1 /* 2 * Copyright © 2006-2007 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 * 23 * Authors: 24 * Eric Anholt <eric@anholt.net> 25 */ 26 27 #include <linux/i2c.h> 28 #include <drm/drmP.h> 29 30 #include "intel_bios.h" 31 #include "psb_drv.h" 32 #include "psb_intel_drv.h" 33 #include "psb_intel_reg.h" 34 #include "power.h" 35 #include "cdv_device.h" 36 #include <linux/pm_runtime.h> 37 38 39 static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode) 40 { 41 struct drm_device *dev = encoder->dev; 42 u32 temp, reg; 43 reg = ADPA; 44 45 temp = REG_READ(reg); 46 temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); 47 temp &= ~ADPA_DAC_ENABLE; 48 49 switch (mode) { 50 case DRM_MODE_DPMS_ON: 51 temp |= ADPA_DAC_ENABLE; 52 break; 53 case DRM_MODE_DPMS_STANDBY: 54 temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE; 55 break; 56 case DRM_MODE_DPMS_SUSPEND: 57 temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE; 58 break; 59 case DRM_MODE_DPMS_OFF: 60 temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; 61 break; 62 } 63 64 REG_WRITE(reg, temp); 65 } 66 67 static int cdv_intel_crt_mode_valid(struct drm_connector *connector, 68 struct drm_display_mode *mode) 69 { 70 if (mode->flags & DRM_MODE_FLAG_DBLSCAN) 71 return MODE_NO_DBLESCAN; 72 73 /* The lowest clock for CDV is 20000KHz */ 74 if (mode->clock < 20000) 75 return MODE_CLOCK_LOW; 76 77 /* The max clock for CDV is 355 instead of 400 */ 78 if (mode->clock > 355000) 79 return MODE_CLOCK_HIGH; 80 81 return MODE_OK; 82 } 83 84 static void cdv_intel_crt_mode_set(struct drm_encoder *encoder, 85 struct drm_display_mode *mode, 86 struct drm_display_mode *adjusted_mode) 87 { 88 89 struct drm_device *dev = encoder->dev; 90 struct drm_crtc *crtc = encoder->crtc; 91 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 92 int dpll_md_reg; 93 u32 adpa, dpll_md; 94 u32 adpa_reg; 95 96 if (gma_crtc->pipe == 0) 97 dpll_md_reg = DPLL_A_MD; 98 else 99 dpll_md_reg = DPLL_B_MD; 100 101 adpa_reg = ADPA; 102 103 /* 104 * Disable separate mode multiplier used when cloning SDVO to CRT 105 * XXX this needs to be adjusted when we really are cloning 106 */ 107 { 108 dpll_md = REG_READ(dpll_md_reg); 109 REG_WRITE(dpll_md_reg, 110 dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); 111 } 112 113 adpa = 0; 114 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) 115 adpa |= ADPA_HSYNC_ACTIVE_HIGH; 116 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) 117 adpa |= ADPA_VSYNC_ACTIVE_HIGH; 118 119 if (gma_crtc->pipe == 0) 120 adpa |= ADPA_PIPE_A_SELECT; 121 else 122 adpa |= ADPA_PIPE_B_SELECT; 123 124 REG_WRITE(adpa_reg, adpa); 125 } 126 127 128 /** 129 * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence. 130 * 131 * \return true if CRT is connected. 132 * \return false if CRT is disconnected. 133 */ 134 static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector, 135 bool force) 136 { 137 struct drm_device *dev = connector->dev; 138 u32 hotplug_en; 139 int i, tries = 0, ret = false; 140 u32 orig; 141 142 /* 143 * On a CDV thep, CRT detect sequence need to be done twice 144 * to get a reliable result. 145 */ 146 tries = 2; 147 148 orig = hotplug_en = REG_READ(PORT_HOTPLUG_EN); 149 hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK); 150 hotplug_en |= CRT_HOTPLUG_FORCE_DETECT; 151 152 hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; 153 hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; 154 155 for (i = 0; i < tries ; i++) { 156 unsigned long timeout; 157 /* turn on the FORCE_DETECT */ 158 REG_WRITE(PORT_HOTPLUG_EN, hotplug_en); 159 timeout = jiffies + msecs_to_jiffies(1000); 160 /* wait for FORCE_DETECT to go off */ 161 do { 162 if (!