xref: /linux/drivers/gpu/drm/nouveau/nouveau_bios.c (revision 791d3ef2e11100449837dc0b6fe884e60ca3a484)
1 /*
2  * Copyright 2005-2006 Erik Waling
3  * Copyright 2006 Stephane Marchesin
4  * Copyright 2007-2009 Stuart Bennett
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a
7  * copy of this software and associated documentation files (the "Software"),
8  * to deal in the Software without restriction, including without limitation
9  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10  * and/or sell copies of the Software, and to permit persons to whom the
11  * Software is furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
19  * THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
20  * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
21  * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
22  * SOFTWARE.
23  */
24 
25 #include <drm/drmP.h>
26 
27 #include "nouveau_drv.h"
28 #include "nouveau_reg.h"
29 #include "dispnv04/hw.h"
30 #include "nouveau_encoder.h"
31 
32 #include <linux/io-mapping.h>
33 #include <linux/firmware.h>
34 
35 /* these defines are made up */
36 #define NV_CIO_CRE_44_HEADA 0x0
37 #define NV_CIO_CRE_44_HEADB 0x3
38 #define FEATURE_MOBILE 0x10	/* also FEATURE_QUADRO for BMP */
39 
40 #define EDID1_LEN 128
41 
42 #define BIOSLOG(sip, fmt, arg...) NV_DEBUG(sip->dev, fmt, ##arg)
43 #define LOG_OLD_VALUE(x)
44 
45 struct init_exec {
46 	bool execute;
47 	bool repeat;
48 };
49 
50 static bool nv_cksum(const uint8_t *data, unsigned int length)
51 {
52 	/*
53 	 * There's a few checksums in the BIOS, so here's a generic checking
54 	 * function.
55 	 */
56 	int i;
57 	uint8_t sum = 0;
58 
59 	for (i = 0; i < length; i++)
60 		sum += data[i];
61 
62 	if (sum)
63 		return true;
64 
65 	return false;
66 }
67 
68 static uint16_t clkcmptable(struct nvbios *bios, uint16_t clktable, int pxclk)
69 {
70 	int compare_record_len, i = 0;
71 	uint16_t compareclk, scriptptr = 0;
72 
73 	if (bios->major_version < 5) /* pre BIT */
74 		compare_record_len = 3;
75 	else
76 		compare_record_len = 4;
77 
78 	do {
79 		compareclk = ROM16(bios->data[clktable + compare_record_len * i]);
80 		if (pxclk >= compareclk * 10) {
81 			if (bios->major_version < 5) {
82 				uint8_t tmdssub = bios->data[clktable + 2 + compare_record_len * i];
83 				scriptptr = ROM16(bios->data[bios->init_script_tbls_ptr + tmdssub * 2]);
84 			} else
85 				scriptptr = ROM16(bios->data[clktable + 2 + compare_record_len * i]);
86 			break;
87 		}
88 		i++;
89 	} while (compareclk);
90 
91 	return scriptptr;
92 }
93 
94 static void
95 run_digital_op_script(struct drm_device *dev, uint16_t scriptptr,
96 		      struct dcb_output *dcbent, int head, bool dl)
97 {
98 	struct nouveau_drm *drm = nouveau_drm(dev);
99 
100 	NV_INFO(drm, "0x%04X: Parsing digital output script table\n",
101 		 scriptptr);
102 	NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_44, head ? NV_CIO_CRE_44_HEADB :
103 					         NV_CIO_CRE_44_HEADA);
104 	nouveau_bios_run_init_table(dev, scriptptr, dcbent, head);
105 
106 	nv04_dfp_bind_head(dev, dcbent, head, dl);
107 }
108 
109 static int call_lvds_manufacturer_script(struct drm_device *dev, struct dcb_output *dcbent, int head, enum LVDS_script script)
110 {
111 	struct nouveau_drm *drm = nouveau_drm(dev);
112 	struct nvbios *bios = &drm->vbios;
113 	uint8_t sub = bios->data[bios->fp.xlated_entry + script] + (bios->fp.link_c_increment && dcbent->or & DCB_OUTPUT_C ? 1 : 0);
114 	uint16_t scriptofs = ROM16(bios->data[bios->init_script_tbls_ptr + sub * 2]);
115 
116 	if (!bios->fp.xlated_entry || !sub || !scriptofs)
117 		return -EINVAL;
118 
119 	run_digital_op_script(dev, scriptofs, dcbent, head, bios->fp.dual_link);
120 
121 	if (script == LVDS_PANEL_OFF) {
122 		/* off-on delay in ms */
123 		mdelay(ROM16(bios->data[bios->fp.xlated_entry + 7]));
124 	}
125 #ifdef __powerpc__
126 	/* Powerbook specific quirks */
127 	if (script == LVDS_RESET &&
128 	    (dev->pdev->device == 0x0179 || dev->pdev->device == 0x0189 ||
129 	     dev->pdev->device == 0x0329))
130 		nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
131 #endif
132 
133 	return 0;
134 }
135 
136 static int run_lvds_table(struct drm_device *dev, struct dcb_output *dcbent, int head, enum LVDS_script script, int pxclk)
137 {
138 	/*
139 	 * The BIT LVDS table's header has the information to setup the
140 	 * necessary registers. Following the standard 4 byte header are:
141 	 * A bitmask byte and a dual-link transition pxclk value for use in
142 	 * selecting the init script when not using straps; 4 script pointers
143 	 * for panel power, selected by output and on/off; and 8 table pointers
144 	 * for panel init, the needed one determined by output, and bits in the
145 	 * conf byte. These tables are similar to the TMDS tables, consisting
146 	 * of a list of pxclks and script pointers.
147 	 */
148 	struct nouveau_drm *drm = nouveau_drm(dev);
149 	struct nvbios *bios = &drm->vbios;
150 	unsigned int outputset = (dcbent->or == 4) ? 1 : 0;
151 	uint16_t scriptptr = 0, clktable;
152 
153 	/*
154 	 * For now we assume version 3.0 table - g80 support will need some
155 	 * changes
156 	 */
157 
158 	switch (script) {
159 	case LVDS_INIT:
160 		return -ENOSYS;
161 	case LVDS_BACKLIGHT_ON:
162 	case LVDS_PANEL_ON:
163 		scriptptr = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 7 + outputset * 2]);
164 		break;
165 	case LVDS_BACKLIGHT_OFF:
166 	case LVDS_PANEL_OFF:
167 		scriptptr = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 11 + outputset * 2]);
168 		break;
169 	case LVDS_RESET:
170 		clktable = bios->fp.lvdsmanufacturerpointer + 15;
171 		if (dcbent->or == 4)
172 			clktable += 8;
173 
174 		if (dcbent->lvdsconf.use_straps_for_mode) {
175 			if (bios->fp.dual_link)
176 				clktable += 4;
177 			if (bios->fp.if_is_24bit)
178 				clktable += 2;
179 		} else {
180 			/* using EDID */
181 			int cmpval_24bit = (dcbent->or == 4) ? 4 : 1;
182 
183 			if (bios->fp.dual_link) {
184 				clktable += 4;
185 				cmpval_24bit <<= 1;
186 			}
187 
188 			if (bios->fp.strapless_is_24bit & cmpval_24bit)
189 				clktable += 2;
190 		}
191 
192 		clktable = ROM16(bios->data[clktable]);
193 		if (!clktable) {
194 			NV_ERROR(drm, "Pixel clock comparison table not found\n");
195 			return -ENOENT;
196 		}
197 		scriptptr = clkcmptable(bios, clktable, pxclk);
198 	}
199 
200 	if (!scriptptr) {
201 		NV_ERROR(drm, "LVDS output init script not found\n");
202 		return -ENOENT;
203 	}
204 	run_digital_op_script(dev, scriptptr, dcbent, head, bios->fp.dual_link);
205 
206 	return 0;
207 }
208 
209 int call_lvds_script(struct drm_device *dev, struct dcb_output *dcbent, int head, enum LVDS_script script, int pxclk)
210 {
211 	/*
212 	 * LVDS operations are multiplexed in an effort to present a single API
213 	 * which works with two vastly differing underlying structures.
214 	 * This acts as the demux
215 	 */
216 
217 	struct nouveau_drm *drm = nouveau_drm(dev);
218 	struct nvif_object *device = &drm->client.device.object;
219 	struct nvbios *bios = &drm->vbios;
220 	uint8_t lvds_ver = bios->data[bios->fp.lvdsmanufacturerpointer];
221 	uint32_t sel_clk_binding, sel_clk;
222 	int ret;
223 
224 	if (bios->fp.last_script_invoc == (script << 1 | head) || !lvds_ver ||
225 	    (lvds_ver >= 0x30 && script == LVDS_INIT))
226 		return 0;
227 
228 	if (!bios->fp.lvds_init_run) {
229 		bios->fp.lvds_init_run = true;
230 		call_lvds_script(dev, dcbent, head, LVDS_INIT, pxclk);
231 	}
232 
233 	if (script == LVDS_PANEL_ON && bios->fp.reset_after_pclk_change)
234 		call_lvds_script(dev, dcbent, head, LVDS_RESET, pxclk);
235 	if (script == LVDS_RESET && bios->fp.power_off_for_reset)
236 		call_lvds_script(dev, dcbent, head, LVDS_PANEL_OFF, pxclk);
237 
238 	NV_INFO(drm, "Calling LVDS script %d:\n", script);
239 
240 	/* don't let script change pll->head binding */
241 	sel_clk_binding = nvif_rd32(device, NV_PRAMDAC_SEL_CLK) & 0x50000;
242 
243 	if (lvds_ver < 0x30)
244 		ret = call_lvds_manufacturer_script(dev, dcbent, head, script);
245 	else
246 		ret = run_lvds_table(dev, dcbent, head, script, pxclk);
247 
248 	bios->fp.last_script_invoc = (script << 1 | head);
249 
250 	sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK) & ~0x50000;
251 	NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, sel_clk | sel_clk_binding);
252 	/* some scripts set a value in NV_PBUS_POWERCTRL_2 and break video overlay */
253 	nvif_wr32(device, NV_PBUS_POWERCTRL_2, 0);
254 
255 	return ret;
256 }
257 
258 struct lvdstableheader {
259 	uint8_t lvds_ver, headerlen, recordlen;
260 };
261 
262 static int parse_lvds_manufacturer_table_header(struct drm_device *dev, struct nvbios *bios, struct lvdstableheader *lth)
263 {
264 	/*
265 	 * BMP version (0xa) LVDS table has a simple header of version and
266 	 * record length. The BIT LVDS table has the typical BIT table header:
267 	 * version byte, header length byte, record length byte, and a byte for
268 	 * the maximum number of records that can be held in the table.
