1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright © 2006-2007 Intel Corporation 4 * 5 * Authors: 6 * Eric Anholt <eric@anholt.net> 7 * Dave Airlie <airlied@linux.ie> 8 * Jesse Barnes <jesse.barnes@intel.com> 9 */ 10 11 #include <linux/i2c.h> 12 #include <linux/pm_runtime.h> 13 14 #include <drm/drm_crtc_helper.h> 15 #include <drm/drm_modeset_helper_vtables.h> 16 #include <drm/drm_print.h> 17 #include <drm/drm_simple_kms_helper.h> 18 19 #include "intel_bios.h" 20 #include "power.h" 21 #include "psb_drv.h" 22 #include "psb_intel_drv.h" 23 #include "psb_intel_reg.h" 24 25 /* 26 * LVDS I2C backlight control macros 27 */ 28 #define BRIGHTNESS_MAX_LEVEL 100 29 #define BRIGHTNESS_MASK 0xFF 30 #define BLC_I2C_TYPE 0x01 31 #define BLC_PWM_TYPT 0x02 32 33 #define BLC_POLARITY_NORMAL 0 34 #define BLC_POLARITY_INVERSE 1 35 36 #define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE) 37 #define PSB_BLC_MIN_PWM_REG_FREQ (0x2) 38 #define PSB_BLC_PWM_PRECISION_FACTOR (10) 39 #define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) 40 #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) 41 42 struct psb_intel_lvds_priv { 43 /* 44 * Saved LVDO output states 45 */ 46 uint32_t savePP_ON; 47 uint32_t savePP_OFF; 48 uint32_t saveLVDS; 49 uint32_t savePP_CONTROL; 50 uint32_t savePP_CYCLE; 51 uint32_t savePFIT_CONTROL; 52 uint32_t savePFIT_PGM_RATIOS; 53 uint32_t saveBLC_PWM_CTL; 54 55 struct gma_i2c_chan *i2c_bus; 56 }; 57 58 59 /* 60 * Returns the maximum level of the backlight duty cycle field. 61 */ 62 static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev) 63 { 64 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 65 u32 ret; 66 67 if (gma_power_begin(dev, false)) { 68 ret = REG_READ(BLC_PWM_CTL); 69 gma_power_end(dev); 70 } else /* Powered off, use the saved value */ 71 ret = dev_priv->regs.saveBLC_PWM_CTL; 72 73 /* Top 15bits hold the frequency mask */ 74 ret = (ret & BACKLIGHT_MODULATION_FREQ_MASK) >> 75 BACKLIGHT_MODULATION_FREQ_SHIFT; 76 77 ret *= 2; /* Return a 16bit range as needed for setting */ 78 if (ret == 0) 79 dev_err(dev->dev, "BL bug: Reg %08x save %08X\n", 80 REG_READ(BLC_PWM_CTL), dev_priv->regs.saveBLC_PWM_CTL); 81 return ret; 82 } 83 84 /* 85 * Set LVDS backlight level by I2C command 86 * 87 * FIXME: at some point we need to both track this for PM and also 88 * disable runtime pm on MRST if the brightness is nil (ie blanked) 89 */ 90 static int psb_lvds_i2c_set_brightness(struct drm_device *dev, 91 unsigned int level) 92 { 93 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 94 95 struct gma_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus; 96 u8 out_buf[2]; 97 unsigned int blc_i2c_brightness; 98 99 struct i2c_msg msgs[] = { 100 { 101 .addr = lvds_i2c_bus->target_addr, 102 .flags = 0, 103 .len = 2, 104 .buf = out_buf, 105 } 106 }; 107 108 blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level * 109 BRIGHTNESS_MASK / 110 BRIGHTNESS_MAX_LEVEL); 111 112 if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) 113 blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness; 114 115 out_buf[0] = dev_priv->lvds_bl->brightnesscmd; 116 out_buf[1] = (u8)blc_i2c_brightness; 117 118 if (i2c_transfer(&lvds_i2c_bus->base, msgs, 1) == 1) { 119 dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n", 120 dev_priv->lvds_bl->brightnesscmd, 121 blc_i2c_brightness); 122 return 0; 123 } 124 125 dev_err(dev->dev, "I2C transfer error\n"); 126 return -1; 127 } 128 129 130 