1 /* 2 * Copyright © 2014 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 * 23 * Author: Shobhit Kumar <shobhit.kumar@intel.com> 24 * 25 */ 26 27 #include <linux/gpio/consumer.h> 28 #include <linux/gpio/machine.h> 29 #include <linux/mfd/intel_soc_pmic.h> 30 #include <linux/pinctrl/consumer.h> 31 #include <linux/pinctrl/machine.h> 32 #include <linux/slab.h> 33 #include <linux/string_helpers.h> 34 35 #include <asm/unaligned.h> 36 37 #include <drm/drm_crtc.h> 38 #include <drm/drm_edid.h> 39 40 #include <video/mipi_display.h> 41 42 #include "i915_drv.h" 43 #include "i915_reg.h" 44 #include "intel_de.h" 45 #include "intel_display_types.h" 46 #include "intel_dsi.h" 47 #include "intel_dsi_vbt.h" 48 #include "intel_gmbus_regs.h" 49 #include "intel_pps_regs.h" 50 #include "vlv_dsi.h" 51 #include "vlv_dsi_regs.h" 52 #include "vlv_sideband.h" 53 54 #define MIPI_TRANSFER_MODE_SHIFT 0 55 #define MIPI_VIRTUAL_CHANNEL_SHIFT 1 56 #define MIPI_PORT_SHIFT 3 57 58 struct i2c_adapter_lookup { 59 u16 slave_addr; 60 struct intel_dsi *intel_dsi; 61 acpi_handle dev_handle; 62 }; 63 64 #define CHV_GPIO_IDX_START_N 0 65 #define CHV_GPIO_IDX_START_E 73 66 #define CHV_GPIO_IDX_START_SW 100 67 #define CHV_GPIO_IDX_START_SE 198 68 69 /* ICL DSI Display GPIO Pins */ 70 #define ICL_GPIO_DDSP_HPD_A 0 71 #define ICL_GPIO_L_VDDEN_1 1 72 #define ICL_GPIO_L_BKLTEN_1 2 73 #define ICL_GPIO_DDPA_CTRLCLK_1 3 74 #define ICL_GPIO_DDPA_CTRLDATA_1 4 75 #define ICL_GPIO_DDSP_HPD_B 5 76 #define ICL_GPIO_L_VDDEN_2 6 77 #define ICL_GPIO_L_BKLTEN_2 7 78 #define ICL_GPIO_DDPA_CTRLCLK_2 8 79 #define ICL_GPIO_DDPA_CTRLDATA_2 9 80 81 static enum port intel_dsi_seq_port_to_port(struct intel_dsi *intel_dsi, 82 u8 seq_port) 83 { 84 /* 85 * If single link DSI is being used on any port, the VBT sequence block 86 * send packet apparently always has 0 for the port. Just use the port 87 * we have configured, and ignore the sequence block port. 88 */ 89 if (hweight8(intel_dsi->ports) == 1) 90 return ffs(intel_dsi->ports) - 1; 91 92 if (seq_port) { 93 if (intel_dsi->ports & BIT(PORT_B)) 94 return PORT_B; 95 if (intel_dsi->ports & BIT(PORT_C)) 96 return PORT_C; 97 } 98 99 return PORT_A; 100 } 101 102 static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi, 103 const u8 *data) 104 { 105 struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev); 106 struct mipi_dsi_device *dsi_device; 107 u8 type, flags, seq_port; 108 u16 len; 109 enum port port; 110 111 drm_dbg_kms(&dev_priv->drm, "\n"); 112 113 flags = *data++; 114 type = *data++; 115 116 len = *((u16 *) data); 117 data += 2; 118 119 seq_port = (flags >> MIPI_PORT_SHIFT) & 3; 120 121 port = intel_dsi_seq_port_to_port(intel_dsi, seq_port); 122 123 if (drm_WARN_ON(&dev_priv->drm, !intel_dsi->dsi_hosts[port])) 124 goto out; 125 126 dsi_device = intel_dsi->dsi_hosts[port]->device; 127 if (!dsi_device) { 128 drm_dbg_kms(&dev_priv->drm, "no dsi device for port %c\n", 129 port_name(port)); 130 goto out; 131 } 132 133 if ((flags >> MIPI_TRANSFER_MODE_SHIFT) & 1) 134 dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM; 135 else 136 dsi_device->mode_flags |= MIPI_DSI_MODE_LPM; 137 138 dsi_device->channel = (flags >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 3; 139 140 switch (type) { 141 case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: 142 mipi_dsi_generic_write(dsi_device, NULL, 0); 143 break; 144 case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: 145 mipi_dsi_generic_write(dsi_device, data, 1); 146 break; 147 case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: 148 mipi_dsi_generic_write(dsi_device, data, 2); 149 break; 150 case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: 151 case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: 