVDS Encoder
4  *
5  * Copyright (C) 2013-2018 Renesas Electronics Corporation
6  *
7  * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
8  */
9 
10 #include <linux/clk.h>
11 #include <linux/delay.h>
12 #include <linux/io.h>
13 #include <linux/media-bus-format.h>
14 #include <linux/module.h>
15 #include <linux/of.h>
16 #include <linux/of_device.h>
17 #include <linux/of_graph.h>
18 #include <linux/platform_device.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/reset.h>
21 #include <linux/slab.h>
22 #include <linux/sys_soc.h>
23 
24 #include <drm/drm_atomic.h>
25 #include <drm/drm_atomic_helper.h>
26 #include <drm/drm_bridge.h>
27 #include <drm/drm_of.h>
28 #include <drm/drm_panel.h>
29 #include <drm/drm_print.h>
30 #include <drm/drm_probe_helper.h>
31 
32 #include "rcar_lvds.h"
33 #include "rcar_lvds_regs.h"
34 
35 struct rcar_lvds;
36 
37 /* Keep in sync with the LVDCR0.LVMD hardware register values. */
38 enum rcar_lvds_mode {
39 	RCAR_LVDS_MODE_JEIDA = 0,
40 	RCAR_LVDS_MODE_MIRROR = 1,
41 	RCAR_LVDS_MODE_VESA = 4,
42 };
43 
44 enum rcar_lvds_link_type {
45 	RCAR_LVDS_SINGLE_LINK = 0,
46 	RCAR_LVDS_DUAL_LINK_EVEN_ODD_PIXELS = 1,
47 	RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS = 2,
48 };
49 
50 #define RCAR_LVDS_QUIRK_LANES		BIT(0)	/* LVDS lanes 1 and 3 inverted */
51 #define RCAR_LVDS_QUIRK_GEN3_LVEN	BIT(1)	/* LVEN bit needs to be set on R8A77970/R8A7799x */
52 #define RCAR_LVDS_QUIRK_PWD		BIT(2)	/* PWD bit available (all of Gen3 but E3) */
53 #define RCAR_LVDS_QUIRK_EXT_PLL		BIT(3)	/* Has extended PLL */
54 #define RCAR_LVDS_QUIRK_DUAL_LINK	BIT(4)	/* Supports dual-link operation */
55 
56 struct rcar_lvds_device_info {
57 	unsigned int gen;
58 	unsigned int quirks;
59 	void (*pll_setup)(struct rcar_lvds *lvds, unsigned int freq);
60 };
61 
62 struct rcar_lvds {
63 	struct device *dev;
64 	const struct rcar_lvds_device_info *info;
65 	struct reset_control *rstc;
66 
67 	struct drm_bridge bridge;
68 
69 	struct drm_bridge *next_bridge;
70 	struct drm_panel *panel;
71 
72 	void __iomem *mmio;
73 	struct {
74 		struct clk *mod;		/* CPG module clock */
75 		struct clk *extal;		/* External clock */
76 		struct clk *dotclkin[2];	/* External DU clocks */
77 	} clocks;
78 
79 	struct drm_bridge *companion;
80 	enum rcar_lvds_link_type link_type;
81 };
82 
83 #define bridge_to_rcar_lvds(b) \
84 	container_of(b, struct rcar_lvds, bridge)
85 
86 static u32 rcar_lvds_read(struct rcar_lvds *lvds, u32 reg)
87 {
88 	return ioread32(lvds->mmio + reg);
89 }
90 
91 static void rcar_lvds_write(struct rcar_lvds *lvds, u32 reg, u32 data)
92 {
93 	iowrite32(data, lvds->mmio + reg);
94 }
95 
96 /* -----------------------------------------------------------------------------
97  * PLL Setup
98  */
99 
100 static void rcar_lvds_pll_setup_gen2(struct rcar_lvds *lvds, unsigned int freq)
101 {
102 	u32 val;
103 
104 	if (freq < 39000000)
105 		val = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
106 	else if (freq < 61000000)
107 		val = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
108 	else if (freq < 121000000)
109 		val = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
110 	else
111 		val = LVDPLLCR_PLLDLYCNT_150M;
112 
113 	rcar_lvds_write(lvds, LVDPLLCR, val);
114 }
115 
116 static void rcar_lvds_pll_setup_gen3(struct rcar_lvds *lvds, unsigned int freq)
117 {
118 	u32 val;
119 
120 	if (freq < 42000000)
121 		val = LVDPLLCR_PLLDIVCNT_42M;
122 	else if (freq < 85000000)
123 		val = LVDPLLCR_PLLDIVCNT_85M;
124 	else if (freq < 128000000)
125 		val = LVDPLLCR_PLLDIVCNT_128M;
126 	else
127 		val = LVDPLLCR_PLLDIVCNT_148M;
128 
129 	rcar_lvds_write(lvds, LVDPLLCR, val);
130 }
131 
132 struct pll_info {
133 	unsigned long diff;
134 	unsigned int pll_m;
135 	unsigned int pll_n;
136 	unsigned int pll_e;
137 	unsigned int div;
138 	u32 clksel;
139 };
140 
141 static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk,
142 				     unsigned long target, struct pll_info *pll,
143 				     u32 clksel, bool dot_clock_only)
144 {
145 	unsigned int div7 = dot_clock_only ? 1 : 7;
146 	unsigned long output;
147 	unsigned long fin;
148 	unsigned int m_min;
149 	unsigned int m_max;
150 	unsigned int m;
151 	int error;
152 
153 	if (!clk)
154 		return;
155 
156 	/*
157 	 * The LVDS PLL is made of a pre-divider and a multiplier (strangely
158 	 * enough called M and N respectively), followed by a post-divider E.