269 	 */
270 
271 	struct nouveau_drm *drm = nouveau_drm(dev);
272 	uint8_t lvds_ver, headerlen, recordlen;
273 
274 	memset(lth, 0, sizeof(struct lvdstableheader));
275 
276 	if (bios->fp.lvdsmanufacturerpointer == 0x0) {
277 		NV_ERROR(drm, "Pointer to LVDS manufacturer table invalid\n");
278 		return -EINVAL;
279 	}
280 
281 	lvds_ver = bios->data[bios->fp.lvdsmanufacturerpointer];
282 
283 	switch (lvds_ver) {
284 	case 0x0a:	/* pre NV40 */
285 		headerlen = 2;
286 		recordlen = bios->data[bios->fp.lvdsmanufacturerpointer + 1];
287 		break;
288 	case 0x30:	/* NV4x */
289 		headerlen = bios->data[bios->fp.lvdsmanufacturerpointer + 1];
290 		if (headerlen < 0x1f) {
291 			NV_ERROR(drm, "LVDS table header not understood\n");
292 			return -EINVAL;
293 		}
294 		recordlen = bios->data[bios->fp.lvdsmanufacturerpointer + 2];
295 		break;
296 	case 0x40:	/* G80/G90 */
297 		headerlen = bios->data[bios->fp.lvdsmanufacturerpointer + 1];
298 		if (headerlen < 0x7) {
299 			NV_ERROR(drm, "LVDS table header not understood\n");
300 			return -EINVAL;
301 		}
302 		recordlen = bios->data[bios->fp.lvdsmanufacturerpointer + 2];
303 		break;
304 	default:
305 		NV_ERROR(drm,
306 			 "LVDS table revision %d.%d not currently supported\n",
307 			 lvds_ver >> 4, lvds_ver & 0xf);
308 		return -ENOSYS;
309 	}
310 
311 	lth->lvds_ver = lvds_ver;
312 	lth->headerlen = headerlen;
313 	lth->recordlen = recordlen;
314 
315 	return 0;
316 }
317 
318 static int
319 get_fp_strap(struct drm_device *dev, struct nvbios *bios)
320 {
321 	struct nouveau_drm *drm = nouveau_drm(dev);
322 	struct nvif_object *device = &drm->client.device.object;
323 
324 	/*
325 	 * The fp strap is normally dictated by the "User Strap" in
326 	 * PEXTDEV_BOOT_0[20:16], but on BMP cards when bit 2 of the
327 	 * Internal_Flags struct at 0x48 is set, the user strap gets overriden
328 	 * by the PCI subsystem ID during POST, but not before the previous user
329 	 * strap has been committed to CR58 for CR57=0xf on head A, which may be
330 	 * read and used instead
331 	 */
332 
333 	if (bios->major_version < 5 && bios->data[0x48] & 0x4)
334 		return NVReadVgaCrtc5758(dev, 0, 0xf) & 0xf;
335 
336 	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_MAXWELL)
337 		return nvif_rd32(device, 0x001800) & 0x0000000f;
338 	else
339 	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_TESLA)
340 		return (nvif_rd32(device, NV_PEXTDEV_BOOT_0) >> 24) & 0xf;
341 	else
342 		return (nvif_rd32(device, NV_PEXTDEV_BOOT_0) >> 16) & 0xf;
343 }
344 
345 static int parse_fp_mode_table(struct drm_device *dev, struct nvbios *bios)
346 {
347 	struct nouveau_drm *drm = nouveau_drm(dev);
348 	uint8_t *fptable;
349 	uint8_t fptable_ver, headerlen = 0, recordlen, fpentries = 0xf, fpindex;
350 	int ret, ofs, fpstrapping;
351 	struct lvdstableheader lth;
352 
353 	if (bios->fp.fptablepointer == 0x0) {
354 		/* Most laptop cards lack an fp table. They use DDC. */
355 		NV_DEBUG(drm, "Pointer to flat panel table invalid\n");
356 		bios->digital_min_front_porch = 0x4b;
357 		return 0;
358 	}
359 
360 	fptable = &bios->data[bios->fp.fptablepointer];
361 	fptable_ver = fptable[0];
362 
363 	switch (fptable_ver) {
364 	/*
365 	 * BMP version 0x5.0x11 BIOSen have version 1 like tables, but no
366 	 * version field, and miss one of the spread spectrum/PWM bytes.
367 	 * This could affect early GF2Go parts (not seen any appropriate ROMs
368 	 * though). Here we assume that a version of 0x05 matches this case
369 	 * (combining with a BMP version check would be better), as the
370 	 * common case for the panel type field is 0x0005, and that is in
371 	 * fact what we are reading the first byte of.
372 	 */
373 	case 0x05:	/* some NV10, 11, 15, 16 */
374 		recordlen = 42;
375 		ofs = -1;
376 		break;
377 	case 0x10:	/* some NV15/16, and NV11+ */
378 		recordlen = 44;
379 		ofs = 0;
380 		break;
381 	case 0x20:	/* NV40+ */
382 		headerlen = fptable[1];
383 		recordlen = fptable[2];
384 		fpentries = fptable[3];
385 		/*
386 		 * fptable[4] is the minimum
387 		 * RAMDAC_FP_HCRTC -> RAMDAC_FP_HSYNC_START gap
388 		 */
389 		bios->digital_min_front_porch = fptable[4];
390 		ofs = -7;
391 		break;
392 	default:
393 		NV_ERROR(drm,
394 			 "FP table revision %d.%d not currently supported\n",
395 			 fptable_ver >> 4, fptable_ver & 0xf);
396 		return -ENOSYS;
397 	}
398 
399 	if (!bios->is_mobile) /* !mobile only needs digital_min_front_porch */
400 		return 0;
401 
402 	ret = parse_lvds_manufacturer_table_header(dev, bios, &lth);
403 	if (ret)
404 		return ret;
405 
406 	if (lth.lvds_ver == 0x30 || lth.lvds_ver == 0x40) {
407 		bios->fp.fpxlatetableptr = bios->fp.lvdsmanufacturerpointer +
408 							lth.headerlen + 1;
409 		bios->fp.xlatwidth = lth.recordlen;
410 	}
411 	if (bios->fp.fpxlatetableptr == 0x0) {
412 		NV_ERROR(drm, "Pointer to flat panel xlat table invalid\n");
413 		return -EINVAL;
414 	}
415 
416 	fpstrapping = get_fp_strap(dev, bios);
417 
418 	fpindex = bios->data[bios->fp.fpxlatetableptr +
419 					fpstrapping * bios->fp.xlatwidth];
420 
421 	if (fpindex > fpentries) {
422 		NV_ERROR(drm, "Bad flat panel table index\n");
423 		return -ENOENT;
424 	}
425 
426 	/* nv4x cards need both a strap value and fpindex of 0xf to use DDC */
427 	if (lth.lvds_ver > 0x10)
428 		bios->fp_no_ddc = fpstrapping != 0xf || fpindex != 0xf;
429 
430 	/*
431 	 * If either the strap or xlated fpindex value are 0xf there is no
432 	 * panel using a strap-derived bios mode present.  this condition
433 	 * includes, but is different from, the DDC panel indicator above
434 	 */
435 	if (fpstrapping == 0xf || fpindex == 0xf)
436 		return 0;
437 
438 	bios->fp.mode_ptr = bios->fp.fptablepointer + headerlen +
439 			    recordlen * fpindex + ofs;
440 
441 	NV_INFO(drm, "BIOS FP mode: %dx%d (%dkHz pixel clock)\n",
442 		 ROM16(bios->data[bios->fp.mode_ptr + 11]) + 1,
443 		 ROM16(bios->data[bios->fp.mode_ptr + 25]) + 1,
444 		 ROM16(bios->data[bios->fp.mode_ptr + 7]) * 10);
445 
446 	return 0;
447 }
448 
449 bool nouveau_bios_fp_mode(struct drm_device *dev, struct drm_display_mode *mode)
450 {
451 	struct nouveau_drm *drm = nouveau_drm(dev);
452 	struct nvbios *bios = &drm->vbios;
453 	uint8_t *mode_entry = &bios->data[bios->fp.mode_ptr];
454 
455 	if (!mode)	/* just checking whether we can produce a mode */
456 		return bios->fp.mode_ptr;
457 
458 	memset(mode, 0, sizeof(struct drm_display_mode));
459 	/*
460 	 * For version 1.0 (version in byte 0):
461 	 * bytes 1-2 are "panel type", including bits on whether Colour/mono,
462 	 * single/dual link, and type (TFT etc.)
463 	 * bytes 3-6 are bits per colour in RGBX
464 	 */
465 	mode->clock = ROM16(mode_entry[7]) * 10;
466 	/* bytes 9-10 is HActive */
467 	mode->hdisplay = ROM16(mode_entry[11]) + 1;
468 	/*
469 	 * bytes 13-14 is HValid Start
470 	 * bytes 15-16 is HValid End
471 	 */
472 	mode->hsync_start = ROM16(mode_entry[17]) + 1;
473 	mode->hsync_end = ROM16(mode_entry[19]) + 1;
474 	mode->htotal = ROM16(mode_entry[21]) + 1;
475 	/* bytes 23-24, 27-30 similarly, but vertical */
476 	mode->vdisplay = ROM16(mode_entry[25]) + 1;
477 	mode->vsync_start = ROM16(mode_entry[31]) + 1;
478 	mode->vsync_end = ROM16(mode_entry[33]) + 1;
479 	mode->vtotal = ROM16(mode_entry[35]) + 1;
480 	mode->flags |= (mode_entry[37] & 0x10) ?
481 			DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
482 	mode->flags |= (mode_entry[37] & 0x1) ?
483 			DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
484 	/*
485 	 * bytes 38-39 relate to spread spectrum settings
486 	 * bytes 40-43 are something to do with PWM
487 	 */
488 
489 	mode->status = MODE_OK;
490 	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
491 	drm_mode_set_name(mode);
492 	return bios->fp.mode_ptr;
493 }
494 
495 int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, bool *if_is_24bit)
496 {
497 	/*
498 	 * The LVDS table header is (mostly) described in
499 	 * parse_lvds_manufacturer_table_header(): the BIT header additionally
500 	 * contains the dual-link transition pxclk (in 10s kHz), at byte 5 - if
501 	 * straps are not being used for the panel, this specifies the frequency
502 	 * at which modes should be set up in the dual link style.
503 	 *
504 	 * Following the header, the BMP (ver 0xa) table has several records,
505 	 * indexed by a separate xlat table, indexed in turn by the fp strap in
506 	 * EXTDEV_BOOT. Each record had a config byte, followed by 6 script
507 	 * numbers for use by INIT_SUB which controlled panel init and power,
508 	 * and finally a dword of ms to sleep between power off and on
509 	 * operations.
