1 /* 2 * Copyright (c) 2016 Intel Corporation 3 * 4 * Permission to use, copy, modify, distribute, and sell this software and its 5 * documentation for any purpose is hereby granted without fee, provided that 6 * the above copyright notice appear in all copies and that both that copyright 7 * notice and this permission notice appear in supporting documentation, and 8 * that the name of the copyright holders not be used in advertising or 9 * publicity pertaining to distribution of the software without specific, 10 * written prior permission. The copyright holders make no representations 11 * about the suitability of this software for any purpose. It is provided "as 12 * is" without express or implied warranty. 13 * 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 20 * OF THIS SOFTWARE. 21 */ 22 23 #include <drm/drm_auth.h> 24 #include <drm/drm_connector.h> 25 #include <drm/drm_drv.h> 26 #include <drm/drm_edid.h> 27 #include <drm/drm_encoder.h> 28 #include <drm/drm_file.h> 29 #include <drm/drm_managed.h> 30 #include <drm/drm_panel.h> 31 #include <drm/drm_print.h> 32 #include <drm/drm_privacy_screen_consumer.h> 33 #include <drm/drm_sysfs.h> 34 #include <drm/drm_utils.h> 35 36 #include <linux/property.h> 37 #include <linux/uaccess.h> 38 39 #include <video/cmdline.h> 40 41 #include "drm_crtc_internal.h" 42 #include "drm_internal.h" 43 44 /** 45 * DOC: overview 46 * 47 * In DRM connectors are the general abstraction for display sinks, and include 48 * also fixed panels or anything else that can display pixels in some form. As 49 * opposed to all other KMS objects representing hardware (like CRTC, encoder or 50 * plane abstractions) connectors can be hotplugged and unplugged at runtime. 51 * Hence they are reference-counted using drm_connector_get() and 52 * drm_connector_put(). 53 * 54 * KMS driver must create, initialize, register and attach at a &struct 55 * drm_connector for each such sink. The instance is created as other KMS 56 * objects and initialized by setting the following fields. The connector is 57 * initialized with a call to drm_connector_init() with a pointer to the 58 * &struct drm_connector_funcs and a connector type, and then exposed to 59 * userspace with a call to drm_connector_register(). 60 * 61 * Connectors must be attached to an encoder to be used. For devices that map 62 * connectors to encoders 1:1, the connector should be attached at 63 * initialization time with a call to drm_connector_attach_encoder(). The 64 * driver must also set the &drm_connector.encoder field to point to the 65 * attached encoder. 66 * 67 * For connectors which are not fixed (like built-in panels) the driver needs to 68 * support hotplug notifications. The simplest way to do that is by using the 69 * probe helpers, see drm_kms_helper_poll_init() for connectors which don't have 70 * hardware support for hotplug interrupts. Connectors with hardware hotplug 71 * support can instead use e.g. drm_helper_hpd_irq_event(). 72 */ 73 74 /* 75 * Global connector list for drm_connector_find_by_fwnode(). 76 * Note drm_connector_[un]register() first take connector->lock and then 77 * take the connector_list_lock. 78 */ 79 static DEFINE_MUTEX(connector_list_lock); 80 static LIST_HEAD(connector_list); 81 82 struct drm_conn_prop_enum_list { 83 int type; 84 const char *name; 85 struct ida ida; 86 }; 87 88 /* 89 * Connector and encoder types. 90 */ 91 static struct drm_conn_prop_enum_list drm_connector_enum_list[] = { 92 { DRM_MODE_CONNECTOR_Unknown, "Unknown" }, 93 { DRM_MODE_CONNECTOR_VGA, "VGA" }, 94 { DRM_MODE_CONNECTOR_DVII, "DVI-I" }, 95 { DRM_MODE_CONNECTOR_DVID, "DVI-D" }, 96 { DRM_MODE_CONNECTOR_DVIA, "DVI-A" }, 97 { DRM_MODE_CONNECTOR_Composite, "Composite" }, 98 { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" }, 99 { DRM_MODE_CONNECTOR_LVDS, "LVDS" }, 100 { DRM_MODE_CONNECTOR_Component, "Component" }, 101 { DRM_MODE_CONNECTOR_9PinDIN, "DIN" }, 102 { DRM_MODE_CONNECTOR_DisplayPort, "DP" }, 103 { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" }, 104 { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" }, 105 { DRM_MODE_CONNECTOR_TV, "TV" }, 106 { DRM_MODE_CONNECTOR_eDP, "eDP" }, 107 { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" }, 108 { DRM_MODE_CONNECTOR_DSI, "DSI" }, 109 { DRM_MODE_CONNECTOR_DPI, "DPI" }, 110 { DRM_MODE_CONNECTOR_WRITEBACK, "Writeback" }, 111 { DRM_MODE_CONNECTOR_SPI, "SPI" }, 112 { DRM_MODE_CONNECTOR_USB, "USB" }, 113 }; 114 115 void drm_connector_ida_init(void) 116 { 117 int i; 118 119 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++) 120 ida_init(&drm_connector_enum_list[i].ida); 121 } 122 123 void drm_connector_ida_destroy(void) 124 { 125 int i; 126 127 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++) 128 ida_destroy(&drm_connector_enum_list[i].ida); 129 } 130 131 /** 132 * drm_get_connector_type_name - return a string for connector type 133 * @type: The connector type (DRM_MODE_CONNECTOR_*) 134 * 135 * Returns: the name of the connector type, or NULL if the type is not valid. 136 */ 137 const char *drm_get_connector_type_name(unsigned int type) 138 { 139 if (type < ARRAY_SIZE(drm_connector_enum_list)) 140 return drm_connector_enum_list[type].name; 141 142 return NULL; 143 } 144 EXPORT_SYMBOL(drm_get_connector_type_name); 145 146 /** 147 * drm_connector_get_cmdline_mode - reads the user's cmdline mode 148 * @connector: connector to query 149 * 150 * The kernel supports per-connector configuration of its consoles through 151 * use of the video= parameter. This function parses that option and 152 * extracts the user's specified mode (or enable/disable status) for a 153 * particular connector. This is typically only used during the early fbdev 154 * setup. 155 */ 156 static void drm_connector_get_cmdline_mode(struct drm_connector *connector) 157 { 158 struct drm_cmdline_mode *mode = &connector->cmdline_mode; 159 const char *option; 160 161 option = video_get_options(connector->name); 162 if (!option) 163 return; 164 165 if (!drm_mode_parse_command_line_for_connector(option, 166 connector, 167 mode)) 168 return; 169 170 if (mode->force) { 171 DRM_INFO("forcing %s connector %s\n", connector->name, 172 drm_get_connector_force_name(mode->force)); 173 connector->force = mode->force; 174 } 175 176 if (mode->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) { 177 DRM_INFO("cmdline forces connector %s panel_orientation to %d\n", 178 connector->name, mode->panel_orientation); 179 drm_connector_set_panel_orientation(connector, 180 mode->panel_orientation); 181 } 182 183 DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n", 184 connector->name, mode->name, 185 mode->xres, mode->yres, 186 mode->refresh_specified ? mode->refresh : 60, 187 mode->rb ? " reduced blanking" : "", 188 mode->margins ? " with margins" : "", 189 mode->interlace ? " interlaced" : ""); 190 } 191 192 static void drm_connector_free(struct kref *kref) 193 { 194 struct drm_connector *connector = 195 container_of(kref, struct drm_connector, base.refcount); 196 struct drm_device *dev = connector->dev; 197 198 drm_mode_object_unregister(dev, &connector->base); 199 connector->funcs->destroy(connector); 200 } 201 202 void drm_connector_free_work_fn(struct work_struct *work) 203 { 204 struct drm_connector *connector, *n; 205 struct drm_device *dev = 206 container_of(work, struct drm_device, mode_config.connector_free_work); 207 struct drm_mode_config *config = &dev->mode_config; 208 unsigned long flags; 209 struct llist_node *freed; 210 211 spin_lock_irqsave(&config->connector_list_lock, flags); 212 freed = llist_del_all(&config->connector_free_list); 213 spin_unlock_irqrestore(&config->connector_list_lock, flags); 214 215 llist_for_each_entry_safe(connector, n, freed, free_node) { 216 drm_mode_object_unregister(dev, &connector->base); 217 connector->funcs->destroy(connector); 218 } 219 } 220 221 static int __drm_connector_init(struct drm_device *dev, 222 struct drm_connector *connector, 223 const struct drm_connector_funcs *funcs, 224 int connector_type, 225 struct i2c_adapter *ddc) 226 { 227 struct drm_mode_config *config = &dev->mode_config; 228 int ret; 229 struct ida *connector_ida = 230 &drm_connector_enum_list[connector_type].ida; 231 232 WARN_ON(drm_drv_uses_atomic_modeset(dev) && 233 (!funcs->atomic_destroy_state || 234 !funcs->atomic_duplicate_state)); 235 236 ret = __drm_mode_object_add(dev, &connector->base, 237 DRM_MODE_OBJECT_CONNECTOR, 238 false, drm_connector_free); 239 if (ret) 240 return ret; 241 242 connector->base.properties = &connector->properties; 243 connector->dev = dev; 244 connector->funcs = funcs; 245 246 /* connector index is used with 32bit bitmasks */ 247 ret = ida_alloc_max(&config->connector_ida, 31, GFP_KERNEL); 248 if (ret < 0) { 249 DRM_DEBUG_KMS("Failed to allocate %s connector index: %d\n", 250 drm_connector_enum_list[connector_type].name, 251 ret); 252 goto out_put; 253 } 254 connector->index = ret; 255 ret = 0; 256 257 connector->connector_type = connector_type; 258 connector->connector_type_id = 259 ida_alloc_min(connector_ida, 1, GFP_KERNEL); 260 if (connector->connector_type_id < 0) { 261 ret = connector->connector_type_id; 262 goto out_put_id; 263 } 264 connector->name = 265 kasprintf(GFP_KERNEL, "%s-%d", 266 drm_connector_enum_list[connector_type].name, 267 connector->connector_type_id); 268 if (!connector->name) { 269 ret = -ENOMEM; 270 goto out_put_type_id; 271 } 272 273 /* provide ddc symlink in sysfs */ 274 connector->ddc = ddc; 275 276 INIT_LIST_HEAD(&connector->global_connector_list_entry); 277 INIT_LIST_HEAD(&connector->probed_modes); 278 INIT_LIST_HEAD(&connector->modes); 279 mutex_init(&connector->mutex); 280 mutex_init(&connector->edid_override_mutex); 281 connector->edid_blob_ptr = NULL; 282 connector->epoch_counter = 0; 283 connector->tile_blob_ptr = NULL; 284 connector->status = connector_status_unknown; 285 connector->display_info.panel_orientation = 286 DRM_MODE_PANEL_ORIENTATION_UNKNOWN; 287 288 drm_connector_get_cmdline_mode(connector); 289 290 /* We should add connectors at the end to avoid upsetting the connector 291 * index too much. 292 */ 293 spin_lock_irq(&config->connector_list_lock); 294 list_add_tail(&connector->head, &config->connector_list); 295 config->num_connector++; 296 spin_unlock_irq(&config->connector_list_lock); 297 298 if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL && 299 connector_type != DRM_MODE_CONNECTOR_WRITEBACK) 300 drm_connector_attach_edid_property(connector); 301 302 drm_object_attach_property(&connector->base, 303 config->dpms_property, 0); 304 305 drm_object_attach_property(&connector->base, 306 config->link_status_property, 307 0); 308 309 drm_object_attach_property(&connector->base, 310 config->non_desktop_property, 311 0); 312 drm_object_attach_property(&connector->base, 313 config->tile_property, 314 0); 315 316 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { 317 drm_object_attach_property(&connector->base, config->prop_crtc_id, 0); 318 } 319 320 connector->debugfs_entry = NULL; 321 out_put_type_id: 322 if (ret) 323 ida_free(connector_ida, connector->connector_type_id); 324 out_put_id: 325 if (ret) 326 ida_free(&config->connector_ida, connector->index); 327 out_put: 328 if (ret) 329 drm_mode_object_unregister(dev, &connector->base); 330 331 return ret; 332 } 333 334 /** 335 * drm_connector_init - Init a preallocated connector 336 * @dev: DRM device 337 * @connector: the connector to init 338 * @funcs: callbacks for this connector 339 * @connector_type: user visible type of the connector 340 * 341 * Initialises a preallocated connector. Connectors should be 342 * subclassed as part of driver connector objects. 343 * 344 * At driver unload time the driver's &drm_connector_funcs.destroy hook 345 * should call drm_connector_cleanup() and free the connector structure. 346 * The connector structure should not be allocated with devm_kzalloc(). 347 * 348 * Note: consider using drmm_connector_init() instead of 349 * drm_connector_init() to let the DRM managed resource infrastructure 350 * take care of cleanup and deallocation. 351 * 352 * Returns: 353 * Zero on success, error code on failure. 354 */ 355 int drm_connector_init(struct drm_device *dev, 356 struct drm_connector *connector, 357 const struct drm_connector_funcs *funcs, 358 int connector_type) 359 { 360 if (drm_WARN_ON(dev, !(funcs && funcs->destroy))) 361 return -EINVAL; 362 363 return __drm_connector_init(dev, connector, funcs, connector_type, NULL); 364 } 365 EXPORT_SYMBOL(drm_connector_init); 366 367 /** 368 * drm_connector_init_with_ddc - Init a preallocated connector 369 * @dev: DRM device 370 * @connector: the connector to init 371 * @funcs: callbacks for this connector 372 * @connector_type: user visible type of the connector 373 * @ddc: pointer to the associated ddc adapter 374 * 375 * Initialises a preallocated connector. Connectors should be 376 * subclassed as part of driver connector objects. 377 * 378 * At driver unload time the driver's &drm_connector_funcs.destroy hook 379 * should call drm_connector_cleanup() and free the connector structure. 380 * The connector structure should not be allocated with devm_kzalloc(). 381 * 382 * Ensures that the ddc field of the connector is correctly set. 383 * 384 * Note: consider using drmm_connector_init() instead of 385 * drm_connector_init_with_ddc() to let the DRM managed resource 386 * infrastructure take care of cleanup and deallocation. 387 * 388 * Returns: 389 * Zero on success, error code on failure. 390 */ 391 int drm_connector_init_with_ddc(struct drm_device *dev, 392 struct drm_connector *connector, 393 const struct drm_connector_funcs *funcs, 394 int connector_type, 395 struct i2c_adapter *ddc) 396 { 397 if (drm_WARN_ON(dev, !(funcs && funcs->destroy))) 398 return -EINVAL; 399 400 return __drm_connector_init(dev, connector, funcs, connector_type, ddc); 401 } 402 EXPORT_SYMBOL(drm_connector_init_with_ddc); 403 404 static void drm_connector_cleanup_action(struct drm_device *dev, 405 void *ptr) 406 { 407 struct drm_connector *connector = ptr; 408 409 drm_connector_cleanup(connector); 410 } 411 412 /** 413 * drmm_connector_init - Init a preallocated connector 414 * @dev: DRM device 415 * @connector: the connector to init 416 * @funcs: callbacks for this connector 417 * @connector_type: user visible type of the connector 418 * @ddc: optional pointer to the associated ddc adapter 419 * 420 * Initialises a preallocated connector. Connectors should be 421 * subclassed as part of driver connector objects. 422 * 423 * Cleanup is automatically handled with a call to 424 * drm_connector_cleanup() in a DRM-managed action. 425 * 426 * The connector structure should be allocated with drmm_kzalloc(). 