1 /* 2 * Copyright (c) 2006-2008 Intel Corporation 3 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> 4 * Copyright (c) 2008 Red Hat Inc. 5 * 6 * DRM core CRTC related functions 7 * 8 * Permission to use, copy, modify, distribute, and sell this software and its 9 * documentation for any purpose is hereby granted without fee, provided that 10 * the above copyright notice appear in all copies and that both that copyright 11 * notice and this permission notice appear in supporting documentation, and 12 * that the name of the copyright holders not be used in advertising or 13 * publicity pertaining to distribution of the software without specific, 14 * written prior permission. The copyright holders make no representations 15 * about the suitability of this software for any purpose. It is provided "as 16 * is" without express or implied warranty. 17 * 18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 24 * OF THIS SOFTWARE. 25 * 26 * Authors: 27 * Keith Packard 28 * Eric Anholt <eric@anholt.net> 29 * Dave Airlie <airlied@linux.ie> 30 * Jesse Barnes <jesse.barnes@intel.com> 31 */ 32 #include <linux/ctype.h> 33 #include <linux/list.h> 34 #include <linux/slab.h> 35 #include <linux/export.h> 36 #include <linux/dma-fence.h> 37 #include <linux/uaccess.h> 38 #include <drm/drm_blend.h> 39 #include <drm/drm_crtc.h> 40 #include <drm/drm_edid.h> 41 #include <drm/drm_fourcc.h> 42 #include <drm/drm_framebuffer.h> 43 #include <drm/drm_managed.h> 44 #include <drm/drm_modeset_lock.h> 45 #include <drm/drm_atomic.h> 46 #include <drm/drm_auth.h> 47 #include <drm/drm_debugfs_crc.h> 48 #include <drm/drm_drv.h> 49 #include <drm/drm_print.h> 50 #include <drm/drm_file.h> 51 52 #include "drm_crtc_internal.h" 53 #include "drm_internal.h" 54 55 /** 56 * DOC: overview 57 * 58 * A CRTC represents the overall display pipeline. It receives pixel data from 59 * &drm_plane and blends them together. The &drm_display_mode is also attached 60 * to the CRTC, specifying display timings. On the output side the data is fed 61 * to one or more &drm_encoder, which are then each connected to one 62 * &drm_connector. 63 * 64 * To create a CRTC, a KMS driver allocates and zeroes an instance of 65 * &struct drm_crtc (possibly as part of a larger structure) and registers it 66 * with a call to drm_crtc_init_with_planes(). 67 * 68 * The CRTC is also the entry point for legacy modeset operations (see 69 * &drm_crtc_funcs.set_config), legacy plane operations (see 70 * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2), and other legacy 71 * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these 72 * features are controlled through &drm_property and 73 * &drm_mode_config_funcs.atomic_check. 74 */ 75 76 /** 77 * drm_crtc_from_index - find the registered CRTC at an index 78 * @dev: DRM device 79 * @idx: index of registered CRTC to find for 80 * 81 * Given a CRTC index, return the registered CRTC from DRM device's 82 * list of CRTCs with matching index. This is the inverse of drm_crtc_index(). 