xref: /linux/drivers/gpu/drm/i915/Kconfig.debug (revision ef9226cd56b718c79184a3466d32984a51cb449c)
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_I915_WERROR
3	bool "Force GCC to throw an error instead of a warning when compiling"
4	# As this may inadvertently break the build, only allow the user
5	# to shoot oneself in the foot iff they aim really hard
6	depends on EXPERT
7	# We use the dependency on !COMPILE_TEST to not be enabled in
8	# allmodconfig or allyesconfig configurations
9	depends on !COMPILE_TEST
10	default n
11	help
12	  Add -Werror to the build flags for (and only for) i915.ko.
13	  Do not enable this unless you are writing code for the i915.ko module.
14
15	  Recommended for driver developers only.
16
17	  If in doubt, say "N".
18
19config DRM_I915_DEBUG
20	bool "Enable additional driver debugging"
21	depends on DRM_I915
22	depends on EXPERT # only for developers
23	depends on !COMPILE_TEST # never built by robots
24	select DEBUG_FS
25	select PREEMPT_COUNT
26	select I2C_CHARDEV
27	select REF_TRACKER
28	select STACKDEPOT
29	select STACKTRACE
30	select DRM_DP_AUX_CHARDEV
31	select DRM_DISPLAY_DEBUG_DP_TUNNEL_STATE if DRM_I915_DP_TUNNEL
32	select X86_MSR # used by igt/pm_rpm
33	select DRM_VGEM # used by igt/prime_vgem (dmabuf interop checks)
34	select DRM_DEBUG_MM if DRM=y
35	select DRM_EXPORT_FOR_TESTS if m
36	select DRM_DEBUG_SELFTEST
37	select DMABUF_SELFTESTS
38	select SW_SYNC # signaling validation framework (igt/syncobj*)
39	select DRM_I915_WERROR
40	select DRM_I915_DEBUG_GEM
41	select DRM_I915_DEBUG_GEM_ONCE
42	select DRM_I915_DEBUG_MMIO
43	select DRM_I915_DEBUG_RUNTIME_PM
44	select DRM_I915_DEBUG_WAKEREF
45	select DRM_I915_SW_FENCE_DEBUG_OBJECTS
46	select DRM_I915_SELFTEST
47	default n
48	help
49	  Choose this option to turn on extra driver debugging that may affect
50	  performance but will catch some internal issues.
51
52	  Recommended for driver developers only.
53
54	  If in doubt, say "N".
55
56config DRM_I915_DEBUG_MMIO
57	bool "Always insert extra checks around mmio access by default"
58	default n
59	help
60	  By default, always enables the extra sanity checks (extra register
61	  reads) around every mmio (register) access that will slow the system
62	  down. This sets the default value of i915.mmio_debug to -1 and can
63	  be overridden at module load.
64
65	  Recommended for driver developers only.
66
67	  If in doubt, say "N".
68
69config DRM_I915_DEBUG_GEM
70	bool "Insert extra checks into the GEM internals"
71	default n
72	depends on DRM_I915_WERROR
73	help
74	  Enable extra sanity checks (including BUGs) along the GEM driver
75	  paths that may slow the system down and if hit hang the machine.
76
77	  Recommended for driver developers only.
78
79	  If in doubt, say "N".
80
81config DRM_I915_DEBUG_GEM_ONCE
82	bool "Make a GEM debug failure fatal"
83	default n
84	depends on DRM_I915_DEBUG_GEM
85	help
86	  During development, we often only want the very first failure
87	  as that would otherwise be lost in the deluge of subsequent
88	  failures. However, more casual testers may not want to trigger
89	  a hard BUG_ON and hope that the system remains sufficiently usable
90	  to capture a bug report in situ.
91
92	  Recommended for driver developers only.
93
94	  If in doubt, say "N".
95
96config DRM_I915_ERRLOG_GEM
97	bool "Insert extra logging (very verbose) for common GEM errors"
98	default n
99	depends on DRM_I915_DEBUG_GEM
100	help
101	  Enable additional logging that may help track down the cause of
102	  principally userspace errors.