427 * 428 * Returns: 429 * Zero on success, error code on failure. 430 */ 431 int drmm_connector_init(struct drm_device *dev, 432 struct drm_connector *connector, 433 const struct drm_connector_funcs *funcs, 434 int connector_type, 435 struct i2c_adapter *ddc) 436 { 437 int ret; 438 439 if (drm_WARN_ON(dev, funcs && funcs->destroy)) 440 return -EINVAL; 441 442 ret = __drm_connector_init(dev, connector, funcs, connector_type, ddc); 443 if (ret) 444 return ret; 445 446 ret = drmm_add_action_or_reset(dev, drm_connector_cleanup_action, 447 connector); 448 if (ret) 449 return ret; 450 451 return 0; 452 } 453 EXPORT_SYMBOL(drmm_connector_init); 454 455 /** 456 * drm_connector_attach_edid_property - attach edid property. 457 * @connector: the connector 458 * 459 * Some connector types like DRM_MODE_CONNECTOR_VIRTUAL do not get a 460 * edid property attached by default. This function can be used to 461 * explicitly enable the edid property in these cases. 462 */ 463 void drm_connector_attach_edid_property(struct drm_connector *connector) 464 { 465 struct drm_mode_config *config = &connector->dev->mode_config; 466 467 drm_object_attach_property(&connector->base, 468 config->edid_property, 469 0); 470 } 471 EXPORT_SYMBOL(drm_connector_attach_edid_property); 472 473 /** 474 * drm_connector_attach_encoder - attach a connector to an encoder 475 * @connector: connector to attach 476 * @encoder: encoder to attach @connector to 477 * 478 * This function links up a connector to an encoder. Note that the routing 479 * restrictions between encoders and crtcs are exposed to userspace through the 480 * possible_clones and possible_crtcs bitmasks. 481 * 482 * Returns: 483 * Zero on success, negative errno on failure. 484 */ 485 int drm_connector_attach_encoder(struct drm_connector *connector, 486 struct drm_encoder *encoder) 487 { 488 /* 489 * In the past, drivers have attempted to model the static association 490 * of connector to encoder in simple connector/encoder devices using a 491 * direct assignment of connector->encoder = encoder. This connection 492 * is a logical one and the responsibility of the core, so drivers are 493 * expected not to mess with this. 494 * 495 * Note that the error return should've been enough here, but a large 496 * majority of drivers ignores the return value, so add in a big WARN 497 * to get people's attention. 498 */ 499 if (WARN_ON(connector->encoder)) 500 return -EINVAL; 501 502 connector->possible_encoders |= drm_encoder_mask(encoder); 503 504 return 0; 505 } 506 EXPORT_SYMBOL(drm_connector_attach_encoder); 507 508 /** 509 * drm_connector_has_possible_encoder - check if the connector and encoder are 510 * associated with each other 511 * @connector: the connector 512 * @encoder: the encoder 513 * 514 * Returns: 515 * True if @encoder is one of the possible encoders for @connector. 516 */ 517 bool drm_connector_has_possible_encoder(struct drm_connector *connector, 518 struct drm_encoder *encoder) 519 { 520 return connector->possible_encoders & drm_encoder_mask(encoder); 521 } 522 EXPORT_SYMBOL(drm_connector_has_possible_encoder); 523 524 static void drm_mode_remove(struct drm_connector *connector, 525 struct drm_display_mode *mode) 526 { 527 list_del(&mode->head); 528 drm_mode_destroy(connector->dev, mode); 529 } 530 531 /** 532 * drm_connector_cleanup - cleans up an initialised connector 533 * @connector: connector to cleanup 534 * 535 * Cleans up the connector but doesn't free the object. 536 */ 537 void drm_connector_cleanup(struct drm_connector *connector) 538 { 539 struct drm_device *dev = connector->dev; 540 struct drm_display_mode *mode, *t; 541 542 /* The connector should have been removed from userspace long before 543 * it is finally destroyed. 544 */ 545 if (WARN_ON(connector->registration_state == 546 DRM_CONNECTOR_REGISTERED)) 547 drm_connector_unregister(connector); 548 549 if (connector->privacy_screen) { 550 drm_privacy_screen_put(connector->privacy_screen); 551 connector->privacy_screen = NULL; 552 } 553 554 if (connector->tile_group) { 555 drm_mode_put_tile_group(dev, connector->tile_group); 556 connector->tile_group = NULL; 557 } 558 559 list_for_each_entry_safe(mode, t, &connector->probed_modes, head) 560 drm_mode_remove(connector, mode); 561 562 list_for_each_entry_safe(mode, t, &connector->modes, head) 563 drm_mode_remove(connector, mode); 564 565 ida_free(&drm_connector_enum_list[connector->connector_type].ida, 566 connector->connector_type_id); 567 568 ida_free(&dev->mode_config.connector_ida, connector->index); 569 570 kfree(connector->display_info.bus_formats); 571 kfree(connector->display_info.vics); 572 drm_mode_object_unregister(dev, &connector->base); 573 kfree(connector->name); 574 connector->name = NULL; 575 fwnode_handle_put(connector->fwnode); 576 connector->fwnode = NULL; 577 spin_lock_irq(&dev->mode_config.connector_list_lock); 578 list_del(&connector->head); 579 dev->mode_config.num_connector--; 580 spin_unlock_irq(&dev->mode_config.connector_list_lock); 581 582 WARN_ON(connector->state && !connector->funcs->atomic_destroy_state); 583 if (connector->state && connector->funcs->atomic_destroy_state) 584 connector->funcs->atomic_destroy_state(connector, 585 connector->state); 586 587 mutex_destroy(&connector->mutex); 588 589 memset(connector, 0, sizeof(*connector)); 590 591 if (dev->registered) 592 drm_sysfs_hotplug_event(dev); 593 } 594 EXPORT_SYMBOL(drm_connector_cleanup); 595 596 /** 597 * drm_connector_register - register a connector 598 * @connector: the connector to register 599 * 600 * Register userspace interfaces for a connector. Only call this for connectors 601 * which can be hotplugged after drm_dev_register() has been called already, 602 * e.g. DP MST connectors. All other connectors will be registered automatically 603 * when calling drm_dev_register(). 604 * 605 * When the connector is no longer available, callers must call 606 * drm_connector_unregister(). 607 * 608 * Returns: 609 * Zero on success, error code on failure. 610 */ 611 int drm_connector_register(struct drm_connector *connector) 612 { 613 int ret = 0; 614 615 if (!connector->dev->registered) 616 return 0; 617 618 mutex_lock(&connector->mutex); 619 if (connector->registration_state != DRM_CONNECTOR_INITIALIZING) 620 goto unlock; 621 622 ret = drm_sysfs_connector_add(connector); 623 if (ret) 624 goto unlock; 625 626 drm_debugfs_connector_add(connector); 627 628 if (connector->funcs->late_register) { 629 ret = connector->funcs->late_register(connector); 630 if (ret) 631 goto err_debugfs; 632 } 633 634 ret = drm_sysfs_connector_add_late(connector); 635 if (ret) 636 goto err_late_register; 637 638 drm_mode_object_register(connector->dev, &connector->base); 639 640 connector->registration_state = DRM_CONNECTOR_REGISTERED; 641 642 /* Let userspace know we have a new connector */ 643 drm_sysfs_connector_hotplug_event(connector); 644 645 if (connector->privacy_screen) 646 drm_privacy_screen_register_notifier(connector->privacy_screen, 647 &connector->privacy_screen_notifier); 648 649 mutex_lock(&connector_list_lock); 650 list_add_tail(&connector->global_connector_list_entry, &connector_list); 651 mutex_unlock(&connector_list_lock); 652 goto unlock; 653 654 err_late_register: 655 if (connector->funcs->early_unregister) 656 connector->funcs->early_unregister(connector); 657 err_debugfs: 658 drm_debugfs_connector_remove(connector); 659 drm_sysfs_connector_remove(connector); 660 unlock: 661 mutex_unlock(&connector->mutex); 662 return ret; 663 } 664 EXPORT_SYMBOL(drm_connector_register); 665 666 /** 667 * drm_connector_unregister - unregister a connector 668 * @connector: the connector to unregister 669 * 670 * Unregister userspace interfaces for a connector. Only call this for 671 * connectors which have been registered explicitly by calling 672 * drm_connector_register(). 673 */ 674 void drm_connector_unregister(struct drm_connector *connector) 675 { 676 mutex_lock(&connector->mutex); 677 if (connector->registration_state != DRM_CONNECTOR_REGISTERED) { 678 mutex_unlock(&connector->mutex); 679 return; 680 } 681 682 mutex_lock(&connector_list_lock); 683 list_del_init(&connector->global_connector_list_entry); 684 mutex_unlock(&connector_list_lock); 685 686 if (connector->privacy_screen) 687 drm_privacy_screen_unregister_notifier( 688 connector->privacy_screen, 689 &connector->privacy_screen_notifier); 690 691 drm_sysfs_connector_remove_early(connector); 692 693 if (connector->funcs->early_unregister) 694 connector->funcs->early_unregister(connector); 695 696 drm_debugfs_connector_remove(connector); 697 drm_sysfs_connector_remove(connector); 698 699 connector->registration_state = DRM_CONNECTOR_UNREGISTERED; 700 mutex_unlock(&connector->mutex); 701 } 702 EXPORT_SYMBOL(drm_connector_unregister); 703 704 void drm_connector_unregister_all(struct drm_device *dev) 705 { 706 struct drm_connector *connector; 707 struct drm_connector_list_iter conn_iter; 708 709 drm_connector_list_iter_begin(dev, &conn_iter); 710 drm_for_each_connector_iter(connector, &conn_iter) 711 drm_connector_unregister(connector); 712 drm_connector_list_iter_end(&conn_iter); 713 } 714 715 int drm_connector_register_all(struct drm_device *dev) 716 { 717 struct drm_connector *connector; 718 struct drm_connector_list_iter conn_iter; 719 int ret = 0; 720 721 drm_connector_list_iter_begin(dev, &conn_iter); 722 drm_for_each_connector_iter(connector, &conn_iter) { 723 ret = drm_connector_register(connector); 724 if (ret) 725 break; 726 } 727 drm_connector_list_iter_end(&conn_iter); 728 729 if (ret) 730 drm_connector_unregister_all(dev); 731 return ret; 732 } 733 734 /** 735 * drm_get_connector_status_name - return a string for connector status 736 * @status: connector status to compute name of 737 * 738 * In contrast to the other drm_get_*_name functions this one here returns a 739 * const pointer and hence is threadsafe. 740 * 741 * Returns: connector status string 742 */ 743 const char *drm_get_connector_status_name(enum drm_connector_status status) 744 { 745 if (status == connector_status_connected) 746 return "connected"; 747 else if (status == connector_status_disconnected) 748 return "disconnected"; 749 else 750 return "unknown"; 751 } 752 EXPORT_SYMBOL(drm_get_connector_status_name); 753 754 /** 755 * drm_get_connector_force_name - return a string for connector force 756 * @force: connector force to get name of 757 * 758 * Returns: const pointer to name. 759 */ 760 const char *drm_get_connector_force_name(enum drm_connector_force force) 761 { 762 switch (force) { 763 case DRM_FORCE_UNSPECIFIED: 764 return "unspecified"; 765 case DRM_FORCE_OFF: 766 return "off"; 767 case DRM_FORCE_ON: 768 return "on"; 769 case DRM_FORCE_ON_DIGITAL: 770 return "digital"; 771 default: 772 return "unknown"; 773 } 774 } 775 776 #ifdef CONFIG_LOCKDEP 777 static struct lockdep_map connector_list_iter_dep_map = { 778 .name = "drm_connector_list_iter" 779 }; 780 #endif 781 782 /** 783 * drm_connector_list_iter_begin - initialize a connector_list iterator 784 * @dev: DRM device 785 * @iter: connector_list iterator 786 * 787 * Sets @iter up to walk the &drm_mode_config.connector_list of @dev. @iter 788 * must always be cleaned up again by calling drm_connector_list_iter_end(). 789 * Iteration itself happens using drm_connector_list_iter_next() or 790 * drm_for_each_connector_iter(). 791 */ 792 void drm_connector_list_iter_begin(struct drm_device *dev, 793 struct drm_connector_list_iter *iter) 794 { 795 iter->dev = dev; 796 iter->conn = NULL; 797 lock_acquire_shared_recursive(&connector_list_iter_dep_map, 0, 1, NULL, _RET_IP_); 798 } 799 EXPORT_SYMBOL(drm_connector_list_iter_begin); 800 801 /* 802 * Extra-safe connector put function that works in any context. Should only be 803 * used from the connector_iter functions, where we never really expect to 804 * actually release the connector when dropping our final reference. 805 */ 806 static void 807 __drm_connector_put_safe(struct drm_connector *conn) 808 { 809 struct drm_mode_config *config = &conn->dev->mode_config; 810 811 lockdep_assert_held(&config->connector_list_lock); 812 813 if (!refcount_dec_and_test(&conn->base.refcount.refcount)) 814 return; 815 816 llist_add(&conn->free_node, &config->connector_free_list); 817 schedule_work(&config->connector_free_work); 818 } 819 820 /** 821 * drm_connector_list_iter_next - return next connector 822 * @iter: connector_list iterator 823 * 824 * Returns: the next connector for @iter, or NULL when the list walk has 825 * completed. 826 */ 827 struct drm_connector * 828 drm_connector_list_iter_next(struct drm_connector_list_iter *iter) 829 { 830 struct drm_connector *old_conn = iter->conn; 831 struct drm_mode_config *config = &iter->dev->mode_config; 832 struct list_head *lhead; 833 unsigned long flags; 834 835 spin_lock_irqsave(&config->connector_list_lock, flags); 836 lhead = old_conn ? &old_conn->head : &config->connector_list; 837 838 do { 839 if (lhead->next == &config->connector_list) { 840 iter->conn = NULL; 841 break; 842 } 843 844 lhead = lhead->next; 845 iter->conn = list_entry(lhead, struct drm_connector, head); 846 847 /* loop until it's not a zombie connector */ 848 } while (!kref_get_unless_zero(&iter->conn->base.refcount)); 849 850 if (old_conn) 851 __drm_connector_put_safe(old_conn); 852 spin_unlock_irqrestore(&config->connector_list_lock, flags); 853 854 return iter->conn; 855 } 856 EXPORT_SYMBOL(drm_connector_list_iter_next); 857 858 /** 859 * drm_connector_list_iter_end - tear down a connector_list iterator 860 * @iter: connector_list iterator 861 * 862 * Tears down @iter and releases any resources (like &drm_connector references) 863 * acquired while walking the list. This must always be called, both when the 864 * iteration completes fully or when it was aborted without walking the entire 865 * list. 866 */ 867 void drm_connector_list_iter_end(struct drm_connector_list_iter *iter) 868 { 869 struct drm_mode_config *config = &iter->dev->mode_config; 870 unsigned long flags; 871 872 iter->dev = NULL; 873 if (iter->conn) { 874 spin_lock_irqsave(&config->connector_list_lock, flags); 875 __drm_connector_put_safe(iter->conn); 876 spin_unlock_irqrestore(&config->connector_list_lock, flags); 877 } 878 lock_release(&connector_list_iter_dep_map, _RET_IP_); 879 } 880 EXPORT_SYMBOL(drm_connector_list_iter_end); 881 882 static const struct drm_prop_enum_list drm_subpixel_enum_list[] = { 883 { SubPixelUnknown, "Unknown" }, 884 { SubPixelHorizontalRGB, "Horizontal RGB" }, 885 { SubPixelHorizontalBGR, "Horizontal BGR" }, 886 { SubPixelVerticalRGB, "Vertical RGB" }, 887 { SubPixelVerticalBGR, "Vertical BGR" }, 888 { SubPixelNone, "None" }, 889 }; 890 891 /** 892 * drm_get_subpixel_order_name - return a string for a given subpixel enum 893 * @order: enum of subpixel_order 894 * 895 * Note you could abuse this and return something out of bounds, but that 896 * would be a caller error. No unscrubbed user data should make it here. 897 * 898 * Returns: string describing an enumerated subpixel property 899 */ 900 const char *drm_get_subpixel_order_name(enum subpixel_order order) 901 { 902 return drm_subpixel_enum_list[order].name; 903 } 904 EXPORT_SYMBOL(drm_get_subpixel_order_name); 905 906 static const struct drm_prop_enum_list drm_dpms_enum_list[] = { 907 { DRM_MODE_DPMS_ON, "On" }, 908 { DRM_MODE_DPMS_STANDBY, "Standby" }, 909 { DRM_MODE_DPMS_SUSPEND, "Suspend" }, 910 { DRM_MODE_DPMS_OFF, "Off" } 911 }; 912 DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list) 913 914 static const struct drm_prop_enum_list drm_link_status_enum_list[] = { 915 { DRM_MODE_LINK_STATUS_GOOD, "Good" }, 916 { DRM_MODE_LINK_STATUS_BAD, "Bad" }, 917 }; 918 919 /** 920 * drm_display_info_set_bus_formats - set the supported bus formats 921 * @info: display info to store bus formats in 922 * @formats: array containing the supported bus formats 923 * @num_formats: the number of entries in the fmts array 924 * 925 * Store the supported bus formats in display info structure. 