510 	 *
511 	 * In the BIT versions, the table following the header serves as an
512 	 * integrated config and xlat table: the records in the table are
513 	 * indexed by the FP strap nibble in EXTDEV_BOOT, and each record has
514 	 * two bytes - the first as a config byte, the second for indexing the
515 	 * fp mode table pointed to by the BIT 'D' table
516 	 *
517 	 * DDC is not used until after card init, so selecting the correct table
518 	 * entry and setting the dual link flag for EDID equipped panels,
519 	 * requiring tests against the native-mode pixel clock, cannot be done
520 	 * until later, when this function should be called with non-zero pxclk
521 	 */
522 	struct nouveau_drm *drm = nouveau_drm(dev);
523 	struct nvbios *bios = &drm->vbios;
524 	int fpstrapping = get_fp_strap(dev, bios), lvdsmanufacturerindex = 0;
525 	struct lvdstableheader lth;
526 	uint16_t lvdsofs;
527 	int ret, chip_version = bios->chip_version;
528 
529 	ret = parse_lvds_manufacturer_table_header(dev, bios, &lth);
530 	if (ret)
531 		return ret;
532 
533 	switch (lth.lvds_ver) {
534 	case 0x0a:	/* pre NV40 */
535 		lvdsmanufacturerindex = bios->data[
536 					bios->fp.fpxlatemanufacturertableptr +
537 					fpstrapping];
538 
539 		/* we're done if this isn't the EDID panel case */
540 		if (!pxclk)
541 			break;
542 
543 		if (chip_version < 0x25) {
544 			/* nv17 behaviour
545 			 *
546 			 * It seems the old style lvds script pointer is reused
547 			 * to select 18/24 bit colour depth for EDID panels.
548 			 */
549 			lvdsmanufacturerindex =
550 				(bios->legacy.lvds_single_a_script_ptr & 1) ?
551 									2 : 0;
552 			if (pxclk >= bios->fp.duallink_transition_clk)
553 				lvdsmanufacturerindex++;
554 		} else if (chip_version < 0x30) {
555 			/* nv28 behaviour (off-chip encoder)
556 			 *
557 			 * nv28 does a complex dance of first using byte 121 of
558 			 * the EDID to choose the lvdsmanufacturerindex, then
559 			 * later attempting to match the EDID manufacturer and
560 			 * product IDs in a table (signature 'pidt' (panel id
561 			 * table?)), setting an lvdsmanufacturerindex of 0 and
562 			 * an fp strap of the match index (or 0xf if none)
563 			 */
564 			lvdsmanufacturerindex = 0;
565 		} else {
566 			/* nv31, nv34 behaviour */
567 			lvdsmanufacturerindex = 0;
568 			if (pxclk >= bios->fp.duallink_transition_clk)
569 				lvdsmanufacturerindex = 2;
570 			if (pxclk >= 140000)
571 				lvdsmanufacturerindex = 3;
572 		}
573 
574 		/*
575 		 * nvidia set the high nibble of (cr57=f, cr58) to
576 		 * lvdsmanufacturerindex in this case; we don't
577 		 */
578 		break;
579 	case 0x30:	/* NV4x */
580 	case 0x40:	/* G80/G90 */
581 		lvdsmanufacturerindex = fpstrapping;
582 		break;
583 	default:
584 		NV_ERROR(drm, "LVDS table revision not currently supported\n");
585 		return -ENOSYS;
586 	}
587 
588 	lvdsofs = bios->fp.xlated_entry = bios->fp.lvdsmanufacturerpointer + lth.headerlen + lth.recordlen * lvdsmanufacturerindex;
589 	switch (lth.lvds_ver) {
590 	case 0x0a:
591 		bios->fp.power_off_for_reset = bios->data[lvdsofs] & 1;
592 		bios->fp.reset_after_pclk_change = bios->data[lvdsofs] & 2;
593 		bios->fp.dual_link = bios->data[lvdsofs] & 4;
594 		bios->fp.link_c_increment = bios->data[lvdsofs] & 8;
595 		*if_is_24bit = bios->data[lvdsofs] & 16;
596 		break;
597 	case 0x30:
598 	case 0x40:
599 		/*
600 		 * No sign of the "power off for reset" or "reset for panel
601 		 * on" bits, but it's safer to assume we should
602 		 */
603 		bios->fp.power_off_for_reset = true;
604 		bios->fp.reset_after_pclk_change = true;
605 
606 		/*
607 		 * It's ok lvdsofs is wrong for nv4x edid case; dual_link is
608 		 * over-written, and if_is_24bit isn't used
609 		 */
610 		bios->fp.dual_link = bios->data[lvdsofs] & 1;
611 		bios->fp.if_is_24bit = bios->data[lvdsofs] & 2;
612 		bios->fp.strapless_is_24bit = bios->data[bios->fp.lvdsmanufacturerpointer + 4];
613 		bios->fp.duallink_transition_clk = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 5]) * 10;
614 		break;
615 	}
616 
617 	/* set dual_link flag for EDID case */
618 	if (pxclk && (chip_version < 0x25 || chip_version > 0x28))
619 		bios->fp.dual_link = (pxclk >= bios->fp.duallink_transition_clk);
620 
621 	*dl = bios->fp.dual_link;
622 
623 	return 0;
624 }
625 
626 int run_tmds_table(struct drm_device *dev, struct dcb_output *dcbent, int head, int pxclk)
627 {
628 	/*
629 	 * the pxclk parameter is in kHz
630 	 *
631 	 * This runs the TMDS regs setting code found on BIT bios cards
632 	 *
633 	 * For ffs(or) == 1 use the first table, for ffs(or) == 2 and
634 	 * ffs(or) == 3, use the second.
635 	 */
636 
637 	struct nouveau_drm *drm = nouveau_drm(dev);
638 	struct nvif_object *device = &drm->client.device.object;
639 	struct nvbios *bios = &drm->vbios;
640 	int cv = bios->chip_version;
641 	uint16_t clktable = 0, scriptptr;
642 	uint32_t sel_clk_binding, sel_clk;
643 
644 	/* pre-nv17 off-chip tmds uses scripts, post nv17 doesn't */
645 	if (cv >= 0x17 && cv != 0x1a && cv != 0x20 &&
646 	    dcbent->location != DCB_LOC_ON_CHIP)
647 		return 0;
648 
649 	switch (ffs(dcbent->or)) {
650 	case 1:
651 		clktable = bios->tmds.output0_script_ptr;
652 		break;
653 	case 2:
654 	case 3:
655 		clktable = bios->tmds.output1_script_ptr;
656 		break;
657 	}
658 
659 	if (!clktable) {
660 		NV_ERROR(drm, "Pixel clock comparison table not found\n");
661 		return -EINVAL;
662 	}
663 
664 	scriptptr = clkcmptable(bios, clktable, pxclk);
665 
666 	if (!scriptptr) {
667 		NV_ERROR(drm, "TMDS output init script not found\n");
668 		return -ENOENT;
669 	}
670 
671 	/* don't let script change pll->head binding */
672 	sel_clk_binding = nvif_rd32(device, NV_PRAMDAC_SEL_CLK) & 0x50000;
673 	run_digital_op_script(dev, scriptptr, dcbent, head, pxclk >= 165000);
674 	sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK) & ~0x50000;
675 	NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, sel_clk | sel_clk_binding);
676 
677 	return 0;
678 }
679 
680 static void parse_script_table_pointers(struct nvbios *bios, uint16_t offset)
681 {
682 	/*
683 	 * Parses the init table segment for pointers used in script execution.
684 	 *
685 	 * offset + 0  (16 bits): init script tables pointer
686 	 * offset + 2  (16 bits): macro index table pointer
687 	 * offset + 4  (16 bits): macro table pointer
688 	 * offset + 6  (16 bits): condition table pointer
689 	 * offset + 8  (16 bits): io condition table pointer
690 	 * offset + 10 (16 bits): io flag condition table pointer
691 	 * offset + 12 (16 bits): init function table pointer
692 	 */
693 
694 	bios->init_script_tbls_ptr = ROM16(bios->data[offset]);
695 }
696 
697 static int parse_bit_A_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
698 {
699 	/*
700 	 * Parses the load detect values for g80 cards.
701 	 *
702 	 * offset + 0 (16 bits): loadval table pointer
703 	 */
704 
705 	struct nouveau_drm *drm = nouveau_drm(dev);
706 	uint16_t load_table_ptr;
707 	uint8_t version, headerlen, entrylen, num_entries;
708 
709 	if (bitentry->length != 3) {
710 		NV_ERROR(drm, "Do not understand BIT A table\n");
711 		return -EINVAL;
712 	}
713 
714 	load_table_ptr = ROM16(bios->data[bitentry->offset]);
715 
716 	if (load_table_ptr == 0x0) {
717 		NV_DEBUG(drm, "Pointer to BIT loadval table invalid\n");
718 		return -EINVAL;
719 	}
720 
721 	version = bios->data[load_table_ptr];
722 
723 	if (version != 0x10) {
724 		NV_ERROR(drm, "BIT loadval table version %d.%d not supported\n",
725 			 version >> 4, version & 0xF);
726 		return -ENOSYS;
727 	}
728 
729 	headerlen = bios->data[load_table_ptr + 1];
730 	entrylen = bios->data[load_table_ptr + 2];
731 	num_entries = bios->data[load_table_ptr + 3];
732 
733 	if (headerlen != 4 || entrylen != 4 || num_entries != 2) {
734 		NV_ERROR(drm, "Do not understand BIT loadval table\n");
735 		return -EINVAL;
736 	}
737 
738 	/* First entry is normal dac, 2nd tv-out perhaps? */
739 	bios->dactestval = ROM32(bios->data[load_table_ptr + headerlen]) & 0x3ff;
740 
741 	return 0;
742 }
743 
744 static int parse_bit_display_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
745 {
746 	/*
747 	 * Parses the flat panel table segment that the bit entry points to.
748 	 * Starting at bitentry->offset:
749 	 *
750 	 * offset + 0  (16 bits): ??? table pointer - seems to have 18 byte
751 	 * records beginning with a freq.
752 	 * offset + 2  (16 bits): mode table pointer
753 	 */
754 	struct nouveau_drm *drm = nouveau_drm(dev);
755 
756 	if (bitentry->length != 4) {
757 		NV_ERROR(drm, "Do not understand BIT display table\n");
758 		return -EINVAL;
759 	}
760 
761 	bios->fp.fptablepointer = ROM16(bios->data[bitentry->offset + 2]);
762 
763 	return 0;
764 }
765 
766 static int parse_bit_init_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
767 {
768 	/*
769 	 * Parses the init table segment that the bit entry points to.
770 	 *
771 	 * See parse_script_table_pointers for layout
772 	 */
773 	struct nouveau_drm *drm = nouveau_drm(dev);
774 
775 	if (bitentry->length < 14) {
776 		NV_ERROR(drm, "Do not understand init table\n");
777 		return -EINVAL;
778 	}
779 
780 	parse_script_table_pointers(bios, bitentry->offset);
781 	return 0;
782 }
783 
784 static int parse_bit_i_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
785 {
786 	/*
787 	 * BIT 'i' (info?) table
788 	 *
789 	 * offset + 0  (32 bits): BIOS version dword (as in B table)
790 	 * offset + 5  (8  bits): BIOS feature byte (same as for BMP?)
