1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. 4 * Copyright (c) 2015-2018 The Linux Foundation. All rights reserved. 5 */ 6 7 #ifndef __DPU_ENCODER_PHYS_H__ 8 #define __DPU_ENCODER_PHYS_H__ 9 10 #include <drm/drm_writeback.h> 11 #include <linux/jiffies.h> 12 13 #include "dpu_kms.h" 14 #include "dpu_hw_intf.h" 15 #include "dpu_hw_wb.h" 16 #include "dpu_hw_pingpong.h" 17 #include "dpu_hw_ctl.h" 18 #include "dpu_hw_top.h" 19 #include "dpu_encoder.h" 20 #include "dpu_crtc.h" 21 22 #define DPU_ENCODER_NAME_MAX 16 23 24 /* wait for at most 2 vsync for lowest refresh rate (24hz) */ 25 #define KICKOFF_TIMEOUT_MS 84 26 #define KICKOFF_TIMEOUT_JIFFIES msecs_to_jiffies(KICKOFF_TIMEOUT_MS) 27 28 /** 29 * enum dpu_enc_split_role - Role this physical encoder will play in a 30 * split-panel configuration, where one panel is master, and others slaves. 31 * Masters have extra responsibilities, like managing the VBLANK IRQ. 32 * @ENC_ROLE_SOLO: This is the one and only panel. This encoder is master. 33 * @ENC_ROLE_MASTER: This encoder is the master of a split panel config. 34 * @ENC_ROLE_SLAVE: This encoder is not the master of a split panel config. 35 */ 36 enum dpu_enc_split_role { 37 ENC_ROLE_SOLO, 38 ENC_ROLE_MASTER, 39 ENC_ROLE_SLAVE, 40 }; 41 42 /** 43 * enum dpu_enc_enable_state - current enabled state of the physical encoder 44 * @DPU_ENC_DISABLING: Encoder transitioning to disable state 45 * Events bounding transition are encoder type specific 46 * @DPU_ENC_DISABLED: Encoder is disabled 47 * @DPU_ENC_ENABLING: Encoder transitioning to enabled 48 * Events bounding transition are encoder type specific 49 * @DPU_ENC_ENABLED: Encoder is enabled 50 * @DPU_ENC_ERR_NEEDS_HW_RESET: Encoder is enabled, but requires a hw_reset 51 * to recover from a previous error 52 */ 53 enum dpu_enc_enable_state { 54 DPU_ENC_DISABLING, 55 DPU_ENC_DISABLED, 56 DPU_ENC_ENABLING, 57 DPU_ENC_ENABLED, 58 DPU_ENC_ERR_NEEDS_HW_RESET 59 }; 60 61 struct dpu_encoder_phys; 62 63 /** 64 * struct dpu_encoder_phys_ops - Interface the physical encoders provide to 65 * the containing virtual encoder. 66 * @prepare_commit: MSM Atomic Call, start of atomic commit sequence 67 * @is_master: Whether this phys_enc is the current master 68 * encoder. Can be switched at enable time. Based 69 * on split_role and current mode (CMD/VID). 70 * @atomic_mode_set: DRM Call. Set a DRM mode. 71 * This likely caches the mode, for use at enable. 72 * @enable: DRM Call. Enable a DRM mode. 73 * @disable: DRM Call. Disable mode. 74 * @atomic_check: DRM Call. Atomic check new DRM state. 75 * @destroy: DRM Call. Destroy and release resources. 76 * @control_vblank_irq Register/Deregister for VBLANK IRQ 77 * @wait_for_commit_done: Wait for hardware to have flushed the 78 * current pending frames to hardware 79 * @wait_for_tx_complete: Wait for hardware to transfer the pixels 80 * to the panel 81 * @wait_for_vblank: Wait for VBLANK, for sub-driver internal use 82 * @prepare_for_kickoff: Do any work necessary prior to a kickoff 83 * For CMD encoder, may wait for previous tx done 84 * @handle_post_kickoff: Do any work necessary post-kickoff work 85 * @trigger_start: Process start event on physical encoder 86 * @needs_single_flush: Whether encoder slaves need to be flushed 87 * @irq_control: Handler to enable/disable all the encoder IRQs 88 * @prepare_idle_pc: phys encoder can update the vsync_enable status 89 * on idle power collapse prepare 90 * @restore: Restore all the encoder configs. 