static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level) 131 { 132 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 133 134 u32 max_pwm_blc; 135 u32 blc_pwm_duty_cycle; 136 137 max_pwm_blc = psb_intel_lvds_get_max_backlight(dev); 138 139 /*BLC_PWM_CTL Should be initiated while backlight device init*/ 140 BUG_ON(max_pwm_blc == 0); 141 142 blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL; 143 144 if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) 145 blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle; 146 147 blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR; 148 REG_WRITE(BLC_PWM_CTL, 149 (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) | 150 (blc_pwm_duty_cycle)); 151 152 dev_info(dev->dev, "Backlight lvds set brightness %08x\n", 153 (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) | 154 (blc_pwm_duty_cycle)); 155 156 return 0; 157 } 158 159 /* 160 * Set LVDS backlight level either by I2C or PWM 161 */ 162 void psb_intel_lvds_set_brightness(struct drm_device *dev, int level) 163 { 164 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 165 166 dev_dbg(dev->dev, "backlight level is %d\n", level); 167 168 if (!dev_priv->lvds_bl) { 169 dev_err(dev->dev, "NO LVDS backlight info\n"); 170 return; 171 } 172 173 if (dev_priv->lvds_bl->type == BLC_I2C_TYPE) 174 psb_lvds_i2c_set_brightness(dev, level); 175 else 176 psb_lvds_pwm_set_brightness(dev, level); 177 } 178 179 /* 180 * Sets the backlight level. 181 * 182 * level: backlight level, from 0 to psb_intel_lvds_get_max_backlight(). 183 */ 184 static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level) 185 { 186 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 187 u32 blc_pwm_ctl; 188 189 if (gma_power_begin(dev, false)) { 190 blc_pwm_ctl = REG_READ(BLC_PWM_CTL); 191 blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK; 192 REG_WRITE(BLC_PWM_CTL, 193 (blc_pwm_ctl | 194 (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); 195 dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl | 196 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); 197 gma_power_end(dev); 198 } else { 199 blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL & 200 ~BACKLIGHT_DUTY_CYCLE_MASK; 201 dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl | 202 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); 203 } 204 } 205 206 /* 207 * Sets the power state for the panel. 208 */ 209 static void psb_intel_lvds_set_power(struct drm_device *dev, bool on) 210 { 211 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 212 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 213 u32 pp_status; 214 215 if (!gma_power_begin(dev, true)) { 216 dev_err(dev->dev, "set power, chip off!\n"); 217 return; 218 } 219 220 if (on) { 221 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | 222 POWER_TARGET_ON); 223 do { 224 pp_status = REG_READ(PP_STATUS); 225 } while ((pp_status & PP_ON) == 0); 226 227 psb_intel_lvds_set_backlight(dev, 228 mode_dev->backlight_duty_cycle); 229 } else { 230 psb_intel_lvds_set_backlight(dev, 0); 231 232 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & 233 ~POWER_TARGET_ON); 234 do { 235 pp_status = REG_READ(PP_STATUS); 236 } while (pp_status & PP_ON); 237 } 238 239 gma_power_end(dev); 240 } 241 242 static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode) 243 { 244 struct drm_device *dev = encoder->dev; 245 246 if (mode == DRM_MODE_DPMS_ON) 247 psb_intel_lvds_set_power(dev, true); 248 else 249 psb_intel_lvds_set_power(dev, false); 