791 	 * offset + 13 (16 bits): pointer to table containing DAC load
792 	 * detection comparison values
793 	 *
794 	 * There's other things in the table, purpose unknown
795 	 */
796 
797 	struct nouveau_drm *drm = nouveau_drm(dev);
798 	uint16_t daccmpoffset;
799 	uint8_t dacver, dacheaderlen;
800 
801 	if (bitentry->length < 6) {
802 		NV_ERROR(drm, "BIT i table too short for needed information\n");
803 		return -EINVAL;
804 	}
805 
806 	/*
807 	 * bit 4 seems to indicate a mobile bios (doesn't suffer from BMP's
808 	 * Quadro identity crisis), other bits possibly as for BMP feature byte
809 	 */
810 	bios->feature_byte = bios->data[bitentry->offset + 5];
811 	bios->is_mobile = bios->feature_byte & FEATURE_MOBILE;
812 
813 	if (bitentry->length < 15) {
814 		NV_WARN(drm, "BIT i table not long enough for DAC load "
815 			       "detection comparison table\n");
816 		return -EINVAL;
817 	}
818 
819 	daccmpoffset = ROM16(bios->data[bitentry->offset + 13]);
820 
821 	/* doesn't exist on g80 */
822 	if (!daccmpoffset)
823 		return 0;
824 
825 	/*
826 	 * The first value in the table, following the header, is the
827 	 * comparison value, the second entry is a comparison value for
828 	 * TV load detection.
829 	 */
830 
831 	dacver = bios->data[daccmpoffset];
832 	dacheaderlen = bios->data[daccmpoffset + 1];
833 
834 	if (dacver != 0x00 && dacver != 0x10) {
835 		NV_WARN(drm, "DAC load detection comparison table version "
836 			       "%d.%d not known\n", dacver >> 4, dacver & 0xf);
837 		return -ENOSYS;
838 	}
839 
840 	bios->dactestval = ROM32(bios->data[daccmpoffset + dacheaderlen]);
841 	bios->tvdactestval = ROM32(bios->data[daccmpoffset + dacheaderlen + 4]);
842 
843 	return 0;
844 }
845 
846 static int parse_bit_lvds_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
847 {
848 	/*
849 	 * Parses the LVDS table segment that the bit entry points to.
850 	 * Starting at bitentry->offset:
851 	 *
852 	 * offset + 0  (16 bits): LVDS strap xlate table pointer
853 	 */
854 
855 	struct nouveau_drm *drm = nouveau_drm(dev);
856 
857 	if (bitentry->length != 2) {
858 		NV_ERROR(drm, "Do not understand BIT LVDS table\n");
859 		return -EINVAL;
860 	}
861 
862 	/*
863 	 * No idea if it's still called the LVDS manufacturer table, but
864 	 * the concept's close enough.
865 	 */
866 	bios->fp.lvdsmanufacturerpointer = ROM16(bios->data[bitentry->offset]);
867 
868 	return 0;
869 }
870 
871 static int
872 parse_bit_M_tbl_entry(struct drm_device *dev, struct nvbios *bios,
873 		      struct bit_entry *bitentry)
874 {
875 	/*
876 	 * offset + 2  (8  bits): number of options in an
877 	 * 	INIT_RAM_RESTRICT_ZM_REG_GROUP opcode option set
878 	 * offset + 3  (16 bits): pointer to strap xlate table for RAM
879 	 * 	restrict option selection
880 	 *
881 	 * There's a bunch of bits in this table other than the RAM restrict
882 	 * stuff that we don't use - their use currently unknown
883 	 */
884 
885 	/*
886 	 * Older bios versions don't have a sufficiently long table for
887 	 * what we want
888 	 */
889 	if (bitentry->length < 0x5)
890 		return 0;
891 
892 	if (bitentry->version < 2) {
893 		bios->ram_restrict_group_count = bios->data[bitentry->offset + 2];
894 		bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 3]);
895 	} else {
896 		bios->ram_restrict_group_count = bios->data[bitentry->offset + 0];
897 		bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 1]);
898 	}
899 
900 	return 0;
901 }
902 
903 static int parse_bit_tmds_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
904 {
905 	/*
906 	 * Parses the pointer to the TMDS table
907 	 *
908 	 * Starting at bitentry->offset:
909 	 *
910 	 * offset + 0  (16 bits): TMDS table pointer
911 	 *
912 	 * The TMDS table is typically found just before the DCB table, with a
913 	 * characteristic signature of 0x11,0x13 (1.1 being version, 0x13 being
914 	 * length?)
915 	 *
916 	 * At offset +7 is a pointer to a script, which I don't know how to
917 	 * run yet.
918 	 * At offset +9 is a pointer to another script, likewise
919 	 * Offset +11 has a pointer to a table where the first word is a pxclk
920 	 * frequency and the second word a pointer to a script, which should be
921 	 * run if the comparison pxclk frequency is less than the pxclk desired.
922 	 * This repeats for decreasing comparison frequencies
923 	 * Offset +13 has a pointer to a similar table
924 	 * The selection of table (and possibly +7/+9 script) is dictated by
925 	 * "or" from the DCB.
926 	 */
927 
928 	struct nouveau_drm *drm = nouveau_drm(dev);
929 	uint16_t tmdstableptr, script1, script2;
930 
931 	if (bitentry->length != 2) {
932 		NV_ERROR(drm, "Do not understand BIT TMDS table\n");
933 		return -EINVAL;
934 	}
935 
936 	tmdstableptr = ROM16(bios->data[bitentry->offset]);
937 	if (!tmdstableptr) {
938 		NV_ERROR(drm, "Pointer to TMDS table invalid\n");
939 		return -EINVAL;
940 	}
941 
942 	NV_INFO(drm, "TMDS table version %d.%d\n",
943 		bios->data[tmdstableptr] >> 4, bios->data[tmdstableptr] & 0xf);
944 
945 	/* nv50+ has v2.0, but we don't parse it atm */
946 	if (bios->data[tmdstableptr] != 0x11)
947 		return -ENOSYS;
948 
949 	/*
950 	 * These two scripts are odd: they don't seem to get run even when
951 	 * they are not stubbed.
952 	 */
953 	script1 = ROM16(bios->data[tmdstableptr + 7]);
954 	script2 = ROM16(bios->data[tmdstableptr + 9]);
955 	if (bios->data[script1] != 'q' || bios->data[script2] != 'q')
956 		NV_WARN(drm, "TMDS table script pointers not stubbed\n");
957 
958 	bios->tmds.output0_script_ptr = ROM16(bios->data[tmdstableptr + 11]);
959 	bios->tmds.output1_script_ptr = ROM16(bios->data[tmdstableptr + 13]);
960 
961 	return 0;
962 }
963 
964 struct bit_table {
965 	const char id;
966 	int (* const parse_fn)(struct drm_device *, struct nvbios *, struct bit_entry *);
967 };
968 
969 #define BIT_TABLE(id, funcid) ((struct bit_table){ id, parse_bit_##funcid##_tbl_entry })
970 
971 int
972 bit_table(struct drm_device *dev, u8 id, struct bit_entry *bit)
973 {
974 	struct nouveau_drm *drm = nouveau_drm(dev);
975 	struct nvbios *bios = &drm->vbios;
976 	u8 entries, *entry;
977 
978 	if (bios->type != NVBIOS_BIT)
979 		return -ENODEV;
980 
981 	entries = bios->data[bios->offset + 10];
982 	entry   = &bios->data[bios->offset + 12];
983 	while (entries--) {
984 		if (entry[0] == id) {
985 			bit->id = entry[0];
986 			bit->version = entry[1];
987 			bit->length = ROM16(entry[2]);
988 			bit->offset = ROM16(entry[4]);
989 			bit->data = ROMPTR(dev, entry[4]);
990 			return 0;
991 		}
992 
993 		entry += bios->data[bios->offset + 9];
994 	}
995 
996 	return -ENOENT;
997 }
998 
999 static int
1000 parse_bit_table(struct nvbios *bios, const uint16_t bitoffset,
1001 		struct bit_table *table)
1002 {
1003 	struct drm_device *dev = bios->dev;
1004 	struct nouveau_drm *drm = nouveau_drm(dev);
1005 	struct bit_entry bitentry;
1006 
1007 	if (bit_table(dev, table->id, &bitentry) == 0)
1008 		return table->parse_fn(dev, bios, &bitentry);
1009 
1010 	NV_INFO(drm, "BIT table '%c' not found\n", table->id);
1011 	return -ENOSYS;
1012 }
1013 
1014 static int
1015 parse_bit_structure(struct nvbios *bios, const uint16_t bitoffset)
1016 {
1017 	int ret;
1018 
1019 	/*
1020 	 * The only restriction on parsing order currently is having 'i' first
1021 	 * for use of bios->*_version or bios->feature_byte while parsing;
1022 	 * functions shouldn't be actually *doing* anything apart from pulling
1023 	 * data from the image into the bios struct, thus no interdependencies
1024 	 */
1025 	ret = parse_bit_table(bios, bitoffset, &BIT_TABLE('i', i));
1026 	if (ret) /* info? */
1027 		return ret;
1028 	if (bios->major_version >= 0x60) /* g80+ */
1029 		parse_bit_table(bios, bitoffset, &BIT_TABLE('A', A));
1030 	parse_bit_table(bios, bitoffset, &BIT_TABLE('D', display));
1031 	ret = parse_bit_table(bios, bitoffset, &BIT_TABLE('I', init));
1032 	if (ret)
1033 		return ret;
1034 	parse_bit_table(bios, bitoffset, &BIT_TABLE('M', M)); /* memory? */
1035 	parse_bit_table(bios, bitoffset, &BIT_TABLE('L', lvds));
1036 	parse_bit_table(bios, bitoffset, &BIT_TABLE('T', tmds));
1037 
1038 	return 0;
1039 }
1040 
1041 static int parse_bmp_structure(struct drm_device *dev, struct nvbios *bios, unsigned int offset)
1042 {
1043 	/*
1044 	 * Parses the BMP structure for useful things, but does not act on them
1045 	 *
1046 	 * offset +   5: BMP major version
1047 	 * offset +   6: BMP minor version
1048 	 * offset +   9: BMP feature byte
1049 	 * offset +  10: BCD encoded BIOS version
1050 	 *
1051 	 * offset +  18: init script table pointer (for bios versions < 5.10h)
1052 	 * offset +  20: extra init script table pointer (for bios
1053 	 * versions < 5.10h)
1054 	 *
1055 	 * offset +  24: memory init table pointer (used on early bios versions)
1056 	 * offset +  26: SDR memory sequencing setup data table
1057 	 * offset +  28: DDR memory sequencing setup data table
1058 	 *
1059 	 * offset +  54: index of I2C CRTC pair to use for CRT output
1060 	 * offset +  55: index of I2C CRTC pair to use for TV output
1061 	 * offset +  56: index of I2C CRTC pair to use for flat panel output
1062 	 * offset +  58: write CRTC index for I2C pair 0
1063 	 * offset +  59: read CRTC index for I2C pair 0
1064 	 * offset +  60: write CRTC index for I2C pair 1
1065 	 * offset +  61: read CRTC index for I2C pair 1
1066 	 *
1067 	 * offset +  67: maximum internal PLL frequency (single stage PLL)
1068 	 * offset +  71: minimum internal PLL frequency (single stage PLL)
1069 	 *
1070 	 * offset +  75: script table pointers, as described in
1071 	 * parse_script_table_pointers
1072 	 *
1073 	 * offset +  89: TMDS single link output A table pointer
1074 	 * offset +  91: TMDS single link output B table pointer
1075 	 * offset +  95: LVDS single link output A table pointer
1076 	 * offset + 105: flat panel timings table pointer
1077 	 * offset + 107: flat panel strapping translation table pointer
1078 	 * offset + 117: LVDS manufacturer panel config table pointer
1079 	 * offset + 119: LVDS manufacturer strapping translation table pointer
1080 	 *
1081 	 * offset + 142: PLL limits table pointer
1082 	 *
1083 	 * offset + 156: minimum pixel clock for LVDS dual link
1084 	 */
1085 
1086 	struct nouveau_drm *drm = nouveau_drm(dev);
1087 	uint8_t *bmp = &bios->data[offset], bmp_version_major, bmp_version_minor;
1088 	uint16_t bmplength;
1089 	uint16_t legacy_scripts_offset, legacy_i2c_offset;
1090 
1091 	/* load needed defaults in case we can't parse this info */
1092 	bios->digital_min_front_porch = 0x4b;
1093 	bios->fmaxvco = 256000;
1094 	bios->fminvco = 128000;
1095 	bios->fp.duallink_transition_clk = 90000;
1096 
1097 	bmp_version_major = bmp[5];
1098 	bmp_version_minor = bmp[6];
1099 
1100 	NV_INFO(drm, "BMP version %d.%d\n",
1101 		 bmp_version_major, bmp_version_minor);
1102 
1103 	/*
1104 	 * Make sure that 0x36 is blank and can't be mistaken for a DCB
1105 	 * pointer on early versions
1106 	 */
1107 	if (bmp_version_major < 5)
1108 		*(uint16_t *)&bios->data[0x36] = 0;
1109 
1110 	/*
1111 	 * Seems that the minor version was 1 for all major versions prior
1112 	 * to 5. Version 6 could theoretically exist, but I suspect BIT
1113 	 * happened instead.
