1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* exynos_drm_fimd.c 3 * 4 * Copyright (C) 2011 Samsung Electronics Co.Ltd 5 * Authors: 6 * Joonyoung Shim <jy0922.shim@samsung.com> 7 * Inki Dae <inki.dae@samsung.com> 8 */ 9 10 #include <linux/clk.h> 11 #include <linux/component.h> 12 #include <linux/kernel.h> 13 #include <linux/mfd/syscon.h> 14 #include <linux/of.h> 15 #include <linux/of_device.h> 16 #include <linux/platform_device.h> 17 #include <linux/pm_runtime.h> 18 #include <linux/regmap.h> 19 20 #include <video/of_display_timing.h> 21 #include <video/of_videomode.h> 22 #include <video/samsung_fimd.h> 23 24 #include <drm/drm_fourcc.h> 25 #include <drm/drm_vblank.h> 26 #include <drm/exynos_drm.h> 27 28 #include "exynos_drm_crtc.h" 29 #include "exynos_drm_drv.h" 30 #include "exynos_drm_fb.h" 31 #include "exynos_drm_plane.h" 32 33 /* 34 * FIMD stands for Fully Interactive Mobile Display and 35 * as a display controller, it transfers contents drawn on memory 36 * to a LCD Panel through Display Interfaces such as RGB or 37 * CPU Interface. 38 */ 39 40 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 41 42 /* position control register for hardware window 0, 2 ~ 4.*/ 43 #define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16) 44 #define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16) 45 /* 46 * size control register for hardware windows 0 and alpha control register 47 * for hardware windows 1 ~ 4 48 */ 49 #define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16) 50 /* size control register for hardware windows 1 ~ 2. */ 51 #define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16) 52 53 #define VIDWnALPHA0(win) (VIDW_ALPHA + 0x00 + (win) * 8) 54 #define VIDWnALPHA1(win) (VIDW_ALPHA + 0x04 + (win) * 8) 55 56 #define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8) 57 #define VIDWx_BUF_START_S(win, buf) (VIDW_BUF_START_S(buf) + (win) * 8) 58 #define VIDWx_BUF_END(win, buf) (VIDW_BUF_END(buf) + (win) * 8) 59 #define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4) 60 61 /* color key control register for hardware window 1 ~ 4. */ 62 #define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8)) 63 /* color key value register for hardware window 1 ~ 4. */ 64 #define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8)) 65 66 /* I80 trigger control register */ 67 #define TRIGCON 0x1A4 68 #define TRGMODE_ENABLE (1 << 0) 69 #define SWTRGCMD_ENABLE (1 << 1) 70 /* Exynos3250, 3472, 5260 5410, 5420 and 5422 only supported. */ 71 #define HWTRGEN_ENABLE (1 << 3) 72 #define HWTRGMASK_ENABLE (1 << 4) 73 /* Exynos3250, 3472, 5260, 5420 and 5422 only supported. */ 74 #define HWTRIGEN_PER_ENABLE (1 << 31) 75 76 /* display mode change control register except exynos4 */ 77 #define VIDOUT_CON 0x000 78 #define VIDOUT_CON_F_I80_LDI0 (0x2 << 8) 79 80 /* I80 interface control for main LDI register */ 81 #define I80IFCONFAx(x) (0x1B0 + (x) * 4) 82 #define I80IFCONFBx(x) (0x1B8 + (x) * 4) 83 #define LCD_CS_SETUP(x) ((x) << 16) 84 #define LCD_WR_SETUP(x) ((x) << 12) 85 #define LCD_WR_ACTIVE(x) ((x) << 8) 86 #define LCD_WR_HOLD(x) ((x) << 4) 87 #define I80IFEN_ENABLE (1 << 0) 88 89 /* FIMD has totally five hardware windows. */ 90 #define WINDOWS_NR 5 91 92 /* HW trigger flag on i80 panel. */ 93 #define I80_HW_TRG (1 << 1) 94 95 struct fimd_driver_data { 96 unsigned int timing_base; 97 unsigned int lcdblk_offset; 98 unsigned int lcdblk_vt_shift; 99 unsigned int lcdblk_bypass_shift; 100 unsigned int lcdblk_mic_bypass_shift; 101 unsigned int trg_type; 102 103 unsigned int has_shadowcon:1; 104 unsigned int has_clksel:1; 105 unsigned int has_limited_fmt:1; 106 unsigned int has_vidoutcon:1; 107 unsigned int has_vtsel:1; 108 unsigned int has_mic_bypass:1; 109 unsigned int has_dp_clk:1; 110 unsigned int has_hw_trigger:1; 111 unsigned int has_trigger_per_te:1; 112 }; 113 114 static struct fimd_driver_data s3c64xx_fimd_driver_data = { 115 .timing_base = 0x0, 116 .has_clksel = 1, 117 .has_limited_fmt = 1, 118 }; 119 120 static struct fimd_driver_data s5pv210_fimd_driver_data = { 121 .timing_base = 0x0, 122 .has_shadowcon = 1, 123 .has_clksel = 1, 124 }; 125 126 static struct fimd_driver_data exynos3_fimd_driver_data = { 127 .timing_base = 0x20000, 128 .lcdblk_offset = 0x210, 129 .lcdblk_bypass_shift = 1, 130 .has_shadowcon = 1, 131 .has_vidoutcon = 1, 132 }; 133 134 static struct fimd_driver_data exynos4_fimd_driver_data = { 135 .timing_base = 0x0, 136 .lcdblk_offset = 0x210, 137 .lcdblk_vt_shift = 10, 138 .lcdblk_bypass_shift = 1, 139 .has_shadowcon = 1, 140 .has_vtsel = 1, 141 }; 142 143 static struct fimd_driver_data exynos5_fimd_driver_data = { 144 .timing_base = 