xref: /linux/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h (revision f898c16a0624e7f2dcb0b1cda6916c9be6489197)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
4  * Copyright (c) 2015-2018 The Linux Foundation. All rights reserved.
5  */
6 
7 #ifndef __DPU_ENCODER_PHYS_H__
8 #define __DPU_ENCODER_PHYS_H__
9 
10 #include <drm/drm_writeback.h>
11 #include <linux/jiffies.h>
12 
13 #include "dpu_kms.h"
14 #include "dpu_hw_intf.h"
15 #include "dpu_hw_wb.h"
16 #include "dpu_hw_pingpong.h"
17 #include "dpu_hw_cdm.h"
18 #include "dpu_hw_ctl.h"
19 #include "dpu_hw_top.h"
20 #include "dpu_hw_util.h"
21 #include "dpu_encoder.h"
22 #include "dpu_crtc.h"
23 
24 #define DPU_ENCODER_NAME_MAX	16
25 
26 /* wait for at most 2 vsync for lowest refresh rate (24hz) */
27 #define KICKOFF_TIMEOUT_MS		84
28 #define KICKOFF_TIMEOUT_JIFFIES		msecs_to_jiffies(KICKOFF_TIMEOUT_MS)
29 
30 /**
31  * enum dpu_enc_split_role - Role this physical encoder will play in a
32  *	split-panel configuration, where one panel is master, and others slaves.
33  *	Masters have extra responsibilities, like managing the VBLANK IRQ.
34  * @ENC_ROLE_SOLO:	This is the one and only panel. This encoder is master.
35  * @ENC_ROLE_MASTER:	This encoder is the master of a split panel config.
36  * @ENC_ROLE_SLAVE:	This encoder is not the master of a split panel config.
37  */
38 enum dpu_enc_split_role {
39 	ENC_ROLE_SOLO,
40 	ENC_ROLE_MASTER,
41 	ENC_ROLE_SLAVE,
42 };
43 
44 /**
45  * enum dpu_enc_enable_state - current enabled state of the physical encoder
46  * @DPU_ENC_DISABLING:	Encoder transitioning to disable state
47  *			Events bounding transition are encoder type specific
48  * @DPU_ENC_DISABLED:	Encoder is disabled
49  * @DPU_ENC_ENABLING:	Encoder transitioning to enabled
50  *			Events bounding transition are encoder type specific
51  * @DPU_ENC_ENABLED:	Encoder is enabled
52  * @DPU_ENC_ERR_NEEDS_HW_RESET:	Encoder is enabled, but requires a hw_reset
53  *				to recover from a previous error
54  */
55 enum dpu_enc_enable_state {
56 	DPU_ENC_DISABLING,
57 	DPU_ENC_DISABLED,
58 	DPU_ENC_ENABLING,
59 	DPU_ENC_ENABLED,
60 	DPU_ENC_ERR_NEEDS_HW_RESET
61 };
62 
63 struct dpu_encoder_phys;
64 
65 /**
66  * struct dpu_encoder_phys_ops - Interface the physical encoders provide to
67  *	the containing virtual encoder.
68  * @prepare_commit:		MSM Atomic Call, start of atomic commit sequence
69  * @is_master:			Whether this phys_enc is the current master
70  *				encoder. Can be switched at enable time. Based
71  *				on split_role and current mode (CMD/VID).
72  * @enable:			DRM Call. Enable a DRM mode.
73  * @disable:			DRM Call. Disable mode.
74  * @control_vblank_irq		Register/Deregister for VBLANK IRQ
75  * @wait_for_commit_done:	Wait for hardware to have flushed the
76  *				current pending frames to hardware
77  * @wait_for_tx_complete:	Wait for hardware to transfer the pixels
78  *				to the panel
79  * @wait_for_vblank:		Wait for VBLANK, for sub-driver internal use
80  * @prepare_for_kickoff:	Do any work necessary prior to a kickoff
81  *				For CMD encoder, may wait for previous tx done
82  * @handle_post_kickoff:	Do any work necessary post-kickoff work
83  * @trigger_start:		Process start event on physical encoder
84  * @needs_single_flush:		Whether encoder slaves need to be flushed
85  * @irq_enable:			Handler to enable all the encoder IRQs
86  * @irq_disable:		Handler to disable all the encoder IRQs
87  * @prepare_idle_pc:		phys encoder can update the vsync_enable status
88  *                              on idle power collapse prepare
89  * @restore:			Restore all the encoder configs.