159 	 *
160 	 *         ,-----.         ,-----.     ,-----.         ,-----.
161 	 * Fin --> | 1/M | -Fpdf-> | PFD | --> | VCO | -Fvco-> | 1/E | --> Fout
162 	 *         `-----'     ,-> |     |     `-----'   |     `-----'
163 	 *                     |   `-----'               |
164 	 *                     |         ,-----.         |
165 	 *                     `-------- | 1/N | <-------'
166 	 *                               `-----'
167 	 *
168 	 * The clock output by the PLL is then further divided by a programmable
169 	 * divider DIV to achieve the desired target frequency. Finally, an
170 	 * optional fixed /7 divider is used to convert the bit clock to a pixel
171 	 * clock (as LVDS transmits 7 bits per lane per clock sample).
172 	 *
173 	 *          ,-------.     ,-----.     |\
174 	 * Fout --> | 1/DIV | --> | 1/7 | --> | |
175 	 *          `-------'  |  `-----'     | | --> dot clock
176 	 *                     `------------> | |
177 	 *                                    |/
178 	 *
179 	 * The /7 divider is optional, it is enabled when the LVDS PLL is used
180 	 * to drive the LVDS encoder, and disabled when  used to generate a dot
181 	 * clock for the DU RGB output, without using the LVDS encoder.
182 	 *
183 	 * The PLL allowed input frequency range is 12 MHz to 192 MHz.
184 	 */
185 
186 	fin = clk_get_rate(clk);
187 	if (fin < 12000000 || fin > 192000000)
188 		return;
189 
190 	/*
191 	 * The comparison frequency range is 12 MHz to 24 MHz, which limits the
192 	 * allowed values for the pre-divider M (normal range 1-8).
193 	 *
194 	 * Fpfd = Fin / M
195 	 */
196 	m_min = max_t(unsigned int, 1, DIV_ROUND_UP(fin, 24000000));
197 	m_max = min_t(unsigned int, 8, fin / 12000000);
198 
199 	for (m = m_min; m <= m_max; ++m) {
200 		unsigned long fpfd;
201 		unsigned int n_min;
202 		unsigned int n_max;
203 		unsigned int n;
204 
205 		/*
206 		 * The VCO operating range is 900 Mhz to 1800 MHz, which limits
207 		 * the allowed values for the multiplier N (normal range
208 		 * 60-120).
209 		 *
210 		 * Fvco = Fin * N / M
211 		 */
212 		fpfd = fin / m;
213 		n_min = max_t(unsigned int, 60, DIV_ROUND_UP(900000000, fpfd));
214 		n_max = min_t(unsigned int, 120, 1800000000 / fpfd);
215 
216 		for (n = n_min; n < n_max; ++n) {
217 			unsigned long fvco;
218 			unsigned int e_min;
219 			unsigned int e;
220 
221 			/*
222 			 * The output frequency is limited to 1039.5 MHz,
223 			 * limiting again the allowed values for the
224 			 * post-divider E (normal value 1, 2 or 4).
225 			 *
226 			 * Fout = Fvco / E
227 			 */
228 			fvco = fpfd * n;
229 			e_min = fvco > 1039500000 ? 1 : 0;
230 
231 			for (e = e_min; e < 3; ++e) {
232 				unsigned long fout;
233 				unsigned long diff;
234 				unsigned int div;
235 
236 				/*
237 				 * Finally we have a programable divider after
238 				 * the PLL, followed by a an optional fixed /7
239 				 * divider.
