xref: /linux/drivers/gpu/drm/i915/display/intel_modeset_setup.c (revision da5b2ad1c2f18834cb1ce429e2e5a5cf5cbdf21b)
1 // SPDX-License-Identifier: MIT
2 /*
3  * Copyright © 2022 Intel Corporation
4  *
5  * Read out the current hardware modeset state, and sanitize it to the current
6  * state.
7  */
8 
9 #include <drm/drm_atomic_uapi.h>
10 #include <drm/drm_atomic_state_helper.h>
11 
12 #include "i915_drv.h"
13 #include "i915_reg.h"
14 #include "i9xx_wm.h"
15 #include "intel_atomic.h"
16 #include "intel_bw.h"
17 #include "intel_color.h"
18 #include "intel_crtc.h"
19 #include "intel_crtc_state_dump.h"
20 #include "intel_ddi.h"
21 #include "intel_de.h"
22 #include "intel_display.h"
23 #include "intel_display_power.h"
24 #include "intel_display_types.h"
25 #include "intel_dmc.h"
26 #include "intel_fifo_underrun.h"
27 #include "intel_modeset_setup.h"
28 #include "intel_pch_display.h"
29 #include "intel_pmdemand.h"
30 #include "intel_tc.h"
31 #include "intel_vblank.h"
32 #include "intel_wm.h"
33 #include "skl_watermark.h"
34 
35 static void intel_crtc_disable_noatomic_begin(struct intel_crtc *crtc,
36 					      struct drm_modeset_acquire_ctx *ctx)
37 {
38 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
39 	struct intel_crtc_state *crtc_state =
40 		to_intel_crtc_state(crtc->base.state);
41 	struct intel_plane *plane;
42 	struct drm_atomic_state *state;
43 	struct intel_crtc *temp_crtc;
44 	enum pipe pipe = crtc->pipe;
45 
46 	if (!crtc_state->hw.active)
47 		return;
48 
49 	for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) {
50 		const struct intel_plane_state *plane_state =
51 			to_intel_plane_state(plane->base.state);
52 
53 		if (plane_state->uapi.visible)
54 			intel_plane_disable_noatomic(crtc, plane);
55 	}
56 
57 	state = drm_atomic_state_alloc(&i915->drm);
58 	if (!state) {
59 		drm_dbg_kms(&i915->drm,
60 			    "failed to disable [CRTC:%d:%s], out of memory",
61 			    crtc->base.base.id, crtc->base.name);
62 		return;
63 	}
64 
65 	state->acquire_ctx = ctx;
66 	to_intel_atomic_state(state)->internal = true;
67 
68 	/* Everything's already locked, -EDEADLK can't happen. */
69 	for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc,
70 					 BIT(pipe) |
71 					 intel_crtc_joiner_secondary_pipes(crtc_state)) {
72 		struct intel_crtc_state *temp_crtc_state =
73 			intel_atomic_get_crtc_state(state, temp_crtc);
74 		int ret;
75 
76 		ret = drm_atomic_add_affected_connectors(state, &temp_crtc->base);
77 
78 		drm_WARN_ON(&i915->drm, IS_ERR(temp_crtc_state) || ret);
79 	}
80 
81 	i915->display.funcs.display->crtc_disable(to_intel_atomic_state(state), crtc);
82 
83 	drm_atomic_state_put(state);
84 
85 	drm_dbg_kms(&i915->drm,
86 		    "[CRTC:%d:%s] hw state adjusted, was enabled, now disabled\n",
87 		    crtc->base.base.id, crtc->base.name);
88 
89 	crtc->active = false;
90 	crtc->base.enabled = false;
91 
92 	if (crtc_state->shared_dpll)
93 		intel_unreference_shared_dpll_crtc(crtc,
94 						   crtc_state->shared_dpll,
95 						   &crtc_state->shared_dpll->state);
96 }
97 
98 static void set_encoder_for_connector(struct intel_connector *connector,
99 				      struct intel_encoder *encoder)
100 {
101 	struct drm_connector_state *conn_state = connector->base.state;
102 
103 	if (conn_state->crtc)
104 		drm_connector_put(&connector->base);
105 
106 	if (encoder) {
107 		conn_state->best_encoder = &encoder->base;
108 		conn_state->crtc = encoder->base.crtc;
109 		drm_connector_get(&connector->base);
110 	} else {
111 		conn_state->best_encoder = NULL;
112 		conn_state->crtc = NULL;
113 	}
114 }
115 
116 static void reset_encoder_connector_state(struct intel_encoder *encoder)
117 {
118 	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
119 	struct intel_pmdemand_state *pmdemand_state =
120 		to_intel_pmdemand_state(i915->display.pmdemand.obj.state);
121 	struct intel_connector *connector;
122 	struct drm_connector_list_iter conn_iter;
123 
124 	drm_connector_list_iter_begin(&i915->drm, &conn_iter);
125 	for_each_intel_connector_iter(connector, &conn_iter) {
126 		if (connector->base.encoder != &encoder->base)
