1 /* 2 * Copyright © 2006-2011 Intel Corporation 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms and conditions of the GNU General Public License, 6 * version 2, as published by the Free Software Foundation. 7 * 8 * This program is distributed in the hope it will be useful, but WITHOUT 9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 11 * more details. 12 * 13 * You should have received a copy of the GNU General Public License along with 14 * this program; if not, write to the Free Software Foundation, Inc., 15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 16 * 17 * Authors: 18 * Eric Anholt <eric@anholt.net> 19 * Patrik Jakobsson <patrik.r.jakobsson@gmail.com> 20 */ 21 22 #include <drm/drmP.h> 23 #include "gma_display.h" 24 #include "psb_intel_drv.h" 25 #include "psb_intel_reg.h" 26 #include "psb_drv.h" 27 #include "framebuffer.h" 28 29 /** 30 * Returns whether any output on the specified pipe is of the specified type 31 */ 32 bool gma_pipe_has_type(struct drm_crtc *crtc, int type) 33 { 34 struct drm_device *dev = crtc->dev; 35 struct drm_mode_config *mode_config = &dev->mode_config; 36 struct drm_connector *l_entry; 37 38 list_for_each_entry(l_entry, &mode_config->connector_list, head) { 39 if (l_entry->encoder && l_entry->encoder->crtc == crtc) { 40 struct gma_encoder *gma_encoder = 41 gma_attached_encoder(l_entry); 42 if (gma_encoder->type == type) 43 return true; 44 } 45 } 46 47 return false; 48 } 49 50 void gma_wait_for_vblank(struct drm_device *dev) 51 { 52 /* Wait for 20ms, i.e. one cycle at 50hz. */ 53 mdelay(20); 54 } 55 56 int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y, 57 struct drm_framebuffer *old_fb) 58 { 59 struct drm_device *dev = crtc->dev; 60 struct drm_psb_private *dev_priv = dev->dev_private; 61 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 62 struct psb_framebuffer *psbfb = to_psb_fb(crtc->primary->fb); 63 int pipe = gma_crtc->pipe; 64 const struct psb_offset *map = &dev_priv->regmap[pipe]; 65 unsigned long start, offset; 66 u32 dspcntr; 67 int ret = 0; 68 69 if (!gma_power_begin(dev, true)) 70 return 0; 71 72 /* no fb bound */ 73 if (!crtc->primary->fb) { 74 dev_err(dev->dev, "No FB bound\n"); 75 goto gma_pipe_cleaner; 76 } 77 78 /* We are displaying this buffer, make sure it is actually loaded 79 into the GTT */ 80 ret = psb_gtt_pin(psbfb->gtt); 81 if (ret < 0) 82 goto gma_pipe_set_base_exit; 83 start = psbfb->gtt->offset; 84 offset = y * crtc->primary->fb->pitches[0] + x * (crtc->primary->fb->bits_per_pixel / 8); 85 86 REG_WRITE(map->stride, crtc->primary->fb->pitches[0]); 87 88 dspcntr = REG_READ(map->cntr); 89 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; 90 91 switch (crtc->primary->fb->bits_per_pixel) { 92 case 8: 93 dspcntr |= DISPPLANE_8BPP; 94 break; 95 case 16: 96 if (crtc->primary->fb->depth == 15) 97 dspcntr |= DISPPLANE_15_16BPP; 98 else 99 dspcntr |= DISPPLANE_16BPP; 100 break; 101 case 24: 102 case 32: 103 dspcntr |= DISPPLANE_32BPP_NO_ALPHA; 104 break; 105 default: 106 dev_err(dev->dev, "Unknown color depth\n"); 107 ret = -EINVAL; 108 goto gma_pipe_set_base_exit; 109 } 110 REG_WRITE(map->cntr, dspcntr); 111 112 dev_dbg(dev->dev, 113 "Writing base %08lX %08lX %d %d\n", start, offset, x, y); 114 115 /* FIXME: Investigate whether this really is the base for psb and why 116 the linear offset is named base for the other chips. map->surf 117 should be the base and map->linoff the offset for all chips */ 118 if (IS_PSB(dev)) { 119 REG_WRITE(map->base, offset + start); 120 REG_READ(map->base); 121 } else { 122 REG_WRITE(map->base, offset); 123 REG_READ(map->base); 124 REG_WRITE(map->surf, start); 125 REG_READ(map->surf); 126 } 127 128 gma_pipe_cleaner: 129 /* If there was a previous display we can now unpin it */ 130 if (old_fb) 131 psb_gtt_unpin(to_psb_fb(old_fb)->gtt); 