1 /* drivers/gpu/drm/exynos/exynos7_drm_decon.c 2 * 3 * Copyright (C) 2014 Samsung Electronics Co.Ltd 4 * Authors: 5 * Akshu Agarwal <akshua@gmail.com> 6 * Ajay Kumar <ajaykumar.rs@samsung.com> 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 * 13 */ 14 #include <drm/drmP.h> 15 #include <drm/exynos_drm.h> 16 17 #include <linux/clk.h> 18 #include <linux/component.h> 19 #include <linux/kernel.h> 20 #include <linux/of.h> 21 #include <linux/of_address.h> 22 #include <linux/of_device.h> 23 #include <linux/platform_device.h> 24 #include <linux/pm_runtime.h> 25 26 #include <video/of_display_timing.h> 27 #include <video/of_videomode.h> 28 #include <video/exynos7_decon.h> 29 30 #include "exynos_drm_crtc.h" 31 #include "exynos_drm_plane.h" 32 #include "exynos_drm_drv.h" 33 #include "exynos_drm_fbdev.h" 34 #include "exynos_drm_iommu.h" 35 36 /* 37 * DECON stands for Display and Enhancement controller. 38 */ 39 40 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 41 42 #define WINDOWS_NR 2 43 44 struct decon_context { 45 struct device *dev; 46 struct drm_device *drm_dev; 47 struct exynos_drm_crtc *crtc; 48 struct exynos_drm_plane planes[WINDOWS_NR]; 49 struct clk *pclk; 50 struct clk *aclk; 51 struct clk *eclk; 52 struct clk *vclk; 53 void __iomem *regs; 54 unsigned int default_win; 55 unsigned long irq_flags; 56 bool i80_if; 57 bool suspended; 58 int pipe; 59 wait_queue_head_t wait_vsync_queue; 60 atomic_t wait_vsync_event; 61 62 struct exynos_drm_panel_info panel; 63 struct drm_encoder *encoder; 64 }; 65 66 static const struct of_device_id decon_driver_dt_match[] = { 67 {.compatible = "samsung,exynos7-decon"}, 68 {}, 69 }; 70 MODULE_DEVICE_TABLE(of, decon_driver_dt_match); 71 72 static const uint32_t decon_formats[] = { 73 DRM_FORMAT_RGB565, 74 DRM_FORMAT_XRGB8888, 75 DRM_FORMAT_XBGR8888, 76 DRM_FORMAT_RGBX8888, 77 DRM_FORMAT_BGRX8888, 78 DRM_FORMAT_ARGB8888, 79 DRM_FORMAT_ABGR8888, 80 DRM_FORMAT_RGBA8888, 81 DRM_FORMAT_BGRA8888, 82 }; 83 84 static void decon_wait_for_vblank(struct exynos_drm_crtc *crtc) 85 { 86 struct decon_context *ctx = crtc->ctx; 87 88 if (ctx->suspended) 89 return; 90 91 atomic_set(&ctx->wait_vsync_event, 1); 92 93 /* 94 * wait for DECON to signal VSYNC interrupt or return after 95 * timeout which is set to 50ms (refresh rate of 20). 96 */ 97 if (!wait_event_timeout(ctx->wait_vsync_queue, 98 !atomic_read(&ctx->wait_vsync_event), 99 HZ/20)) 100 DRM_DEBUG_KMS("vblank wait timed out.\n"); 101 } 102 103 static void decon_clear_channels(struct exynos_drm_crtc *crtc) 104 { 105 struct decon_context *ctx = crtc->ctx; 106 unsigned int win, ch_enabled = 0; 107 108 DRM_DEBUG_KMS("%s\n", __FILE__); 109 110 /* Check if any channel is enabled. */ 111 for (win = 0; win < WINDOWS_NR; win++) { 112 u32 val = readl(ctx->regs + WINCON(win)); 113 114 if (val & WINCONx_ENWIN) { 115 val &= ~WINCONx_ENWIN; 116 writel(val, ctx->regs + WINCON(win)); 117 ch_enabled = 1; 118 } 119 } 120 121 /* Wait for vsync, as disable channel takes effect at next vsync */ 122 if (ch_enabled) { 123 unsigned int state = ctx->suspended; 124 125 ctx->suspended = 0; 126 decon_wait_for_vblank(ctx->crtc); 127 ctx->suspended = state; 128 } 129 } 130 131 static int decon_ctx_initialize(struct decon_context *ctx, 132 struct drm_device *drm_dev) 