91 * @get_line_count: Obtain current vertical line count 92 */ 93 94 struct dpu_encoder_phys_ops { 95 void (*prepare_commit)(struct dpu_encoder_phys *encoder); 96 bool (*is_master)(struct dpu_encoder_phys *encoder); 97 void (*atomic_mode_set)(struct dpu_encoder_phys *encoder, 98 struct drm_crtc_state *crtc_state, 99 struct drm_connector_state *conn_state); 100 void (*enable)(struct dpu_encoder_phys *encoder); 101 void (*disable)(struct dpu_encoder_phys *encoder); 102 int (*atomic_check)(struct dpu_encoder_phys *encoder, 103 struct drm_crtc_state *crtc_state, 104 struct drm_connector_state *conn_state); 105 void (*destroy)(struct dpu_encoder_phys *encoder); 106 int (*control_vblank_irq)(struct dpu_encoder_phys *enc, bool enable); 107 int (*wait_for_commit_done)(struct dpu_encoder_phys *phys_enc); 108 int (*wait_for_tx_complete)(struct dpu_encoder_phys *phys_enc); 109 int (*wait_for_vblank)(struct dpu_encoder_phys *phys_enc); 110 void (*prepare_for_kickoff)(struct dpu_encoder_phys *phys_enc); 111 void (*handle_post_kickoff)(struct dpu_encoder_phys *phys_enc); 112 void (*trigger_start)(struct dpu_encoder_phys *phys_enc); 113 bool (*needs_single_flush)(struct dpu_encoder_phys *phys_enc); 114 void (*irq_control)(struct dpu_encoder_phys *phys, bool enable); 115 void (*prepare_idle_pc)(struct dpu_encoder_phys *phys_enc); 116 void (*restore)(struct dpu_encoder_phys *phys); 117 int (*get_line_count)(struct dpu_encoder_phys *phys); 118 int (*get_frame_count)(struct dpu_encoder_phys *phys); 119 void (*prepare_wb_job)(struct dpu_encoder_phys *phys_enc, 120 struct drm_writeback_job *job); 121 void (*cleanup_wb_job)(struct dpu_encoder_phys *phys_enc, 122 struct drm_writeback_job *job); 123 bool (*is_valid_for_commit)(struct dpu_encoder_phys *phys_enc); 124 }; 125 126 /** 127 * enum dpu_intr_idx - dpu encoder interrupt index 128 * @INTR_IDX_VSYNC: Vsync interrupt for video mode panel 129 * @INTR_IDX_PINGPONG: Pingpong done interrupt for cmd mode panel 130 * @INTR_IDX_UNDERRUN: Underrun interrupt for video and cmd mode panel 131 * @INTR_IDX_RDPTR: Readpointer done interrupt for cmd mode panel 132 * @INTR_IDX_WB_DONE: Writeback done interrupt for virtual connector 133 */ 134 enum dpu_intr_idx { 135 INTR_IDX_VSYNC, 136 INTR_IDX_PINGPONG, 137 INTR_IDX_UNDERRUN, 138 INTR_IDX_CTL_START, 139 INTR_IDX_RDPTR, 140 INTR_IDX_WB_DONE, 141 INTR_IDX_MAX, 142 }; 143 144 /** 145 * struct dpu_encoder_phys - physical encoder that drives a single INTF block 146 * tied to a specific panel / sub-panel. Abstract type, sub-classed by 147 * phys_vid or phys_cmd for video mode or command mode encs respectively. 148 * @parent: Pointer to the containing virtual encoder 149 * @ops: Operations exposed to the virtual encoder 150 * @parent_ops: Callbacks exposed by the parent to the phys_enc 151 * @hw_mdptop: Hardware interface to the top registers 152 * @hw_ctl: Hardware interface to the ctl registers 153 * @hw_pp: Hardware interface to the ping pong registers 154 * @hw_intf: Hardware interface to the intf registers 155 * @hw_wb: Hardware interface to the wb registers 156 * @dpu_kms: Pointer to the dpu_kms top level 157 * @cached_mode: DRM mode cached at mode_set time, acted on in enable 158 * @enabled: Whether the encoder has enabled and running a mode 159 * @split_role: Role to play in a split-panel configuration 160 * @intf_mode: Interface mode 161 * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes 162 * @enable_state: Enable state tracking 163 * @vblank_refcount: Reference count of vblank request 164 * @vsync_cnt: Vsync count for the physical encoder 165 * @underrun_cnt: Underrun count for the physical encoder 166 * @pending_kickoff_cnt: Atomic counter tracking the number of kickoffs 167 * vs. the number of done/vblank irqs. Should hover 168 * between 0-2 Incremented when a new kickoff is 169 * scheduled. Decremented in irq handler 170 * @pending_ctlstart_cnt: Atomic counter tracking the number of ctl start 171 * pending. 172 * @pending_kickoff_wq: Wait queue for blocking until kickoff completes 173 * @irq: IRQ indices 174 * @has_intf_te: Interface TE configuration support 175 */ 176 struct dpu_encoder_phys { 177 struct drm_encoder *parent; 178 struct dpu_encoder_phys_ops ops; 179 struct dpu_hw_mdp *hw_mdptop; 180 struct dpu_hw_ctl *hw_ctl; 181 struct dpu_hw_pingpong *hw_pp; 182 struct dpu_hw_intf *hw_intf; 183 struct dpu_hw_wb *hw_wb; 184 struct dpu_kms *dpu_kms; 185 struct drm_display_mode cached_mode; 186 enum dpu_enc_split_role split_role; 187 enum dpu_intf_mode intf_mode; 188 spinlock_t *enc_spinlock; 189 enum dpu_enc_enable_state enable_state; 