1 /************************************************************************** 2 * Copyright (c) 2009-2011, Intel Corporation. 3 * All Rights Reserved. 4 * 5 * Permission is hereby granted, free of charge, to any person obtaining a 6 * copy of this software and associated documentation files (the "Software"), 7 * to deal in the Software without restriction, including without limitation 8 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 9 * and/or sell copies of the Software, and to permit persons to whom the 10 * Software is furnished to do so, subject to the following conditions: 11 * 12 * The above copyright notice and this permission notice (including the next 13 * paragraph) shall be included in all copies or substantial portions of the 14 * Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 22 * SOFTWARE. 23 * 24 * Authors: 25 * Benjamin Defnet <benjamin.r.defnet@intel.com> 26 * Rajesh Poornachandran <rajesh.poornachandran@intel.com> 27 * Massively reworked 28 * Alan Cox <alan@linux.intel.com> 29 */ 30 31 #include "power.h" 32 #include "psb_drv.h" 33 #include "psb_reg.h" 34 #include "psb_intel_reg.h" 35 #include <linux/mutex.h> 36 #include <linux/pm_runtime.h> 37 38 static struct mutex power_mutex; /* Serialize power ops */ 39 static spinlock_t power_ctrl_lock; /* Serialize power claim */ 40 41 /** 42 * gma_power_init - initialise power manager 43 * @dev: our device 44 * 45 * Set up for power management tracking of our hardware. 46 */ 47 void gma_power_init(struct drm_device *dev) 48 { 49 struct drm_psb_private *dev_priv = dev->dev_private; 50 51 /* FIXME: Move APM/OSPM base into relevant device code */ 52 dev_priv->apm_base = dev_priv->apm_reg & 0xffff; 53 dev_priv->ospm_base &= 0xffff; 54 55 dev_priv->display_power = true; /* We start active */ 56 dev_priv->display_count = 0; /* Currently no users */ 57 dev_priv->suspended = false; /* And not suspended */ 58 spin_lock_init(&power_ctrl_lock); 59 mutex_init(&power_mutex); 60 61 dev_priv->ops->init_pm(dev); 62 } 63 64 /** 65 * gma_power_uninit - end power manager 66 * @dev: device to end for 67 * 68 * Undo the effects of gma_power_init 69 */ 70 void gma_power_uninit(struct drm_device *dev) 71 { 72 pm_runtime_disable(&dev->pdev->dev); 73 pm_runtime_set_suspended(&dev->pdev->dev); 74 } 75 76 /** 77 * gma_suspend_display - suspend the display logic 78 * @dev: our DRM device 79 * 80 * Suspend the display logic of the graphics interface 81 */ 82 static void gma_suspend_display(struct drm_device *dev) 83 { 84 struct drm_psb_private *dev_priv = dev->dev_private; 85 86 if (dev_priv->suspended) 87 return; 88 dev_priv->ops->save_regs(dev); 89 dev_priv->ops->power_down(dev); 90 dev_priv->display_power = false; 91 } 92 93 /** 94 * gma_resume_display - resume display side logic 95 * 96 * Resume the display hardware restoring state and enabling 97 * as necessary. 98 */ 99 static void gma_resume_display(struct pci_dev *pdev) 100 { 101 struct drm_device *dev = pci_get_drvdata(pdev); 102 struct drm_psb_private *dev_priv = dev->dev_private; 103 104 if (dev_priv->suspended == false) 105 return; 106 107 /* turn on the display power island */ 108 dev_priv->ops->power_up(dev); 109 dev_priv->suspended = false; 110 dev_priv->display_power = true; 111 112 PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL); 113 pci_write_config_word(pdev, PSB_GMCH_CTRL, 114 dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED); 115 dev_priv->ops->restore_regs(dev); 116 } 117 118 /** 119 * gma_suspend_pci - suspend PCI side 120 * @pdev: PCI device 121 * 122 * Perform the suspend processing on our PCI device state 123 */ 124 static void gma_suspend_pci(struct pci_dev *pdev) 125 { 126 struct drm_device *dev = pci_get_drvdata(pdev); 127 struct drm_psb_private *dev_priv = dev->dev_private; 128 int bsm, vbt; 129 130 if (dev_priv->suspended) 131 return; 132 133 pci_save_state(pdev); 134 pci_read_config_dword(pdev, 0x5C, &bsm); 135 dev_priv->saveBSM = bsm; 136 pci_read_config_dword(pdev, 0xFC, &vbt); 137 dev_priv->saveVBT = vbt; 138 pci_read_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, &dev_priv->msi_addr); 139 pci_read_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, &dev_priv->msi_data); 140 141 pci_disable_device(pdev); 142 pci_set_power_state(pdev, PCI_D3hot); 143 144 dev_priv->suspended = true; 145 } 146 147 /** 148 * gma_resume_pci - resume helper 149 * @dev: our PCI device 150 * 151 * Perform the resume processing on our PCI device state - rewrite 152 * register state and re-enable the PCI device 153 */ 154 static bool gma_resume_pci(struct pci_dev *pdev) 155 { 156 struct