152 case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: 153 drm_dbg(&dev_priv->drm, 154 "Generic Read not yet implemented or used\n"); 155 break; 156 case MIPI_DSI_GENERIC_LONG_WRITE: 157 mipi_dsi_generic_write(dsi_device, data, len); 158 break; 159 case MIPI_DSI_DCS_SHORT_WRITE: 160 mipi_dsi_dcs_write_buffer(dsi_device, data, 1); 161 break; 162 case MIPI_DSI_DCS_SHORT_WRITE_PARAM: 163 mipi_dsi_dcs_write_buffer(dsi_device, data, 2); 164 break; 165 case MIPI_DSI_DCS_READ: 166 drm_dbg(&dev_priv->drm, 167 "DCS Read not yet implemented or used\n"); 168 break; 169 case MIPI_DSI_DCS_LONG_WRITE: 170 mipi_dsi_dcs_write_buffer(dsi_device, data, len); 171 break; 172 } 173 174 if (DISPLAY_VER(dev_priv) < 11) 175 vlv_dsi_wait_for_fifo_empty(intel_dsi, port); 176 177 out: 178 data += len; 179 180 return data; 181 } 182 183 static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data) 184 { 185 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 186 u32 delay = *((const u32 *) data); 187 188 drm_dbg_kms(&i915->drm, "%d usecs\n", delay); 189 190 usleep_range(delay, delay + 10); 191 data += 4; 192 193 return data; 194 } 195 196 static void soc_gpio_set_value(struct intel_connector *connector, u8 gpio_index, 197 const char *con_id, u8 idx, bool value) 198 { 199 struct drm_i915_private *dev_priv = to_i915(connector->base.dev); 200 /* XXX: this table is a quick ugly hack. */ 201 static struct gpio_desc *soc_gpio_table[U8_MAX + 1]; 202 struct gpio_desc *gpio_desc = soc_gpio_table[gpio_index]; 203 204 if (gpio_desc) { 205 gpiod_set_value(gpio_desc, value); 206 } else { 207 gpio_desc = devm_gpiod_get_index(dev_priv->drm.dev, con_id, idx, 208 value ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW); 209 if (IS_ERR(gpio_desc)) { 210 drm_err(&dev_priv->drm, 211 "GPIO index %u request failed (%pe)\n", 212 gpio_index, gpio_desc); 213 return; 214 } 215 216 soc_gpio_table[gpio_index] = gpio_desc; 217 } 218 } 219 220 static void soc_opaque_gpio_set_value(struct intel_connector *connector, 221 u8 gpio_index, const char *chip, 222 const char *con_id, u8 idx, bool value) 223 { 224 struct gpiod_lookup_table *lookup; 225 226 lookup = kzalloc(struct_size(lookup, table, 2), GFP_KERNEL); 227 if (!lookup) 228 return; 229 230 lookup->dev_id = "0000:00:02.0"; 231 lookup->table[0] = 232 GPIO_LOOKUP_IDX(chip, idx, con_id, idx, GPIO_ACTIVE_HIGH); 233 234 gpiod_add_lookup_table(lookup); 235 236 soc_gpio_set_value(connector, gpio_index, con_id, idx, value); 237 238 gpiod_remove_lookup_table(lookup); 239 kfree(lookup); 240 } 241 242 static void vlv_gpio_set_value(struct intel_connector *connector, 243 u8 gpio_source, u8 gpio_index, bool value) 244 { 245 struct drm_i915_private *dev_priv = to_i915(connector->base.dev); 246 247 /* XXX: this assumes vlv_gpio_table only has NC GPIOs. */ 248 if (connector->panel.vbt.dsi.seq_version < 3) { 249 if (gpio_source == 1) { 250 drm_dbg_kms(&dev_priv->drm, "SC gpio not supported\n"); 251 return; 252 } 253 if (gpio_source > 1) { 254 drm_dbg_kms(&dev_priv->drm, 255 "unknown gpio source %u\n", gpio_source); 256 return; 257 } 258 } 259 260 soc_opaque_gpio_set_value(connector, gpio_index, 261 "INT33FC:01", "Panel N", gpio_index, value); 262 } 263 264 static void chv_gpio_set_value(struct intel_connector *connector, 265 u8 gpio_source, u8 gpio_index, bool value) 266 { 267 struct drm_i915_private *dev_priv = to_i915(connector->base.dev); 268 269 if (connector->panel.vbt.dsi.seq_version >= 3) { 270 if (gpio_index >= CHV_GPIO_IDX_START_SE) { 271 /* XXX: it's unclear whether 255->57 is part of SE. */ 272 soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:03", "Panel SE", 273 gpio_index - CHV_GPIO_IDX_START_SE, value); 274 } else if (gpio_index >= CHV_GPIO_IDX_START_SW) { 275 soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:00", "Panel SW", 276 gpio_index - CHV_GPIO_IDX_START_SW, value); 277 } else if (gpio_index >= CHV_GPIO_IDX_START_E) { 278 soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:02", "Panel E", 279 gpio_index - CHV_GPIO_IDX_START_E, value); 280 } else { 281 soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:01", "Panel N", 282 gpio_index - CHV_GPIO_IDX_START_N, value); 283 } 284 } else { 285 /* XXX: The spec is unclear about CHV GPIO on seq v2 */ 286 if (gpio_source != 0) { 287 drm_dbg_kms(&dev_priv->drm, 288 "unknown gpio source %u\n", gpio_source); 289 return; 290 } 291 292 if (gpio_index >= CHV_GPIO_IDX_START_E) { 293 drm_dbg_kms(&dev_priv->drm, 294 "invalid gpio index %u for GPIO N\n", 295 gpio_index); 296 return; 297 } 298 299 soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:01", "Panel N", 300 gpio_index - CHV_GPIO_IDX_START_N, value); 301 } 302 } 303 304 static void bxt_gpio_set_value(struct intel_connector *connector, 305 u8 gpio_index, bool value) 306 { 307 soc_gpio_set_value(connector, gpio_index, NULL, gpio_index, value); 308 } 309 310 enum { 311 MIPI_RESET_1 = 0, 312 MIPI_AVDD_EN_1, 313 MIPI_BKLT_EN_1, 314 MIPI_AVEE_EN_1, 315 MIPI_VIO_EN_1, 316 MIPI_RESET_2, 317 MIPI_AVDD_EN_2, 318 MIPI_BKLT_EN_2, 319 MIPI_AVEE_EN_2, 320 MIPI_VIO_EN_2, 321 }; 322 323 static void icl_native_gpio_set_value(struct drm_i915_private *dev_priv, 324 int gpio, bool value) 325 { 326 int index; 327 328 if (drm_WARN_ON(&dev_priv->drm, DISPLAY_VER(dev_priv) == 11 && gpio >= MIPI_RESET_2)) 329 return; 330 331 switch (gpio) { 332 case MIPI_RESET_1: 333 case MIPI_RESET_2: 334 index = gpio == MIPI_RESET_1 ? HPD_PORT_A : HPD_PORT_B; 335 336 /* 337 * Disable HPD to set the pin to output, and set output 338 * value. The HPD pin should not be enabled for DSI anyway, 339 * assuming the board design and VBT are sane, and the pin isn't 340 * used by a non-DSI encoder. 341 * 342 * The locking protects against concurrent SHOTPLUG_CTL_DDI 343 * modifications in irq setup and handling. 344 */ 345 spin_lock_irq(&dev_priv->irq_lock); 346 intel_de_rmw(dev_priv, SHOTPLUG_CTL_DDI, 347 SHOTPLUG_CTL_DDI_HPD_ENABLE(index) | 348 SHOTPLUG_CTL_DDI_HPD_OUTPUT_DATA(index), 349 value ? SHOTPLUG_CTL_DDI_HPD_OUTPUT_DATA(index) : 0); 350 spin_unlock_irq(&dev_priv->irq_lock); 351 break; 352 case MIPI_AVDD_EN_1: 353 case MIPI_AVDD_EN_2: 354 index = gpio == MIPI_AVDD_EN_1 ? 0 : 1; 355 356 intel_de_rmw(dev_priv, PP_CONTROL(dev_priv, index), PANEL_POWER_ON, 357 value ? PANEL_POWER_ON : 0); 358 break; 359 case MIPI_BKLT_EN_1: 360 case MIPI_BKLT_EN_2: 361 index = gpio == MIPI_BKLT_EN_1 ? 0 : 1; 362 363 intel_de_rmw(dev_priv, PP_CONTROL(dev_priv, index), EDP_BLC_ENABLE, 364 value ? EDP_BLC_ENABLE : 0); 365 break; 366 case MIPI_AVEE_EN_1: 367 case MIPI_AVEE_EN_2: 368 index = gpio == MIPI_AVEE_EN_1 ? 1 : 2; 369 370 intel_de_rmw(dev_priv, GPIO(dev_priv, index), 371 GPIO_CLOCK_VAL_OUT, 372 GPIO_CLOCK_DIR_MASK | GPIO_CLOCK_DIR_OUT | 373 GPIO_CLOCK_VAL_MASK | (value ? GPIO_CLOCK_VAL_OUT : 0)); 374 break; 375 case MIPI_VIO_EN_1: 376 case MIPI_VIO_EN_2: 377 index = gpio == MIPI_VIO_EN_1 ? 