190 atomic_t vblank_refcount; 191 atomic_t vsync_cnt; 192 atomic_t underrun_cnt; 193 atomic_t pending_ctlstart_cnt; 194 atomic_t pending_kickoff_cnt; 195 wait_queue_head_t pending_kickoff_wq; 196 int irq[INTR_IDX_MAX]; 197 bool has_intf_te; 198 }; 199 200 static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) 201 { 202 atomic_inc_return(&phys->pending_ctlstart_cnt); 203 return atomic_inc_return(&phys->pending_kickoff_cnt); 204 } 205 206 /** 207 * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to handle command 208 * mode specific operations 209 * @base: Baseclass physical encoder structure 210 * @wbirq_refcount: Reference count of writeback interrupt 211 * @wb_done_timeout_cnt: number of wb done irq timeout errors 212 * @wb_cfg: writeback block config to store fb related details 213 * @wb_conn: backpointer to writeback connector 214 * @wb_job: backpointer to current writeback job 215 * @dest: dpu buffer layout for current writeback output buffer 216 */ 217 struct dpu_encoder_phys_wb { 218 struct dpu_encoder_phys base; 219 atomic_t wbirq_refcount; 220 int wb_done_timeout_cnt; 221 struct dpu_hw_wb_cfg wb_cfg; 222 struct drm_writeback_connector *wb_conn; 223 struct drm_writeback_job *wb_job; 224 struct dpu_hw_fmt_layout dest; 225 }; 226 227 /** 228 * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command 229 * mode specific operations 230 * @base: Baseclass physical encoder structure 231 * @intf_idx: Intf Block index used by this phys encoder 232 * @stream_sel: Stream selection for multi-stream interfaces 233 * @serialize_wait4pp: serialize wait4pp feature waits for pp_done interrupt 234 * after ctl_start instead of before next frame kickoff 235 * @pp_timeout_report_cnt: number of pingpong done irq timeout errors 236 * @pending_vblank_cnt: Atomic counter tracking pending wait for VBLANK 237 * @pending_vblank_wq: Wait queue for blocking until VBLANK received 238 */ 239 struct dpu_encoder_phys_cmd { 240 struct dpu_encoder_phys base; 241 int stream_sel; 242 bool serialize_wait4pp; 243 int pp_timeout_report_cnt; 244 atomic_t pending_vblank_cnt; 245 wait_queue_head_t pending_vblank_wq; 246 }; 247 248 /** 249 * struct dpu_enc_phys_init_params - initialization parameters for phys encs 250 * @dpu_kms: Pointer to the dpu_kms top level 251 * @parent: Pointer to the containing virtual encoder 252 * @parent_ops: Callbacks exposed by the parent to the phys_enc 253 * @split_role: Role to play in a split-panel configuration 254 * @hw_intf: Hardware interface to the intf registers 255 * @hw_wb: Hardware interface to the wb registers 256 * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes 257 */ 258 struct dpu_enc_phys_init_params { 259 struct dpu_kms *dpu_kms; 260 struct drm_encoder *parent; 261 enum dpu_enc_split_role split_role; 262 struct dpu_hw_intf *hw_intf; 263 struct dpu_hw_wb *hw_wb; 264 spinlock_t *enc_spinlock; 265 }; 266 267 /** 268 * dpu_encoder_wait_info - container for passing arguments to irq wait functions 269 * @wq: wait queue structure 270 * @atomic_cnt: wait until atomic_cnt equals zero 271 * @timeout_ms: timeout value in milliseconds 272 */ 273 struct dpu_encoder_wait_info { 274 wait_queue_head_t *wq; 275 atomic_t *atomic_cnt; 276 s64 timeout_ms; 277 }; 278 279 /** 280 * dpu_encoder_phys_vid_init - Construct a new video mode physical encoder 281 * @p: Pointer to init params structure 282 * Return: Error code or newly allocated encoder 283 */ 284 struct dpu_encoder_phys *dpu_encoder_phys_vid_init( 285 struct dpu_enc_phys_init_params *p); 286 287 /** 288 * dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder 289 * @p: Pointer to init params structure 290 * Return: Error code or newly allocated encoder 291 */ 292 struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( 293 struct dpu_enc_phys_init_params *p); 294 295 /** 296 * dpu_encoder_phys_wb_init - initialize writeback encoder 297 * @init: Pointer to init info structure with initialization params 298 */ 299 struct dpu_encoder_phys *dpu_encoder_phys_wb_init( 300 struct dpu_enc_phys_init_params *p); 301 302 /** 303 * dpu_encoder_helper_trigger_start - control start helper function 304 * This helper function may be optionally specified by physical 305 * encoders if they require ctl_start triggering. 