127 			continue;
128 
129 		/* Clear the corresponding bit in pmdemand active phys mask */
130 		intel_pmdemand_update_phys_mask(i915, encoder,
131 						pmdemand_state, false);
132 
133 		set_encoder_for_connector(connector, NULL);
134 
135 		connector->base.dpms = DRM_MODE_DPMS_OFF;
136 		connector->base.encoder = NULL;
137 	}
138 	drm_connector_list_iter_end(&conn_iter);
139 }
140 
141 static void reset_crtc_encoder_state(struct intel_crtc *crtc)
142 {
143 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
144 	struct intel_encoder *encoder;
145 
146 	for_each_encoder_on_crtc(&i915->drm, &crtc->base, encoder) {
147 		reset_encoder_connector_state(encoder);
148 		encoder->base.crtc = NULL;
149 	}
150 }
151 
152 static void intel_crtc_disable_noatomic_complete(struct intel_crtc *crtc)
153 {
154 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
155 	struct intel_bw_state *bw_state =
156 		to_intel_bw_state(i915->display.bw.obj.state);
157 	struct intel_cdclk_state *cdclk_state =
158 		to_intel_cdclk_state(i915->display.cdclk.obj.state);
159 	struct intel_dbuf_state *dbuf_state =
160 		to_intel_dbuf_state(i915->display.dbuf.obj.state);
161 	struct intel_pmdemand_state *pmdemand_state =
162 		to_intel_pmdemand_state(i915->display.pmdemand.obj.state);
163 	struct intel_crtc_state *crtc_state =
164 		to_intel_crtc_state(crtc->base.state);
165 	enum pipe pipe = crtc->pipe;
166 
167 	__drm_atomic_helper_crtc_destroy_state(&crtc_state->uapi);
168 	intel_crtc_free_hw_state(crtc_state);
169 	intel_crtc_state_reset(crtc_state, crtc);
170 
171 	reset_crtc_encoder_state(crtc);
172 
173 	intel_fbc_disable(crtc);
174 	intel_update_watermarks(i915);
175 
176 	intel_display_power_put_all_in_set(i915, &crtc->enabled_power_domains);
177 
178 	cdclk_state->min_cdclk[pipe] = 0;
179 	cdclk_state->min_voltage_level[pipe] = 0;
180 	cdclk_state->active_pipes &= ~BIT(pipe);
181 
182 	dbuf_state->active_pipes &= ~BIT(pipe);
183 
184 	bw_state->data_rate[pipe] = 0;
185 	bw_state->num_active_planes[pipe] = 0;
186 
187 	intel_pmdemand_update_port_clock(i915, pmdemand_state, pipe, 0);
188 }
189 
190 /*
191  * Return all the pipes using a transcoder in @transcoder_mask.
192  * For joiner configs return only the joiner primary.
193  */
194 static u8 get_transcoder_pipes(struct drm_i915_private *i915,
195 			       u8 transcoder_mask)
196 {
197 	struct intel_crtc *temp_crtc;
198 	u8 pipes = 0;
199 
200 	for_each_intel_crtc(&i915->drm, temp_crtc) {
201 		struct intel_crtc_state *temp_crtc_state =
202 			to_intel_crtc_state(temp_crtc->base.state);
203 
204 		if (temp_crtc_state->cpu_transcoder == INVALID_TRANSCODER)
205 			continue;
206 
207 		if (intel_crtc_is_joiner_secondary(temp_crtc_state))
208 			continue;
209 
210 		if (transcoder_mask & BIT(temp_crtc_state->cpu_transcoder))
211 			pipes |= BIT(temp_crtc->pipe);
212 	}
213 
214 	return pipes;
215 }
216 
217 /*
218  * Return the port sync master and slave pipes linked to @crtc.
219  * For joiner configs return only the joiner primary pipes.
220  */
221 static void get_portsync_pipes(struct intel_crtc *crtc,
222 			       u8 *master_pipe_mask, u8 *slave_pipes_mask)
223 {
224 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
225 	struct intel_crtc_state *crtc_state =
226 		to_intel_crtc_state(crtc->base.state);
227 	struct intel_crtc *master_crtc;
228 	struct intel_crtc_state *master_crtc_state;
229 	enum transcoder master_transcoder;
230 
231 	if (!is_trans_port_sync_mode(crtc_state)) {
232 		*master_pipe_mask = BIT(crtc->pipe);
233 		*slave_pipes_mask = 0;
234 
235 		return;
236 	}
237 
238 	if (is_trans_port_sync_master(crtc_state))
239 		master_transcoder = crtc_state->cpu_transcoder;
240 	else
241 		master_transcoder = crtc_state->master_transcoder;
242 
243 	*master_pipe_mask = get_transcoder_pipes(i915, BIT(master_transcoder));
244 	drm_WARN_ON(&i915->drm, !is_power_of_2(*master_pipe_mask));
245 
246 	master_crtc = intel_crtc_for_pipe(i915, ffs(*master_pipe_mask) - 1);
247 	master_crtc_state = to_intel_crtc_state(master_crtc->base.state);
