1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright © 2018-2020 Intel Corporation
4 */
5
6 #include <linux/clk.h>
7 #include <linux/module.h>
8 #include <linux/of_graph.h>
9 #include <linux/of_platform.h>
10 #include <linux/of_reserved_mem.h>
11 #include <linux/mfd/syscon.h>
12 #include <linux/platform_device.h>
13 #include <linux/pm_runtime.h>
14 #include <linux/regmap.h>
15
16 #include <drm/drm_atomic_helper.h>
17 #include <drm/drm_drv.h>
18 #include <drm/drm_fbdev_dma.h>
19 #include <drm/drm_gem_dma_helper.h>
20 #include <drm/drm_gem_framebuffer_helper.h>
21 #include <drm/drm_module.h>
22 #include <drm/drm_probe_helper.h>
23 #include <drm/drm_vblank.h>
24
25 #include "kmb_drv.h"
26 #include "kmb_dsi.h"
27 #include "kmb_regs.h"
28
kmb_display_clk_enable(struct kmb_drm_private * kmb)29 static int kmb_display_clk_enable(struct kmb_drm_private *kmb)
30 {
31 int ret = 0;
32
33 ret = clk_prepare_enable(kmb->kmb_clk.clk_lcd);
34 if (ret) {
35 drm_err(&kmb->drm, "Failed to enable LCD clock: %d\n", ret);
36 return ret;
37 }
38 DRM_INFO("SUCCESS : enabled LCD clocks\n");
39 return 0;
40 }
41
kmb_initialize_clocks(struct kmb_drm_private * kmb,struct device * dev)42 static int kmb_initialize_clocks(struct kmb_drm_private *kmb, struct device *dev)
43 {
44 int ret = 0;
45 struct regmap *msscam;
46
47 kmb->kmb_clk.clk_lcd = devm_clk_get(dev, "clk_lcd");
48 if (IS_ERR(kmb->kmb_clk.clk_lcd)) {
49 drm_err(&kmb->drm, "clk_get() failed clk_lcd\n");
50 return PTR_ERR(kmb->kmb_clk.clk_lcd);
51 }
52
53 kmb->kmb_clk.clk_pll0 = devm_clk_get(dev, "clk_pll0");
54 if (IS_ERR(kmb->kmb_clk.clk_pll0)) {
55 drm_err(&kmb->drm, "clk_get() failed clk_pll0 ");
56 return PTR_ERR(kmb->kmb_clk.clk_pll0);
57 }
58 kmb->sys_clk_mhz = clk_get_rate(kmb->kmb_clk.clk_pll0) / 1000000;
59 drm_info(&kmb->drm, "system clk = %d Mhz", kmb->sys_clk_mhz);
60
61 ret = kmb_dsi_clk_init(kmb->kmb_dsi);
62
63 /* Set LCD clock to 200 Mhz */
64 clk_set_rate(kmb->kmb_clk.clk_lcd, KMB_LCD_DEFAULT_CLK);
65 if (clk_get_rate(kmb->kmb_clk.clk_lcd) != KMB_LCD_DEFAULT_CLK) {
66 drm_err(&kmb->drm, "failed to set to clk_lcd to %d\n",
67 KMB_LCD_DEFAULT_CLK);
68 return -1;
69 }
70 drm_dbg(&kmb->drm, "clk_lcd = %ld\n", clk_get_rate(kmb->kmb_clk.clk_lcd));
71
72 ret = kmb_display_clk_enable(kmb);
73 if (ret)
74 return ret;
75
76 msscam = syscon_regmap_lookup_by_compatible("intel,keembay-msscam");
77 if (IS_ERR(msscam)) {
78 drm_err(&kmb->drm, "failed to get msscam syscon");
79 return -1;
80 }
81
82 /* Enable MSS_CAM_CLK_CTRL for MIPI TX and LCD */
83 regmap_update_bits(msscam, MSS_CAM_CLK_CTRL, 0x1fff, 0x1fff);