103
104	  Recommended for driver developers only.
105
106	  If in doubt, say "N".
107
108config DRM_I915_TRACE_GEM
109	bool "Insert extra ftrace output from the GEM internals"
110	depends on DRM_I915_DEBUG_GEM
111	select TRACING
112	default n
113	help
114	  Enable additional and verbose debugging output that will spam
115	  ordinary tests, but may be vital for post-mortem debugging when
116	  used with /proc/sys/kernel/ftrace_dump_on_oops
117
118	  Recommended for driver developers only.
119
120	  If in doubt, say "N".
121
122config DRM_I915_TRACE_GTT
123	bool "Insert extra ftrace output from the GTT internals"
124	depends on DRM_I915_DEBUG_GEM
125	select TRACING
126	default n
127	help
128	  Enable additional and verbose debugging output that will spam
129	  ordinary tests, but may be vital for post-mortem debugging when
130	  used with /proc/sys/kernel/ftrace_dump_on_oops
131
132	  Recommended for driver developers only.
133
134	  If in doubt, say "N".
135
136config DRM_I915_SW_FENCE_DEBUG_OBJECTS
137	bool "Enable additional driver debugging for fence objects"
138	depends on DRM_I915
139	select DEBUG_OBJECTS
140	default n
141	help
142	  Choose this option to turn on extra driver debugging that may affect
143	  performance but will catch some internal issues.
144
145	  Recommended for driver developers only.
146
147	  If in doubt, say "N".
148
149config DRM_I915_SW_FENCE_CHECK_DAG
150	bool "Enable additional driver debugging for detecting dependency cycles"
151	depends on DRM_I915
152	default n
153	help
154	  Choose this option to turn on extra driver debugging that may affect
155	  performance but will catch some internal issues.
156
157	  Recommended for driver developers only.
158
159	  If in doubt, say "N".
160
161config DRM_I915_DEBUG_GUC
162	bool "Enable additional driver debugging for GuC"
163	depends on DRM_I915
164	select STACKDEPOT
165	default n
166	help
167	  Choose this option to turn on extra driver debugging that may affect
168	  performance but will help resolve GuC related issues.
169
170	  Recommended for driver developers only.
171
172	  If in doubt, say "N".
173
174config DRM_I915_SELFTEST
175	bool "Enable selftests upon driver load"
176	depends on DRM_I915
177	default n
178	select DRM_EXPORT_FOR_TESTS if m
179	select FAULT_INJECTION
180	select PRIME_NUMBERS
181	select CRC32
182	help
183	  Choose this option to allow the driver to perform selftests upon
184	  loading; also requires the i915.selftest=1 module parameter. To
185	  exit the module after running the selftests (i.e. to prevent normal
186	  module initialisation afterwards) use i915.selftest=-1.
187
188	  Recommended for driver developers only.
189
190	  If in doubt, say "N".
191
192config DRM_I915_SELFTEST_BROKEN
193	bool "Enable broken and dangerous selftests"
194	depends on DRM_I915_SELFTEST
195	depends on BROKEN
196	default n
197	help
198	  This option enables the execution of selftests that are "dangerous"
199	  and may trigger unintended HW side-effects as they break strict
200	  rules given in the HW specification. For science.
201
202	  Recommended for masochistic driver developers only.
203
204	  If in doubt, say "N".
205
206config DRM_I915_LOW_LEVEL_TRACEPOINTS
207	bool "Enable low level request tracing events"
208	depends on DRM_I915
209	default n
210	help
211	  Choose this option to turn on low level request tracing events.
212	  This provides the ability to precisely monitor engine utilisation
213	  and also analyze the request dependency resolving timeline.
214
215	  Recommended for driver developers only.
216
217	  If in doubt, say "N".
218
219config DRM_I915_DEBUG_VBLANK_EVADE
220	bool "Enable extra debug warnings for vblank evasion"
221	depends on DRM_I915
222	default n
223	help
224	  Choose this option to turn on extra debug warnings for the
225	  vblank evade mechanism. This gives a warning every time the
226	  the deadline allotted for the vblank evade critical section
227	  is exceeded, even if there isn't an actual risk of missing
228	  the vblank.
229
230	  Recommended for driver developers only.
231
232	  If in doubt, say "N".
233
234config DRM_I915_DEBUG_RUNTIME_PM
235	bool "Enable extra state checking for runtime PM"
236	depends on DRM_I915
237	default n
238	select REF_TRACKER
239	select STACKDEPOT
240	select STACKTRACE
241	help
242	  Choose this option to turn on extra state checking for the
243	  runtime PM functionality. This may introduce overhead during
244	  driver loading, suspend and resume operations.
245
246	  Recommended for driver developers only.
247
248	  If in doubt, say "N"
249
250config DRM_I915_DEBUG_WAKEREF
251	bool "Enable extra tracking for wakerefs"
252	depends on DRM_I915
253	select REF_TRACKER
254	select STACKDEPOT
255	select STACKTRACE
256	help
257	  Choose this option to turn on extra state checking and usage
258	  tracking for the wakerefPM functionality. This may introduce
259	  overhead during driver runtime.
260
261	  If in doubt, say "N"
262