250 251 /* XXX: We never power down the LVDS pairs. */ 252 } 253 254 static void psb_intel_lvds_save(struct drm_connector *connector) 255 { 256 struct drm_device *dev = connector->dev; 257 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 258 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 259 struct psb_intel_lvds_priv *lvds_priv = 260 (struct psb_intel_lvds_priv *)gma_encoder->dev_priv; 261 262 lvds_priv->savePP_ON = REG_READ(LVDSPP_ON); 263 lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF); 264 lvds_priv->saveLVDS = REG_READ(LVDS); 265 lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL); 266 lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE); 267 /*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/ 268 lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); 269 lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL); 270 lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS); 271 272 /*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/ 273 dev_priv->backlight_duty_cycle = (dev_priv->regs.saveBLC_PWM_CTL & 274 BACKLIGHT_DUTY_CYCLE_MASK); 275 276 /* 277 * If the light is off at server startup, 278 * just make it full brightness 279 */ 280 if (dev_priv->backlight_duty_cycle == 0) 281 dev_priv->backlight_duty_cycle = 282 psb_intel_lvds_get_max_backlight(dev); 283 284 dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n", 285 lvds_priv->savePP_ON, 286 lvds_priv->savePP_OFF, 287 lvds_priv->saveLVDS, 288 lvds_priv->savePP_CONTROL, 289 lvds_priv->savePP_CYCLE, 290 lvds_priv->saveBLC_PWM_CTL); 291 } 292 293 static void psb_intel_lvds_restore(struct drm_connector *connector) 294 { 295 struct drm_device *dev = connector->dev; 296 u32 pp_status; 297 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 298 struct psb_intel_lvds_priv *lvds_priv = 299 (struct psb_intel_lvds_priv *)gma_encoder->dev_priv; 300 301 dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n", 302 lvds_priv->savePP_ON, 303 lvds_priv->savePP_OFF, 304 lvds_priv->saveLVDS, 305 lvds_priv->savePP_CONTROL, 306 lvds_priv->savePP_CYCLE, 307 lvds_priv->saveBLC_PWM_CTL); 308 309 REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL); 310 REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL); 311 REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS); 312 REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON); 313 REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF); 314 /*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/ 315 REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE); 316 REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL); 317 REG_WRITE(LVDS, lvds_priv->saveLVDS); 318 319 if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) { 320 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | 321 POWER_TARGET_ON); 322 do { 323 pp_status = REG_READ(PP_STATUS); 324 } while ((pp_status & PP_ON) == 0); 325 } else { 326 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & 327 ~POWER_TARGET_ON); 328 do { 329 pp_status = REG_READ(PP_STATUS); 330 } while (pp_status & PP_ON); 331 } 332 } 333 334 enum drm_mode_status psb_intel_lvds_mode_valid(struct drm_connector *connector, 335 const struct drm_display_mode *mode) 336 { 337 struct drm_psb_private *dev_priv = to_drm_psb_private(connector->dev); 338 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 339 struct drm_display_mode *fixed_mode = 340 dev_priv->mode_dev.panel_fixed_mode; 341 342 if (gma_encoder->type == INTEL_OUTPUT_MIPI2) 