132 133 gma_pipe_set_base_exit: 134 gma_power_end(dev); 135 return ret; 136 } 137 138 /* Loads the palette/gamma unit for the CRTC with the prepared values */ 139 void gma_crtc_load_lut(struct drm_crtc *crtc) 140 { 141 struct drm_device *dev = crtc->dev; 142 struct drm_psb_private *dev_priv = dev->dev_private; 143 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 144 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 145 int palreg = map->palette; 146 int i; 147 148 /* The clocks have to be on to load the palette. */ 149 if (!crtc->enabled) 150 return; 151 152 if (gma_power_begin(dev, false)) { 153 for (i = 0; i < 256; i++) { 154 REG_WRITE(palreg + 4 * i, 155 ((gma_crtc->lut_r[i] + 156 gma_crtc->lut_adj[i]) << 16) | 157 ((gma_crtc->lut_g[i] + 158 gma_crtc->lut_adj[i]) << 8) | 159 (gma_crtc->lut_b[i] + 160 gma_crtc->lut_adj[i])); 161 } 162 gma_power_end(dev); 163 } else { 164 for (i = 0; i < 256; i++) { 165 /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */ 166 dev_priv->regs.pipe[0].palette[i] = 167 ((gma_crtc->lut_r[i] + 168 gma_crtc->lut_adj[i]) << 16) | 169 ((gma_crtc->lut_g[i] + 170 gma_crtc->lut_adj[i]) << 8) | 171 (gma_crtc->lut_b[i] + 172 gma_crtc->lut_adj[i]); 173 } 174 175 } 176 } 177 178 void gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, 179 u32 start, u32 size) 180 { 181 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 182 int i; 183 int end = (start + size > 256) ? 256 : start + size; 184 185 for (i = start; i < end; i++) { 186 gma_crtc->lut_r[i] = red[i] >> 8; 187 gma_crtc->lut_g[i] = green[i] >> 8; 188 gma_crtc->lut_b[i] = blue[i] >> 8; 189 } 190 191 gma_crtc_load_lut(crtc); 192 } 193 194 /** 195 * Sets the power management mode of the pipe and plane. 196 * 197 * This code should probably grow support for turning the cursor off and back 198 * on appropriately at the same time as we're turning the pipe off/on. 199 */ 200 void gma_crtc_dpms(struct drm_crtc *crtc, int mode) 201 { 202 struct drm_device *dev = crtc->dev; 203 struct drm_psb_private *dev_priv = dev->dev_private; 204 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 205 int pipe = gma_crtc->pipe; 206 const struct psb_offset *map = &dev_priv->regmap[pipe]; 207 u32 temp; 208 209 /* XXX: When our outputs are all unaware of DPMS modes other than off 210 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. 211 */ 212 213 if (IS_CDV(dev)) 214 dev_priv->ops->disable_sr(dev); 215 216 switch (mode) { 217 case DRM_MODE_DPMS_ON: 218 case DRM_MODE_DPMS_STANDBY: 219 case DRM_MODE_DPMS_SUSPEND: 220 if (gma_crtc->active) 221 break; 222 223 gma_crtc->active = true; 224 225 /* Enable the DPLL */ 226 temp = REG_READ(map->dpll); 227 if ((temp & DPLL_VCO_ENABLE) == 0) { 228 REG_WRITE(map->dpll, temp); 229 REG_READ(map->dpll); 230 /* Wait for the clocks to stabilize. */ 231 udelay(150); 232 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); 233 REG_READ(map->dpll); 234 /* Wait for the clocks to stabilize. */ 235 udelay(150); 236 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); 237 REG_READ(map->dpll); 238 /* Wait for the clocks to stabilize. */ 239 udelay(150); 240 } 241 242 /* Enable the plane */ 243 temp = REG_READ(map->cntr); 244 if ((temp & DISPLAY_PLANE_ENABLE) == 0) { 245 REG_WRITE(map->cntr, 246 temp | DISPLAY_PLANE_ENABLE); 247 /* Flush the plane changes */ 248 REG_WRITE(map->base, REG_READ(map->base)); 249 } 250 251 udelay(150); 252 253 /* Enable the pipe */ 254 temp = REG_READ(map->conf); 255 if ((temp & PIPEACONF_ENABLE) == 0) 256 REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); 257 258 temp = REG_READ(map->status); 259 temp &= ~(0xFFFF); 260 temp |= PIPE_FIFO_UNDERRUN; 261 REG_WRITE(map->status, temp); 262 REG_READ(map->status); 263 264 gma_crtc_load_lut(crtc); 265 266 /* Give the overlay scaler a chance