83 * It's useful in the vblank callbacks (like &drm_driver.enable_vblank or 84 * &drm_driver.disable_vblank), since that still deals with indices instead 85 * of pointers to &struct drm_crtc." 86 */ 87 struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx) 88 { 89 struct drm_crtc *crtc; 90 91 drm_for_each_crtc(crtc, dev) 92 if (idx == crtc->index) 93 return crtc; 94 95 return NULL; 96 } 97 EXPORT_SYMBOL(drm_crtc_from_index); 98 99 int drm_crtc_force_disable(struct drm_crtc *crtc) 100 { 101 struct drm_mode_set set = { 102 .crtc = crtc, 103 }; 104 105 WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev)); 106 107 return drm_mode_set_config_internal(&set); 108 } 109 110 int drm_crtc_register_all(struct drm_device *dev) 111 { 112 struct drm_crtc *crtc; 113 int ret = 0; 114 115 drm_for_each_crtc(crtc, dev) { 116 drm_debugfs_crtc_add(crtc); 117 118 if (crtc->funcs->late_register) 119 ret = crtc->funcs->late_register(crtc); 120 if (ret) 121 return ret; 122 } 123 124 return 0; 125 } 126 127 void drm_crtc_unregister_all(struct drm_device *dev) 128 { 129 struct drm_crtc *crtc; 130 131 drm_for_each_crtc(crtc, dev) { 132 if (crtc->funcs->early_unregister) 133 crtc->funcs->early_unregister(crtc); 134 drm_debugfs_crtc_remove(crtc); 135 } 136 } 137 138 static int drm_crtc_crc_init(struct drm_crtc *crtc) 139 { 140 #ifdef CONFIG_DEBUG_FS 141 spin_lock_init(&crtc->crc.lock); 142 init_waitqueue_head(&crtc->crc.wq); 143 crtc->crc.source = kstrdup("auto", GFP_KERNEL); 144 if (!crtc->crc.source) 145 return -ENOMEM; 146 #endif 147 return 0; 148 } 149 150 static void drm_crtc_crc_fini(struct drm_crtc *crtc) 151 { 152 #ifdef CONFIG_DEBUG_FS 153 kfree(crtc->crc.source); 154 #endif 155 } 156 157 static const struct dma_fence_ops drm_crtc_fence_ops; 158 159 static struct drm_crtc *fence_to_crtc(struct dma_fence *fence) 160 { 161 BUG_ON(fence->ops != &drm_crtc_fence_ops); 162 return container_of(fence->lock, struct drm_crtc, fence_lock); 163 } 164 165 static const char *drm_crtc_fence_get_driver_name(struct dma_fence *fence) 166 { 167 struct drm_crtc *crtc = fence_to_crtc(fence); 168 169 return crtc->dev->driver->name; 170 } 171 172 static const char *drm_crtc_fence_get_timeline_name(struct dma_fence *fence) 173 { 174 struct drm_crtc *crtc = fence_to_crtc(fence); 175 176 return crtc->timeline_name; 177 } 178 179 static const struct dma_fence_ops drm_crtc_fence_ops = { 180 .get_driver_name = drm_crtc_fence_get_driver_name, 181 .get_timeline_name = drm_crtc_fence_get_timeline_name, 182 }; 183 184 struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc) 185 { 186 struct dma_fence *fence; 187 188 fence = kzalloc(sizeof(*fence), GFP_KERNEL); 189 if (!fence) 190 return NULL; 191 192 dma_fence_init(fence, &drm_crtc_fence_ops, &crtc->fence_lock, 193 crtc->fence_context, ++crtc->fence_seqno); 194 195 return fence; 196 } 197 198 /** 199 * DOC: standard CRTC properties 200 * 201 * DRM CRTCs have a few standardized properties: 202 * 203 * ACTIVE: 204 * Atomic property for setting the power state of the CRTC. When set to 1 205 * the CRTC will actively display content. When set to 0 the CRTC will be 206 * powered off. There is no expectation that user-space will reset CRTC 207 * resources like the mode and planes when setting ACTIVE to 0. 208 * 209 * User-space can rely on an ACTIVE change to 1 to never fail an atomic 210 * test as long as no other property has changed. If a change to ACTIVE 211 * fails an atomic test, this is a driver bug. For this reason setting 212 * ACTIVE to 0 must not release internal resources (like reserved memory 213 * bandwidth or clock generators). 214 * 215 * Note that the legacy DPMS property on connectors is internally routed 216 * to control this property for atomic drivers. 217 * MODE_ID: 218 * Atomic property for setting the CRTC display timings. The value is the 219 * ID of a blob containing the DRM mode info. To disable the CRTC, 220 * user-space must set this property to 0. 