(REG_READ(PORT_HOTPLUG_EN) & 163 CRT_HOTPLUG_FORCE_DETECT)) 164 break; 165 msleep(1); 166 } while (time_after(timeout, jiffies)); 167 } 168 169 if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) != 170 CRT_HOTPLUG_MONITOR_NONE) 171 ret = true; 172 173 /* clear the interrupt we just generated, if any */ 174 REG_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS); 175 176 /* and put the bits back */ 177 REG_WRITE(PORT_HOTPLUG_EN, orig); 178 return ret; 179 } 180 181 static enum drm_connector_status cdv_intel_crt_detect( 182 struct drm_connector *connector, bool force) 183 { 184 if (cdv_intel_crt_detect_hotplug(connector, force)) 185 return connector_status_connected; 186 else 187 return connector_status_disconnected; 188 } 189 190 static void cdv_intel_crt_destroy(struct drm_connector *connector) 191 { 192 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 193 194 psb_intel_i2c_destroy(gma_encoder->ddc_bus); 195 drm_connector_unregister(connector); 196 drm_connector_cleanup(connector); 197 kfree(connector); 198 } 199 200 static int cdv_intel_crt_get_modes(struct drm_connector *connector) 201 { 202 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 203 return psb_intel_ddc_get_modes(connector, 204 &gma_encoder->ddc_bus->adapter); 205 } 206 207 static int cdv_intel_crt_set_property(struct drm_connector *connector, 208 struct drm_property *property, 209 uint64_t value) 210 { 211 return 0; 212 } 213 214 /* 215 * Routines for controlling stuff on the analog port 216 */ 217 218 static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = { 219 .dpms = cdv_intel_crt_dpms, 220 .prepare = gma_encoder_prepare, 221 .commit = gma_encoder_commit, 222 .mode_set = cdv_intel_crt_mode_set, 223 }; 224 225 static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = { 226 .dpms = drm_helper_connector_dpms, 227 .detect = cdv_intel_crt_detect, 228 .fill_modes = drm_helper_probe_single_connector_modes, 229 .destroy = cdv_intel_crt_destroy, 230 .set_property = cdv_intel_crt_set_property, 231 }; 232 233 static const struct drm_connector_helper_funcs 234 cdv_intel_crt_connector_helper_funcs = { 235 .mode_valid = cdv_intel_crt_mode_valid, 236 .get_modes = cdv_intel_crt_get_modes, 237 .best_encoder = gma_best_encoder, 238 }; 239 240 static void cdv_intel_crt_enc_destroy(struct drm_encoder *encoder) 241 { 242 drm_encoder_cleanup(encoder); 243 } 244 245 static const struct drm_encoder_funcs cdv_intel_crt_enc_funcs = { 246 .destroy = cdv_intel_crt_enc_destroy, 247 }; 248 249 void cdv_intel_crt_init(struct drm_device *dev, 250 struct psb_intel_mode_device *mode_dev) 251 { 252 253 struct gma_connector *gma_connector; 254 struct gma_encoder *gma_encoder; 255 struct drm_connector *connector; 256 struct drm_encoder *encoder; 257 258 u32 i2c_reg; 259 260 gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); 261 if (!gma_encoder) 262 return; 263 264 gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); 265 if (!gma_connector) 266 goto failed_connector; 267 268 connector = &gma_connector->base; 269 connector->polled = DRM_CONNECTOR_POLL_HPD; 270 drm_connector_init(dev, connector, 271 &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); 272 273 encoder = &gma_encoder->base; 274 drm_encoder_init(dev, encoder, 275 &cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC, NULL); 276 277 gma_connector_attach_encoder(gma_connector, gma_encoder); 278 279 /* Set up the DDC bus. */ 280 i2c_reg = GPIOA; 281 /* Remove the following code for CDV */ 282 /* 283 if (dev_priv->crt_ddc_bus != 0) 284 i2c_reg = dev_priv->crt_ddc_bus; 285 }*/ 286 gma_encoder->ddc_bus = psb_intel_i2c_create(dev, 287 i2c_reg, "CRTDDC_A"); 288 if (!gma_encoder->ddc_bus) { 289 dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " 290 "failed.\n"); 291 goto failed_ddc; 292 } 293 294 gma_encoder->type = INTEL_OUTPUT_ANALOG; 295 /* 296 psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT); 297 psb_intel_output->crtc_mask = (1 << 0) | (1 << 1); 298 */ 299 connector->interlace_allowed = 0; 300 connector->doublescan_allowed = 0; 301 302 drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs); 303 drm_connector_helper_add(connector, 304 &cdv_intel_crt_connector_helper_funcs); 305 306 drm_connector_register(connector); 307 308 return; 309 failed_ddc: 310 drm_encoder_cleanup(&gma_encoder->base); 311 drm_connector_cleanup(&gma_connector->base); 312 kfree(gma_connector); 313 failed_connector: 314 kfree(gma_encoder); 315 return; 316 } 317