240 				 */
241 				fout = fvco / (1 << e) / div7;
242 				div = max(1UL, DIV_ROUND_CLOSEST(fout, target));
243 				diff = abs(fout / div - target);
244 
245 				if (diff < pll->diff) {
246 					pll->diff = diff;
247 					pll->pll_m = m;
248 					pll->pll_n = n;
249 					pll->pll_e = e;
250 					pll->div = div;
251 					pll->clksel = clksel;
252 
253 					if (diff == 0)
254 						goto done;
255 				}
256 			}
257 		}
258 	}
259 
260 done:
261 	output = fin * pll->pll_n / pll->pll_m / (1 << pll->pll_e)
262 	       / div7 / pll->div;
263 	error = (long)(output - target) * 10000 / (long)target;
264 
265 	dev_dbg(lvds->dev,
266 		"%pC %lu Hz -> Fout %lu Hz (target %lu Hz, error %d.%02u%%), PLL M/N/E/DIV %u/%u/%u/%u\n",
267 		clk, fin, output, target, error / 100,
268 		error < 0 ? -error % 100 : error % 100,
269 		pll->pll_m, pll->pll_n, pll->pll_e, pll->div);
270 }
271 
272 static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds,
273 				      unsigned int freq, bool dot_clock_only)
274 {
275 	struct pll_info pll = { .diff = (unsigned long)-1 };
276 	u32 lvdpllcr;
277 
278 	rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[0], freq, &pll,
279 				 LVDPLLCR_CKSEL_DU_DOTCLKIN(0), dot_clock_only);
280 	rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[1], freq, &pll,
281 				 LVDPLLCR_CKSEL_DU_DOTCLKIN(1), dot_clock_only);
282 	rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.extal, freq, &pll,
283 				 LVDPLLCR_CKSEL_EXTAL, dot_clock_only);
284 
285 	lvdpllcr = LVDPLLCR_PLLON | pll.clksel | LVDPLLCR_CLKOUT
286 		 | LVDPLLCR_PLLN(pll.pll_n - 1) | LVDPLLCR_PLLM(pll.pll_m - 1);
287 
288 	if (pll.pll_e > 0)
289 		lvdpllcr |= LVDPLLCR_STP_CLKOUTE | LVDPLLCR_OUTCLKSEL
290 			 |  LVDPLLCR_PLLE(pll.pll_e - 1);
291 
292 	if (dot_clock_only)
293 		lvdpllcr |= LVDPLLCR_OCKSEL;
294 
295 	rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr);
296 
297 	if (pll.div > 1)
298 		/*
299 		 * The DIVRESET bit is a misnomer, setting it to 1 deasserts the
300 		 * divisor reset.
301 		 */
302 		rcar_lvds_write(lvds, LVDDIV, LVDDIV_DIVSEL |
303 				LVDDIV_DIVRESET | LVDDIV_DIV(pll.div - 1));
304 	else
305 		rcar_lvds_write(lvds, LVDDIV, 0);
306 }
307 
308 /* -----------------------------------------------------------------------------
309  * Enable/disable
310  */
311 
312 static enum rcar_lvds_mode rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds,
313 					const struct drm_connector *connector)
314 {
315 	const struct drm_display_info *info;
316 	enum rcar_lvds_mode mode;
317 
318 	/*
319 	 * There is no API yet to retrieve LVDS mode from a bridge, only panels
320 	 * are supported.
321 	 */
322 	if (!lvds->panel)
323 		return RCAR_LVDS_MODE_JEIDA;
324 
325 	info = &connector->display_info;
326 	if (!info->num_bus_formats || !info->bus_formats) {
327 		dev_warn(lvds->dev,
328 			 "no LVDS bus format reported, using JEIDA\n");
329 		return RCAR_LVDS_MODE_JEIDA;
330 	}
331 
332 	switch (info->bus_formats[0]) {
333 	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
334 	case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
335 		mode = RCAR_LVDS_MODE_JEIDA;
336 		break;
337 	case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
338 		mode = RCAR_LVDS_MODE_VESA;
339 		break;
340 	default:
341 		dev_warn(lvds->dev,
342 			 "unsupported LVDS bus format 0x%04x, using JEIDA\n",
343 			 info->bus_formats[0]);
344 		return RCAR_LVDS_MODE_JEIDA;
345 	}
346 
347 	if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
348 		mode |= RCAR_LVDS_MODE_MIRROR;
349 
350 	return mode;
351 }
352 
353 static void rcar_lvds_enable(struct drm_bridge *bridge,
354 			     struct drm_atomic_state *state,
355 			     struct drm_crtc *crtc,
356 			     struct drm_connector *connector)
357 {
358 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
359 	u32 lvdhcr;
360 	u32 lvdcr0;
361 	int ret;
362 
363 	ret = pm_runtime_resume_and_get(lvds->dev);
364 	if (ret)
365 		return;
366 
367 	/* Enable the companion LVDS encoder in dual-link mode. */
368 	if (lvds->link_type != RCAR_LVDS_SINGLE_LINK && lvds->companion)
369 		rcar_lvds_enable(lvds->companion, state, crtc, connector);
370 
371 	/*
372 	 * Hardcode the channels and control signals routing for now.
373 	 *
374 	 * HSYNC -> CTRL0
375 	 * VSYNC -> CTRL1
376 	 * DISP  -> CTRL2
377 	 * 0     -> CTRL3
378 	 */
379 	rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO |
380 			LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC |
381 			LVDCTRCR_CTR0SEL_HSYNC);
382 
383 	if (lvds->info->quirks & RCAR_LVDS_QUIRK_LANES)
384 		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3)
385 		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1);
386 	else
387 		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1)
388 		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3);
389 
390 	rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
391 
392 	if (lvds->info->quirks & RCAR_LVDS_QUIRK_DUAL_LINK) {
393 		u32 lvdstripe = 0;
394 
395 		if (lvds->link_type != RCAR_LVDS_SINGLE_LINK) {
396 			/*
397 			 * By default we generate even pixels from the primary
398 			 * encoder and odd pixels from the companion encoder.