221 * 222 * Setting MODE_ID to 0 will release reserved resources for the CRTC. 223 * SCALING_FILTER: 224 * Atomic property for setting the scaling filter for CRTC scaler 225 * 226 * The value of this property can be one of the following: 227 * 228 * Default: 229 * Driver's default scaling filter 230 * Nearest Neighbor: 231 * Nearest Neighbor scaling filter 232 */ 233 234 __printf(6, 0) 235 static int __drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, 236 struct drm_plane *primary, 237 struct drm_plane *cursor, 238 const struct drm_crtc_funcs *funcs, 239 const char *name, va_list ap) 240 { 241 struct drm_mode_config *config = &dev->mode_config; 242 int ret; 243 244 WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY); 245 WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR); 246 247 /* crtc index is used with 32bit bitmasks */ 248 if (WARN_ON(config->num_crtc >= 32)) 249 return -EINVAL; 250 251 WARN_ON(drm_drv_uses_atomic_modeset(dev) && 252 (!funcs->atomic_destroy_state || 253 !funcs->atomic_duplicate_state)); 254 255 crtc->dev = dev; 256 crtc->funcs = funcs; 257 258 INIT_LIST_HEAD(&crtc->commit_list); 259 spin_lock_init(&crtc->commit_lock); 260 261 drm_modeset_lock_init(&crtc->mutex); 262 ret = drm_mode_object_add(dev, &crtc->base, DRM_MODE_OBJECT_CRTC); 263 if (ret) 264 return ret; 265 266 if (name) { 267 crtc->name = kvasprintf(GFP_KERNEL, name, ap); 268 } else { 269 crtc->name = kasprintf(GFP_KERNEL, "crtc-%d", config->num_crtc); 270 } 271 if (!crtc->name) { 272 drm_mode_object_unregister(dev, &crtc->base); 273 return -ENOMEM; 274 } 275 276 crtc->fence_context = dma_fence_context_alloc(1); 277 spin_lock_init(&crtc->fence_lock); 278 snprintf(crtc->timeline_name, sizeof(crtc->timeline_name), 279 "CRTC:%d-%s", crtc->base.id, crtc->name); 280 281 crtc->base.properties = &crtc->properties; 282 283 list_add_tail(&crtc->head, &config->crtc_list); 284 crtc->index = config->num_crtc++; 285 286 crtc->primary = primary; 287 crtc->cursor = cursor; 288 if (primary && !primary->possible_crtcs) 289 primary->possible_crtcs = drm_crtc_mask(crtc); 290 if (cursor && !cursor->possible_crtcs) 291 cursor->possible_crtcs = drm_crtc_mask(crtc); 292 293 ret = drm_crtc_crc_init(crtc); 294 if (ret) { 295 drm_mode_object_unregister(dev, &crtc->base); 296 return ret; 297 } 298 299 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { 300 drm_object_attach_property(&crtc->base, config->prop_active, 0); 301 drm_object_attach_property(&crtc->base, config->prop_mode_id, 0); 302 drm_object_attach_property(&crtc->base, 303 config->prop_out_fence_ptr, 0); 304 drm_object_attach_property(&crtc->base, 305 config->prop_vrr_enabled, 0); 306 } 307 308 return 0; 309 } 310 311 /** 312 * drm_crtc_init_with_planes - Initialise a new CRTC object with 313 * specified primary and cursor planes. 314 * @dev: DRM device 315 * @crtc: CRTC object to init 316 * @primary: Primary plane for CRTC 317 * @cursor: Cursor plane for CRTC 318 * @funcs: callbacks for the new CRTC 319 * @name: printf style format string for the CRTC name, or NULL for default name 320 * 321 * Inits a new object created as base part of a driver crtc object. Drivers 322 * should use this function instead of drm_crtc_init(), which is only provided 323 * for backwards compatibility with drivers which do not yet support universal 324 * planes). For really simple hardware which has only 1 plane look at 325 * drm_simple_display_pipe_init() instead. 