84 regmap_update_bits(msscam, MSS_CAM_RSTN_CTRL, 0xffffffff, 0xffffffff);
85 return 0;
86 }
87
kmb_display_clk_disable(struct kmb_drm_private * kmb)88 static void kmb_display_clk_disable(struct kmb_drm_private *kmb)
89 {
90 clk_disable_unprepare(kmb->kmb_clk.clk_lcd);
91 }
92
kmb_map_mmio(struct drm_device * drm,struct platform_device * pdev,char * name)93 static void __iomem *kmb_map_mmio(struct drm_device *drm,
94 struct platform_device *pdev,
95 char *name)
96 {
97 struct resource *res;
98 void __iomem *mem;
99
100 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
101 if (!res) {
102 drm_err(drm, "failed to get resource for %s", name);
103 return ERR_PTR(-ENOMEM);
104 }
105 mem = devm_ioremap_resource(drm->dev, res);
106 if (IS_ERR(mem))
107 drm_err(drm, "failed to ioremap %s registers", name);
108 return mem;
109 }
110
kmb_hw_init(struct drm_device * drm,unsigned long flags)111 static int kmb_hw_init(struct drm_device *drm, unsigned long flags)
112 {
113 struct kmb_drm_private *kmb = to_kmb(drm);
114 struct platform_device *pdev = to_platform_device(drm->dev);
115 int irq_lcd;
116 int ret = 0;
117
118 /* Map LCD MMIO registers */
119 kmb->lcd_mmio = kmb_map_mmio(drm, pdev, "lcd");
120 if (IS_ERR(kmb->lcd_mmio)) {
121 drm_err(&kmb->drm, "failed to map LCD registers\n");
122 return -ENOMEM;
123 }
124
125 /* Map MIPI MMIO registers */
126 ret = kmb_dsi_map_mmio(kmb->kmb_dsi);
127 if (ret)
128 return ret;
129
130 /* Enable display clocks */
131 kmb_initialize_clocks(kmb, &pdev->dev);
132
133 /* Register irqs here - section 17.3 in databook
134 * lists LCD at 79 and 82 for MIPI under MSS CPU -
135 * firmware has redirected 79 to A53 IRQ 33
136 */
137
138 /* Allocate LCD interrupt resources */
139 irq_lcd = platform_get_irq(pdev, 0);
140 if (irq_lcd < 0) {
141 ret = irq_lcd;
142 drm_err(&kmb->drm, "irq_lcd not found");
143 goto setup_fail;
144 }
145
146 /* Get the optional framebuffer memory resource */
147 ret = of_reserved_mem_device_init(drm->dev);
148 if (ret && ret != -ENODEV)
149 return ret;
150
151 spin_lock_init(&kmb->irq_lock);
152
153 kmb->irq_lcd = irq_lcd;
154
155 return 0;
156
157 setup_fail:
158 of_reserved_mem_device_release(drm->dev);
159
160 return ret;
161 }
162
163 static const struct drm_mode_config_funcs kmb_mode_config_funcs = {
164 .fb_create = drm_gem_fb_create,
165 .atomic_check = drm_atomic_helper_check,
166 .atomic_commit = drm_atomic_helper_commit,
167 };
168
kmb_setup_mode_config(struct drm_device * drm)169 static int kmb_setup_mode_config(struct drm_device *drm)
170 {
171 int ret;
172 struct kmb_drm_private *kmb = to_kmb(drm);