1 : 2; 378 379 intel_de_rmw(dev_priv, GPIO(dev_priv, index), 380 GPIO_DATA_VAL_OUT, 381 GPIO_DATA_DIR_MASK | GPIO_DATA_DIR_OUT | 382 GPIO_DATA_VAL_MASK | (value ? GPIO_DATA_VAL_OUT : 0)); 383 break; 384 default: 385 MISSING_CASE(gpio); 386 } 387 } 388 389 static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data) 390 { 391 struct drm_device *dev = intel_dsi->base.base.dev; 392 struct drm_i915_private *i915 = to_i915(dev); 393 struct intel_connector *connector = intel_dsi->attached_connector; 394 u8 gpio_source = 0, gpio_index = 0, gpio_number; 395 bool value; 396 int size; 397 bool native = DISPLAY_VER(i915) >= 11; 398 399 if (connector->panel.vbt.dsi.seq_version >= 3) { 400 size = 3; 401 402 gpio_index = data[0]; 403 gpio_number = data[1]; 404 value = data[2] & BIT(0); 405 406 if (connector->panel.vbt.dsi.seq_version >= 4 && data[2] & BIT(1)) 407 native = false; 408 } else { 409 size = 2; 410 411 gpio_number = data[0]; 412 value = data[1] & BIT(0); 413 414 if (connector->panel.vbt.dsi.seq_version == 2) 415 gpio_source = (data[1] >> 1) & 3; 416 } 417 418 drm_dbg_kms(&i915->drm, "GPIO index %u, number %u, source %u, native %s, set to %s\n", 419 gpio_index, gpio_number, gpio_source, str_yes_no(native), str_on_off(value)); 420 421 if (native) 422 icl_native_gpio_set_value(i915, gpio_number, value); 423 else if (DISPLAY_VER(i915) >= 9) 424 bxt_gpio_set_value(connector, gpio_index, value); 425 else if (IS_VALLEYVIEW(i915)) 426 vlv_gpio_set_value(connector, gpio_source, gpio_number, value); 427 else if (IS_CHERRYVIEW(i915)) 428 chv_gpio_set_value(connector, gpio_source, gpio_number, value); 429 430 return data + size; 431 } 432 433 #ifdef CONFIG_ACPI 434 static int i2c_adapter_lookup(struct acpi_resource *ares, void *data) 435 { 436 struct i2c_adapter_lookup *lookup = data; 437 struct intel_dsi *intel_dsi = lookup->intel_dsi; 438 struct acpi_resource_i2c_serialbus *sb; 439 struct i2c_adapter *adapter; 440 acpi_handle adapter_handle; 441 acpi_status status; 442 443 if (!i2c_acpi_get_i2c_resource(ares, &sb)) 444 return 1; 445 446 if (lookup->slave_addr != sb->slave_address) 447 return 1; 448 449 status = acpi_get_handle(lookup->dev_handle, 450 sb->resource_source.string_ptr, 451 &adapter_handle); 452 if (ACPI_FAILURE(status)) 453 return 1; 454 455 adapter = i2c_acpi_find_adapter_by_handle(adapter_handle); 456 if (adapter) 457 intel_dsi->i2c_bus_num = adapter->nr; 458 459 return 1; 460 } 461 462 static void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, 463 const u16 slave_addr) 464 { 465 struct drm_device *drm_dev = intel_dsi->base.base.dev; 466 struct acpi_device *adev = ACPI_COMPANION(drm_dev->dev); 467 struct i2c_adapter_lookup lookup = { 468 .slave_addr = slave_addr, 469 .intel_dsi = intel_dsi, 470 .dev_handle = acpi_device_handle(adev), 471 }; 472 LIST_HEAD(resource_list); 473 474 acpi_dev_get_resources(adev, &resource_list, i2c_adapter_lookup, &lookup); 475 acpi_dev_free_resource_list(&resource_list); 476 } 477 #else 478 static inline void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, 479 const u16 slave_addr) 480 { 481 } 482 #endif 483 484 static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data) 485 { 486 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 487 struct i2c_adapter *adapter; 488 struct i2c_msg msg; 489 int ret; 490 u8 vbt_i2c_bus_num = *(data + 2); 491 u16 slave_addr = *(u16 *)(data + 3); 492 u8 reg_offset = *(data + 5); 493 u8 payload_size = *(data + 6); 494 u8 *payload_data; 495 496 drm_dbg_kms(&i915->drm, "bus %d client-addr 0x%02x reg 0x%02x data %*ph\n", 497 vbt_i2c_bus_num, slave_addr, reg_offset, payload_size, data + 7); 498 499 if (intel_dsi->i2c_bus_num < 0) { 500 intel_dsi->i2c_bus_num = vbt_i2c_bus_num; 501 i2c_acpi_find_adapter(intel_dsi, slave_addr); 502 } 503 504 adapter = i2c_get_adapter(intel_dsi->i2c_bus_num); 505 if (!adapter) { 506 drm_err(&i915->drm, "Cannot find a valid i2c bus for xfer\n"); 507 goto err_bus; 508 } 509 510 payload_data = kzalloc(payload_size + 1, GFP_KERNEL); 511 if (!payload_data) 512 goto err_alloc; 513 514 payload_data[0] = reg_offset; 515 memcpy(&payload_data[1], (data + 7), payload_size); 516 517 msg.addr = slave_addr; 518 msg.flags = 0; 519 msg.len = payload_size + 1; 520 msg.buf = payload_data; 