326 * The &drm_crtc_funcs.destroy hook should call drm_crtc_cleanup() and kfree() 327 * the crtc structure. The crtc structure should not be allocated with 328 * devm_kzalloc(). 329 * 330 * The @primary and @cursor planes are only relevant for legacy uAPI, see 331 * &drm_crtc.primary and &drm_crtc.cursor. 332 * 333 * Note: consider using drmm_crtc_alloc_with_planes() or 334 * drmm_crtc_init_with_planes() instead of drm_crtc_init_with_planes() 335 * to let the DRM managed resource infrastructure take care of cleanup 336 * and deallocation. 337 * 338 * Returns: 339 * Zero on success, error code on failure. 340 */ 341 int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, 342 struct drm_plane *primary, 343 struct drm_plane *cursor, 344 const struct drm_crtc_funcs *funcs, 345 const char *name, ...) 346 { 347 va_list ap; 348 int ret; 349 350 WARN_ON(!funcs->destroy); 351 352 va_start(ap, name); 353 ret = __drm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs, 354 name, ap); 355 va_end(ap); 356 357 return ret; 358 } 359 EXPORT_SYMBOL(drm_crtc_init_with_planes); 360 361 static void drmm_crtc_init_with_planes_cleanup(struct drm_device *dev, 362 void *ptr) 363 { 364 struct drm_crtc *crtc = ptr; 365 366 drm_crtc_cleanup(crtc); 367 } 368 369 __printf(6, 0) 370 static int __drmm_crtc_init_with_planes(struct drm_device *dev, 371 struct drm_crtc *crtc, 372 struct drm_plane *primary, 373 struct drm_plane *cursor, 374 const struct drm_crtc_funcs *funcs, 375 const char *name, 376 va_list args) 377 { 378 int ret; 379 380 drm_WARN_ON(dev, funcs && funcs->destroy); 381 382 ret = __drm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs, 383 name, args); 384 if (ret) 385 return ret; 386 387 ret = drmm_add_action_or_reset(dev, drmm_crtc_init_with_planes_cleanup, 388 crtc); 389 if (ret) 390 return ret; 391 392 return 0; 393 } 394 395 /** 396 * drmm_crtc_init_with_planes - Initialise a new CRTC object with 397 * specified primary and cursor planes. 398 * @dev: DRM device 399 * @crtc: CRTC object to init 400 * @primary: Primary plane for CRTC 401 * @cursor: Cursor plane for CRTC 402 * @funcs: callbacks for the new CRTC 403 * @name: printf style format string for the CRTC name, or NULL for default name 404 * 405 * Inits a new object created as base part of a driver crtc object. Drivers 406 * should use this function instead of drm_crtc_init(), which is only provided 407 * for backwards compatibility with drivers which do not yet support universal 408 * planes). For really simple hardware which has only 1 plane look at 409 * drm_simple_display_pipe_init() instead. 410 * 411 * Cleanup is automatically handled through registering 412 * drmm_crtc_cleanup() with drmm_add_action(). The crtc structure should 413 * be allocated with drmm_kzalloc(). 414 * 415 * The @drm_crtc_funcs.destroy hook must be NULL. 416 * 417 * The @primary and @cursor planes are only relevant for legacy uAPI, see 418 * &drm_crtc.primary and &drm_crtc.cursor. 419 * 420 * Returns: 421 * Zero on success, error code on failure. 422 */ 423 int drmm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, 424 struct drm_plane *primary, 425 struct drm_plane *cursor, 426 const struct drm_crtc_funcs *funcs, 427 const char *name, ...) 