926 * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for 927 * a full list of available formats. 928 * 929 * Returns: 930 * 0 on success or a negative error code on failure. 931 */ 932 int drm_display_info_set_bus_formats(struct drm_display_info *info, 933 const u32 *formats, 934 unsigned int num_formats) 935 { 936 u32 *fmts = NULL; 937 938 if (!formats && num_formats) 939 return -EINVAL; 940 941 if (formats && num_formats) { 942 fmts = kmemdup(formats, sizeof(*formats) * num_formats, 943 GFP_KERNEL); 944 if (!fmts) 945 return -ENOMEM; 946 } 947 948 kfree(info->bus_formats); 949 info->bus_formats = fmts; 950 info->num_bus_formats = num_formats; 951 952 return 0; 953 } 954 EXPORT_SYMBOL(drm_display_info_set_bus_formats); 955 956 /* Optional connector properties. */ 957 static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = { 958 { DRM_MODE_SCALE_NONE, "None" }, 959 { DRM_MODE_SCALE_FULLSCREEN, "Full" }, 960 { DRM_MODE_SCALE_CENTER, "Center" }, 961 { DRM_MODE_SCALE_ASPECT, "Full aspect" }, 962 }; 963 964 static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = { 965 { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" }, 966 { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" }, 967 { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, 968 }; 969 970 static const struct drm_prop_enum_list drm_content_type_enum_list[] = { 971 { DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" }, 972 { DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" }, 973 { DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" }, 974 { DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" }, 975 { DRM_MODE_CONTENT_TYPE_GAME, "Game" }, 976 }; 977 978 static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = { 979 { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" }, 980 { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside Down" }, 981 { DRM_MODE_PANEL_ORIENTATION_LEFT_UP, "Left Side Up" }, 982 { DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, "Right Side Up" }, 983 }; 984 985 static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = { 986 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */ 987 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */ 988 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */ 989 }; 990 DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list) 991 992 static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = { 993 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I, TV-out and DP */ 994 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */ 995 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */ 996 }; 997 DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name, 998 drm_dvi_i_subconnector_enum_list) 999 1000 static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = { 1001 { DRM_MODE_TV_MODE_NTSC, "NTSC" }, 1002 { DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" }, 1003 { DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" }, 1004 { DRM_MODE_TV_MODE_PAL, "PAL" }, 1005 { DRM_MODE_TV_MODE_PAL_M, "PAL-M" }, 1006 { DRM_MODE_TV_MODE_PAL_N, "PAL-N" }, 1007 { DRM_MODE_TV_MODE_SECAM, "SECAM" }, 1008 }; 1009 DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list) 1010 1011 /** 1012 * drm_get_tv_mode_from_name - Translates a TV mode name into its enum value 1013 * @name: TV Mode name we want to convert 1014 * @len: Length of @name 1015 * 1016 * Translates @name into an enum drm_connector_tv_mode. 1017 * 1018 * Returns: the enum value on success, a negative errno otherwise. 1019 */ 1020 int drm_get_tv_mode_from_name(const char *name, size_t len) 1021 { 1022 unsigned int i; 1023 1024 for (i = 0; i < ARRAY_SIZE(drm_tv_mode_enum_list); i++) { 1025 const struct drm_prop_enum_list *item = &drm_tv_mode_enum_list[i]; 1026 1027 if (strlen(item->name) == len && !strncmp(item->name, name, len)) 1028 return item->type; 1029 } 1030 1031 return -EINVAL; 1032 } 1033 EXPORT_SYMBOL(drm_get_tv_mode_from_name); 1034 1035 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = { 1036 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */ 1037 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */ 1038 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */ 1039 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */ 1040 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */ 1041 }; 1042 DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list) 1043 1044 static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = { 1045 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I, TV-out and DP */ 1046 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */ 1047 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */ 1048 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */ 1049 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */ 1050 }; 1051 DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name, 1052 drm_tv_subconnector_enum_list) 1053 1054 static const struct drm_prop_enum_list drm_dp_subconnector_enum_list[] = { 1055 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I, TV-out and DP */ 1056 { DRM_MODE_SUBCONNECTOR_VGA, "VGA" }, /* DP */ 1057 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DP */ 1058 { DRM_MODE_SUBCONNECTOR_HDMIA, "HDMI" }, /* DP */ 1059 { DRM_MODE_SUBCONNECTOR_DisplayPort, "DP" }, /* DP */ 1060 { DRM_MODE_SUBCONNECTOR_Wireless, "Wireless" }, /* DP */ 1061 { DRM_MODE_SUBCONNECTOR_Native, "Native" }, /* DP */ 1062 }; 1063 1064 DRM_ENUM_NAME_FN(drm_get_dp_subconnector_name, 1065 drm_dp_subconnector_enum_list) 1066 1067 1068 static const char * const colorspace_names[] = { 1069 /* For Default case, driver will set the colorspace */ 1070 [DRM_MODE_COLORIMETRY_DEFAULT] = "Default", 1071 /* Standard Definition Colorimetry based on CEA 861 */ 1072 [DRM_MODE_COLORIMETRY_SMPTE_170M_YCC] = "SMPTE_170M_YCC", 1073 [DRM_MODE_COLORIMETRY_BT709_YCC] = "BT709_YCC", 1074 /* Standard Definition Colorimetry based on IEC 61966-2-4 */ 1075 [DRM_MODE_COLORIMETRY_XVYCC_601] = "XVYCC_601", 1076 /* High Definition Colorimetry based on IEC 61966-2-4 */ 1077 [DRM_MODE_COLORIMETRY_XVYCC_709] = "XVYCC_709", 1078 /* Colorimetry based on IEC 61966-2-1/Amendment 1 */ 1079 [DRM_MODE_COLORIMETRY_SYCC_601] = "SYCC_601", 1080 /* Colorimetry based on IEC 61966-2-5 [33] */ 1081 [DRM_MODE_COLORIMETRY_OPYCC_601] = "opYCC_601", 1082 /* Colorimetry based on IEC 61966-2-5 */ 1083 [DRM_MODE_COLORIMETRY_OPRGB] = "opRGB", 1084 /* Colorimetry based on ITU-R BT.2020 */ 1085 [DRM_MODE_COLORIMETRY_BT2020_CYCC] = "BT2020_CYCC", 1086 /* Colorimetry based on ITU-R BT.2020 */ 1087 [DRM_MODE_COLORIMETRY_BT2020_RGB] = "BT2020_RGB", 1088 /* Colorimetry based on ITU-R BT.2020 */ 1089 [DRM_MODE_COLORIMETRY_BT2020_YCC] = "BT2020_YCC", 1090 /* Added as part of Additional Colorimetry Extension in 861.G */ 1091 [DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65] = "DCI-P3_RGB_D65", 1092 [DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER] = "DCI-P3_RGB_Theater", 1093 [DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED] = "RGB_WIDE_FIXED", 1094 /* Colorimetry based on scRGB (IEC 61966-2-2) */ 1095 [DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT] = "RGB_WIDE_FLOAT", 1096 [DRM_MODE_COLORIMETRY_BT601_YCC] = "BT601_YCC", 1097 }; 1098 1099 /** 1100 * drm_get_colorspace_name - return a string for color encoding 1101 * @colorspace: color space to compute name of 1102 * 1103 * In contrast to the other drm_get_*_name functions this one here returns a 1104 * const pointer and hence is threadsafe. 1105 */ 1106 const char *drm_get_colorspace_name(enum drm_colorspace colorspace) 1107 { 1108 if (colorspace < ARRAY_SIZE(colorspace_names) && colorspace_names[colorspace]) 1109 return colorspace_names[colorspace]; 1110 else 1111 return "(null)"; 1112 } 1113 1114 static const u32 hdmi_colorspaces = 1115 BIT(DRM_MODE_COLORIMETRY_SMPTE_170M_YCC) | 1116 BIT(DRM_MODE_COLORIMETRY_BT709_YCC) | 1117 BIT(DRM_MODE_COLORIMETRY_XVYCC_601) | 1118 BIT(DRM_MODE_COLORIMETRY_XVYCC_709) | 1119 BIT(DRM_MODE_COLORIMETRY_SYCC_601) | 1120 BIT(DRM_MODE_COLORIMETRY_OPYCC_601) | 1121 BIT(DRM_MODE_COLORIMETRY_OPRGB) | 1122 BIT(DRM_MODE_COLORIMETRY_BT2020_CYCC) | 1123 BIT(DRM_MODE_COLORIMETRY_BT2020_RGB) | 1124 BIT(DRM_MODE_COLORIMETRY_BT2020_YCC) | 1125 BIT(DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65) | 1126 BIT(DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER); 1127 1128 /* 1129 * As per DP 1.4a spec, 2.2.5.7.5 VSC SDP Payload for Pixel Encoding/Colorimetry 1130 * Format Table 2-120 1131 */ 1132 static const u32 dp_colorspaces = 1133 BIT(DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED) | 1134 BIT(DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT) | 1135 BIT(DRM_MODE_COLORIMETRY_OPRGB) | 1136 BIT(DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65) | 1137 BIT(DRM_MODE_COLORIMETRY_BT2020_RGB) | 1138 BIT(DRM_MODE_COLORIMETRY_BT601_YCC) | 1139 BIT(DRM_MODE_COLORIMETRY_BT709_YCC) | 1140 BIT(DRM_MODE_COLORIMETRY_XVYCC_601) | 1141 BIT(DRM_MODE_COLORIMETRY_XVYCC_709) | 1142 BIT(DRM_MODE_COLORIMETRY_SYCC_601) | 1143 BIT(DRM_MODE_COLORIMETRY_OPYCC_601) | 1144 BIT(DRM_MODE_COLORIMETRY_BT2020_CYCC) | 1145 BIT(DRM_MODE_COLORIMETRY_BT2020_YCC); 1146 1147 /** 1148 * DOC: standard connector properties 1149 * 1150 * DRM connectors have a few standardized properties: 1151 * 1152 * EDID: 1153 * Blob property which contains the current EDID read from the sink. This 1154 * is useful to parse sink identification information like vendor, model 1155 * and serial. Drivers should update this property by calling 1156 * drm_connector_update_edid_property(), usually after having parsed 1157 * the EDID using drm_add_edid_modes(). Userspace cannot change this 1158 * property. 1159 * 1160 * User-space should not parse the EDID to obtain information exposed via 1161 * other KMS properties (because the kernel might apply limits, quirks or 1162 * fixups to the EDID). For instance, user-space should not try to parse 1163 * mode lists from the EDID. 1164 * DPMS: 1165 * Legacy property for setting the power state of the connector. For atomic 1166 * drivers this is only provided for backwards compatibility with existing 1167 * drivers, it remaps to controlling the "ACTIVE" property on the CRTC the 1168 * connector is linked to. Drivers should never set this property directly, 1169 * it is handled by the DRM core by calling the &drm_connector_funcs.dpms 1170 * callback. For atomic drivers the remapping to the "ACTIVE" property is 1171 * implemented in the DRM core. 1172 * 1173 * Note that this property cannot be set through the MODE_ATOMIC ioctl, 1174 * userspace must use "ACTIVE" on the CRTC instead. 1175 * 1176 * WARNING: 1177 * 1178 * For userspace also running on legacy drivers the "DPMS" semantics are a 1179 * lot more complicated. First, userspace cannot rely on the "DPMS" value 1180 * returned by the GETCONNECTOR actually reflecting reality, because many 1181 * drivers fail to update it. For atomic drivers this is taken care of in 1182 * drm_atomic_helper_update_legacy_modeset_state(). 1183 * 1184 * The second issue is that the DPMS state is only well-defined when the 1185 * connector is connected to a CRTC. In atomic the DRM core enforces that 1186 * "ACTIVE" is off in such a case, no such checks exists for "DPMS". 1187 * 1188 * Finally, when enabling an output using the legacy SETCONFIG ioctl then 1189 * "DPMS" is forced to ON. But see above, that might not be reflected in 1190 * the software value on legacy drivers. 1191 * 1192 * Summarizing: Only set "DPMS" when the connector is known to be enabled, 1193 * assume that a successful SETCONFIG call also sets "DPMS" to on, and 1194 * never read back the value of "DPMS" because it can be incorrect. 1195 * PATH: 1196 * Connector path property to identify how this sink is physically 1197 * connected. Used by DP MST. This should be set by calling 1198 * drm_connector_set_path_property(), in the case of DP MST with the 1199 * path property the MST manager created. Userspace cannot change this 1200 * property. 1201 * 1202 * In the case of DP MST, the property has the format 1203 * ``mst:<parent>-<ports>`` where ``<parent>`` is the KMS object ID of the 1204 * parent connector and ``<ports>`` is a hyphen-separated list of DP MST 1205 * port numbers. Note, KMS object IDs are not guaranteed to be stable 1206 * across reboots. 1207 * TILE: 1208 * Connector tile group property to indicate how a set of DRM connector 1209 * compose together into one logical screen. This is used by both high-res 1210 * external screens (often only using a single cable, but exposing multiple 1211 * DP MST sinks), or high-res integrated panels (like dual-link DSI) which 1212 * are not gen-locked. Note that for tiled panels which are genlocked, like 1213 * dual-link LVDS or dual-link DSI, the driver should try to not expose the 1214 * tiling and virtualise both &drm_crtc and &drm_plane if needed. Drivers 1215 * should update this value using drm_connector_set_tile_property(). 1216 * Userspace cannot change this property. 1217 * link-status: 1218 * Connector link-status property to indicate the status of link. The 1219 * default value of link-status is "GOOD". If something fails during or 1220 * after modeset, the kernel driver may set this to "BAD" and issue a 1221 * hotplug uevent. Drivers should update this value using 1222 * drm_connector_set_link_status_property(). 