1114 	 */
1115 	if ((bmp_version_major < 5 && bmp_version_minor != 1) || bmp_version_major > 5) {
1116 		NV_ERROR(drm, "You have an unsupported BMP version. "
1117 				"Please send in your bios\n");
1118 		return -ENOSYS;
1119 	}
1120 
1121 	if (bmp_version_major == 0)
1122 		/* nothing that's currently useful in this version */
1123 		return 0;
1124 	else if (bmp_version_major == 1)
1125 		bmplength = 44; /* exact for 1.01 */
1126 	else if (bmp_version_major == 2)
1127 		bmplength = 48; /* exact for 2.01 */
1128 	else if (bmp_version_major == 3)
1129 		bmplength = 54;
1130 		/* guessed - mem init tables added in this version */
1131 	else if (bmp_version_major == 4 || bmp_version_minor < 0x1)
1132 		/* don't know if 5.0 exists... */
1133 		bmplength = 62;
1134 		/* guessed - BMP I2C indices added in version 4*/
1135 	else if (bmp_version_minor < 0x6)
1136 		bmplength = 67; /* exact for 5.01 */
1137 	else if (bmp_version_minor < 0x10)
1138 		bmplength = 75; /* exact for 5.06 */
1139 	else if (bmp_version_minor == 0x10)
1140 		bmplength = 89; /* exact for 5.10h */
1141 	else if (bmp_version_minor < 0x14)
1142 		bmplength = 118; /* exact for 5.11h */
1143 	else if (bmp_version_minor < 0x24)
1144 		/*
1145 		 * Not sure of version where pll limits came in;
1146 		 * certainly exist by 0x24 though.
1147 		 */
1148 		/* length not exact: this is long enough to get lvds members */
1149 		bmplength = 123;
1150 	else if (bmp_version_minor < 0x27)
1151 		/*
1152 		 * Length not exact: this is long enough to get pll limit
1153 		 * member
1154 		 */
1155 		bmplength = 144;
1156 	else
1157 		/*
1158 		 * Length not exact: this is long enough to get dual link
1159 		 * transition clock.
1160 		 */
1161 		bmplength = 158;
1162 
1163 	/* checksum */
1164 	if (nv_cksum(bmp, 8)) {
1165 		NV_ERROR(drm, "Bad BMP checksum\n");
1166 		return -EINVAL;
1167 	}
1168 
1169 	/*
1170 	 * Bit 4 seems to indicate either a mobile bios or a quadro card --
1171 	 * mobile behaviour consistent (nv11+), quadro only seen nv18gl-nv36gl
1172 	 * (not nv10gl), bit 5 that the flat panel tables are present, and
1173 	 * bit 6 a tv bios.
1174 	 */
1175 	bios->feature_byte = bmp[9];
1176 
1177 	if (bmp_version_major < 5 || bmp_version_minor < 0x10)
1178 		bios->old_style_init = true;
1179 	legacy_scripts_offset = 18;
1180 	if (bmp_version_major < 2)
1181 		legacy_scripts_offset -= 4;
1182 	bios->init_script_tbls_ptr = ROM16(bmp[legacy_scripts_offset]);
1183 	bios->extra_init_script_tbl_ptr = ROM16(bmp[legacy_scripts_offset + 2]);
1184 
1185 	if (bmp_version_major > 2) {	/* appears in BMP 3 */
1186 		bios->legacy.mem_init_tbl_ptr = ROM16(bmp[24]);
1187 		bios->legacy.sdr_seq_tbl_ptr = ROM16(bmp[26]);
1188 		bios->legacy.ddr_seq_tbl_ptr = ROM16(bmp[28]);
1189 	}
1190 
1191 	legacy_i2c_offset = 0x48;	/* BMP version 2 & 3 */
1192 	if (bmplength > 61)
1193 		legacy_i2c_offset = offset + 54;
1194 	bios->legacy.i2c_indices.crt = bios->data[legacy_i2c_offset];
1195 	bios->legacy.i2c_indices.tv = bios->data[legacy_i2c_offset + 1];
1196 	bios->legacy.i2c_indices.panel = bios->data[legacy_i2c_offset + 2];
1197 
1198 	if (bmplength > 74) {
1199 		bios->fmaxvco = ROM32(bmp[67]);
1200 		bios->fminvco = ROM32(bmp[71]);
1201 	}
1202 	if (bmplength > 88)
1203 		parse_script_table_pointers(bios, offset + 75);
1204 	if (bmplength > 94) {
1205 		bios->tmds.output0_script_ptr = ROM16(bmp[89]);
1206 		bios->tmds.output1_script_ptr = ROM16(bmp[91]);
1207 		/*
1208 		 * Never observed in use with lvds scripts, but is reused for
1209 		 * 18/24 bit panel interface default for EDID equipped panels
1210 		 * (if_is_24bit not set directly to avoid any oscillation).
1211 		 */
1212 		bios->legacy.lvds_single_a_script_ptr = ROM16(bmp[95]);
1213 	}
1214 	if (bmplength > 108) {
1215 		bios->fp.fptablepointer = ROM16(bmp[105]);
1216 		bios->fp.fpxlatetableptr = ROM16(bmp[107]);
1217 		bios->fp.xlatwidth = 1;
1218 	}
1219 	if (bmplength > 120) {
1220 		bios->fp.lvdsmanufacturerpointer = ROM16(bmp[117]);
1221 		bios->fp.fpxlatemanufacturertableptr = ROM16(bmp[119]);
1222 	}
1223 #if 0
1224 	if (bmplength > 143)
1225 		bios->pll_limit_tbl_ptr = ROM16(bmp[142]);
1226 #endif
1227 
1228 	if (bmplength > 157)
1229 		bios->fp.duallink_transition_clk = ROM16(bmp[156]) * 10;
1230 
1231 	return 0;
1232 }
1233 
1234 static uint16_t findstr(uint8_t *data, int n, const uint8_t *str, int len)
1235 {
1236 	int i, j;
1237 
1238 	for (i = 0; i <= (n - len); i++) {
1239 		for (j = 0; j < len; j++)
1240 			if (data[i + j] != str[j])
1241 				break;
1242 		if (j == len)
1243 			return i;
1244 	}
1245 
1246 	return 0;
1247 }
1248 
1249 void *
1250 olddcb_table(struct drm_device *dev)
1251 {
1252 	struct nouveau_drm *drm = nouveau_drm(dev);
1253 	u8 *dcb = NULL;
1254 
1255 	if (drm->client.device.info.family > NV_DEVICE_INFO_V0_TNT)
1256 		dcb = ROMPTR(dev, drm->vbios.data[0x36]);
1257 	if (!dcb) {
1258 		NV_WARN(drm, "No DCB data found in VBIOS\n");
1259 		return NULL;
1260 	}
1261 
1262 	if (dcb[0] >= 0x42) {
1263 		NV_WARN(drm, "DCB version 0x%02x unknown\n", dcb[0]);
1264 		return NULL;
1265 	} else
1266 	if (dcb[0] >= 0x30) {
1267 		if (ROM32(dcb[6]) == 0x4edcbdcb)
1268 			return dcb;
1269 	} else
1270 	if (dcb[0] >= 0x20) {
1271 		if (ROM32(dcb[4]) == 0x4edcbdcb)
1272 			return dcb;
1273 	} else
1274 	if (dcb[0] >= 0x15) {
1275 		if (!memcmp(&dcb[-7], "DEV_REC", 7))
1276 			return dcb;
1277 	} else {
1278 		/*
1279 		 * v1.4 (some NV15/16, NV11+) seems the same as v1.5, but
1280 		 * always has the same single (crt) entry, even when tv-out
1281 		 * present, so the conclusion is this version cannot really
1282 		 * be used.
1283 		 *
1284 		 * v1.2 tables (some NV6/10, and NV15+) normally have the
1285 		 * same 5 entries, which are not specific to the card and so
1286 		 * no use.
1287 		 *
1288 		 * v1.2 does have an I2C table that read_dcb_i2c_table can
1289 		 * handle, but cards exist (nv11 in #14821) with a bad i2c
1290 		 * table pointer, so use the indices parsed in
1291 		 * parse_bmp_structure.