133 { 134 struct exynos_drm_private *priv = drm_dev->dev_private; 135 int ret; 136 137 ctx->drm_dev = drm_dev; 138 ctx->pipe = priv->pipe++; 139 140 decon_clear_channels(ctx->crtc); 141 142 ret = drm_iommu_attach_device(drm_dev, ctx->dev); 143 if (ret) 144 priv->pipe--; 145 146 return ret; 147 } 148 149 static void decon_ctx_remove(struct decon_context *ctx) 150 { 151 /* detach this sub driver from iommu mapping if supported. */ 152 drm_iommu_detach_device(ctx->drm_dev, ctx->dev); 153 } 154 155 static u32 decon_calc_clkdiv(struct decon_context *ctx, 156 const struct drm_display_mode *mode) 157 { 158 unsigned long ideal_clk = mode->htotal * mode->vtotal * mode->vrefresh; 159 u32 clkdiv; 160 161 /* Find the clock divider value that gets us closest to ideal_clk */ 162 clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->vclk), ideal_clk); 163 164 return (clkdiv < 0x100) ? clkdiv : 0xff; 165 } 166 167 static void decon_commit(struct exynos_drm_crtc *crtc) 168 { 169 struct decon_context *ctx = crtc->ctx; 170 struct drm_display_mode *mode = &crtc->base.state->adjusted_mode; 171 u32 val, clkdiv; 172 173 if (ctx->suspended) 174 return; 175 176 /* nothing to do if we haven't set the mode yet */ 177 if (mode->htotal == 0 || mode->vtotal == 0) 178 return; 179 180 if (!ctx->i80_if) { 181 int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd; 182 /* setup vertical timing values. */ 183 vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; 184 vbpd = mode->crtc_vtotal - mode->crtc_vsync_end; 185 vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay; 186 187 val = VIDTCON0_VBPD(vbpd - 1) | VIDTCON0_VFPD(vfpd - 1); 188 writel(val, ctx->regs + VIDTCON0); 189 190 val = VIDTCON1_VSPW(vsync_len - 1); 191 writel(val, ctx->regs + VIDTCON1); 192 193 /* setup horizontal timing values. */ 194 hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; 195 hbpd = mode->crtc_htotal - mode->crtc_hsync_end; 196 hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay; 197 198 /* setup horizontal timing values. */ 199 val = VIDTCON2_HBPD(hbpd - 1) | VIDTCON2_HFPD(hfpd - 1); 200 writel(val, ctx->regs + VIDTCON2); 201 202 val = VIDTCON3_HSPW(hsync_len - 1); 203 writel(val, ctx->regs + VIDTCON3); 204 } 205 206 /* setup horizontal and vertical display size. */ 207 val = VIDTCON4_LINEVAL(mode->vdisplay - 1) | 208 VIDTCON4_HOZVAL(mode->hdisplay - 1); 209 writel(val, ctx->regs + VIDTCON4); 210 211 writel(mode->vdisplay - 1, ctx->regs + LINECNT_OP_THRESHOLD); 212 213 /* 214 * fields of register with prefix '_F' would be updated 215 * at vsync(same as dma start) 216 */ 217 val = VIDCON0_ENVID | VIDCON0_ENVID_F; 218 writel(val, ctx->regs + VIDCON0); 219 220 clkdiv = decon_calc_clkdiv(ctx, mode); 221 if (clkdiv > 1) { 222 val = VCLKCON1_CLKVAL_NUM_VCLK(clkdiv - 1); 223 writel(val, ctx->regs + VCLKCON1); 224 writel(val, ctx->regs + VCLKCON2); 225 } 226 227 val = readl(ctx->regs + DECON_UPDATE); 228 val |= DECON_UPDATE_STANDALONE_F; 229 writel(val, ctx->regs + DECON_UPDATE); 230 } 231 232 static int decon_enable_vblank(struct exynos_drm_crtc *crtc) 233 { 234 struct decon_context *ctx = crtc->ctx; 235 u32 val; 236 237 if (ctx->suspended) 238 return -EPERM; 239 240 if (!test_and_set_bit(0, &ctx->irq_flags)) { 241 val = readl(ctx->regs + VIDINTCON0); 242 