0x20000, 145 .lcdblk_offset = 0x214, 146 .lcdblk_vt_shift = 24, 147 .lcdblk_bypass_shift = 15, 148 .has_shadowcon = 1, 149 .has_vidoutcon = 1, 150 .has_vtsel = 1, 151 .has_dp_clk = 1, 152 }; 153 154 static struct fimd_driver_data exynos5420_fimd_driver_data = { 155 .timing_base = 0x20000, 156 .lcdblk_offset = 0x214, 157 .lcdblk_vt_shift = 24, 158 .lcdblk_bypass_shift = 15, 159 .lcdblk_mic_bypass_shift = 11, 160 .has_shadowcon = 1, 161 .has_vidoutcon = 1, 162 .has_vtsel = 1, 163 .has_mic_bypass = 1, 164 .has_dp_clk = 1, 165 }; 166 167 struct fimd_context { 168 struct device *dev; 169 struct drm_device *drm_dev; 170 struct exynos_drm_crtc *crtc; 171 struct exynos_drm_plane planes[WINDOWS_NR]; 172 struct exynos_drm_plane_config configs[WINDOWS_NR]; 173 struct clk *bus_clk; 174 struct clk *lcd_clk; 175 void __iomem *regs; 176 struct regmap *sysreg; 177 unsigned long irq_flags; 178 u32 vidcon0; 179 u32 vidcon1; 180 u32 vidout_con; 181 u32 i80ifcon; 182 bool i80_if; 183 bool suspended; 184 wait_queue_head_t wait_vsync_queue; 185 atomic_t wait_vsync_event; 186 atomic_t win_updated; 187 atomic_t triggering; 188 u32 clkdiv; 189 190 const struct fimd_driver_data *driver_data; 191 struct drm_encoder *encoder; 192 struct exynos_drm_clk dp_clk; 193 }; 194 195 static const struct of_device_id fimd_driver_dt_match[] = { 196 { .compatible = "samsung,s3c6400-fimd", 197 .data = &s3c64xx_fimd_driver_data }, 198 { .compatible = "samsung,s5pv210-fimd", 199 .data = &s5pv210_fimd_driver_data }, 200 { .compatible = "samsung,exynos3250-fimd", 201 .data = &exynos3_fimd_driver_data }, 202 { .compatible = "samsung,exynos4210-fimd", 203 .data = &exynos4_fimd_driver_data }, 204 { .compatible = "samsung,exynos5250-fimd", 205 .data = &exynos5_fimd_driver_data }, 206 { .compatible = "samsung,exynos5420-fimd", 207 .data = &exynos5420_fimd_driver_data }, 208 {}, 209 }; 210 MODULE_DEVICE_TABLE(of, fimd_driver_dt_match); 211 212 static const enum drm_plane_type fimd_win_types[WINDOWS_NR] = { 213 DRM_PLANE_TYPE_PRIMARY, 214 DRM_PLANE_TYPE_OVERLAY, 215 DRM_PLANE_TYPE_OVERLAY, 216 DRM_PLANE_TYPE_OVERLAY, 217 DRM_PLANE_TYPE_CURSOR, 218 }; 219 220 static const uint32_t fimd_formats[] = { 221 DRM_FORMAT_C8, 222 DRM_FORMAT_XRGB1555, 223 DRM_FORMAT_RGB565, 224 DRM_FORMAT_XRGB8888, 225 DRM_FORMAT_ARGB8888, 226 }; 227 228 static const unsigned int capabilities[WINDOWS_NR] = { 229 0, 230 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, 231 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, 232 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, 233 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, 234 }; 235 236 static inline void fimd_set_bits(struct fimd_context *ctx, u32 reg, u32 mask, 237 u32 val) 238 { 239 val = (val & mask) | (readl(ctx->regs + reg) & ~mask); 240 writel(val, ctx->regs + reg); 241 } 242 243 static int fimd_enable_vblank(struct exynos_drm_crtc *crtc) 244 { 245 struct fimd_context *ctx = crtc->ctx; 246 u32 val; 247 248 if (ctx->suspended) 249 return -EPERM; 250 251 if (!test_and_set_bit(0, &ctx->irq_flags)) { 252 val = readl(ctx->regs + VIDINTCON0); 253 254 val |= VIDINTCON0_INT_ENABLE; 255 256 if (ctx->i80_if) { 257 val |= VIDINTCON0_INT_I80IFDONE; 258 val |= VIDINTCON0_INT_SYSMAINCON; 259 val &= ~VIDINTCON0_INT_SYSSUBCON; 260 } else { 261 val |= VIDINTCON0_INT_FRAME; 262 263 val &= ~VIDINTCON0_FRAMESEL0_MASK; 264 val |= VIDINTCON0_FRAMESEL0_FRONTPORCH; 265 val &= ~VIDINTCON0_FRAMESEL1_MASK; 266 val |= VIDINTCON0_FRAMESEL1_NONE; 267 } 268 269 writel(val, ctx->regs + VIDINTCON0); 270 } 271 272 return 0; 273 } 274 275 static void fimd_disable_vblank(struct exynos_drm_crtc *crtc) 276 { 277 struct fimd_context *ctx = crtc->ctx; 278 u32 val; 279 280 if (ctx->suspended) 281 return; 282 283 if (test_and_clear_bit(0, &ctx->irq_flags)) { 284 val = readl(ctx->regs + VIDINTCON0); 285 286 val &= ~VIDINTCON0_INT_ENABLE; 287 288 if (ctx->i80_if) { 289 val &= ~VIDINTCON0_INT_I80IFDONE; 290 val &= ~VIDINTCON0_INT_SYSMAINCON; 291 val &= ~VIDINTCON0_INT_SYSSUBCON; 292 } else 293 val &= ~VIDINTCON0_INT_FRAME; 294 295 writel(val, ctx->regs + VIDINTCON0); 296 } 297 } 298 299 static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc) 300 { 301 struct fimd_context *ctx = crtc->ctx; 302 303 if (ctx->suspended) 304 return; 305 306 atomic_set(&ctx->wait_vsync_event, 1); 307 308 /* 309 * wait for FIMD to signal VSYNC interrupt or return after 310 * timeout which is set to 50ms (refresh rate of 20). 311 */ 312 if (!wait_event_timeout(ctx->wait_vsync_queue, 313 !atomic_read(&ctx->wait_vsync_event), 314 HZ/20)) 315 DRM_DEV_DEBUG_KMS(ctx->dev, "vblank wait timed out.