drm_device *dev = pci_get_drvdata(pdev); 157 struct drm_psb_private *dev_priv = dev->dev_private; 158 int ret; 159 160 if (!dev_priv->suspended) 161 return true; 162 163 pci_set_power_state(pdev, PCI_D0); 164 pci_restore_state(pdev); 165 pci_write_config_dword(pdev, 0x5c, dev_priv->saveBSM); 166 pci_write_config_dword(pdev, 0xFC, dev_priv->saveVBT); 167 /* restoring MSI address and data in PCIx space */ 168 pci_write_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, dev_priv->msi_addr); 169 pci_write_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, dev_priv->msi_data); 170 ret = pci_enable_device(pdev); 171 172 if (ret != 0) 173 dev_err(&pdev->dev, "pci_enable failed: %d\n", ret); 174 else 175 dev_priv->suspended = false; 176 return !dev_priv->suspended; 177 } 178 179 /** 180 * gma_power_suspend - bus callback for suspend 181 * @pdev: our PCI device 182 * @state: suspend type 183 * 184 * Called back by the PCI layer during a suspend of the system. We 185 * perform the necessary shut down steps and save enough state that 186 * we can undo this when resume is called. 187 */ 188 int gma_power_suspend(struct device *_dev) 189 { 190 struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev); 191 struct drm_device *dev = pci_get_drvdata(pdev); 192 struct drm_psb_private *dev_priv = dev->dev_private; 193 194 mutex_lock(&power_mutex); 195 if (!dev_priv->suspended) { 196 if (dev_priv->display_count) { 197 mutex_unlock(&power_mutex); 198 return -EBUSY; 199 } 200 psb_irq_uninstall(dev); 201 gma_suspend_display(dev); 202 gma_suspend_pci(pdev); 203 } 204 mutex_unlock(&power_mutex); 205 return 0; 206 } 207 208 /** 209 * gma_power_resume - resume power 210 * @pdev: PCI device 211 * 212 * Resume the PCI side of the graphics and then the displays 213 */ 214 int gma_power_resume(struct device *_dev) 215 { 216 struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev); 217 struct drm_device *dev = pci_get_drvdata(pdev); 218 219 mutex_lock(&power_mutex); 220 gma_resume_pci(pdev); 221 gma_resume_display(pdev); 222 psb_irq_preinstall(dev); 223 psb_irq_postinstall(dev); 224 mutex_unlock(&power_mutex); 225 return 0; 226 } 227 228 /** 229 * gma_power_is_on - returne true if power is on 230 * @dev: our DRM device 231 * 232 * Returns true if the display island power is on at this moment 233 */ 234 bool gma_power_is_on(struct drm_device *dev) 235 { 236 struct drm_psb_private *dev_priv = dev->dev_private; 237 return dev_priv->display_power; 238 } 239 240 /** 241 * gma_power_begin - begin requiring power 242 * @dev: our DRM device 243 * @force_on: true to force power on 244 * 245 * Begin an action that requires the display power island is enabled. 246 * We refcount the islands. 247 */ 248 bool gma_power_begin(struct drm_device *dev, bool force_on) 249 { 250 struct drm_psb_private *dev_priv = dev->dev_private; 251 int ret; 252 unsigned long flags; 253 254 spin_lock_irqsave(&power_ctrl_lock, flags); 255 /* Power already on ? */ 256 if (dev_priv->display_power) { 257 dev_priv->display_count++; 258 pm_runtime_get(&dev->pdev->dev); 259 spin_unlock_irqrestore(&power_ctrl_lock, flags); 260 return true; 261 } 262 if (force_on == false) 263 goto out_false; 264 265 /* Ok power up needed */ 266 ret = gma_resume_pci(dev->pdev); 267 if (ret == 0) { 268 psb_irq_preinstall(dev); 269 psb_irq_postinstall(dev); 270 pm_runtime_get(&dev->pdev->dev); 271 dev_priv->display_count++; 272 spin_unlock_irqrestore(&power_ctrl_lock, flags); 273 return true; 274 } 275 out_false: 276 spin_unlock_irqrestore(&power_ctrl_lock, flags); 277 return false; 278 } 279 280 /** 281 * gma_power_end - end use of power 282 * @dev: Our DRM device 283 * 284 * Indicate that one of our gma_power_begin() requested periods when 285 * the diplay island power is needed has completed. 286 */ 287 void gma_power_end(struct drm_device *dev) 288 { 289 struct drm_psb_private *dev_priv = dev->dev_private; 290 unsigned long flags; 291 spin_lock_irqsave(&power_ctrl_lock, flags); 292 dev_priv->display_count--; 293 WARN_ON(dev_priv->display_count < 0); 294 spin_unlock_irqrestore(&power_ctrl_lock, flags); 295 pm_runtime_put(&dev->pdev->dev); 296 } 297 298 int psb_runtime_suspend(struct device *dev) 299 { 300 return gma_power_suspend(dev); 301 } 302 303 int psb_runtime_resume(struct device *dev) 304 { 305 return gma_power_resume(dev);; 306 } 307 308 int psb_runtime_idle(struct device *dev) 309 { 310 struct drm_device *drmdev = pci_get_drvdata(to_pci_dev(dev)); 311 struct drm_psb_private *dev_priv = drmdev->dev_private; 312 if (dev_priv->display_count) 313 return 0; 314 else 315 return 1; 316 } 317