1292 		 *
1293 		 * v1.1 (NV5+, maybe some NV4) is entirely unhelpful
1294 		 */
1295 		NV_WARN(drm, "No useful DCB data in VBIOS\n");
1296 		return NULL;
1297 	}
1298 
1299 	NV_WARN(drm, "DCB header validation failed\n");
1300 	return NULL;
1301 }
1302 
1303 void *
1304 olddcb_outp(struct drm_device *dev, u8 idx)
1305 {
1306 	u8 *dcb = olddcb_table(dev);
1307 	if (dcb && dcb[0] >= 0x30) {
1308 		if (idx < dcb[2])
1309 			return dcb + dcb[1] + (idx * dcb[3]);
1310 	} else
1311 	if (dcb && dcb[0] >= 0x20) {
1312 		u8 *i2c = ROMPTR(dev, dcb[2]);
1313 		u8 *ent = dcb + 8 + (idx * 8);
1314 		if (i2c && ent < i2c)
1315 			return ent;
1316 	} else
1317 	if (dcb && dcb[0] >= 0x15) {
1318 		u8 *i2c = ROMPTR(dev, dcb[2]);
1319 		u8 *ent = dcb + 4 + (idx * 10);
1320 		if (i2c && ent < i2c)
1321 			return ent;
1322 	}
1323 
1324 	return NULL;
1325 }
1326 
1327 int
1328 olddcb_outp_foreach(struct drm_device *dev, void *data,
1329 		 int (*exec)(struct drm_device *, void *, int idx, u8 *outp))
1330 {
1331 	int ret, idx = -1;
1332 	u8 *outp = NULL;
1333 	while ((outp = olddcb_outp(dev, ++idx))) {
1334 		if (ROM32(outp[0]) == 0x00000000)
1335 			break; /* seen on an NV11 with DCB v1.5 */
1336 		if (ROM32(outp[0]) == 0xffffffff)
1337 			break; /* seen on an NV17 with DCB v2.0 */
1338 
1339 		if ((outp[0] & 0x0f) == DCB_OUTPUT_UNUSED)
1340 			continue;
1341 		if ((outp[0] & 0x0f) == DCB_OUTPUT_EOL)
1342 			break;
1343 
1344 		ret = exec(dev, data, idx, outp);
1345 		if (ret)
1346 			return ret;
1347 	}
1348 
1349 	return 0;
1350 }
1351 
1352 u8 *
1353 olddcb_conntab(struct drm_device *dev)
1354 {
1355 	u8 *dcb = olddcb_table(dev);
1356 	if (dcb && dcb[0] >= 0x30 && dcb[1] >= 0x16) {
1357 		u8 *conntab = ROMPTR(dev, dcb[0x14]);
1358 		if (conntab && conntab[0] >= 0x30 && conntab[0] <= 0x40)
1359 			return conntab;
1360 	}
1361 	return NULL;
1362 }
1363 
1364 u8 *
1365 olddcb_conn(struct drm_device *dev, u8 idx)
1366 {
1367 	u8 *conntab = olddcb_conntab(dev);
1368 	if (conntab && idx < conntab[2])
1369 		return conntab + conntab[1] + (idx * conntab[3]);
1370 	return NULL;
1371 }
1372 
1373 static struct dcb_output *new_dcb_entry(struct dcb_table *dcb)
1374 {
1375 	struct dcb_output *entry = &dcb->entry[dcb->entries];
1376 
1377 	memset(entry, 0, sizeof(struct dcb_output));
1378 	entry->index = dcb->entries++;
1379 
1380 	return entry;
1381 }
1382 
1383 static void fabricate_dcb_output(struct dcb_table *dcb, int type, int i2c,
1384 				 int heads, int or)
1385 {
1386 	struct dcb_output *entry = new_dcb_entry(dcb);
1387 
1388 	entry->type = type;
1389 	entry->i2c_index = i2c;
1390 	entry->heads = heads;
1391 	if (type != DCB_OUTPUT_ANALOG)
1392 		entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
1393 	entry->or = or;
1394 }
1395 
1396 static bool
1397 parse_dcb20_entry(struct drm_device *dev, struct dcb_table *dcb,
1398 		  uint32_t conn, uint32_t conf, struct dcb_output *entry)
1399 {
1400 	struct nouveau_drm *drm = nouveau_drm(dev);
1401 	int link = 0;
1402 
1403 	entry->type = conn & 0xf;
1404 	entry->i2c_index = (conn >> 4) & 0xf;
1405 	entry->heads = (conn >> 8) & 0xf;
1406 	entry->connector = (conn >> 12) & 0xf;
1407 	entry->bus = (conn >> 16) & 0xf;
1408 	entry->location = (conn >> 20) & 0x3;
1409 	entry->or = (conn >> 24) & 0xf;
1410 
1411 	switch (entry->type) {
1412 	case DCB_OUTPUT_ANALOG:
1413 		/*
1414 		 * Although the rest of a CRT conf dword is usually
1415 		 * zeros, mac biosen have stuff there so we must mask
1416 		 */
1417 		entry->crtconf.maxfreq = (dcb->version < 0x30) ?
1418 					 (conf & 0xffff) * 10 :
1419 					 (conf & 0xff) * 10000;
1420 		break;
1421 	case DCB_OUTPUT_LVDS:
1422 		{
1423 		uint32_t mask;
1424 		if (conf & 0x1)
1425 			entry->lvdsconf.use_straps_for_mode = true;
1426 		if (dcb->version < 0x22) {
1427 			mask = ~0xd;
1428 			/*
1429 			 * The laptop in bug 14567 lies and claims to not use
1430 			 * straps when it does, so assume all DCB 2.0 laptops
1431 			 * use straps, until a broken EDID using one is produced
1432 			 */
1433 			entry->lvdsconf.use_straps_for_mode = true;
1434 			/*
1435 			 * Both 0x4 and 0x8 show up in v2.0 tables; assume they
1436 			 * mean the same thing (probably wrong, but might work)
1437 			 */
1438 			if (conf & 0x4 || conf & 0x8)
1439 				entry->lvdsconf.use_power_scripts = true;
1440 		} else {
1441 			mask = ~0x7;
1442 			if (conf & 0x2)
1443 				entry->lvdsconf.use_acpi_for_edid = true;
1444 			if (conf & 0x4)
1445 				entry->lvdsconf.use_power_scripts = true;
1446 			entry->lvdsconf.sor.link = (conf & 0x00000030) >> 4;
1447 			link = entry->lvdsconf.sor.link;
1448 		}
1449 		if (conf & mask) {
1450 			/*
1451 			 * Until we even try to use these on G8x, it's
1452 			 * useless reporting unknown bits.  They all are.
1453 			 */
1454 			if (dcb->version >= 0x40)
1455 				break;
1456 
1457 			NV_ERROR(drm, "Unknown LVDS configuration bits, "
1458 				      "please report\n");
1459 		}
1460 		break;
1461 		}
1462 	case DCB_OUTPUT_TV:
1463 	{
1464 		if (dcb->version >= 0x30)
1465 			entry->tvconf.has_component_output = conf & (0x8 << 4);
1466 		else
1467 			entry->tvconf.has_component_output = false;
1468 
1469 		break;
1470 	}
1471 	case DCB_OUTPUT_DP:
1472 		entry->dpconf.sor.link = (conf & 0x00000030) >> 4;
1473 		entry->extdev = (conf & 0x0000ff00) >> 8;
1474 		switch ((conf & 0x00e00000) >> 21) {
1475 		case 0:
1476 			entry->dpconf.link_bw = 162000;
1477 			break;
1478 		case 1:
1479 			entry->dpconf.link_bw = 270000;
1480 			break;
1481 		case 2:
1482 			entry->dpconf.link_bw = 540000;
1483 			break;
1484 		case 3:
1485 		default:
1486 			entry->dpconf.link_bw = 810000;
1487 			break;
1488 		}
1489 		switch ((conf & 0x0f000000) >> 24) {
1490 		case 0xf:
1491 		case 0x4:
1492 			entry->dpconf.link_nr = 4;
1493 			break;
1494 		case 0x3:
1495 		case 0x2:
1496 			entry->dpconf.link_nr = 2;
1497 			break;
1498 		default:
1499 			entry->dpconf.link_nr = 1;
1500 			break;
1501 		}
1502 		link = entry->dpconf.sor.link;
1503 		break;
1504 	case DCB_OUTPUT_TMDS:
1505 		if (dcb->version >= 0x40) {
1506 			entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
1507 			entry->extdev = (conf & 0x0000ff00) >> 8;
1508 			link = entry->tmdsconf.sor.link;
1509 		}
1510 		else if (dcb->version >= 0x30)
1511 			entry->tmdsconf.slave_addr = (conf & 0x00000700) >> 8;
1512 		else if (dcb->version >= 0x22)
1513 			entry->tmdsconf.slave_addr = (conf & 0x00000070) >> 4;
1514 		break;
1515 	case DCB_OUTPUT_EOL:
1516 		/* weird g80 mobile type that "nv" treats as a terminator */
1517 		dcb->entries--;
1518 		return false;
1519 	default:
1520 		break;
1521 	}
1522 
1523 	if (dcb->version < 0x40) {
1524 		/* Normal entries consist of a single bit, but dual link has
1525 		 * the next most significant bit set too
1526 		 */
1527 		entry->duallink_possible =
1528 			((1 << (ffs(entry->or) - 1)) * 3 == entry->or);
1529 	} else {
1530 		entry->duallink_possible = (entry->sorconf.link == 3);
1531 	}
1532 
1533 	/* unsure what DCB version introduces this, 3.0? */
1534 	if (conf & 0x100000)
1535 		entry->i2c_upper_default = true;
1536 
1537 	entry->hasht = (entry->extdev << 8) | (entry->location << 4) |
1538 			entry->type;
1539 	entry->hashm = (entry->heads << 8) | (link << 6) | entry->or;
1540 	return true;
1541 }
1542 
1543 static bool
1544 parse_dcb15_entry(struct drm_device *dev, struct dcb_table *dcb,
1545 		  uint32_t conn, uint32_t conf, struct dcb_output *entry)
1546 {
1547 	struct nouveau_drm *drm = nouveau_drm(dev);
1548 
1549 	switch (conn & 0x0000000f) {
1550 	case 0:
1551 		entry->type = DCB_OUTPUT_ANALOG;
1552 		break;
1553 	case 1:
1554 		entry->type = DCB_OUTPUT_TV;
1555 		break;
1556 	case 2:
1557 	case 4:
1558 		if (conn & 0x10)
1559 			entry->type = DCB_OUTPUT_LVDS;
1560 		else
1561 			entry->type = DCB_OUTPUT_TMDS;
1562 		break;
1563 	case 3:
1564 		entry->type = DCB_OUTPUT_LVDS;
1565 		break;
1566 	default:
1567 		NV_ERROR(drm, "Unknown DCB type %d\n", conn & 0x0000000f);
1568 		return false;
1569 	}
1570 
1571 	entry->i2c_index = (conn & 0x0003c000) >> 14;
1572 	entry->heads = ((conn & 0x001c0000) >> 18) + 1;
1573 	entry->or = entry->heads; /* same as heads, hopefully safe enough */
1574 	entry->location = (conn & 0x01e00000) >> 21;
1575 	entry->bus = (conn & 0x0e000000) >> 25;
1576 	entry->duallink_possible = false;
1577 
1578 	switch (entry->type) {
1579 	case DCB_OUTPUT_ANALOG:
1580 		entry->crtconf.maxfreq = (conf & 0xffff) * 10;
1581 		break;
1582 	case DCB_OUTPUT_TV:
1583 		entry->tvconf.has_component_output = false;
1584 		break;
1585 	case DCB_OUTPUT_LVDS:
1586 		if ((conn & 0x00003f00) >> 8 != 0x10)
1587 			entry->lvdsconf.use_straps_for_mode = true;
1588 		entry->lvdsconf.use_power_scripts = true;
1589 		break;
1590 	default:
1591 		break;
1592 	}
1593 
1594 	return true;
1595 }
1596 
1597 static
1598 void merge_like_dcb_entries(struct drm_device *dev, struct dcb_table *dcb)
1599 {
1600 	/*
1601 	 * DCB v2.0 lists each output combination separately.