173
174 ret = drmm_mode_config_init(drm);
175 if (ret)
176 return ret;
177 drm->mode_config.min_width = KMB_FB_MIN_WIDTH;
178 drm->mode_config.min_height = KMB_FB_MIN_HEIGHT;
179 drm->mode_config.max_width = KMB_FB_MAX_WIDTH;
180 drm->mode_config.max_height = KMB_FB_MAX_HEIGHT;
181 drm->mode_config.preferred_depth = 24;
182 drm->mode_config.funcs = &kmb_mode_config_funcs;
183
184 ret = kmb_setup_crtc(drm);
185 if (ret < 0) {
186 drm_err(drm, "failed to create crtc\n");
187 return ret;
188 }
189 ret = kmb_dsi_encoder_init(drm, kmb->kmb_dsi);
190 /* Set the CRTC's port so that the encoder component can find it */
191 kmb->crtc.port = of_graph_get_port_by_id(drm->dev->of_node, 0);
192 ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
193 if (ret < 0) {
194 drm_err(drm, "failed to initialize vblank\n");
195 pm_runtime_disable(drm->dev);
196 return ret;
197 }
198
199 drm_mode_config_reset(drm);
200 return 0;
201 }
202
handle_lcd_irq(struct drm_device * dev)203 static irqreturn_t handle_lcd_irq(struct drm_device *dev)
204 {
205 unsigned long status, val, val1;
206 int plane_id, dma0_state, dma1_state;
207 struct kmb_drm_private *kmb = to_kmb(dev);
208 u32 ctrl = 0;
209
210 status = kmb_read_lcd(kmb, LCD_INT_STATUS);
211
212 spin_lock(&kmb->irq_lock);
213 if (status & LCD_INT_EOF) {
214 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_EOF);
215
216 /* When disabling/enabling LCD layers, the change takes effect
217 * immediately and does not wait for EOF (end of frame).
218 * When kmb_plane_atomic_disable is called, mark the plane as
219 * disabled but actually disable the plane when EOF irq is
220 * being handled.
221 */
222 for (plane_id = LAYER_0;
223 plane_id < KMB_MAX_PLANES; plane_id++) {
224 if (kmb->plane_status[plane_id].disable) {
225 kmb_clr_bitmask_lcd(kmb,
226 LCD_LAYERn_DMA_CFG
227 (plane_id),
228 LCD_DMA_LAYER_ENABLE);
229
230 kmb_clr_bitmask_lcd(kmb, LCD_CONTROL,
231 kmb->plane_status[plane_id].ctrl);
232
233 ctrl = kmb_read_lcd(kmb, LCD_CONTROL);
234 if (!(ctrl & (LCD_CTRL_VL1_ENABLE |
235 LCD_CTRL_VL2_ENABLE |
236 LCD_CTRL_GL1_ENABLE |
237 LCD_CTRL_GL2_ENABLE))) {
238 /* If no LCD layers are using DMA,
239 * then disable DMA pipelined AXI read
240 * transactions.
241 */
242 kmb_clr_bitmask_lcd(kmb, LCD_CONTROL,
243 LCD_CTRL_PIPELINE_DMA);
244 }
245
246 kmb->plane_status[plane_id].disable = false;
247 }
248 }
249 if (kmb->kmb_under_flow) {
250 /* DMA Recovery after underflow */
251 dma0_state = (kmb->layer_no == 0) ?
252 LCD_VIDEO0_DMA0_STATE : LCD_VIDEO1_DMA0_STATE;
253 dma1_state = (kmb->layer_no == 0) ?