521 522 ret = i2c_transfer(adapter, &msg, 1); 523 if (ret < 0) 524 drm_err(&i915->drm, 525 "Failed to xfer payload of size (%u) to reg (%u)\n", 526 payload_size, reg_offset); 527 528 kfree(payload_data); 529 err_alloc: 530 i2c_put_adapter(adapter); 531 err_bus: 532 return data + payload_size + 7; 533 } 534 535 static const u8 *mipi_exec_spi(struct intel_dsi *intel_dsi, const u8 *data) 536 { 537 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 538 539 drm_dbg_kms(&i915->drm, "Skipping SPI element execution\n"); 540 541 return data + *(data + 5) + 6; 542 } 543 544 static const u8 *mipi_exec_pmic(struct intel_dsi *intel_dsi, const u8 *data) 545 { 546 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 547 #ifdef CONFIG_PMIC_OPREGION 548 u32 value, mask, reg_address; 549 u16 i2c_address; 550 int ret; 551 552 /* byte 0 aka PMIC Flag is reserved */ 553 i2c_address = get_unaligned_le16(data + 1); 554 reg_address = get_unaligned_le32(data + 3); 555 value = get_unaligned_le32(data + 7); 556 mask = get_unaligned_le32(data + 11); 557 558 ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_address, 559 reg_address, 560 value, mask); 561 if (ret) 562 drm_err(&i915->drm, "%s failed, error: %d\n", __func__, ret); 563 #else 564 drm_err(&i915->drm, 565 "Your hardware requires CONFIG_PMIC_OPREGION and it is not set\n"); 566 #endif 567 568 return data + 15; 569 } 570 571 typedef const u8 * (*fn_mipi_elem_exec)(struct intel_dsi *intel_dsi, 572 const u8 *data); 573 static const fn_mipi_elem_exec exec_elem[] = { 574 [MIPI_SEQ_ELEM_SEND_PKT] = mipi_exec_send_packet, 575 [MIPI_SEQ_ELEM_DELAY] = mipi_exec_delay, 576 [MIPI_SEQ_ELEM_GPIO] = mipi_exec_gpio, 577 [MIPI_SEQ_ELEM_I2C] = mipi_exec_i2c, 578 [MIPI_SEQ_ELEM_SPI] = mipi_exec_spi, 579 [MIPI_SEQ_ELEM_PMIC] = mipi_exec_pmic, 580 }; 581 582 /* 583 * MIPI Sequence from VBT #53 parsing logic 584 * We have already separated each seqence during bios parsing 585 * Following is generic execution function for any sequence 586 */ 587 588 static const char * const seq_name[] = { 589 [MIPI_SEQ_END] = "MIPI_SEQ_END", 590 [MIPI_SEQ_DEASSERT_RESET] = "MIPI_SEQ_DEASSERT_RESET", 591 [MIPI_SEQ_INIT_OTP] = "MIPI_SEQ_INIT_OTP", 592 [MIPI_SEQ_DISPLAY_ON] = "MIPI_SEQ_DISPLAY_ON", 593 [MIPI_SEQ_DISPLAY_OFF] = "MIPI_SEQ_DISPLAY_OFF", 594 [MIPI_SEQ_ASSERT_RESET] = "MIPI_SEQ_ASSERT_RESET", 595 [MIPI_SEQ_BACKLIGHT_ON] = "MIPI_SEQ_BACKLIGHT_ON", 596 [MIPI_SEQ_BACKLIGHT_OFF] = "MIPI_SEQ_BACKLIGHT_OFF", 597 [MIPI_SEQ_TEAR_ON] = "MIPI_SEQ_TEAR_ON", 598 [MIPI_SEQ_TEAR_OFF] = "MIPI_SEQ_TEAR_OFF", 599 [MIPI_SEQ_POWER_ON] = "MIPI_SEQ_POWER_ON", 600 [MIPI_SEQ_POWER_OFF] = "MIPI_SEQ_POWER_OFF", 601 }; 602 603 static const char *sequence_name(enum mipi_seq seq_id) 604 { 605 if (seq_id < ARRAY_SIZE(seq_name)) 606 return seq_name[seq_id]; 607 608 return "(unknown)"; 609 } 610 611 static void intel_dsi_vbt_exec(struct intel_dsi *intel_dsi, 612 enum mipi_seq seq_id) 613 { 614 struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev); 615 struct intel_connector *connector = intel_dsi->attached_connector; 616 const u8 *data; 617 fn_mipi_elem_exec mipi_elem_exec; 618 619 if (drm_WARN_ON(&dev_priv->drm, 620 seq_id >= ARRAY_SIZE(connector->panel.vbt.dsi.sequence))) 621 return; 622 623 data = connector->panel.vbt.dsi.sequence[seq_id]; 624 if (!data) 625 return; 626 627 drm_WARN_ON(&dev_priv->drm, *data != seq_id); 628 629 drm_dbg_kms(&dev_priv->drm, "Starting MIPI sequence %d - %s\n", 630 seq_id, sequence_name(seq_id)); 631 632 /* Skip Sequence Byte. */ 633 data++; 634 635 /* Skip Size of Sequence. */ 636 if (connector->panel.vbt.dsi.seq_version >= 3) 637 data += 4; 638 639 while (*data != MIPI_SEQ_ELEM_END) { 640 u8 operation_byte = *data++; 641 u8 operation_size = 0; 642 643 if (operation_byte < ARRAY_SIZE(exec_elem)) 644 mipi_elem_exec = exec_elem[operation_byte]; 645 else 646 mipi_elem_exec = NULL; 647 648 /* Size of Operation. */ 649 if (connector->panel.vbt.dsi.seq_version >= 3) 650 operation_size = *data++; 651 652 if (mipi_elem_exec) { 653 const u8 *next = data + operation_size; 654 655 data = mipi_elem_exec(intel_dsi, data); 656 657 /* Consistency check if we have size. */ 658 if (operation_size && data != next) { 659 drm_err(&dev_priv->drm, 660 "Inconsistent operation size\n"); 661 return; 662 } 663 } else if (operation_size) { 664 /* We have size, skip. */ 665 drm_dbg_kms(&dev_priv->drm, 666 "Unsupported MIPI operation byte %u\n", 667 operation_byte); 668 data += operation_size; 669 } else { 670 /* No size, can't skip without parsing. */ 671 drm_err(&dev_priv->drm, 672 "Unsupported MIPI operation byte %u\n", 673 operation_byte); 674 return; 675 } 676 } 677 } 678 679 void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi, 680 enum mipi_seq seq_id) 681 { 682 if (seq_id == MIPI_SEQ_POWER_ON && intel_dsi->gpio_panel) 683 gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1); 684 if (seq_id == MIPI_SEQ_BACKLIGHT_ON && intel_dsi->gpio_backlight) 685 gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 1); 686 687 intel_dsi_vbt_exec(intel_dsi, seq_id); 688 689 if (seq_id == MIPI_SEQ_POWER_OFF && intel_dsi->gpio_panel) 690 gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0); 691 if (seq_id == MIPI_SEQ_BACKLIGHT_OFF && intel_dsi->gpio_backlight) 692 gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 0); 693 } 694 695 void intel_dsi_log_params(struct intel_dsi *intel_dsi) 696 { 697 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 698 699 drm_dbg_kms(&i915->drm, "Pclk %d\n", intel_dsi->pclk); 700 drm_dbg_kms(&i915->drm, "Pixel overlap %d\n", 701 intel_dsi->pixel_overlap); 702 drm_dbg_kms(&i915->drm, "Lane count %d\n", intel_dsi->lane_count); 703 drm_dbg_kms(&i915->drm, "DPHY param reg 0x%x\n", intel_dsi->dphy_reg); 704 drm_dbg_kms(&i915->drm, "Video mode format %s\n", 705 intel_dsi->video_mode == NON_BURST_SYNC_PULSE ? 706 "non-burst with sync pulse" : 707 intel_dsi->video_mode == NON_BURST_SYNC_EVENTS ? 708 "non-burst with sync events" : 709 intel_dsi->video_mode == BURST_MODE ? 710 "burst" : "<unknown>"); 711 drm_dbg_kms(&i915->drm, "Burst mode ratio %d\n", 712 intel_dsi->burst_mode_ratio); 713 drm_dbg_kms(&i915->drm, "Reset timer %d\n", intel_dsi->rst_timer_val); 714 drm_dbg_kms(&i915->drm, "Eot %s\n", 715 str_enabled_disabled(intel_dsi->eotp_pkt)); 716 drm_dbg_kms(&i915->drm, "Clockstop %s\n", 717 str_enabled_disabled(!intel_dsi->clock_stop)); 718 drm_dbg_kms(&i915->drm, "Mode %s\n", 719 intel_dsi->operation_mode ? "command" : "video"); 720 if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) 721 drm_dbg_kms(&i915->drm, 722 "Dual link: DSI_DUAL_LINK_FRONT_BACK\n"); 723 else if (intel_dsi->dual_link == DSI_DUAL_LINK_PIXEL_ALT) 724 drm_dbg_kms(&i915->drm, 725 "Dual link: DSI_DUAL_LINK_PIXEL_ALT\n"); 726 else 727 drm_dbg_kms(&i915->drm, "Dual link: NONE\n"); 728 drm_dbg_kms(&i915->drm, "Pixel Format %d\n", intel_dsi->pixel_format); 729 drm_dbg_kms(&i915->drm, "TLPX %d\n", intel_dsi->escape_clk_div); 730 drm_dbg_kms(&i915->drm, "LP RX Timeout 0x%x\n", 731 intel_dsi->lp_rx_timeout); 732 drm_dbg_kms(&i915->drm, "Turnaround Timeout 0x%x\n", 733 intel_dsi->turn_arnd_val); 734 drm_dbg_kms(&i915->drm, "Init Count 0x%x\n", intel_dsi->init_count); 735 drm_dbg_kms(&i915->drm, "HS to LP Count 0x%x\n", 736 intel_dsi->hs_to_lp_count); 737 drm_dbg_kms(&i915->drm, "LP Byte Clock %d\n", intel_dsi->lp_byte_clk); 738 drm_dbg_kms(&i915->drm, "DBI BW Timer 0x%x\n", intel_dsi->bw_timer); 739 drm_dbg_kms(&i915->drm, "LP to HS Clock Count 0x%x\n", 740 intel_dsi->clk_lp_to_hs_count); 741 drm_dbg_kms(&i915->drm, "HS to LP Clock Count 0x%x\n", 742 intel_dsi->clk_hs_to_lp_count); 743 drm_dbg_kms(&i915->drm, "BTA %s\n", 744 str_enabled_disabled(!(intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA))); 745 } 746 747 bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id) 748 { 749 struct drm_device *dev = intel_dsi->base.base.dev; 750 struct drm_i915_private *dev_priv = to_i915(dev); 751 struct intel_connector *connector = intel_dsi->attached_connector; 752 struct mipi_config *mipi_config = connector->panel.vbt.dsi.config; 753 struct mipi_pps_data *pps = connector->panel.vbt.dsi.pps; 754 struct drm_display_mode *mode = connector->panel.vbt.lfp_vbt_mode; 755 u16 burst_mode_ratio; 756 enum port port; 757 758 drm_dbg_kms(&dev_priv->drm, "\n"); 759 760 intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1; 761 intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0; 762 intel_dsi->lane_count = mipi_config->lane_cnt + 1; 763 intel_dsi->pixel_format = 764 pixel_format_from_register_bits( 765 mipi_config->videomode_color_format << 7); 766 767 intel_dsi->dual_link = mipi_config->dual_link; 768 intel_dsi->pixel_overlap = mipi_config->pixel_overlap; 769 intel_dsi->operation_mode = mipi_config->is_cmd_mode; 770 intel_dsi->video_mode = mipi_config->video_transfer_mode; 771 intel_dsi->escape_clk_div = mipi_config->byte_clk_sel; 772 intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout; 773 intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout; 774 intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout; 775 intel_dsi->rst_timer_val = mipi_config->device_reset_timer; 776 intel_dsi->init_count = mipi_config->master_init_timer; 777 intel_dsi->bw_timer = mipi_config->dbi_bw_timer; 778 intel_dsi->video_frmt_cfg_bits = 779 mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0; 780 intel_dsi->bgr_enabled = mipi_config->rgb_flip; 781 782 /* Starting point, adjusted depending on dual link and burst mode */ 783 intel_dsi->pclk = mode->clock; 784 785 /* In dual link mode each port needs half of pixel clock */ 786 if (intel_dsi->dual_link) { 787 intel_dsi->pclk /= 2; 788 789 /* we can enable pixel_overlap if needed by panel. In this 790 * case we need to increase the pixelclock for extra pixels 791 */ 792 if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) { 793 intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000); 794 } 795 } 796 797 /* Burst Mode Ratio 798 * Target ddr frequency from VBT / non burst ddr freq 799 * multiply by 100 to preserve remainder 800 */ 801 if (intel_dsi->video_mode == BURST_MODE) { 802 u32 bitrate; 803 804 if (mipi_config->target_burst_mode_freq == 0) { 805 drm_err(&dev_priv->drm, "Burst mode target is not set\n"); 806 return false; 807 } 808 809 bitrate = intel_dsi_bitrate(intel_dsi); 810 811 /* 812 * Sometimes the VBT contains a slightly lower clock, then 813 * the bitrate we have calculated, in this case just replace it 814 * with the calculated bitrate. 815 */ 816 if (mipi_config->target_burst_mode_freq < bitrate && 817 intel_fuzzy_clock_check(mipi_config->target_burst_mode_freq, 818 bitrate)) 819 mipi_config->target_burst_mode_freq = bitrate; 820 821 if (mipi_config->target_burst_mode_freq < bitrate) { 822 drm_err(&dev_priv->drm, "Burst mode freq is less than computed\n"); 823 return false; 824 } 825 826 burst_mode_ratio = 827 DIV_ROUND_UP(mipi_config->target_burst_mode_freq * 100, bitrate); 828 829 intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100); 830 } else 831 burst_mode_ratio = 100; 832 833 intel_dsi->burst_mode_ratio = burst_mode_ratio; 834 835 /* delays in VBT are in unit of 100us, so need to