248 	*slave_pipes_mask = get_transcoder_pipes(i915, master_crtc_state->sync_mode_slaves_mask);
249 }
250 
251 static u8 get_joiner_secondary_pipes(struct drm_i915_private *i915, u8 primary_pipes_mask)
252 {
253 	struct intel_crtc *primary_crtc;
254 	u8 pipes = 0;
255 
256 	for_each_intel_crtc_in_pipe_mask(&i915->drm, primary_crtc, primary_pipes_mask) {
257 		struct intel_crtc_state *primary_crtc_state =
258 			to_intel_crtc_state(primary_crtc->base.state);
259 
260 		pipes |= intel_crtc_joiner_secondary_pipes(primary_crtc_state);
261 	}
262 
263 	return pipes;
264 }
265 
266 static void intel_crtc_disable_noatomic(struct intel_crtc *crtc,
267 					struct drm_modeset_acquire_ctx *ctx)
268 {
269 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
270 	u8 portsync_master_mask;
271 	u8 portsync_slaves_mask;
272 	u8 joiner_secondaries_mask;
273 	struct intel_crtc *temp_crtc;
274 
275 	/* TODO: Add support for MST */
276 	get_portsync_pipes(crtc, &portsync_master_mask, &portsync_slaves_mask);
277 	joiner_secondaries_mask = get_joiner_secondary_pipes(i915,
278 							     portsync_master_mask |
279 							     portsync_slaves_mask);
280 
281 	drm_WARN_ON(&i915->drm,
282 		    portsync_master_mask & portsync_slaves_mask ||
283 		    portsync_master_mask & joiner_secondaries_mask ||
284 		    portsync_slaves_mask & joiner_secondaries_mask);
285 
286 	for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, joiner_secondaries_mask)
287 		intel_crtc_disable_noatomic_begin(temp_crtc, ctx);
288 
289 	for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, portsync_slaves_mask)
290 		intel_crtc_disable_noatomic_begin(temp_crtc, ctx);
291 
292 	for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, portsync_master_mask)
293 		intel_crtc_disable_noatomic_begin(temp_crtc, ctx);
294 
295 	for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc,
296 					 joiner_secondaries_mask |
297 					 portsync_slaves_mask |
298 					 portsync_master_mask)
299 		intel_crtc_disable_noatomic_complete(temp_crtc);
300 }
301 
302 static void intel_modeset_update_connector_atomic_state(struct drm_i915_private *i915)
303 {
304 	struct intel_connector *connector;
305 	struct drm_connector_list_iter conn_iter;
306 
307 	drm_connector_list_iter_begin(&i915->drm, &conn_iter);
308 	for_each_intel_connector_iter(connector, &conn_iter) {
309 		struct drm_connector_state *conn_state = connector->base.state;
310 		struct intel_encoder *encoder =
311 			to_intel_encoder(connector->base.encoder);
312 
313 		set_encoder_for_connector(connector, encoder);
314 
315 		if (encoder) {
316 			struct intel_crtc *crtc =
317 				to_intel_crtc(encoder->base.crtc);
318 			const struct intel_crtc_state *crtc_state =
319 				to_intel_crtc_state(crtc->base.state);
320 
321 			conn_state->max_bpc = (crtc_state->pipe_bpp ?: 24) / 3;
322 		}
323 	}
324 	drm_connector_list_iter_end(&conn_iter);
325 }
326 
327 static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state)
328 {
329 	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
330 
331 	if (intel_crtc_is_joiner_secondary(crtc_state))
332 		return;
333 
334 	crtc_state->uapi.enable = crtc_state->hw.enable;
335 	crtc_state->uapi.active = crtc_state->hw.active;
336 	drm_WARN_ON(crtc_state->uapi.crtc->dev,
337 		    drm_atomic_set_mode_for_crtc(&crtc_state->uapi, &crtc_state->hw.mode) < 0);
338 
339 	crtc_state->uapi.adjusted_mode = crtc_state->hw.adjusted_mode;
340 	crtc_state->uapi.scaling_filter = crtc_state->hw.scaling_filter;
341 
342 	if (DISPLAY_INFO(i915)->color.degamma_lut_size) {
343 		/* assume 1:1 mapping */
344 		drm_property_replace_blob(&crtc_state->hw.degamma_lut,
345 					  crtc_state->pre_csc_lut);
346 		drm_property_replace_blob(&crtc_state->hw.gamma_lut,
347 					  crtc_state->post_csc_lut);
348 	} else {
349 		/*
350 		 * ilk/snb hw may be configured for either pre_csc_lut
351 		 * or post_csc_lut, but we don't advertise degamma_lut as
352 		 * being available in the uapi since there is only one
353 		 * hardware LUT. Always assign the result of the readout
354 		 * to gamma_lut as that is the only valid source of LUTs
355 		 * in the uapi.