to enable 267 * if it's on this pipe */ 268 /* psb_intel_crtc_dpms_video(crtc, true); TODO */ 269 break; 270 case DRM_MODE_DPMS_OFF: 271 if (!gma_crtc->active) 272 break; 273 274 gma_crtc->active = false; 275 276 /* Give the overlay scaler a chance to disable 277 * if it's on this pipe */ 278 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ 279 280 /* Disable the VGA plane that we never use */ 281 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); 282 283 /* Turn off vblank interrupts */ 284 drm_vblank_off(dev, pipe); 285 286 /* Wait for vblank for the disable to take effect */ 287 gma_wait_for_vblank(dev); 288 289 /* Disable plane */ 290 temp = REG_READ(map->cntr); 291 if ((temp & DISPLAY_PLANE_ENABLE) != 0) { 292 REG_WRITE(map->cntr, 293 temp & ~DISPLAY_PLANE_ENABLE); 294 /* Flush the plane changes */ 295 REG_WRITE(map->base, REG_READ(map->base)); 296 REG_READ(map->base); 297 } 298 299 /* Disable pipe */ 300 temp = REG_READ(map->conf); 301 if ((temp & PIPEACONF_ENABLE) != 0) { 302 REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); 303 REG_READ(map->conf); 304 } 305 306 /* Wait for vblank for the disable to take effect. */ 307 gma_wait_for_vblank(dev); 308 309 udelay(150); 310 311 /* Disable DPLL */ 312 temp = REG_READ(map->dpll); 313 if ((temp & DPLL_VCO_ENABLE) != 0) { 314 REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); 315 REG_READ(map->dpll); 316 } 317 318 /* Wait for the clocks to turn off. */ 319 udelay(150); 320 break; 321 } 322 323 if (IS_CDV(dev)) 324 dev_priv->ops->update_wm(dev, crtc); 325 326 /* Set FIFO watermarks */ 327 REG_WRITE(DSPARB, 0x3F3E); 328 } 329 330 int gma_crtc_cursor_set(struct drm_crtc *crtc, 331 struct drm_file *file_priv, 332 uint32_t handle, 333 uint32_t width, uint32_t height) 334 { 335 struct drm_device *dev = crtc->dev; 336 struct drm_psb_private *dev_priv = dev->dev_private; 337 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 338 int pipe = gma_crtc->pipe; 339 uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; 340 uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; 341 uint32_t temp; 342 size_t addr = 0; 343 struct gtt_range *gt; 344 struct gtt_range *cursor_gt = gma_crtc->cursor_gt; 345 struct drm_gem_object *obj; 346 void *tmp_dst, *tmp_src; 347 int ret = 0, i, cursor_pages; 348 349 /* If we didn't get a handle then turn the cursor off */ 350 if (!handle) { 351 temp = CURSOR_MODE_DISABLE; 352 mutex_lock(&dev->struct_mutex); 353 354 if (gma_power_begin(dev, false)) { 355 REG_WRITE(control, temp); 356 REG_WRITE(base, 0); 357 gma_power_end(dev); 358 } 359 360 /* Unpin the old GEM object */ 361 if (gma_crtc->cursor_obj) { 362 gt = container_of(gma_crtc->cursor_obj, 363 struct gtt_range, gem); 364 psb_gtt_unpin(gt); 365 drm_gem_object_unreference(gma_crtc->cursor_obj); 366 gma_crtc->cursor_obj = NULL; 367 } 368 369 mutex_unlock(&dev->struct_mutex); 370 return 0; 371 } 372 373 /* Currently we only support 64x64 cursors */ 374 if (width != 64 || height != 64) { 375 dev_dbg(dev->dev, "We currently only support 64x64 cursors\n"); 376 return -EINVAL; 377 } 378 379 mutex_lock(&dev->struct_mutex); 380 obj = drm_gem_object_lookup(dev, file_priv, handle); 381 if (!obj) { 382 ret = -ENOENT; 383 goto unlock; 384 } 385 386 if (obj->size < width * height * 4) { 387 dev_dbg(dev->dev, "Buffer is too small\n"); 388 ret = -ENOMEM; 389 goto unref_cursor; 390 } 391 392 gt = container_of(obj, struct gtt_range, gem); 393 394 /* Pin the memory into the GTT */ 395 ret = psb_gtt_pin(gt); 396 if (ret) { 397 dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); 398 goto unref_cursor; 399 } 400 401 if (dev_priv->ops->cursor_needs_phys) { 402 if (cursor_gt == NULL) { 403 dev_err(dev->dev, "No hardware cursor mem available"); 404 ret = -ENOMEM; 405 goto unref_cursor; 406 } 407 408 /* Prevent overflow */ 409 if (gt->npage > 4) 410 cursor_pages = 4; 411 else 412 cursor_pages = gt->npage; 413 414 /* Copy the cursor to cursor mem */ 415 tmp_dst = dev_priv->vram_addr + cursor_gt->offset; 416 for (i = 0; i < cursor_pages; i++) { 417 tmp_src = kmap(gt->pages[i]); 418 memcpy(tmp_dst, tmp_src, PAGE_SIZE); 419 kunmap(gt->pages[i]); 420 tmp_dst += PAGE_SIZE; 421 } 422 423 addr = gma_crtc->cursor_addr; 424 } else { 425 addr = gt->offset; 426 gma_crtc->cursor_addr = addr; 427 } 428 429 temp = 0; 430 /* set the pipe for the cursor */ 431 temp |= (pipe << 28); 432 temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; 433 434 if (gma_power_begin(dev, false)) { 435 REG_WRITE(control, temp); 436 REG_WRITE(base, addr); 437 gma_power_end(dev); 438 } 439 440 /* unpin the old bo */ 441 if (gma_crtc->cursor_obj) { 442 gt = container_of(gma_crtc->cursor_obj, struct gtt_range, gem); 443 psb_gtt_unpin(gt); 444 drm_gem_object_unreference(gma_crtc->cursor_obj); 445 } 446 447 gma_crtc->cursor_obj = obj; 448 unlock: 449 mutex_unlock(&dev->struct_mutex); 450 return ret; 451 452 unref_cursor: 453 drm_gem_object_unreference(obj); 454 mutex_unlock(&dev->struct_mutex); 455 return ret; 456 } 457 458 int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) 459 { 460 struct drm_device *dev = crtc->dev; 461 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 462 int pipe = gma_crtc->pipe; 463 uint32_t temp = 0; 464 uint32_t addr; 465 466 if (x < 0) { 467 temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); 468 x = -x; 469 } 470 if (y < 0) { 471 temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); 472 y = -y; 473 } 474 475 temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); 476 temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); 477 478 addr = gma_crtc->cursor_addr; 479 480 if (gma_power_begin(dev, false)) { 481 REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); 482 REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr); 483 gma_power_end(dev); 484 } 485 return 0; 486 } 487 488 bool gma_encoder_mode_fixup(struct drm_encoder *encoder, 489 const struct drm_display_mode *mode, 490 struct drm_display_mode *adjusted_mode) 491 { 492 return true; 493 } 494 495 bool gma_crtc_mode_fixup(struct drm_crtc *crtc, 496 const struct drm_display_mode *mode, 497 struct drm_display_mode *adjusted_mode) 498 { 499 return true; 500 } 501 502 void gma_crtc_prepare(struct drm_crtc *crtc) 503 { 504 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 505 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); 506 } 507 508 void gma_crtc_commit(struct drm_crtc *crtc) 509 { 510 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 511 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); 512 } 513 514 void gma_crtc_disable(struct drm_crtc *crtc) 515 { 516 struct gtt_range *gt; 517 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 518 519 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); 520 521 if (crtc->primary->fb) { 522 gt = to_psb_fb(crtc->primary->fb)->gtt; 523 psb_gtt_unpin(gt); 524 } 525 } 526 527 void gma_crtc_destroy(struct drm_crtc *crtc) 528 { 529 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 530 531 kfree(gma_crtc->crtc_state); 532 drm_crtc_cleanup(crtc); 533 kfree(gma_crtc); 534 } 535 536 int gma_crtc_set_config(struct drm_mode_set *set) 537 { 538 struct drm_device *dev = set->crtc->dev; 539 struct drm_psb_private *dev_priv = dev->dev_private; 540 int ret; 541 542 if (!dev_priv->rpm_enabled) 543 return drm_crtc_helper_set_config(set); 544 545 pm_runtime_forbid(&dev->pdev->dev); 546 ret = drm_crtc_helper_set_config(set); 547 pm_runtime_allow(&dev->pdev->dev); 548 549 return ret; 550 } 551 552 /** 553 * Save HW states of given crtc 554 */ 555 void gma_crtc_save(struct drm_crtc *crtc) 556 { 557 struct drm_device *dev = crtc->dev; 558 struct drm_psb_private *dev_priv = dev->dev_private; 559 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 560 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; 561 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 562 uint32_t palette_reg; 563 int i; 564 565 if (!crtc_state) { 566 dev_err(dev->dev, "No CRTC state found\n"); 567 return; 568 } 569 570 crtc_state->saveDSPCNTR = REG_READ(map->cntr); 571 crtc_state->savePIPECONF = REG_READ(map->conf); 572 crtc_state->savePIPESRC = REG_READ(map->src); 573 crtc_state->saveFP0 = REG_READ(map->fp0); 574 crtc_state->saveFP1 = REG_READ(map->fp1); 575 crtc_state->saveDPLL = REG_READ(map->dpll); 576 crtc_state->saveHTOTAL = REG_READ(map->htotal); 577 crtc_state->saveHBLANK = REG_READ(map->hblank); 578 crtc_state->saveHSYNC = REG_READ(map->hsync); 579 crtc_state->saveVTOTAL = REG_READ(map->vtotal); 580 crtc_state->saveVBLANK = REG_READ(map->vblank); 581 crtc_state->saveVSYNC = REG_READ(map->vsync); 582 crtc_state->saveDSPSTRIDE = REG_READ(map->stride); 583 584 /* NOTE: DSPSIZE DSPPOS only for psb */ 585 crtc_state->saveDSPSIZE = REG_READ(map->size); 586 crtc_state->saveDSPPOS = REG_READ(map->pos); 587 588 crtc_state->saveDSPBASE = REG_READ(map->base); 589 590 palette_reg = map->palette; 591 for (i = 0; i < 256; ++i) 592 crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2)); 593 } 594 595 /** 596 * Restore HW states of given crtc 597 */ 598 void gma_crtc_restore(struct drm_crtc *crtc) 599 { 600 struct drm_device *dev = crtc->dev; 601 struct drm_psb_private *dev_priv = dev->dev_private; 602 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 603 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; 604 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 605 uint32_t palette_reg; 606 int i; 607 608 if (!crtc_state) { 609 dev_err(dev->dev, "No crtc state\n"); 610 return; 611 } 612 613 if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { 614 REG_WRITE(map->dpll, 615 crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); 616 REG_READ(map->dpll); 617 udelay(150); 618 } 619 620 REG_WRITE(map->fp0, crtc_state->saveFP0); 621 REG_READ(map->fp0); 622 623 REG_WRITE(map->fp1, crtc_state->saveFP1); 624 REG_READ(map->fp1); 625 626 REG_WRITE(map->dpll, crtc_state->saveDPLL); 627 REG_READ(map->dpll); 628 udelay(150); 629 630 REG_WRITE(map->htotal, crtc_state->saveHTOTAL); 631 REG_WRITE(map->hblank, crtc_state->saveHBLANK); 632 REG_WRITE(map->hsync, crtc_state->saveHSYNC); 633 REG_WRITE(map->vtotal, crtc_state->saveVTOTAL); 634 REG_WRITE(map->vblank, crtc_state->saveVBLANK); 635 REG_WRITE(map->vsync, crtc_state->saveVSYNC); 636 REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE); 637 638 REG_WRITE(map->size, crtc_state->saveDSPSIZE); 639 REG_WRITE(map->pos, crtc_state->saveDSPPOS); 640 641 REG_WRITE(map->src, crtc_state->savePIPESRC); 642 REG_WRITE(map->base, crtc_state->saveDSPBASE); 643 REG_WRITE(map->conf, crtc_state->savePIPECONF); 644 645 gma_wait_for_vblank(dev); 646 647 REG_WRITE(map->cntr, crtc_state->saveDSPCNTR); 648 REG_WRITE(map->base, crtc_state->saveDSPBASE); 649 650 gma_wait_for_vblank(dev); 651 652 palette_reg = map->palette; 653 for (i = 0; i < 256; ++i) 654 REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]); 655 } 656 657 void gma_encoder_prepare(struct drm_encoder *encoder) 658 { 659 struct drm_encoder_helper_funcs *encoder_funcs = 660 encoder->helper_private; 661 /* lvds has its own version of prepare see psb_intel_lvds_prepare */ 662 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); 663 } 664 665 void gma_encoder_commit(struct drm_encoder *encoder) 666 { 667 struct drm_encoder_helper_funcs *encoder_funcs = 668 encoder->helper_private; 669 /* lvds has its own version of commit see psb_intel_lvds_commit */ 670 