1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * LCD-OLinuXino support for panel driver 4 * 5 * Copyright (C) 2018 Olimex Ltd. 6 * Author: Stefan Mavrodiev <stefan@olimex.com> 7 */ 8 9 #include <linux/crc32.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/i2c.h> 12 #include <linux/module.h> 13 #include <linux/mutex.h> 14 #include <linux/of.h> 15 #include <linux/regulator/consumer.h> 16 17 #include <video/videomode.h> 18 #include <video/display_timing.h> 19 20 #include <drm/drm_device.h> 21 #include <drm/drm_modes.h> 22 #include <drm/drm_panel.h> 23 24 #define LCD_OLINUXINO_HEADER_MAGIC 0x4F4CB727 25 #define LCD_OLINUXINO_DATA_LEN 256 26 27 struct lcd_olinuxino_mode { 28 u32 pixelclock; 29 u32 hactive; 30 u32 hfp; 31 u32 hbp; 32 u32 hpw; 33 u32 vactive; 34 u32 vfp; 35 u32 vbp; 36 u32 vpw; 37 u32 refresh; 38 u32 flags; 39 }; 40 41 struct lcd_olinuxino_info { 42 char name[32]; 43 u32 width_mm; 44 u32 height_mm; 45 u32 bpc; 46 u32 bus_format; 47 u32 bus_flag; 48 } __attribute__((__packed__)); 49 50 struct lcd_olinuxino_eeprom { 51 u32 header; 52 u32 id; 53 char revision[4]; 54 u32 serial; 55 struct lcd_olinuxino_info info; 56 u32 num_modes; 57 u8 reserved[180]; 58 u32 checksum; 59 } __attribute__((__packed__)); 60 61 struct lcd_olinuxino { 62 struct drm_panel panel; 63 struct device *dev; 64 struct i2c_client *client; 65 struct mutex mutex; 66 67 bool prepared; 68 bool enabled; 69 70 struct regulator *supply; 71 struct gpio_desc *enable_gpio; 72 73 struct lcd_olinuxino_eeprom eeprom; 74 }; 75 76 static inline struct lcd_olinuxino *to_lcd_olinuxino(struct drm_panel *panel) 77 { 78 return container_of(panel, struct lcd_olinuxino, panel); 79 } 80 81 static int lcd_olinuxino_disable(struct drm_panel *panel) 82 { 83 struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel); 84 85 if (!lcd->enabled) 86 return 0; 87 88 lcd->enabled = false; 89 90 return 0; 91 } 92 93 static int lcd_olinuxino_unprepare(struct drm_panel *panel) 94 { 95 struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel); 96 97 if (!lcd->prepared) 98 return 0; 99 100 gpiod_set_value_cansleep(lcd->enable_gpio, 0); 101 regulator_disable(lcd->supply); 102 103 lcd->prepared = false; 104 105 return 0; 106 } 107 108 static int lcd_olinuxino_prepare(struct drm_panel *panel) 109 { 110 struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel); 111 int ret; 112 113 if (lcd->prepared) 114 return 0; 115 116 ret = regulator_enable(lcd->supply); 117 if (ret < 0) 118 return ret; 119 120 gpiod_set_value_cansleep(lcd->enable_gpio, 1); 121 lcd->prepared = true; 122 123 return 0; 124 } 125 126 static int lcd_olinuxino_enable(struct drm_panel *panel) 127 { 128 struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel); 129 130 if (lcd->enabled) 131 return 0; 132 133 lcd->enabled = true; 134 135 return 0; 136 } 137 138 static int lcd_olinuxino_get_modes(struct drm_panel *panel, 139 struct drm_connector *connector) 140 { 141 struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel); 142 struct lcd_olinuxino_info *lcd_info = &lcd->eeprom.info; 143 struct lcd_olinuxino_mode *lcd_mode; 144 struct drm_display_mode *mode; 145 u32 i, num = 0; 146 147 for (i = 0; i < lcd->eeprom.num_modes; i++) { 148 lcd_mode = (struct lcd_olinuxino_mode *) 149 &lcd->eeprom.reserved[i * sizeof(*lcd_mode)]; 150 151 mode = drm_mode_create(connector->dev); 152 if (!mode) { 153 dev_err(panel->dev, "failed to add mode %ux%u@%u\n", 154 lcd_mode->hactive, 155 lcd_mode->vactive, 156 lcd_mode->refresh); 157 continue; 158 } 159 160 mode->clock = lcd_mode->pixelclock; 161 mode->hdisplay = lcd_mode->hactive; 162 mode->hsync_start = lcd_mode->hactive + lcd_mode->hfp; 163 mode->hsync_end = lcd_mode->hactive + lcd_mode->hfp + 164 lcd_mode->hpw; 165 mode->htotal = lcd_mode->hactive + lcd_mode->hfp + 166 lcd_mode->hpw + lcd_mode->hbp; 167 mode->vdisplay = lcd_mode->vactive; 168 mode->vsync_start = lcd_mode->vactive + lcd_mode->vfp; 169 mode->vsync_end = lcd_mode->vactive + lcd_mode->vfp + 170 lcd_mode->vpw; 171 mode->vtotal = lcd_mode->vactive + lcd_mode->vfp + 172 