356 		 */
357 		drm_WARN_ON(&i915->drm, crtc_state->post_csc_lut &&
358 			    crtc_state->pre_csc_lut);
359 
360 		drm_property_replace_blob(&crtc_state->hw.degamma_lut,
361 					  NULL);
362 		drm_property_replace_blob(&crtc_state->hw.gamma_lut,
363 					  crtc_state->post_csc_lut ?:
364 					  crtc_state->pre_csc_lut);
365 	}
366 
367 	drm_property_replace_blob(&crtc_state->uapi.degamma_lut,
368 				  crtc_state->hw.degamma_lut);
369 	drm_property_replace_blob(&crtc_state->uapi.gamma_lut,
370 				  crtc_state->hw.gamma_lut);
371 	drm_property_replace_blob(&crtc_state->uapi.ctm,
372 				  crtc_state->hw.ctm);
373 }
374 
375 static void
376 intel_sanitize_plane_mapping(struct drm_i915_private *i915)
377 {
378 	struct intel_crtc *crtc;
379 
380 	if (DISPLAY_VER(i915) >= 4)
381 		return;
382 
383 	for_each_intel_crtc(&i915->drm, crtc) {
384 		struct intel_plane *plane =
385 			to_intel_plane(crtc->base.primary);
386 		struct intel_crtc *plane_crtc;
387 		enum pipe pipe;
388 
389 		if (!plane->get_hw_state(plane, &pipe))
390 			continue;
391 
392 		if (pipe == crtc->pipe)
393 			continue;
394 
395 		drm_dbg_kms(&i915->drm,
396 			    "[PLANE:%d:%s] attached to the wrong pipe, disabling plane\n",
397 			    plane->base.base.id, plane->base.name);
398 
399 		plane_crtc = intel_crtc_for_pipe(i915, pipe);
400 		intel_plane_disable_noatomic(plane_crtc, plane);
401 	}
402 }
403 
404 static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
405 {
406 	struct drm_device *dev = crtc->base.dev;
407 	struct intel_encoder *encoder;
408 
409 	for_each_encoder_on_crtc(dev, &crtc->base, encoder)
410 		return true;
411 
412 	return false;
413 }
414 
415 static bool intel_crtc_needs_link_reset(struct intel_crtc *crtc)
416 {
417 	struct drm_device *dev = crtc->base.dev;
418 	struct intel_encoder *encoder;
419 
420 	for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
421 		struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
422 
423 		if (dig_port && intel_tc_port_link_needs_reset(dig_port))
424 			return true;
425 	}
426 
427 	return false;
428 }
429 
430 static struct intel_connector *intel_encoder_find_connector(struct intel_encoder *encoder)
431 {
432 	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
433 	struct drm_connector_list_iter conn_iter;
434 	struct intel_connector *connector;
435 	struct intel_connector *found_connector = NULL;
436 
437 	drm_connector_list_iter_begin(&i915->drm, &conn_iter);
438 	for_each_intel_connector_iter(connector, &conn_iter) {
439 		if (&encoder->base == connector->base.encoder) {
440 			found_connector = connector;
441 			break;
442 		}
443 	}
444 	drm_connector_list_iter_end(&conn_iter);
445 
446 	return found_connector;
447 }
448 
449 static void intel_sanitize_fifo_underrun_reporting(const struct intel_crtc_state *crtc_state)
450 {
451 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
452 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
453 
454 	/*
455 	 * We start out with underrun reporting disabled on active
456 	 * pipes to avoid races.
457 	 *
458 	 * Also on gmch platforms we dont have any hardware bits to
459 	 * disable the underrun reporting. Which means we need to start
460 	 * out with underrun reporting disabled also on inactive pipes,
461 	 * since otherwise we'll complain about the garbage we read when
462 	 * e.g. coming up after runtime pm.
463 	 *
464 	 * No protection against concurrent access is required - at
465 	 * worst a fifo underrun happens which also sets this to false.
466 	 */
467 	intel_init_fifo_underrun_reporting(i915, crtc,
468 					   !crtc_state->hw.active &&
469 					   !HAS_GMCH(i915));
470 }
471 
472 static bool intel_sanitize_crtc(struct intel_crtc *crtc,
473 				struct drm_modeset_acquire_ctx *ctx)
474 {
475 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
476 	struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state);
477 	bool needs_link_reset;
478 
479 	if (crtc_state->hw.active) {
480 		struct intel_plane *plane;
481 
482 		/* Disable everything but the primary plane */
483 		for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) {
484 			const struct intel_plane_state *plane_state =
485 				to_intel_plane_state(plane->base.state);
486 
487 			if (plane_state->uapi.visible &&
488 			    plane->base.type != DRM_PLANE_TYPE_PRIMARY)
489 				intel_plane_disable_noatomic(crtc, plane);
490 		}
491 
492 		/* Disable any background color/etc. set by the BIOS */
493 		intel_color_commit_noarm(crtc_state);
494 		intel_color_commit_arm(crtc_state);
495 	}
496 
497 	if (!crtc_state->hw.active ||
498 	    intel_crtc_is_joiner_secondary(crtc_state))
499 		return false;
500 
501 	needs_link_reset = intel_crtc_needs_link_reset(crtc);
502 
503 	/*
504 	 * Adjust the state of the output pipe according to whether we have
505 	 * active connectors/encoders.
506 	 */
507 	if (!needs_link_reset && intel_crtc_has_encoders(crtc))
508 		return false;
509 
510 	intel_crtc_disable_noatomic(crtc, ctx);
511 
512 	/*
513 	 * The HPD state on other active/disconnected TC ports may be stuck in
514 	 * the connected state until this port is disabled and a ~10ms delay has
515 	 * passed, wait here for that so that sanitizing other CRTCs will see the
516 	 * up-to-date HPD state.