243 val |= VIDINTCON0_INT_ENABLE; 244 245 if (!ctx->i80_if) { 246 val |= VIDINTCON0_INT_FRAME; 247 val &= ~VIDINTCON0_FRAMESEL0_MASK; 248 val |= VIDINTCON0_FRAMESEL0_VSYNC; 249 } 250 251 writel(val, ctx->regs + VIDINTCON0); 252 } 253 254 return 0; 255 } 256 257 static void decon_disable_vblank(struct exynos_drm_crtc *crtc) 258 { 259 struct decon_context *ctx = crtc->ctx; 260 u32 val; 261 262 if (ctx->suspended) 263 return; 264 265 if (test_and_clear_bit(0, &ctx->irq_flags)) { 266 val = readl(ctx->regs + VIDINTCON0); 267 268 val &= ~VIDINTCON0_INT_ENABLE; 269 if (!ctx->i80_if) 270 val &= ~VIDINTCON0_INT_FRAME; 271 272 writel(val, ctx->regs + VIDINTCON0); 273 } 274 } 275 276 static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win, 277 struct drm_framebuffer *fb) 278 { 279 unsigned long val; 280 int padding; 281 282 val = readl(ctx->regs + WINCON(win)); 283 val &= ~WINCONx_BPPMODE_MASK; 284 285 switch (fb->pixel_format) { 286 case DRM_FORMAT_RGB565: 287 val |= WINCONx_BPPMODE_16BPP_565; 288 val |= WINCONx_BURSTLEN_16WORD; 289 break; 290 case DRM_FORMAT_XRGB8888: 291 val |= WINCONx_BPPMODE_24BPP_xRGB; 292 val |= WINCONx_BURSTLEN_16WORD; 293 break; 294 case DRM_FORMAT_XBGR8888: 295 val |= WINCONx_BPPMODE_24BPP_xBGR; 296 val |= WINCONx_BURSTLEN_16WORD; 297 break; 298 case DRM_FORMAT_RGBX8888: 299 val |= WINCONx_BPPMODE_24BPP_RGBx; 300 val |= WINCONx_BURSTLEN_16WORD; 301 break; 302 case DRM_FORMAT_BGRX8888: 303 val |= WINCONx_BPPMODE_24BPP_BGRx; 304 val |= WINCONx_BURSTLEN_16WORD; 305 break; 306 case DRM_FORMAT_ARGB8888: 307 val |= WINCONx_BPPMODE_32BPP_ARGB | WINCONx_BLD_PIX | 308 WINCONx_ALPHA_SEL; 309 val |= WINCONx_BURSTLEN_16WORD; 310 break; 311 case DRM_FORMAT_ABGR8888: 312 val |= WINCONx_BPPMODE_32BPP_ABGR | WINCONx_BLD_PIX | 313 WINCONx_ALPHA_SEL; 314 val |= WINCONx_BURSTLEN_16WORD; 315 break; 316 case DRM_FORMAT_RGBA8888: 317 val |= WINCONx_BPPMODE_32BPP_RGBA | WINCONx_BLD_PIX | 318 WINCONx_ALPHA_SEL; 319 val |= WINCONx_BURSTLEN_16WORD; 320 break; 321 case DRM_FORMAT_BGRA8888: 322 val |= WINCONx_BPPMODE_32BPP_BGRA | WINCONx_BLD_PIX | 323 WINCONx_ALPHA_SEL; 324 val |= WINCONx_BURSTLEN_16WORD; 325 break; 326 default: 327 DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n"); 328 329 val |= WINCONx_BPPMODE_24BPP_xRGB; 330 val |= WINCONx_BURSTLEN_16WORD; 331 break; 332 } 333 334 DRM_DEBUG_KMS("bpp = %d\n", fb->bits_per_pixel); 335 336 /* 337 * In case of exynos, setting dma-burst to 16Word causes permanent 338 * tearing for very small buffers, e.g. cursor buffer. Burst Mode 339 * switching which is based on plane size is not recommended as 340 * plane size varies a lot towards the end of the screen and rapid 341 * movement causes unstable DMA which results into iommu crash/tear. 342 */ 343 344 padding = (fb->pitches[0] / (fb->bits_per_pixel >> 3)) - fb->width; 345 if (fb->width + padding < MIN_FB_WIDTH_FOR_16WORD_BURST) { 346 val &= ~WINCONx_BURSTLEN_MASK; 347 val |= WINCONx_BURSTLEN_8WORD; 348 } 349 350 writel(val, ctx->regs + WINCON(win)); 351 } 352 353 static void decon_win_set_colkey(struct decon_context *ctx, unsigned int win) 354 { 355 unsigned int keycon0 = 0, keycon1 = 0; 356 357 keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F | 358 WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0); 