1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Innolux/Chimei EJ030NA TFT LCD panel driver 4 * 5 * Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net> 6 * Copyright (C) 2020, Christophe Branchereau <cbranchereau@gmail.com> 7 */ 8 9 #include <linux/delay.h> 10 #include <linux/device.h> 11 #include <linux/gpio/consumer.h> 12 #include <linux/media-bus-format.h> 13 #include <linux/module.h> 14 #include <linux/of_device.h> 15 #include <linux/regmap.h> 16 #include <linux/regulator/consumer.h> 17 #include <linux/spi/spi.h> 18 19 #include <drm/drm_modes.h> 20 #include <drm/drm_panel.h> 21 22 struct ej030na_info { 23 const struct drm_display_mode *display_modes; 24 unsigned int num_modes; 25 u16 width_mm, height_mm; 26 u32 bus_format, bus_flags; 27 }; 28 29 struct ej030na { 30 struct drm_panel panel; 31 struct spi_device *spi; 32 struct regmap *map; 33 34 const struct ej030na_info *panel_info; 35 36 struct regulator *supply; 37 struct gpio_desc *reset_gpio; 38 }; 39 40 static inline struct ej030na *to_ej030na(struct drm_panel *panel) 41 { 42 return container_of(panel, struct ej030na, panel); 43 } 44 45 static const struct reg_sequence ej030na_init_sequence[] = { 46 { 0x05, 0x1e }, 47 { 0x05, 0x5c }, 48 { 0x02, 0x14 }, 49 { 0x03, 0x40 }, 50 { 0x04, 0x07 }, 51 { 0x06, 0x12 }, 52 { 0x07, 0xd2 }, 53 { 0x0c, 0x06 }, 54 { 0x0d, 0x40 }, 55 { 0x0e, 0x40 }, 56 { 0x0f, 0x40 }, 57 { 0x10, 0x40 }, 58 { 0x11, 0x40 }, 59 { 0x2f, 0x40 }, 60 { 0x5a, 0x02 }, 61 62 { 0x30, 0x07 }, 63 { 0x31, 0x57 }, 64 { 0x32, 0x53 }, 65 { 0x33, 0x77 }, 66 { 0x34, 0xb8 }, 67 { 0x35, 0xbd }, 68 { 0x36, 0xb8 }, 69 { 0x37, 0xe7 }, 70 { 0x38, 0x04 }, 71 { 0x39, 0xff }, 72 73 { 0x40, 0x0b }, 74 { 0x41, 0xb8 }, 75 { 0x42, 0xab }, 76 { 0x43, 0xb9 }, 77 { 0x44, 0x6a }, 78 { 0x45, 0x56 }, 79 { 0x46, 0x61 }, 80 { 0x47, 0x08 }, 81 { 0x48, 0x0f }, 82 { 0x49, 0x0f }, 83 84 { 0x2b, 0x01 }, 85 }; 86 87 static int ej030na_prepare(struct drm_panel *panel) 88 { 89 struct ej030na *priv = to_ej030na(panel); 90 struct device *dev = &priv->spi->dev; 91 int err; 92 93 err = regulator_enable(priv->supply); 94 if (err) { 95 dev_err(dev, "Failed to enable power supply: %d\n", err); 96 return err; 97 } 98 99 /* Reset the chip */ 100 gpiod_set_value_cansleep(priv->reset_gpio, 1); 101 usleep_range(50, 150); 102 gpiod_set_value_cansleep(priv->reset_gpio, 0); 103 usleep_range(50, 150); 104 105 err = regmap_multi_reg_write(priv->map, ej030na_init_sequence, 106 ARRAY_SIZE(ej030na_init_sequence)); 107 if (err) { 108 dev_err(dev, "Failed to init registers: %d\n", err); 109 goto err_disable_regulator; 110 } 111 112 msleep(120); 113 114 return 0; 115 116 err_disable_regulator: 117 regulator_disable(priv->supply); 118 return err; 119 } 120 121 static int ej030na_unprepare(struct drm_panel *panel) 122 { 123 struct ej030na *priv = to_ej030na(panel); 124 125 gpiod_set_value_cansleep(priv->reset_gpio, 1); 126 regulator_disable(priv->supply); 127 128 return 0; 129 } 130 131 static int ej030na_get_modes(struct drm_panel *panel, 132 struct drm_connector *connector) 133 { 134 struct ej030na *priv = to_ej030na(panel); 135 const struct ej030na_info *panel_info = priv->panel_info; 136 struct drm_display_mode *mode; 137 unsigned int i; 138 139 for (i = 0; i < panel_info->num_modes; i++) { 140 mode = drm_mode_duplicate(connector->dev, 141 &panel_info->display_modes[i]); 142 if (!mode) 143 return -ENOMEM; 144 145 drm_mode_set_name(mode); 146 147 mode->type = DRM_MODE_TYPE_DRIVER; 148 if (panel_info->num_modes == 1) 149 mode->type |= DRM_MODE_TYPE_PREFERRED; 150 151 drm_mode_probed_add(connector, mode); 152 } 153 154 connector->display_info.bpc = 8; 155 connector->display_info.width_mm = panel_info->width_mm; 156 