90  * @get_line_count:		Obtain current vertical line count
91  */
92 
93 struct dpu_encoder_phys_ops {
94 	void (*prepare_commit)(struct dpu_encoder_phys *encoder);
95 	bool (*is_master)(struct dpu_encoder_phys *encoder);
96 	void (*enable)(struct dpu_encoder_phys *encoder);
97 	void (*disable)(struct dpu_encoder_phys *encoder);
98 	int (*control_vblank_irq)(struct dpu_encoder_phys *enc, bool enable);
99 	int (*wait_for_commit_done)(struct dpu_encoder_phys *phys_enc);
100 	int (*wait_for_tx_complete)(struct dpu_encoder_phys *phys_enc);
101 	void (*prepare_for_kickoff)(struct dpu_encoder_phys *phys_enc);
102 	void (*handle_post_kickoff)(struct dpu_encoder_phys *phys_enc);
103 	void (*trigger_start)(struct dpu_encoder_phys *phys_enc);
104 	bool (*needs_single_flush)(struct dpu_encoder_phys *phys_enc);
105 	void (*irq_enable)(struct dpu_encoder_phys *phys);
106 	void (*irq_disable)(struct dpu_encoder_phys *phys);
107 	void (*prepare_idle_pc)(struct dpu_encoder_phys *phys_enc);
108 	void (*restore)(struct dpu_encoder_phys *phys);
109 	int (*get_line_count)(struct dpu_encoder_phys *phys);
110 	int (*get_frame_count)(struct dpu_encoder_phys *phys);
111 	void (*prepare_wb_job)(struct dpu_encoder_phys *phys_enc,
112 			struct drm_writeback_job *job);
113 	void (*cleanup_wb_job)(struct dpu_encoder_phys *phys_enc,
114 			struct drm_writeback_job *job);
115 	bool (*is_valid_for_commit)(struct dpu_encoder_phys *phys_enc);
116 };
117 
118 /**
119  * enum dpu_intr_idx - dpu encoder interrupt index
120  * @INTR_IDX_VSYNC:    Vsync interrupt for video mode panel
121  * @INTR_IDX_PINGPONG: Pingpong done interrupt for cmd mode panel
122  * @INTR_IDX_UNDERRUN: Underrun interrupt for video and cmd mode panel
123  * @INTR_IDX_RDPTR:    Readpointer done interrupt for cmd mode panel
124  * @INTR_IDX_WB_DONE:  Writeback done interrupt for virtual connector
125  */
126 enum dpu_intr_idx {
127 	INTR_IDX_VSYNC,
128 	INTR_IDX_PINGPONG,
129 	INTR_IDX_UNDERRUN,
130 	INTR_IDX_CTL_START,
131 	INTR_IDX_RDPTR,
132 	INTR_IDX_WB_DONE,
133 	INTR_IDX_MAX,
134 };
135 
136 /**
137  * struct dpu_encoder_phys - physical encoder that drives a single INTF block
138  *	tied to a specific panel / sub-panel. Abstract type, sub-classed by
139  *	phys_vid or phys_cmd for video mode or command mode encs respectively.