1223 * 1224 * When user-space receives the hotplug uevent and detects a "BAD" 1225 * link-status, the sink doesn't receive pixels anymore (e.g. the screen 1226 * becomes completely black). The list of available modes may have 1227 * changed. User-space is expected to pick a new mode if the current one 1228 * has disappeared and perform a new modeset with link-status set to 1229 * "GOOD" to re-enable the connector. 1230 * 1231 * If multiple connectors share the same CRTC and one of them gets a "BAD" 1232 * link-status, the other are unaffected (ie. the sinks still continue to 1233 * receive pixels). 1234 * 1235 * When user-space performs an atomic commit on a connector with a "BAD" 1236 * link-status without resetting the property to "GOOD", the sink may 1237 * still not receive pixels. When user-space performs an atomic commit 1238 * which resets the link-status property to "GOOD" without the 1239 * ALLOW_MODESET flag set, it might fail because a modeset is required. 1240 * 1241 * User-space can only change link-status to "GOOD", changing it to "BAD" 1242 * is a no-op. 1243 * 1244 * For backwards compatibility with non-atomic userspace the kernel 1245 * tries to automatically set the link-status back to "GOOD" in the 1246 * SETCRTC IOCTL. This might fail if the mode is no longer valid, similar 1247 * to how it might fail if a different screen has been connected in the 1248 * interim. 1249 * non_desktop: 1250 * Indicates the output should be ignored for purposes of displaying a 1251 * standard desktop environment or console. This is most likely because 1252 * the output device is not rectilinear. 1253 * Content Protection: 1254 * This property is used by userspace to request the kernel protect future 1255 * content communicated over the link. When requested, kernel will apply 1256 * the appropriate means of protection (most often HDCP), and use the 1257 * property to tell userspace the protection is active. 1258 * 1259 * Drivers can set this up by calling 1260 * drm_connector_attach_content_protection_property() on initialization. 1261 * 1262 * The value of this property can be one of the following: 1263 * 1264 * DRM_MODE_CONTENT_PROTECTION_UNDESIRED = 0 1265 * The link is not protected, content is transmitted in the clear. 1266 * DRM_MODE_CONTENT_PROTECTION_DESIRED = 1 1267 * Userspace has requested content protection, but the link is not 1268 * currently protected. When in this state, kernel should enable 1269 * Content Protection as soon as possible. 1270 * DRM_MODE_CONTENT_PROTECTION_ENABLED = 2 1271 * Userspace has requested content protection, and the link is 1272 * protected. Only the driver can set the property to this value. 1273 * If userspace attempts to set to ENABLED, kernel will return 1274 * -EINVAL. 1275 * 1276 * A few guidelines: 1277 * 1278 * - DESIRED state should be preserved until userspace de-asserts it by 1279 * setting the property to UNDESIRED. This means ENABLED should only 1280 * transition to UNDESIRED when the user explicitly requests it. 1281 * - If the state is DESIRED, kernel should attempt to re-authenticate the 1282 * link whenever possible. This includes across disable/enable, dpms, 1283 * hotplug, downstream device changes, link status failures, etc.. 1284 * - Kernel sends uevent with the connector id and property id through 1285 * @drm_hdcp_update_content_protection, upon below kernel triggered 1286 * scenarios: 1287 * 1288 * - DESIRED -> ENABLED (authentication success) 1289 * - ENABLED -> DESIRED (termination of authentication) 1290 * - Please note no uevents for userspace triggered property state changes, 1291 * which can't fail such as 1292 * 1293 * - DESIRED/ENABLED -> UNDESIRED 1294 * - UNDESIRED -> DESIRED 1295 * - Userspace is responsible for polling the property or listen to uevents 1296 * to determine when the value transitions from ENABLED to DESIRED. 1297 * This signifies the link is no longer protected and userspace should 1298 * take appropriate action (whatever that might be). 1299 * 1300 * HDCP Content Type: 1301 * This Enum property is used by the userspace to declare the content type 1302 * of the display stream, to kernel. Here display stream stands for any 1303 * display content that userspace intended to display through HDCP 1304 * encryption. 1305 * 1306 * Content Type of a stream is decided by the owner of the stream, as 1307 * "HDCP Type0" or "HDCP Type1". 1308 * 1309 * The value of the property can be one of the below: 1310 * - "HDCP Type0": DRM_MODE_HDCP_CONTENT_TYPE0 = 0 1311 * - "HDCP Type1": DRM_MODE_HDCP_CONTENT_TYPE1 = 1 1312 * 1313 * When kernel starts the HDCP authentication (see "Content Protection" 1314 * for details), it uses the content type in "HDCP Content Type" 1315 * for performing the HDCP authentication with the display sink. 1316 * 1317 * Please note in HDCP spec versions, a link can be authenticated with 1318 * HDCP 2.2 for Content Type 0/Content Type 1. Where as a link can be 1319 * authenticated with HDCP1.4 only for Content Type 0(though it is implicit 1320 * in nature. As there is no reference for Content Type in HDCP1.4). 1321 * 1322 * HDCP2.2 authentication protocol itself takes the "Content Type" as a 1323 * parameter, which is a input for the DP HDCP2.2 encryption algo. 1324 * 1325 * In case of Type 0 content protection request, kernel driver can choose 1326 * either of HDCP spec versions 1.4 and 2.2. When HDCP2.2 is used for 1327 * "HDCP Type 0", a HDCP 2.2 capable repeater in the downstream can send 1328 * that content to a HDCP 1.4 authenticated HDCP sink (Type0 link). 1329 * But if the content is classified as "HDCP Type 1", above mentioned 1330 * HDCP 2.2 repeater wont send the content to the HDCP sink as it can't 1331 * authenticate the HDCP1.4 capable sink for "HDCP Type 1". 1332 * 1333 * Please note userspace can be ignorant of the HDCP versions used by the 1334 * kernel driver to achieve the "HDCP Content Type". 1335 * 1336 * At current scenario, classifying a content as Type 1 ensures that the 1337 * content will be displayed only through the HDCP2.2 encrypted link. 1338 * 1339 * Note that the HDCP Content Type property is introduced at HDCP 2.2, and 1340 * defaults to type 0. It is only exposed by drivers supporting HDCP 2.2 1341 * (hence supporting Type 0 and Type 1). Based on how next versions of 1342 * HDCP specs are defined content Type could be used for higher versions 1343 * too. 1344 * 1345 * If content type is changed when "Content Protection" is not UNDESIRED, 1346 * then kernel will disable the HDCP and re-enable with new type in the 1347 * same atomic commit. And when "Content Protection" is ENABLED, it means 1348 * that link is HDCP authenticated and encrypted, for the transmission of 1349 * the Type of stream mentioned at "HDCP Content Type". 1350 * 1351 * HDR_OUTPUT_METADATA: 1352 * Connector property to enable userspace to send HDR Metadata to 1353 * driver. This metadata is based on the composition and blending 1354 * policies decided by user, taking into account the hardware and 1355 * sink capabilities. The driver gets this metadata and creates a 1356 * Dynamic Range and Mastering Infoframe (DRM) in case of HDMI, 1357 * SDP packet (Non-audio INFOFRAME SDP v1.3) for DP. This is then 1358 * sent to sink. This notifies the sink of the upcoming frame's Color 1359 * Encoding and Luminance parameters. 1360 * 1361 * Userspace first need to detect the HDR capabilities of sink by 1362 * reading and parsing the EDID. Details of HDR metadata for HDMI 1363 * are added in CTA 861.G spec. For DP , its defined in VESA DP 1364 * Standard v1.4. It needs to then get the metadata information 1365 * of the video/game/app content which are encoded in HDR (basically 1366 * using HDR transfer functions). With this information it needs to 1367 * decide on a blending policy and compose the relevant 1368 * layers/overlays into a common format. Once this blending is done, 1369 * userspace will be aware of the metadata of the composed frame to 1370 * be send to sink. It then uses this property to communicate this 1371 * metadata to driver which then make a Infoframe packet and sends 1372 * to sink based on the type of encoder connected. 1373 * 1374 * Userspace will be responsible to do Tone mapping operation in case: 1375 * - Some layers are HDR and others are SDR 1376 * - HDR layers luminance is not same as sink 1377 * 1378 * It will even need to do colorspace conversion and get all layers 1379 * to one common colorspace for blending. It can use either GL, Media 1380 * or display engine to get this done based on the capabilities of the 1381 * associated hardware. 1382 * 1383 * Driver expects metadata to be put in &struct hdr_output_metadata 1384 * structure from userspace. This is received as blob and stored in 1385 * &drm_connector_state.hdr_output_metadata. It parses EDID and saves the 1386 * sink metadata in &struct hdr_sink_metadata, as 1387 * &drm_connector.hdr_sink_metadata. Driver uses 1388 * drm_hdmi_infoframe_set_hdr_metadata() helper to set the HDR metadata, 1389 * hdmi_drm_infoframe_pack() to pack the infoframe as per spec, in case of 1390 * HDMI encoder. 1391 * 1392 * max bpc: 1393 * This range property is used by userspace to limit the bit depth. When 1394 * used the driver would limit the bpc in accordance with the valid range 1395 * supported by the hardware and sink. Drivers to use the function 1396 * drm_connector_attach_max_bpc_property() to create and attach the 1397 * property to the connector during initialization. 1398 * 1399 * Connectors also have one standardized atomic property: 1400 * 1401 * CRTC_ID: 1402 * Mode object ID of the &drm_crtc this connector should be connected to. 1403 * 1404 * Connectors for LCD panels may also have one standardized property: 1405 * 1406 * panel orientation: 1407 * On some devices the LCD panel is mounted in the casing in such a way 1408 * that the up/top side of the panel does not match with the top side of 1409 * the device. Userspace can use this property to check for this. 1410 * Note that input coordinates from touchscreens (input devices with 1411 * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel 1412 * coordinates, so if userspace rotates the picture to adjust for 1413 * the orientation it must also apply the same transformation to the 1414 * touchscreen input coordinates. This property is initialized by calling 1415 * drm_connector_set_panel_orientation() or 1416 * drm_connector_set_panel_orientation_with_quirk() 1417 * 1418 * scaling mode: 1419 * This property defines how a non-native mode is upscaled to the native 1420 * mode of an LCD panel: 1421 * 1422 * None: 1423 * No upscaling happens, scaling is left to the panel. Not all 1424 * drivers expose this mode. 1425 * Full: 1426 * The output is upscaled to the full resolution of the panel, 1427 * ignoring the aspect ratio. 1428 * Center: 1429 * No upscaling happens, the output is centered within the native 1430 * resolution the panel. 1431 * Full aspect: 1432 * The output is upscaled to maximize either the width or height 1433 * while retaining the aspect ratio. 1434 * 1435 * This property should be set up by calling 1436 * drm_connector_attach_scaling_mode_property(). Note that drivers 1437 * can also expose this property to external outputs, in which case they 1438 * must support "None", which should be the default (since external screens 1439 * have a built-in scaler). 1440 * 1441 * subconnector: 1442 * This property is used by DVI-I, TVout and DisplayPort to indicate different 1443 * connector subtypes. Enum values more or less match with those from main 1444 * connector types. 1445 * For DVI-I and TVout there is also a matching property "select subconnector" 1446 * allowing to switch between signal types. 1447 * DP subconnector corresponds to a downstream port. 1448 * 1449 * privacy-screen sw-state, privacy-screen hw-state: 1450 * These 2 optional properties can be used to query the state of the 1451 * electronic privacy screen that is available on some displays; and in 1452 * some cases also control the state. If a driver implements these 1453 * properties then both properties must be present. 1454 * 1455 * "privacy-screen hw-state" is read-only and reflects the actual state 1456 * of the privacy-screen, possible values: "Enabled", "Disabled, 1457 * "Enabled-locked", "Disabled-locked". The locked states indicate 1458 * that the state cannot be changed through the DRM API. E.g. there 1459 * might be devices where the firmware-setup options, or a hardware 1460 * slider-switch, offer always on / off modes. 1461 * 1462 * "privacy-screen sw-state" can be set to change the privacy-screen state 1463 * when not locked. In this case the driver must update the hw-state 1464 * property to reflect the new state on completion of the commit of the 1465 * sw-state property. Setting the sw-state property when the hw-state is 1466 * locked must be interpreted by the driver as a request to change the 1467 * state to the set state when the hw-state becomes unlocked. E.g. if 1468 * "privacy-screen hw-state" is "Enabled-locked" and the sw-state 1469 * gets set to "Disabled" followed by the user unlocking the state by 1470 * changing the slider-switch position, then the driver must set the 1471 * state to "Disabled" upon receiving the unlock event. 1472 * 1473 * In some cases the privacy-screen's actual state might change outside of 1474 * control of the DRM code. E.g. there might be a firmware handled hotkey 1475 * which toggles the actual state, or the actual state might be changed 1476 * through another userspace API such as writing /proc/acpi/ibm/lcdshadow. 1477 * In this case the driver must update both the hw-state and the sw-state 1478 * to reflect the new value, overwriting any pending state requests in the 1479 * sw-state. Any pending sw-state requests are thus discarded. 1480 * 1481 * Note that the ability for the state to change outside of control of 1482 * the DRM master process means that userspace must not cache the value 1483 * of the sw-state. Caching the sw-state value and including it in later 1484 * atomic commits may lead to overriding a state change done through e.g. 1485 * a firmware handled hotkey. Therefor userspace must not include the 1486 * privacy-screen sw-state in an atomic commit unless it wants to change 1487 * its value. 1488 * 1489 * left margin, right margin, top margin, bottom margin: 1490 * Add margins to the connector's viewport. This is typically used to 1491 * mitigate overscan on TVs. 1492 * 1493 * The value is the size in pixels of the black border which will be 1494 * added. The attached CRTC's content will be scaled to fill the whole 1495 * area inside the margin. 