399 			 * Swap pixels around if the sink requires odd pixels
400 			 * from the primary encoder and even pixels from the
401 			 * companion encoder.
402 			 */
403 			bool swap_pixels = lvds->link_type ==
404 				RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS;
405 
406 			/*
407 			 * Configure vertical stripe since we are dealing with
408 			 * an LVDS dual-link connection.
409 			 *
410 			 * ST_SWAP is reserved for the companion encoder, only
411 			 * set it in the primary encoder.
412 			 */
413 			lvdstripe = LVDSTRIPE_ST_ON
414 				  | (lvds->companion && swap_pixels ?
415 				     LVDSTRIPE_ST_SWAP : 0);
416 		}
417 		rcar_lvds_write(lvds, LVDSTRIPE, lvdstripe);
418 	}
419 
420 	/*
421 	 * PLL clock configuration on all instances but the companion in
422 	 * dual-link mode.
423 	 *
424 	 * The extended PLL has been turned on by an explicit call to
425 	 * rcar_lvds_pclk_enable() from the DU driver.
426 	 */
427 	if ((lvds->link_type == RCAR_LVDS_SINGLE_LINK || lvds->companion) &&
428 	    !(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)) {
429 		const struct drm_crtc_state *crtc_state =
430 			drm_atomic_get_new_crtc_state(state, crtc);
431 		const struct drm_display_mode *mode =
432 			&crtc_state->adjusted_mode;
433 
434 		lvds->info->pll_setup(lvds, mode->clock * 1000);
435 	}
436 
437 	/* Set the LVDS mode and select the input. */
438 	lvdcr0 = rcar_lvds_get_lvds_mode(lvds, connector) << LVDCR0_LVMD_SHIFT;
439 
440 	if (lvds->bridge.encoder) {
441 		if (drm_crtc_index(crtc) == 2)
442 			lvdcr0 |= LVDCR0_DUSEL;
443 	}
444 
445 	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
446 
447 	/* Turn all the channels on. */
448 	rcar_lvds_write(lvds, LVDCR1,
449 			LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
450 			LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
451 
452 	if (lvds->info->gen < 3) {
453 		/* Enable LVDS operation and turn the bias circuitry on. */
454 		lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN;
455 		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
456 	}
457 
458 	if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)) {
459 		/*
460 		 * Turn the PLL on (simple PLL only, extended PLL is fully
461 		 * controlled through LVDPLLCR).
462 		 */
463 		lvdcr0 |= LVDCR0_PLLON;
464 		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
465 	}
466 
467 	if (lvds->info->quirks & RCAR_LVDS_QUIRK_PWD) {
468 		/* Set LVDS normal mode. */
469 		lvdcr0 |= LVDCR0_PWD;
470 		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
471 	}
472 
473 	if (lvds->info->quirks & RCAR_LVDS_QUIRK_GEN3_LVEN) {
474 		/*
475 		 * Turn on the LVDS PHY. On D3, the LVEN and LVRES bit must be
476 		 * set at the same time, so don't write the register yet.
477 		 */
478 		lvdcr0 |= LVDCR0_LVEN;
479 		if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_PWD))
480 			rcar_lvds_write(lvds, LVDCR0, lvdcr0);
481 	}
482 
483 	if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)) {
484 		/* Wait for the PLL startup delay (simple PLL only). */
485 		usleep_range(100, 150);
486 	}
487 
488 	/* Turn the output on. */
489 	lvdcr0 |= LVDCR0_LVRES;
490 	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
491 }
492 
493 static void rcar_lvds_disable(struct drm_bridge *bridge)
494 {
495 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
496 	u32 lvdcr0;
497 
498 	/*
499 	 * Clear the LVDCR0 bits in the order specified by the hardware
500 	 * documentation, ending with a write of 0 to the full register to
501 	 * clear all remaining bits.