140  * @parent:		Pointer to the containing virtual encoder
141  * @ops:		Operations exposed to the virtual encoder
142  * @parent_ops:		Callbacks exposed by the parent to the phys_enc
143  * @hw_mdptop:		Hardware interface to the top registers
144  * @hw_ctl:		Hardware interface to the ctl registers
145  * @hw_pp:		Hardware interface to the ping pong registers
146  * @hw_intf:		Hardware interface to the intf registers
147  * @hw_wb:		Hardware interface to the wb registers
148  * @hw_cdm:		Hardware interface to the CDM registers
149  * @dpu_kms:		Pointer to the dpu_kms top level
150  * @cdm_cfg:		CDM block config needed to store WB/DP block's CDM configuration
151  * @cached_mode:	DRM mode cached at mode_set time, acted on in enable
152  * @vblank_ctl_lock:	Vblank ctl mutex lock to protect vblank_refcount
153  * @enabled:		Whether the encoder has enabled and running a mode
154  * @split_role:		Role to play in a split-panel configuration
155  * @intf_mode:		Interface mode
156  * @enc_spinlock:	Virtual-Encoder-Wide Spin Lock for IRQ purposes
157  * @enable_state:	Enable state tracking
158  * @vblank_refcount:	Reference count of vblank request
159  * @vsync_cnt:		Vsync count for the physical encoder
160  * @underrun_cnt:	Underrun count for the physical encoder
161  * @pending_kickoff_cnt:	Atomic counter tracking the number of kickoffs
162  *				vs. the number of done/vblank irqs. Should hover
163  *				between 0-2 Incremented when a new kickoff is
164  *				scheduled. Decremented in irq handler
165  * @pending_ctlstart_cnt:	Atomic counter tracking the number of ctl start
166  *                              pending.
167  * @pending_kickoff_wq:		Wait queue for blocking until kickoff completes
168  * @irq:			IRQ indices
169  * @has_intf_te:		Interface TE configuration support
170  */
171 struct dpu_encoder_phys {
172 	struct drm_encoder *parent;
173 	struct dpu_encoder_phys_ops ops;
174 	struct dpu_hw_mdp *hw_mdptop;
175 	struct dpu_hw_ctl *hw_ctl;
176 	struct dpu_hw_pingpong *hw_pp;
177 	struct dpu_hw_intf *hw_intf;
178 	struct dpu_hw_wb *hw_wb;
179 	struct dpu_hw_cdm *hw_cdm;
180 	struct dpu_kms *dpu_kms;
181 	struct dpu_hw_cdm_cfg cdm_cfg;
182 	struct drm_display_mode cached_mode;
183 	struct mutex vblank_ctl_lock;
184 	enum dpu_enc_split_role split_role;
185 	enum dpu_intf_mode intf_mode;
186 	spinlock_t *enc_spinlock;
187 	enum dpu_enc_enable_state enable_state;
188 	int vblank_refcount;
189 	atomic_t vsync_cnt;
190 	atomic_t underrun_cnt;
191 	atomic_t pending_ctlstart_cnt;
192 	atomic_t pending_kickoff_cnt;
193 	wait_queue_head_t pending_kickoff_wq;
194 	unsigned int irq[INTR_IDX_MAX];
195 	bool has_intf_te;
196 };
197 
198 static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys)
199 {
200 	atomic_inc_return(&phys->pending_ctlstart_cnt);
201 	return atomic_inc_return(&phys->pending_kickoff_cnt);
202 }
203 
204 /**
205  * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to handle command
206  *	mode specific operations
207  * @base:	Baseclass physical encoder structure
208  * @wbirq_refcount:     Reference count of writeback interrupt
209  * @wb_done_timeout_cnt: number of wb done irq timeout errors
210  * @wb_cfg:  writeback block config to store fb related details
211  * @wb_conn: backpointer to writeback connector
212  * @wb_job: backpointer to current writeback job
213  * @dest:   dpu buffer layout for current writeback output buffer
214  */
215 struct dpu_encoder_phys_wb {
216 	struct dpu_encoder_phys base;
217 	atomic_t wbirq_refcount;
218 	int wb_done_timeout_cnt;
219 	struct dpu_hw_wb_cfg wb_cfg;
220 	struct drm_writeback_connector *wb_conn;
221 	struct drm_writeback_job *wb_job;
222 	struct dpu_hw_fmt_layout dest;
223 };
224 
225 /**
226  * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command
227  *	mode specific operations
228  * @base:	Baseclass physical encoder structure
229  * @intf_idx:	Intf Block index used by this phys encoder