428 { 429 va_list ap; 430 int ret; 431 432 va_start(ap, name); 433 ret = __drmm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs, 434 name, ap); 435 va_end(ap); 436 if (ret) 437 return ret; 438 439 return 0; 440 } 441 EXPORT_SYMBOL(drmm_crtc_init_with_planes); 442 443 void *__drmm_crtc_alloc_with_planes(struct drm_device *dev, 444 size_t size, size_t offset, 445 struct drm_plane *primary, 446 struct drm_plane *cursor, 447 const struct drm_crtc_funcs *funcs, 448 const char *name, ...) 449 { 450 void *container; 451 struct drm_crtc *crtc; 452 va_list ap; 453 int ret; 454 455 if (WARN_ON(!funcs || funcs->destroy)) 456 return ERR_PTR(-EINVAL); 457 458 container = drmm_kzalloc(dev, size, GFP_KERNEL); 459 if (!container) 460 return ERR_PTR(-ENOMEM); 461 462 crtc = container + offset; 463 464 va_start(ap, name); 465 ret = __drmm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs, 466 name, ap); 467 va_end(ap); 468 if (ret) 469 return ERR_PTR(ret); 470 471 return container; 472 } 473 EXPORT_SYMBOL(__drmm_crtc_alloc_with_planes); 474 475 /** 476 * drm_crtc_cleanup - Clean up the core crtc usage 477 * @crtc: CRTC to cleanup 478 * 479 * This function cleans up @crtc and removes it from the DRM mode setting 480 * core. Note that the function does *not* free the crtc structure itself, 481 * this is the responsibility of the caller. 482 */ 483 void drm_crtc_cleanup(struct drm_crtc *crtc) 484 { 485 struct drm_device *dev = crtc->dev; 486 487 /* Note that the crtc_list is considered to be static; should we 488 * remove the drm_crtc at runtime we would have to decrement all 489 * the indices on the drm_crtc after us in the crtc_list. 490 */ 491 492 drm_crtc_crc_fini(crtc); 493 494 kfree(crtc->gamma_store); 495 crtc->gamma_store = NULL; 496 497 drm_modeset_lock_fini(&crtc->mutex); 498 499 drm_mode_object_unregister(dev, &crtc->base); 500 list_del(&crtc->head); 501 dev->mode_config.num_crtc--; 502 503 WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state); 504 if (crtc->state && crtc->funcs->atomic_destroy_state) 505 crtc->funcs->atomic_destroy_state(crtc, crtc->state); 506 507 kfree(crtc->name); 508 509 memset(crtc, 0, sizeof(*crtc)); 510 } 511 EXPORT_SYMBOL(drm_crtc_cleanup); 512 513 /** 514 * drm_mode_getcrtc - get CRTC configuration 515 * @dev: drm device for the ioctl 516 * @data: data pointer for the ioctl 517 * @file_priv: drm file for the ioctl call 518 * 519 * Construct a CRTC configuration structure to return to the user. 520 * 521 * Called by the user via ioctl. 522 * 523 * Returns: 524 * Zero on success, negative errno on failure. 525 */ 526 int drm_mode_getcrtc(struct drm_device *dev, 527 void *data, struct drm_file *file_priv) 528 { 529 struct drm_mode_crtc *crtc_resp = data; 530 struct drm_crtc *crtc; 531 struct drm_plane *plane; 532 533 if (!drm_core_check_feature(dev, DRIVER_MODESET)) 534 return -EOPNOTSUPP; 535 536 crtc = drm_crtc_find(dev, file_priv, crtc_resp->crtc_id); 537 if (!crtc) 538 return -ENOENT; 539 540 plane = crtc->primary; 541 542 crtc_resp->gamma_size = crtc->gamma_size; 543 544 drm_modeset_lock(&plane->mutex, NULL); 545 if (plane->state && plane->state->fb) 546 crtc_resp->fb_id = plane->state->fb->base.id; 547 else if (!plane->state && plane->fb) 548 crtc_resp->fb_id = plane->fb->base.id; 549 else 550 crtc_resp->fb_id = 0; 551 552 if (plane->state) { 553 crtc_resp->x = plane->state->src_x >> 16; 554 crtc_resp->y = plane->state->src_y >> 16; 555 } 556 drm_modeset_unlock(&plane->mutex); 557 558 drm_modeset_lock(&crtc->mutex, NULL); 559 if (crtc->state) { 560 if (crtc->state->enable) { 