\n"); 316 } 317 318 static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win, 319 bool enable) 320 { 321 u32 val = readl(ctx->regs + WINCON(win)); 322 323 if (enable) 324 val |= WINCONx_ENWIN; 325 else 326 val &= ~WINCONx_ENWIN; 327 328 writel(val, ctx->regs + WINCON(win)); 329 } 330 331 static void fimd_enable_shadow_channel_path(struct fimd_context *ctx, 332 unsigned int win, 333 bool enable) 334 { 335 u32 val = readl(ctx->regs + SHADOWCON); 336 337 if (enable) 338 val |= SHADOWCON_CHx_ENABLE(win); 339 else 340 val &= ~SHADOWCON_CHx_ENABLE(win); 341 342 writel(val, ctx->regs + SHADOWCON); 343 } 344 345 static void fimd_clear_channels(struct exynos_drm_crtc *crtc) 346 { 347 struct fimd_context *ctx = crtc->ctx; 348 unsigned int win, ch_enabled = 0; 349 350 /* Hardware is in unknown state, so ensure it gets enabled properly */ 351 pm_runtime_get_sync(ctx->dev); 352 353 clk_prepare_enable(ctx->bus_clk); 354 clk_prepare_enable(ctx->lcd_clk); 355 356 /* Check if any channel is enabled. */ 357 for (win = 0; win < WINDOWS_NR; win++) { 358 u32 val = readl(ctx->regs + WINCON(win)); 359 360 if (val & WINCONx_ENWIN) { 361 fimd_enable_video_output(ctx, win, false); 362 363 if (ctx->driver_data->has_shadowcon) 364 fimd_enable_shadow_channel_path(ctx, win, 365 false); 366 367 ch_enabled = 1; 368 } 369 } 370 371 /* Wait for vsync, as disable channel takes effect at next vsync */ 372 if (ch_enabled) { 373 ctx->suspended = false; 374 375 fimd_enable_vblank(ctx->crtc); 376 fimd_wait_for_vblank(ctx->crtc); 377 fimd_disable_vblank(ctx->crtc); 378 379 ctx->suspended = true; 380 } 381 382 clk_disable_unprepare(ctx->lcd_clk); 383 clk_disable_unprepare(ctx->bus_clk); 384 385 pm_runtime_put(ctx->dev); 386 } 387 388 389 static int fimd_atomic_check(struct exynos_drm_crtc *crtc, 390 struct drm_crtc_state *state) 391 { 392 struct drm_display_mode *mode = &state->adjusted_mode; 393 struct fimd_context *ctx = crtc->ctx; 394 unsigned long ideal_clk, lcd_rate; 395 u32 clkdiv; 396 397 if (mode->clock == 0) { 398 DRM_DEV_ERROR(ctx->dev, "Mode has zero clock value.\n"); 399 return -EINVAL; 400 } 401 402 ideal_clk = mode->clock * 1000; 403 404 if (ctx->i80_if) { 405 /* 406 * The frame done interrupt should be occurred prior to the 407 * next TE signal. 408 */ 409 ideal_clk *= 2; 410 } 411 412 lcd_rate = clk_get_rate(ctx->lcd_clk); 413 if (2 * lcd_rate < ideal_clk) { 414 DRM_DEV_ERROR(ctx->dev, 415 "sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n", 416 lcd_rate, ideal_clk); 417 return -EINVAL; 418 } 419 420 /* Find the clock divider value that gets us closest to ideal_clk */ 421 clkdiv = DIV_ROUND_CLOSEST(lcd_rate, ideal_clk); 422 if (clkdiv >= 0x200) { 423 DRM_DEV_ERROR(ctx->dev, "requested pixel clock(%lu) too low\n", 424 ideal_clk); 425 return -EINVAL; 426 } 427 428 ctx->clkdiv = (clkdiv < 0x100) ? clkdiv : 0xff; 429 430 return 0; 431 } 432 433 static void fimd_setup_trigger(struct fimd_context *ctx) 434 { 435 void __iomem *timing_base = ctx->regs + ctx->driver_data->timing_base; 436 u32 trg_type = ctx->driver_data->trg_type; 437 u32 val = readl(timing_base + TRIGCON); 438 439 val &= ~(TRGMODE_ENABLE); 440 441 if (trg_type == I80_HW_TRG) { 442 if (ctx->driver_data->has_hw_trigger) 443 val |= HWTRGEN_ENABLE | HWTRGMASK_ENABLE; 444 if (ctx->driver_data->has_trigger_per_te) 445 val |= HWTRIGEN_PER_ENABLE; 446 } else { 447 val |= TRGMODE_ENABLE; 448 } 449 450 writel(val, timing_base + TRIGCON); 451 } 452 453 static void fimd_commit(struct exynos_drm_crtc *crtc) 454 { 455 struct fimd_context *ctx = crtc->ctx; 456 struct drm_display_mode *mode = &crtc->base.state->adjusted_mode; 457 const struct fimd_driver_data *driver_data = ctx->driver_data; 458 void *timing_base = ctx->regs + driver_data->timing_base; 459 u32 val; 460 461 if (ctx->suspended) 462 return; 463 464 /* nothing to do if we haven't set the mode yet */ 465 if (mode->htotal == 0 || mode->vtotal == 0) 466 return; 467 468 if (ctx->i80_if) { 469 val = ctx->i80ifcon | I80IFEN_ENABLE; 470 writel(val, timing_base + I80IFCONFAx(0)); 471 472 /* disable auto frame rate */ 473 writel(0, timing_base + I80IFCONFBx(0)); 474 475 /* set video type selection to I80 interface */ 476 if (driver_data->has_vtsel && ctx->sysreg && 477 regmap_update_bits(ctx->sysreg, 478 driver_data->lcdblk_offset, 479 0x3 << driver_data->lcdblk_vt_shift, 480 0x1 << driver_data->lcdblk_vt_shift)) { 481 DRM_DEV_ERROR(ctx->dev, 482 "Failed to update sysreg for I80 i/f.