502 	 */
503 	lvdcr0 = rcar_lvds_read(lvds, LVDCR0);
504 
505 	lvdcr0 &= ~LVDCR0_LVRES;
506 	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
507 
508 	if (lvds->info->quirks & RCAR_LVDS_QUIRK_GEN3_LVEN) {
509 		lvdcr0 &= ~LVDCR0_LVEN;
510 		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
511 	}
512 
513 	if (lvds->info->quirks & RCAR_LVDS_QUIRK_PWD) {
514 		lvdcr0 &= ~LVDCR0_PWD;
515 		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
516 	}
517 
518 	if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)) {
519 		lvdcr0 &= ~LVDCR0_PLLON;
520 		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
521 	}
522 
523 	rcar_lvds_write(lvds, LVDCR0, 0);
524 	rcar_lvds_write(lvds, LVDCR1, 0);
525 
526 	/* The extended PLL is turned off in rcar_lvds_pclk_disable(). */
527 	if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL))
528 		rcar_lvds_write(lvds, LVDPLLCR, 0);
529 
530 	/* Disable the companion LVDS encoder in dual-link mode. */
531 	if (lvds->link_type != RCAR_LVDS_SINGLE_LINK && lvds->companion)
532 		rcar_lvds_disable(lvds->companion);
533 
534 	pm_runtime_put_sync(lvds->dev);
535 }
536 
537 /* -----------------------------------------------------------------------------
538  * Clock - D3/E3 only
539  */
540 
541 int rcar_lvds_pclk_enable(struct drm_bridge *bridge, unsigned long freq,
542 			  bool dot_clk_only)
543 {
544 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
545 	int ret;
546 
547 	if (WARN_ON(!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)))
548 		return -ENODEV;
549 
550 	dev_dbg(lvds->dev, "enabling LVDS PLL, freq=%luHz\n", freq);
551 
552 	ret = pm_runtime_resume_and_get(lvds->dev);
553 	if (ret)
554 		return ret;
555 
556 	rcar_lvds_pll_setup_d3_e3(lvds, freq, dot_clk_only);
557 
558 	return 0;
559 }
560 EXPORT_SYMBOL_GPL(rcar_lvds_pclk_enable);
561 
562 void rcar_lvds_pclk_disable(struct drm_bridge *bridge, bool dot_clk_only)
563 {
564 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
565 
566 	if (WARN_ON(!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)))
567 		return;
568 
569 	dev_dbg(lvds->dev, "disabling LVDS PLL\n");
570 
571 	if (!dot_clk_only)
572 		rcar_lvds_disable(bridge);
573 
574 	rcar_lvds_write(lvds, LVDPLLCR, 0);
575 
576 	pm_runtime_put_sync(lvds->dev);
577 }
578 EXPORT_SYMBOL_GPL(rcar_lvds_pclk_disable);
579 
580 /* -----------------------------------------------------------------------------
581  * Bridge
582  */
583 
584 static void rcar_lvds_atomic_enable(struct drm_bridge *bridge,
585 				    struct drm_bridge_state *old_bridge_state)
586 {
587 	struct drm_atomic_state *state = old_bridge_state->base.state;
588 	struct drm_connector *connector;
589 	struct drm_crtc *crtc;
590 
591 	connector = drm_atomic_get_new_connector_for_encoder(state,
592 							     bridge->encoder);
593 	crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
594 
595 	rcar_lvds_enable(bridge, state, crtc, connector);
596 }
597 
598 static void rcar_lvds_atomic_disable(struct drm_bridge *bridge,
599 				     struct drm_bridge_state *old_bridge_state)
600 {
601 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
602 
603 	/*
604 	 * For D3 and E3, disabling the LVDS encoder before the DU would stall
605 	 * the DU, causing a vblank wait timeout when stopping the DU. This has
606 	 * been traced to clearing the LVEN bit, but the exact reason is
607 	 * unknown. Keep the encoder enabled, it will be disabled by an explicit
608 	 * call to rcar_lvds_pclk_disable() from the DU driver.
609 	 *
610 	 * We could clear the LVRES bit already to disable the LVDS output, but
611 	 * that's likely pointless.
612 	 */
613 	if (lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)
614 		return;
615 
616 	rcar_lvds_disable(bridge);
617 }
618 
619 static bool rcar_lvds_mode_fixup(struct drm_bridge *bridge,
620 				 const struct drm_display_mode *mode,
621 				 struct drm_display_mode *adjusted_mode)
622 {
623 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
624 	int min_freq;
625 
626 	/*
627 	 * The internal LVDS encoder has a restricted clock frequency operating
628 	 * range, from 5MHz to 148.5MHz on D3 and E3, and from 31MHz to
629 	 * 148.5MHz on all other platforms. Clamp the clock accordingly.
630 	 */
631 	min_freq = lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL ? 5000 : 31000;
632 	adjusted_mode->clock = clamp(adjusted_mode->clock, min_freq, 148500);
633 
634 	return true;
635 }
636 
637 static int rcar_lvds_attach(struct drm_bridge *bridge,
638 			    enum drm_bridge_attach_flags flags)
639 {
640 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
641 
642 	if (!lvds->next_bridge)
643 		return 0;
644 
645 	return drm_bridge_attach(bridge->encoder, lvds->next_bridge, bridge,
646 				 flags);
647 }
648 
649 static const struct drm_bridge_funcs rcar_lvds_bridge_ops = {
650 	.attach = rcar_lvds_attach,
651 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
652 	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
653 	.atomic_reset = drm_atomic_helper_bridge_reset,
654 	.atomic_enable = rcar_lvds_atomic_enable,
655 	.atomic_disable = rcar_lvds_atomic_disable,
656 	.mode_fixup = rcar_lvds_mode_fixup,
657 };
658 
659 bool rcar_lvds_dual_link(struct drm_bridge *bridge)
660 {
661 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
662 
663 	return lvds->link_type != RCAR_LVDS_SINGLE_LINK;
664 }
665 EXPORT_SYMBOL_GPL(rcar_lvds_dual_link);
666 
667 bool rcar_lvds_is_connected(struct drm_bridge *bridge)
668 {
669 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
670 
671 	return lvds->next_bridge != NULL;
672 }
673 EXPORT_SYMBOL_GPL(rcar_lvds_is_connected);
674 
675 /* -----------------------------------------------------------------------------
676  * Probe & Remove
677  */
678 
679 static int rcar_lvds_parse_dt_companion(struct rcar_lvds *lvds)
680 {
681 	const struct of_device_id *match;
682 	struct device_node *companion;
683 	struct device_node *port0, *port1;
684 	struct rcar_lvds *companion_lvds;
685 	struct device *dev = lvds->dev;
686 	int dual_link;
687 	int ret = 0;
688 
689 	/* Locate the companion LVDS encoder for dual-link operation, if any. */
690 	companion = of_parse_phandle(dev->of_node, "renesas,companion", 0);
691 	if (!companion)
692 		return 0;
693 
694 	/*
695 	 * Sanity check: the companion encoder must have the same compatible
696 	 * string.