517 	 */
518 	if (needs_link_reset)
519 		msleep(20);
520 
521 	return true;
522 }
523 
524 static void intel_sanitize_all_crtcs(struct drm_i915_private *i915,
525 				     struct drm_modeset_acquire_ctx *ctx)
526 {
527 	struct intel_crtc *crtc;
528 	u32 crtcs_forced_off = 0;
529 
530 	/*
531 	 * An active and disconnected TypeC port prevents the HPD live state
532 	 * to get updated on other active/disconnected TypeC ports, so after
533 	 * a port gets disabled the CRTCs using other TypeC ports must be
534 	 * rechecked wrt. their link status.
535 	 */
536 	for (;;) {
537 		u32 old_mask = crtcs_forced_off;
538 
539 		for_each_intel_crtc(&i915->drm, crtc) {
540 			u32 crtc_mask = drm_crtc_mask(&crtc->base);
541 
542 			if (crtcs_forced_off & crtc_mask)
543 				continue;
544 
545 			if (intel_sanitize_crtc(crtc, ctx))
546 				crtcs_forced_off |= crtc_mask;
547 		}
548 		if (crtcs_forced_off == old_mask)
549 			break;
550 	}
551 
552 	for_each_intel_crtc(&i915->drm, crtc) {
553 		struct intel_crtc_state *crtc_state =
554 			to_intel_crtc_state(crtc->base.state);
555 
556 		intel_crtc_state_dump(crtc_state, NULL, "setup_hw_state");
557 	}
558 }
559 
560 static bool has_bogus_dpll_config(const struct intel_crtc_state *crtc_state)
561 {
562 	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
563 
564 	/*
565 	 * Some SNB BIOSen (eg. ASUS K53SV) are known to misprogram
566 	 * the hardware when a high res displays plugged in. DPLL P
567 	 * divider is zero, and the pipe timings are bonkers. We'll
568 	 * try to disable everything in that case.
569 	 *
570 	 * FIXME would be nice to be able to sanitize this state
571 	 * without several WARNs, but for now let's take the easy
572 	 * road.
573 	 */
574 	return IS_SANDYBRIDGE(i915) &&
575 		crtc_state->hw.active &&
576 		crtc_state->shared_dpll &&
577 		crtc_state->port_clock == 0;
578 }
579 
580 static void intel_sanitize_encoder(struct intel_encoder *encoder)
581 {
582 	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
583 	struct intel_connector *connector;
584 	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
585 	struct intel_crtc_state *crtc_state = crtc ?
586 		to_intel_crtc_state(crtc->base.state) : NULL;
587 	struct intel_pmdemand_state *pmdemand_state =
588 		to_intel_pmdemand_state(i915->display.pmdemand.obj.state);
589 
590 	/*
591 	 * We need to check both for a crtc link (meaning that the encoder is
592 	 * active and trying to read from a pipe) and the pipe itself being
593 	 * active.
594 	 */
595 	bool has_active_crtc = crtc_state &&
596 		crtc_state->hw.active;
597 
598 	if (crtc_state && has_bogus_dpll_config(crtc_state)) {
599 		drm_dbg_kms(&i915->drm,
600 			    "BIOS has misprogrammed the hardware. Disabling pipe %c\n",
601 			    pipe_name(crtc->pipe));
602 		has_active_crtc = false;
603 	}
604 
605 	connector = intel_encoder_find_connector(encoder);
606 	if (connector && !has_active_crtc) {
607 		drm_dbg_kms(&i915->drm,
608 			    "[ENCODER:%d:%s] has active connectors but no active pipe!\n",
609 			    encoder->base.base.id,
610 			    encoder->base.name);
611 
612 		/* Clear the corresponding bit in pmdemand active phys mask */
613 		intel_pmdemand_update_phys_mask(i915, encoder,
614 						pmdemand_state, false);
615 
616 		/*
617 		 * Connector is active, but has no active pipe. This is fallout
618 		 * from our resume register restoring. Disable the encoder
619 		 * manually again.
620 		 */
621 		if (crtc_state) {
622 			struct drm_encoder *best_encoder;
623 
624 			drm_dbg_kms(&i915->drm,
625 				    "[ENCODER:%d:%s] manually disabled\n",
626 				    encoder->base.base.id,
627 				    encoder->base.name);
628 
629 			/* avoid oopsing in case the hooks consult best_encoder */
630 			best_encoder = connector->base.state->best_encoder;
631 			connector->base.state->best_encoder = &encoder->base;
632 
633 			/* FIXME NULL atomic state passed! */
634 			if (encoder->disable)
635 				encoder->disable(NULL, encoder, crtc_state,
636 						 connector->base.state);
637 			if (encoder->post_disable)
638 				encoder->post_disable(NULL, encoder, crtc_state,
639 						      connector->base.state);
640 
641 			connector->base.state->best_encoder = best_encoder;
642 		}
643 		encoder->base.crtc = NULL;
644 
645 		/*
646 		 * Inconsistent output/port/pipe state happens presumably due to
647 		 * a bug in one of the get_hw_state functions. Or someplace else
648 		 * in our code, like the register restore mess on resume. Clamp
649 		 * things to off as a safer default.