\n"); 483 return; 484 } 485 } else { 486 int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd; 487 u32 vidcon1; 488 489 /* setup polarity values */ 490 vidcon1 = ctx->vidcon1; 491 if (mode->flags & DRM_MODE_FLAG_NVSYNC) 492 vidcon1 |= VIDCON1_INV_VSYNC; 493 if (mode->flags & DRM_MODE_FLAG_NHSYNC) 494 vidcon1 |= VIDCON1_INV_HSYNC; 495 writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1); 496 497 /* setup vertical timing values. */ 498 vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; 499 vbpd = mode->crtc_vtotal - mode->crtc_vsync_end; 500 vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay; 501 502 val = VIDTCON0_VBPD(vbpd - 1) | 503 VIDTCON0_VFPD(vfpd - 1) | 504 VIDTCON0_VSPW(vsync_len - 1); 505 writel(val, ctx->regs + driver_data->timing_base + VIDTCON0); 506 507 /* setup horizontal timing values. */ 508 hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; 509 hbpd = mode->crtc_htotal - mode->crtc_hsync_end; 510 hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay; 511 512 val = VIDTCON1_HBPD(hbpd - 1) | 513 VIDTCON1_HFPD(hfpd - 1) | 514 VIDTCON1_HSPW(hsync_len - 1); 515 writel(val, ctx->regs + driver_data->timing_base + VIDTCON1); 516 } 517 518 if (driver_data->has_vidoutcon) 519 writel(ctx->vidout_con, timing_base + VIDOUT_CON); 520 521 /* set bypass selection */ 522 if (ctx->sysreg && regmap_update_bits(ctx->sysreg, 523 driver_data->lcdblk_offset, 524 0x1 << driver_data->lcdblk_bypass_shift, 525 0x1 << driver_data->lcdblk_bypass_shift)) { 526 DRM_DEV_ERROR(ctx->dev, 527 "Failed to update sysreg for bypass setting.\n"); 528 return; 529 } 530 531 /* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass 532 * bit should be cleared. 533 */ 534 if (driver_data->has_mic_bypass && ctx->sysreg && 535 regmap_update_bits(ctx->sysreg, 536 driver_data->lcdblk_offset, 537 0x1 << driver_data->lcdblk_mic_bypass_shift, 538 0x1 << driver_data->lcdblk_mic_bypass_shift)) { 539 DRM_DEV_ERROR(ctx->dev, 540 "Failed to update sysreg for bypass mic.\n"); 541 return; 542 } 543 544 /* setup horizontal and vertical display size. */ 545 val = VIDTCON2_LINEVAL(mode->vdisplay - 1) | 546 VIDTCON2_HOZVAL(mode->hdisplay - 1) | 547 VIDTCON2_LINEVAL_E(mode->vdisplay - 1) | 548 VIDTCON2_HOZVAL_E(mode->hdisplay - 1); 549 writel(val, ctx->regs + driver_data->timing_base + VIDTCON2); 550 551 fimd_setup_trigger(ctx); 552 553 /* 554 * fields of register with prefix '_F' would be updated 555 * at vsync(same as dma start) 556 */ 557 val = ctx->vidcon0; 558 val |= VIDCON0_ENVID | VIDCON0_ENVID_F; 559 560 if (ctx->driver_data->has_clksel) 561 val |= VIDCON0_CLKSEL_LCD; 562 563 if (ctx->clkdiv > 1) 564 val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR; 565 566 writel(val, ctx->regs + VIDCON0); 567 } 568 569 static void fimd_win_set_bldeq(struct fimd_context *ctx, unsigned int win, 570 unsigned int alpha, unsigned int pixel_alpha) 571 { 572 u32 mask = BLENDEQ_A_FUNC_F(0xf) | BLENDEQ_B_FUNC_F(0xf); 573 u32 val = 0; 574 575 switch (pixel_alpha) { 576 case DRM_MODE_BLEND_PIXEL_NONE: 577 case DRM_MODE_BLEND_COVERAGE: 578 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA_A); 579 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A); 580 break; 581 case DRM_MODE_BLEND_PREMULTI: 582 default: 583 if (alpha != DRM_BLEND_ALPHA_OPAQUE) { 584 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA0); 585 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A); 586 } else { 587 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ONE); 588 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A); 589 } 590 break; 591 } 592 fimd_set_bits(ctx, BLENDEQx(win), mask, val); 593 } 594 595 static void fimd_win_set_bldmod(struct fimd_context *ctx, unsigned int win, 596 unsigned int alpha, unsigned int pixel_alpha) 597 { 598 u32 win_alpha_l = (alpha >> 8) & 0xf; 599 u32 win_alpha_h = alpha >> 12; 600 u32 val = 0; 601 602 switch (pixel_alpha) { 603 case DRM_MODE_BLEND_PIXEL_NONE: 604 break; 605 case DRM_MODE_BLEND_COVERAGE: 606 case DRM_MODE_BLEND_PREMULTI: 607 default: 608 val |= WINCON1_ALPHA_SEL; 609 val |= WINCON1_BLD_PIX; 610 val |= WINCON1_ALPHA_MUL; 611 break; 612 } 613 fimd_set_bits(ctx, WINCON(win), WINCONx_BLEND_MODE_MASK, val); 614 615 /* OSD alpha */ 616 val = VIDISD14C_ALPHA0_R(win_alpha_h) | 617 VIDISD14C_ALPHA0_G(win_alpha_h) | 618 VIDISD14C_ALPHA0_B(win_alpha_h) | 619 VIDISD14C_ALPHA1_R(0x0) | 620 VIDISD14C_ALPHA1_G(0x0) | 621 VIDISD14C_ALPHA1_B(0x0); 622 writel(val, ctx->regs + VIDOSD_C(win)); 623 624 val = VIDW_ALPHA_R(win_alpha_l) | VIDW_ALPHA_G(win_alpha_l) | 625 VIDW_ALPHA_B(win_alpha_l); 626 writel(val, ctx->regs + VIDWnALPHA0(win)); 627 628 val = VIDW_ALPHA_R(0x0) | VIDW_ALPHA_G(0x0) | 629 VIDW_ALPHA_B(0x0); 630 writel(val, ctx->regs + VIDWnALPHA1(win)); 631 632 fimd_set_bits(ctx, BLENDCON, BLENDCON_NEW_MASK, 633 BLENDCON_NEW_8BIT_ALPHA_VALUE); 634 } 635 636 static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win, 637 struct drm_framebuffer *fb, int width) 638 { 639 struct exynos_drm_plane plane = ctx->planes[win]; 640 struct exynos_drm_plane_state *state = 641 to_exynos_plane_state(plane.base.state); 642 uint32_t pixel_format = fb->format->format; 643 unsigned int alpha = state->base.alpha; 644 u32 val = WINCONx_ENWIN; 645 unsigned int pixel_alpha; 646 647 if (fb->format->has_alpha) 648 pixel_alpha = state->base.pixel_blend_mode; 649 else 650 pixel_alpha = DRM_MODE_BLEND_PIXEL_NONE; 651 652 /* 653 * In case of s3c64xx, window 0 doesn't support alpha channel. 