xref: /linux/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h (revision 170aafe35cb98e0f3fbacb446ea86389fbce22ea)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
4  * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
5  */
6 
7 #ifndef _DPU_HW_INTF_H
8 #define _DPU_HW_INTF_H
9 
10 #include "dpu_hw_catalog.h"
11 #include "dpu_hw_mdss.h"
12 #include "dpu_hw_util.h"
13 
14 struct dpu_hw_intf;
15 
16 /* intf timing settings */
17 struct dpu_hw_intf_timing_params {
18 	u32 width;		/* active width */
19 	u32 height;		/* active height */
20 	u32 xres;		/* Display panel width */
21 	u32 yres;		/* Display panel height */
22 
23 	u32 h_back_porch;
24 	u32 h_front_porch;
25 	u32 v_back_porch;
26 	u32 v_front_porch;
27 	u32 hsync_pulse_width;
28 	u32 vsync_pulse_width;
29 	u32 hsync_polarity;
30 	u32 vsync_polarity;
31 	u32 border_clr;
32 	u32 underflow_clr;
33 	u32 hsync_skew;
34 
35 	bool wide_bus_en;
36 	bool compression_en;
37 };
38 
39 struct dpu_hw_intf_prog_fetch {
40 	u8 enable;
41 	/* vsync counter for the front porch pixel line */
42 	u32 fetch_start;
43 };
44 
45 struct dpu_hw_intf_status {
46 	u8 is_en;		/* interface timing engine is enabled or not */
47 	u8 is_prog_fetch_en;	/* interface prog fetch counter is enabled or not */
48 	u32 frame_count;	/* frame count since timing engine enabled */
49 	u32 line_count;		/* current line count including blanking */
50 };
51 
52 struct dpu_hw_intf_cmd_mode_cfg {
53 	u8 data_compress;	/* enable data compress between dpu and dsi */
54 	u8 wide_bus_en;		/* enable databus widen mode */
55 };
56 
57 /**
58  * struct dpu_hw_intf_ops : Interface to the interface Hw driver functions
59  *  Assumption is these functions will be called after clocks are enabled
60  * @ setup_timing_gen : programs the timing engine
61  * @ setup_prog_fetch : enables/disables the programmable fetch logic
62  * @ enable_timing: enable/disable timing engine
63  * @ get_status: returns if timing engine is enabled or not
64  * @ get_line_count: reads current vertical line counter
65  * @bind_pingpong_blk: enable/disable the connection with pingpong which will
66  *                     feed pixels to this interface
67  * @setup_misr: enable/disable MISR
68  * @collect_misr: read MISR signature
69  * @enable_tearcheck:           Enables vsync generation and sets up init value of read
70  *                              pointer and programs the tear check configuration
71  * @disable_tearcheck:          Disables tearcheck block
72  * @connect_external_te:        Read, modify, write to either set or clear listening to external TE
73  *                              Return: 1 if TE was originally connected, 0 if not, or -ERROR
74  * @get_vsync_info:             Provides the programmed and current line_count
75  * @setup_autorefresh:          Configure and enable the autorefresh config
76  * @get_autorefresh:            Retrieve autorefresh config from hardware
77  *                              Return: 0 on success, -ETIMEDOUT on timeout
78  * @vsync_sel:                  Select vsync signal for tear-effect configuration
79  * @program_intf_cmd_cfg:       Program the DPU to interface datapath for command mode
80  */
81 struct dpu_hw_intf_ops {
82 	void (*setup_timing_gen)(struct dpu_hw_intf *intf,
83 			const struct dpu_hw_intf_timing_params *p,
84 			const struct msm_format *fmt,
85 			const struct dpu_mdss_version *mdss_ver);
86 
87 	void (*setup_prg_fetch)(struct dpu_hw_intf *intf,
88 			const struct dpu_hw_intf_prog_fetch *fetch);
89 
90 	void (*enable_timing)(struct dpu_hw_intf *intf,
91 			u8 enable);
92 
93 	void (*get_status)(struct dpu_hw_intf *intf,
94 			struct dpu_hw_intf_status *status);
95 
96 	u32 (*get_line_count)(struct dpu_hw_intf *intf);
97 
98 	void (*bind_pingpong_blk)(struct dpu_hw_intf *intf,
99 			const enum dpu_pingpong pp);
100 	void (*setup_misr)(struct dpu_hw_intf *intf);
101 	int (*collect_misr)(struct dpu_hw_intf *intf, u32 *misr_value);
102 
103 	// Tearcheck on INTF since DPU 5.0.0
104 
105 	int (*enable_tearcheck)(struct dpu_hw_intf *intf, struct dpu_hw_tear_check *cfg);
106 
107 	int (*disable_tearcheck)(struct dpu_hw_intf *intf);
108 
109 	int (*connect_external_te)(struct dpu_hw_intf *intf, bool enable_external_te);
110 
111 	void (*vsync_sel)(struct dpu_hw_intf *intf, enum dpu_vsync_source vsync_source);
112 
113 	/**
114 	 * Disable autorefresh if enabled
115 	 */
116 	void (*disable_autorefresh)(struct dpu_hw_intf *intf, uint32_t encoder_id, u16 vdisplay);
117 
118 	void (*program_intf_cmd_cfg)(struct dpu_hw_intf *intf,
119 				     struct dpu_hw_intf_cmd_mode_cfg *cmd_mode_cfg);
120 };
121 
122 struct dpu_hw_intf {
123 	struct dpu_hw_blk_reg_map hw;
124 
125 	/* intf */
126 	enum dpu_intf idx;
127 	const struct dpu_intf_cfg *cap;
128 
129 	/* ops */
130 	struct dpu_hw_intf_ops ops;
131 };
132 
133 /**
134  * dpu_hw_intf_init() - Initializes the INTF driver for the passed
135  * interface catalog entry.
136  * @dev:  Corresponding device for devres management
137  * @cfg:  interface catalog entry for which driver object is required
138  * @addr: mapped register io address of MDP
139  * @mdss_rev: dpu core's major and minor versions
140  */
141 struct dpu_hw_intf *dpu_hw_intf_init(struct drm_device *dev,
142 				     const struct dpu_intf_cfg *cfg,
143 				     void __iomem *addr,
144 				     const struct dpu_mdss_version *mdss_rev);
145 
146 #endif /*_DPU_HW_INTF_H */
147