650 		 */
651 		connector->base.dpms = DRM_MODE_DPMS_OFF;
652 		connector->base.encoder = NULL;
653 	}
654 
655 	/* notify opregion of the sanitized encoder state */
656 	intel_opregion_notify_encoder(encoder, connector && has_active_crtc);
657 
658 	if (HAS_DDI(i915))
659 		intel_ddi_sanitize_encoder_pll_mapping(encoder);
660 }
661 
662 /* FIXME read out full plane state for all planes */
663 static void readout_plane_state(struct drm_i915_private *i915)
664 {
665 	struct intel_plane *plane;
666 	struct intel_crtc *crtc;
667 
668 	for_each_intel_plane(&i915->drm, plane) {
669 		struct intel_plane_state *plane_state =
670 			to_intel_plane_state(plane->base.state);
671 		struct intel_crtc_state *crtc_state;
672 		enum pipe pipe = PIPE_A;
673 		bool visible;
674 
675 		visible = plane->get_hw_state(plane, &pipe);
676 
677 		crtc = intel_crtc_for_pipe(i915, pipe);
678 		crtc_state = to_intel_crtc_state(crtc->base.state);
679 
680 		intel_set_plane_visible(crtc_state, plane_state, visible);
681 
682 		drm_dbg_kms(&i915->drm,
683 			    "[PLANE:%d:%s] hw state readout: %s, pipe %c\n",
684 			    plane->base.base.id, plane->base.name,
685 			    str_enabled_disabled(visible), pipe_name(pipe));
686 	}
687 
688 	for_each_intel_crtc(&i915->drm, crtc) {
689 		struct intel_crtc_state *crtc_state =
690 			to_intel_crtc_state(crtc->base.state);
691 
692 		intel_plane_fixup_bitmasks(crtc_state);
693 	}
694 }
695 
696 static void intel_modeset_readout_hw_state(struct drm_i915_private *i915)
697 {
698 	struct intel_cdclk_state *cdclk_state =
699 		to_intel_cdclk_state(i915->display.cdclk.obj.state);
700 	struct intel_dbuf_state *dbuf_state =
701 		to_intel_dbuf_state(i915->display.dbuf.obj.state);
702 	struct intel_pmdemand_state *pmdemand_state =
703 		to_intel_pmdemand_state(i915->display.pmdemand.obj.state);
704 	enum pipe pipe;
705 	struct intel_crtc *crtc;
706 	struct intel_encoder *encoder;
707 	struct intel_connector *connector;
708 	struct drm_connector_list_iter conn_iter;
709 	u8 active_pipes = 0;
710 
711 	for_each_intel_crtc(&i915->drm, crtc) {
712 		struct intel_crtc_state *crtc_state =
713 			to_intel_crtc_state(crtc->base.state);
714 
715 		__drm_atomic_helper_crtc_destroy_state(&crtc_state->uapi);
716 		intel_crtc_free_hw_state(crtc_state);
717 		intel_crtc_state_reset(crtc_state, crtc);
718 
719 		intel_crtc_get_pipe_config(crtc_state);
720 
721 		crtc_state->hw.enable = crtc_state->hw.active;
722 
723 		crtc->base.enabled = crtc_state->hw.enable;
724 		crtc->active = crtc_state->hw.active;
725 
726 		if (crtc_state->hw.active)
727 			active_pipes |= BIT(crtc->pipe);
728 
729 		drm_dbg_kms(&i915->drm,
730 			    "[CRTC:%d:%s] hw state readout: %s\n",
731 			    crtc->base.base.id, crtc->base.name,
732 			    str_enabled_disabled(crtc_state->hw.active));
733 	}
734 
735 	cdclk_state->active_pipes = active_pipes;
736 	dbuf_state->active_pipes = active_pipes;
737 
738 	readout_plane_state(i915);
739 
740 	for_each_intel_encoder(&i915->drm, encoder) {
741 		struct intel_crtc_state *crtc_state = NULL;
742 
743 		pipe = 0;
744 
745 		if (encoder->get_hw_state(encoder, &pipe)) {
746 			crtc = intel_crtc_for_pipe(i915, pipe);
747 			crtc_state = to_intel_crtc_state(crtc->base.state);
748 
749 			encoder->base.crtc = &crtc->base;
750 			intel_encoder_get_config(encoder, crtc_state);
751 
752 			/* read out to secondary crtc as well for joiner */
753 			if (crtc_state->joiner_pipes) {
754 				struct intel_crtc *secondary_crtc;
755 
756 				/* encoder should read be linked to joiner primary */
757 				WARN_ON(intel_crtc_is_joiner_secondary(crtc_state));
758 
759 				for_each_intel_crtc_in_pipe_mask(&i915->drm, secondary_crtc,
760 								 intel_crtc_joiner_secondary_pipes(crtc_state)) {
761 					struct intel_crtc_state *secondary_crtc_state;
762 
763 					secondary_crtc_state = to_intel_crtc_state(secondary_crtc->base.state);
764 					intel_encoder_get_config(encoder, secondary_crtc_state);
765 				}
766 			}
767 
768 			intel_pmdemand_update_phys_mask(i915, encoder,
769 							pmdemand_state,
770 							true);
771 		} else {
772 			intel_pmdemand_update_phys_mask(i915, encoder,
773 							pmdemand_state,
774 							false);
775 
776 			encoder->base.crtc = NULL;
777 		}
778 
779 		if (encoder->sync_state)
780 			encoder->sync_state(encoder, crtc_state);
781 
782 		drm_dbg_kms(&i915->drm,
783 			    "[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
784 			    encoder->base.base.id, encoder->base.name,
785 			    str_enabled_disabled(encoder->base.crtc),
786 			    pipe_name(pipe));
787 	}
788 
789 	intel_dpll_readout_hw_state(i915);
790 
791 	drm_connector_list_iter_begin(&i915->drm, &conn_iter);
792 	for_each_intel_connector_iter(connector, &conn_iter) {
793 		struct intel_crtc_state *crtc_state = NULL;
794 
795 		if (connector->get_hw_state(connector)) {
796 			struct intel_crtc *crtc;
797 
798 			connector->base.dpms = DRM_MODE_DPMS_ON;
799 
800 			encoder = intel_attached_encoder(connector);
801 			connector->base.encoder = &encoder->base;
802 
803 			crtc = to_intel_crtc(encoder->base.crtc);
804 			crtc_state = crtc ? to_intel_crtc_state(crtc->base.state) : NULL;
805 
806 			if (crtc_state && crtc_state->hw.active) {
807 				/*
808 				 * This has to be done during hardware readout
809 				 * because anything calling .crtc_disable may
810 				 * rely on the connector_mask being accurate.