1496 * 1497 * The margins configuration might be sent to the sink, e.g. via HDMI AVI 1498 * InfoFrames. 1499 * 1500 * Drivers can set up these properties by calling 1501 * drm_mode_create_tv_margin_properties(). 1502 */ 1503 1504 int drm_connector_create_standard_properties(struct drm_device *dev) 1505 { 1506 struct drm_property *prop; 1507 1508 prop = drm_property_create(dev, DRM_MODE_PROP_BLOB | 1509 DRM_MODE_PROP_IMMUTABLE, 1510 "EDID", 0); 1511 if (!prop) 1512 return -ENOMEM; 1513 dev->mode_config.edid_property = prop; 1514 1515 prop = drm_property_create_enum(dev, 0, 1516 "DPMS", drm_dpms_enum_list, 1517 ARRAY_SIZE(drm_dpms_enum_list)); 1518 if (!prop) 1519 return -ENOMEM; 1520 dev->mode_config.dpms_property = prop; 1521 1522 prop = drm_property_create(dev, 1523 DRM_MODE_PROP_BLOB | 1524 DRM_MODE_PROP_IMMUTABLE, 1525 "PATH", 0); 1526 if (!prop) 1527 return -ENOMEM; 1528 dev->mode_config.path_property = prop; 1529 1530 prop = drm_property_create(dev, 1531 DRM_MODE_PROP_BLOB | 1532 DRM_MODE_PROP_IMMUTABLE, 1533 "TILE", 0); 1534 if (!prop) 1535 return -ENOMEM; 1536 dev->mode_config.tile_property = prop; 1537 1538 prop = drm_property_create_enum(dev, 0, "link-status", 1539 drm_link_status_enum_list, 1540 ARRAY_SIZE(drm_link_status_enum_list)); 1541 if (!prop) 1542 return -ENOMEM; 1543 dev->mode_config.link_status_property = prop; 1544 1545 prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE, "non-desktop"); 1546 if (!prop) 1547 return -ENOMEM; 1548 dev->mode_config.non_desktop_property = prop; 1549 1550 prop = drm_property_create(dev, DRM_MODE_PROP_BLOB, 1551 "HDR_OUTPUT_METADATA", 0); 1552 if (!prop) 1553 return -ENOMEM; 1554 dev->mode_config.hdr_output_metadata_property = prop; 1555 1556 return 0; 1557 } 1558 1559 /** 1560 * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties 1561 * @dev: DRM device 1562 * 1563 * Called by a driver the first time a DVI-I connector is made. 1564 * 1565 * Returns: %0 1566 */ 1567 int drm_mode_create_dvi_i_properties(struct drm_device *dev) 1568 { 1569 struct drm_property *dvi_i_selector; 1570 struct drm_property *dvi_i_subconnector; 1571 1572 if (dev->mode_config.dvi_i_select_subconnector_property) 1573 return 0; 1574 1575 dvi_i_selector = 1576 drm_property_create_enum(dev, 0, 1577 "select subconnector", 1578 drm_dvi_i_select_enum_list, 1579 ARRAY_SIZE(drm_dvi_i_select_enum_list)); 1580 dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector; 1581 1582 dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, 1583 "subconnector", 1584 drm_dvi_i_subconnector_enum_list, 1585 ARRAY_SIZE(drm_dvi_i_subconnector_enum_list)); 1586 dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector; 1587 1588 return 0; 1589 } 1590 EXPORT_SYMBOL(drm_mode_create_dvi_i_properties); 1591 1592 /** 1593 * drm_connector_attach_dp_subconnector_property - create subconnector property for DP 1594 * @connector: drm_connector to attach property 1595 * 1596 * Called by a driver when DP connector is created. 1597 */ 1598 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector) 1599 { 1600 struct drm_mode_config *mode_config = &connector->dev->mode_config; 1601 1602 if (!mode_config->dp_subconnector_property) 1603 mode_config->dp_subconnector_property = 1604 drm_property_create_enum(connector->dev, 1605 DRM_MODE_PROP_IMMUTABLE, 1606 "subconnector", 1607 drm_dp_subconnector_enum_list, 1608 ARRAY_SIZE(drm_dp_subconnector_enum_list)); 1609 1610 drm_object_attach_property(&connector->base, 1611 mode_config->dp_subconnector_property, 1612 DRM_MODE_SUBCONNECTOR_Unknown); 1613 } 1614 EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property); 1615 1616 /** 1617 * DOC: HDMI connector properties 1618 * 1619 * content type (HDMI specific): 1620 * Indicates content type setting to be used in HDMI infoframes to indicate 1621 * content type for the external device, so that it adjusts its display 1622 * settings accordingly. 1623 * 1624 * The value of this property can be one of the following: 1625 * 1626 * No Data: 1627 * Content type is unknown 1628 * Graphics: 1629 * Content type is graphics 1630 * Photo: 1631 * Content type is photo 1632 * Cinema: 1633 * Content type is cinema 1634 * Game: 1635 * Content type is game 1636 * 1637 * The meaning of each content type is defined in CTA-861-G table 15. 1638 * 1639 * Drivers can set up this property by calling 1640 * drm_connector_attach_content_type_property(). Decoding to 1641 * infoframe values is done through drm_hdmi_avi_infoframe_content_type(). 1642 */ 1643 1644 /* 1645 * TODO: Document the properties: 1646 * - brightness 1647 * - contrast 1648 * - flicker reduction 1649 * - hue 1650 * - mode 1651 * - overscan 1652 * - saturation 1653 * - select subconnector 1654 */ 1655 /** 1656 * DOC: Analog TV Connector Properties 1657 * 1658 * TV Mode: 1659 * Indicates the TV Mode used on an analog TV connector. The value 1660 * of this property can be one of the following: 1661 * 1662 * NTSC: 1663 * TV Mode is CCIR System M (aka 525-lines) together with 1664 * the NTSC Color Encoding. 1665 * 1666 * NTSC-443: 1667 * 1668 * TV Mode is CCIR System M (aka 525-lines) together with 1669 * the NTSC Color Encoding, but with a color subcarrier 1670 * frequency of 4.43MHz 1671 * 1672 * NTSC-J: 1673 * 1674 * TV Mode is CCIR System M (aka 525-lines) together with 1675 * the NTSC Color Encoding, but with a black level equal to 1676 * the blanking level. 1677 * 1678 * PAL: 1679 * 1680 * TV Mode is CCIR System B (aka 625-lines) together with 1681 * the PAL Color Encoding. 1682 * 1683 * PAL-M: 1684 * 1685 * TV Mode is CCIR System M (aka 525-lines) together with 1686 * the PAL Color Encoding. 1687 * 1688 * PAL-N: 1689 * 1690 * TV Mode is CCIR System N together with the PAL Color 1691 * Encoding, a color subcarrier frequency of 3.58MHz, the 1692 * SECAM color space, and narrower channels than other PAL 1693 * variants. 1694 * 1695 * SECAM: 1696 * 1697 * TV Mode is CCIR System B (aka 625-lines) together with 1698 * the SECAM Color Encoding. 1699 * 1700 * Drivers can set up this property by calling 1701 * drm_mode_create_tv_properties(). 1702 */ 1703 1704 /** 1705 * drm_connector_attach_content_type_property - attach content-type property 1706 * @connector: connector to attach content type property on. 1707 * 1708 * Called by a driver the first time a HDMI connector is made. 1709 * 1710 * Returns: %0 1711 */ 1712 int drm_connector_attach_content_type_property(struct drm_connector *connector) 1713 { 1714 if (!drm_mode_create_content_type_property(connector->dev)) 1715 drm_object_attach_property(&connector->base, 1716 connector->dev->mode_config.content_type_property, 1717 DRM_MODE_CONTENT_TYPE_NO_DATA); 1718 return 0; 1719 } 1720 EXPORT_SYMBOL(drm_connector_attach_content_type_property); 1721 1722 /** 1723 * drm_connector_attach_tv_margin_properties - attach TV connector margin 1724 * properties 1725 * @connector: DRM connector 1726 * 1727 * Called by a driver when it needs to attach TV margin props to a connector. 1728 * Typically used on SDTV and HDMI connectors. 1729 */ 1730 void drm_connector_attach_tv_margin_properties(struct drm_connector *connector) 1731 { 1732 struct drm_device *dev = connector->dev; 1733 1734 drm_object_attach_property(&connector->base, 1735 dev->mode_config.tv_left_margin_property, 1736 0); 1737 drm_object_attach_property(&connector->base, 1738 dev->mode_config.tv_right_margin_property, 1739 0); 1740 drm_object_attach_property(&connector->base, 1741 dev->mode_config.tv_top_margin_property, 1742 0); 1743 drm_object_attach_property(&connector->base, 1744 dev->mode_config.tv_bottom_margin_property, 1745 0); 1746 } 1747 EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties); 1748 1749 /** 1750 * drm_mode_create_tv_margin_properties - create TV connector margin properties 1751 * @dev: DRM device 1752 * 1753 * Called by a driver's HDMI connector initialization routine, this function 1754 * creates the TV margin properties for a given device. No need to call this 1755 * function for an SDTV connector, it's already called from 1756 * drm_mode_create_tv_properties_legacy(). 1757 * 1758 * Returns: 1759 * 0 on success or a negative error code on failure. 1760 */ 1761 int drm_mode_create_tv_margin_properties(struct drm_device *dev) 1762 { 1763 if (dev->mode_config.tv_left_margin_property) 1764 return 0; 1765 1766 dev->mode_config.tv_left_margin_property = 1767 drm_property_create_range(dev, 0, "left margin", 0, 100); 1768 if (!dev->mode_config.tv_left_margin_property) 1769 return -ENOMEM; 1770 1771 dev->mode_config.tv_right_margin_property = 1772 drm_property_create_range(dev, 0, "right margin", 0, 100); 1773 if (!dev->mode_config.tv_right_margin_property) 1774 return -ENOMEM; 1775 1776 dev->mode_config.tv_top_margin_property = 1777 drm_property_create_range(dev, 0, "top margin", 0, 100); 1778 if (!dev->mode_config.tv_top_margin_property) 1779 return -ENOMEM; 1780 1781 dev->mode_config.tv_bottom_margin_property = 1782 drm_property_create_range(dev, 0, "bottom margin", 0, 100); 1783 if (!dev->mode_config.tv_bottom_margin_property) 1784 return -ENOMEM; 1785 1786 return 0; 1787 } 1788 EXPORT_SYMBOL(drm_mode_create_tv_margin_properties); 1789 1790 /** 1791 * drm_mode_create_tv_properties_legacy - create TV specific connector properties 1792 * @dev: DRM device 1793 * @num_modes: number of different TV formats (modes) supported 1794 * @modes: array of pointers to strings containing name of each format 1795 * 1796 * Called by a driver's TV initialization routine, this function creates 1797 * the TV specific connector properties for a given device. Caller is 1798 * responsible for allocating a list of format names and passing them to 1799 * this routine. 1800 * 1801 * NOTE: This functions registers the deprecated "mode" connector 1802 * property to select the analog TV mode (ie, NTSC, PAL, etc.). New 1803 * drivers must use drm_mode_create_tv_properties() instead. 1804 * 1805 * Returns: 1806 * 0 on success or a negative error code on failure. 1807 */ 1808 int drm_mode_create_tv_properties_legacy(struct drm_device *dev, 1809 unsigned int num_modes, 1810 const char * const modes[]) 1811 { 1812 struct drm_property *tv_selector; 1813 struct drm_property *tv_subconnector; 1814 unsigned int i; 1815 1816 if (dev->mode_config.tv_select_subconnector_property) 1817 return 0; 1818 1819 /* 1820 * Basic connector properties 1821 */ 1822 tv_selector = drm_property_create_enum(dev, 0, 1823 "select subconnector", 1824 drm_tv_select_enum_list, 1825 ARRAY_SIZE(drm_tv_select_enum_list)); 1826 if (!tv_selector) 1827 goto nomem; 1828 1829 dev->mode_config.tv_select_subconnector_property = tv_selector; 1830 1831 tv_subconnector = 1832 drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, 1833 "subconnector", 1834 drm_tv_subconnector_enum_list, 1835 ARRAY_SIZE(drm_tv_subconnector_enum_list)); 1836 if (!tv_subconnector) 1837 goto nomem; 1838 dev->mode_config.tv_subconnector_property = tv_subconnector; 1839 1840 /* 1841 * Other, TV specific properties: margins & TV modes. 1842 */ 1843 if (drm_mode_create_tv_margin_properties(dev)) 1844 goto nomem; 1845 1846 if (num_modes) { 1847 dev->mode_config.legacy_tv_mode_property = 1848 drm_property_create(dev, DRM_MODE_PROP_ENUM, 1849 "mode", num_modes); 1850 if (!dev->mode_config.legacy_tv_mode_property) 1851 goto nomem; 1852 1853 for (i = 0; i < num_modes; i++) 1854 drm_property_add_enum(dev->mode_config.legacy_tv_mode_property, 1855 i, modes[i]); 1856 } 1857 1858 dev->mode_config.tv_brightness_property = 1859 drm_property_create_range(dev, 0, "brightness", 0, 100); 1860 if (!dev->mode_config.tv_brightness_property) 1861 goto nomem; 1862 1863 dev->mode_config.tv_contrast_property = 1864 drm_property_create_range(dev, 0, "contrast", 0, 100); 1865 if (!dev->mode_config.tv_contrast_property) 1866 goto nomem; 1867 1868 dev->mode_config.tv_flicker_reduction_property = 1869 drm_property_create_range(dev, 0, "flicker reduction", 0, 100); 1870 if (!dev->mode_config.tv_flicker_reduction_property) 1871 goto nomem; 1872 1873 dev->mode_config.tv_overscan_property = 1874 drm_property_create_range(dev, 0, "overscan", 0, 100); 1875 if (!dev->mode_config.tv_overscan_property) 1876 goto nomem; 1877 1878 dev->mode_config.tv_saturation_property = 1879 drm_property_create_range(dev, 0, "saturation", 0, 100); 1880 if (!dev->mode_config.tv_saturation_property) 1881 goto nomem; 1882 1883 dev->mode_config.tv_hue_property = 1884 drm_property_create_range(dev, 0, "hue", 0, 100); 1885 if (!dev->mode_config.tv_hue_property) 1886 goto nomem; 1887 1888 return 0; 1889 nomem: 1890 return -ENOMEM; 1891 } 1892 EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy); 1893 1894 /** 1895 * drm_mode_create_tv_properties - create TV specific connector properties 1896 * @dev: DRM device 1897 * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*) 1898 * 1899 * Called by a driver's TV initialization routine, this function creates 1900 * the TV specific connector properties for a given device. 1901 * 1902 * Returns: 1903 * 0 on success or a negative error code on failure. 1904 */ 1905 int drm_mode_create_tv_properties(struct drm_device *dev, 1906 unsigned int supported_tv_modes) 1907 { 1908 struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX]; 1909 struct drm_property *tv_mode; 1910 unsigned int i, len = 0; 1911 1912 if (dev->mode_config.tv_mode_property) 1913 return 0; 1914 1915 for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) { 1916 if (!(supported_tv_modes & BIT(i))) 1917 continue; 1918 1919 tv_mode_list[len].type = i; 1920 tv_mode_list[len].name = drm_get_tv_mode_name(i); 1921 len++; 1922 } 1923 1924 tv_mode = drm_property_create_enum(dev, 0, "TV mode", 1925 tv_mode_list, len); 1926 if (!tv_mode) 1927 return -ENOMEM; 1928 1929 dev->mode_config.tv_mode_property = tv_mode; 1930 1931 return drm_mode_create_tv_properties_legacy(dev, 0, NULL); 1932 } 1933 EXPORT_SYMBOL(drm_mode_create_tv_properties); 1934 1935 /** 1936 * drm_mode_create_scaling_mode_property - create scaling mode property 1937 * @dev: DRM device 1938 * 1939 * Called by a driver the first time it's needed, must be attached to desired 1940 * connectors. 1941 * 1942 * Atomic drivers should use drm_connector_attach_scaling_mode_property() 1943 * instead to correctly assign &drm_connector_state.scaling_mode 1944 * in the atomic state. 