561 drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode); 562 crtc_resp->mode_valid = 1; 563 } else { 564 crtc_resp->mode_valid = 0; 565 } 566 } else { 567 crtc_resp->x = crtc->x; 568 crtc_resp->y = crtc->y; 569 570 if (crtc->enabled) { 571 drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode); 572 crtc_resp->mode_valid = 1; 573 574 } else { 575 crtc_resp->mode_valid = 0; 576 } 577 } 578 if (!file_priv->aspect_ratio_allowed) 579 crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; 580 drm_modeset_unlock(&crtc->mutex); 581 582 return 0; 583 } 584 585 static int __drm_mode_set_config_internal(struct drm_mode_set *set, 586 struct drm_modeset_acquire_ctx *ctx) 587 { 588 struct drm_crtc *crtc = set->crtc; 589 struct drm_framebuffer *fb; 590 struct drm_crtc *tmp; 591 int ret; 592 593 WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev)); 594 595 /* 596 * NOTE: ->set_config can also disable other crtcs (if we steal all 597 * connectors from it), hence we need to refcount the fbs across all 598 * crtcs. Atomic modeset will have saner semantics ... 599 */ 600 drm_for_each_crtc(tmp, crtc->dev) { 601 struct drm_plane *plane = tmp->primary; 602 603 plane->old_fb = plane->fb; 604 } 605 606 fb = set->fb; 607 608 ret = crtc->funcs->set_config(set, ctx); 609 if (ret == 0) { 610 struct drm_plane *plane = crtc->primary; 611 612 plane->crtc = fb ? crtc : NULL; 613 plane->fb = fb; 614 } 615 616 drm_for_each_crtc(tmp, crtc->dev) { 617 struct drm_plane *plane = tmp->primary; 618 619 if (plane->fb) 620 drm_framebuffer_get(plane->fb); 621 if (plane->old_fb) 622 drm_framebuffer_put(plane->old_fb); 623 plane->old_fb = NULL; 624 } 625 626 return ret; 627 } 628 629 /** 630 * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config 631 * @set: modeset config to set 632 * 633 * This is a little helper to wrap internal calls to the 634 * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is 635 * correct refcounting dance. 636 * 637 * This should only be used by non-atomic legacy drivers. 638 * 639 * Returns: 640 * Zero on success, negative errno on failure. 641 */ 642 int drm_mode_set_config_internal(struct drm_mode_set *set) 643 { 644 WARN_ON(drm_drv_uses_atomic_modeset(set->crtc->dev)); 645 646 return __drm_mode_set_config_internal(set, NULL); 647 } 648 EXPORT_SYMBOL(drm_mode_set_config_internal); 649 650 /** 651 * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the 652 * CRTC viewport 653 * @crtc: CRTC that framebuffer will be displayed on 654 * @x: x panning 655 * @y: y panning 656 * @mode: mode that framebuffer will be displayed under 657 * @fb: framebuffer to check size of 658 */ 659 int drm_crtc_check_viewport(const struct drm_crtc *crtc, 660 int x, int y, 661 const struct drm_display_mode *mode, 662 const struct drm_framebuffer *fb) 663 664 { 665 int hdisplay, vdisplay; 666 667 drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay); 668 669 if (crtc->state && 670 drm_rotation_90_or_270(crtc->primary->state->rotation)) 671 swap(hdisplay, vdisplay); 672 673 return drm_framebuffer_check_src_coords(x << 16, y << 16, 674 hdisplay << 16, vdisplay << 16, 675 fb); 676 } 677 EXPORT_SYMBOL(drm_crtc_check_viewport); 678 679 /** 680 * drm_mode_setcrtc - set CRTC configuration 681 * @dev: drm device for the ioctl 682 * @data: data pointer for the ioctl 683 * @file_priv: drm file for the ioctl call 684 * 685 * Build a new CRTC configuration based on user request. 686 * 687 * Called by the user via ioctl. 