811 				 */
812 				crtc_state->uapi.connector_mask |=
813 					drm_connector_mask(&connector->base);
814 				crtc_state->uapi.encoder_mask |=
815 					drm_encoder_mask(&encoder->base);
816 			}
817 		} else {
818 			connector->base.dpms = DRM_MODE_DPMS_OFF;
819 			connector->base.encoder = NULL;
820 		}
821 
822 		if (connector->sync_state)
823 			connector->sync_state(connector, crtc_state);
824 
825 		drm_dbg_kms(&i915->drm,
826 			    "[CONNECTOR:%d:%s] hw state readout: %s\n",
827 			    connector->base.base.id, connector->base.name,
828 			    str_enabled_disabled(connector->base.encoder));
829 	}
830 	drm_connector_list_iter_end(&conn_iter);
831 
832 	for_each_intel_crtc(&i915->drm, crtc) {
833 		struct intel_bw_state *bw_state =
834 			to_intel_bw_state(i915->display.bw.obj.state);
835 		struct intel_crtc_state *crtc_state =
836 			to_intel_crtc_state(crtc->base.state);
837 		struct intel_plane *plane;
838 		int min_cdclk = 0;
839 
840 		if (crtc_state->hw.active) {
841 			/*
842 			 * The initial mode needs to be set in order to keep
843 			 * the atomic core happy. It wants a valid mode if the
844 			 * crtc's enabled, so we do the above call.
845 			 *
846 			 * But we don't set all the derived state fully, hence
847 			 * set a flag to indicate that a full recalculation is
848 			 * needed on the next commit.
849 			 */
850 			crtc_state->inherited = true;
851 
852 			intel_crtc_update_active_timings(crtc_state,
853 							 crtc_state->vrr.enable);
854 
855 			intel_crtc_copy_hw_to_uapi_state(crtc_state);
856 		}
857 
858 		for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) {
859 			const struct intel_plane_state *plane_state =
860 				to_intel_plane_state(plane->base.state);
861 
862 			/*
863 			 * FIXME don't have the fb yet, so can't
864 			 * use intel_plane_data_rate() :(
865 			 */
866 			if (plane_state->uapi.visible)
867 				crtc_state->data_rate[plane->id] =
868 					4 * crtc_state->pixel_rate;
869 			/*
870 			 * FIXME don't have the fb yet, so can't
871 			 * use plane->min_cdclk() :(
872 			 */
873 			if (plane_state->uapi.visible && plane->min_cdclk) {
874 				if (crtc_state->double_wide || DISPLAY_VER(i915) >= 10)
875 					crtc_state->min_cdclk[plane->id] =
876 						DIV_ROUND_UP(crtc_state->pixel_rate, 2);
877 				else
878 					crtc_state->min_cdclk[plane->id] =
879 						crtc_state->pixel_rate;
880 			}
881 			drm_dbg_kms(&i915->drm,
882 				    "[PLANE:%d:%s] min_cdclk %d kHz\n",
883 				    plane->base.base.id, plane->base.name,
884 				    crtc_state->min_cdclk[plane->id]);
885 		}
886 
887 		if (crtc_state->hw.active) {
888 			min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
889 			if (drm_WARN_ON(&i915->drm, min_cdclk < 0))
890 				min_cdclk = 0;
891 		}
892 
893 		cdclk_state->min_cdclk[crtc->pipe] = min_cdclk;
894 		cdclk_state->min_voltage_level[crtc->pipe] =
895 			crtc_state->min_voltage_level;
896 
897 		intel_pmdemand_update_port_clock(i915, pmdemand_state, pipe,
898 						 crtc_state->port_clock);
899 
900 		intel_bw_crtc_update(bw_state, crtc_state);
901 	}
902 
903 	intel_pmdemand_init_pmdemand_params(i915, pmdemand_state);
904 }
905 
906 static void
907 get_encoder_power_domains(struct drm_i915_private *i915)
908 {
909 	struct intel_encoder *encoder;
910 
911 	for_each_intel_encoder(&i915->drm, encoder) {
912 		struct intel_crtc_state *crtc_state;
913 
914 		if (!encoder->get_power_domains)
915 			continue;
916 
917 		/*
918 		 * MST-primary and inactive encoders don't have a crtc state
919 		 * and neither of these require any power domain references.