230  * @stream_sel:	Stream selection for multi-stream interfaces
231  * @serialize_wait4pp:	serialize wait4pp feature waits for pp_done interrupt
232  *			after ctl_start instead of before next frame kickoff
233  * @pp_timeout_report_cnt: number of pingpong done irq timeout errors
234  * @pending_vblank_cnt: Atomic counter tracking pending wait for VBLANK
235  * @pending_vblank_wq: Wait queue for blocking until VBLANK received
236  */
237 struct dpu_encoder_phys_cmd {
238 	struct dpu_encoder_phys base;
239 	int stream_sel;
240 	bool serialize_wait4pp;
241 	int pp_timeout_report_cnt;
242 	atomic_t pending_vblank_cnt;
243 	wait_queue_head_t pending_vblank_wq;
244 };
245 
246 /**
247  * struct dpu_enc_phys_init_params - initialization parameters for phys encs
248  * @dpu_kms:		Pointer to the dpu_kms top level
249  * @parent:		Pointer to the containing virtual encoder
250  * @parent_ops:		Callbacks exposed by the parent to the phys_enc
251  * @split_role:		Role to play in a split-panel configuration
252  * @hw_intf:		Hardware interface to the intf registers
253  * @hw_wb:		Hardware interface to the wb registers
254  * @enc_spinlock:	Virtual-Encoder-Wide Spin Lock for IRQ purposes
255  */
256 struct dpu_enc_phys_init_params {
257 	struct dpu_kms *dpu_kms;
258 	struct drm_encoder *parent;
259 	enum dpu_enc_split_role split_role;
260 	struct dpu_hw_intf *hw_intf;
261 	struct dpu_hw_wb *hw_wb;
262 	spinlock_t *enc_spinlock;
263 };
264 
265 /**
266  * dpu_encoder_wait_info - container for passing arguments to irq wait functions
267  * @wq: wait queue structure
268  * @atomic_cnt: wait until atomic_cnt equals zero
269  * @timeout_ms: timeout value in milliseconds
270  */
271 struct dpu_encoder_wait_info {
272 	wait_queue_head_t *wq;
273 	atomic_t *atomic_cnt;
274 	s64 timeout_ms;
275 };
276 
277 /**
278  * dpu_encoder_phys_vid_init - Construct a new video mode physical encoder
279  * @p:	Pointer to init params structure
280  * Return: Error code or newly allocated encoder
281  */
282 struct dpu_encoder_phys *dpu_encoder_phys_vid_init(struct drm_device *dev,
283 		struct dpu_enc_phys_init_params *p);
284 
285 /**
286  * dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder
287  * @dev:  Corresponding device for devres management
288  * @p:	Pointer to init params structure
289  * Return: Error code or newly allocated encoder
290  */
291 struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(struct drm_device *dev,
292 		struct dpu_enc_phys_init_params *p);
293 
294 /**
295  * dpu_encoder_phys_wb_init - initialize writeback encoder
296  * @dev:  Corresponding device for devres management
297  * @init:	Pointer to init info structure with initialization params
298  */
299 struct dpu_encoder_phys *dpu_encoder_phys_wb_init(struct drm_device *dev,
300 		struct dpu_enc_phys_init_params *p);
301 
302 /**
303  * dpu_encoder_helper_trigger_start - control start helper function
304  *	This helper function may be optionally specified by physical
305  *	encoders if they require ctl_start triggering.
306  * @phys_enc: Pointer to physical encoder structure
307  */
308 void dpu_encoder_helper_trigger_start(struct dpu_encoder_phys *phys_enc);
309 
310 static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
311 		struct dpu_encoder_phys *phys_enc)
312 {
313 	struct dpu_crtc_state *dpu_cstate;
314 
315 	if (!phys_enc || phys_enc->enable_state == DPU_ENC_DISABLING)
316 		return BLEND_3D_NONE;
317 
318 	dpu_cstate = to_dpu_crtc_state(phys_enc->parent->crtc->state);
319 
320 	/* Use merge_3d unless DSC MERGE topology is used */
321 	if (phys_enc->split_role == ENC_ROLE_SOLO &&
322 	    dpu_cstate->num_mixers == CRTC_DUAL_MIXERS &&
323 	    !dpu_encoder_use_dsc_merge(phys_enc->parent))
324 		return BLEND_3D_H_ROW_INT;
325 
326 	return BLEND_3D_NONE;
327 }
328 
329 /**
330  * dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder
331  *   This helper function is used by physical encoder to get DSC blocks mask
332  *   used for this encoder.