convert 836 * here in ms 837 * Delay (100us) * 100 /1000 = Delay / 10 (ms) */ 838 intel_dsi->backlight_off_delay = pps->bl_disable_delay / 10; 839 intel_dsi->backlight_on_delay = pps->bl_enable_delay / 10; 840 intel_dsi->panel_on_delay = pps->panel_on_delay / 10; 841 intel_dsi->panel_off_delay = pps->panel_off_delay / 10; 842 intel_dsi->panel_pwr_cycle_delay = pps->panel_power_cycle_delay / 10; 843 844 intel_dsi->i2c_bus_num = -1; 845 846 /* a regular driver would get the device in probe */ 847 for_each_dsi_port(port, intel_dsi->ports) { 848 mipi_dsi_attach(intel_dsi->dsi_hosts[port]->device); 849 } 850 851 return true; 852 } 853 854 /* 855 * On some BYT/CHT devs some sequences are incomplete and we need to manually 856 * control some GPIOs. We need to add a GPIO lookup table before we get these. 857 * If the GOP did not initialize the panel (HDMI inserted) we may need to also 858 * change the pinmux for the SoC's PWM0 pin from GPIO to PWM. 859 */ 860 static struct gpiod_lookup_table pmic_panel_gpio_table = { 861 /* Intel GFX is consumer */ 862 .dev_id = "0000:00:02.0", 863 .table = { 864 /* Panel EN/DISABLE */ 865 GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH), 866 { } 867 }, 868 }; 869 870 static struct gpiod_lookup_table soc_panel_gpio_table = { 871 .dev_id = "0000:00:02.0", 872 .table = { 873 GPIO_LOOKUP("INT33FC:01", 10, "backlight", GPIO_ACTIVE_HIGH), 874 GPIO_LOOKUP("INT33FC:01", 11, "panel", GPIO_ACTIVE_HIGH), 875 { } 876 }, 877 }; 878 879 static const struct pinctrl_map soc_pwm_pinctrl_map[] = { 880 PIN_MAP_MUX_GROUP("0000:00:02.0", "soc_pwm0", "INT33FC:00", 881 "pwm0_grp", "pwm"), 882 }; 883 884 void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on) 885 { 886 struct drm_device *dev = intel_dsi->base.base.dev; 887 struct drm_i915_private *dev_priv = to_i915(dev); 888 struct intel_connector *connector = intel_dsi->attached_connector; 889 struct mipi_config *mipi_config = connector->panel.vbt.dsi.config; 890 enum gpiod_flags flags = panel_is_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; 891 struct gpiod_lookup_table *gpiod_lookup_table = NULL; 892 bool want_backlight_gpio = false; 893 bool want_panel_gpio = false; 894 struct pinctrl *pinctrl; 895 int ret; 896 897 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && 898 mipi_config->pwm_blc == PPS_BLC_PMIC) { 899 gpiod_lookup_table = &pmic_panel_gpio_table; 900 want_panel_gpio = true; 901 } 902 903 if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) { 904 gpiod_lookup_table = &soc_panel_gpio_table; 905 want_panel_gpio = true; 906 want_backlight_gpio = true; 907 908 /* Ensure PWM0 pin is muxed as PWM instead of GPIO */ 909 ret = pinctrl_register_mappings(soc_pwm_pinctrl_map, 910 ARRAY_SIZE(soc_pwm_pinctrl_map)); 911 if (ret) 912 drm_err(&dev_priv->drm, 913 "Failed to register pwm0 pinmux mapping\n"); 914 915 pinctrl = devm_pinctrl_get_select(dev->dev, "soc_pwm0"); 916 if (IS_ERR(pinctrl)) 917 drm_err(&dev_priv->drm, 918 "Failed to set pinmux to PWM\n"); 919 } 920 921 if (gpiod_lookup_table) 922 gpiod_add_lookup_table(gpiod_lookup_table); 923 924 if (want_panel_gpio) { 925 intel_dsi->gpio_panel = devm_gpiod_get(dev->dev, "panel", flags); 926 if (IS_ERR(intel_dsi->gpio_panel)) { 927 drm_err(&dev_priv->drm, 928 "Failed to own gpio for panel control\n"); 929 intel_dsi->gpio_panel = NULL; 930 } 931 } 932 933 if (want_backlight_gpio) { 934 intel_dsi->gpio_backlight = 935 devm_gpiod_get(dev->dev, "backlight", flags); 936 if (IS_ERR(intel_dsi->gpio_backlight)) { 937 drm_err(&dev_priv->drm, 938 "Failed to own gpio for backlight control\n"); 939 intel_dsi->gpio_backlight = NULL; 940 } 941 } 942 943 if (gpiod_lookup_table) 944 gpiod_remove_lookup_table(gpiod_lookup_table); 945 } 946