254 LCD_VIDEO0_DMA1_STATE : LCD_VIDEO1_DMA1_STATE;
255
256 do {
257 kmb_write_lcd(kmb, LCD_FIFO_FLUSH, 1);
258 val = kmb_read_lcd(kmb, dma0_state)
259 & LCD_DMA_STATE_ACTIVE;
260 val1 = kmb_read_lcd(kmb, dma1_state)
261 & LCD_DMA_STATE_ACTIVE;
262 } while ((val || val1));
263 /* disable dma */
264 kmb_clr_bitmask_lcd(kmb,
265 LCD_LAYERn_DMA_CFG(kmb->layer_no),
266 LCD_DMA_LAYER_ENABLE);
267 kmb_write_lcd(kmb, LCD_FIFO_FLUSH, 1);
268 kmb->kmb_flush_done = 1;
269 kmb->kmb_under_flow = 0;
270 }
271 }
272
273 if (status & LCD_INT_LINE_CMP) {
274 /* clear line compare interrupt */
275 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_LINE_CMP);
276 }
277
278 if (status & LCD_INT_VERT_COMP) {
279 /* Read VSTATUS */
280 val = kmb_read_lcd(kmb, LCD_VSTATUS);
281 val = (val & LCD_VSTATUS_VERTICAL_STATUS_MASK);
282 switch (val) {
283 case LCD_VSTATUS_COMPARE_VSYNC:
284 /* Clear vertical compare interrupt */
285 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_VERT_COMP);
286 if (kmb->kmb_flush_done) {
287 kmb_set_bitmask_lcd(kmb,
288 LCD_LAYERn_DMA_CFG
289 (kmb->layer_no),
290 LCD_DMA_LAYER_ENABLE);
291 kmb->kmb_flush_done = 0;
292 }
293 drm_crtc_handle_vblank(&kmb->crtc);
294 break;
295 case LCD_VSTATUS_COMPARE_BACKPORCH:
296 case LCD_VSTATUS_COMPARE_ACTIVE:
297 case LCD_VSTATUS_COMPARE_FRONT_PORCH:
298 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_VERT_COMP);
299 break;
300 }
301 }
302 if (status & LCD_INT_DMA_ERR) {
303 val =
304 (status & LCD_INT_DMA_ERR &
305 kmb_read_lcd(kmb, LCD_INT_ENABLE));
306 /* LAYER0 - VL0 */
307 if (val & (LAYER0_DMA_FIFO_UNDERFLOW |
308 LAYER0_DMA_CB_FIFO_UNDERFLOW |
309 LAYER0_DMA_CR_FIFO_UNDERFLOW)) {
310 kmb->kmb_under_flow++;
311 drm_info(&kmb->drm,
312 "!LAYER0:VL0 DMA UNDERFLOW val = 0x%lx,under_flow=%d",
313 val, kmb->kmb_under_flow);
314 /* disable underflow interrupt */
315 kmb_clr_bitmask_lcd(kmb, LCD_INT_ENABLE,
316 LAYER0_DMA_FIFO_UNDERFLOW |
317 LAYER0_DMA_CB_FIFO_UNDERFLOW |
318 LAYER0_DMA_CR_FIFO_UNDERFLOW);
319 kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR,
320 LAYER0_DMA_CB_FIFO_UNDERFLOW |
321 LAYER0_DMA_FIFO_UNDERFLOW |
322 LAYER0_DMA_CR_FIFO_UNDERFLOW);
323 /* disable auto restart mode */
324 kmb_clr_bitmask_lcd(kmb, LCD_LAYERn_DMA_CFG(0),
325 LCD_DMA_LAYER_CONT_PING_PONG_UPDATE);
326
327 kmb->layer_no = 0;
328 }
329
330 if (val & LAYER0_DMA_FIFO_OVERFLOW)
331 drm_dbg(&kmb->drm,
332 "LAYER0:VL0 DMA OVERFLOW val = 0x%lx", val);
333 if (val & LAYER0_DMA_CB_FIFO_OVERFLOW)
334 drm_dbg(&kmb->drm,
335 "LAYER0:VL0 DMA CB OVERFLOW val = 0x%lx", val);
336 if (val & LAYER0_DMA_CR_FIFO_OVERFLOW)
337 drm_dbg(&kmb->drm,
338 "LAYER0:VL0 DMA CR OVERFLOW val = 0x%lx", val);
339
340 /* LAYER1 - VL1 */
341 if (val & (LAYER1_DMA_FIFO_UNDERFLOW |
342 LAYER1_DMA_CB_FIFO_UNDERFLOW |