359 360 keycon1 = WxKEYCON1_COLVAL(0xffffffff); 361 362 writel(keycon0, ctx->regs + WKEYCON0_BASE(win)); 363 writel(keycon1, ctx->regs + WKEYCON1_BASE(win)); 364 } 365 366 /** 367 * shadow_protect_win() - disable updating values from shadow registers at vsync 368 * 369 * @win: window to protect registers for 370 * @protect: 1 to protect (disable updates) 371 */ 372 static void decon_shadow_protect_win(struct decon_context *ctx, 373 unsigned int win, bool protect) 374 { 375 u32 bits, val; 376 377 bits = SHADOWCON_WINx_PROTECT(win); 378 379 val = readl(ctx->regs + SHADOWCON); 380 if (protect) 381 val |= bits; 382 else 383 val &= ~bits; 384 writel(val, ctx->regs + SHADOWCON); 385 } 386 387 static void decon_atomic_begin(struct exynos_drm_crtc *crtc, 388 struct exynos_drm_plane *plane) 389 { 390 struct decon_context *ctx = crtc->ctx; 391 392 if (ctx->suspended) 393 return; 394 395 decon_shadow_protect_win(ctx, plane->zpos, true); 396 } 397 398 static void decon_update_plane(struct exynos_drm_crtc *crtc, 399 struct exynos_drm_plane *plane) 400 { 401 struct decon_context *ctx = crtc->ctx; 402 struct drm_display_mode *mode = &crtc->base.state->adjusted_mode; 403 struct drm_plane_state *state = plane->base.state; 404 int padding; 405 unsigned long val, alpha; 406 unsigned int last_x; 407 unsigned int last_y; 408 unsigned int win = plane->zpos; 409 unsigned int bpp = state->fb->bits_per_pixel >> 3; 410 unsigned int pitch = state->fb->pitches[0]; 411 412 if (ctx->suspended) 413 return; 414 415 /* 416 * SHADOWCON/PRTCON register is used for enabling timing. 417 * 418 * for example, once only width value of a register is set, 419 * if the dma is started then decon hardware could malfunction so 420 * with protect window setting, the register fields with prefix '_F' 421 * wouldn't be updated at vsync also but updated once unprotect window 422 * is set. 423 */ 424 425 /* buffer start address */ 426 val = (unsigned long)plane->dma_addr[0]; 427 writel(val, ctx->regs + VIDW_BUF_START(win)); 428 429 padding = (pitch / bpp) - state->fb->width; 430 431 /* buffer size */ 432 writel(state->fb->width + padding, ctx->regs + VIDW_WHOLE_X(win)); 433 writel(state->fb->height, ctx->regs + VIDW_WHOLE_Y(win)); 434 435 /* offset from the start of the buffer to read */ 436 writel(plane->src_x, ctx->regs + VIDW_OFFSET_X(win)); 437 writel(plane->src_y, ctx->regs + VIDW_OFFSET_Y(win)); 438 439 DRM_DEBUG_KMS("start addr = 0x%lx\n", 440 (unsigned long)val); 441 DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", 442 plane->crtc_w, plane->crtc_h); 443 444 /* 445 * OSD position. 446 * In case the window layout goes of LCD layout, DECON fails. 447 */ 448 if ((plane->crtc_x + plane->crtc_w) > mode->hdisplay) 449 plane->crtc_x = mode->hdisplay - plane->crtc_w; 450 if ((plane->crtc_y + plane->crtc_h) > mode->vdisplay) 451 plane->crtc_y = mode->vdisplay - plane->crtc_h; 452 453 val = VIDOSDxA_TOPLEFT_X(plane->crtc_x) | 454 VIDOSDxA_TOPLEFT_Y(plane->crtc_y); 455 writel(val, ctx->regs + VIDOSD_A(win)); 456 457 last_x = plane->crtc_x + plane->crtc_w; 458 if (last_x) 459 last_x--; 460 last_y = plane->crtc_y + plane->crtc_h; 461 if (last_y) 462 last_y--; 463 464 val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y); 465 466 writel(val, ctx->regs + VIDOSD_B(win)); 467 468 DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n", 469 plane->crtc_x, plane->crtc_y, last_x, last_y); 470 471 /* OSD alpha */ 472 alpha = VIDOSDxC_ALPHA0_R_F(0x0) | 473 VIDOSDxC_ALPHA0_G_F(0x0) | 474 VIDOSDxC_ALPHA0_B_F(0x0); 475 476 writel(alpha, ctx->regs + VIDOSD_C(win)); 477 478 alpha = VIDOSDxD_ALPHA1_R_F(0xff) | 479 VIDOSDxD_ALPHA1_G_F(0xff) | 480 VIDOSDxD_ALPHA1_B_F(0xff); 481 482 writel(alpha, ctx->regs + VIDOSD_D(win)); 483 484 decon_win_set_pixfmt(ctx, win, state->fb); 485 486 /* hardware window 0 doesn't support color key. */ 487 if (win != 0) 488 decon_win_set_colkey(ctx, win); 489 490 /* wincon */ 491 val = readl(ctx->regs + WINCON(win)); 492 val |= WINCONx_TRIPLE_BUF_MODE; 493 val |= WINCONx_ENWIN; 494 writel(val, ctx->regs + WINCON(win)); 495 496 /* Enable DMA channel and unprotect windows */ 497 decon_shadow_protect_win(ctx, win, false); 498 499 val = readl(ctx->regs + DECON_UPDATE); 500 val |= DECON_UPDATE_STANDALONE_F; 501 writel(val, ctx->regs + DECON_UPDATE); 502 } 503 504 static void decon_disable_plane(struct exynos_drm_crtc *crtc, 505 struct exynos_drm_plane *plane) 506 { 507 struct decon_context *ctx = crtc->ctx; 508 unsigned int win = plane->zpos; 509 u32 val; 510 511 if (ctx->suspended) 512 return; 513 514 /* protect windows */ 515 decon_shadow_protect_win(ctx, win, true); 516 517 /* wincon */ 518 val = readl(ctx->regs + WINCON(win)); 519 val &= ~WINCONx_ENWIN; 520 writel(val, ctx->regs + WINCON(win)); 521 522 val = readl(ctx->regs + DECON_UPDATE); 523 val |= DECON_UPDATE_STANDALONE_F; 524 writel(val, ctx->regs + DECON_UPDATE); 525 } 526 527 static void decon_atomic_flush(struct exynos_drm_crtc *crtc, 528 struct exynos_drm_plane *plane) 529 { 530 struct decon_context *ctx = crtc->ctx; 531 532 if (ctx->suspended) 533 return; 534 535 decon_shadow_protect_win(ctx, plane->zpos, false); 536 } 537 538 static void decon_init(struct decon_context *ctx) 539 { 540 u32 val; 541 542 writel(VIDCON0_SWRESET, ctx->regs + VIDCON0); 543 544 val = VIDOUTCON0_DISP_IF_0_ON; 545 if (!ctx->i80_if) 546 val |= VIDOUTCON0_RGBIF; 547 writel(val, ctx->regs + VIDOUTCON0); 548 549 writel(VCLKCON0_CLKVALUP | VCLKCON0_VCLKFREE, ctx->regs + VCLKCON0); 550 551 if (!ctx->i80_if) 552 writel(VIDCON1_VCLK_HOLD, ctx->regs + VIDCON1(0)); 553 } 554 555 static void decon_enable(struct exynos_drm_crtc *crtc) 556 { 557 struct decon_context *ctx = crtc->ctx; 558 int ret; 559 560 if (!ctx->suspended) 561 return; 562 563 ctx->suspended = false; 564 565 pm_runtime_get_sync(ctx->dev); 566 567 ret = clk_prepare_enable(ctx->pclk); 568 if (ret < 0) { 569 DRM_ERROR("Failed to prepare_enable the pclk [%d]\n", ret); 570 return; 571 } 572 573 ret = clk_prepare_enable(ctx->aclk); 574 if (ret < 0) { 575 DRM_ERROR("Failed to prepare_enable the aclk [%d]\n", ret); 576 return; 577 } 578 579 ret = clk_prepare_enable(ctx->eclk); 580 if (ret < 0) { 581 DRM_ERROR("Failed to prepare_enable the eclk [%d]\n", ret); 582 return; 583 } 584 585 ret = clk_prepare_enable(ctx->vclk); 586 if (ret < 0) { 587 DRM_ERROR("Failed to prepare_enable the vclk [%d]\n", ret); 588 return; 589 } 590 591 decon_init(ctx); 592 593 /* if vblank was enabled status, enable it again. */ 594 if (test_and_clear_bit(0, &ctx->irq_flags)) 595 decon_enable_vblank(ctx->crtc); 596 597 decon_commit(ctx->crtc); 598 } 599 600 static void decon_disable(struct exynos_drm_crtc *crtc) 601 { 602 struct decon_context *ctx = crtc->ctx; 603 int i; 604 605 if (ctx->suspended) 606 return; 607 608 /* 609 * We need to make sure that all windows are disabled before we 610 * suspend that connector. Otherwise we might try to scan from 611 * a destroyed buffer later. 