333  * @phys_enc: Pointer to physical encoder structure
334  */
335 unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc);
336 
337 /**
338  * dpu_encoder_get_drm_fmt - return DRM fourcc format
339  * @phys_enc: Pointer to physical encoder structure
340  */
341 u32 dpu_encoder_get_drm_fmt(struct dpu_encoder_phys *phys_enc);
342 
343 /**
344  * dpu_encoder_needs_periph_flush - return true if physical encoder requires
345  *	peripheral flush
346  * @phys_enc: Pointer to physical encoder structure
347  */
348 bool dpu_encoder_needs_periph_flush(struct dpu_encoder_phys *phys_enc);
349 
350 /**
351  * dpu_encoder_helper_split_config - split display configuration helper function
352  *	This helper function may be used by physical encoders to configure
353  *	the split display related registers.
354  * @phys_enc: Pointer to physical encoder structure
355  * @interface: enum dpu_intf setting
356  */
357 void dpu_encoder_helper_split_config(
358 		struct dpu_encoder_phys *phys_enc,
359 		enum dpu_intf interface);
360 
361 /**
362  * dpu_encoder_helper_report_irq_timeout - utility to report error that irq has
363  *	timed out, including reporting frame error event to crtc and debug dump
364  * @phys_enc: Pointer to physical encoder structure
365  * @intr_idx: Failing interrupt index
366  */
367 void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys *phys_enc,
368 		enum dpu_intr_idx intr_idx);
369 
370 /**
371  * dpu_encoder_helper_wait_for_irq - utility to wait on an irq.
372  *	note: will call dpu_encoder_helper_wait_for_irq on timeout
373  * @phys_enc: Pointer to physical encoder structure
374  * @irq: IRQ index
375  * @func: IRQ callback to be called in case of timeout
376  * @wait_info: wait info struct
377  * @Return: 0 or -ERROR
378  */
379 int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc,
380 		unsigned int irq,
381 		void (*func)(void *arg),
382 		struct dpu_encoder_wait_info *wait_info);
383 
384 /**
385  * dpu_encoder_helper_phys_cleanup - helper to cleanup dpu pipeline
386  * @phys_enc: Pointer to physical encoder structure
387  */
388 void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc);
389 
390 /**
391  * dpu_encoder_helper_phys_setup_cdm - setup chroma down sampling block
392  * @phys_enc: Pointer to physical encoder
393  * @output_type: HDMI/WB
394  */
395 void dpu_encoder_helper_phys_setup_cdm(struct dpu_encoder_phys *phys_enc,
396 				       const struct msm_format *dpu_fmt,
397 				       u32 output_type);
398 
399 /**
400  * dpu_encoder_vblank_callback - Notify virtual encoder of vblank IRQ reception
401  * @drm_enc:    Pointer to drm encoder structure
402  * @phys_enc:	Pointer to physical encoder
403  * Note: This is called from IRQ handler context.
404  */
405 void dpu_encoder_vblank_callback(struct drm_encoder *drm_enc,
406 				 struct dpu_encoder_phys *phy_enc);
407 
408 /** dpu_encoder_underrun_callback - Notify virtual encoder of underrun IRQ reception
409  * @drm_enc:    Pointer to drm encoder structure
410  * @phys_enc:	Pointer to physical encoder
411  * Note: This is called from IRQ handler context.
412  */
413 void dpu_encoder_underrun_callback(struct drm_encoder *drm_enc,
414 				   struct dpu_encoder_phys *phy_enc);
415 
416 /** dpu_encoder_frame_done_callback -- Notify virtual encoder that this phys encoder completes last request frame
417  * @drm_enc:    Pointer to drm encoder structure
418  * @phys_enc:	Pointer to physical encoder
419  * @event:	Event to process
420  */
421 void dpu_encoder_frame_done_callback(
422 		struct drm_encoder *drm_enc,
423 		struct dpu_encoder_phys *ready_phys, u32 event);
424 
425 void dpu_encoder_phys_init(struct dpu_encoder_phys *phys,
426 			   struct dpu_enc_phys_init_params *p);
427 
428 #endif /* __dpu_encoder_phys_H__ */
429