654 * So the request format is ARGB8888 then change it to XRGB8888. 655 */ 656 if (ctx->driver_data->has_limited_fmt && !win) { 657 if (pixel_format == DRM_FORMAT_ARGB8888) 658 pixel_format = DRM_FORMAT_XRGB8888; 659 } 660 661 switch (pixel_format) { 662 case DRM_FORMAT_C8: 663 val |= WINCON0_BPPMODE_8BPP_PALETTE; 664 val |= WINCONx_BURSTLEN_8WORD; 665 val |= WINCONx_BYTSWP; 666 break; 667 case DRM_FORMAT_XRGB1555: 668 val |= WINCON0_BPPMODE_16BPP_1555; 669 val |= WINCONx_HAWSWP; 670 val |= WINCONx_BURSTLEN_16WORD; 671 break; 672 case DRM_FORMAT_RGB565: 673 val |= WINCON0_BPPMODE_16BPP_565; 674 val |= WINCONx_HAWSWP; 675 val |= WINCONx_BURSTLEN_16WORD; 676 break; 677 case DRM_FORMAT_XRGB8888: 678 val |= WINCON0_BPPMODE_24BPP_888; 679 val |= WINCONx_WSWP; 680 val |= WINCONx_BURSTLEN_16WORD; 681 break; 682 case DRM_FORMAT_ARGB8888: 683 default: 684 val |= WINCON1_BPPMODE_25BPP_A1888; 685 val |= WINCONx_WSWP; 686 val |= WINCONx_BURSTLEN_16WORD; 687 break; 688 } 689 690 /* 691 * Setting dma-burst to 16Word causes permanent tearing for very small 692 * buffers, e.g. cursor buffer. Burst Mode switching which based on 693 * plane size is not recommended as plane size varies alot towards the 694 * end of the screen and rapid movement causes unstable DMA, but it is 695 * still better to change dma-burst than displaying garbage. 696 */ 697 698 if (width < MIN_FB_WIDTH_FOR_16WORD_BURST) { 699 val &= ~WINCONx_BURSTLEN_MASK; 700 val |= WINCONx_BURSTLEN_4WORD; 701 } 702 fimd_set_bits(ctx, WINCON(win), ~WINCONx_BLEND_MODE_MASK, val); 703 704 /* hardware window 0 doesn't support alpha channel. */ 705 if (win != 0) { 706 fimd_win_set_bldmod(ctx, win, alpha, pixel_alpha); 707 fimd_win_set_bldeq(ctx, win, alpha, pixel_alpha); 708 } 709 } 710 711 static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win) 712 { 713 unsigned int keycon0 = 0, keycon1 = 0; 714 715 keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F | 716 WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0); 717 718 keycon1 = WxKEYCON1_COLVAL(0xffffffff); 719 720 writel(keycon0, ctx->regs + WKEYCON0_BASE(win)); 721 writel(keycon1, ctx->regs + WKEYCON1_BASE(win)); 722 } 723 724 /** 725 * shadow_protect_win() - disable updating values from shadow registers at vsync 726 * 727 * @win: window to protect registers for 728 * @protect: 1 to protect (disable updates) 729 */ 730 static void fimd_shadow_protect_win(struct fimd_context *ctx, 731 unsigned int win, bool protect) 732 { 733 u32 reg, bits, val; 734 735 /* 736 * SHADOWCON/PRTCON register is used for enabling timing. 737 * 738 * for example, once only width value of a register is set, 739 * if the dma is started then fimd hardware could malfunction so 740 * with protect window setting, the register fields with prefix '_F' 741 * wouldn't be updated at vsync also but updated once unprotect window 742 * is set. 743 */ 744 745 if (ctx->driver_data->has_shadowcon) { 746 reg = SHADOWCON; 747 bits = SHADOWCON_WINx_PROTECT(win); 748 } else { 749 reg = PRTCON; 750 bits = PRTCON_PROTECT; 751 } 752 753 val = readl(ctx->regs + reg); 754 if (protect) 755 val |= bits; 756 else 757 val &= ~bits; 758 writel(val, ctx->regs + reg); 759 } 760 761 static void fimd_atomic_begin(struct exynos_drm_crtc *crtc) 762 { 763 struct fimd_context *ctx = crtc->ctx; 764 int i; 765 766 if (ctx->suspended) 767 return; 768 769 for (i = 0; i < WINDOWS_NR; i++) 770 fimd_shadow_protect_win(ctx, i, true); 771 } 772 773 static void fimd_atomic_flush(struct exynos_drm_crtc *crtc) 774 { 775 struct fimd_context *ctx = crtc->ctx; 776 int i; 777 778 if (ctx->suspended) 779 return; 780 781 for (i = 0; i < WINDOWS_NR; i++) 782 fimd_shadow_protect_win(ctx, i, false); 783 784 exynos_crtc_handle_event(crtc); 785 } 786 787 static void fimd_update_plane(struct exynos_drm_crtc *crtc, 788 struct exynos_drm_plane *plane) 789 { 790 struct exynos_drm_plane_state *state = 791 to_exynos_plane_state(plane->base.state); 792 struct fimd_context *ctx = crtc->ctx; 793 struct drm_framebuffer *fb = state->base.fb; 794 dma_addr_t dma_addr; 795 unsigned long val, size, offset; 796 unsigned int