688 * 689 * Returns: 690 * Zero on success, negative errno on failure. 691 */ 692 int drm_mode_setcrtc(struct drm_device *dev, void *data, 693 struct drm_file *file_priv) 694 { 695 struct drm_mode_config *config = &dev->mode_config; 696 struct drm_mode_crtc *crtc_req = data; 697 struct drm_crtc *crtc; 698 struct drm_plane *plane; 699 struct drm_connector **connector_set = NULL, *connector; 700 struct drm_framebuffer *fb = NULL; 701 struct drm_display_mode *mode = NULL; 702 struct drm_mode_set set; 703 uint32_t __user *set_connectors_ptr; 704 struct drm_modeset_acquire_ctx ctx; 705 int ret, i, num_connectors = 0; 706 707 if (!drm_core_check_feature(dev, DRIVER_MODESET)) 708 return -EOPNOTSUPP; 709 710 /* 711 * Universal plane src offsets are only 16.16, prevent havoc for 712 * drivers using universal plane code internally. 713 */ 714 if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000) 715 return -ERANGE; 716 717 crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id); 718 if (!crtc) { 719 drm_dbg_kms(dev, "Unknown CRTC ID %d\n", crtc_req->crtc_id); 720 return -ENOENT; 721 } 722 drm_dbg_kms(dev, "[CRTC:%d:%s]\n", crtc->base.id, crtc->name); 723 724 plane = crtc->primary; 725 726 /* allow disabling with the primary plane leased */ 727 if (crtc_req->mode_valid && !drm_lease_held(file_priv, plane->base.id)) 728 return -EACCES; 729 730 DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 731 DRM_MODESET_ACQUIRE_INTERRUPTIBLE, ret); 732 733 if (crtc_req->mode_valid) { 734 /* If we have a mode we need a framebuffer. */ 735 /* If we pass -1, set the mode with the currently bound fb */ 736 if (crtc_req->fb_id == -1) { 737 struct drm_framebuffer *old_fb; 738 739 if (plane->state) 740 old_fb = plane->state->fb; 741 else 742 old_fb = plane->fb; 743 744 if (!old_fb) { 745 drm_dbg_kms(dev, "CRTC doesn't have current FB\n"); 746 ret = -EINVAL; 747 goto out; 748 } 749 750 fb = old_fb; 751 /* Make refcounting symmetric with the lookup path. */ 752 drm_framebuffer_get(fb); 753 } else { 754 fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id); 755 if (!fb) { 756 drm_dbg_kms(dev, "Unknown FB ID%d\n", 757 crtc_req->fb_id); 758 ret = -ENOENT; 759 goto out; 760 } 761 } 762 763 mode = drm_mode_create(dev); 764 if (!mode) { 765 ret = -ENOMEM; 766 goto out; 767 } 768 if (!file_priv->aspect_ratio_allowed && 769 (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) { 770 drm_dbg_kms(dev, "Unexpected aspect-ratio flag bits\n"); 771 ret = -EINVAL; 772 goto out; 773 } 774 775 776 ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode); 777 if (ret) { 778 drm_dbg_kms(dev, "Invalid mode (%s, %pe): " DRM_MODE_FMT "\n", 779 drm_get_mode_status_name(mode->status), 780 ERR_PTR(ret), DRM_MODE_ARG(mode)); 781 goto out; 782 } 783 784 /* 785 * Check whether the primary plane supports the fb pixel format. 786 * Drivers not implementing the universal planes API use a 787 * default formats list provided by the DRM core which doesn't 788 * match real hardware capabilities. Skip the check in that 789 * case. 790 */ 791 if (!plane->format_default) { 792 if (!drm_plane_has_format(plane, fb->format->format, fb->modifier)) { 793 drm_dbg_kms(dev, "Invalid pixel format %p4cc, modifier 0x%llx\n", 794 &fb->format->format, fb->modifier); 795 ret = -EINVAL; 796 goto out; 797 } 798 } 799 800 ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y, 801 mode, fb); 802 if (ret) 803 goto out; 804 805 } 806 807 if (crtc_req->count_connectors == 0 && mode) { 808 drm_dbg_kms(dev, "Count connectors is 0 but mode set\n"); 809 ret = -EINVAL; 810 goto out; 811 } 812 813 if (crtc_req->count_connectors > 0 && (!mode || !fb)) { 814 drm_dbg_kms(dev, "Count connectors is %d but no mode or fb set\n", 815 crtc_req->count_connectors); 816 ret = -EINVAL; 817 goto out; 818 } 819 820 if (crtc_req->count_connectors > 0) { 821 u32 out_id; 822 823 /* Avoid unbounded kernel memory allocation */ 824 if (crtc_req->count_connectors > config->num_connector) { 825 ret = -EINVAL; 826 goto out; 827 } 828 829 connector_set = kmalloc_array(crtc_req->count_connectors, 830 sizeof(struct drm_connector *), 831 GFP_KERNEL); 832 if (!connector_set) { 833 ret = -ENOMEM; 834 goto out; 835 } 836 837 for (i = 0; i < crtc_req->count_connectors; i++) { 838 connector_set[i] = NULL; 839 set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr; 840 if (get_user(out_id, &set_connectors_ptr[i])) { 841 ret = -EFAULT; 842 goto out; 843 } 844 845 connector = drm_connector_lookup(dev, file_priv, out_id); 846 if (!connector) { 847 drm_dbg_kms(dev, "Connector id %d unknown\n", 848 out_id); 849 ret = -ENOENT; 850 goto out; 851 } 852 drm_dbg_kms(dev, "[CONNECTOR:%d:%s]\n", 853 connector->base.id, connector->name); 854 855 connector_set[i] = connector; 856 num_connectors++; 857 } 858 } 859 860 set.crtc = crtc; 861 set.x = crtc_req->x; 862 set.y = crtc_req->y; 863 set.mode = mode; 864 set.connectors = connector_set; 865 set.num_connectors = num_connectors; 866 set.fb = fb; 867 868 if (drm_drv_uses_atomic_modeset(dev)) 869 ret = crtc->funcs->set_config(&set, &ctx); 870 else 871 ret = __drm_mode_set_config_internal(&set, &ctx); 872 873 out: 874 if (fb) 875 drm_framebuffer_put(fb); 876 877 if (connector_set) { 878 for (i = 0; i < num_connectors; i++) { 879 if (connector_set[i]) 880 drm_connector_put(connector_set[i]); 881 } 882 } 883 kfree(connector_set); 884 drm_mode_destroy(dev, mode); 885 886 /* In case we need to retry... */ 887 connector_set = NULL; 888 fb = NULL; 889 mode = NULL; 890 num_connectors = 0; 891 892 DRM_MODESET_LOCK_ALL_END(dev, ctx, ret); 893 894 return ret; 895 } 896 897 int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, 898 struct drm_property *property, 899 uint64_t value) 900 { 901 int ret = -EINVAL; 902 struct drm_crtc *crtc = obj_to_crtc(obj); 903 904 if (crtc->funcs->set_property) 905 ret = crtc->funcs->set_property(crtc, property, value); 906 if (!ret) 907 drm_object_property_set_value(obj, property, value); 908 909 return ret; 910 } 911 912 /** 913 * drm_crtc_create_scaling_filter_property - create a new scaling filter 914 * property 915 * 916 * @crtc: drm CRTC 917 * @supported_filters: bitmask of supported scaling filters, must include 918 * BIT(DRM_SCALING_FILTER_DEFAULT). 919 * 920 * This function lets driver to enable the scaling filter property on a given 921 * CRTC. 922 * 923 * RETURNS: 924 * Zero for success or -errno 925 */ 926 int drm_crtc_create_scaling_filter_property(struct drm_crtc *crtc, 927 unsigned int supported_filters) 928 { 929 struct drm_property *prop = 930 drm_create_scaling_filter_prop(crtc->dev, supported_filters); 931 932 if (IS_ERR(prop)) 933 return PTR_ERR(prop); 934 935 drm_object_attach_property(&crtc->base, prop, 936 DRM_SCALING_FILTER_DEFAULT); 937 crtc->scaling_filter_property = prop; 938 939 return 0; 940 } 941 EXPORT_SYMBOL(drm_crtc_create_scaling_filter_property); 942