697 	 */
698 	match = of_match_device(dev->driver->of_match_table, dev);
699 	if (!of_device_is_compatible(companion, match->compatible)) {
700 		dev_err(dev, "Companion LVDS encoder is invalid\n");
701 		ret = -ENXIO;
702 		goto done;
703 	}
704 
705 	/*
706 	 * We need to work out if the sink is expecting us to function in
707 	 * dual-link mode. We do this by looking at the DT port nodes we are
708 	 * connected to, if they are marked as expecting even pixels and
709 	 * odd pixels than we need to enable vertical stripe output.
710 	 */
711 	port0 = of_graph_get_port_by_id(dev->of_node, 1);
712 	port1 = of_graph_get_port_by_id(companion, 1);
713 	dual_link = drm_of_lvds_get_dual_link_pixel_order(port0, port1);
714 	of_node_put(port0);
715 	of_node_put(port1);
716 
717 	switch (dual_link) {
718 	case DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS:
719 		lvds->link_type = RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS;
720 		break;
721 	case DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS:
722 		lvds->link_type = RCAR_LVDS_DUAL_LINK_EVEN_ODD_PIXELS;
723 		break;
724 	default:
725 		/*
726 		 * Early dual-link bridge specific implementations populate the
727 		 * timings field of drm_bridge. If the flag is set, we assume
728 		 * that we are expected to generate even pixels from the primary
729 		 * encoder, and odd pixels from the companion encoder.
730 		 */
731 		if (lvds->next_bridge->timings &&
732 		    lvds->next_bridge->timings->dual_link)
733 			lvds->link_type = RCAR_LVDS_DUAL_LINK_EVEN_ODD_PIXELS;
734 		else
735 			lvds->link_type = RCAR_LVDS_SINGLE_LINK;
736 	}
737 
738 	if (lvds->link_type == RCAR_LVDS_SINGLE_LINK) {
739 		dev_dbg(dev, "Single-link configuration detected\n");
740 		goto done;
741 	}
742 
743 	lvds->companion = of_drm_find_bridge(companion);
744 	if (!lvds->companion) {
745 		ret = -EPROBE_DEFER;
746 		goto done;
747 	}
748 
749 	dev_dbg(dev,
750 		"Dual-link configuration detected (companion encoder %pOF)\n",
751 		companion);
752 
753 	if (lvds->link_type == RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS)
754 		dev_dbg(dev, "Data swapping required\n");
755 
756 	/*
757 	 * FIXME: We should not be messing with the companion encoder private
758 	 * data from the primary encoder, we should rather let the companion
759 	 * encoder work things out on its own. However, the companion encoder
760 	 * doesn't hold a reference to the primary encoder, and
761 	 * drm_of_lvds_get_dual_link_pixel_order needs to be given references
762 	 * to the output ports of both encoders, therefore leave it like this
763 	 * for the time being.
764 	 */
765 	companion_lvds = bridge_to_rcar_lvds(lvds->companion);
766 	companion_lvds->link_type = lvds->link_type;
767 
768 done:
769 	of_node_put(companion);
770 
771 	return ret;
772 }
773 
774 static int rcar_lvds_parse_dt(struct rcar_lvds *lvds)
775 {
776 	int ret;
777 
778 	ret = drm_of_find_panel_or_bridge(lvds->dev->of_node, 1, 0,
779 					  &lvds->panel, &lvds->next_bridge);
780 	if (ret)
781 		goto done;
782 
783 	if (lvds->panel) {
784 		lvds->next_bridge = devm_drm_panel_bridge_add(lvds->dev,
785 							      lvds->panel);
786 		if (IS_ERR_OR_NULL(lvds->next_bridge)) {
787 			ret = -EINVAL;
788 			goto done;
789 		}
790 	}
791 
792 	if (lvds->info->quirks & RCAR_LVDS_QUIRK_DUAL_LINK)
793 		ret = rcar_lvds_parse_dt_companion(lvds);
794 
795 done:
796 	/*
797 	 * On D3/E3 the LVDS encoder provides a clock to the DU, which can be
798 	 * used for the DPAD output even when the LVDS output is not connected.
799 	 * Don't fail probe in that case as the DU will need the bridge to
800 	 * control the clock.