1602 	 * Here we merge compatible entries to have fewer outputs, with
1603 	 * more options
1604 	 */
1605 
1606 	struct nouveau_drm *drm = nouveau_drm(dev);
1607 	int i, newentries = 0;
1608 
1609 	for (i = 0; i < dcb->entries; i++) {
1610 		struct dcb_output *ient = &dcb->entry[i];
1611 		int j;
1612 
1613 		for (j = i + 1; j < dcb->entries; j++) {
1614 			struct dcb_output *jent = &dcb->entry[j];
1615 
1616 			if (jent->type == 100) /* already merged entry */
1617 				continue;
1618 
1619 			/* merge heads field when all other fields the same */
1620 			if (jent->i2c_index == ient->i2c_index &&
1621 			    jent->type == ient->type &&
1622 			    jent->location == ient->location &&
1623 			    jent->or == ient->or) {
1624 				NV_INFO(drm, "Merging DCB entries %d and %d\n",
1625 					 i, j);
1626 				ient->heads |= jent->heads;
1627 				jent->type = 100; /* dummy value */
1628 			}
1629 		}
1630 	}
1631 
1632 	/* Compact entries merged into others out of dcb */
1633 	for (i = 0; i < dcb->entries; i++) {
1634 		if (dcb->entry[i].type == 100)
1635 			continue;
1636 
1637 		if (newentries != i) {
1638 			dcb->entry[newentries] = dcb->entry[i];
1639 			dcb->entry[newentries].index = newentries;
1640 		}
1641 		newentries++;
1642 	}
1643 
1644 	dcb->entries = newentries;
1645 }
1646 
1647 static bool
1648 apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf)
1649 {
1650 	struct nouveau_drm *drm = nouveau_drm(dev);
1651 	struct dcb_table *dcb = &drm->vbios.dcb;
1652 
1653 	/* Dell Precision M6300
1654 	 *   DCB entry 2: 02025312 00000010
1655 	 *   DCB entry 3: 02026312 00000020
1656 	 *
1657 	 * Identical, except apparently a different connector on a
1658 	 * different SOR link.  Not a clue how we're supposed to know
1659 	 * which one is in use if it even shares an i2c line...
1660 	 *
1661 	 * Ignore the connector on the second SOR link to prevent
1662 	 * nasty problems until this is sorted (assuming it's not a
1663 	 * VBIOS bug).
1664 	 */
1665 	if (nv_match_device(dev, 0x040d, 0x1028, 0x019b)) {
1666 		if (*conn == 0x02026312 && *conf == 0x00000020)
1667 			return false;
1668 	}
1669 
1670 	/* GeForce3 Ti 200
1671 	 *
1672 	 * DCB reports an LVDS output that should be TMDS:
1673 	 *   DCB entry 1: f2005014 ffffffff
1674 	 */
1675 	if (nv_match_device(dev, 0x0201, 0x1462, 0x8851)) {
1676 		if (*conn == 0xf2005014 && *conf == 0xffffffff) {
1677 			fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, 1);
1678 			return false;
1679 		}
1680 	}
1681 
1682 	/* XFX GT-240X-YA
1683 	 *
1684 	 * So many things wrong here, replace the entire encoder table..
1685 	 */
1686 	if (nv_match_device(dev, 0x0ca3, 0x1682, 0x3003)) {
1687 		if (idx == 0) {
1688 			*conn = 0x02001300; /* VGA, connector 1 */
1689 			*conf = 0x00000028;
1690 		} else
1691 		if (idx == 1) {
1692 			*conn = 0x01010312; /* DVI, connector 0 */
1693 			*conf = 0x00020030;
1694 		} else
1695 		if (idx == 2) {
1696 			*conn = 0x01010310; /* VGA, connector 0 */
1697 			*conf = 0x00000028;
1698 		} else
1699 		if (idx == 3) {
1700 			*conn = 0x02022362; /* HDMI, connector 2 */
1701 			*conf = 0x00020010;
1702 		} else {
1703 			*conn = 0x0000000e; /* EOL */
1704 			*conf = 0x00000000;
1705 		}
1706 	}
1707 
1708 	/* Some other twisted XFX board (rhbz#694914)
1709 	 *
1710 	 * The DVI/VGA encoder combo that's supposed to represent the
1711 	 * DVI-I connector actually point at two different ones, and
1712 	 * the HDMI connector ends up paired with the VGA instead.
1713 	 *
1714 	 * Connector table is missing anything for VGA at all, pointing it
1715 	 * an invalid conntab entry 2 so we figure it out ourself.
1716 	 */
1717 	if (nv_match_device(dev, 0x0615, 0x1682, 0x2605)) {
1718 		if (idx == 0) {
1719 			*conn = 0x02002300; /* VGA, connector 2 */
1720 			*conf = 0x00000028;
1721 		} else
1722 		if (idx == 1) {
1723 			*conn = 0x01010312; /* DVI, connector 0 */
1724 			*conf = 0x00020030;
1725 		} else
1726 		if (idx == 2) {
1727 			*conn = 0x04020310; /* VGA, connector 0 */
1728 			*conf = 0x00000028;
1729 		} else
1730 		if (idx == 3) {
1731 			*conn = 0x02021322; /* HDMI, connector 1 */
1732 			*conf = 0x00020010;
1733 		} else {
1734 			*conn = 0x0000000e; /* EOL */
1735 			*conf = 0x00000000;
1736 		}
1737 	}
1738 
1739 	/* fdo#50830: connector indices for VGA and DVI-I are backwards */
1740 	if (nv_match_device(dev, 0x0421, 0x3842, 0xc793)) {
1741 		if (idx == 0 && *conn == 0x02000300)
1742 			*conn = 0x02011300;
1743 		else
1744 		if (idx == 1 && *conn == 0x04011310)
1745 			*conn = 0x04000310;
1746 		else
1747 		if (idx == 2 && *conn == 0x02011312)
1748 			*conn = 0x02000312;
1749 	}
1750 
1751 	return true;
1752 }
1753 
1754 static void
1755 fabricate_dcb_encoder_table(struct drm_device *dev, struct nvbios *bios)
1756 {
1757 	struct dcb_table *dcb = &bios->dcb;
1758 	int all_heads = (nv_two_heads(dev) ? 3 : 1);
1759 
1760 #ifdef __powerpc__
1761 	/* Apple iMac G4 NV17 */
1762 	if (of_machine_is_compatible("PowerMac4,5")) {
1763 		fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, 1);
1764 		fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, 2);
1765 		return;
1766 	}
1767 #endif
1768 
1769 	/* Make up some sane defaults */
1770 	fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG,
1771 			     bios->legacy.i2c_indices.crt, 1, 1);
1772 
1773 	if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
1774 		fabricate_dcb_output(dcb, DCB_OUTPUT_TV,
1775 				     bios->legacy.i2c_indices.tv,
1776 				     all_heads, 0);
1777 
1778 	else if (bios->tmds.output0_script_ptr ||
1779 		 bios->tmds.output1_script_ptr)
1780 		fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS,
1781 				     bios->legacy.i2c_indices.panel,
1782 				     all_heads, 1);
1783 }
1784 
1785 static int
1786 parse_dcb_entry(struct drm_device *dev, void *data, int idx, u8 *outp)
1787 {
1788 	struct nouveau_drm *drm = nouveau_drm(dev);
1789 	struct dcb_table *dcb = &drm->vbios.dcb;
1790 	u32 conf = (dcb->version >= 0x20) ? ROM32(outp[4]) : ROM32(outp[6]);
1791 	u32 conn = ROM32(outp[0]);
1792 	bool ret;
1793 
1794 	if (apply_dcb_encoder_quirks(dev, idx, &conn, &conf)) {
1795 		struct dcb_output *entry = new_dcb_entry(dcb);
1796 
1797 		NV_INFO(drm, "DCB outp %02d: %08x %08x\n", idx, conn, conf);
1798 
1799 		if (dcb->version >= 0x20)
1800 			ret = parse_dcb20_entry(dev, dcb, conn, conf, entry);
1801 		else
1802 			ret = parse_dcb15_entry(dev, dcb, conn, conf, entry);
1803 		if (!ret)
1804 			return 1; /* stop parsing */
1805 
1806 		/* Ignore the I2C index for on-chip TV-out, as there
1807 		 * are cards with bogus values (nv31m in bug 23212),
1808 		 * and it's otherwise useless.
1809 		 */
1810 		if (entry->type == DCB_OUTPUT_TV &&
1811 		    entry->location == DCB_LOC_ON_CHIP)
1812 			entry->i2c_index = 0x0f;
1813 	}
1814 
1815 	return 0;
1816 }
1817 
1818 static void
1819 dcb_fake_connectors(struct nvbios *bios)
1820 {
1821 	struct dcb_table *dcbt = &bios->dcb;
1822 	u8 map[16] = { };
1823 	int i, idx = 0;
1824 
1825 	/* heuristic: if we ever get a non-zero connector field, assume
1826 	 * that all the indices are valid and we don't need fake them.
1827 	 *
1828 	 * and, as usual, a blacklist of boards with bad bios data..
1829 	 */
1830 	if (!nv_match_device(bios->dev, 0x0392, 0x107d, 0x20a2)) {
1831 		for (i = 0; i < dcbt->entries; i++) {
1832 			if (dcbt->entry[i].connector)
1833 				return;
1834 		}
1835 	}
1836 
1837 	/* no useful connector info available, we need to make it up
1838 	 * ourselves.  the rule here is: anything on the same i2c bus
1839 	 * is considered to be on the same connector.  any output
1840 	 * without an associated i2c bus is assigned its own unique
1841 	 * connector index.
1842 	 */
1843 	for (i = 0; i < dcbt->entries; i++) {
1844 		u8 i2c = dcbt->entry[i].i2c_index;
1845 		if (i2c == 0x0f) {
1846 			dcbt->entry[i].connector = idx++;
1847 		} else {
1848 			if (!map[i2c])
1849 				map[i2c] = ++idx;
1850 			dcbt->entry[i].connector = map[i2c] - 1;
1851 		}
1852 	}
1853 
1854 	/* if we created more than one connector, destroy the connector
1855 	 * table - just in case it has random, rather than stub, entries.