343 LAYER1_DMA_CR_FIFO_UNDERFLOW)) {
344 kmb->kmb_under_flow++;
345 drm_info(&kmb->drm,
346 "!LAYER1:VL1 DMA UNDERFLOW val = 0x%lx, under_flow=%d",
347 val, kmb->kmb_under_flow);
348 /* disable underflow interrupt */
349 kmb_clr_bitmask_lcd(kmb, LCD_INT_ENABLE,
350 LAYER1_DMA_FIFO_UNDERFLOW |
351 LAYER1_DMA_CB_FIFO_UNDERFLOW |
352 LAYER1_DMA_CR_FIFO_UNDERFLOW);
353 kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR,
354 LAYER1_DMA_CB_FIFO_UNDERFLOW |
355 LAYER1_DMA_FIFO_UNDERFLOW |
356 LAYER1_DMA_CR_FIFO_UNDERFLOW);
357 /* disable auto restart mode */
358 kmb_clr_bitmask_lcd(kmb, LCD_LAYERn_DMA_CFG(1),
359 LCD_DMA_LAYER_CONT_PING_PONG_UPDATE);
360 kmb->layer_no = 1;
361 }
362
363 /* LAYER1 - VL1 */
364 if (val & LAYER1_DMA_FIFO_OVERFLOW)
365 drm_dbg(&kmb->drm,
366 "LAYER1:VL1 DMA OVERFLOW val = 0x%lx", val);
367 if (val & LAYER1_DMA_CB_FIFO_OVERFLOW)
368 drm_dbg(&kmb->drm,
369 "LAYER1:VL1 DMA CB OVERFLOW val = 0x%lx", val);
370 if (val & LAYER1_DMA_CR_FIFO_OVERFLOW)
371 drm_dbg(&kmb->drm,
372 "LAYER1:VL1 DMA CR OVERFLOW val = 0x%lx", val);
373
374 /* LAYER2 - GL0 */
375 if (val & LAYER2_DMA_FIFO_UNDERFLOW)
376 drm_dbg(&kmb->drm,
377 "LAYER2:GL0 DMA UNDERFLOW val = 0x%lx", val);
378 if (val & LAYER2_DMA_FIFO_OVERFLOW)
379 drm_dbg(&kmb->drm,
380 "LAYER2:GL0 DMA OVERFLOW val = 0x%lx", val);
381
382 /* LAYER3 - GL1 */
383 if (val & LAYER3_DMA_FIFO_UNDERFLOW)
384 drm_dbg(&kmb->drm,
385 "LAYER3:GL1 DMA UNDERFLOW val = 0x%lx", val);
386 if (val & LAYER3_DMA_FIFO_OVERFLOW)
387 drm_dbg(&kmb->drm,
388 "LAYER3:GL1 DMA OVERFLOW val = 0x%lx", val);
389 }
390
391 spin_unlock(&kmb->irq_lock);
392
393 if (status & LCD_INT_LAYER) {
394 /* Clear layer interrupts */
395 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_LAYER);
396 }
397
398 /* Clear all interrupts */
399 kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR, 1);
400 return IRQ_HANDLED;
401 }
402
403 /* IRQ handler */
kmb_isr(int irq,void * arg)404 static irqreturn_t kmb_isr(int irq, void *arg)
405 {
406 struct drm_device *dev = (struct drm_device *)arg;
407
408 handle_lcd_irq(dev);
409 return IRQ_HANDLED;
410 }
411
kmb_irq_reset(struct drm_device * drm)412 static void kmb_irq_reset(struct drm_device *drm)
413 {
414 kmb_write_lcd(to_kmb(drm), LCD_INT_CLEAR, 0xFFFF);
415 kmb_write_lcd(to_kmb(drm), LCD_INT_ENABLE, 0);
416 }
417
kmb_irq_install(struct drm_device * drm,unsigned int irq)418 static int kmb_irq_install(struct drm_device *drm, unsigned int irq)
419 {
420 if (irq == IRQ_NOTCONNECTED)
421 return -ENOTCONN;
422
423 kmb_irq_reset(drm);
424
425 return request_irq(irq, kmb_isr, 0, drm->driver->name, drm);
426 }
427
kmb_irq_uninstall(struct drm_device * drm)428 static void kmb_irq_uninstall(struct drm_device *drm)
429 {
430 struct kmb_drm_private *kmb = to_kmb(drm);
431
432 kmb_irq_reset(drm);