lcd_mode->vpw + lcd_mode->vbp; 173 174 /* Always make the first mode preferred */ 175 if (i == 0) 176 mode->type |= DRM_MODE_TYPE_PREFERRED; 177 mode->type |= DRM_MODE_TYPE_DRIVER; 178 179 drm_mode_set_name(mode); 180 drm_mode_probed_add(connector, mode); 181 182 num++; 183 } 184 185 connector->display_info.width_mm = lcd_info->width_mm; 186 connector->display_info.height_mm = lcd_info->height_mm; 187 connector->display_info.bpc = lcd_info->bpc; 188 189 if (lcd_info->bus_format) 190 drm_display_info_set_bus_formats(&connector->display_info, 191 &lcd_info->bus_format, 1); 192 connector->display_info.bus_flags = lcd_info->bus_flag; 193 194 return num; 195 } 196 197 static const struct drm_panel_funcs lcd_olinuxino_funcs = { 198 .disable = lcd_olinuxino_disable, 199 .unprepare = lcd_olinuxino_unprepare, 200 .prepare = lcd_olinuxino_prepare, 201 .enable = lcd_olinuxino_enable, 202 .get_modes = lcd_olinuxino_get_modes, 203 }; 204 205 static int lcd_olinuxino_probe(struct i2c_client *client, 206 const struct i2c_device_id *id) 207 { 208 struct device *dev = &client->dev; 209 struct lcd_olinuxino *lcd; 210 u32 checksum, i; 211 int ret = 0; 212 213 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | 214 I2C_FUNC_SMBUS_READ_I2C_BLOCK)) 215 return -ENODEV; 216 217 lcd = devm_kzalloc(dev, sizeof(*lcd), GFP_KERNEL); 218 if (!lcd) 219 return -ENOMEM; 220 221 i2c_set_clientdata(client, lcd); 222 lcd->dev = dev; 223 lcd->client = client; 224 225 mutex_init(&lcd->mutex); 226 227 /* Copy data into buffer */ 228 for (i = 0; i < LCD_OLINUXINO_DATA_LEN; i += I2C_SMBUS_BLOCK_MAX) { 229 mutex_lock(&lcd->mutex); 230 ret = i2c_smbus_read_i2c_block_data(client, 231 i, 232 I2C_SMBUS_BLOCK_MAX, 233 (u8 *)&lcd->eeprom + i); 234 mutex_unlock(&lcd->mutex); 235 if (ret < 0) { 236 dev_err(dev, "error reading from device at %02x\n", i); 237 return ret; 238 } 239 } 240 241 /* Check configuration checksum */ 242 checksum = ~crc32(~0, (u8 *)&lcd->eeprom, 252); 243 if (checksum != lcd->eeprom.checksum) { 244 dev_err(dev, "configuration checksum does not match!\n"); 245 return -EINVAL; 246 } 247 248 /* Check magic header */ 249 if (lcd->eeprom.header != LCD_OLINUXINO_HEADER_MAGIC) { 250 dev_err(dev, "magic header does not match\n"); 251 return -EINVAL; 252 } 253 254 dev_info(dev, "Detected %s, Rev. %s, Serial: %08x\n", 255 lcd->eeprom.info.name, 256 lcd->eeprom.revision, 257 lcd->eeprom.serial); 258 259 /* 260 * The eeprom can hold up to 4 modes. 261 * If the stored value is bigger, overwrite it. 262 */ 263 if (lcd->eeprom.num_modes > 4) { 264 dev_warn(dev, "invalid number of modes, falling back to 4\n"); 265 lcd->eeprom.num_modes = 4; 266 } 267 268 lcd->enabled = false; 269 lcd->prepared = false; 270 271 lcd->supply = devm_regulator_get(dev, "power"); 272 if (IS_ERR(lcd->supply)) 273 return PTR_ERR(lcd->supply); 274 275 lcd->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); 276 if (IS_ERR(lcd->enable_gpio)) 277 return PTR_ERR(lcd->enable_gpio); 278 279 drm_panel_init(&lcd->panel, dev, &lcd_olinuxino_funcs, 280 DRM_MODE_CONNECTOR_DPI); 281 282 ret = drm_panel_of_backlight(&lcd->panel); 283 if (ret) 284 return ret; 285 286 drm_panel_add(&lcd->panel); 287 288 return 0; 289 } 290 291 static void lcd_olinuxino_remove(struct i2c_client *client) 292 { 293 struct lcd_olinuxino *panel = i2c_get_clientdata(client); 294 295 drm_panel_remove(&panel->panel); 296 297 drm_panel_disable(&panel->panel); 298 drm_panel_unprepare(&panel->panel); 299 } 300 301 static const struct of_device_id lcd_olinuxino_of_ids[] = { 302 { .compatible = "olimex,lcd-olinuxino" }, 303 { } 304 }; 305 MODULE_DEVICE_TABLE(of, lcd_olinuxino_of_ids); 306 307 static struct i2c_driver lcd_olinuxino_driver = { 308 .driver = { 309 .name = "lcd_olinuxino", 310 .of_match_table = lcd_olinuxino_of_ids, 311 }, 312 .probe = lcd_olinuxino_probe, 313 .remove = lcd_olinuxino_remove, 314 }; 315 316 module_i2c_driver(lcd_olinuxino_driver); 317 318 MODULE_AUTHOR("Stefan Mavrodiev <stefan@olimex.com>"); 319 MODULE_DESCRIPTION("LCD-OLinuXino driver"); 320 MODULE_LICENSE("GPL"); 321