last_x, last_y, buf_offsize, line_size; 797 unsigned int win = plane->index; 798 unsigned int cpp = fb->format->cpp[0]; 799 unsigned int pitch = fb->pitches[0]; 800 801 if (ctx->suspended) 802 return; 803 804 offset = state->src.x * cpp; 805 offset += state->src.y * pitch; 806 807 /* buffer start address */ 808 dma_addr = exynos_drm_fb_dma_addr(fb, 0) + offset; 809 val = (unsigned long)dma_addr; 810 writel(val, ctx->regs + VIDWx_BUF_START(win, 0)); 811 812 /* buffer end address */ 813 size = pitch * state->crtc.h; 814 val = (unsigned long)(dma_addr + size); 815 writel(val, ctx->regs + VIDWx_BUF_END(win, 0)); 816 817 DRM_DEV_DEBUG_KMS(ctx->dev, 818 "start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n", 819 (unsigned long)dma_addr, val, size); 820 DRM_DEV_DEBUG_KMS(ctx->dev, "ovl_width = %d, ovl_height = %d\n", 821 state->crtc.w, state->crtc.h); 822 823 /* buffer size */ 824 buf_offsize = pitch - (state->crtc.w * cpp); 825 line_size = state->crtc.w * cpp; 826 val = VIDW_BUF_SIZE_OFFSET(buf_offsize) | 827 VIDW_BUF_SIZE_PAGEWIDTH(line_size) | 828 VIDW_BUF_SIZE_OFFSET_E(buf_offsize) | 829 VIDW_BUF_SIZE_PAGEWIDTH_E(line_size); 830 writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0)); 831 832 /* OSD position */ 833 val = VIDOSDxA_TOPLEFT_X(state->crtc.x) | 834 VIDOSDxA_TOPLEFT_Y(state->crtc.y) | 835 VIDOSDxA_TOPLEFT_X_E(state->crtc.x) | 836 VIDOSDxA_TOPLEFT_Y_E(state->crtc.y); 837 writel(val, ctx->regs + VIDOSD_A(win)); 838 839 last_x = state->crtc.x + state->crtc.w; 840 if (last_x) 841 last_x--; 842 last_y = state->crtc.y + state->crtc.h; 843 if (last_y) 844 last_y--; 845 846 val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) | 847 VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y); 848 849 writel(val, ctx->regs + VIDOSD_B(win)); 850 851 DRM_DEV_DEBUG_KMS(ctx->dev, 852 "osd pos: tx = %d, ty = %d, bx = %d, by = %d\n", 853 state->crtc.x, state->crtc.y, last_x, last_y); 854 855 /* OSD size */ 856 if (win != 3 && win != 4) { 857 u32 offset = VIDOSD_D(win); 858 if (win == 0) 859 offset = VIDOSD_C(win); 860 val = state->crtc.w * state->crtc.h; 861 writel(val, ctx->regs + offset); 862 863 DRM_DEV_DEBUG_KMS(ctx->dev, "osd size = 0x%x\n", 864 (unsigned int)val); 865 } 866 867 fimd_win_set_pixfmt(ctx, win, fb, state->src.w); 868 869 /* hardware window 0 doesn't support color key. */ 870 if (win != 0) 871 fimd_win_set_colkey(ctx, win); 872 873 fimd_enable_video_output(ctx, win, true); 874 875 if (ctx->driver_data->has_shadowcon) 876 fimd_enable_shadow_channel_path(ctx, win, true); 877 878 if (ctx->i80_if) 879 atomic_set(&ctx->win_updated, 1); 880 } 881 882 static void fimd_disable_plane(struct exynos_drm_crtc *crtc, 883 struct exynos_drm_plane *plane) 884 { 885 struct fimd_context *ctx = crtc->ctx; 886 unsigned int win = plane->index; 887 888 if (ctx->suspended) 889 return; 890 891 fimd_enable_video_output(ctx, win, false); 892 893 if (ctx->driver_data->has_shadowcon) 894 fimd_enable_shadow_channel_path(ctx, win, false); 895 } 896 897 static void fimd_enable(struct exynos_drm_crtc *crtc) 898 { 899 struct fimd_context *ctx = crtc->ctx; 900 901 if (!ctx->suspended) 902 return; 903 904 ctx->suspended = false; 905 906 pm_runtime_get_sync(ctx->dev); 907 908 /* if vblank was enabled status, enable it again. */ 909 if (test_and_clear_bit(0, &ctx->irq_flags)) 910 fimd_enable_vblank(ctx->crtc); 911 912 fimd_commit(ctx->crtc); 913 } 914 915 static void fimd_disable(struct exynos_drm_crtc *crtc) 916 { 917 struct fimd_context *ctx = crtc->ctx; 918 int i; 919 920 if (ctx->suspended) 921 return; 922 923 /* 924 * We need to make sure that all windows are disabled before we 925 * suspend that connector. Otherwise we might try to scan from 926 * a destroyed buffer later. 927 */ 928 for (i = 0; i < WINDOWS_NR; i++) 929 fimd_disable_plane(crtc, &ctx->planes[i]); 930 931 fimd_enable_vblank(crtc); 932 fimd_wait_for_vblank(crtc); 933 fimd_disable_vblank(crtc); 934 935 writel(0, ctx->regs + VIDCON0); 936 937 pm_runtime_put_sync(ctx->dev); 938 ctx->suspended = true; 939 } 940 941 static void fimd_trigger(struct device *dev) 942 { 943 struct fimd_context *ctx = dev_get_drvdata(dev); 944 const struct fimd_driver_data *driver_data = ctx->driver_data; 945 void *timing_base = ctx->regs + driver_data->timing_base; 946 u32 reg; 947 948 /* 949 * Skips triggering if in triggering state, because multiple triggering 950 * requests can cause panel reset. 