920 		 */
921 		if (!encoder->base.crtc)
922 			continue;
923 
924 		crtc_state = to_intel_crtc_state(encoder->base.crtc->state);
925 		encoder->get_power_domains(encoder, crtc_state);
926 	}
927 }
928 
929 static void intel_early_display_was(struct drm_i915_private *i915)
930 {
931 	/*
932 	 * Display WA #1185 WaDisableDARBFClkGating:glk,icl,ehl,tgl
933 	 * Also known as Wa_14010480278.
934 	 */
935 	if (IS_DISPLAY_VER(i915, 10, 12))
936 		intel_de_rmw(i915, GEN9_CLKGATE_DIS_0, 0, DARBF_GATING_DIS);
937 
938 	/*
939 	 * WaRsPkgCStateDisplayPMReq:hsw
940 	 * System hang if this isn't done before disabling all planes!
941 	 */
942 	if (IS_HASWELL(i915))
943 		intel_de_rmw(i915, CHICKEN_PAR1_1, 0, FORCE_ARB_IDLE_PLANES);
944 
945 	if (IS_KABYLAKE(i915) || IS_COFFEELAKE(i915) || IS_COMETLAKE(i915)) {
946 		/* Display WA #1142:kbl,cfl,cml */
947 		intel_de_rmw(i915, CHICKEN_PAR1_1,
948 			     KBL_ARB_FILL_SPARE_22, KBL_ARB_FILL_SPARE_22);
949 		intel_de_rmw(i915, CHICKEN_MISC_2,
950 			     KBL_ARB_FILL_SPARE_13 | KBL_ARB_FILL_SPARE_14,
951 			     KBL_ARB_FILL_SPARE_14);
952 	}
953 }
954 
955 void intel_modeset_setup_hw_state(struct drm_i915_private *i915,
956 				  struct drm_modeset_acquire_ctx *ctx)
957 {
958 	struct intel_encoder *encoder;
959 	struct intel_crtc *crtc;
960 	intel_wakeref_t wakeref;
961 
962 	wakeref = intel_display_power_get(i915, POWER_DOMAIN_INIT);
963 
964 	intel_early_display_was(i915);
965 	intel_modeset_readout_hw_state(i915);
966 
967 	/* HW state is read out, now we need to sanitize this mess. */
968 	get_encoder_power_domains(i915);
969 
970 	intel_pch_sanitize(i915);
971 
972 	/*
973 	 * intel_sanitize_plane_mapping() may need to do vblank
974 	 * waits, so we need vblank interrupts restored beforehand.
975 	 */
976 	for_each_intel_crtc(&i915->drm, crtc) {
977 		struct intel_crtc_state *crtc_state =
978 			to_intel_crtc_state(crtc->base.state);
979 
980 		intel_sanitize_fifo_underrun_reporting(crtc_state);
981 
982 		drm_crtc_vblank_reset(&crtc->base);
983 
984 		if (crtc_state->hw.active) {
985 			intel_dmc_enable_pipe(i915, crtc->pipe);
986 			intel_crtc_vblank_on(crtc_state);
987 		}
988 	}
989 
990 	intel_fbc_sanitize(i915);
991 
992 	intel_sanitize_plane_mapping(i915);
993 
994 	for_each_intel_encoder(&i915->drm, encoder)
995 		intel_sanitize_encoder(encoder);
996 
997 	/*
998 	 * Sanitizing CRTCs needs their connector atomic state to be
999 	 * up-to-date, so ensure that already here.
1000 	 */
1001 	intel_modeset_update_connector_atomic_state(i915);
1002 
1003 	intel_sanitize_all_crtcs(i915, ctx);
1004 
1005 	intel_dpll_sanitize_state(i915);
1006 
1007 	intel_wm_get_hw_state(i915);
1008 
1009 	for_each_intel_crtc(&i915->drm, crtc) {
1010 		struct intel_crtc_state *crtc_state =
1011 			to_intel_crtc_state(crtc->base.state);
1012 		struct intel_power_domain_mask put_domains;
1013 
1014 		intel_modeset_get_crtc_power_domains(crtc_state, &put_domains);
1015 		if (drm_WARN_ON(&i915->drm, !bitmap_empty(put_domains.bits, POWER_DOMAIN_NUM)))
1016 			intel_modeset_put_crtc_power_domains(crtc, &put_domains);
1017 	}
1018 
1019 	intel_display_power_put(i915, POWER_DOMAIN_INIT, wakeref);
1020 
1021 	intel_power_domains_sanitize_state(i915);
1022 }
1023