xref: /linux/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c (revision d53b8e36925256097a08d7cb749198d85cbf9b2b)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2017 NXP Semiconductors.
4  * Author: Marco Franchi <marco.franchi@nxp.com>
5  *
6  * Based on Panel Simple driver by Thierry Reding <treding@nvidia.com>
7  */
8 
9 #include <linux/delay.h>
10 #include <linux/gpio/consumer.h>
11 #include <linux/media-bus-format.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/platform_device.h>
15 #include <linux/regulator/consumer.h>
16 
17 #include <video/display_timing.h>
18 #include <video/videomode.h>
19 
20 #include <drm/drm_crtc.h>
21 #include <drm/drm_device.h>
22 #include <drm/drm_panel.h>
23 
24 struct seiko_panel_desc {
25 	const struct drm_display_mode *modes;
26 	unsigned int num_modes;
27 	const struct display_timing *timings;
28 	unsigned int num_timings;
29 
30 	unsigned int bpc;
31 
32 	/**
33 	 * @width: width (in millimeters) of the panel's active display area
34 	 * @height: height (in millimeters) of the panel's active display area
35 	 */
36 	struct {
37 		unsigned int width;
38 		unsigned int height;
39 	} size;
40 
41 	u32 bus_format;
42 	u32 bus_flags;
43 };
44 
45 struct seiko_panel {
46 	struct drm_panel base;
47 	const struct seiko_panel_desc *desc;
48 	struct regulator *dvdd;
49 	struct regulator *avdd;
50 	struct gpio_desc *enable_gpio;
51 };
52 
53 static inline struct seiko_panel *to_seiko_panel(struct drm_panel *panel)
54 {
55 	return container_of(panel, struct seiko_panel, base);
56 }
57 
58 static int seiko_panel_get_fixed_modes(struct seiko_panel *panel,
59 				       struct drm_connector *connector)
60 {
61 	struct drm_display_mode *mode;
62 	unsigned int i, num = 0;
63 
64 	if (!panel->desc)
65 		return 0;
66 
67 	for (i = 0; i < panel->desc->num_timings; i++) {
68 		const struct display_timing *dt = &panel->desc->timings[i];
69 		struct videomode vm;
70 
71 		videomode_from_timing(dt, &vm);
72 		mode = drm_mode_create(connector->dev);
73 		if (!mode) {
74 			dev_err(panel->base.dev, "failed to add mode %ux%u\n",
75 				dt->hactive.typ, dt->vactive.typ);
76 			continue;
77 		}
78 
79 		drm_display_mode_from_videomode(&vm, mode);
80 
81 		mode->type |= DRM_MODE_TYPE_DRIVER;
82 
83 		if (panel->desc->num_timings == 1)
84 			mode->type |= DRM_MODE_TYPE_PREFERRED;
85 
86 		drm_mode_probed_add(connector, mode);
87 		num++;
88 	}
89 
90 	for (i = 0; i < panel->desc->num_modes; i++) {
91 		const struct drm_display_mode *m = &panel->desc->modes[i];
92 
93 		mode = drm_mode_duplicate(connector->dev, m);
94 		if (!mode) {
95 			dev_err(panel->base.dev, "failed to add mode %ux%u@%u\n",
96 				m->hdisplay, m->vdisplay,
97 				drm_mode_vrefresh(m));
98 			continue;
99 		}
100 
101 		mode->type |= DRM_MODE_TYPE_DRIVER;
102 
103 		if (panel->desc->num_modes == 1)
104 			mode->type |= DRM_MODE_TYPE_PREFERRED;
105 
106 		drm_mode_set_name(mode);
107 
108 		drm_mode_probed_add(connector, mode);
109 		num++;
110 	}
111 
112 	connector->display_info.bpc = panel->desc->bpc;
113 	connector->display_info.width_mm = panel->desc->size.width;
114 	connector->display_info.height_mm = panel->desc->size.height;
115 	if (panel->desc->bus_format)
116 		drm_display_info_set_bus_formats(&connector->display_info,
117 						 &panel->desc->bus_format, 1);
118 	connector->display_info.bus_flags = panel->desc->bus_flags;
119 
120 	return num;
121 }
122 
123 static int seiko_panel_unprepare(struct drm_panel *panel)
124 {
125 	struct seiko_panel *p = to_seiko_panel(panel);
126 
127 	gpiod_set_value_cansleep(p->enable_gpio, 0);
128 
129 	regulator_disable(p->avdd);
130 
131 	/* Add a 100ms delay as per the panel datasheet */
132 	msleep(100);
133 
134 	regulator_disable(p->dvdd);
135 
136 	return 0;
137 }
138 
139 static int seiko_panel_prepare(struct drm_panel *panel)
140 {
141 	struct seiko_panel *p = to_seiko_panel(panel);
142 	int err;
143 
144 	err = regulator_enable(p->dvdd);
145 	if (err < 0) {
146 		dev_err(panel->dev, "failed to enable dvdd: %d\n", err);
147 		return err;
148 	}
149 
150 	/* Add a 100ms delay as per the panel datasheet */
151 	msleep(100);
152 
153 	err = regulator_enable(p->avdd);
154 	if (err < 0) {