306 * @phys_enc: Pointer to physical encoder structure 307 */ 308 void dpu_encoder_helper_trigger_start(struct dpu_encoder_phys *phys_enc); 309 310 static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode( 311 struct dpu_encoder_phys *phys_enc) 312 { 313 struct dpu_crtc_state *dpu_cstate; 314 315 if (!phys_enc || phys_enc->enable_state == DPU_ENC_DISABLING) 316 return BLEND_3D_NONE; 317 318 dpu_cstate = to_dpu_crtc_state(phys_enc->parent->crtc->state); 319 320 /* Use merge_3d unless DSC MERGE topology is used */ 321 if (phys_enc->split_role == ENC_ROLE_SOLO && 322 dpu_cstate->num_mixers == CRTC_DUAL_MIXERS && 323 !dpu_encoder_use_dsc_merge(phys_enc->parent)) 324 return BLEND_3D_H_ROW_INT; 325 326 return BLEND_3D_NONE; 327 } 328 329 /** 330 * dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder 331 * This helper function is used by physical encoder to get DSC blocks mask 332 * used for this encoder. 333 * @phys_enc: Pointer to physical encoder structure 334 */ 335 unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc); 336 337 /** 338 * dpu_encoder_helper_split_config - split display configuration helper function 339 * This helper function may be used by physical encoders to configure 340 * the split display related registers. 341 * @phys_enc: Pointer to physical encoder structure 342 * @interface: enum dpu_intf setting 343 */ 344 void dpu_encoder_helper_split_config( 345 struct dpu_encoder_phys *phys_enc, 346 enum dpu_intf interface); 347 348 /** 349 * dpu_encoder_helper_report_irq_timeout - utility to report error that irq has 350 * timed out, including reporting frame error event to crtc and debug dump 351 * @phys_enc: Pointer to physical encoder structure 352 * @intr_idx: Failing interrupt index 353 */ 354 void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys *phys_enc, 355 enum dpu_intr_idx intr_idx); 356 357 /** 358 * dpu_encoder_helper_wait_for_irq - utility to wait on an irq. 359 * note: will call dpu_encoder_helper_wait_for_irq on timeout 360 * @phys_enc: Pointer to physical encoder structure 361 * @irq: IRQ index 362 * @func: IRQ callback to be called in case of timeout 363 * @wait_info: wait info struct 364 * @Return: 0 or -ERROR 365 */ 366 int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, 367 int irq, 368 void (*func)(void *arg, int irq_idx), 369 struct dpu_encoder_wait_info *wait_info); 370 371 /** 372 * dpu_encoder_helper_phys_cleanup - helper to cleanup dpu pipeline 373 * @phys_enc: Pointer to physical encoder structure 374 */ 375 void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc); 376 377 /** 378 * dpu_encoder_vblank_callback - Notify virtual encoder of vblank IRQ reception 379 * @drm_enc: Pointer to drm encoder structure 380 * @phys_enc: Pointer to physical encoder 381 * Note: This is called from IRQ handler context. 382 */ 383 void dpu_encoder_vblank_callback(struct drm_encoder *drm_enc, 384 struct dpu_encoder_phys *phy_enc); 385 386 /** dpu_encoder_underrun_callback - Notify virtual encoder of underrun IRQ reception 387 * @drm_enc: Pointer to drm encoder structure 388 * @phys_enc: Pointer to physical encoder 389 * Note: This is called from IRQ handler context. 390 */ 391 void dpu_encoder_underrun_callback(struct drm_encoder *drm_enc, 392 struct dpu_encoder_phys *phy_enc); 393 394 /** dpu_encoder_frame_done_callback -- Notify virtual encoder that this phys encoder completes last request frame 395 * @drm_enc: Pointer to drm encoder structure 396 * @phys_enc: Pointer to physical encoder 397 * @event: Event to process 398 */ 399 void dpu_encoder_frame_done_callback( 400 struct drm_encoder *drm_enc, 401 struct dpu_encoder_phys *ready_phys, u32 event); 402 403 void dpu_encoder_phys_init(struct dpu_encoder_phys *phys, 404 struct dpu_enc_phys_init_params *p); 405 406 #endif /* __dpu_encoder_phys_H__ */ 407