1945 * 1946 * Returns: %0 1947 */ 1948 int drm_mode_create_scaling_mode_property(struct drm_device *dev) 1949 { 1950 struct drm_property *scaling_mode; 1951 1952 if (dev->mode_config.scaling_mode_property) 1953 return 0; 1954 1955 scaling_mode = 1956 drm_property_create_enum(dev, 0, "scaling mode", 1957 drm_scaling_mode_enum_list, 1958 ARRAY_SIZE(drm_scaling_mode_enum_list)); 1959 1960 dev->mode_config.scaling_mode_property = scaling_mode; 1961 1962 return 0; 1963 } 1964 EXPORT_SYMBOL(drm_mode_create_scaling_mode_property); 1965 1966 /** 1967 * DOC: Variable refresh properties 1968 * 1969 * Variable refresh rate capable displays can dynamically adjust their 1970 * refresh rate by extending the duration of their vertical front porch 1971 * until page flip or timeout occurs. This can reduce or remove stuttering 1972 * and latency in scenarios where the page flip does not align with the 1973 * vblank interval. 1974 * 1975 * An example scenario would be an application flipping at a constant rate 1976 * of 48Hz on a 60Hz display. The page flip will frequently miss the vblank 1977 * interval and the same contents will be displayed twice. This can be 1978 * observed as stuttering for content with motion. 1979 * 1980 * If variable refresh rate was active on a display that supported a 1981 * variable refresh range from 35Hz to 60Hz no stuttering would be observable 1982 * for the example scenario. The minimum supported variable refresh rate of 1983 * 35Hz is below the page flip frequency and the vertical front porch can 1984 * be extended until the page flip occurs. The vblank interval will be 1985 * directly aligned to the page flip rate. 1986 * 1987 * Not all userspace content is suitable for use with variable refresh rate. 1988 * Large and frequent changes in vertical front porch duration may worsen 1989 * perceived stuttering for input sensitive applications. 1990 * 1991 * Panel brightness will also vary with vertical front porch duration. Some 1992 * panels may have noticeable differences in brightness between the minimum 1993 * vertical front porch duration and the maximum vertical front porch duration. 1994 * Large and frequent changes in vertical front porch duration may produce 1995 * observable flickering for such panels. 1996 * 1997 * Userspace control for variable refresh rate is supported via properties 1998 * on the &drm_connector and &drm_crtc objects. 1999 * 2000 * "vrr_capable": 2001 * Optional &drm_connector boolean property that drivers should attach 2002 * with drm_connector_attach_vrr_capable_property() on connectors that 2003 * could support variable refresh rates. Drivers should update the 2004 * property value by calling drm_connector_set_vrr_capable_property(). 2005 * 2006 * Absence of the property should indicate absence of support. 2007 * 2008 * "VRR_ENABLED": 2009 * Default &drm_crtc boolean property that notifies the driver that the 2010 * content on the CRTC is suitable for variable refresh rate presentation. 2011 * The driver will take this property as a hint to enable variable 2012 * refresh rate support if the receiver supports it, ie. if the 2013 * "vrr_capable" property is true on the &drm_connector object. The 2014 * vertical front porch duration will be extended until page-flip or 2015 * timeout when enabled. 2016 * 2017 * The minimum vertical front porch duration is defined as the vertical 2018 * front porch duration for the current mode. 2019 * 2020 * The maximum vertical front porch duration is greater than or equal to 2021 * the minimum vertical front porch duration. The duration is derived 2022 * from the minimum supported variable refresh rate for the connector. 2023 * 2024 * The driver may place further restrictions within these minimum 2025 * and maximum bounds. 2026 */ 2027 2028 /** 2029 * drm_connector_attach_vrr_capable_property - creates the 2030 * vrr_capable property 2031 * @connector: connector to create the vrr_capable property on. 2032 * 2033 * This is used by atomic drivers to add support for querying 2034 * variable refresh rate capability for a connector. 2035 * 2036 * Returns: 2037 * Zero on success, negative errno on failure. 2038 */ 2039 int drm_connector_attach_vrr_capable_property( 2040 struct drm_connector *connector) 2041 { 2042 struct drm_device *dev = connector->dev; 2043 struct drm_property *prop; 2044 2045 if (!connector->vrr_capable_property) { 2046 prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE, 2047 "vrr_capable"); 2048 if (!prop) 2049 return -ENOMEM; 2050 2051 connector->vrr_capable_property = prop; 2052 drm_object_attach_property(&connector->base, prop, 0); 2053 } 2054 2055 return 0; 2056 } 2057 EXPORT_SYMBOL(drm_connector_attach_vrr_capable_property); 2058 2059 /** 2060 * drm_connector_attach_scaling_mode_property - attach atomic scaling mode property 2061 * @connector: connector to attach scaling mode property on. 2062 * @scaling_mode_mask: or'ed mask of BIT(%DRM_MODE_SCALE_\*). 2063 * 2064 * This is used to add support for scaling mode to atomic drivers. 2065 * The scaling mode will be set to &drm_connector_state.scaling_mode 2066 * and can be used from &drm_connector_helper_funcs->atomic_check for validation. 2067 * 2068 * This is the atomic version of drm_mode_create_scaling_mode_property(). 2069 * 2070 * Returns: 2071 * Zero on success, negative errno on failure. 2072 */ 2073 int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, 2074 u32 scaling_mode_mask) 2075 { 2076 struct drm_device *dev = connector->dev; 2077 struct drm_property *scaling_mode_property; 2078 int i; 2079 const unsigned valid_scaling_mode_mask = 2080 (1U << ARRAY_SIZE(drm_scaling_mode_enum_list)) - 1; 2081 2082 if (WARN_ON(hweight32(scaling_mode_mask) < 2 || 2083 scaling_mode_mask & ~valid_scaling_mode_mask)) 2084 return -EINVAL; 2085 2086 scaling_mode_property = 2087 drm_property_create(dev, DRM_MODE_PROP_ENUM, "scaling mode", 2088 hweight32(scaling_mode_mask)); 2089 2090 if (!scaling_mode_property) 2091 return -ENOMEM; 2092 2093 for (i = 0; i < ARRAY_SIZE(drm_scaling_mode_enum_list); i++) { 2094 int ret; 2095 2096 if (!(BIT(i) & scaling_mode_mask)) 2097 continue; 2098 2099 ret = drm_property_add_enum(scaling_mode_property, 2100 drm_scaling_mode_enum_list[i].type, 2101 drm_scaling_mode_enum_list[i].name); 2102 2103 if (ret) { 2104 drm_property_destroy(dev, scaling_mode_property); 2105 2106 return ret; 2107 } 2108 } 2109 2110 drm_object_attach_property(&connector->base, 2111 scaling_mode_property, 0); 2112 2113 connector->scaling_mode_property = scaling_mode_property; 2114 2115 return 0; 2116 } 2117 EXPORT_SYMBOL(drm_connector_attach_scaling_mode_property); 2118 2119 /** 2120 * drm_mode_create_aspect_ratio_property - create aspect ratio property 2121 * @dev: DRM device 2122 * 2123 * Called by a driver the first time it's needed, must be attached to desired 2124 * connectors. 2125 * 2126 * Returns: 2127 * Zero on success, negative errno on failure. 2128 */ 2129 int drm_mode_create_aspect_ratio_property(struct drm_device *dev) 2130 { 2131 if (dev->mode_config.aspect_ratio_property) 2132 return 0; 2133 2134 dev->mode_config.aspect_ratio_property = 2135 drm_property_create_enum(dev, 0, "aspect ratio", 2136 drm_aspect_ratio_enum_list, 2137 ARRAY_SIZE(drm_aspect_ratio_enum_list)); 2138 2139 if (dev->mode_config.aspect_ratio_property == NULL) 2140 return -ENOMEM; 2141 2142 return 0; 2143 } 2144 EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); 2145 2146 /** 2147 * DOC: standard connector properties 2148 * 2149 * Colorspace: 2150 * This property helps select a suitable colorspace based on the sink 2151 * capability. Modern sink devices support wider gamut like BT2020. 2152 * This helps switch to BT2020 mode if the BT2020 encoded video stream 2153 * is being played by the user, same for any other colorspace. Thereby 2154 * giving a good visual experience to users. 2155 * 2156 * The expectation from userspace is that it should parse the EDID 2157 * and get supported colorspaces. Use this property and switch to the 2158 * one supported. Sink supported colorspaces should be retrieved by 2159 * userspace from EDID and driver will not explicitly expose them. 2160 * 2161 * Basically the expectation from userspace is: 2162 * - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink 2163 * colorspace 2164 * - Set this new property to let the sink know what it 2165 * converted the CRTC output to. 2166 * - This property is just to inform sink what colorspace 2167 * source is trying to drive. 2168 * 2169 * Because between HDMI and DP have different colorspaces, 2170 * drm_mode_create_hdmi_colorspace_property() is used for HDMI connector and 2171 * drm_mode_create_dp_colorspace_property() is used for DP connector. 2172 */ 2173 2174 static int drm_mode_create_colorspace_property(struct drm_connector *connector, 2175 u32 supported_colorspaces) 2176 { 2177 struct drm_device *dev = connector->dev; 2178 u32 colorspaces = supported_colorspaces | BIT(DRM_MODE_COLORIMETRY_DEFAULT); 2179 struct drm_prop_enum_list enum_list[DRM_MODE_COLORIMETRY_COUNT]; 2180 int i, len; 2181 2182 if (connector->colorspace_property) 2183 return 0; 2184 2185 if (!supported_colorspaces) { 2186 drm_err(dev, "No supported colorspaces provded on [CONNECTOR:%d:%s]\n", 2187 connector->base.id, connector->name); 2188 return -EINVAL; 2189 } 2190 2191 if ((supported_colorspaces & -BIT(DRM_MODE_COLORIMETRY_COUNT)) != 0) { 2192 drm_err(dev, "Unknown colorspace provded on [CONNECTOR:%d:%s]\n", 2193 connector->base.id, connector->name); 2194 return -EINVAL; 2195 } 2196 2197 len = 0; 2198 for (i = 0; i < DRM_MODE_COLORIMETRY_COUNT; i++) { 2199 if ((colorspaces & BIT(i)) == 0) 2200 continue; 2201 2202 enum_list[len].type = i; 2203 enum_list[len].name = colorspace_names[i]; 2204 len++; 2205 } 2206 2207 connector->colorspace_property = 2208 drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, "Colorspace", 2209 enum_list, 2210 len); 2211 2212 if (!connector->colorspace_property) 2213 return -ENOMEM; 2214 2215 return 0; 2216 } 2217 2218 /** 2219 * drm_mode_create_hdmi_colorspace_property - create hdmi colorspace property 2220 * @connector: connector to create the Colorspace property on. 2221 * @supported_colorspaces: bitmap of supported color spaces 2222 * 2223 * Called by a driver the first time it's needed, must be attached to desired 2224 * HDMI connectors. 2225 * 2226 * Returns: 2227 * Zero on success, negative errno on failure. 2228 */ 2229 int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector, 2230 u32 supported_colorspaces) 2231 { 2232 u32 colorspaces; 2233 2234 if (supported_colorspaces) 2235 colorspaces = supported_colorspaces & hdmi_colorspaces; 2236 else 2237 colorspaces = hdmi_colorspaces; 2238 2239 return drm_mode_create_colorspace_property(connector, colorspaces); 2240 } 2241 EXPORT_SYMBOL(drm_mode_create_hdmi_colorspace_property); 2242 2243 /** 2244 * drm_mode_create_dp_colorspace_property - create dp colorspace property 2245 * @connector: connector to create the Colorspace property on. 2246 * @supported_colorspaces: bitmap of supported color spaces 2247 * 2248 * Called by a driver the first time it's needed, must be attached to desired 2249 * DP connectors. 2250 * 2251 * Returns: 2252 * Zero on success, negative errno on failure. 2253 */ 2254 int drm_mode_create_dp_colorspace_property(struct drm_connector *connector, 2255 u32 supported_colorspaces) 2256 { 2257 u32 colorspaces; 2258 2259 if (supported_colorspaces) 2260 colorspaces = supported_colorspaces & dp_colorspaces; 2261 else 2262 colorspaces = dp_colorspaces; 2263 2264 return drm_mode_create_colorspace_property(connector, colorspaces); 2265 } 2266 EXPORT_SYMBOL(drm_mode_create_dp_colorspace_property); 2267 2268 /** 2269 * drm_mode_create_content_type_property - create content type property 2270 * @dev: DRM device 2271 * 2272 * Called by a driver the first time it's needed, must be attached to desired 2273 * connectors. 2274 * 2275 * Returns: 2276 * Zero on success, negative errno on failure. 2277 */ 2278 int drm_mode_create_content_type_property(struct drm_device *dev) 2279 { 2280 if (dev->mode_config.content_type_property) 2281 return 0; 2282 2283 dev->mode_config.content_type_property = 2284 drm_property_create_enum(dev, 0, "content type", 2285 drm_content_type_enum_list, 2286 ARRAY_SIZE(drm_content_type_enum_list)); 2287 2288 if (dev->mode_config.content_type_property == NULL) 2289 return -ENOMEM; 2290 2291 return 0; 2292 } 2293 EXPORT_SYMBOL(drm_mode_create_content_type_property); 2294 2295 /** 2296 * drm_mode_create_suggested_offset_properties - create suggests offset properties 2297 * @dev: DRM device 2298 * 2299 * Create the suggested x/y offset property for connectors. 2300 * 2301 * Returns: 2302 * 0 on success or a negative error code on failure. 2303 */ 2304 int drm_mode_create_suggested_offset_properties(struct drm_device *dev) 2305 { 2306 if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property) 2307 return 0; 2308 2309 dev->mode_config.suggested_x_property = 2310 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff); 2311 2312 dev->mode_config.suggested_y_property = 2313 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff); 2314 2315 if (dev->mode_config.suggested_x_property == NULL || 2316 dev->mode_config.suggested_y_property == NULL) 2317 return -ENOMEM; 2318 return 0; 2319 } 2320 EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties); 2321 2322 /** 2323 * drm_connector_set_path_property - set tile property on connector 2324 * @connector: connector to set property on. 2325 * @path: path to use for property; must not be NULL. 2326 * 2327 * This creates a property to expose to userspace to specify a 2328 * connector path. This is mainly used for DisplayPort MST where 2329 * connectors have a topology and we want to allow userspace to give 2330 * them more meaningful names. 2331 * 2332 * Returns: 2333 * Zero on success, negative errno on failure. 2334 */ 2335 int drm_connector_set_path_property(struct drm_connector *connector, 2336 const char *path) 2337 { 2338 struct drm_device *dev = connector->dev; 2339 int ret; 2340 2341 ret = drm_property_replace_global_blob(dev, 2342 &connector->path_blob_ptr, 2343 strlen(path) + 1, 2344 path, 2345 &connector->base, 2346 dev->mode_config.path_property); 2347 return ret; 2348 } 2349 EXPORT_SYMBOL(drm_connector_set_path_property); 2350 2351 /** 2352 * drm_connector_set_tile_property - set tile property on connector 2353 * @connector: connector to set property on. 2354 * 2355 * This looks up the tile information for a connector, and creates a 2356 * property for userspace to parse if it exists. The property is of 2357 * the form of 8 integers using ':' as a separator. 2358 * This is used for dual port tiled displays with DisplayPort SST 2359 * or DisplayPort MST connectors. 2360 * 2361 * Returns: 2362 * Zero on success, errno on failure. 