343 fixed_mode = dev_priv->mode_dev.panel_fixed_mode2; 344 345 /* just in case */ 346 if (mode->flags & DRM_MODE_FLAG_DBLSCAN) 347 return MODE_NO_DBLESCAN; 348 349 /* just in case */ 350 if (mode->flags & DRM_MODE_FLAG_INTERLACE) 351 return MODE_NO_INTERLACE; 352 353 if (fixed_mode) { 354 if (mode->hdisplay > fixed_mode->hdisplay) 355 return MODE_PANEL; 356 if (mode->vdisplay > fixed_mode->vdisplay) 357 return MODE_PANEL; 358 } 359 return MODE_OK; 360 } 361 362 bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder, 363 const struct drm_display_mode *mode, 364 struct drm_display_mode *adjusted_mode) 365 { 366 struct drm_device *dev = encoder->dev; 367 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 368 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 369 struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc); 370 struct drm_encoder *tmp_encoder; 371 struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode; 372 struct gma_encoder *gma_encoder = to_gma_encoder(encoder); 373 374 if (gma_encoder->type == INTEL_OUTPUT_MIPI2) 375 panel_fixed_mode = mode_dev->panel_fixed_mode2; 376 377 /* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */ 378 if (!IS_MRST(dev) && gma_crtc->pipe == 0) { 379 pr_err("Can't support LVDS on pipe A\n"); 380 return false; 381 } 382 if (IS_MRST(dev) && gma_crtc->pipe != 0) { 383 pr_err("Must use PIPE A\n"); 384 return false; 385 } 386 /* Should never happen!! */ 387 list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, 388 head) { 389 if (tmp_encoder != encoder 390 && tmp_encoder->crtc == encoder->crtc) { 391 pr_err("Can't enable LVDS and another encoder on the same pipe\n"); 392 return false; 393 } 394 } 395 396 /* 397 * If we have timings from the BIOS for the panel, put them in 398 * to the adjusted mode. The CRTC will be set up for this mode, 399 * with the panel scaling set up to source from the H/VDisplay 400 * of the original mode. 401 */ 402 if (panel_fixed_mode != NULL) { 403 adjusted_mode->hdisplay = panel_fixed_mode->hdisplay; 404 adjusted_mode->hsync_start = panel_fixed_mode->hsync_start; 405 adjusted_mode->hsync_end = panel_fixed_mode->hsync_end; 406 adjusted_mode->htotal = panel_fixed_mode->htotal; 407 adjusted_mode->vdisplay = panel_fixed_mode->vdisplay; 408 adjusted_mode->vsync_start = panel_fixed_mode->vsync_start; 409 adjusted_mode->vsync_end = panel_fixed_mode->vsync_end; 410 adjusted_mode->vtotal = panel_fixed_mode->vtotal; 411 adjusted_mode->clock = panel_fixed_mode->clock; 412 drm_mode_set_crtcinfo(adjusted_mode, 413 CRTC_INTERLACE_HALVE_V); 414 } 415 416 /* 417 * XXX: It would be nice to support lower refresh rates on the 418 * panels to reduce power consumption, and perhaps match the 419 * user's requested refresh rate. 420 */ 421 422 return true; 423 } 424 425 static void psb_intel_lvds_prepare(struct drm_encoder *encoder) 426 { 427 struct drm_device *dev = encoder->dev; 428 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 429 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 430 431 if (!gma_power_begin(dev, true)) 432 return; 433 434 mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); 435 mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & 436 BACKLIGHT_DUTY_CYCLE_MASK); 437 438 psb_intel_lvds_set_power(dev, false); 439 440 gma_power_end(dev); 441 } 442 443 static void psb_intel_lvds_commit(struct drm_encoder *encoder) 444 { 445 struct drm_device *dev = encoder->dev; 446 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 