612 */ 613 for (i = 0; i < WINDOWS_NR; i++) 614 decon_disable_plane(crtc, &ctx->planes[i]); 615 616 clk_disable_unprepare(ctx->vclk); 617 clk_disable_unprepare(ctx->eclk); 618 clk_disable_unprepare(ctx->aclk); 619 clk_disable_unprepare(ctx->pclk); 620 621 pm_runtime_put_sync(ctx->dev); 622 623 ctx->suspended = true; 624 } 625 626 static const struct exynos_drm_crtc_ops decon_crtc_ops = { 627 .enable = decon_enable, 628 .disable = decon_disable, 629 .commit = decon_commit, 630 .enable_vblank = decon_enable_vblank, 631 .disable_vblank = decon_disable_vblank, 632 .wait_for_vblank = decon_wait_for_vblank, 633 .atomic_begin = decon_atomic_begin, 634 .update_plane = decon_update_plane, 635 .disable_plane = decon_disable_plane, 636 .atomic_flush = decon_atomic_flush, 637 }; 638 639 640 static irqreturn_t decon_irq_handler(int irq, void *dev_id) 641 { 642 struct decon_context *ctx = (struct decon_context *)dev_id; 643 u32 val, clear_bit; 644 int win; 645 646 val = readl(ctx->regs + VIDINTCON1); 647 648 clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME; 649 if (val & clear_bit) 650 writel(clear_bit, ctx->regs + VIDINTCON1); 651 652 /* check the crtc is detached already from encoder */ 653 if (ctx->pipe < 0 || !ctx->drm_dev) 654 goto out; 655 656 if (!ctx->i80_if) { 657 drm_crtc_handle_vblank(&ctx->crtc->base); 658 for (win = 0 ; win < WINDOWS_NR ; win++) { 659 struct exynos_drm_plane *plane = &ctx->planes[win]; 660 661 if (!plane->pending_fb) 662 continue; 663 664 exynos_drm_crtc_finish_update(ctx->crtc, plane); 665 } 666 667 /* set wait vsync event to zero and wake up queue. */ 668 if (atomic_read(&ctx->wait_vsync_event)) { 669 atomic_set(&ctx->wait_vsync_event, 0); 670 wake_up(&ctx->wait_vsync_queue); 671 } 672 } 673 out: 674 return IRQ_HANDLED; 675 } 676 677 static int decon_bind(struct device *dev, struct device *master, void *data) 678 { 679 struct decon_context *ctx = dev_get_drvdata(dev); 680 struct drm_device *drm_dev = data; 681 struct exynos_drm_plane *exynos_plane; 682 enum drm_plane_type type; 683 unsigned int zpos; 684 int ret; 685 686 ret = decon_ctx_initialize(ctx, drm_dev); 687 if (ret) { 688 DRM_ERROR("decon_ctx_initialize failed.\n"); 689 return ret; 690 } 691 692 for (zpos = 0; zpos < WINDOWS_NR; zpos++) { 693 type = (zpos == ctx->default_win) ? DRM_PLANE_TYPE_PRIMARY : 694 DRM_PLANE_TYPE_OVERLAY; 695 ret = exynos_plane_init(drm_dev, &ctx->planes[zpos], 696 1 << ctx->pipe, type, decon_formats, 697 ARRAY_SIZE(decon_formats), zpos); 698 if (ret) 699 return ret; 700 } 701 702 exynos_plane = &ctx->planes[ctx->default_win]; 703 ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base, 704 ctx->pipe, EXYNOS_DISPLAY_TYPE_LCD, 705 &decon_crtc_ops, ctx); 706 if (IS_ERR(ctx->crtc)) { 707 decon_ctx_remove(ctx); 708 return PTR_ERR(ctx->crtc); 709 } 710 711 if (ctx->encoder) 712 exynos_dpi_bind(drm_dev, ctx->encoder); 713 714 