433 free_irq(kmb->irq_lcd, drm);
434 }
435
436 DEFINE_DRM_GEM_DMA_FOPS(fops);
437
438 static const struct drm_driver kmb_driver = {
439 .driver_features = DRIVER_GEM |
440 DRIVER_MODESET | DRIVER_ATOMIC,
441 /* GEM Operations */
442 .fops = &fops,
443 DRM_GEM_DMA_DRIVER_OPS_VMAP,
444 .name = "kmb-drm",
445 .desc = "KEEMBAY DISPLAY DRIVER",
446 .date = DRIVER_DATE,
447 .major = DRIVER_MAJOR,
448 .minor = DRIVER_MINOR,
449 };
450
kmb_remove(struct platform_device * pdev)451 static void kmb_remove(struct platform_device *pdev)
452 {
453 struct device *dev = &pdev->dev;
454 struct drm_device *drm = dev_get_drvdata(dev);
455 struct kmb_drm_private *kmb = to_kmb(drm);
456
457 drm_dev_unregister(drm);
458 drm_kms_helper_poll_fini(drm);
459 of_node_put(kmb->crtc.port);
460 kmb->crtc.port = NULL;
461 pm_runtime_get_sync(drm->dev);
462 kmb_irq_uninstall(drm);
463 pm_runtime_put_sync(drm->dev);
464 pm_runtime_disable(drm->dev);
465
466 of_reserved_mem_device_release(drm->dev);
467
468 /* Release clks */
469 kmb_display_clk_disable(kmb);
470
471 dev_set_drvdata(dev, NULL);
472
473 /* Unregister DSI host */
474 kmb_dsi_host_unregister(kmb->kmb_dsi);
475 drm_atomic_helper_shutdown(drm);
476 }
477
kmb_probe(struct platform_device * pdev)478 static int kmb_probe(struct platform_device *pdev)
479 {
480 struct device *dev = get_device(&pdev->dev);
481 struct kmb_drm_private *kmb;
482 int ret = 0;
483 struct device_node *dsi_in;
484 struct device_node *dsi_node;
485 struct platform_device *dsi_pdev;
486
487 /* The bridge (ADV 7535) will return -EPROBE_DEFER until it
488 * has a mipi_dsi_host to register its device to. So, we
489 * first register the DSI host during probe time, and then return
490 * -EPROBE_DEFER until the bridge is loaded. Probe will be called again
491 * and then the rest of the driver initialization can proceed
492 * afterwards and the bridge can be successfully attached.
493 */
494 dsi_in = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
495 if (!dsi_in) {
496 DRM_ERROR("Failed to get dsi_in node info from DT");
497 return -EINVAL;
498 }
499 dsi_node = of_graph_get_remote_port_parent(dsi_in);
500 if (!dsi_node) {
501 of_node_put(dsi_in);
502 DRM_ERROR("Failed to get dsi node from DT\n");
503 return -EINVAL;
504 }
505
506 dsi_pdev = of_find_device_by_node(dsi_node);
507 if (!dsi_pdev) {
508 of_node_put(dsi_in);
509 of_node_put(dsi_node);
510 DRM_ERROR("Failed to get dsi platform device\n");
511 return -EINVAL;
512 }
513
514 of_node_put(dsi_in);
515 of_node_put(dsi_node);
516 ret = kmb_dsi_host_bridge_init(get_device(&dsi_pdev->dev));
517
518 if (ret == -EPROBE_DEFER) {
519 return -EPROBE_DEFER;
520 } else if (ret) {
521 DRM_ERROR("probe failed to initialize DSI host bridge\n");
522 return ret;
523 }
524
525 /* Create DRM device */