447 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 448 449 if (mode_dev->backlight_duty_cycle == 0) 450 mode_dev->backlight_duty_cycle = 451 psb_intel_lvds_get_max_backlight(dev); 452 453 psb_intel_lvds_set_power(dev, true); 454 } 455 456 static void psb_intel_lvds_mode_set(struct drm_encoder *encoder, 457 struct drm_display_mode *mode, 458 struct drm_display_mode *adjusted_mode) 459 { 460 struct drm_device *dev = encoder->dev; 461 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 462 u32 pfit_control; 463 464 /* 465 * The LVDS pin pair will already have been turned on in the 466 * psb_intel_crtc_mode_set since it has a large impact on the DPLL 467 * settings. 468 */ 469 470 /* 471 * Enable automatic panel scaling so that non-native modes fill the 472 * screen. Should be enabled before the pipe is enabled, according to 473 * register description and PRM. 474 */ 475 if (mode->hdisplay != adjusted_mode->hdisplay || 476 mode->vdisplay != adjusted_mode->vdisplay) 477 pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | 478 HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | 479 HORIZ_INTERP_BILINEAR); 480 else 481 pfit_control = 0; 482 483 if (dev_priv->lvds_dither) 484 pfit_control |= PANEL_8TO6_DITHER_ENABLE; 485 486 REG_WRITE(PFIT_CONTROL, pfit_control); 487 } 488 489 /* 490 * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. 491 */ 492 static int psb_intel_lvds_get_modes(struct drm_connector *connector) 493 { 494 struct drm_device *dev = connector->dev; 495 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 496 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 497 int ret = 0; 498 499 if (!IS_MRST(dev)) 500 ret = psb_intel_ddc_get_modes(connector, connector->ddc); 501 502 if (ret) 503 return ret; 504 505 if (mode_dev->panel_fixed_mode != NULL) { 506 struct drm_display_mode *mode = 507 drm_mode_duplicate(dev, mode_dev->panel_fixed_mode); 508 if (!mode) 509 return 0; 510 511 drm_mode_probed_add(connector, mode); 512 return 1; 513 } 514 515 return 0; 516 } 517 518 void psb_intel_lvds_destroy(struct drm_connector *connector) 519 { 520 struct gma_connector *gma_connector = to_gma_connector(connector); 521 struct gma_i2c_chan *ddc_bus = to_gma_i2c_chan(connector->ddc); 522 523 gma_i2c_destroy(ddc_bus); 524 drm_connector_cleanup(connector); 525 kfree(gma_connector); 526 } 527 528 int psb_intel_lvds_set_property(struct drm_connector *connector, 529 struct drm_property *property, 530 uint64_t value) 531 { 532 struct drm_encoder *encoder = connector->encoder; 533 534 if (!encoder) 535 return -1; 536 537 if (!strcmp(property->name, "scaling mode")) { 538 struct gma_crtc *crtc = to_gma_crtc(encoder->crtc); 539 uint64_t curval; 540 541 if (!crtc) 542 goto set_prop_error; 543 544 switch (value) { 545 case DRM_MODE_SCALE_FULLSCREEN: 546 break; 547 case DRM_MODE_SCALE_NO_SCALE: 548 break; 549 case DRM_MODE_SCALE_ASPECT: 550 break; 551 default: 552 goto set_prop_error; 553 } 554 555 if (drm_object_property_get_value(&connector->base, 556 property, 557 &curval)) 558 goto set_prop_error; 559 560 if (curval == value) 561 goto set_prop_done; 562 563 if (drm_object_property_set_value(&connector->base, 564 property, 565 value)) 566 goto set_prop_error; 567 568 if (crtc->saved_mode.hdisplay != 0 && 569 crtc->saved_mode.vdisplay != 0) { 570 if (!drm_crtc_helper_set_mode(encoder->crtc, 571 &crtc->saved_mode, 572 encoder->crtc->x, 573 encoder->crtc->y, 574 encoder->crtc->primary->fb)) 575 goto set_prop_error; 576 } 577 } else if (!strcmp(property->name, "backlight")) { 578 if (drm_object_property_set_value(&connector->base, 579 property, 580 value)) 581 goto set_prop_error; 582 else 583 gma_backlight_set(encoder->dev, value); 584 } else if (!strcmp(property->name, "DPMS")) { 585 const struct drm_encoder_helper_funcs *hfuncs 586 = encoder->helper_private; 587 hfuncs->dpms(encoder, value); 588 } 589 590 set_prop_done: 591 return 0; 592 set_prop_error: 593 return -1; 594 } 595 596 static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = { 597 .dpms = psb_intel_lvds_encoder_dpms, 598 .mode_fixup = psb_intel_lvds_mode_fixup, 599 .prepare = psb_intel_lvds_prepare, 600 .mode_set = psb_intel_lvds_mode_set, 601 .commit = psb_intel_lvds_commit, 602 }; 603 604 const struct drm_connector_helper_funcs 605 psb_intel_lvds_connector_helper_funcs = { 606 .get_modes = psb_intel_lvds_get_modes, 607 .mode_valid = psb_intel_lvds_mode_valid, 608 .best_encoder = gma_best_encoder, 609 }; 610 611 const struct drm_connector_funcs psb_intel_lvds_connector_funcs = { 612 .dpms = drm_helper_connector_dpms, 613 .fill_modes = drm_helper_probe_single_connector_modes, 614 .set_property = psb_intel_lvds_set_property, 615 .destroy = psb_intel_lvds_destroy, 616 }; 617 618 /** 619 * psb_intel_lvds_init - setup LVDS connectors on this device 620 * @dev: drm device 621 * @mode_dev: mode device 622 * 623 * Create the connector, register the LVDS DDC bus, and try to figure out what 624 * modes we can display on the LVDS panel (if present). 625 */ 626 void psb_intel_lvds_init(struct drm_device *dev, 627 struct psb_intel_mode_device *mode_dev) 628 { 629 struct gma_encoder *gma_encoder; 630 struct gma_connector *gma_connector; 631 struct psb_intel_lvds_priv *lvds_priv; 632 struct drm_connector *connector; 633 struct drm_encoder *encoder; 634 struct drm_display_mode *scan; /* *modes, *bios_mode; */ 635 struct drm_crtc *crtc; 636 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 637 struct gma_i2c_chan *ddc_bus; 638 u32 lvds; 639 int pipe; 640 int ret; 641 642 gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); 643 if (!gma_encoder) { 644 dev_err(dev->dev, "gma_encoder allocation error\n"); 645 return; 646 } 647 encoder = &gma_encoder->base; 648 649 gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); 650 if (!gma_connector) { 651 dev_err(dev->dev, "gma_connector allocation error\n"); 652 goto err_free_encoder; 653 } 654 655 lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL); 656 if (!lvds_priv) { 657 dev_err(dev->dev, "LVDS private allocation error\n"); 658 goto err_free_connector; 659 } 660 661 gma_encoder->dev_priv = lvds_priv; 662 663 connector = &gma_connector->base; 664 gma_connector->save = psb_intel_lvds_save; 665 gma_connector->restore = psb_intel_lvds_restore; 666 667 /* Set up the DDC bus. */ 668 ddc_bus = gma_i2c_create(dev, GPIOC, "LVDSDDC_C"); 669 if (!ddc_bus) { 670 dev_printk(KERN_ERR, dev->dev, 671 "DDC bus registration " "failed.\n"); 672 goto err_free_lvds_priv; 673 } 674 675 ret = drm_connector_init_with_ddc(dev, connector, 676 &psb_intel_lvds_connector_funcs, 677 DRM_MODE_CONNECTOR_LVDS, 678 &ddc_bus->base); 679 if (ret) 680 goto err_ddc_destroy; 681 682 ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS); 683 if (ret) 684 goto err_connector_cleanup; 685 686 gma_connector_attach_encoder(gma_connector, gma_encoder); 687 gma_encoder->type = INTEL_OUTPUT_LVDS; 688 689 drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs); 690 