951 */ 952 if (atomic_read(&ctx->triggering)) 953 return; 954 955 /* Enters triggering mode */ 956 atomic_set(&ctx->triggering, 1); 957 958 reg = readl(timing_base + TRIGCON); 959 reg |= (TRGMODE_ENABLE | SWTRGCMD_ENABLE); 960 writel(reg, timing_base + TRIGCON); 961 962 /* 963 * Exits triggering mode if vblank is not enabled yet, because when the 964 * VIDINTCON0 register is not set, it can not exit from triggering mode. 965 */ 966 if (!test_bit(0, &ctx->irq_flags)) 967 atomic_set(&ctx->triggering, 0); 968 } 969 970 static void fimd_te_handler(struct exynos_drm_crtc *crtc) 971 { 972 struct fimd_context *ctx = crtc->ctx; 973 u32 trg_type = ctx->driver_data->trg_type; 974 975 /* Checks the crtc is detached already from encoder */ 976 if (!ctx->drm_dev) 977 return; 978 979 if (trg_type == I80_HW_TRG) 980 goto out; 981 982 /* 983 * If there is a page flip request, triggers and handles the page flip 984 * event so that current fb can be updated into panel GRAM. 985 */ 986 if (atomic_add_unless(&ctx->win_updated, -1, 0)) 987 fimd_trigger(ctx->dev); 988 989 out: 990 /* Wakes up vsync event queue */ 991 if (atomic_read(&ctx->wait_vsync_event)) { 992 atomic_set(&ctx->wait_vsync_event, 0); 993 wake_up(&ctx->wait_vsync_queue); 994 } 995 996 if (test_bit(0, &ctx->irq_flags)) 997 drm_crtc_handle_vblank(&ctx->crtc->base); 998 } 999 1000 static void fimd_dp_clock_enable(struct exynos_drm_clk *clk, bool enable) 1001 { 1002 struct fimd_context *ctx = container_of(clk, struct fimd_context, 1003 dp_clk); 1004 u32 val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE; 1005 writel(val, ctx->regs + DP_MIE_CLKCON); 1006 } 1007 1008 static const struct exynos_drm_crtc_ops fimd_crtc_ops = { 1009 .enable = fimd_enable, 1010 .disable = fimd_disable, 1011 .enable_vblank = fimd_enable_vblank, 1012 .disable_vblank = fimd_disable_vblank, 1013 .atomic_begin = fimd_atomic_begin, 1014 .update_plane = fimd_update_plane, 1015 .disable_plane = fimd_disable_plane, 1016 .atomic_flush = fimd_atomic_flush, 1017 .atomic_check = fimd_atomic_check, 1018 .te_handler = fimd_te_handler, 1019 }; 1020 1021 static irqreturn_t fimd_irq_handler(int irq, void *dev_id) 1022 { 1023 struct fimd_context *ctx = (struct fimd_context *)dev_id; 1024 u32 val, clear_bit; 1025 1026 val = readl(ctx->regs + VIDINTCON1); 1027 1028 clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME; 1029 if (val & clear_bit) 1030 writel(clear_bit, ctx->regs + VIDINTCON1); 1031 1032 /* check the crtc is detached already from encoder */ 1033 if (!ctx->drm_dev) 1034 goto out; 1035 1036 if (!ctx->i80_if) 1037 drm_crtc_handle_vblank(&ctx->crtc->base); 1038 1039 if (ctx->i80_if) { 1040 /* Exits triggering mode */ 1041 atomic_set(&ctx->triggering, 0); 1042 } else { 1043 /* set wait vsync event to zero and wake up queue. */ 1044 if (atomic_read(&ctx->wait_vsync_event)) { 1045 atomic_set(&ctx->wait_vsync_event, 0); 1046 wake_up(&ctx->wait_vsync_queue); 1047 } 1048 } 1049 1050 out: 1051 return IRQ_HANDLED; 1052 } 1053 1054 static int fimd_bind(struct device *dev, struct device *master, void *data) 1055 { 1056 struct fimd_context *ctx = dev_get_drvdata(dev); 1057 struct drm_device *drm_dev = data; 1058 struct exynos_drm_plane *exynos_plane; 1059 unsigned int i; 1060 int ret; 1061 1062 ctx->drm_dev = drm_dev; 1063 1064 for (i = 0; i < WINDOWS_NR; i++) { 1065 ctx->configs[i].pixel_formats = fimd_formats; 1066 ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats); 1067 ctx->configs[i].zpos = i; 1068 ctx->configs[i].type = fimd_win_types[i]; 1069 ctx->configs[i].capabilities = capabilities[i]; 1070 ret = exynos_plane_init(drm_dev, &ctx->planes[i], i, 1071 &ctx->configs[i]); 1072 if (ret) 1073 return ret; 1074 } 1075 1076 exynos_plane = &ctx->planes[DEFAULT_WIN]; 1077 ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base, 1078 EXYNOS_DISPLAY_TYPE_LCD, &fimd_crtc_ops, ctx); 1079 if (IS_ERR(ctx->crtc)) 1080 return PTR_ERR(ctx->crtc); 1081 1082 if (ctx->driver_data->has_dp_clk) { 1083 ctx->dp_clk.enable = fimd_dp_clock_enable; 1084 ctx->crtc->pipe_clk = &ctx->dp_clk; 1085 } 1086 1087 if (ctx->encoder) 1088 exynos_dpi_bind(drm_dev, ctx->encoder); 1089 1090 if (is_drm_iommu_supported(drm_dev)) 1091 fimd_clear_channels(ctx->crtc); 1092 1093 return exynos_drm_register_dma(drm_dev, dev); 1094 } 1095 1096 static void fimd_unbind(struct device *dev, struct device *master, 1097 void *data) 1098 { 1099 struct fimd_context *ctx = dev_get_drvdata(dev); 1100 1101 fimd_disable(ctx->crtc); 1102 1103 exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev); 1104 1105 if (ctx->encoder) 1106 exynos_dpi_remove(ctx->encoder); 1107 } 1108 1109 static const struct component_ops fimd_component_ops = { 1110 .bind = fimd_bind, 1111 .unbind = fimd_unbind, 1112 }; 1113 1114 static int fimd_probe(struct platform_device *pdev) 1115 { 1116 struct device *dev = &pdev->dev; 1117 struct fimd_context *ctx; 1118 struct device_node *i80_if_timings; 