1856 	 */
1857 	if (i > 1) {
1858 		u8 *conntab = olddcb_conntab(bios->dev);
1859 		if (conntab)
1860 			conntab[0] = 0x00;
1861 	}
1862 }
1863 
1864 static int
1865 parse_dcb_table(struct drm_device *dev, struct nvbios *bios)
1866 {
1867 	struct nouveau_drm *drm = nouveau_drm(dev);
1868 	struct dcb_table *dcb = &bios->dcb;
1869 	u8 *dcbt, *conn;
1870 	int idx;
1871 
1872 	dcbt = olddcb_table(dev);
1873 	if (!dcbt) {
1874 		/* handle pre-DCB boards */
1875 		if (bios->type == NVBIOS_BMP) {
1876 			fabricate_dcb_encoder_table(dev, bios);
1877 			return 0;
1878 		}
1879 
1880 		return -EINVAL;
1881 	}
1882 
1883 	NV_INFO(drm, "DCB version %d.%d\n", dcbt[0] >> 4, dcbt[0] & 0xf);
1884 
1885 	dcb->version = dcbt[0];
1886 	olddcb_outp_foreach(dev, NULL, parse_dcb_entry);
1887 
1888 	/*
1889 	 * apart for v2.1+ not being known for requiring merging, this
1890 	 * guarantees dcbent->index is the index of the entry in the rom image
1891 	 */
1892 	if (dcb->version < 0x21)
1893 		merge_like_dcb_entries(dev, dcb);
1894 
1895 	/* dump connector table entries to log, if any exist */
1896 	idx = -1;
1897 	while ((conn = olddcb_conn(dev, ++idx))) {
1898 		if (conn[0] != 0xff) {
1899 			if (olddcb_conntab(dev)[3] < 4)
1900 				NV_INFO(drm, "DCB conn %02d: %04x\n",
1901 					idx, ROM16(conn[0]));
1902 			else
1903 				NV_INFO(drm, "DCB conn %02d: %08x\n",
1904 					idx, ROM32(conn[0]));
1905 		}
1906 	}
1907 	dcb_fake_connectors(bios);
1908 	return 0;
1909 }
1910 
1911 static int load_nv17_hwsq_ucode_entry(struct drm_device *dev, struct nvbios *bios, uint16_t hwsq_offset, int entry)
1912 {
1913 	/*
1914 	 * The header following the "HWSQ" signature has the number of entries,
1915 	 * and the entry size
1916 	 *
1917 	 * An entry consists of a dword to write to the sequencer control reg
1918 	 * (0x00001304), followed by the ucode bytes, written sequentially,
1919 	 * starting at reg 0x00001400
1920 	 */
1921 
1922 	struct nouveau_drm *drm = nouveau_drm(dev);
1923 	struct nvif_object *device = &drm->client.device.object;
1924 	uint8_t bytes_to_write;
1925 	uint16_t hwsq_entry_offset;
1926 	int i;
1927 
1928 	if (bios->data[hwsq_offset] <= entry) {
1929 		NV_ERROR(drm, "Too few entries in HW sequencer table for "
1930 				"requested entry\n");
1931 		return -ENOENT;
1932 	}
1933 
1934 	bytes_to_write = bios->data[hwsq_offset + 1];
1935 
1936 	if (bytes_to_write != 36) {
1937 		NV_ERROR(drm, "Unknown HW sequencer entry size\n");
1938 		return -EINVAL;
1939 	}
1940 
1941 	NV_INFO(drm, "Loading NV17 power sequencing microcode\n");
1942 
1943 	hwsq_entry_offset = hwsq_offset + 2 + entry * bytes_to_write;
1944 
1945 	/* set sequencer control */
1946 	nvif_wr32(device, 0x00001304, ROM32(bios->data[hwsq_entry_offset]));
1947 	bytes_to_write -= 4;
1948 
1949 	/* write ucode */
1950 	for (i = 0; i < bytes_to_write; i += 4)
1951 		nvif_wr32(device, 0x00001400 + i, ROM32(bios->data[hwsq_entry_offset + i + 4]));
1952 
1953 	/* twiddle NV_PBUS_DEBUG_4 */
1954 	nvif_wr32(device, NV_PBUS_DEBUG_4, nvif_rd32(device, NV_PBUS_DEBUG_4) | 0x18);
1955 
1956 	return 0;
1957 }
1958 
1959 static int load_nv17_hw_sequencer_ucode(struct drm_device *dev,
1960 					struct nvbios *bios)
1961 {
1962 	/*
1963 	 * BMP based cards, from NV17, need a microcode loading to correctly
1964 	 * control the GPIO etc for LVDS panels
1965 	 *
1966 	 * BIT based cards seem to do this directly in the init scripts
1967 	 *
1968 	 * The microcode entries are found by the "HWSQ" signature.
1969 	 */
1970 
1971 	static const uint8_t hwsq_signature[] = { 'H', 'W', 'S', 'Q' };
1972 	const int sz = sizeof(hwsq_signature);
1973 	int hwsq_offset;
1974 
1975 	hwsq_offset = findstr(bios->data, bios->length, hwsq_signature, sz);
1976 	if (!hwsq_offset)
1977 		return 0;
1978 
1979 	/* always use entry 0? */
1980 	return load_nv17_hwsq_ucode_entry(dev, bios, hwsq_offset + sz, 0);
1981 }
1982 
1983 uint8_t *nouveau_bios_embedded_edid(struct drm_device *dev)
1984 {
1985 	struct nouveau_drm *drm = nouveau_drm(dev);
1986 	struct nvbios *bios = &drm->vbios;
1987 	static const uint8_t edid_sig[] = {
1988 			0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
1989 	uint16_t offset = 0;
1990 	uint16_t newoffset;
1991 	int searchlen = NV_PROM_SIZE;
1992 
1993 	if (bios->fp.edid)
1994 		return bios->fp.edid;
1995 
1996 	while (searchlen) {
1997 		newoffset = findstr(&bios->data[offset], searchlen,
1998 								edid_sig, 8);
1999 		if (!newoffset)
2000 			return NULL;
2001 		offset += newoffset;
2002 		if (!nv_cksum(&bios->data[offset], EDID1_LEN))
2003 			break;
2004 
2005 		searchlen -= offset;
2006 		offset++;
2007 	}
2008 
2009 	NV_INFO(drm, "Found EDID in BIOS\n");
2010 
2011 	return bios->fp.edid = &bios->data[offset];
2012 }
2013 
2014 static bool NVInitVBIOS(struct drm_device *dev)
2015 {
2016 	struct nouveau_drm *drm = nouveau_drm(dev);
2017 	struct nvkm_bios *bios = nvxx_bios(&drm->client.device);
2018 	struct nvbios *legacy = &drm->vbios;
2019 
2020 	memset(legacy, 0, sizeof(struct nvbios));
2021 	spin_lock_init(&legacy->lock);
2022 	legacy->dev = dev;
2023 
2024 	legacy->data = bios->data;
2025 	legacy->length = bios->size;
2026 	legacy->major_version = bios->version.major;
2027 	legacy->chip_version = bios->version.chip;
2028 	if (bios->bit_offset) {
2029 		legacy->type = NVBIOS_BIT;
2030 		legacy->offset = bios->bit_offset;
2031 		return !parse_bit_structure(legacy, legacy->offset + 6);
2032 	} else
2033 	if (bios->bmp_offset) {
2034 		legacy->type = NVBIOS_BMP;
2035 		legacy->offset = bios->bmp_offset;
2036 		return !parse_bmp_structure(dev, legacy, legacy->offset);
2037 	}
2038 
2039 	return false;
2040 }
2041 
2042 int
2043 nouveau_run_vbios_init(struct drm_device *dev)
2044 {
2045 	struct nouveau_drm *drm = nouveau_drm(dev);
2046 	struct nvbios *bios = &drm->vbios;
2047 	int ret = 0;
2048 
2049 	/* Reset the BIOS head to 0. */
2050 	bios->state.crtchead = 0;
2051 
2052 	if (bios->major_version < 5)	/* BMP only */
2053 		load_nv17_hw_sequencer_ucode(dev, bios);
2054 
2055 	if (bios->execute) {
2056 		bios->fp.last_script_invoc = 0;
2057 		bios->fp.lvds_init_run = false;
2058 	}
2059 
2060 	return ret;
2061 }
2062 
2063 static bool
2064 nouveau_bios_posted(struct drm_device *dev)
2065 {
2066 	struct nouveau_drm *drm = nouveau_drm(dev);
2067 	unsigned htotal;
2068 
2069 	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_TESLA)
2070 		return true;
2071 
2072 	htotal  = NVReadVgaCrtc(dev, 0, 0x06);
2073 	htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x01) << 8;
2074 	htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x20) << 4;
2075 	htotal |= (NVReadVgaCrtc(dev, 0, 0x25) & 0x01) << 10;
2076 	htotal |= (NVReadVgaCrtc(dev, 0, 0x41) & 0x01) << 11;
2077 	return (htotal != 0);
2078 }
2079 
2080 int
2081 nouveau_bios_init(struct drm_device *dev)
2082 {
2083 	struct nouveau_drm *drm = nouveau_drm(dev);
2084 	struct nvbios *bios = &drm->vbios;
2085 	int ret;
2086 
2087 	/* only relevant for PCI devices */
2088 	if (!dev->pdev)
2089 		return 0;
2090 
2091 	if (!NVInitVBIOS(dev))
2092 		return -ENODEV;
2093 
2094 	ret = parse_dcb_table(dev, bios);
2095 	if (ret)
2096 		return ret;
2097 
2098 	if (!bios->major_version)	/* we don't run version 0 bios */
2099 		return 0;
2100 
2101 	/* init script execution disabled */
2102 	bios->execute = false;
2103 
2104 	/* ... unless card isn't POSTed already */
2105 	if (!nouveau_bios_posted(dev)) {
2106 		NV_INFO(drm, "Adaptor not initialised, "
2107 			"running VBIOS init tables.\n");
2108 		bios->execute = true;
2109 	}
2110 
2111 	ret = nouveau_run_vbios_init(dev);
2112 	if (ret)
2113 		return ret;
2114 
2115 	/* feature_byte on BMP is poor, but init always sets CR4B */
2116 	if (bios->major_version < 5)
2117 		bios->is_mobile = NVReadVgaCrtc(dev, 0, NV_CIO_CRE_4B) & 0x40;
2118 
2119 	/* all BIT systems need p_f_m_t for digital_min_front_porch */
2120 	if (bios->is_mobile || bios->major_version >= 5)
2121 		ret = parse_fp_mode_table(dev, bios);
2122 
2123 	/* allow subsequent scripts to execute */
2124 	bios->execute = true;
2125 
2126 	return 0;
2127 }
2128 
2129 void
2130 nouveau_bios_takedown(struct drm_device *dev)
2131 {
2132 }
2133