drm_connector_helper_add(connector, 691 &psb_intel_lvds_connector_helper_funcs); 692 connector->display_info.subpixel_order = SubPixelHorizontalRGB; 693 connector->interlace_allowed = false; 694 connector->doublescan_allowed = false; 695 696 /*Attach connector properties*/ 697 drm_object_attach_property(&connector->base, 698 dev->mode_config.scaling_mode_property, 699 DRM_MODE_SCALE_FULLSCREEN); 700 drm_object_attach_property(&connector->base, 701 dev_priv->backlight_property, 702 BRIGHTNESS_MAX_LEVEL); 703 704 /* 705 * Set up I2C bus 706 * FIXME: distroy i2c_bus when exit 707 */ 708 lvds_priv->i2c_bus = gma_i2c_create(dev, GPIOB, "LVDSBLC_B"); 709 if (!lvds_priv->i2c_bus) { 710 dev_printk(KERN_ERR, 711 dev->dev, "I2C bus registration failed.\n"); 712 goto err_encoder_cleanup; 713 } 714 lvds_priv->i2c_bus->target_addr = 0x2C; 715 dev_priv->lvds_i2c_bus = lvds_priv->i2c_bus; 716 717 /* 718 * LVDS discovery: 719 * 1) check for EDID on DDC 720 * 2) check for VBT data 721 * 3) check to see if LVDS is already on 722 * if none of the above, no panel 723 * 4) make sure lid is open 724 * if closed, act like it's not there for now 725 */ 726 727 /* 728 * Attempt to get the fixed panel mode from DDC. Assume that the 729 * preferred mode is the right one. 730 */ 731 mutex_lock(&dev->mode_config.mutex); 732 psb_intel_ddc_get_modes(connector, &ddc_bus->base); 733 734 list_for_each_entry(scan, &connector->probed_modes, head) { 735 if (scan->type & DRM_MODE_TYPE_PREFERRED) { 736 mode_dev->panel_fixed_mode = 737 drm_mode_duplicate(dev, scan); 738 DRM_DEBUG_KMS("Using mode from DDC\n"); 739 goto out; /* FIXME: check for quirks */ 740 } 741 } 742 743 /* Failed to get EDID, what about VBT? do we need this? */ 744 if (dev_priv->lfp_lvds_vbt_mode) { 745 mode_dev->panel_fixed_mode = 746 drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); 747 748 if (mode_dev->panel_fixed_mode) { 749 mode_dev->panel_fixed_mode->type |= 750 DRM_MODE_TYPE_PREFERRED; 751 DRM_DEBUG_KMS("Using mode from VBT\n"); 752 goto out; 753 } 754 } 755 756 /* 757 * If we didn't get EDID, try checking if the panel is already turned 758 * on. If so, assume that whatever is currently programmed is the 759 * correct mode. 760 */ 761 lvds = REG_READ(LVDS); 762 pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; 763 crtc = psb_intel_get_crtc_from_pipe(dev, pipe); 764 765 if (crtc && (lvds & LVDS_PORT_EN)) { 766 mode_dev->panel_fixed_mode = 767 psb_intel_crtc_mode_get(dev, crtc); 768 if (mode_dev->panel_fixed_mode) { 769 mode_dev->panel_fixed_mode->type |= 770 DRM_MODE_TYPE_PREFERRED; 771 DRM_DEBUG_KMS("Using pre-programmed mode\n"); 772 goto out; /* FIXME: check for quirks */ 773 } 774 } 775 776 /* If we still don't have a mode after all that, give up. */ 777 if (!mode_dev->panel_fixed_mode) { 778 dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); 779 goto err_unlock; 780 } 781 782 /* 783 * Blacklist machines with BIOSes that list an LVDS panel without 784 * actually having one. 785 */ 786 out: 787 mutex_unlock(&dev->mode_config.mutex); 788 return; 789 790 err_unlock: 791 mutex_unlock(&dev->mode_config.mutex); 792 gma_i2c_destroy(lvds_priv->i2c_bus); 793 err_encoder_cleanup: 794 drm_encoder_cleanup(encoder); 795 err_connector_cleanup: 796 drm_connector_cleanup(connector); 797 err_ddc_destroy: 798 gma_i2c_destroy(ddc_bus); 799 err_free_lvds_priv: 800 kfree(lvds_priv); 801 err_free_connector: 802 kfree(gma_connector); 803 err_free_encoder: 804 kfree(gma_encoder); 805 } 806 807