526 kmb = devm_drm_dev_alloc(dev, &kmb_driver,
527 struct kmb_drm_private, drm);
528 if (IS_ERR(kmb))
529 return PTR_ERR(kmb);
530
531 dev_set_drvdata(dev, &kmb->drm);
532
533 /* Initialize MIPI DSI */
534 kmb->kmb_dsi = kmb_dsi_init(dsi_pdev);
535 if (IS_ERR(kmb->kmb_dsi)) {
536 drm_err(&kmb->drm, "failed to initialize DSI\n");
537 ret = PTR_ERR(kmb->kmb_dsi);
538 goto err_free1;
539 }
540
541 kmb->kmb_dsi->dev = &dsi_pdev->dev;
542 kmb->kmb_dsi->pdev = dsi_pdev;
543 ret = kmb_hw_init(&kmb->drm, 0);
544 if (ret)
545 goto err_free1;
546
547 ret = kmb_setup_mode_config(&kmb->drm);
548 if (ret)
549 goto err_free;
550
551 ret = kmb_irq_install(&kmb->drm, kmb->irq_lcd);
552 if (ret < 0) {
553 drm_err(&kmb->drm, "failed to install IRQ handler\n");
554 goto err_irq;
555 }
556
557 drm_kms_helper_poll_init(&kmb->drm);
558
559 /* Register graphics device with the kernel */
560 ret = drm_dev_register(&kmb->drm, 0);
561 if (ret)
562 goto err_register;
563
564 drm_fbdev_dma_setup(&kmb->drm, 0);
565
566 return 0;
567
568 err_register:
569 drm_kms_helper_poll_fini(&kmb->drm);
570 err_irq:
571 pm_runtime_disable(kmb->drm.dev);
572 err_free:
573 drm_crtc_cleanup(&kmb->crtc);
574 drm_mode_config_cleanup(&kmb->drm);
575 err_free1:
576 dev_set_drvdata(dev, NULL);
577 kmb_dsi_host_unregister(kmb->kmb_dsi);
578
579 return ret;
580 }
581
582 static const struct of_device_id kmb_of_match[] = {
583 {.compatible = "intel,keembay-display"},
584 {},
585 };
586
587 MODULE_DEVICE_TABLE(of, kmb_of_match);
588
kmb_pm_suspend(struct device * dev)589 static int __maybe_unused kmb_pm_suspend(struct device *dev)
590 {
591 struct drm_device *drm = dev_get_drvdata(dev);
592 struct kmb_drm_private *kmb = to_kmb(drm);
593
594 drm_kms_helper_poll_disable(drm);
595
596 kmb->state = drm_atomic_helper_suspend(drm);
597 if (IS_ERR(kmb->state)) {
598 drm_kms_helper_poll_enable(drm);
599 return PTR_ERR(kmb->state);
600 }
601
602 return 0;
603 }
604
kmb_pm_resume(struct device * dev)605 static int __maybe_unused kmb_pm_resume(struct device *dev)
606 {
607 struct drm_device *drm = dev_get_drvdata(dev);
608 struct kmb_drm_private *kmb = drm ? to_kmb(drm) : NULL;
609
610 if (!kmb)
611 return 0;
612
613 drm_atomic_helper_resume(drm, kmb->state);
614 drm_kms_helper_poll_enable(drm);
615
616 return 0;
617 }
618
619 static SIMPLE_DEV_PM_OPS(kmb_pm_ops, kmb_pm_suspend, kmb_pm_resume);
620
621 static struct platform_driver kmb_platform_driver = {
622 .probe = kmb_probe,
623 .remove_new = kmb_remove,
624 .driver = {
625 .name = "kmb-drm",
626 .pm = &kmb_pm_ops,
627 .of_match_table = kmb_of_match,
628 },
629 };
630
631 drm_module_platform_driver(kmb_platform_driver);
632
633 MODULE_AUTHOR("Intel Corporation");
634 MODULE_DESCRIPTION("Keembay Display driver");
635 MODULE_LICENSE("GPL v2");
636