2363 */ 2364 int drm_connector_set_tile_property(struct drm_connector *connector) 2365 { 2366 struct drm_device *dev = connector->dev; 2367 char tile[256]; 2368 int ret; 2369 2370 if (!connector->has_tile) { 2371 ret = drm_property_replace_global_blob(dev, 2372 &connector->tile_blob_ptr, 2373 0, 2374 NULL, 2375 &connector->base, 2376 dev->mode_config.tile_property); 2377 return ret; 2378 } 2379 2380 snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d", 2381 connector->tile_group->id, connector->tile_is_single_monitor, 2382 connector->num_h_tile, connector->num_v_tile, 2383 connector->tile_h_loc, connector->tile_v_loc, 2384 connector->tile_h_size, connector->tile_v_size); 2385 2386 ret = drm_property_replace_global_blob(dev, 2387 &connector->tile_blob_ptr, 2388 strlen(tile) + 1, 2389 tile, 2390 &connector->base, 2391 dev->mode_config.tile_property); 2392 return ret; 2393 } 2394 EXPORT_SYMBOL(drm_connector_set_tile_property); 2395 2396 /** 2397 * drm_connector_set_link_status_property - Set link status property of a connector 2398 * @connector: drm connector 2399 * @link_status: new value of link status property (0: Good, 1: Bad) 2400 * 2401 * In usual working scenario, this link status property will always be set to 2402 * "GOOD". If something fails during or after a mode set, the kernel driver 2403 * may set this link status property to "BAD". The caller then needs to send a 2404 * hotplug uevent for userspace to re-check the valid modes through 2405 * GET_CONNECTOR_IOCTL and retry modeset. 2406 * 2407 * Note: Drivers cannot rely on userspace to support this property and 2408 * issue a modeset. As such, they may choose to handle issues (like 2409 * re-training a link) without userspace's intervention. 2410 * 2411 * The reason for adding this property is to handle link training failures, but 2412 * it is not limited to DP or link training. For example, if we implement 2413 * asynchronous setcrtc, this property can be used to report any failures in that. 2414 */ 2415 void drm_connector_set_link_status_property(struct drm_connector *connector, 2416 uint64_t link_status) 2417 { 2418 struct drm_device *dev = connector->dev; 2419 2420 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); 2421 connector->state->link_status = link_status; 2422 drm_modeset_unlock(&dev->mode_config.connection_mutex); 2423 } 2424 EXPORT_SYMBOL(drm_connector_set_link_status_property); 2425 2426 /** 2427 * drm_connector_attach_max_bpc_property - attach "max bpc" property 2428 * @connector: connector to attach max bpc property on. 2429 * @min: The minimum bit depth supported by the connector. 2430 * @max: The maximum bit depth supported by the connector. 2431 * 2432 * This is used to add support for limiting the bit depth on a connector. 2433 * 2434 * Returns: 2435 * Zero on success, negative errno on failure. 2436 */ 2437 int drm_connector_attach_max_bpc_property(struct drm_connector *connector, 2438 int min, int max) 2439 { 2440 struct drm_device *dev = connector->dev; 2441 struct drm_property *prop; 2442 2443 prop = connector->max_bpc_property; 2444 if (!prop) { 2445 prop = drm_property_create_range(dev, 0, "max bpc", min, max); 2446 if (!prop) 2447 return -ENOMEM; 2448 2449 connector->max_bpc_property = prop; 2450 } 2451 2452 drm_object_attach_property(&connector->base, prop, max); 2453 connector->state->max_requested_bpc = max; 2454 connector->state->max_bpc = max; 2455 2456 return 0; 2457 } 2458 EXPORT_SYMBOL(drm_connector_attach_max_bpc_property); 2459 2460 /** 2461 * drm_connector_attach_hdr_output_metadata_property - attach "HDR_OUTPUT_METADA" property 2462 * @connector: connector to attach the property on. 2463 * 2464 * This is used to allow the userspace to send HDR Metadata to the 2465 * driver. 2466 * 2467 * Returns: 2468 * Zero on success, negative errno on failure. 2469 */ 2470 int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector) 2471 { 2472 struct drm_device *dev = connector->dev; 2473 struct drm_property *prop = dev->mode_config.hdr_output_metadata_property; 2474 2475 drm_object_attach_property(&connector->base, prop, 0); 2476 2477 return 0; 2478 } 2479 EXPORT_SYMBOL(drm_connector_attach_hdr_output_metadata_property); 2480 2481 /** 2482 * drm_connector_attach_colorspace_property - attach "Colorspace" property 2483 * @connector: connector to attach the property on. 2484 * 2485 * This is used to allow the userspace to signal the output colorspace 2486 * to the driver. 2487 * 2488 * Returns: 2489 * Zero on success, negative errno on failure. 2490 */ 2491 int drm_connector_attach_colorspace_property(struct drm_connector *connector) 2492 { 2493 struct drm_property *prop = connector->colorspace_property; 2494 2495 drm_object_attach_property(&connector->base, prop, DRM_MODE_COLORIMETRY_DEFAULT); 2496 2497 return 0; 2498 } 2499 EXPORT_SYMBOL(drm_connector_attach_colorspace_property); 2500 2501 /** 2502 * drm_connector_atomic_hdr_metadata_equal - checks if the hdr metadata changed 2503 * @old_state: old connector state to compare 2504 * @new_state: new connector state to compare 2505 * 2506 * This is used by HDR-enabled drivers to test whether the HDR metadata 2507 * have changed between two different connector state (and thus probably 2508 * requires a full blown mode change). 2509 * 2510 * Returns: 2511 * True if the metadata are equal, False otherwise 2512 */ 2513 bool drm_connector_atomic_hdr_metadata_equal(struct drm_connector_state *old_state, 2514 struct drm_connector_state *new_state) 2515 { 2516 struct drm_property_blob *old_blob = old_state->hdr_output_metadata; 2517 struct drm_property_blob *new_blob = new_state->hdr_output_metadata; 2518 2519 if (!old_blob || !new_blob) 2520 return old_blob == new_blob; 2521 2522 if (old_blob->length != new_blob->length) 2523 return false; 2524 2525 return !memcmp(old_blob->data, new_blob->data, old_blob->length); 2526 } 2527 EXPORT_SYMBOL(drm_connector_atomic_hdr_metadata_equal); 2528 2529 /** 2530 * drm_connector_set_vrr_capable_property - sets the variable refresh rate 2531 * capable property for a connector 2532 * @connector: drm connector 2533 * @capable: True if the connector is variable refresh rate capable 2534 * 2535 * Should be used by atomic drivers to update the indicated support for 2536 * variable refresh rate over a connector. 2537 */ 2538 void drm_connector_set_vrr_capable_property( 2539 struct drm_connector *connector, bool capable) 2540 { 2541 if (!connector->vrr_capable_property) 2542 return; 2543 2544 drm_object_property_set_value(&connector->base, 2545 connector->vrr_capable_property, 2546 capable); 2547 } 2548 EXPORT_SYMBOL(drm_connector_set_vrr_capable_property); 2549 2550 /** 2551 * drm_connector_set_panel_orientation - sets the connector's panel_orientation 2552 * @connector: connector for which to set the panel-orientation property. 2553 * @panel_orientation: drm_panel_orientation value to set 2554 * 2555 * This function sets the connector's panel_orientation and attaches 2556 * a "panel orientation" property to the connector. 2557 * 2558 * Calling this function on a connector where the panel_orientation has 2559 * already been set is a no-op (e.g. the orientation has been overridden with 2560 * a kernel commandline option). 2561 * 2562 * It is allowed to call this function with a panel_orientation of 2563 * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op. 2564 * 2565 * The function shouldn't be called in panel after drm is registered (i.e. 2566 * drm_dev_register() is called in drm). 2567 * 2568 * Returns: 2569 * Zero on success, negative errno on failure. 2570 */ 2571 int drm_connector_set_panel_orientation( 2572 struct drm_connector *connector, 2573 enum drm_panel_orientation panel_orientation) 2574 { 2575 struct drm_device *dev = connector->dev; 2576 struct drm_display_info *info = &connector->display_info; 2577 struct drm_property *prop; 2578 2579 /* Already set? */ 2580 if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) 2581 return 0; 2582 2583 /* Don't attach the property if the orientation is unknown */ 2584 if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN) 2585 return 0; 2586 2587 info->panel_orientation = panel_orientation; 2588 2589 prop = dev->mode_config.panel_orientation_property; 2590 if (!prop) { 2591 prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, 2592 "panel orientation", 2593 drm_panel_orientation_enum_list, 2594 ARRAY_SIZE(drm_panel_orientation_enum_list)); 2595 if (!prop) 2596 return -ENOMEM; 2597 2598 dev->mode_config.panel_orientation_property = prop; 2599 } 2600 2601 drm_object_attach_property(&connector->base, prop, 2602 info->panel_orientation); 2603 return 0; 2604 } 2605 EXPORT_SYMBOL(drm_connector_set_panel_orientation); 2606 2607 /** 2608 * drm_connector_set_panel_orientation_with_quirk - set the 2609 * connector's panel_orientation after checking for quirks 2610 * @connector: connector for which to init the panel-orientation property. 2611 * @panel_orientation: drm_panel_orientation value to set 2612 * @width: width in pixels of the panel, used for panel quirk detection 2613 * @height: height in pixels of the panel, used for panel quirk detection 2614 * 2615 * Like drm_connector_set_panel_orientation(), but with a check for platform 2616 * specific (e.g. DMI based) quirks overriding the passed in panel_orientation. 2617 * 2618 * Returns: 2619 * Zero on success, negative errno on failure. 2620 */ 2621 int drm_connector_set_panel_orientation_with_quirk( 2622 struct drm_connector *connector, 2623 enum drm_panel_orientation panel_orientation, 2624 int width, int height) 2625 { 2626 int orientation_quirk; 2627 2628 orientation_quirk = drm_get_panel_orientation_quirk(width, height); 2629 if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) 2630 panel_orientation = orientation_quirk; 2631 2632 return drm_connector_set_panel_orientation(connector, 2633 panel_orientation); 2634 } 2635 EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk); 2636 2637 /** 2638 * drm_connector_set_orientation_from_panel - 2639 * set the connector's panel_orientation from panel's callback. 2640 * @connector: connector for which to init the panel-orientation property. 2641 * @panel: panel that can provide orientation information. 2642 * 2643 * Drm drivers should call this function before drm_dev_register(). 2644 * Orientation is obtained from panel's .get_orientation() callback. 2645 * 2646 * Returns: 2647 * Zero on success, negative errno on failure. 2648 */ 2649 int drm_connector_set_orientation_from_panel( 2650 struct drm_connector *connector, 2651 struct drm_panel *panel) 2652 { 2653 enum drm_panel_orientation orientation; 2654 2655 if (panel && panel->funcs && panel->funcs->get_orientation) 2656 orientation = panel->funcs->get_orientation(panel); 2657 else 2658 orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; 2659 2660 return drm_connector_set_panel_orientation(connector, orientation); 2661 } 2662 EXPORT_SYMBOL(drm_connector_set_orientation_from_panel); 2663 2664 static const struct drm_prop_enum_list privacy_screen_enum[] = { 2665 { PRIVACY_SCREEN_DISABLED, "Disabled" }, 2666 { PRIVACY_SCREEN_ENABLED, "Enabled" }, 2667 { PRIVACY_SCREEN_DISABLED_LOCKED, "Disabled-locked" }, 2668 { PRIVACY_SCREEN_ENABLED_LOCKED, "Enabled-locked" }, 2669 }; 2670 2671 /** 2672 * drm_connector_create_privacy_screen_properties - create the drm connecter's 2673 * privacy-screen properties. 2674 * @connector: connector for which to create the privacy-screen properties 2675 * 2676 * This function creates the "privacy-screen sw-state" and "privacy-screen 2677 * hw-state" properties for the connector. They are not attached. 2678 */ 2679 void 2680 drm_connector_create_privacy_screen_properties(struct drm_connector *connector) 2681 { 2682 if (connector->privacy_screen_sw_state_property) 2683 return; 2684 2685 /* Note sw-state only supports the first 2 values of the enum */ 2686 connector->privacy_screen_sw_state_property = 2687 drm_property_create_enum(connector->dev, DRM_MODE_PROP_ENUM, 2688 "privacy-screen sw-state", 2689 privacy_screen_enum, 2); 2690 2691 connector->privacy_screen_hw_state_property = 2692 drm_property_create_enum(connector->dev, 2693 DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_ENUM, 2694 "privacy-screen hw-state", 2695 privacy_screen_enum, 2696 ARRAY_SIZE(privacy_screen_enum)); 2697 } 2698 EXPORT_SYMBOL(drm_connector_create_privacy_screen_properties); 2699 2700 /** 2701 * drm_connector_attach_privacy_screen_properties - attach the drm connecter's 2702 * privacy-screen properties. 2703 * @connector: connector on which to attach the privacy-screen properties 2704 * 2705 * This function attaches the "privacy-screen sw-state" and "privacy-screen 2706 * hw-state" properties to the connector. The initial state of both is set 2707 * to "Disabled". 2708 */ 2709 void 2710 drm_connector_attach_privacy_screen_properties(struct drm_connector *connector) 2711 { 2712 if (!connector->privacy_screen_sw_state_property) 2713 return; 2714 2715 drm_object_attach_property(&connector->base, 2716 connector->privacy_screen_sw_state_property, 2717 PRIVACY_SCREEN_DISABLED); 2718 2719 drm_object_attach_property(&connector->base, 2720 connector->privacy_screen_hw_state_property, 2721 PRIVACY_SCREEN_DISABLED); 2722 } 2723 EXPORT_SYMBOL(drm_connector_attach_privacy_screen_properties); 2724 2725 static void drm_connector_update_privacy_screen_properties( 2726 struct drm_connector *connector, bool set_sw_state) 2727 { 2728 enum drm_privacy_screen_status sw_state, hw_state; 2729 2730 drm_privacy_screen_get_state(connector->privacy_screen, 2731 &sw_state, &hw_state); 2732 2733 if (set_sw_state) 2734 connector->state->privacy_screen_sw_state = sw_state; 2735 drm_object_property_set_value(&connector->base, 2736 connector->privacy_screen_hw_state_property, hw_state); 2737 } 2738 2739 static int drm_connector_privacy_screen_notifier( 2740 struct notifier_block *nb, unsigned long action, void *data) 2741 { 2742 struct drm_connector *connector = 2743 container_of(nb, struct drm_connector, privacy_screen_notifier); 2744 struct drm_device *dev = connector->dev; 2745 2746 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); 2747 drm_connector_update_privacy_screen_properties(connector, true); 2748 drm_modeset_unlock(&dev->mode_config.connection_mutex); 2749 2750 drm_sysfs_connector_property_event(connector, 2751 connector->privacy_screen_sw_state_property); 2752 drm_sysfs_connector_property_event(connector, 2753 connector->privacy_screen_hw_state_property); 2754 2755 return NOTIFY_DONE; 2756 } 2757 2758 /** 2759 * drm_connector_attach_privacy_screen_provider - attach a privacy-screen to 2760 * the connector 2761 * @connector: connector to attach the privacy-screen to 2762 * @priv: drm_privacy_screen to attach 2763 * 2764 * Create and attach the standard privacy-screen properties and register 2765 * a generic notifier for generating sysfs-connector-status-events 2766 * on external changes to the privacy-screen status. 