1119 struct resource *res; 1120 int ret; 1121 1122 if (!dev->of_node) 1123 return -ENODEV; 1124 1125 ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); 1126 if (!ctx) 1127 return -ENOMEM; 1128 1129 ctx->dev = dev; 1130 ctx->suspended = true; 1131 ctx->driver_data = of_device_get_match_data(dev); 1132 1133 if (of_property_read_bool(dev->of_node, "samsung,invert-vden")) 1134 ctx->vidcon1 |= VIDCON1_INV_VDEN; 1135 if (of_property_read_bool(dev->of_node, "samsung,invert-vclk")) 1136 ctx->vidcon1 |= VIDCON1_INV_VCLK; 1137 1138 i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings"); 1139 if (i80_if_timings) { 1140 u32 val; 1141 1142 ctx->i80_if = true; 1143 1144 if (ctx->driver_data->has_vidoutcon) 1145 ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0; 1146 else 1147 ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0; 1148 /* 1149 * The user manual describes that this "DSI_EN" bit is required 1150 * to enable I80 24-bit data interface. 1151 */ 1152 ctx->vidcon0 |= VIDCON0_DSI_EN; 1153 1154 if (of_property_read_u32(i80_if_timings, "cs-setup", &val)) 1155 val = 0; 1156 ctx->i80ifcon = LCD_CS_SETUP(val); 1157 if (of_property_read_u32(i80_if_timings, "wr-setup", &val)) 1158 val = 0; 1159 ctx->i80ifcon |= LCD_WR_SETUP(val); 1160 if (of_property_read_u32(i80_if_timings, "wr-active", &val)) 1161 val = 1; 1162 ctx->i80ifcon |= LCD_WR_ACTIVE(val); 1163 if (of_property_read_u32(i80_if_timings, "wr-hold", &val)) 1164 val = 0; 1165 ctx->i80ifcon |= LCD_WR_HOLD(val); 1166 } 1167 of_node_put(i80_if_timings); 1168 1169 ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, 1170 "samsung,sysreg"); 1171 if (IS_ERR(ctx->sysreg)) { 1172 dev_warn(dev, "failed to get system register.\n"); 1173 ctx->sysreg = NULL; 1174 } 1175 1176 ctx->bus_clk = devm_clk_get(dev, "fimd"); 1177 if (IS_ERR(ctx->bus_clk)) { 1178 dev_err(dev, "failed to get bus clock\n"); 1179 return PTR_ERR(ctx->bus_clk); 1180 } 1181 1182 ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd"); 1183 if (IS_ERR(ctx->lcd_clk)) { 1184 dev_err(dev, "failed to get lcd clock\n"); 1185 return PTR_ERR(ctx->lcd_clk); 1186 } 1187 1188 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1189 1190 ctx->regs = devm_ioremap_resource(dev, res); 1191 if (IS_ERR(ctx->regs)) 1192 return PTR_ERR(ctx->regs); 1193 1194 res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, 1195 ctx->i80_if ? "lcd_sys" : "vsync"); 1196 if (!res) { 1197 dev_err(dev, "irq request failed.\n"); 1198 return -ENXIO; 1199 } 1200 1201 ret = devm_request_irq(dev, res->start, fimd_irq_handler, 1202 0, "drm_fimd", ctx); 1203 if (ret) { 1204 dev_err(dev, "irq request failed.\n"); 1205 return ret; 1206 } 1207 1208 init_waitqueue_head(&ctx->wait_vsync_queue); 1209 atomic_set(&ctx->wait_vsync_event, 0); 1210 1211 platform_set_drvdata(pdev, ctx); 1212 1213 ctx->encoder = exynos_dpi_probe(dev); 1214 if (IS_ERR(ctx->encoder)) 1215 return PTR_ERR(ctx->encoder); 1216 1217 pm_runtime_enable(dev); 1218 1219 ret = component_add(dev, &fimd_component_ops); 1220 if (ret) 1221 goto err_disable_pm_runtime; 1222 1223 return ret; 1224 1225 err_disable_pm_runtime: 1226 pm_runtime_disable(dev); 1227 1228 return ret; 1229 } 1230 1231 static int fimd_remove(struct platform_device *pdev) 1232 { 1233 pm_runtime_disable(&pdev->dev); 1234 1235 component_del(&pdev->dev, &fimd_component_ops); 1236 1237 return 0; 1238 } 1239 1240 #ifdef CONFIG_PM 1241 static int exynos_fimd_suspend(struct device *dev) 1242 { 1243 struct fimd_context *ctx = dev_get_drvdata(dev); 1244 1245 clk_disable_unprepare(ctx->lcd_clk); 1246 clk_disable_unprepare(ctx->bus_clk); 1247 1248 return 0; 1249 } 1250 1251 static int exynos_fimd_resume(struct device *dev) 1252 { 1253 struct fimd_context *ctx = dev_get_drvdata(dev); 1254 int ret; 1255 1256 ret = clk_prepare_enable(ctx->bus_clk); 1257 if (ret < 0) { 1258 DRM_DEV_ERROR(dev, 1259 "Failed to prepare_enable the bus clk [%d]\n", 1260 ret); 1261 return ret; 1262 } 1263 1264 ret = clk_prepare_enable(ctx->lcd_clk); 1265 if (ret < 0) { 1266 DRM_DEV_ERROR(dev, 1267 "Failed to prepare_enable the lcd clk [%d]\n", 1268 ret); 1269 return ret; 1270 } 1271 1272 return 0; 1273 } 1274 #endif 1275 1276 static const struct dev_pm_ops exynos_fimd_pm_ops = { 1277 SET_RUNTIME_PM_OPS(exynos_fimd_suspend, exynos_fimd_resume, NULL) 1278 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, 1279 pm_runtime_force_resume) 1280 }; 1281 1282 struct platform_driver fimd_driver = { 1283 .probe = fimd_probe, 1284 .remove = fimd_remove, 1285 .driver = { 1286 .name = "exynos4-fb", 1287 .owner = THIS_MODULE, 1288 .pm = &exynos_fimd_pm_ops, 1289 .of_match_table = fimd_driver_dt_match, 1290 }, 1291 }; 1292