return 0; 715 716 } 717 718 static void decon_unbind(struct device *dev, struct device *master, 719 void *data) 720 { 721 struct decon_context *ctx = dev_get_drvdata(dev); 722 723 decon_disable(ctx->crtc); 724 725 if (ctx->encoder) 726 exynos_dpi_remove(ctx->encoder); 727 728 decon_ctx_remove(ctx); 729 } 730 731 static const struct component_ops decon_component_ops = { 732 .bind = decon_bind, 733 .unbind = decon_unbind, 734 }; 735 736 static int decon_probe(struct platform_device *pdev) 737 { 738 struct device *dev = &pdev->dev; 739 struct decon_context *ctx; 740 struct device_node *i80_if_timings; 741 struct resource *res; 742 int ret; 743 744 if (!dev->of_node) 745 return -ENODEV; 746 747 ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); 748 if (!ctx) 749 return -ENOMEM; 750 751 ctx->dev = dev; 752 ctx->suspended = true; 753 754 i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings"); 755 if (i80_if_timings) 756 ctx->i80_if = true; 757 of_node_put(i80_if_timings); 758 759 ctx->regs = of_iomap(dev->of_node, 0); 760 if (!ctx->regs) 761 return -ENOMEM; 762 763 ctx->pclk = devm_clk_get(dev, "pclk_decon0"); 764 if (IS_ERR(ctx->pclk)) { 765 dev_err(dev, "failed to get bus clock pclk\n"); 766 ret = PTR_ERR(ctx->pclk); 767 goto err_iounmap; 768 } 769 770 ctx->aclk = devm_clk_get(dev, "aclk_decon0"); 771 if (IS_ERR(ctx->aclk)) { 772 dev_err(dev, "failed to get bus clock aclk\n"); 773 ret = PTR_ERR(ctx->aclk); 774 goto err_iounmap; 775 } 776 777 ctx->eclk = devm_clk_get(dev, "decon0_eclk"); 778 if (IS_ERR(ctx->eclk)) { 779 dev_err(dev, "failed to get eclock\n"); 780 ret = PTR_ERR(ctx->eclk); 781 goto err_iounmap; 782 } 783 784 ctx->vclk = devm_clk_get(dev, "decon0_vclk"); 785 if (IS_ERR(ctx->vclk)) { 786 dev_err(dev, "failed to get vclock\n"); 787 ret = PTR_ERR(ctx->vclk); 788 goto err_iounmap; 789 } 790 791 res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, 792 ctx->i80_if ? "lcd_sys" : "vsync"); 793 if (!res) { 794 dev_err(dev, "irq request failed.\n"); 795 ret = -ENXIO; 796 goto err_iounmap; 797 } 798 799 ret = devm_request_irq(dev, res->start, decon_irq_handler, 800 0, "drm_decon", ctx); 801 if (ret) { 802 dev_err(dev, "irq request failed.\n"); 803 goto err_iounmap; 804 } 805 806 init_waitqueue_head(&ctx->wait_vsync_queue); 807 atomic_set(&ctx->wait_vsync_event, 0); 808 809 platform_set_drvdata(pdev, ctx); 810 811 ctx->encoder = exynos_dpi_probe(dev); 812 if (IS_ERR(ctx->encoder)) { 813 ret = PTR_ERR(ctx->encoder); 814 goto err_iounmap; 815 } 816 817 pm_runtime_enable(dev); 818 819 ret = component_add(dev, &decon_component_ops); 820 if (ret) 821 goto err_disable_pm_runtime; 822 823 return ret; 824 825 err_disable_pm_runtime: 826 pm_runtime_disable(dev); 827 828 err_iounmap: 829 iounmap(ctx->regs); 830 831 return ret; 832 } 833 834 static int decon_remove(struct platform_device *pdev) 835 { 836 struct decon_context *ctx = dev_get_drvdata(&pdev->dev); 837 838 pm_runtime_disable(&pdev->dev); 839 840 iounmap(ctx->regs); 841 842 component_del(&pdev->dev, &decon_component_ops); 843 844 return 0; 845 } 846 847 struct platform_driver decon_driver = { 848 .probe = decon_probe, 849 .remove = decon_remove, 850 .driver = { 851 .name = "exynos-decon", 852 .of_match_table = decon_driver_dt_match, 853 }, 854 }; 855