1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. 4 * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. 5 */ 6 7 #ifndef _DPU_HW_INTF_H 8 #define _DPU_HW_INTF_H 9 10 #include "dpu_hw_catalog.h" 11 #include "dpu_hw_mdss.h" 12 #include "dpu_hw_util.h" 13 14 struct dpu_hw_intf; 15 16 /* intf timing settings */ 17 struct dpu_hw_intf_timing_params { 18 u32 width; /* active width */ 19 u32 height; /* active height */ 20 u32 xres; /* Display panel width */ 21 u32 yres; /* Display panel height */ 22 23 u32 h_back_porch; 24 u32 h_front_porch; 25 u32 v_back_porch; 26 u32 v_front_porch; 27 u32 hsync_pulse_width; 28 u32 vsync_pulse_width; 29 u32 hsync_polarity; 30 u32 vsync_polarity; 31 u32 border_clr; 32 u32 underflow_clr; 33 u32 hsync_skew; 34 35 bool wide_bus_en; 36 }; 37 38 struct dpu_hw_intf_prog_fetch { 39 u8 enable; 40 /* vsync counter for the front porch pixel line */ 41 u32 fetch_start; 42 }; 43 44 struct dpu_hw_intf_status { 45 u8 is_en; /* interface timing engine is enabled or not */ 46 u8 is_prog_fetch_en; /* interface prog fetch counter is enabled or not */ 47 u32 frame_count; /* frame count since timing engine enabled */ 48 u32 line_count; /* current line count including blanking */ 49 }; 50 51 struct dpu_hw_intf_cmd_mode_cfg { 52 u8 data_compress; /* enable data compress between dpu and dsi */ 53 u8 wide_bus_en; /* enable databus widen mode */ 54 }; 55 56 /** 57 * struct dpu_hw_intf_ops : Interface to the interface Hw driver functions 58 * Assumption is these functions will be called after clocks are enabled 59 * @ setup_timing_gen : programs the timing engine 60 * @ setup_prog_fetch : enables/disables the programmable fetch logic 61 * @ enable_timing: enable/disable timing engine 62 * @ get_status: returns if timing engine is enabled or not 63 * @ get_line_count: reads current vertical line counter 64 * @bind_pingpong_blk: enable/disable the connection with pingpong which will 65 * feed pixels to this interface 66 * @setup_misr: enable/disable MISR 67 * @collect_misr: read MISR signature 68 * @enable_tearcheck: Enables vsync generation and sets up init value of read 69 * pointer and programs the tear check configuration 70 * @disable_tearcheck: Disables tearcheck block 71 * @connect_external_te: Read, modify, write to either set or clear listening to external TE 72 * Return: 1 if TE was originally connected, 0 if not, or -ERROR 73 * @get_vsync_info: Provides the programmed and current line_count 74 * @setup_autorefresh: Configure and enable the autorefresh config 75 * @get_autorefresh: Retrieve autorefresh config from hardware 76 * Return: 0 on success, -ETIMEDOUT on timeout 77 * @vsync_sel: Select vsync signal for tear-effect configuration 78 * @program_intf_cmd_cfg: Program the DPU to interface datapath for command mode 79 */ 80 struct dpu_hw_intf_ops { 81 void (*setup_timing_gen)(struct dpu_hw_intf *intf, 82 const struct dpu_hw_intf_timing_params *p, 83 const struct dpu_format *fmt); 84 85 void (*setup_prg_fetch)(struct dpu_hw_intf *intf, 86 const struct dpu_hw_intf_prog_fetch *fetch); 87 88 void (*enable_timing)(struct dpu_hw_intf *intf, 89 u8 enable); 90 91 void (*get_status)(struct dpu_hw_intf *intf, 92 struct dpu_hw_intf_status *status); 93 94 u32 (*get_line_count)(struct dpu_hw_intf *intf); 95 96 void (*bind_pingpong_blk)(struct dpu_hw_intf *intf, 97 const enum dpu_pingpong pp); 98 void (*setup_misr)(struct dpu_hw_intf *intf); 99 int (*collect_misr)(struct dpu_hw_intf *intf, u32 *misr_value); 100 101 // Tearcheck on INTF since DPU 5.0.0 102 103 int (*enable_tearcheck)(struct dpu_hw_intf *intf, struct dpu_hw_tear_check *cfg); 104 105 int (*disable_tearcheck)(struct dpu_hw_intf *intf); 106 107 int (*connect_external_te)(struct dpu_hw_intf *intf, bool enable_external_te); 108 109 void (*vsync_sel)(struct dpu_hw_intf *intf, u32 vsync_source); 110 111 /** 112 * Disable autorefresh if enabled 113 */ 114 void (*disable_autorefresh)(struct dpu_hw_intf *intf, uint32_t encoder_id, u16 vdisplay); 115 116 void (*program_intf_cmd_cfg)(struct dpu_hw_intf *intf, 117 struct dpu_hw_intf_cmd_mode_cfg *cmd_mode_cfg); 118 }; 119 120 struct dpu_hw_intf { 121 struct dpu_hw_blk_reg_map hw; 122 123 /* intf */ 124 enum dpu_intf idx; 125 const struct dpu_intf_cfg *cap; 126 127 /* ops */ 128 struct dpu_hw_intf_ops ops; 129 }; 130 131 /** 132 * dpu_hw_intf_init() - Initializes the INTF driver for the passed 133 * interface catalog entry. 134 * @dev: Corresponding device for devres management 135 * @cfg: interface catalog entry for which driver object is required 136 * @addr: mapped register io address of MDP 137 * @mdss_rev: dpu core's major and minor versions 138 */ 139 struct dpu_hw_intf *dpu_hw_intf_init(struct drm_device *dev, 140 const struct dpu_intf_cfg *cfg, 141 void __iomem *addr, 142 const struct dpu_mdss_version *mdss_rev); 143 144 #endif /*_DPU_HW_INTF_H */ 145