155 		dev_err(panel->dev, "failed to enable avdd: %d\n", err);
156 		goto disable_dvdd;
157 	}
158 
159 	gpiod_set_value_cansleep(p->enable_gpio, 1);
160 
161 	return 0;
162 
163 disable_dvdd:
164 	regulator_disable(p->dvdd);
165 	return err;
166 }
167 
168 static int seiko_panel_get_modes(struct drm_panel *panel,
169 				 struct drm_connector *connector)
170 {
171 	struct seiko_panel *p = to_seiko_panel(panel);
172 
173 	/* add hard-coded panel modes */
174 	return seiko_panel_get_fixed_modes(p, connector);
175 }
176 
177 static int seiko_panel_get_timings(struct drm_panel *panel,
178 				    unsigned int num_timings,
179 				    struct display_timing *timings)
180 {
181 	struct seiko_panel *p = to_seiko_panel(panel);
182 	unsigned int i;
183 
184 	if (p->desc->num_timings < num_timings)
185 		num_timings = p->desc->num_timings;
186 
187 	if (timings)
188 		for (i = 0; i < num_timings; i++)
189 			timings[i] = p->desc->timings[i];
190 
191 	return p->desc->num_timings;
192 }
193 
194 static const struct drm_panel_funcs seiko_panel_funcs = {
195 	.unprepare = seiko_panel_unprepare,
196 	.prepare = seiko_panel_prepare,
197 	.get_modes = seiko_panel_get_modes,
198 	.get_timings = seiko_panel_get_timings,
199 };
200 
201 static int seiko_panel_probe(struct device *dev,
202 					const struct seiko_panel_desc *desc)
203 {
204 	struct seiko_panel *panel;
205 	int err;
206 
207 	panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
208 	if (!panel)
209 		return -ENOMEM;
210 
211 	panel->desc = desc;
212 
213 	panel->dvdd = devm_regulator_get(dev, "dvdd");
214 	if (IS_ERR(panel->dvdd))
215 		return PTR_ERR(panel->dvdd);
216 
217 	panel->avdd = devm_regulator_get(dev, "avdd");
218 	if (IS_ERR(panel->avdd))
219 		return PTR_ERR(panel->avdd);
220 
221 	panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
222 						     GPIOD_OUT_LOW);
223 	if (IS_ERR(panel->enable_gpio))
224 		return dev_err_probe(dev, PTR_ERR(panel->enable_gpio),
225 				     "failed to request GPIO\n");
226 
227 	drm_panel_init(&panel->base, dev, &seiko_panel_funcs,
228 		       DRM_MODE_CONNECTOR_DPI);
229 
230 	err = drm_panel_of_backlight(&panel->base);
231 	if (err)
232 		return err;
233 
234 	drm_panel_add(&panel->base);
235 
236 	dev_set_drvdata(dev, panel);
237 
238 	return 0;
239 }
240 
241 static void seiko_panel_remove(struct platform_device *pdev)
242 {
243 	struct seiko_panel *panel = platform_get_drvdata(pdev);
244 
245 	drm_panel_remove(&panel->base);
246 }
247 
248 static const struct display_timing seiko_43wvf1g_timing = {
249 	.pixelclock = { 33500000, 33500000, 33500000 },
250 	.hactive = { 800, 800, 800 },
251 	.hfront_porch = {  164, 164, 164 },
252 	.hback_porch = { 89, 89, 89 },
253 	.hsync_len = { 10, 10, 10 },
254 	.vactive = { 480, 480, 480 },
255 	.vfront_porch = { 10, 10, 10 },
256 	.vback_porch = { 23, 23, 23 },
257 	.vsync_len = { 10, 10, 10 },
258 	.flags = DISPLAY_FLAGS_DE_LOW,
259 };
260 
261 static const struct seiko_panel_desc seiko_43wvf1g = {
262 	.timings = &seiko_43wvf1g_timing,
263 	.num_timings = 1,
264 	.bpc = 8,
265 	.size = {
266 		.width = 93,
267 		.height = 57,
268 	},
269 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
270 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
271 };
272 
273 static const struct of_device_id platform_of_match[] = {
274 	{
275 		.compatible = "sii,43wvf1g",
276 		.data = &seiko_43wvf1g,
277 	}, {
278 		/* sentinel */
279 	}
280 };
281 MODULE_DEVICE_TABLE(of, platform_of_match);
282 
283 static int seiko_panel_platform_probe(struct platform_device *pdev)
284 {
285 	const struct of_device_id *id;
286 
287 	id = of_match_node(platform_of_match, pdev->dev.of_node);
288 	if (!id)
289 		return -ENODEV;
290 
291 	return seiko_panel_probe(&pdev->dev, id->data);
292 }
293 
294 static struct platform_driver seiko_panel_platform_driver = {
295 	.driver = {
296 		.name = "seiko_panel",
297 		.of_match_table = platform_of_match,
298 	},
299 	.probe = seiko_panel_platform_probe,
300 	.remove_new = seiko_panel_remove,
301 };
302 module_platform_driver(seiko_panel_platform_driver);
303 
304 MODULE_AUTHOR("Marco Franchi <marco.franchi@nxp.com>");
305 MODULE_DESCRIPTION("Seiko 43WVF1G panel driver");
306 MODULE_LICENSE("GPL v2");
307