2767 * This function takes ownership of the passed in drm_privacy_screen and will 2768 * call drm_privacy_screen_put() on it when the connector is destroyed. 2769 */ 2770 void drm_connector_attach_privacy_screen_provider( 2771 struct drm_connector *connector, struct drm_privacy_screen *priv) 2772 { 2773 connector->privacy_screen = priv; 2774 connector->privacy_screen_notifier.notifier_call = 2775 drm_connector_privacy_screen_notifier; 2776 2777 drm_connector_create_privacy_screen_properties(connector); 2778 drm_connector_update_privacy_screen_properties(connector, true); 2779 drm_connector_attach_privacy_screen_properties(connector); 2780 } 2781 EXPORT_SYMBOL(drm_connector_attach_privacy_screen_provider); 2782 2783 /** 2784 * drm_connector_update_privacy_screen - update connector's privacy-screen sw-state 2785 * @connector_state: connector-state to update the privacy-screen for 2786 * 2787 * This function calls drm_privacy_screen_set_sw_state() on the connector's 2788 * privacy-screen. 2789 * 2790 * If the connector has no privacy-screen, then this is a no-op. 2791 */ 2792 void drm_connector_update_privacy_screen(const struct drm_connector_state *connector_state) 2793 { 2794 struct drm_connector *connector = connector_state->connector; 2795 int ret; 2796 2797 if (!connector->privacy_screen) 2798 return; 2799 2800 ret = drm_privacy_screen_set_sw_state(connector->privacy_screen, 2801 connector_state->privacy_screen_sw_state); 2802 if (ret) { 2803 drm_err(connector->dev, "Error updating privacy-screen sw_state\n"); 2804 return; 2805 } 2806 2807 /* The hw_state property value may have changed, update it. */ 2808 drm_connector_update_privacy_screen_properties(connector, false); 2809 } 2810 EXPORT_SYMBOL(drm_connector_update_privacy_screen); 2811 2812 int drm_connector_set_obj_prop(struct drm_mode_object *obj, 2813 struct drm_property *property, 2814 uint64_t value) 2815 { 2816 int ret = -EINVAL; 2817 struct drm_connector *connector = obj_to_connector(obj); 2818 2819 /* Do DPMS ourselves */ 2820 if (property == connector->dev->mode_config.dpms_property) { 2821 ret = (*connector->funcs->dpms)(connector, (int)value); 2822 } else if (connector->funcs->set_property) 2823 ret = connector->funcs->set_property(connector, property, value); 2824 2825 if (!ret) 2826 drm_object_property_set_value(&connector->base, property, value); 2827 return ret; 2828 } 2829 2830 int drm_connector_property_set_ioctl(struct drm_device *dev, 2831 void *data, struct drm_file *file_priv) 2832 { 2833 struct drm_mode_connector_set_property *conn_set_prop = data; 2834 struct drm_mode_obj_set_property obj_set_prop = { 2835 .value = conn_set_prop->value, 2836 .prop_id = conn_set_prop->prop_id, 2837 .obj_id = conn_set_prop->connector_id, 2838 .obj_type = DRM_MODE_OBJECT_CONNECTOR 2839 }; 2840 2841 /* It does all the locking and checking we need */ 2842 return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv); 2843 } 2844 2845 static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector) 2846 { 2847 /* For atomic drivers only state objects are synchronously updated and 2848 * protected by modeset locks, so check those first. 2849 */ 2850 if (connector->state) 2851 return connector->state->best_encoder; 2852 return connector->encoder; 2853 } 2854 2855 static bool 2856 drm_mode_expose_to_userspace(const struct drm_display_mode *mode, 2857 const struct list_head *modes, 2858 const struct drm_file *file_priv) 2859 { 2860 /* 2861 * If user-space hasn't configured the driver to expose the stereo 3D 2862 * modes, don't expose them. 2863 */ 2864 if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode)) 2865 return false; 2866 /* 2867 * If user-space hasn't configured the driver to expose the modes 2868 * with aspect-ratio, don't expose them. However if such a mode 2869 * is unique, let it be exposed, but reset the aspect-ratio flags 2870 * while preparing the list of user-modes. 2871 */ 2872 if (!file_priv->aspect_ratio_allowed) { 2873 const struct drm_display_mode *mode_itr; 2874 2875 list_for_each_entry(mode_itr, modes, head) { 2876 if (mode_itr->expose_to_userspace && 2877 drm_mode_match(mode_itr, mode, 2878 DRM_MODE_MATCH_TIMINGS | 2879 DRM_MODE_MATCH_CLOCK | 2880 DRM_MODE_MATCH_FLAGS | 2881 DRM_MODE_MATCH_3D_FLAGS)) 2882 return false; 2883 } 2884 } 2885 2886 return true; 2887 } 2888 2889 int drm_mode_getconnector(struct drm_device *dev, void *data, 2890 struct drm_file *file_priv) 2891 { 2892 struct drm_mode_get_connector *out_resp = data; 2893 struct drm_connector *connector; 2894 struct drm_encoder *encoder; 2895 struct drm_display_mode *mode; 2896 int mode_count = 0; 2897 int encoders_count = 0; 2898 int ret = 0; 2899 int copied = 0; 2900 struct drm_mode_modeinfo u_mode; 2901 struct drm_mode_modeinfo __user *mode_ptr; 2902 uint32_t __user *encoder_ptr; 2903 bool is_current_master; 2904 2905 if (!drm_core_check_feature(dev, DRIVER_MODESET)) 2906 return -EOPNOTSUPP; 2907 2908 memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo)); 2909 2910 connector = drm_connector_lookup(dev, file_priv, out_resp->connector_id); 2911 if (!connector) 2912 return -ENOENT; 2913 2914 encoders_count = hweight32(connector->possible_encoders); 2915 2916 if ((out_resp->count_encoders >= encoders_count) && encoders_count) { 2917 copied = 0; 2918 encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr); 2919 2920 drm_connector_for_each_possible_encoder(connector, encoder) { 2921 if (put_user(encoder->base.id, encoder_ptr + copied)) { 2922 ret = -EFAULT; 2923 goto out; 2924 } 2925 copied++; 2926 } 2927 } 2928 out_resp->count_encoders = encoders_count; 2929 2930 out_resp->connector_id = connector->base.id; 2931 out_resp->connector_type = connector->connector_type; 2932 out_resp->connector_type_id = connector->connector_type_id; 2933 2934 is_current_master = drm_is_current_master(file_priv); 2935 2936 mutex_lock(&dev->mode_config.mutex); 2937 if (out_resp->count_modes == 0) { 2938 if (is_current_master) 2939 connector->funcs->fill_modes(connector, 2940 dev->mode_config.max_width, 2941 dev->mode_config.max_height); 2942 else 2943 drm_dbg_kms(dev, "User-space requested a forced probe on [CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe\n", 2944 connector->base.id, connector->name); 2945 } 2946 2947 out_resp->mm_width = connector->display_info.width_mm; 2948 out_resp->mm_height = connector->display_info.height_mm; 2949 out_resp->subpixel = connector->display_info.subpixel_order; 2950 out_resp->connection = connector->status; 2951 2952 /* delayed so we get modes regardless of pre-fill_modes state */ 2953 list_for_each_entry(mode, &connector->modes, head) { 2954 WARN_ON(mode->expose_to_userspace); 2955 2956 if (drm_mode_expose_to_userspace(mode, &connector->modes, 2957 file_priv)) { 2958 mode->expose_to_userspace = true; 2959 mode_count++; 2960 } 2961 } 2962 2963 /* 2964 * This ioctl is called twice, once to determine how much space is 2965 * needed, and the 2nd time to fill it. 2966 */ 2967 if ((out_resp->count_modes >= mode_count) && mode_count) { 2968 copied = 0; 2969 mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr; 2970 list_for_each_entry(mode, &connector->modes, head) { 2971 if (!mode->expose_to_userspace) 2972 continue; 2973 2974 /* Clear the tag for the next time around */ 2975 mode->expose_to_userspace = false; 2976 2977 drm_mode_convert_to_umode(&u_mode, mode); 2978 /* 2979 * Reset aspect ratio flags of user-mode, if modes with 2980 * aspect-ratio are not supported. 2981 */ 2982 if (!file_priv->aspect_ratio_allowed) 2983 u_mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; 2984 if (copy_to_user(mode_ptr + copied, 2985 &u_mode, sizeof(u_mode))) { 2986 ret = -EFAULT; 2987 2988 /* 2989 * Clear the tag for the rest of 2990 * the modes for the next time around. 2991 */ 2992 list_for_each_entry_continue(mode, &connector->modes, head) 2993 mode->expose_to_userspace = false; 2994 2995 mutex_unlock(&dev->mode_config.mutex); 2996 2997 goto out; 2998 } 2999 copied++; 3000 } 3001 } else { 3002 /* Clear the tag for the next time around */ 3003 list_for_each_entry(mode, &connector->modes, head) 3004 mode->expose_to_userspace = false; 3005 } 3006 3007 out_resp->count_modes = mode_count; 3008 mutex_unlock(&dev->mode_config.mutex); 3009 3010 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); 3011 encoder = drm_connector_get_encoder(connector); 3012 if (encoder) 3013 out_resp->encoder_id = encoder->base.id; 3014 else 3015 out_resp->encoder_id = 0; 3016 3017 /* Only grab properties after probing, to make sure EDID and other 3018 * properties reflect the latest status. 3019 */ 3020 ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic, 3021 (uint32_t __user *)(unsigned long)(out_resp->props_ptr), 3022 (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr), 3023 &out_resp->count_props); 3024 drm_modeset_unlock(&dev->mode_config.connection_mutex); 3025 3026 out: 3027 drm_connector_put(connector); 3028 3029 return ret; 3030 } 3031 3032 /** 3033 * drm_connector_find_by_fwnode - Find a connector based on the associated fwnode 3034 * @fwnode: fwnode for which to find the matching drm_connector 3035 * 3036 * This functions looks up a drm_connector based on its associated fwnode. When 3037 * a connector is found a reference to the connector is returned. The caller must 3038 * call drm_connector_put() to release this reference when it is done with the 3039 * connector. 3040 * 3041 * Returns: A reference to the found connector or an ERR_PTR(). 3042 */ 3043 struct drm_connector *drm_connector_find_by_fwnode(struct fwnode_handle *fwnode) 3044 { 3045 struct drm_connector *connector, *found = ERR_PTR(-ENODEV); 3046 3047 if (!fwnode) 3048 return ERR_PTR(-ENODEV); 3049 3050 mutex_lock(&connector_list_lock); 3051 3052 list_for_each_entry(connector, &connector_list, global_connector_list_entry) { 3053 if (connector->fwnode == fwnode || 3054 (connector->fwnode && connector->fwnode->secondary == fwnode)) { 3055 drm_connector_get(connector); 3056 found = connector; 3057 break; 3058 } 3059 } 3060 3061 mutex_unlock(&connector_list_lock); 3062 3063 return found; 3064 } 3065 3066 /** 3067 * drm_connector_oob_hotplug_event - Report out-of-band hotplug event to connector 3068 * @connector_fwnode: fwnode_handle to report the event on 3069 * @status: hot plug detect logical state 3070 * 3071 * On some hardware a hotplug event notification may come from outside the display 3072 * driver / device. An example of this is some USB Type-C setups where the hardware 3073 * muxes the DisplayPort data and aux-lines but does not pass the altmode HPD 3074 * status bit to the GPU's DP HPD pin. 3075 * 3076 * This function can be used to report these out-of-band events after obtaining 3077 * a drm_connector reference through calling drm_connector_find_by_fwnode(). 3078 */ 3079 void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode, 3080 enum drm_connector_status status) 3081 { 3082 struct drm_connector *connector; 3083 3084 connector = drm_connector_find_by_fwnode(connector_fwnode); 3085 if (IS_ERR(connector)) 3086 return; 3087 3088 if (connector->funcs->oob_hotplug_event) 3089 connector->funcs->oob_hotplug_event(connector, status); 3090 3091 drm_connector_put(connector); 3092 } 3093 EXPORT_SYMBOL(drm_connector_oob_hotplug_event); 3094 3095 3096 /** 3097 * DOC: Tile group 3098 * 3099 * Tile groups are used to represent tiled monitors with a unique integer 3100 * identifier. Tiled monitors using DisplayID v1.3 have a unique 8-byte handle, 3101 * we store this in a tile group, so we have a common identifier for all tiles 3102 * in a monitor group. The property is called "TILE". Drivers can manage tile 3103 * groups using drm_mode_create_tile_group(), drm_mode_put_tile_group() and 3104 * drm_mode_get_tile_group(). But this is only needed for internal panels where 3105 * the tile group information is exposed through a non-standard way. 3106 */ 3107 3108 static void drm_tile_group_free(struct kref *kref) 3109 { 3110 struct drm_tile_group *tg = container_of(kref, struct drm_tile_group, refcount); 3111 struct drm_device *dev = tg->dev; 3112 3113 mutex_lock(&dev->mode_config.idr_mutex); 3114 idr_remove(&dev->mode_config.tile_idr, tg->id); 3115 mutex_unlock(&dev->mode_config.idr_mutex); 3116 kfree(tg); 3117 } 3118 3119 /** 3120 * drm_mode_put_tile_group - drop a reference to a tile group. 3121 * @dev: DRM device 3122 * @tg: tile group to drop reference to. 3123 * 3124 * drop reference to tile group and free if 0. 3125 */ 3126 void drm_mode_put_tile_group(struct drm_device *dev, 3127 struct drm_tile_group *tg) 3128 { 3129 kref_put(&tg->refcount, drm_tile_group_free); 3130 } 3131 EXPORT_SYMBOL(drm_mode_put_tile_group); 3132 3133 /** 3134 * drm_mode_get_tile_group - get a reference to an existing tile group 3135 * @dev: DRM device 3136 * @topology: 8-bytes unique per monitor. 3137 * 3138 * Use the unique bytes to get a reference to an existing tile group. 3139 * 3140 * RETURNS: 3141 * tile group or NULL if not found. 3142 */ 3143 struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, 3144 const char topology[8]) 3145 { 3146 struct drm_tile_group *tg; 3147 int id; 3148 3149 mutex_lock(&dev->mode_config.idr_mutex); 3150 idr_for_each_entry(&dev->mode_config.tile_idr, tg, id) { 3151 if (!memcmp(tg->group_data, topology, 8)) { 3152 if (!kref_get_unless_zero(&tg->refcount)) 3153 tg = NULL; 3154 mutex_unlock(&dev->mode_config.idr_mutex); 3155 return tg; 3156 } 3157 } 3158 mutex_unlock(&dev->mode_config.idr_mutex); 3159 return NULL; 3160 } 3161 EXPORT_SYMBOL(drm_mode_get_tile_group); 3162 3163 /** 3164 * drm_mode_create_tile_group - create a tile group from a displayid description 3165 * @dev: DRM device 3166 * @topology: 8-bytes unique per monitor. 3167 * 3168 * Create a tile group for the unique monitor, and get a unique 3169 * identifier for the tile group. 3170 * 3171 * RETURNS: 3172 * new tile group or NULL. 3173 */ 3174 struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, 3175 const char topology[8]) 3176 { 3177 struct drm_tile_group *tg; 3178 int ret; 3179 3180 tg = kzalloc(sizeof(*tg), GFP_KERNEL); 3181 if (!tg) 3182 return NULL; 3183 3184 kref_init(&tg->refcount); 3185 memcpy(tg->group_data, topology, 8); 3186 tg->dev = dev; 3187 3188 mutex_lock(&dev->mode_config.idr_mutex); 3189 ret = idr_alloc(&dev->mode_config.tile_idr, tg, 1, 0, GFP_KERNEL); 3190 if (ret >= 0) { 3191 tg->id = ret; 3192 } else { 3193 kfree(tg); 3194 tg = NULL; 3195 } 3196 3197 mutex_unlock(&dev->mode_config.idr_mutex); 3198 return tg; 3199 } 3200 EXPORT_SYMBOL(drm_mode_create_tile_group); 3201