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); 671 } 672 673 void gma_encoder_destroy(struct drm_encoder *encoder) 674 { 675 struct gma_encoder *intel_encoder = to_gma_encoder(encoder); 676 677 drm_encoder_cleanup(encoder); 678 kfree(intel_encoder); 679 } 680 681 /* Currently there is only a 1:1 mapping of encoders and connectors */ 682 struct drm_encoder *gma_best_encoder(struct drm_connector *connector) 683 { 684 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 685 686 return &gma_encoder->base; 687 } 688 689 void gma_connector_attach_encoder(struct gma_connector *connector, 690 struct gma_encoder *encoder) 691 { 692 connector->encoder = encoder; 693 drm_mode_connector_attach_encoder(&connector->base, 694 &encoder->base); 695 } 696 697 #define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; } 698 699 bool gma_pll_is_valid(struct drm_crtc *crtc, 700 const struct gma_limit_t *limit, 701 struct gma_clock_t *clock) 702 { 703 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) 704 GMA_PLL_INVALID("p1 out of range"); 705 if (clock->p < limit->p.min || limit->p.max < clock->p) 706 GMA_PLL_INVALID("p out of range"); 707 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) 708 GMA_PLL_INVALID("m2 out of range"); 709 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) 710 GMA_PLL_INVALID("m1 out of range"); 711 /* On CDV m1 is always 0 */ 712 if (clock->m1 <= clock->m2 && clock->m1 != 0) 713 GMA_PLL_INVALID("m1 <= m2 && m1 != 0"); 714 if (clock->m < limit->m.min || limit->m.max < clock->m) 715 GMA_PLL_INVALID("m out of range"); 716 if (clock->n < limit->n.min || limit->n.max < clock->n) 717 GMA_PLL_INVALID("n out of range"); 718 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) 719 GMA_PLL_INVALID("vco out of range"); 720 /* XXX: We may need to be checking "Dot clock" 721 * depending on the multiplier, connector, etc., 722 * rather than just a single range. 723 */ 724 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) 725 GMA_PLL_INVALID("dot out of range"); 726 727 return true; 728 } 729 730 bool gma_find_best_pll(const struct gma_limit_t *limit, 731 struct drm_crtc *crtc, int target, int refclk, 732 struct gma_clock_t *best_clock) 733 { 734 struct drm_device *dev = crtc->dev; 735 const struct gma_clock_funcs *clock_funcs = 736 to_gma_crtc(crtc)->clock_funcs; 737 struct gma_clock_t clock; 738 int err = target; 739 740 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && 741 (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { 742 /* 743 * For LVDS, if the panel is on, just rely on its current 744 * settings for dual-channel. We haven't figured out how to 745 * reliably set up different single/dual channel state, if we 746 * even can. 747 */ 748 if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == 749 LVDS_CLKB_POWER_UP) 750 clock.p2 = limit->p2.p2_fast; 751 else 752 clock.p2 = limit->p2.p2_slow; 753 } else { 754 if (target < limit->p2.dot_limit) 755 clock.p2 = limit->p2.p2_slow; 756 else 757 clock.p2 = limit->p2.p2_fast; 758 } 759 760 memset(best_clock, 0, sizeof(*best_clock)); 761 762 /* m1 is always 0 on CDV so the outmost loop will run just once */ 763 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { 764 for (clock.m2 = limit->m2.min; 765 (clock.m2 < clock.m1 || clock.m1 == 0) && 766 clock.m2 <= limit->m2.max; clock.m2++) { 767 for (clock.n = limit->n.min; 768 clock.n <= limit->n.max; clock.n++) { 769 for (clock.p1 = limit->p1.min; 770 clock.p1 <= limit->p1.max; 771 clock.p1++) { 772 int this_err; 773 774 clock_funcs->clock(refclk, &clock); 775 776 if (!clock_funcs->pll_is_valid(crtc, 777 limit, &clock)) 778 continue; 779 780 this_err = abs(clock.dot - target); 781 if (this_err < err) { 782 *best_clock = clock; 783 err = this_err; 784 } 785 } 786 } 787 } 788 } 789 790 return err != target; 791 } 792