801 	 */
802 	if (lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)
803 		return ret == -ENODEV ? 0 : ret;
804 
805 	return ret;
806 }
807 
808 static struct clk *rcar_lvds_get_clock(struct rcar_lvds *lvds, const char *name,
809 				       bool optional)
810 {
811 	struct clk *clk;
812 
813 	clk = devm_clk_get(lvds->dev, name);
814 	if (!IS_ERR(clk))
815 		return clk;
816 
817 	if (PTR_ERR(clk) == -ENOENT && optional)
818 		return NULL;
819 
820 	dev_err_probe(lvds->dev, PTR_ERR(clk), "failed to get %s clock\n",
821 		      name ? name : "module");
822 
823 	return clk;
824 }
825 
826 static int rcar_lvds_get_clocks(struct rcar_lvds *lvds)
827 {
828 	lvds->clocks.mod = rcar_lvds_get_clock(lvds, NULL, false);
829 	if (IS_ERR(lvds->clocks.mod))
830 		return PTR_ERR(lvds->clocks.mod);
831 
832 	/*
833 	 * LVDS encoders without an extended PLL have no external clock inputs.
834 	 */
835 	if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL))
836 		return 0;
837 
838 	lvds->clocks.extal = rcar_lvds_get_clock(lvds, "extal", true);
839 	if (IS_ERR(lvds->clocks.extal))
840 		return PTR_ERR(lvds->clocks.extal);
841 
842 	lvds->clocks.dotclkin[0] = rcar_lvds_get_clock(lvds, "dclkin.0", true);
843 	if (IS_ERR(lvds->clocks.dotclkin[0]))
844 		return PTR_ERR(lvds->clocks.dotclkin[0]);
845 
846 	lvds->clocks.dotclkin[1] = rcar_lvds_get_clock(lvds, "dclkin.1", true);
847 	if (IS_ERR(lvds->clocks.dotclkin[1]))
848 		return PTR_ERR(lvds->clocks.dotclkin[1]);
849 
850 	/* At least one input to the PLL must be available. */
851 	if (!lvds->clocks.extal && !lvds->clocks.dotclkin[0] &&
852 	    !lvds->clocks.dotclkin[1]) {
853 		dev_err(lvds->dev,
854 			"no input clock (extal, dclkin.0 or dclkin.1)\n");
855 		return -EINVAL;
856 	}
857 
858 	return 0;
859 }
860 
861 static const struct rcar_lvds_device_info rcar_lvds_r8a7790es1_info = {
862 	.gen = 2,
863 	.quirks = RCAR_LVDS_QUIRK_LANES,
864 	.pll_setup = rcar_lvds_pll_setup_gen2,
865 };
866 
867 static const struct soc_device_attribute lvds_quirk_matches[] = {
868 	{
869 		.soc_id = "r8a7790", .revision = "ES1.*",
870 		.data = &rcar_lvds_r8a7790es1_info,
871 	},
872 	{ /* sentinel */ }
873 };
874 
875 static int rcar_lvds_probe(struct platform_device *pdev)
876 {
877 	const struct soc_device_attribute *attr;
878 	struct rcar_lvds *lvds;
879 	int ret;
880 
881 	lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
882 	if (lvds == NULL)
883 		return -ENOMEM;
884 
885 	platform_set_drvdata(pdev, lvds);
886 
887 	lvds->dev = &pdev->dev;
888 	lvds->info = of_device_get_match_data(&pdev->dev);
889 
890 	attr = soc_device_match(lvds_quirk_matches);
891 	if (attr)
892 		lvds->info = attr->data;
893 
894 	ret = rcar_lvds_parse_dt(lvds);
895 	if (ret < 0)
896 		return ret;
897 
898 	lvds->bridge.funcs = &rcar_lvds_bridge_ops;
899 	lvds->bridge.of_node = pdev->dev.of_node;
900 
901 	lvds->mmio = devm_platform_ioremap_resource(pdev, 0);
902 	if (IS_ERR(lvds->mmio))
903 		return PTR_ERR(lvds->mmio);
904 
905 	ret = rcar_lvds_get_clocks(lvds);
906 	if (ret < 0)
907 		return ret;
908 
909 	lvds->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
910 	if (IS_ERR(lvds->rstc))
911 		return dev_err_probe(&pdev->dev, PTR_ERR(lvds->rstc),
912 				     "failed to get cpg reset\n");
913 
914 	pm_runtime_enable(&pdev->dev);
915 
916 	drm_bridge_add(&lvds->bridge);
917 
918 	return 0;
919 }
920 
921 static void rcar_lvds_remove(struct platform_device *pdev)
922 {
923 	struct rcar_lvds *lvds = platform_get_drvdata(pdev);
924 
925 	drm_bridge_remove(&lvds->bridge);
926 
927 	pm_runtime_disable(&pdev->dev);
928 }
929 
930 static const struct rcar_lvds_device_info rcar_lvds_gen2_info = {
931 	.gen = 2,
932 	.pll_setup = rcar_lvds_pll_setup_gen2,