connector->display_info.height_mm = panel_info->height_mm; 157 158 drm_display_info_set_bus_formats(&connector->display_info, 159 &panel_info->bus_format, 1); 160 connector->display_info.bus_flags = panel_info->bus_flags; 161 162 return panel_info->num_modes; 163 } 164 165 static const struct drm_panel_funcs ej030na_funcs = { 166 .prepare = ej030na_prepare, 167 .unprepare = ej030na_unprepare, 168 .get_modes = ej030na_get_modes, 169 }; 170 171 static const struct regmap_config ej030na_regmap_config = { 172 .reg_bits = 8, 173 .val_bits = 8, 174 .max_register = 0x5a, 175 }; 176 177 static int ej030na_probe(struct spi_device *spi) 178 { 179 struct device *dev = &spi->dev; 180 struct ej030na *priv; 181 int err; 182 183 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 184 if (!priv) 185 return -ENOMEM; 186 187 priv->spi = spi; 188 spi_set_drvdata(spi, priv); 189 190 priv->map = devm_regmap_init_spi(spi, &ej030na_regmap_config); 191 if (IS_ERR(priv->map)) { 192 dev_err(dev, "Unable to init regmap\n"); 193 return PTR_ERR(priv->map); 194 } 195 196 priv->panel_info = of_device_get_match_data(dev); 197 if (!priv->panel_info) 198 return -EINVAL; 199 200 priv->supply = devm_regulator_get(dev, "power"); 201 if (IS_ERR(priv->supply)) 202 return dev_err_probe(dev, PTR_ERR(priv->supply), 203 "Failed to get power supply\n"); 204 205 priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); 206 if (IS_ERR(priv->reset_gpio)) 207 return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), 208 "Failed to get reset GPIO\n"); 209 210 drm_panel_init(&priv->panel, dev, &ej030na_funcs, 211 DRM_MODE_CONNECTOR_DPI); 212 213 err = drm_panel_of_backlight(&priv->panel); 214 if (err) 215 return err; 216 217 drm_panel_add(&priv->panel); 218 219 return 0; 220 } 221 222 static void ej030na_remove(struct spi_device *spi) 223 { 224 struct ej030na *priv = spi_get_drvdata(spi); 225 226 drm_panel_remove(&priv->panel); 227 drm_panel_disable(&priv->panel); 228 drm_panel_unprepare(&priv->panel); 229 } 230 231 static const struct drm_display_mode ej030na_modes[] = { 232 { /* 60 Hz */ 233 .clock = 14400, 234 .hdisplay = 320, 235 .hsync_start = 320 + 10, 236 .hsync_end = 320 + 10 + 37, 237 .htotal = 320 + 10 + 37 + 33, 238 .vdisplay = 480, 239 .vsync_start = 480 + 102, 240 .vsync_end = 480 + 102 + 9 + 9, 241 .vtotal = 480 + 102 + 9 + 9, 242 .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, 243 }, 244 { /* 50 Hz */ 245 .clock = 12000, 246 .hdisplay = 320, 247 .hsync_start = 320 + 10, 248 .hsync_end = 320 + 10 + 37, 249 .htotal = 320 + 10 + 37 + 33, 250 .vdisplay = 480, 251 .vsync_start = 480 + 102, 252 .vsync_end = 480 + 102 + 9, 253 .vtotal = 480 + 102 + 9 + 9, 254 .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, 255 }, 256 }; 257 258 static const struct ej030na_info ej030na_info = { 259 .display_modes = ej030na_modes, 260 .num_modes = ARRAY_SIZE(ej030na_modes), 261 .width_mm = 70, 262 .height_mm = 51, 263 .bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA, 264 .bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE | DRM_BUS_FLAG_DE_LOW, 265 }; 266 267 static const struct of_device_id ej030na_of_match[] = { 268 { .compatible = "innolux,ej030na", .data = &ej030na_info }, 269 { /* sentinel */ } 270 }; 271 MODULE_DEVICE_TABLE(of, ej030na_of_match); 272 273 static struct spi_driver ej030na_driver = { 274 .driver = { 275 .name = "panel-innolux-ej030na", 276 .of_match_table = ej030na_of_match, 277 }, 278 .probe = ej030na_probe, 279 .remove = ej030na_remove, 280 }; 281 module_spi_driver(ej030na_driver); 282 283 MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); 284 MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>"); 285 MODULE_LICENSE("GPL v2"); 286