933 };
934 
935 static const struct rcar_lvds_device_info rcar_lvds_gen3_info = {
936 	.gen = 3,
937 	.quirks = RCAR_LVDS_QUIRK_PWD,
938 	.pll_setup = rcar_lvds_pll_setup_gen3,
939 };
940 
941 static const struct rcar_lvds_device_info rcar_lvds_r8a77970_info = {
942 	.gen = 3,
943 	.quirks = RCAR_LVDS_QUIRK_PWD | RCAR_LVDS_QUIRK_GEN3_LVEN,
944 	.pll_setup = rcar_lvds_pll_setup_gen2,
945 };
946 
947 static const struct rcar_lvds_device_info rcar_lvds_r8a77990_info = {
948 	.gen = 3,
949 	.quirks = RCAR_LVDS_QUIRK_GEN3_LVEN | RCAR_LVDS_QUIRK_EXT_PLL
950 		| RCAR_LVDS_QUIRK_DUAL_LINK,
951 };
952 
953 static const struct rcar_lvds_device_info rcar_lvds_r8a77995_info = {
954 	.gen = 3,
955 	.quirks = RCAR_LVDS_QUIRK_GEN3_LVEN | RCAR_LVDS_QUIRK_PWD
956 		| RCAR_LVDS_QUIRK_EXT_PLL | RCAR_LVDS_QUIRK_DUAL_LINK,
957 };
958 
959 static const struct of_device_id rcar_lvds_of_table[] = {
960 	{ .compatible = "renesas,r8a7742-lvds", .data = &rcar_lvds_gen2_info },
961 	{ .compatible = "renesas,r8a7743-lvds", .data = &rcar_lvds_gen2_info },
962 	{ .compatible = "renesas,r8a7744-lvds", .data = &rcar_lvds_gen2_info },
963 	{ .compatible = "renesas,r8a774a1-lvds", .data = &rcar_lvds_gen3_info },
964 	{ .compatible = "renesas,r8a774b1-lvds", .data = &rcar_lvds_gen3_info },
965 	{ .compatible = "renesas,r8a774c0-lvds", .data = &rcar_lvds_r8a77990_info },
966 	{ .compatible = "renesas,r8a774e1-lvds", .data = &rcar_lvds_gen3_info },
967 	{ .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_gen2_info },
968 	{ .compatible = "renesas,r8a7791-lvds", .data = &rcar_lvds_gen2_info },
969 	{ .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info },
970 	{ .compatible = "renesas,r8a7795-lvds", .data = &rcar_lvds_gen3_info },
971 	{ .compatible = "renesas,r8a7796-lvds", .data = &rcar_lvds_gen3_info },
972 	{ .compatible = "renesas,r8a77961-lvds", .data = &rcar_lvds_gen3_info },
973 	{ .compatible = "renesas,r8a77965-lvds", .data = &rcar_lvds_gen3_info },
974 	{ .compatible = "renesas,r8a77970-lvds", .data = &rcar_lvds_r8a77970_info },
975 	{ .compatible = "renesas,r8a77980-lvds", .data = &rcar_lvds_gen3_info },
976 	{ .compatible = "renesas,r8a77990-lvds", .data = &rcar_lvds_r8a77990_info },
977 	{ .compatible = "renesas,r8a77995-lvds", .data = &rcar_lvds_r8a77995_info },
978 	{ }
979 };
980 
981 MODULE_DEVICE_TABLE(of, rcar_lvds_of_table);
982 
983 static int rcar_lvds_runtime_suspend(struct device *dev)
984 {
985 	struct rcar_lvds *lvds = dev_get_drvdata(dev);
986 
987 	clk_disable_unprepare(lvds->clocks.mod);
988 
989 	reset_control_assert(lvds->rstc);
990 
991 	return 0;
992 }
993 
994 static int rcar_lvds_runtime_resume(struct device *dev)
995 {
996 	struct rcar_lvds *lvds = dev_get_drvdata(dev);
997 	int ret;
998 
999 	ret = reset_control_deassert(lvds->rstc);
1000 	if (ret)
1001 		return ret;
1002 
1003 	ret = clk_prepare_enable(lvds->clocks.mod);
1004 	if (ret < 0)
1005 		goto err_reset_assert;
1006 
1007 	return 0;
1008 
1009 err_reset_assert:
1010 	reset_control_assert(lvds->rstc);
1011 
1012 	return ret;
1013 }
1014 
1015 static const struct dev_pm_ops rcar_lvds_pm_ops = {
1016 	SET_RUNTIME_PM_OPS(rcar_lvds_runtime_suspend, rcar_lvds_runtime_resume, NULL)
1017 };
1018 
1019 static struct platform_driver rcar_lvds_platform_driver = {
1020 	.probe		= rcar_lvds_probe,
1021 	.remove_new	= rcar_lvds_remove,
1022 	.driver		= {
1023 		.name	= "rcar-lvds",
1024 		.pm	= &rcar_lvds_pm_ops,
1025 		.of_match_table = rcar_lvds_of_table,
1026 	},
1027 };
1028 
1029 module_platform_driver(rcar_lvds_platform_driver);
1030 
1031 MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
1032 MODULE_DESCRIPTION("Renesas R-Car LVDS Encoder Driver");
1033 MODULE_LICENSE("GPL");
1034